Xbox battery charging

Module based on:TP4056 The module can manage battery charging and discharging, and also has built in boost converter to boost the voltage to match load conditions Charging voltage: 4.2V DC Charging current: Max. 1A Discharging current: Max. 2A Input voltage: 4.5-8V DC Output voltage: 4.3-27V DC (Continuously adjustable) Size: 3.3x2.3cm/1.3x0.91"

Description: Details iShopping.pk brings you the best price for Elmo Huddle Space Battery Attachment with express shipping all over Pakistan.   Specifications: Dimensions 156x161x29mm Weight 330g Input DC5V/1.6A max. Output DC5V/2.1A max. Battery 3.7V/10,000mAh (Lithium-ion Polymer Battery) Charging Time Approx. 12 hours (When using the supplied AC adapter) Usable Times Up to 1000 times

  Technical Specifications Wireless Headset Circumaural Design with 50mm Driver Units Volume & Mic Control Buttons on the Headset Detachable 2.5mm Microphone Cable Dimensions: 200mm(W) * 204mm(H) * 88mm(D) Headphones Radio Frequency: 2.4GHz Wireless Range: 33ft / 10m Frequency Response: 20 - 20,000 Hz Impedance: 32O at 1kHz Sensitivity (@1kHz, 1V/Pa): 105dB +/- 2dB Drivers: 50 mm, with Neodymium Magnets Batteries: 2 AAA Batteries (Up to 12 Hours Battery Life) Charging Time: 3 Hours Microphone Frequency Response: 130 - 10,000 Hz Sensitivity (@1kHz, 1V/Pa): -42 ± 2dB Signal-to-Noise Ratio: >55 dB Pick-up Pattern: Uni-directional Hardware Requirements Xbox 360® Composite Cable (or Component HD AV Cable) PC 3.5mm Headphone and Mic Cables* Available 3.5mm Headphone Jack Available 3.5mm Microphone Jack * 3.5mm headphone and mic cables required and sold separately    

  Technical Specifications Wireless Headset Circumaural Design with 50mm Driver Units Volume & Mic Control Buttons on the Headset 3 Preset EQ Detachable 2.5mm Microphone Cable Dimensions: 200mm(W) * 204mm(H) * 88mm(D) Inner Ear Cup Diameter: 55 mm / 2.16” Approximate Weight (including batteries): 369 g / 0.81 lbs Headphones Radio Frequency: 5.8GHz Dolby® Headphone / Dolby Pro Logic® II / Dolby Digital Wireless Range: 33ft / 10m Frequency Response: 20 - 20,000 Hz Impedance: 32O at 1kHz Sensitivity (@1kHz, 1V/Pa): 105dB +/- 2dB Drivers: 50 mm, with Neodymium Magnets Batteries: 2 AAA Batteries (Up to 8 Hours Battery Life) Charging Time: 3 Hours Microphone Frequency Response: 130 - 10,000 Hz Sensitivity (@1kHz, 1V/Pa): -42 ± 2dB Signal-to-Noise Ratio: >55 dB Pick-up Pattern: Uni-directional Hardware Requirements Xbox 360® Available Optical Port PC RCA to 3.5mm Cable* Available 3.5mm Headphone Jack Available 3.5mm Microphone Jack * RCA to 3.5mm cable required and sold separately    

Using the module:Connect micro USB cable for power, or 5V DC to pads marked IN+ and IN- on the left-hand side of the module Connect cell to charge to B+/B- pads on the right-hand side of the module. A load (something for the battery to power) can be connected to the OUT+/OUT- pads on the right-hand side Important! Disconnect load when charging The red LED indicates charging in progress, the green LED indicates charging has finished. Never charge your battery at a rate greater than 1C. 2. It is better thanthe charging current is 37% of the battery capacity. If you charge the battery of 1000mAh, acurrent of 400mAh is enough. 3. The connection wire should not be too thick. 4. Make sure the connect point is good. 5. If the input voltage is too high, like 5.2v, the current will be less than 1000mA, it is normal. It is a protection function, auto-subtract the charging current to avoid burn damage to thechip. 6. NO Reverse polarity.Features:Led indicator: red is charging Green is fully charged. Current Protection: Yes Inversed polarity: NO. Use mature charging chip TP4056 for simple peripheral circuits, good protection performance, and high charging accuracy. Fully machinery automated processing, all patch parts manufacturing.

