Wall mains plug

CAT6 HIGH PERFORMANCE STANDARD: The technology and function of this CAT6 unshielded keystone jack has higher performance than the TIA/EIA and ISO CAT6 standard, fits for patch panels, surface mount boxes or wall plates (face plates). HIGH QUALITY MATIRIAL & TECHNOLOGY - Gold plated contacts which prevent the oxidization and easy snap-in retaining clip ensure a secure and corrosion free connection. R0HS STANDARD: Supports T568A and T568B wiring with color coded 110 blocks. It Supports 110 or Krone dual type termination and accepts 22 or 26 AWG solid Ethernet cables. DOUBLE FEMALE RJ45 PLUG: This inline coupler connects two separate category 5e/6 cables (depending on type you bought) through a RJ45 keystone coupler. Double female cat6 keystone can be used with Cat.6, Cat5, CAT5e Ethernet cables. COMPACT DESIGN & MULTIFUNCTIONS: Keystone Snap-in Cat6 couplers provide a full range of solutions for voice, home networking, home office, audio, video and more. It works with any wallplates and blank patch panels.

Product Description           D-Link AC1200 DualBand Extender,wall plug 2 external antenna Wireless AC speeds of up to 1300 Mbps Dual-Band connectivity reduces interference Features D-Link Wi-Fi Mesh technology - Works with compatible routers to create a mesh network Signal strength indicator helps find the optimum location for installation Gigabit Ethernet port to create a Wi-Fi access point or connect a wired device Extend Your Wi‑Fi The DAP-1620 AC1300 Wi-Fi Range Extender is a portable, plug-in Wi-Fi repeater that lets you extend an existing wireless network. You can place it anywhere in your home to increase the range of your wireless network. Tiny yet powerful, it supports Wireless AC speeds of up to 1300 Mbps 1, and fits in the palm of your hand. You’ve Got Your Wi-Fi Now Boost It The AC1300 Wi-Fi Range Extender works with any compatible router to give your Wi-Fi coverage the boost it deserves. Tiny yet powerful, it supports wireless AC speeds of up to 1300 Mbps, yet fits in the palm of your hand. Gigabit Port Add wireless connectivity to computers, games consoles and smart TVs, or add Wi-Fi to a wired network. Signal Strength Indicator Find the best placement for your extender with the intelligent LED indicator. AC1300 Speeds Combined Wi-Fi speeds of up to 400 Mbps (2.4 GHz) + 867 Mbps (5 GHz). Wi-Fi Mesh Get a more dynamic, future-ready mesh network with advanced Wi-Fi Mesh functionality. Future-Ready Your Mesh With Wi-Fi Mesh The AC1300 Wi-Fi Range Extender combines with compatible D-Link Wi-Fi routers 1  to bring you Wi-Fi Mesh – our signature mesh that turbocharges your whole home network with a ton of advanced features that add massive functionality to your mesh network. Feel the future of mesh with Wi-Fi Mesh today!  Learn More      Go to Demo    Extend Your Wireless Network Dual-band technology helps reduce interference from nearby wireless transmitters in the home, and also provides backward compatibility with older wireless devices in your network, allowing you to enjoy a blazing-fast, reliable wireless connection. Alternatively, use the built-in Gigabit Ethernet port and your home’s existing wired Ethernet cabling to extend wireless coverage without worrying about signal strength. Easy to Set Up, Easy to Use Set up is simple with the D-Link Wi-Fi app and your smartphone. Alternatively, you can use one-touch configuration by pushing the WPS push-button on the DAP-1620 and on the router or access point you want to extend, and the DAP-1620 will automatically configure itself for you. There's also includes a built-in web-based setup wizard that lets you configure it wirelessly with a PC or mobile device. Compact, Convenient Design The DAP-1620 is ideal for use at home or in a small office, and plugs directly into a wall socket, without the hassle of dealing with power cords. When it comes to placement around your home, the bright signal strength indicator LEDs make finding a suitable location a breeze. The external antennas provide improved coverage, but also fold away for ultimate portability.  1 A D-Link router supporting Wi-Fi Mesh and at least one DAP-1620 extender are required in order to create a mesh network.  SIMPLE SETUP. STEP-BY-STEP. Getting set up is a breeze. The D-Link Wi-Fi app walks you through the process one step at a time, so you can get on the tri-band mesh Wi-Fi superhighway without any hiccups.    

