Transmitter

Type: wireless HD video transmitter, wireless HDMI transmitter, wireless SDI transmitter, NLOS COFDM transmitter, microwave transmitter Other name: COFDM transmitter, wireless AV sender, COFDM wireless video transmitter Modulation: COFDM Special features: point to point, point to multi point, NLOS, LOS, mobile wireless transmission (non line of sight, line of sight) High definition: 1080I, 1080P 1920X1080; full HD Port: HDMI, SDI Frequency: VHF, UHF, 300MHz to 800MHz, 800MHz to 4400MHz, or 1.2GHz, 2.4GHz (customized) Distance: 3km to 5km NLOS (vehicle to building); 100km to 200km on UAV Function: transmitting audio video Work with: HD camera, UAV, COFDM receiver Encryption: AES 128 bit encrypted; AES 256 bit encrypted Details of Broadcasting wireless HD video transmitter Broadcasting wireless HD video transmitter, a new FHD HDMI SDI H.264 video transmitter, is to send FHD video Low latency high sensitive transmitter can connect to HDMI HD-SDI CCTV camera to transmit receive FHD 1080P, 1080I video high sensitive transmitter is popular among military, inspection section, police, army, fireman to install in station, building or helicopter, UAV ( unmanned aerial vehicle ) to live broadcast data (audio, video, images) Full HD 1080P high definition COFDM modulation Stable signal, 5KM -150km long range HD-SDI/HDMI and BNC input Adjustable bandwidth 4/8MHz Optional video input: HD-SDI and HDMI Balanced stereo audio input Two design Adjustable RF power Real time broadcasting Low delay Advantages: High quality image and high definition video transmission High speed mobile transmission, max speed 450kph Adjustable RF power ( 2-8W ), up to 200km transmission distance Broad-spectrum: in UAV shooting, live broadcasting COFDM modulation and stable transmission COFDM modulation AES data encryption Strong ability of anti-interference, diffraction and penetration

Backpack COFDM intercom transmitter radio video two way audio Product Description 2 way audio COFDM video intercom transmitter for NLOS long range wireless (SG-VT10) is a broadcast cofdm wireless video transmitter. NLOS wireless transmitter transmit good resolution image, acts as video walkie-talkie system, adopts COFDM modulation. COFDM wireless audio video transmitter has well safety, and this wireless video transmitter is encrypted with AES128 bit, AES 256 bit. Long range wireless cofdm transmitter has conventional modulation techniques, and it overcomes the reflection and coverage. COFDM wirelesss video transmitter has better anti-jamming capacity than transmission multipath simulation technique. 2 way audio COFDM video intercom transmitter for NLOS long range wireless is suitable for army training, fire rescue, marine remote control security application for its nearly live transmission high-speed mobile images and high quality image in NLOS or complicated working conditions Main Advantages: portable wireless 5000m COFDM modulation (stable transmission) two way audio LOS & NLOS video transmitter Low delay Dual aerials connectors two cooling fans Super long range transmission Parameters Item name Portable wireless 5000m COFDM video transmitter for 2 way audio Model No. SG-VT10 Power Supply DC11-14.5V/2.7A (aviation plug) Modulation COFDM 2K QPSK RF Bandwidth 2/2.5/4/8MHz(adjustable) FEC 1/2 2/3 3/4 7/8 (optional) Guard Interval 1/32 1/16 1/8 1/4(optional) Data Encryption AES 128/256 Bits/td Max speed 450km/h Video Input BNC/RCA Audio Input standard Aviation plug, support two-way intercome Video Compression Format H.264 Video Resolution standard 720P ,1280*720 RF Interface N (two aerial connectors) Work Environment/td -40℃~70℃ Transmission Distance Appr. 5km NLOS (for manpack) Case Material Aluminum; black Size 200*130*60mm Weight 2.5kg Delivery 1-3 working days delivery time

Details Drone transmitter COFDM 100km-200km microwave video sender (sg-s20) is a new long range wireless aerial transmitter. COFDM wireless transmitter is with the latest technologies of COFDM, MPEG-4 image compression and DVD quality video. Audio video wireless transmitter has a good NLOS (Non line-of -sight) wireless long range transmission, compact size, good heat resistance, and strong power amplifier for longer-range transmission. Long range wireless aerial transmitter can add HDMI or SDI interface as a HD COFDM wireless video transmitter, or add data port as COFDM data video transmitter, or Ethernet port as aerial transmitter. Drone transmitter COFDM 100km-200km microwave video sender is encrypted with AES128/256bits, this machines performs well in fast-moving wireless transmission. 720P or full HD 1080P high definition COFDM modulation Stable signal BNC or HD-SDI/HDMI input Adjustable bandwidth 4/8MHz Range 100km to 200km on UAV, 5km -10km NLOS Balanced stereo audio input Adjustable RF power Real time broadcasting Low delay built-in two cooling fans Model No. COFDM AF Modulation CODFM Frequency 300MHz to 4400MHz, (1.2GHz to 2.4GHz, 2.5GHz to 4.4GHz) Transmission audio, video, image, signal, LOS (line of sight), NLOS(non line of sight), point to point (P2P) point to multi-point(P2MP), mobile Range 5km to 10km for manpack/using in city,100km- 200km on UAV/Drone Features COFDM modulation, AES 128/256bit, digital, vhf, uhf, long range Video Compression MPEG-4/H.264 A/V interface RCA/BNC (Customized HDMI/SDI for HD) RF power output 15W Resolution 1280*720(720P), Customized 1920*1080 (HD 1080P) Use Manpack, UAV, car-borne, airborne, base station, control centre DC input DC12V-DC14V Working Current ≤4.7A@DC12V Constellation QPSK,16QAM (optional) FEC 1/2,2/3,3/4,5/6,7/8 (optional) Carrier 2K Guard Interval 1/32,1/16,1/8,1/4 (optional) RF interface N type Flatness ≤2dB(within full frequency range), ≤0.5dB(within 8MHz) Video Harmonic 1Vp-p @ 75Ω, NTSC/PAL adaptive CBER 2.0E-4 Casing Protection IP66 (dustproof, rainproof) Work environment -30~70 degree centigrade Dimension 220*140*60MM Weight 2.3kg Delivery 1-3 working days delivery time Free warranty 12 months for device; 3 months for parts

