Usb rs232 ttl cable

You can easily connect your cellular phone / PDA / digital camera / modem / ISDN terminal adapter to your computer through an available USB 2.0 port. Setup is easy. Just plug your device in the adapter, connect it into your PC or Mac, and it’s ready to work. The cable adapter supports USB full speed communication and baud rates can be modified to desired setup. It supports automatic handshake mode, and is bus-powered.

You can easily connect your cellular phone / PDA / digital camera / modem / ISDN terminal adapter to your computer through an available USB 2.0 port. Setup is easy. Just plug your device in the adapter, connect it into your PC or Mac, and it’s ready to work. The cable adapter supports USB full speed communication and baud rates can be modified to desired setup. It supports automatic handshake mode, and is bus-powered.

This module can be used as a standard serial port with Laptops that don't have a standard serial port. This module creates a virtual COM port using USB on your computer which can support various standard Baud Rates (300 bps to 1 Mbps) for serial communication. This module includes the TX (transmit) and RX (receive) data signals.

Cable Length:80cm Color:As the picture show Size:6.7 x 3.5 x 1.5cm USB specification 2.0 compliant. Support Rs232 serial interface DB9. Support over1 Mbps data transfer rate. SupportWindows 98/2000/XP/8/10 and Mac OS9.0/OSX/Linux Support remote wake-up and power management. Suitable for PDA and Modem. Available for USB port. Low power consumption Product Weight:60g/pcs

Description: Details iShopping.pk brings you the best price for InFocus USB 3.0 with PTZ Camera (INA-PTZ-3) with express shipping all over Pakistan.   PTZ Camera with HD Clarity, Connectivity and Control Add the InFocus RealCam pan/tilt/zoom (PTZ) professional-quality HD camera to any computer, including a Mondopad, to make your video meetings or events shine. The RealCam features a full HD wide-angle video camera with USB 3.0 and HDMI connectivity at low bandwidth.   Features: • True high definition 1080p resolution • Pan, tilt and zoom using the included remote control • Integrated 72.5-degree wide-angle lens • Connect to any computer via USB 3.0 or HDMI without a separate capture device • Stream video over your network via the RJ45/LAN port • Integrate with room control systems with RS232 and RS485 ports • Use seamlessly with any software running on any OS, including Skype for Business, Adobe Connect, GoToMeeting and more • Pan angle of -170 to +170 degrees • Tilt angle of -30 to +90 degrees • Power adapter required (not supplied) outside North America   Specifications: Technical Information HD Recording Yes Display & Graphics Image Sensor Type CMOS Color Supported Color Effective Camera Resolution 2.1 Megapixel Video Video Formats H.264 H.265 Motion JPEG Maximum Video Resolution 1920 x 1080 Lens Minimum Focal Length 3.50 mm Maximum Focal length 42.30 mm Optical Zoom 12x Network & Communication Connectivity Technology Cable Remote Management Yes Interfaces/Ports HDMI Yes Network (RJ-45) Yes                                                Physical Characteristics Form Factor Shelf Mount Wall Mount Weight (Approximate) 3 lb

Compatible Device: Supports console device such as Cisco, TP-Link,Ubiquiti, Linksys,Huawei, HP ProCurve,and more; Compatible System: Windows, Mac OS, Linux, No needed driver for Windows 10/8, Mac OS.