Designed to charge your devices for laptops with USB C PD charger. (NOTE: Charg speeds will vary depending on your device and wall charger, we recommend that you use USB-C PD Charger) Charg Requirement: 90W or higher. Square Plug to USB C cable, perfect for charg your devices with bank or USB C wall charger. Say good bye to buy an extra adapter (Only for Charg, not Syncing data.) Durable laptop connector to USB C Cable with reversible USB-C connector. 1.8meter is long enough to connecting devices while you are still charg in your bedroom, office or wherever you want. Tips: This is the adapter plug converter cable via USB Type C to laptops. You need one USB-C Adapter or bank to support it. But the USB C adapter or bank should has enough (wattage) to charge the laptop. Plase make sure the wattage for USB Type C Adapter is not lower than your laptop input (You can check the laptop input on the bottom of the laptop). For example, your laptop input for asus is 19v 4.74a 90w, your usb type c adapter is not lower than 90w,otherwise, it does not work. Not All of your USB C Adapter can fits for laptops!

PRODUCT DESCRIPTION:Branded used Original 13 Amps Fused Malaysia AC Power Cord/Cable for Computers, PC, Monitor and LCD devices. Fused with 13A fuse and 3 pin mains power lead. This AC power cord is the perfect replacement! Use this cable as a replacement cord for laptops and notebooks that require a 3-slot power cord. The 3-Slot Female connector plugs directly into your device. If the power cord for your laptop/notebook is starting to show signs of wear and tear, replace it with this New and high quality cable.

【Rich and strong stereo sound】Built-in Four Loudspeaker Diaphragm and Subwoofer Multimedia Speakers,The laptop USB speakers deliver Clear Rich and strong stereo sound for your computer, Turn your desktop computer or laptop into the ultimate sound system. This USB Powered Computer Speakers will fill the room with your music, movies, or computer games. Speaker Bluetooth 【The Compact Design】The small size allows the speakers to easily sit on your desk. And the USB power means you can take them with you and plug them directly into your computer for music on the go. Speaker Bluetooth 【One Finger Control】Turn the speakers on and the volume up with one simple control on the line of the speakers for quick access. 【Compatible with Multiple Devices】It Compatible with PC, laptops, desktop, notebooks, Kindle Fire, Speaker Bluetooth. 【Plug And Play】USB Powered and 3.5mm Audio Input,Just plug the USB cable into your device or the wall and plug the 3.5mm jack into your audio device and not need drives.

Rich and strong stereo sound: Built-in Four Loudspeaker Diaphragm and Subwoofer Multimedia Speakers,The laptop USB speakers deliver Clear Rich and strong stereo sound for your computer,Turn your desktop computer or laptop into the ultimate sound system. These USB Powered Computer Speakers will fill the room with your music, movies, or computer games.The Compact Design: The small size allows the speakers to easily sit on your desk. And the USB power means you can take them with you and plug directly into your computer for music on the go.One Finger Control: Turn the speakers on and the volume up with one simple control on the line of the speakers for quick access.Compatible with Multiple Devices: It Compatible with PC, laptops,desktop,notebooks, Kindle Fire,smart phones, tablets, MP3, MP4 and more devices.Plug And Play: USB Powered and 3.5mm Audio Input,Just plug the USB cable into your device or the wall and plug the 3.5mm jack into your audio device and not need drives.