Type: HD COFDM transmitter, UAV COFDM transmitter Other name: COFDM transmitter, wireless video sender Modulation： COFDM Special Features: point to point, point to multi point, NLOS, LOS, mobile wireless transmission High definition: 1080I, 1080P 1920X1080; full HD Port: HDMI, SDI Frequency: VHF, UHF, 300MHz to 800MHz, 800MHz to 4400MHz, or 1.2GHz, 2.4GHz... Distance: 1km, 2km, 3km (vehicle to building); 10km to 40km on UAV Function: transmitting audio video Encryption: AES 128 bit encrypted; AES 256 bit encrypted Details of UAV COFDM transmitter 1080P COFDM wireless HDMI or HD SDI video UAV COFDM transmitter is a mini 1080i full HD video transmitter. COFDM Wireless HDMI or HD SDI video transmitter is with the core of mobile communication technology COFDM (multi-carrier modulation technique), which can transmit high quality and stable full-HD digital video signal in high speed mobile condition and heavy building blocks. COFDM HD video transmitter is with H.264 encoding format and HDMI or SDI video connector, stereo balance audio input and narrowband.

40km on Drone portable NLOS 1km wireless video transmitter COFDM wireless video transmitter uses ,AES encryption, COFDM modulation. Audio video encrpted uav transmitter supports both LOS(Line-of sight) and NLOS(Non Line-of sight) transmission. Key word encrypted uav transmitter can transmit 1km to 1km to 1.5km video through buildings, 20km to 40km long range video on UAV. Encrypted uav transmitter can live broacast video, images to the rear command post. Confidential audio video key word encrypted UAV transmitter is used in UAV surveillance, public security organs, procuratorate, court and security bureau. Video Sender Details 40km on Drone portable NLOS 1km wireless video transmitter Lightweight： 600g net weight only Small size： just as cute as 3.5" Tablet PC Distance: 1km to 40km LOS distance on air Aluminum-unibody housings: featured, good impact resistance and heat dissipation Special design for long range UAV uses Parameters Frequency: 300-900MHz(option),1.2G/2.4G/4.4GHz(customized) Modulation: COFDM,2K,QPSK DC Input: DC11-13V Working Current: 1.5A RF Power Output: 2-3Watt Constellation: QPSK,16QAM FEC: 1/2,2/3,3/4,5/6,7/8 Guard Interval: 1/32,1/16,1/8,1/4 Bandwidth: 2/2.5/4/8M(optional) A/V Interface: BNC or Aviation plug (optional) Encryption: AES 128/256 bits Flatness: less-than or equal 2dB(within full frequency range); less-than or equal 0.5dB (within 8MHz) Carrier: 2K,8K SHG :52dBc Video Signal: 1Vp-p@75Ω,NTSC/PAL adaptive CBER: 2.0E-4 Video Compression: MPEG-2 4:2:0 /MPEG-4 (optional) Resolution: 1280*720P Video rate: 15Mbps MAX (automatically) Audio Input: Stereo Left/Right audio channel; RF Interface: SMA / F (type) Video Format: PAL/NTSC(self-adaption) OperatingTemperature: -25 degree Celsius~55 degree Celsius Storage Temperature: -40 degree Celsius~70 degree Celsius Distance: 1-40km (LOS/NOLS) distance(on air) ; 1.5km NLOS distance(on ground station) Size: 14*8*2.8cm Weight: 0.6kg

UAV COFDM wireless transmitter for long range audio video in NLOS & LOS UAV COFDM wireless transmitter transmits over 100km LOS and 1km to 3km nlos long range audio, video and images. COFDM wireless transmitter is with COFDM modulation, H.264 MPEG-4 video compression and AES encryption . HDMI or HD SDI Video input can be added, so that it can be made as a high definition (HD) UAV wireless video transmitter. Wireless video transmitter is used for long range audio, video transmission, live broadcast and drone video shooting / recording. Parameters Frequency: 138-4400MHz (optional) ,only 100MHz space for user RF output Power: 5-8Watt Voltage/current: DC12V/3A Modulation: COFDM,2K,QPSK Constellation: QPSK,16QAM Bandwidth: 2/2.5/6/7/8MHz(optional) Transfer rate: 2/4/6/8Mbps(optional) FEC: 1/2,2/3,3/4,5/6,7/8(optional) Guard Interval: 1/2,2/3,3/4,5/6,7/8(optional FEC: 1/32,1/16,1/8,1/4 Video Input: 1 line PAL/NTSC analog video Audio Input: Analog stereo left and right channels Video Compression: H.264/MEPG-4 Data encryption: AES/ ALLTECH Basic scrambling Flatness: ≤2dB(within full frequency range) , ≤0.5dB (within 8MHz Carrier: 2K,8K Video Signal: 1Vp-p@75Ω,NTSC/PAL adaptive Resolution: 720p RF Interface N(F) Video Format: PAL/NTSC AV Interface: BNC (HDMI/SDI can be customized) Work environment: -30~70 degrees centigrade Distance: 3km max NLOS(manpack) 100km max LOS (on helicopter) Size: 200*130*60mm Weight:1.5kg