Features: Products come with self-intellectual property; Comfortable operation; Press key comes with up to 3 millions times pressing life; Adopts CCD technology and advance intelligent Image recognition system, can recognize all main 1D code of the market; Adopt advance 2.4HZ transfer profile; Adopts red light LED exposure support system, can recognize code promptly even under dark environment. Can fast recognize 1D barcode from screen of computers or mobile phones. Sepcifications: Light type: Red LED, wave length: 625mm Scanning type: 1D image recognition technique; Technique type: CCD image technique Scanning speed: 300 times/sec Recognize accuracy: =5mil Scanning angle: Rotation 360°,Gradien+/-55°,Deviation:+/-55° Symbol contrast: =30% reflection difference Visual angle: Horizontal:36°,Vertial:23° Decoding ability: Code128,EAN-13,EAN-8,Code39,UPC-A,UPC-E,Codabar,Interleaved 2 of 5,ISBN/ISSN, ode 93,UCC/EAN-128,GS1 Databar etc Interface: USB, RS232, PS2 etc Prompt mode: Buzzer, indicator light Scanning type: Manual Physical Parameter: Size: 160mm×70mm×90mm Weight: 271.3g Material : ABS+PC Cable: 1.8m Shock resistance: Pass 1.5M dropping test Environment parameter: Working temperature: -10℃-50℃ Storage temperature: -20℃-60℃ Humidity: Relative humidity 5%-95%(no condensation) Brightness: Max.4,500 Lux(CFL) Electronic parameters: Voltage: 5V Current: 270mA(working);94mA(stand by) EMC: FCC Class A, CISPR Class A Electrostatic protection: 15KV

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 128V Audio DSP Mixer with express shipping all over Pakistan.   The CONVERGE Pro 2 128V Audio DSP Mixer from ClearOne is a complete conferencing solution with 12 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in VoIP interface for 2 lines. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection. The mixer comes with built-in VoIP for VoIP conferencing. The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.   Features: Architecture • 12 mic/line inputs with AEC •  Built-in VoIP for 2 lines •  Built-in USB for PC-based conferencing Scalable Connectivity •  Standalone and daisy-chained system •  Stack up units up to 96 mic/line inputs •  Expansion bus C-Link with 64 channels •  P-Link bus to connect 6 peripherals Configuration & Management •  CONSOLE software •  Auto-discovery of devices •  Matrix View for entire system •  FlowView for visualized audio signal paths •  System monitoring and troubleshooting Audio Signal Processing •  Acoustic Echo Cancellation processing •  Distributed Echo Cancellation on every mic input •  Noise cancellation with Adaptive-Ambience •  Acoustic Intelligence with faster convergence •  DARE feedback elimination •  Microphone gating Flexible Control Options •  Dialer app for Windows, Mac, iOS, and Android •  Tabletop controller with a touch panel •  Wall controller with buttons •  Web-based controller Supports 3rd-party control modules   Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) VoIP Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation Audio: 5 lines (2 default + 3 lines through license), each line supporting 1+5 calls Sample Rate: 24 kHz Sample Bit Depth: 24-bit Codec: G.711 uLaw, G.711 ALaw, G.722 Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: Proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 48T Audio DSP Mixer with express shipping all over Pakistan.     The CONVERGE Pro 2 48T Audio DSP Mixer from ClearOne is a complete conferencing solution with 4 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in Telco interface for teleconferencing. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection.   The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.     Features: Architecture • 4 mic/line inputs with AEC •  Built-in Telco with ClearEffect processing •  Built-in USB for PC-based conferencing Scalable Connectivity •  Standalone and daisy-chained system •  Stack up units up to 96 mic/line inputs •  Expansion bus C-Link with 64 channels •  P-Link bus to connect 6 peripherals Configuration & Management •  CONSOLE software •  Auto-discovery of devices •  Matrix View for entire system •  FlowView for visualized audio signal paths •  System monitoring and troubleshooting Audio Signal Processing •  Acoustic Echo Cancellation processing •  Distributed Echo Cancellation on every mic input •  Noise cancellation with Adaptive-Ambience •  Acoustic Intelligence with faster convergence •  DARE feedback elimination •  Microphone gating Flexible Control Options •  Dialer app for Windows, Mac, iOS, and Android •  Tabletop controller with a touch panel •  Wall controller with buttons •  Web-based controller •  Supports 3rd-party control modules     Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Amplifier Output Speaker Output Port: Dual binding posts Audio: 2 x Channel Output Power: Maximum 10 W, 8 Ohms load Frequency Response: 20 Hz to 22 kHz @ +10 dBu, +/- 0.5 dBu THD + N: 20 Hz to 22 kHz @ +10 dBu, 1 W, Dynamic Range: 20 Hz to 22 kHz @ 20 dB, >102dB, with 20 kHz digital low pass filter Crosstalk: Channel to Channel, stimulus at 20 dBu, 10 W output to receptor 8⿦ load, 20 Hz to 22 kHz, Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 128T Audio DSP Mixer with express shipping all over Pakistan.   The CONVERGE Pro 2 128T Audio DSP Mixer from ClearOne is a complete conferencing solution with 12 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in Telco interface for teleconferencing. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection. The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.   Features: Architecture 12 mic/line inputs with AEC Built-in Telco with ClearEffect processing Built-in USB for PC-based conferencing Scalable Connectivity Standalone and daisy-chained system Stack up units up to 96 mic/line inputs Expansion bus C-Link with 64 channels P-Link bus to connect 6 peripherals Configuration & Management CONSOLE software Auto-discovery of devices Matrix View for entire system FlowView for visualized audio signal paths System monitoring and troubleshooting Audio Signal Processing Acoustic Echo Cancellation processing Distributed Echo Cancellation on every mic input Noise cancellation with Adaptive-Ambience Acoustic Intelligence with faster convergence DARE feedback elimination Microphone gating Flexible Control Options Dialer app for Windows, Mac, iOS, and Android Tabletop controller with a touch panel Wall controller with buttons Web-based controller Supports 3rd-party control modules   Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: Proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

