Thermostats water

Professional Training of HVAC HEATING, VENTILATION,AIR CONDITIONING HVAC Course Heating, ventilation, and air conditioning (HVAC) is an indoor and vehicular environmental comforting technology. The technology aims to provide thermal comfort and high indoor air quality. The techniques of ventilating a building is further divided into a few types as mechanical, forced, and natural ventilation that will provide optimal temperature throughout the day and night. HVAC does the above function, through three different and integrated parts such as heating, ventilation, and air-conditioning at required points or wherever necessary. Installing, HVAC systems has become common in the recent days and also the required industry standard for construction of new buildings. Introduction to HVAC The need for HVAC References, standards and codes Terms, definitions and units HVAC system type overview Ventilation and air quality Buildings and energy efficiency Psychrometrics Properties of moist air Psychrometric chart Sensible and latent Combined processes Mixing of air streams Refrigeration Definitions Refrigerant selection Safety considerations Pressure and enthalpy Phase change concepts Vapor compression cycle System components Heating and Cooling Loads Loads and energy Heat transfer Weather data Infiltration and ventilation Cooling load calculations All Air Systems Definition of “all air systems” Types of all supply and return air systems Recirculating / Mixed Air Systems Dedicated Outside Air (DOAS) Systems Overhead / Dilution Type: Constant Volume (CAV) and Variable Volume (VAV) Displacement / UFAD Type Types of exhaust systems General – Toilet, etc. Laboratory, process, or other specialty systems Types of central equipment Packaged / Unitary systems Split systems Air handling units Fans Types of terminal equipment Air Terminal Units / VAV Boxes Grilles, Registers, & Diffusers System Comparison – Advantages / Disadvantages Hybrid approaches Applications / Examples Hydronic Systems Definition of “hydronics” Comparison to air systems Types of hydronic systems Heating Hot Water Chilled Water Condenser Water: Tower and Geo-exchange Glycol Water Types of central equipment Boilers Chillers Cooling Towers / Fluid Coolers Pumps Heat Exchangers Types of terminal equipment Coils Unit Heaters Fan Coil Units Chilled Beams Radiant System Comparison – Advantages / Disadvantages Steam and Steam Condensate Definition of “steam” Comparison to air and hydronic systems ASME Codes / Safety Types of steam and condensate systems Low Pressure High Pressure Condensate Collection: Gravity return, Pumped return, Vacuum Types of central equipment Boilers Heat Exchangers Make-up water systems Types of terminal equipment Coils Humidifiers Unit Heaters Fan Coil Units Radiant System Comparison - Advantages / Disadvantages Applications / Examples Field Tour - Wisconsin Energy Institute Controls: Building Automation Systems Definition / Purpose of “Building Automation System (BAS)” Types of HVAC control systems Local Centralized (Building-wide) Pneumatic Direct Digital Control Pneumatic-Hybrid Programmable Logic Control (PLC) Type of control equipment Valves Dampers Actuators Sensors and thermostats Types of Controls Proportional/Modulating Control Concepts Open/Closed Loop Control Wisconsin Energy Institute Sequence of Operations Mechanical Flow Diagrams INSTITUTE OF PROFESSIONAL AND TECHNICAL STUDIES (IPATS) Whatsapp: +92 3219606785, 03035530865 Call: +923315145601, 03495021336 Head Office: 2nd Floor, Yasir Plaza, Near Chatri Chowk, Khanna Pull, Qadeer Road, Rawalpindi, Pakistan Contact Office: +923219606785, 03035530865, 0331-5145601, 0349-5021336 Email: ipatsedu@gmail.com Website: www.ipatsedu.comProfessional Training of HVAC HEATING, VENTILATION,AIR CONDITIONING HVAC Course Heating, ventilation, and air conditioning (HVAC) is an indoor and vehicular environmental comforting technology. The technology aims to provide thermal comfort and high indoor air quality. The techniques of ventilating a building is further divided into a few types as mechanical, forced, and natural ventilation that will provide optimal temperature throughout the day and night. HVAC does the above function, through three different