DESCRIPTION The Wireless 2 in 1 B6 Audio Receiver and Transmitter is basically a Bluetooth enabled device that sends and receive the Bluetooth audio signals easily and freely. With the help of this device, all the users can easily cast the music from the smartphones and PC to the audio equipment. In the same way, all the users can also send the audio signals from the MP3 Player, CD player or TV to the Bluetooth enabled speakers. The best thing about the Wireless 2 in 1 B6 Audio Receiver and Transmitter is that it also supports online movies, online games and real-time transmission data. The Wireless 2 in 1 B6 Audio Receiver and Transmitter has a total Bluetooth range up to 10 meters and it comes with the built-in 600mAh battery. The Wireless 2 in 1 B6 Audio Receiver and Transmitter takes up to 2 hours for a complete recharge and it gives the backup up to 8 Hours after one recharge. The Wireless 2 in 1 B6 Audio Receiver and Transmitter comes with the dedicated charging cable, so you don’t have to purchase it additionally from the market. DELIVERY ALL OVER PAKISTAN PIA Housing Society, Lahore, Punjab, Pakistan

Description: Details iShopping.pk brings you the best price for AKG PT420 Wireless Bodypack Transmitter with express shipping all over Pakistan.   The PT420 from AKG is a wireless bodypack transmitter used with the SR420 wireless receiver (sold separately) and has a frequency band of 614.100 - 629.900 MHz. The PT420 features a noiseless on/off/mute switch and a gain control for immediate volume adjustment. It comes with a AA size battery which lasts up to eight hours and has a low battery indicator to guarantee secure operation. This transmitter features a 3-pin mini XLR microphone connector and is compatible with all AKG MicroMics.   Specifications: Compatibility AKG MicroMics Frequency Band Band U2: 614.100 - 629.900 MHz Connector 3-pin mini XLR female, input Maximum Audio Level 12 dB Rated Impedance 1 Ohm Audio Bandwidth 40 Hz to 20 kHz (±3 dB) Signal to Noise Ratio 105 dB-A THD 0.8% @ at 1 kHz Transmitter Synchronization Manual Control 3-position switch, On / Off / Mute Gain control Battery Type AA battery (LR 6 AA alkaline battery or HR 6 AA (NiHM) rechargeable battery) Operating Time Up to 8 hours with one AA battery Dimensions 2.4 x 3.0 x 1.2" (6.0 x 7.6 x 3.0 cm) Weight 8 oz (214 g)  

Description: Details iShopping.pk brings you the best price for AKG Wireless Bodypack Transmitter (PT420) with express shipping all over Pakistan.   The PT420 from AKG is a wireless bodypack transmitter used with the SR420 wireless receiver (sold separately) and has a frequency band of 530.025 - 559.00 MHz. The PT420 features a noiseless on/off/mute switch and a gain control for immediate volume adjustment. It comes with a AA size battery which lasts up to eight hours and has a low battery indicator to guarantee secure operation. This transmitter features a 3-pin mini XLR microphone connector and is compatible with all AKG MicroMics.   Specifications: Compatibility AKG MicroMics Frequency Band Band A: 530.025 - 559.00 MHz Connector 3-pin mini XLR female, input Maximum Audio Level 12 dB Rated Impedance 1 Ohm Audio Bandwidth 40 Hz to 20 kHz (±3 dB) Signal to Noise Ratio 105 dB-A THD 0.8% @ at 1 kHz Transmitter Synchronization Manual Control 3-position switch, On / Off / Mute Gain control Battery Type AA battery (LR 6 AA alkaline battery or HR 6 AA (NiHM) rechargeable battery) Operating Time Up to 8 hours with one AA battery Dimensions 2.4 x 3.0 x 1.2" (6.0 x 7.6 x 3.0 cm) Weight 8 oz (214 g)