TX628 is an innovative biometric fingerprint reader for Time & Attendance applications, offering unparalleled performance using an advanced algorithm for reliability, precision and excellent matching speed. The TX628 features the fastest commercial-based fingerprint matching algorithm and ZK high-performance, high-image quality optical fingerprint sensor. The 3 inch TFT can display more information vividly, including fingerprint image quality and verification result etc. TCP/IP communication is standard and make sure the data transmission between terminal and PC can be easily done within several seconds. Features Color TFT screen with GUI Interface for ease of use ZK Optical Sensor 1 touch a-second user recognition Stores 3,200 templates and 80,000 transactions Optional integrated proximity or smart card reader Built-in Serial and Ethernet ports Built-in USB port optional, allows for manual data transfer when network isn't available Built in bell scheduling Real-time 1-touch data export 3rd party hosted & non-hosted applications Audio-Visual indications for acceptance and rejection of valid/invalid fingers SDK available for OEM customers and software developers Specifications : Fingerprint Capacity: 3200 templates Transaction Capacity:80,000 Sensor: ZK Optical Sensor Algorithm Version: ZK Finger v10.0 Communication: RS232/485, TCP/IP,USB-host,USB-client Optional Functions:Webserver,Printer,9 digit user ID Display: 3 inches TFT Screen Power Supply: 5V DC 2A Operating Temperature: 0 °C- 45 °C Operating Humidity:20%-80% Dimension: 180*135*37 mm Gross Weight:0.90 kg Package List: 1 x Fingerprint time attendance 1 x Installation screws kit 1 x 100~240V US plug power adapter (140cm) 1 x Software CD 1 x Chinese manual 1 x USB cable (140cm) 1 x Network cable (40cm)