DESCRIPTION Features: This is the mobile power module Accessories, 18650 Circuit board shell. Meet the individual needs of your DIY, but you must understand basic electronic assembly. Motherboard comes with protection function: Charging overcharge protection, over-discharge protection, overcurrent protection. Intelligent output device after charging full, automatically stop charging, to prevent mobile phones overcharge. Output voltage and current stable, will not harm user devices. Specifications: Micro USB input: 5V 1A USB Output: 5V 2.1A / 5V 1A(Dual USB interface) Charging display: intelligent digital display Batteries Type: liquid lithium-ion batteries (18650) Product Size: 57mm x 28mm Screen size:27mm x 17mm Installation instructions: The circuit board is connected to the battery negative B-, B + is the positive, do not connecting reversed, connecting reversed will burn the board, the battery is connected in parallel welding, assembling battery. Note that the insulation between the battery and the circuit board, battery lead not to touch the circuit board, so as not to cause a short circuit. Package included: 1 x Mobile Power Bank 18650 Battery Charger PCB Mention that you found this ad on DealMarkaz.pk when you call.

Description: Details iShopping.pk brings you the best price for Shure Networked 2-Port Charging Station (MXWNCS2) with express shipping all over Pakistan.   The MXWNCS2 Networked 2-Port Charging Station from Shure is capable of charging MXW1 and MXW6 microphone transmitters (not compatible with MXW8 gooseneck microphones). It also links the microphones to access point channels and networks battery statistics to the control software.   Features: Charge Status Indicators 5-segment LEDs on the unit display charge status individually for every docked microphone transmitter Remote Charge Status Monitoring Ethernet connection to the system enables remote monitoring of battery charge status in hours and minutes via Microflex Wireless Control Software or third-party control systems Easy Transmitter Linking Assign docked wireless microphones to channels on an access point transceiver by simply pressing "Link Rapid Charge Times Reaches 50% charge in one hour and fully charges transmitters in two hours Overcharge Protection Smart recharging circuitry safeguards against battery damage and extends life cycles

Portable Mini Fan Usb Charging rechargable battery 3 speed Chargeable Fan with Mini light. Can be used while charging or unplugged if charged Charges with 5 volt mobile charger. small cable and 18650 battery included. Indication for charging and fan speed. Good for Work desk, Car, etc

Manage the constant current to constant voltage charging of a connected lithium battery Over-discharge protection - keeps your battery from being discharged below 2.4V, a healthy minimum voltage level for your batteryIf a connected battery has been discharged below 2.4V the module will cut output power from the battery until the battery voltage has been re-charged above 3.0V (the over-discharge release voltage), which at that time the module will again allow discharge of power from the battery to a connected load. Although the module cuts output power from the battery during an over-discharge situation, it still allows charging of the battery to occur through the parasitic diode of the discharge control MOSFET (FS8205A Dual MOSFET). Overcharge protection - the module will safely charge your battery to 4.2V Overcurrent and short-circuit protection - the module will cut the output from the battery if the discharge rate exceeds 3A or if a short-circuit condition occurs Soft-start protection limits inrush current Trickle charge (battery reconditioning) - if the voltage level of the connected battery is less than 2.9V, the module will use a trickle charge current of 130mA until the battery voltage reaches 2.9V, at which point the charge current will be linearly increased to the configured charge current.

APNI BATTERY KO DEIN NEW LIFE AND BACKUP For Lead Batteries Power Enhancement BPP working is very simple. Once you add BPP to your battery and put the battery on charging, the heat passing through the battery plates help dissolve BPP from a layer and breaking down the sulphation. How to Use? You must shake well before using.Please avoid contact with metals and direct sunlight.Please do wear safety glasses while working around batteries.Add BPP to battery according to Dosage Chart below.Please give 48 hours of charging to the battery after using BPP, while you may also continue to normal use while BPP keeps working in the background to improve your battery performance. Please always wash hands with soap after use. https://www.facebook.com/batterypowerpluss FOR DELIVERY:

Description: Details iShopping.pk brings you the best price for Shure 4-Port Networked Charging Station (MXWNCS4) with express shipping all over Pakistan.   The  MXWNCS4 4-Port Networked Charging Station  from Shure is designed to provide networked charging for up to 4 Microflex wireless transmitter units. Thanks to its networking abilities, the MXWNCS4 can display charge time info to networked computers in addition to being able to assign channels to docked transmitters.   Features: • Station accepts all Microflex Wireless transmitters • Charge status indicators: 5-segment LEDs on the unit display charge status individually for every docked microphone • Remote charge status monitoring: Ethernet connection to the system enables remote monitoring of battery charge status in hours and minutes via the control software or third party control systems • Transmitter linking: Assign docked wireless microphones to channels on an Access Point Transceiver by simply pressing "link" • Rapid charge times: Reaches 50% charge in one hour and fully charges transmitters in two hours • Overcharge protection: Smart recharging circuitry safeguards against battery damage and extends life cycles   Specifications: Charge Time MXW1, MXW6, MXW8: 50% = 1 hour, 100% = 2 hours  MXW2: 50% = 1.5 hours, 100% = 3 hours Network Interface 10/100 Mbps Ethernet Power Requirement 15 V DC @ 3.3 A maximum, supplied by external power supply (tip positive) Housing Molded plastic, cast zinc Dimensions (HxWxD) 2.7 x 7.5 x 7.25" (68 x 191 x 184 mm) Weight 3.7 lb (1.7 kg)