Description: Details iShopping.pk brings you the best price for Shure Gooseneck Base Transmitter (MXW8) with express shipping all over Pakistan.   The MXW8 Gooseneck Base Transmitter from Shure is a bi-directional base transmitter for optional gooseneck microphones and is compatible with Shure's Microflex wireless system. The unit has an earphone output that allows you to monitor return audio, useful for translations or programming material. It is capable of AES 256-bit encryption audio transmission to assure a secure signal. It is powered by a built-in rechargeable battery that can provide up to 8 hours of operation.   Features: • Wide frequency response: Full range audio for clear voice transmission •  Concealed power switch: Prevents accidental powering off •  Bi-directional wireless: Enables return channel audio and real time remote control of all wireless microphone settings including light ring indication •  Earphone output: Listen to audio from a return channel for translation, cueing, or program material •  Programmable mute button: Customize local or remote muting behavior per application, with options including push-to talk, push-to-mute, and external control •  Encrypted wireless: AES 256-bit encryption for secure wireless transmission •  Wide working range: Reliable wireless coverage extends up to 160 feet (50 meters) •  Out of range alert: Emits beeping sound when range limit is exceeded •  Wireless linking: Assign the microphone to an Access Point channel by simply docking it in a Networked Charging Station and pressing "link" •  Li-ion batteries: Smart lithium-ion internal batteries provide up to 9 hours of continuous use, charge to full in 2 hours, and enable remote monitoring over the network of remaining runtime and charge status in hours and minutes Standby mode: Enabled remotely during periods of inactivity to significantly extend battery life when not in use •  Low-battery LED: Visually alerts when there is 30 minutes of charge remaining •  USB charging: Connects to any standard USB power source for "always on" usage   Specifications: Gain Adjustment Range -25 to 15 dB (in 1 dB steps) Maximum Input Level −9 dBV (mic gain @ -16 dB) Headphone Output 1/8" (3.5 mm) dual mono (will drive stereo headphones) Output Power Headphone: 17.5 mW (1 kHz @ 1% distortion, peak power, @ 16 Ω) Antenna Type Internal, spacial diversity, linear polarization Battery Type Rechargeable Li-Ion Battery Life Up to 9 hours (Calculated with a new battery. Runtimes vary depending on battery health) Charge Connector USB 3.0 Type A Housing Molded plastic Temperature Range Recommended for Storage: 32 to 77°F (0 to 25°C) Connector 6-pin connector for Shure MX405/10/15 Configuration Unbalanced Input Impedance >20 kΩ (@ 1 kHz) Dimensions (HxWxD) 1.4 x 2.8 x 4.9" (36 x 71 x 124 mm) Weight 6.8 oz (193 g) with batteries, without microphone

Description: Details iShopping.pk brings you the best price for Shure Omnidirectional Boundary Transmitter (MXW6) with express shipping all over Pakistan.   The MXW6 Omnidirectional Boundary Transmitter from Shure is a bi-directional boundary transmitter with a built-in omnidirectional microphone designed for use with Shure's Microflex wireless conference system. The unit has an earphone output that allows you to monitor return audio, useful for translations or programming material. It has a concealed power switch for preventing accidental turn-off. It transmits your audio with AES 256-bit encryption for secure broadcasting. The MXW6's built-in rechargeable battery can provide up to 9 hours of operation.   Features: • Wide frequency response: Full-range audio for clear voice transmission • Bi-directional wireless: Enables return channel audio and real time remote control of all wireless microphone settings • Earphone output: Listen to audio from a return channel for translation, cueing, or program material • Concealed power switch: Prevents accidental powering off • Programmable mute button: Customize local or remote muting behavior per application, with options including push-to talk, push-to-mute, and external control • Encrypted wireless: AES 256-bit encryption for secure transmission • Wide working range: Reliable wireless coverage extends up to 160 feet (50 meters) • Out of range alert: Emits beeping sound when range limit is exceeded • Easy wireless linking: Assign the microphone to an Access Point channel by simply docking it in a Networked Charging Station and pressing "link" • Li-ion batteries: Smart lithium-ion internal batteries provide up to 9 hours of continuous use, charge to full in 2 hours, and enable remote monitoring over the network of remaining runtime and charge status in hours and minutes • Standby mode: Enabled remotely during periods of inactivity to significantly extend battery life when not in use • Low-battery LED: Visually alerts when there is 30 minutes of charge remaining • USB charging: Connects to any standard USB power source for "always on" usage   Specifications: Gain Adjustment Range -25 to 15 dB (in 1 dB steps) Maximum Input Level −9 dBV (mic gain @ -16 dB) Headphone Output 1/8" (3.5 mm) dual mono (will drive stereo headphones) Output Power Headphone: 17.5 mW (1 kHz @ 1% distortion, peak power, @ 16 Ω) Antenna Type Internal, spacial diversity, linear polarization Battery Type Rechargeable Li-Ion Battery Life Up to 9 hours (Calculated with a new battery. Runtimes vary depending on battery health) Charge Connector USB 3.0 Type A Housing Molded plastic Microphone Capsule R183B Temperature Range Recommended for Storage: 32 to 77°F (0 to 25°C) Dimensions (HxWxD) 0.9 x 1.75 x 4.5" (23 x 44 x 114 mm) Weight 3.8 oz (108 g) with batteries