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 128V Audio DSP Mixer with express shipping all over Pakistan.   The CONVERGE Pro 2 128V Audio DSP Mixer from ClearOne is a complete conferencing solution with 12 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in VoIP interface for 2 lines. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection. The mixer comes with built-in VoIP for VoIP conferencing. The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.   Features: Architecture • 12 mic/line inputs with AEC •  Built-in VoIP for 2 lines •  Built-in USB for PC-based conferencing Scalable Connectivity •  Standalone and daisy-chained system •  Stack up units up to 96 mic/line inputs •  Expansion bus C-Link with 64 channels •  P-Link bus to connect 6 peripherals Configuration & Management •  CONSOLE software •  Auto-discovery of devices •  Matrix View for entire system •  FlowView for visualized audio signal paths •  System monitoring and troubleshooting Audio Signal Processing •  Acoustic Echo Cancellation processing •  Distributed Echo Cancellation on every mic input •  Noise cancellation with Adaptive-Ambience •  Acoustic Intelligence with faster convergence •  DARE feedback elimination •  Microphone gating Flexible Control Options •  Dialer app for Windows, Mac, iOS, and Android •  Tabletop controller with a touch panel •  Wall controller with buttons •  Web-based controller Supports 3rd-party control modules   Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) VoIP Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation Audio: 5 lines (2 default + 3 lines through license), each line supporting 1+5 calls Sample Rate: 24 kHz Sample Bit Depth: 24-bit Codec: G.711 uLaw, G.711 ALaw, G.722 Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: Proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 48T Audio DSP Mixer with express shipping all over Pakistan.     The CONVERGE Pro 2 48T Audio DSP Mixer from ClearOne is a complete conferencing solution with 4 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in Telco interface for teleconferencing. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection.   The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.     Features: Architecture • 4 mic/line inputs with AEC •  Built-in Telco with ClearEffect processing •  Built-in USB for PC-based conferencing Scalable Connectivity •  Standalone and daisy-chained system •  Stack up units up to 96 mic/line inputs •  Expansion bus C-Link with 64 channels •  P-Link bus to connect 6 peripherals Configuration & Management •  CONSOLE software •  Auto-discovery of devices •  Matrix View for entire system •  FlowView for visualized audio signal paths •  System monitoring and troubleshooting Audio Signal Processing •  Acoustic Echo Cancellation processing •  Distributed Echo Cancellation on every mic input •  Noise cancellation with Adaptive-Ambience •  Acoustic Intelligence with faster convergence •  DARE feedback elimination •  Microphone gating Flexible Control Options •  Dialer app for Windows, Mac, iOS, and Android •  Tabletop controller with a touch panel •  Wall controller with buttons •  Web-based controller •  Supports 3rd-party control modules     Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Amplifier Output Speaker Output Port: Dual binding posts Audio: 2 x Channel Output Power: Maximum 10 W, 8 Ohms load Frequency Response: 20 Hz to 22 kHz @ +10 dBu, +/- 0.5 dBu THD + N: 20 Hz to 22 kHz @ +10 dBu, 1 W, Dynamic Range: 20 Hz to 22 kHz @ 20 dB, >102dB, with 20 kHz digital low pass filter Crosstalk: Channel to Channel, stimulus at 20 dBu, 10 W output to receptor 8⿦ load, 20 Hz to 22 kHz, Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 128T Audio DSP Mixer with express shipping all over Pakistan.   The CONVERGE Pro 2 128T Audio DSP Mixer from ClearOne is a complete conferencing solution with 12 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in Telco interface for teleconferencing. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection. The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.   Features: Architecture 12 mic/line inputs with AEC Built-in Telco with ClearEffect processing Built-in USB for PC-based conferencing Scalable Connectivity Standalone and daisy-chained system Stack up units up to 96 mic/line inputs Expansion bus C-Link with 64 channels P-Link bus to connect 6 peripherals Configuration & Management CONSOLE software Auto-discovery of devices Matrix View for entire system FlowView for visualized audio signal paths System monitoring and troubleshooting Audio Signal Processing Acoustic Echo Cancellation processing Distributed Echo Cancellation on every mic input Noise cancellation with Adaptive-Ambience Acoustic Intelligence with faster convergence DARE feedback elimination Microphone gating Flexible Control Options Dialer app for Windows, Mac, iOS, and Android Tabletop controller with a touch panel Wall controller with buttons Web-based controller Supports 3rd-party control modules   Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: Proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