100% New and High Quality Micro USB TP4056 Dual Charging Module Input Voltage: 4.35V - 6V (recommended voltage 5v) Chargingcut-off Voltage: 4.2V (± 1%) Maximum Charging Current Output: 1000mA (1A) Battery Discharge Protection Voltage: 3.0V Charging Status LEDs:Red LED Charging, Green LED Fully Charged Note: The installation and usgae of these modules require some basic knowledge of electronics, if you dont know how to install, please don't buy it.

❆Stylish Hands-free Design❆: This creative neck portable fan can be hung around your neck and release your hands for a more convenient job. The dual fan head has a 360° flexible rotation design for a more powerful airflow. Can be used as a table fan to enhance indoor air circulation. Suitable for outdoor sports, fishing, golf, travel, camping, office, indoor, hiking, cycling，baby carriage and more. ❆Double Fan Head and Seven Blades❆: The portable neck fan is made of environmentally friendly ABS fireproof material. Each fan head combines 7 bionic fan blades to make the blade softer, more durable and quieter. Transmit more wind for you. ❆USB Charging Fan❆: This personal portable fan has a built-in 2000 mAh rechargeable battery that is compatible with laptops, portable chargers or devices with USB outputs. 4-8 hours of working time. (depends on the operating mode of the neck fan) ❆Available in Three Speeds❆: the personal portable neck hands-free fan has a low/medium/high speed mode that adjusts the wind to suit your needs. The lightweight weight won't make your neck feel sore. Let you enjoy the cool wind in the hot summer months. ❆Quality Assurance❆: If you have any dissatisfaction with the portable wearable neck fan after receiving the neck fan, please contact us and we will solve the problem or refund within 24 hours. (Use a wearable neck fan to lead the fashion trend.) ❆Stylish Hands-free Design❆: This creative neck portable fan can be hung around your neck and release your hands for a more convenient job. The dual fan head has a 360° flexible rotation design for a more powerful airflow. Can be used as a table fan to enhance indoor air circulation. Suitable for outdoor sports, fishing, golf, travel, camping, office, indoor, hiking, cycling，baby carriage and more. ❆Double Fan Head and Seven Blades❆: The portable neck fan is made of environmentally friendly ABS fireproof material. Each fan head combines 7 bionic fan blades to make the blade softer, more durable and quieter. Transmit more wind for you. ❆USB Charging Fan❆: This personal portable fan has a built-in 2000 mAh rechargeable battery that is compatible with laptops, portable chargers or devices with USB outputs. 4-8 hours of working time. (depends on the operating mode of the neck fan) ❆Available in Three Speeds❆: the personal portable neck hands-free fan has a low/medium/high speed mode that adjusts the wind to suit your needs. The lightweight weight won't make your neck feel sore. Let you enjoy the cool wind in the hot summer months. ❆Quality Assurance❆: If you have any dissatisfaction with the portable wearable neck fan after receiving the neck fan, please contact us and we will solve the problem or refund within 24 hours. (Use a wearable neck fan to lead the fashion trend.)

Features: LED lighting function. 3 mode speed regulation. Adopted 4.5W brushless motor industrial grade fan (4 inch), strong winds and long life. The battery bin is a detachable structure, which is convenient for users to use or replace the battery. USB interface charging or 18650 battery power supply.

Module name: 3S 12.6V Li-ion Lithium Battery 18650 Charger Protection Board Suitable range: For nominal voltage 3.6V 3.7V lithium battery(Including 18650,26650, lithium polymer batteries) Charging voltage: 12.6V Maximum output current: 20A Maximum output power / charging power: 252W Color: green material: plastic Product size:59*20*3.4mm Product weight: 4.4g Package Contents: 1 PCS x 3 string 12.6V 20A 18650 lithium battery protection board Precautions: 1.Strictly according to the diagram wiring: 0V/4.2V/8.4V/12.6V,Otherwise it will cause damage to the chip. 2.After connection,it need to first charge activation, then will have the output.