Description: Details iShopping.pk brings you the best price for Shure Cardioid Boundary Transmitter (MXW6) with free shipping all over Pakistan.   The MXW6 Cardioid Boundary Transmitter from Shure is a bi-directional boundary transmitter with a built-in cardioid microphone designed for use with Shure's Microflex wireless conference system. The unit has an earphone output that allows you to monitor return audio, useful for translations or programming material. It has a concealed power switch for preventing accidental turn-off. It transmits your audio with AES 256-bit encryption for secure broadcasting. The MXW6's built-in rechargeable battery can provide up to 9 hours of operation.   Features: • Wide frequency response: Full-range audio for clear voice transmission • Bi-directional wireless: Enables return channel audio and real time remote control of all wireless microphone settings • Earphone output: Listen to audio from a return channel for translation, cueing, or program material • Concealed power switch: Prevents accidental powering off • Programmable mute button: Customize local or remote muting behavior per application, with options including push-to talk, push-to-mute, and external control • Encrypted wireless: AES 256-bit encryption for secure transmission • Wide working range: Reliable wireless coverage extends up to 160 feet (50 meters) • Out of range alert: Emits beeping sound when range limit is exceeded • Easy wireless linking: Assign the microphone to an Access Point channel by simply docking it in a Networked Charging Station and pressing "link" • Li-ion batteries: Smart lithium-ion internal batteries provide up to 9 hours of continuous use, charge to full in 2 hours, and enable remote monitoring over the network of remaining runtime and charge status in hours and minutes • Standby mode: Enabled remotely during periods of inactivity to significantly extend battery life when not in use • Low-battery LED: Visually alerts when there is 30 minutes of charge remaining • USB charging: Connects to any standard USB power source for "always on" usage   Specifications: Gain Adjustment Range -25 to 15 dB (in 1 dB steps) Maximum Input Level −9 dBV (mic gain @ -16 dB) Headphone Output 1/8" (3.5 mm) dual mono (will drive stereo headphones) Output Power Headphone: 17.5 mW (1 kHz @ 1% distortion, peak power, @ 16 Ω) Antenna Type Internal, spacial diversity, linear polarization Battery Type Rechargeable Li-Ion Battery Life Up to 9 hours (Calculated with a new battery. Runtimes vary depending on battery health) Charge Connector USB 3.0 Type A Housing Molded plastic Microphone Capsule R185B Temperature Range Recommended for Storage: 32 to 77°F (0 to 25°C) Dimensions (HxWxD) 0.9 x 1.75 x 4.5" (23 x 44 x 114 mm) Weight 3.8 oz (108 g) with batteries

HD video transmitter with COFDM for UAV Distance: NLOS 1km to 2km/LOS 40KM 1080i or 1080P HD Video transmitter HDM or HD-SDI video input (single selection) Full HD video Low delay, mini, live broadcast COFDM modulation Support composite standard video and balanced audio input Adjustable parameters

Name: wireless transmitter, wireless bridge, wireless transceiver, network transceiver, Ethernet transceiver, IP transceiver, data transceiver Type: audio video data transceiver, RF transceiver, digital AV transceiver, audio video wireless bridge Application: used in the UAV/UAS/Quadcopter/Octocopter/ hexacopter high-speed moving transmission in complex environments. Details: Data: RS232 RS422, RS485 Ethernet/IP/network: RJ45 HD interface:HDMI Frequency: 2.4GHz Distance: 1-10km Modulation: COFDM/TDD-COFDM Mode: TDD, full duplex, two way data Transmission: audio, video, data, two-way, P2P (point-to-point), p2mp (point to multipoint), LOS (line of sight), NLOS (non line of sight), mobile Features: 1. Military-grade digital zero delay(around 10ms) HDMI ethernet transceiver 2. TDD duplex mode 3. Excellent sensibility 4. High RF output power 5. Well safety performance 6. Point to point and point to multi-point transmission 7. Remote control 8. Good diffraction ability 9. Wide coverage 10. High transfer rate 11. Strong anti-interference and anti-fading ability 12. Transparent protocol 13. Confidentiality 14. Proprietary data scrambling encryption Model COFDM AW (Sold by set including transmitter and receiver) Power Supply DC7V-17V Consumption 9W Video in/out HDMI, RJ45 Ethernet, support 1080P, 720P, 576, 480 Note: HDMI for transmitting end, RJ45 for receiving end Data in/out Standard RS232/RS485/RS422 Frequency Output 2405MHz-2470MHz, step in 1MHz (other frequencies can be customized) RF power output 20dBm-30dBm (100mW-1000mW) (adjustable) Working bandwidth 4MHz/8MHz Encryption 128 bit AES, and user-defined password Error correction mechanism 32 bit of CRC、ARQ Modulation TDD-COFDM、time division duplex mode Parameter Control adjustable parameters through the OLED panel Working temperature -20℃-75℃ Dimension 85mm*28mm*51mm Weight 151g

Description: Details iShopping.pk brings you the best price for Denon Wireless Audio Transmitter (DN-202WT) with express shipping all over Pakistan.   he DN-202WT from Denon is a wireless audio transmitter with balanced XLR and 1/4" inputs, enabling users to send audio from a professional audio mixer or similar source through walls and ceilings up to 200 feet away. Designed for use in A/V applications where unsightly cable runs or drilling of holes is unideal, the DN-202WT offers a simple, straighforward wireless audio solution.   Features: • Works with the DN-­202WR companion receiver • Rugged metal enclosure • Built-­in eyelets for mounting screws   Specifications: Wireless Range 200' (60 m) Dimensions 1.8 x 6 x 6" (45 x 152 x 152 mm) Packaging Info Package Weight 1.5 lb Box Dimensions (LxWxH) 10.1 x 6.1 x 2.4"

Fast transmit video equipment security patrol system is of FHD 1080P for long range RF transmission. Security patrol system is with 15w to 25W RF power, HDMI or SDI port and VHF,UHF frequency. Patrol system is with mobile RF communication COFDM modulation, and it is a high-end RF transmitter Fast transmit video equipment security patrol system stably transmits images video through obstacles like buildings. Video equipment security patrol system is widely used security & surveillance, wireless RF transmission, live broadcasting...