UGreen Apple Watch Charger USB-A Series 7,6,5,4,3,2,1 Price in Pakistan  UGREEN Apple Watch Charger MFi Certified is a simple Apple Watch Charger compatible with all variants of Apple Watching including Apple Watch 7. As Fast as the Original Apple Charger. Apple MFi Certified: Built-in MFI certified (PPID: 219693-0102) magnetic wireless charging module,combine MagSafe technology with inductive charging; Compatible for all Apple Watch Series SE 7 6 5 4 3 2 1, Apple Watch Sport, Apple Watch Nike plus, Apple Watch Hermes, Apple Watch Edition.(Note:The non-MFI certified iWatch Charger may damage your WatchOS device) Cableless Design:No extra charging cables are needed—saves you from the hassles of tangling cables! Simply plug it into a wall charger/power bank or any other USB charging devices and charging is on the go!The keychain design allows you to hang on the keychain to prevent loss when you travel. Original Charging Speed: Offers a fast original charging speed for your Apple watch series SE 6 5 4 3 2 1; This apple watch charger cable only takes 2h to fully charge your Apple watch.The protruding bezel design prevents your watch from falling when charging. Portable & Compact: It is lightweight & portable, very convenient to charge your Apple watch while traveling. You could hang it on your bag or put into your bag to as a replacement for the old cable charger. It is a great accessory for your iWatch. Comes with a white gift lanyard. Multiple Protections: It is built-in over-current, over-voltage, short circuit, and over-temperature protection, provides you a safe environment for both watch and charger. Compatible with all of Apple Watch Series 1 Series 2 Series 3 Series 4 Series 5 Series 6 Series 7 Series SE. Portable Wireless Charger for Apple Watch   UGREEN portable wireless charger for Apple watch, fully charges your apple watch within 2 hours as fast as your original charger, and is compact and lightweight which is perfect for travel–one of the must-have apple watch accessories for your Apple Watch Series 6 5 4 3 2 1 (44mm 42mm 40mm 38mm), Apple Watch Sport, Apple Watch Nike plus, Apple Watch Hermes, Apple Watch Edition   Apple MFI Certified Watch Charger   With built-in Apple MFI certified magnetic charging module which combines Mag safe technology with inductive charging, Ugreen compact iwatch charger with unique design offers you great confidence in the techniques and user experience of the product. No need to worry about compatibility or safety issue.   Cable-free Portable Watch Charger   No hassles with cables when it comes to charging. Just plug it into any USB charging devices and charging is on the go! With sleek small and premium construction it greatly saves your space and is portable. You can hang it on your bag thanks to lanyard design or put in in your pocket or wallet and charge your watch at home or where ever you go – in your car, office or hotel. Ugreen Portable Wireless Charger for Apple Watch Getting Charging without Limitation No space limitation, no time limitation. Just plug this USB Wireless Charger to the USB port on your laptop / wall outlet for fast charging. Due to the stand, you can charge your Apple Watch in vertical or horizontal position.   Universal Compatibility for All 44mm 42mm 40mm 38mm Apple Watch Series Apple Watch Series 7: Apple Watch, Apple Watch Nike +, Apple Watch Hermès Apple Watch Series 6: Apple Watch, Apple Watch Nike +, Apple Watch Hermès Apple Watch Series 5: Apple Watch, Apple Watch Nike +, Apple Watch Hermès Apple Watch Series 4: Apple Watch, Apple Watch Nike +, Apple Watch Hermès Apple Watch Series 3: Apple Watch, Apple Watch Nike +, Apple Watch Hermès, Apple Watch Edition Apple Watch Series 2: Apple Watch, Apple Watch Nike +, Apple Watch Hermès, Apple Watch Edition Apple Watch Series 1: Apple Watch, Apple Watch Sport, Apple Watch Edition