HDMI to VGA Convertor (male to female) connects an HDMI compatible device to a monitor or projector with VGA port; Supports resolutions up to 1920x1080 (1080p Full HD) including 720p and 1600x1200 for HDTV monitors or projectors; Gold-plated HDMI connectors, wear and corrosion resistance to ensure a long lifespan and stable signal transmission performance Plug-and-play design makes it really easy to connect your devices. (It's not a usb to vga adapter) The HDMI to VGA converter is compatible with laptop, TVBOX, or other devices with HDMI port. VGA female port can be connected to projectors, HDTV, monitors/Displayer and other device with VGA male port. Please note: this product is not compatible with Apple System Devices. Support HD resolution, super clear picture, fast transmission speed The maximum signal range up to 1920 X 1200, 1080p; Video input signal: 5Volts p-p(TTL); Support VGA video bandwidth: 10 bit, 162MHz Video amplifier bandwidth: 162MHz Support resolution up to 1920 X 1200, reduce blank signal during transmit. Newly standby function, environmental friendly and energy saving. Lower energy consumption, heat-reduced, extend the life of the product. Stable performance, hard to skip the screen Input: HDMI Male Output: VGA Female; A VGA cable (sold separately) is required Supported Resolutions: 480i/480p/576i/576p/800x600/720i/ 720p/ 1280x1024/1600x1200/1080i/1080p HDCP Support: No Audio Support: No Color:Black/White Installation: Plug and Play

Material ABS plastic Brand Zkteco Model TX628 Color Grey blue + black Quantity 1 Remote Controlled distance N/A Voice Decibels N/A Power Supply 5V 2A Battery Type N/A Certification CE Other Fingerprint capacity: 3200 templates; Transaction Capacity: 80,000; Algorithm Version: ZK Finger; Communication: RS232/485, TCP/IP, USB-host, USB-client; Built-in bell scheduling; Other functions: T9 input, 9 digit, etc; Display: 3 inches TFT Screen; Power Supply: 5V DC; Operating Temperature: 0'C~45'C; Operating Humidity: 20%~80%; Languages: English / Simplified Chinese; Optional Functions: Support ID / MF card (extra charges needed) Packing List 1 x Fingerprint time attendance 1 x Installation screws kit 1 x 100~240V US plug power adapter (140cm) 1 x Software CD 1 x Chinese manual 1 x USB cable (140cm) 1 x Network cable (40cm) Dimensions: 7.09 in x 5.31 in x 1.46 in (18.0 cm x 13.5 cm x 3.7 cm) Weight: 15.10 oz (428 g)

Brand Zkteco Model TX628 Color Grey blue + black Quantity 1 Remote Controlled distance N/A Voice Decibels N/A Power Supply 5V 2A Battery Type N/A Certification CE Other Fingerprint capacity: 3200 templates; Transaction Capacity: 80,000; Algorithm Version: ZK Finger; Communication: RS232/485, TCP/IP, USB-host, USB-client; Built-in bell scheduling; Other functions: T9 input, 9 digit, etc; Display: 3 inches TFT Screen; Power Supply: 5V DC; Operating Temperature: 0'C~45'C; Operating Humidity: 20%~80%; Languages: English / Simplified Chinese; Optional Functions: Support ID / MF card (extra charges needed) Packing List 1 x Fingerprint time attendance 1 x Installation screws kit 1 x 100~240V US plug power adapter (140cm) 1 x Software CD 1 x Chinese manual 1 x USB cable (140cm) 1 x Network cable (40cm)

Material ABS plastic Brand Zkteco Model TX628 Color Grey blue + black Quantity 1 Other Fingerprint capacity: 3200 templates; Transaction Capacity: 80,000; Algorithm Version: ZK Finger; Communication: RS232/485, TCP/IP, USB-host, USB-client; Built-in bell scheduling; Other functions: T9 input, 9 digit, etc; Display: 3 inches TFT Screen; Power Supply: 5V DC; Operating Temperature: 0'C~45'C; Operating Humidity: 20%~80%; Languages: English / Simplified Chinese; Optional Functions: Support ID / MF card (extra charges needed) Packing List 1 x Fingerprint time attendance 1 x Installation screws kit 1 x 100~240V US plug power adapter (140cm) 1 x Software CD 1 x Chinese manual 1 x USB cable (140cm) 1 x Network cable (40cm) Dimensions: 7.09 in x 5.31 in x 1.46 in (18.0 cm x 13.5 cm x 3.7 cm) Weight: 15.10 oz (428 g)