60M VGA Signal to RJ45 Signal Extender Transmitter + Receiver Set Single Ethernet Cable.

HN-360T Technical Characteristics: Model HN-360T HDMI/SDI optional Voltage DC7.2V(lithium battery 7.2V/1400mA) Current 900mA Video input AV:3.5mm port,external SD analog video signals Camera:2.5mm port,external HD camera SDI/HDMI(option):Support HD1080P,720P,576,480,with audio de-embedding function Radio Frequency 300~860MHz ,Stepping1MHz (Other frequency can be customized) Bandwidth 2/2.5/4/8MHz Audio channel 2 channels Audio encoder ISO/IEC13818-3 （MPEG-1 ） Video encoding H.264(MPEG-2 option) RF interface SMA Output power 26dBm/400mw Encryption AES Modulation COFDM 2K Modulation mode QPSK 、QAM16 、QAM64 FEC 1/2,2/3,3/4,7/8 Guard Interval 1/32,1/16,1/8,1/4 Operating temperature -20～75 ℃ Parameter control mode Through OLED display panel to set the relevant parameters Dimensions 100mm*59mm*23mm Weight 188g (without battery)

Product Description: Bluetooth V4.1 + EDR, transmission distance is up to 10m. Support Bluetooth hands-free call. Sleep mode for energy saving. With mini-USB charger, long working time up to 8 hours. One button to control to play music or hands free phone call. Wireless music receiver connects to 3.5mm headphone jacks. Lower power consumption, compact, pocket-sized design, plug and play, easy to use. Use with home stereos/ speakers, car stereos, headphones etc. One connect button for easy device pairing. Highlights: Type: Bluetooth Music Receiver Color: Black Class: Class 2 Frequency: 2.4GHz Connector: 3.5mm Transmission Rate: 24 Mbps Compatible Brand: Universal Operation Time: Up to 8 hours Bluetooth Stereo Audio Profile: A2DP Power Supply: Chargers via Mini-USB Cable Features: Bluetooth Wireless, Mini and Handsfree, Car Bluetooth Music Receiver Size: 5.3cm x 2.5cm x 1.1cm/2.09? x 0.98? x 0.43? (Approx.)

Bluetooth Car Audio Music Receiver - BlackIf this is the first time you use this device, please pair the device first To enter pairing mode, press and hold the ON/ OFF button for 5 seconds until both red and blue LEDs flash. Search for the music receiver on your mobile phone or compatible transmitter. Touch and hold one button to power on and it will automatically search for a compatible transmitter. No any codes to enter if connect with for Apple or for Android device. LED lights beneath the button indicate the device's connection and charging status. The devices should now recognize each other and pair. The LED on the music receiver will slowly flash blue after successfully pairing. To complete pairing some devices require a pass key or code, please enter "0000". Once successfully paired, the devices can be power off. To re-connect simply power them both on,no need to pair again. Note: If you for wish to use the P music receiver with another transmitter, you must restart the pairing process with the new device from step one. After pairing the new transmitter, the old transmitter will no longer be paired to the music receiver, you can have only one device connected at a time. If you have already matched before Press and hold the ON/OFF button for 3 seconds until the blue LED light begins flashing. To turn off, press and hold the ON/ OFF button for 5 seconds. The red LED will light up, and then turn off. Note: Read the user guide of your transmitter or mobile phone to find out how to turn ON/ OFF Blutooth wirless technology.

Products Details: Improved Bluetooth glasses and invisible ear bud kit provided covert communication solution for all ear bud users in various applications including business negotiation, security protection, surveillance etc. Each set pack by easy carry bag including all equipment's you will need. Product Description: The Bluetooth glasses and spy invisible ear bud kit is an improved covert communication system. It includes all equipment's you will need in one easy carry bag. You can use improved Bluetooth glasses and spy ear bud kit on any mobile phones equipped Bluetooth. Bluetooth glasses transmitter is build-in sensible microphone, and invisible ear bud allows you to hear everything that your partner tells you. How does Bluetooth glasses and spy invisible ear bud kit works? I. Make sure load battery into ear bud and Bluetooth glasses has power. II. Put Bluetooth glasses in paring mode and connect to mobile phone. III. Wear ear bud into ear canal and make a call in mobile phone. earbud works That's all you need to work. Improved Bluetooth glasses transmitter Bluetooth glasses is an improved inductive transmitter designed for invisible ear bud users who want all covert communications and benefits of Bluetooth technology. The ultra compact design ensures no one will find this a transmitter for earpiece. Bluetooth glasses is universally compatible with all standard Bluetooth enabled equipment's including mobile phones, computers and cordless phone. Features include excellent reception and transmission of audio signal, has build in microphone, has a large capacity Lithium battery and has a one-year warranty. Invisible Spy earpiece headphone is a small inductive receiver which should wear into ear canal and can be drive by any kind of wireless inductive transmitters including ME 52 Bluetooth glasses. There is a tiny transparent thread allows safe removal after use. The invisible ear bud headphone is completely silent and automatically picked up signals from the transmission Bluetooth glasses. Bluetooth glasses and invisible ear bud is ideal for: Business meetings & negotiation Get the information from your partner in real time in secret. Security protection Communicate with your team secretly without revealing identity. Media & training appearances Reporters,actors, magicians, musicians have a script read to you, or get quick answers to crucial questions. Surveillance and detective Provide you with ultimate in listening covertness. How to play music on Bluetooth glass? Bluetooth hardware does not supports A2DP function which allows Bluetooth to play music. For Android smart phones can download "Super BT Mono Froyo Pro" to play music via Bluetooth glass. For iPhone iPod touch and iPad please use APP of "iBrr Bluetooth Receiver and Remote" to active music play function. Why buy Bluetooth glasses and invisible bud from Spy gadget We are exclusive wholesale distributor of spy devices Fast service and friendly communication. 7 days a week technical support. Secure payments by Paypal. Discounts available for bulk orders. The Bluetooth glasses and spy invisible ear bud kit consists of: 1 x ME52 Bluetooth glasses (Transmitter in left or right frame. Default is in left frame). 1 x Wireless ear bud ME02 1 x Button battery for wireless earbud 1 x Original package