Description: Details iShopping.pk brings you the best price for Honeywell 960H System Series 700 TVL Outdoor Mini Dome Camera (HD4D3H) with 1 year international warranty and express shipping all over Pakistan.     Specification: Operational Video Standard NTSC Image Sensor 1/3" 960H CCD Number of Pixels 976 x 494 (H x V) Lens 2.8-12mm, varifocal @ f/1.4 Iris Auto iris Minimum Illumination Color: 0.19 lux @ f/1.4, 30 IRE B&W: 0.04 lux @ f/1.4, 30 IRE Horizontal Resolution 700 TVL Video Output 1.0 V p-p, composite @ 75 Ohms Sync System 12 VDC: Internal 24 VAC: Internal/Line lock S/N Ratio 52 dB or more (AGC off) Automatic Gain Control 0 to 20, level adjustable Automatic Electronic Shutter (AES) 1/60 to 1/120,000 seconds Gamma 0.45 Sense-Up 2x to 512x 3D-DNR Off / Low / Mid / High Motion Detection 4 programmable zones Privacy Masking 8 programmable zones White Balance ATW / Push / Manual Exposure BLC & HME: Low / Mid / High Wide Dynamic Range Auto / Manual Defog Auto / Manual Electrical Input Voltage 12 VDC / 24 VAC ±10% Maximum Power Consumption 12 VDC: 8.4 W (heater on)  24 VAC: 11.0 W (heater on) Environmental Temperature Operating: -40°F to 131°F (-40°C to 55°C) Storage: -40°F to 167°F (-40°C to 75°C) Relative Humidity 10 to 100%, condensing IP Rating IP66 Regulatory Emissions FCC, Part 15B, Class A Mechanical Connector Main Video: BNC (coax)  Aux Video: 2-pin connector Power Input: 2.1 mm plug Material of Construction Housing: Die-cast aluminum Bubble: Polycarbonate Dimensions 5.74 x 4.35" (14.59 x 11.06 cm) Weight 2.5 lb (1.1 kg)   Product Description: •  700 TVL Video Resolution •  2.8-12mm Varifocal Lens •  IR Cut Filter for Night Vision •  Integrated OSD Controller •  WDR and White Balance •  Motion Detection and Privacy Mask •  3-Axis Rotation for Positioning •  Heater and Breather for Defog Capability •  Built-In Coax and UTP + 2nd Video Output •  IP66-Rated for Outdoor Use   Product Overview: The  960H System Series 700 TVL Outdoor Mini Dome Camera  from  Honeywell  utilizes a 1/3" 960H CCD image sensor to capture images at up to 700 TVL video resolution. Featuring a removable IR cut filter, the camera switches between color and B&W mode, as per changes in ambient lighting, to ensure accurate color reproduction in daylight and enhanced B&W images at night. The camera also offers DWDR, 3D DNR, backlight compensation, and highlight masking functions that help capture clear images in extremely bright or dark light conditions. Furthermore, four programmable motion detection zones and eight configurable privacy masks allow you to customize your field of view. This mini dome camera comes with an IP66-rated weatherproof and impact-resistant housing for use in outdoor locations. It is designed for wall or pendant mounting, and it easily converts to a surface or flush mount for direct installation in a ceiling or wall. The camera also features a built-in heater and breather vent for operation in areas with temperatures as low as -40°F (-40°C). An on-board OSD controller provides on-site adjustments, enabling you to easily control the camera's settings directly from the device. The camera's picture quality, true color reproduction, and enhanced low-light performance make it suitable for a range of indoor and outdoor surveillance applications including airports, university campuses, hospitals, schools, and government and commercial buildings. •  1/3" 960H CCD image sensor for up to 700 TVL video resolution •  2.8-12mm varifocal auto iris lens with automatic electronic shutter •  Removable IR cut filter for vivid color images by day and clear B&W images at night •  Low-light performance with a minimum illumination of 0.19 lux (color) and 0.04 lux (B&W) •  3D Digital Noise Reduction and WDR for taking detailed images in ambient lighting •  Backlight compensation and highlight masking image enhancements •  Up to 4 programmable motion detection zones and 8 configurable privacy masks •  Second video output and on-board OSD controller for on-site adjustments •  3-axis rotation for precise camera positioning with easy angle adjustments •  Built-in heater for use in low temperatures; breather vent prevents condensation buildup •  Can be wall or pendant mounted (mounts available separately) •  Converts to a surface or flush mount for direct installation to a ceiling or wall •  Coax and UTP built-in for simple and convenient wiring •  Compact design for quick and easy installation in a wide variety of scenarios •  IP66-rated weatherproof and impact-resistant housing for use outdoors

Key points of this Hp 215 G1 charger Fits wide range of Hp notebooks Free power cable mains adapter plug New smaller blue tip with pin in centre Genuine Hp 215 G1 45w blue tip laptop charger

DESCRIPTION Product details of 16GB USB Voice Recorder, Mini Sound Audio Recorder for Lecture Meeting Pocket Voice Recorder for Interview [Mini USB Voice Recorder]mini designed usb voice recorder it could very easy to take with you in anywhere, like your pocket, wallet, backpack. The recorder also designed with a lanyard hole that you can hang it on your key ring. Recording your lectures, meetings, interviews, cl, speeches easily. [16GB Mini Voice Recorder]The small voice recorder with 16GB internal memory, 128Kbps recording resolution, could store up to 288 hours of recorded files or 2200 songs. Built-in rechargeable 150mAh Lithium, charg 2 hours, support 6-8 hours continuous recording. No blinking lights, LEDs or sounds while recording that could provides covert recording. [Dual USB Connector]The usb voice recorder built with dual connector with both USB 2.0 and micro-USB plug. You could listen your mp3 audio recordings on Windows/Mac PC or Android devices(OTG) with micro-USB plug directly that without needing any software or USB cable. Plug the device into an USB port and it can be charged, as comter, USB power strip, wall charger, car charger and so on. [Flash Drive Voice Recorder]Voice recorder and USB flash drive 2 in 1. This voice recorder not only can record audio, it also functions as an ordinary flash drive and can store other files/docuts. When you are ready to listen to what you have recorded, ply plug it in to Windows/MAC comter or Android phone(OTG) to instantly view/listen to the files. Memory: 16GB USB: 2.0 High Speed Supported File Formats: MP3 Recording Quality: 128Kbps(up to 15 feet): Built-in 150mA lithium polymer rechargeable System Compatibility: Windows/2000/XP/7/10; Mac OS; Android (Iphone not compatible) size:70*21*9.4mm Material:plastic colour:black Package Contents: 1 * Voice Recorder 1 * User Manual Mention that you found this ad on DealMarkaz.pk when you call.