Description: Details iShopping.pk brings you the best price for Shure Replacement Rechargeable Lithium-Ion Battery For Microflex Wireless with express shipping all over Pakistan.   Specifications: General Product Type Wireless transmitter battery Battery Technology Lithium ion Compatibility Information Designed for Shure MXW1, MXW1 Bodypack Transmitter, MXW6/C Boundary Transmitter, MXW6/O Boundary Transmitter, MXW8 Microflex Gooseneck Base Transmitter Packaging Info Package Weight 0.2 lb Box Dimensions (LxWxH) 4.8 x 3.4 x 2.4"

  General Specifications Bluetooth version:  4.1 Support:  A2DP V1.2, AVRCP V1.5 HFP V1.5, HSP V1.2 Transducer:  1 x 40mm Output power:  3.0W Frequency response:  180Hz – 20kHz Signal-to-noise ratio:  ≥80dB Battery type:  Lithium-ion polymer (3.7V, 730mAh) Battery charge time:  2.5 hours Music playing time up to:  5 hours (varies by volume level and audio content) Dimensions: (H x W x D)71.2 x 86.0 x 31.6 (mm) Weight: 184g Bluetooth transmitter power 0-4dBm Bluetooth transmitter frequency 2.402-2.480GHz Bluetooth transmitter modulation GFSK/DQPSK/8DPSK    

  General Specifications Premium 5.8mm Dynamic Driver  Yes Frequency response  10Hz–22kHz Battery type  Rechargeable Lithium Ion Cylindrical Cell (3.7V 2x60 mAh) Control and Connection Specifications Connection  Micro USB cable for charging Support  BT 4.0, A2DP v1.2, AVRCP v1.4, HFP v1.6, HSP v1.2 Bluetooth® transmitter frequency range  2.402 - 2.480GHz Bluetooth® transmitter power   Bluetooth® transmitter modulation  GFSK, π/4 DQPSK, 8DPSK    

Telecommunications working as information transfers is the trading of data over huge separations by electronic means. A complete, single information transfers circuit comprises of two stations, each outfitted with a transmitter and a beneficiary. The transmitter and beneficiary at any station might be consolidated into a solitary gadget called a handset. The medium of sign transmission can be electrical wire or link (otherwise called "copper"), optical fiber or electromagnetic fields. The free-space transmission and gathering of information by method for electromagnetic fields is called remote K: telecommunication services, telecommunication application

Description: Details iShopping.pk brings you the best price for Sennheiser Lavailer Clip-On Wireless Microphone Set (XSW 12-C) with express shipping all over Pakistan.   Make your presentations come to life! Compact bodypack system, with omnidirectional lavalier mic, offering excellent speech intelligibility. Transmitter features an illuminated mute button, 10 hours of operation, and 960 tunable frequencies. Unobtrusive ME2-2 lapel mic provides natural speech reproduction. All-metal, True Diversity receiver offers intuitive scan and sync functions that ensure trouble-free operation. Rugged, reliable and easy-to-use, XS Wireless delivers renowned Sennheiser sound to small venues, conference rooms or houses of worship.   Features: • Easy-to-use, all-in-one package for singers, speakers and presenters •  e 835 sound to cut through high on-stage levels •  High feedback rejection •  Mute button for full speech control •  Synchronization via RF remote channel •  Frequencies tunable in steps of 25 kHz •  24 MHz bandwidth •  8 frequency banks with each max 12 presets   Specification: Technical Data RF frequency range 821...832 MHz / 863...865 MHz  766...790 MHz  614...638 MHz  606...630 MHz  548...572 MHz  548...865 MHz Presets 12 THD, total harmonic distortion Signal-to-noise ratio > 103 dB(A) Transmission/receiving frequencies 960 (520 in range E) Switching bandwidth 24 MHz (13 MHz in range E) Receivers Dimensions 200 x 127 x 42 mm Weight ~ 730 g Antenna connector 2 BNC, 50 Ω Audio output level (balanced) XLR: +14 dBu max Audio output level (unbalanced) Jack: +8 dBu max Diversity reception True Diversity Transmitter Dimensions 96 x 66 x 24 mm Frequency response Mic: 100...16000 Hz  Line: 60...16000 Hz Weight ~ 95g RF Output Power typ. 10 mW Operating Time 10h Power Suppy 2x AA Batteries Input Voltage Range 0.5 Vrms Clip-on Microphone Microphone permanent polarized Sound pressure level (SPL) 142 dB Weight ~ 240 g Transducer Principle permanently polarized condenser microphone Pick-up pattern Omni directional AF sensitivity 5 mV/Pa