Description: Details iShopping.pk brings you the best price for D-Link N300 Wi-Fi Range Extender (DAP-1325) with express shipping all over Pakistan   Specifications:   Connectivity Wireless N gives you high-speed wireless connectivity for your devices Wireless 802.11g/b backward compatibility Wi-Fi speeds of up to 300 Mbps 10/100 Fast Ethernet Port Security WPA2/WPA wireless encryption to keep your wireless connection secure Wi-Fi Protected Setup (WPS) for secure setup with the simple press of a button Easy to Use One-piece wall plug design is compact, discreet and does not require additional power adapter and cable Built-in setup wizard and QRS Mobile app for mobile devices guide you through installation Device Interfaces 802.11n/g/b Wireless LAN 10/100 Fast Ethernet port Reset button WPS button LEDs Status/WPS 3 Segment Wi-Fi signal strength indicator Standards IEEE 802.11n IEEE 802.11g IEEE 802.11b IEEE 802.3ab Antennas Two external antennas    Plug Type Region dependent Wireless Security Wi-Fi Protected Access (WPA/WPA2) WPS (PBC) Advanced Features D-Link One-Touch Extender Setup     Device Management Supports QRS Mobile app for iPhone, iPad, iPod touch, and Android mobile devices Web UI   The DAP-1325 N300 Wi-Fi Range Extender is a portable plug-in repeater that lets you extend an existing wireless network. Simply place it anywhere in your home to extend the range of your wireless network. Supporting Wireless N, this tiny yet powerful N300 Wi-Fi Range Extender gives you connection speeds of up to 300 Mbps, while still being backwards compatible with your existing wireless devices. Extend Your Wireless Network Increase the coverage of your home wireless network with the sleek and easy-to-use DAP-1325 N300 Wi-Fi Range Extender. N300 technology helps to extend wireless range in your home or office and also provides backward compatibility with older wireless devices in your network, allowing you to enjoy a fast, reliable wireless connection. Alternatively, use the built-in Fast Ethernet port and your home’s existing wired Ethernet cabling to extend wireless coverage without worrying about signal strength. Easy to Set Up, Easy to Use Setting up the N300 Wi-Fi Range Extender is simple. Just use the one-touch configuration function by pushing the WPS push-button on the DAP-1325 and on the router or AP you want to extend, and the DAP-1325 will automatically configure itself for you. Alternatively, you can use the supported QRS Mobile app on your iPhone, iPad, or iPod touch, or Android mobile device to set up the DAP-1325 easily without needing a computer. The N300 Wi-Fi Range Extender even includes a built-in setup wizard that lets you configure it both wired and wirelessly with a PC or mobile device. Compact, Convenient Design The DAP-1325’s compact design and intuitive setup makes it perfect for use at home or in a small office. Simply plug it in and use the bright signal indicator LED to find the best location to extend your network. Its diminutive wall-plug design saves you the hassle of dealing with a power cord and its sleek, unobtrusive appearance blends easily into the decor of any home or office.  