Description: Details iShopping.pk brings you the best price for Shure 4-Port Networked Charging Station (MXWNCS4) with express shipping all over Pakistan.   The  MXWNCS4 4-Port Networked Charging Station  from Shure is designed to provide networked charging for up to 4 Microflex wireless transmitter units. Thanks to its networking abilities, the MXWNCS4 can display charge time info to networked computers in addition to being able to assign channels to docked transmitters.   Features: • Station accepts all Microflex Wireless transmitters • Charge status indicators: 5-segment LEDs on the unit display charge status individually for every docked microphone • Remote charge status monitoring: Ethernet connection to the system enables remote monitoring of battery charge status in hours and minutes via the control software or third party control systems • Transmitter linking: Assign docked wireless microphones to channels on an Access Point Transceiver by simply pressing "link" • Rapid charge times: Reaches 50% charge in one hour and fully charges transmitters in two hours • Overcharge protection: Smart recharging circuitry safeguards against battery damage and extends life cycles   Specifications: Charge Time MXW1, MXW6, MXW8: 50% = 1 hour, 100% = 2 hours  MXW2: 50% = 1.5 hours, 100% = 3 hours Network Interface 10/100 Mbps Ethernet Power Requirement 15 V DC @ 3.3 A maximum, supplied by external power supply (tip positive) Housing Molded plastic, cast zinc Dimensions (HxWxD) 2.7 x 7.5 x 7.25" (68 x 191 x 184 mm) Weight 3.7 lb (1.7 kg)

Description: Details iShopping.pk brings you the best price for Shure Networked 2-Port Charging Station (MXWNCS2) with express shipping all over Pakistan.   The MXWNCS2 Networked 2-Port Charging Station from Shure is capable of charging MXW1 and MXW6 microphone transmitters (not compatible with MXW8 gooseneck microphones). It also links the microphones to access point channels and networks battery statistics to the control software.   Features: Charge Status Indicators 5-segment LEDs on the unit display charge status individually for every docked microphone transmitter Remote Charge Status Monitoring Ethernet connection to the system enables remote monitoring of battery charge status in hours and minutes via Microflex Wireless Control Software or third-party control systems Easy Transmitter Linking Assign docked wireless microphones to channels on an access point transceiver by simply pressing "Link Rapid Charge Times Reaches 50% charge in one hour and fully charges transmitters in two hours Overcharge Protection Smart recharging circuitry safeguards against battery damage and extends life cycles

Description: Details iShopping.pk brings you the best price for AKG CS 5 IRT 1 Small Mountable Infrared Conference Transmitter with express shipping all over Pakistan.   The CS 5 IRT 1 Small Mountable Infrared Conference Transmitter from AKG is a wireless, infrared radiator for the CS 5 Conference System that is capable of transmitting up to seven language translation channels to the CS 5 IRR 7 infrared receivers. The CS 5 IRT 1 is the smaller of the two radiator transmitters available for the CS 5 Conference System and it has a transmission coverage area of 6,450 square feet. Each CS 5 IRT 1 comes complete with a mounting bracket for installation on a wall or ceiling.   Features: • Daisychainable with other transmitters via coaxial cable   Specifications: Input/Output Connectors BNC/Coaxial Input Voltage 0-5 V / 50 ohms Output Voltage 0-5 V / 50 ohms Power Voltage 200-240V 50/60Hz, 1.5A or 100-120V 50/60Hz, 3.15A (internally selectable) Wavelength 870 nm Radiated Power 2.5 W Coverage Angle ±22 degrees (50% down) Coverage Area 6,450 sq.ft. / 600 m2 Dimensions (W x H x D) 10.3 x 6.3 x 3.0" (264 x 160 x 77 mm) Weight 5.6 lb (2.5 kg)

Description: Details iShopping.pk brings you the best price for AKG CS 5 IRT 2 Large Mountable Infrared Conference Transmitter with express shipping all over Pakistan.   The CS 5 IRT 2 Large Mountable Infrared Conference Transmitter from AKG is a wireless, infrared radiator for the CS 5 Conference System that is capable of transmitting up to seven language translation channels to the CS 5 IRR 7 infrared receivers. The CS 5 IRT 2 is the larger of the two radiator transmitters available for the CS 5 Conference System and it has a transmission coverage area of 10,750 square feet. Each CS 5 IRT 2 comes complete with a mounting bracket for installation on a wall or ceiling.   Features: • Daisychainable with other transmitters via coaxial cable   Specifications: Input/Output Connectors BNC/Coaxial Input Voltage 0-5 V / 50 ohms Output Voltage 0-5 V / 50 ohms Power Voltage 200-240V 50/60Hz, 1.5A or 100-120V 50/60Hz, 3.15A (internally selectable) Wavelength 870 nm Radiated Power 3.8 W Coverage Angle ±22 degrees (50% down) Coverage Area 10,750 sq.ft. / 1000 m2 Dimensions (W x H x D) 10.3 x 12.1 x 3.0" (264 x 307 x 77 mm) Weight 8.9 lb (4 kg)