Description: Details iShopping.pk brings you the best price for Amped Wireless Titan-Ap High Power Dual Band AC1900 Wireless Access Point (APA1900) with 1 year international warranty and express shipping all over Pakistan.   The  TITAN-AP  adds long range Wi-Fi access to any existing network. Built with a 1GHz Dual-Core Processor, 14 high power amplifiers, and 4 high gain antennas, the  TITAN-AP  delivers superior Wi-Fi performance with ultimate coverage. It provides unmatched coverage, speed, and reliability for the busiest networks. Blazing-fast AC1900 Wi-Fi technology delivers up to 1900Mbps of Wi-Fi speed, making slow downloads and video buffering a thing of the past. With advanced 4 Antenna-Rx Technology, the  TITAN-AP  provides stable and strong connections for all of your devices. Plug and Play set up makes it easy to install. Upgrade your network with the  TITAN-AP  to go further, move faster and do more.   Specifications: Wireless Standard: 802.11a/b/g/n/ac Frequency Band: 2.4/5GHz Simultaneous Wireless Speed: 2.4GHz: 600Mbps 5GHz: 1300Mbps Amplifiers: 3 x 2.4GHz Amplifiers 3 x 5GHz Amplifiers 8 x Low Noise Amplifiers Processor: 1GHz Dual-Core Processor Memory: 128MB DDR3 Wireless Coverage Control: 15% - 100% Output Power (Individually adjustable for 2.4GHz and 5GHz networks) Antennas: 4 x Detachable High Gain 5dBi Dual Band Antennas Ports: 1 x RJ-45 10/100/1000M WAN Port (Network Port) 4 x RJ-45 10/100/1000M LAN Ports (Local Ports) 1 x USB 3.0 Port for USB Storage 1 x USB 2.0 Port for USB Storage Power Adapter Rating: Switching Adapter, Input: 100-240v, Output: 12v, 2.5A Mounting: Wall or Desktop Setup Requirements: A router or network switch with an available network (LAN) port Computer with wired (RJ-45) or wireless (802.11a/b/g/n or ac) adapter   Features: Ultimate Range & Wi-Fi Coverage Add long range Wi-Fi to your entire home or office with the  TITAN-AP. High Power amplifiers, low noise amplifiers and high gain antennas provide the ultimate Wi-Fi experience with a signal that easily penetrates walls and eliminates Wi-Fi dead spots.   14 Powerful Amplifiers & 4 Antennas The  TITAN-AP  is packed with the latest high power technology. With a total of 14 advanced amplifiers (3 x 2.4GHz amplifiers, 3 x 5GHz amplifiers, 4 x 2.4GHz signal reception amplifiers, 4 x 5GHz signal reception amplifiers) and 4 high gain 5dBi antennas, it delivers up to 800mW of output power. Providing the ultimate Wi-Fi performance and coverage, it is a leader in its class.   Stable Connections with 4 Antenna-Rx Technology The  TITAN-AP  features a unique combination of 3 transmitters with 4 receivers and 4 antennas per frequency to blanket a home or office with multiple Wi-Fi streams for unparalleled reliability, performance, and range.   Unmatched AC1900 Wi-Fi for Flawless HD & 4K Streaming Move faster than ever with unprecedented Wi-Fi speeds of up to 1900Mbps, that's 600Mbps on the 2.4GHz frequency and 1300Mbps on the 5GHz. Seamlessly stream HD and 4K content to multiple devices at once and eliminate gaming lag.   More Bandwidth for More Devices The  TITAN-AP  combines AC1900 Wi-Fi speeds with Amped Wireless' High Power Technology to provide multiple room, blazing-fast Wi-Fi coverage. The increased bandwidth of AC1900 and 4 Antenna-Rx Technology means your entire family can stream whatever they want, whenever they want, with no lag, all at the same time.   Parental Security Features & Guest Networks You're in control! Smart security features allow you to set the exact days and times that the networks are available, control the strength of your signal, and even block specific devices from accessing the network at all. Create up to 8 additional Wi-Fi networks for guests or conference rooms and enjoy secure connections with WPS push button configuration.   4 Gigabit Wired Ports Connect wired PCs, servers, printers, or A/V device, such as smart TVs, Blu-ray™ players, or gaming consoles at gigabit speeds with the four built-in wired network ports.   High Power Dual-Core Internet Processor Do more now with a powerful 1GHz Dual-Core Processor that is built to handle heavy traffic with ease, for the best networking experience.   Share Files Faster with USB 3.0 Includes two USB ports, one USB 3.0 and one USB 2.0. These ports are designed for attaching USB storage devices, such as an external hard drive or flash drive, to share at home or in the office with other networked computers.   Universal Compatibility The Access Point works with all brands and standards of single (2.4GHz) or dual band (2.4GHz/5GHz) wireless routers, powerlines or network switches.   Simple Plug & Play Setup Configuring the Access Point is easy. You simply plug the TITAN-AP into your router or network switch and the Access Point will automatically configure itself to your network. That's all it takes to get your High Power Wi-Fi Network up and running.