and integrated parts such as heating, ventilation, and air-conditioning at required points or wherever necessary. Installing, HVAC systems has become common in the recent days and also the required industry standard for construction of new buildings. Introduction to HVAC The need for HVAC References, standards and codes Terms, definitions and units HVAC system type overview Ventilation and air quality Buildings and energy efficiency Psychrometrics Properties of moist air Psychrometric chart Sensible and latent Combined processes Mixing of air streams Refrigeration Definitions Refrigerant selection Safety considerations Pressure and enthalpy Phase change concepts Vapor compression cycle System components Heating and Cooling Loads Loads and energy Heat transfer Weather data Infiltration and ventilation Cooling load calculations All Air Systems Definition of “all air systems” Types of all supply and return air systems Recirculating / Mixed Air Systems Dedicated Outside Air (DOAS) Systems Overhead / Dilution Type: Constant Volume (CAV) and Variable Volume (VAV) Displacement / UFAD Type Types of exhaust systems General – Toilet, etc. Laboratory, process, or other specialty systems Types of central equipment Packaged / Unitary systems Split systems Air handling units Fans Types of terminal equipment Air Terminal Units / VAV Boxes Grilles, Registers, & Diffusers System Comparison – Advantages / Disadvantages Hybrid approaches Applications / Examples Hydronic Systems Definition of “hydronics” Comparison to air systems Types of hydronic systems Heating Hot Water Chilled Water Condenser Water: Tower and Geo-exchange Glycol Water Types of central equipment Boilers Chillers Cooling Towers / Fluid Coolers Pumps Heat Exchangers Types of terminal equipment Coils Unit Heaters Fan Coil Units Chilled Beams Radiant System Comparison – Advantages / Disadvantages Steam and Steam Condensate Definition of “steam” Comparison to air and hydronic systems ASME Codes / Safety Types of steam and condensate systems Low Pressure High Pressure Condensate Collection: Gravity return, Pumped return, Vacuum Types of central equipment Boilers Heat Exchangers Make-up water systems Types of terminal equipment Coils Humidifiers Unit Heaters Fan Coil Units Radiant System Comparison - Advantages / Disadvantages Applications / Examples Field Tour - Wisconsin Energy Institute Controls: Building Automation Systems Definition / Purpose of “Building Automation System (BAS)” Types of HVAC control systems Local Centralized (Building-wide) Pneumatic Direct Digital Control Pneumatic-Hybrid Programmable Logic Control (PLC) Type of control equipment Valves Dampers Actuators Sensors and thermostats Types of Controls Proportional/Modulating Control Concepts Open/Closed Loop Control Wisconsin Energy Institute Sequence of Operations Mechanical Flow Diagrams INSTITUTE OF PROFESSIONAL AND TECHNICAL STUDIES (IPATS) Whatsapp: +92 3219606785, 03035530865 Call: +923315145601, 03495021336 Head Office: 2nd Floor, Yasir Plaza, Near Chatri Chowk, Khanna Pull, Qadeer Road, Rawalpindi, Pakistan Contact Office: +923219606785, 03035530865, 0331-5145601, 0349-5021336 Email: ipatsedu@gmail.com Website: www.ipatsedu.comProfessional Training of HVAC HEATING, VENTILATION,AIR CONDITIONING HVAC Course Heating, ventilation, and air conditioning (HVAC) is an indoor and vehicular environmental comforting technology. The technology aims to provide thermal comfort and high indoor air quality. The techniques of ventilating a building is further divided into a few types as mechanical, forced, and natural ventilation that will provide optimal temperature throughout the day and night. HVAC does the above function, through three different and integrated parts such as heating, ventilation, and air-conditioning at required points or wherever necessary. Installing, HVAC systems has become common in the recent days and also the required industry standard for construction of new buildings. Introduction to HVAC The need for HVAC References, standards and codes Terms, definitions and units HVAC system type overview Ventilation and air quality Buildings and energy efficiency Psychrometrics Properties of moist air Psychrometric chart Sensible and latent Combined processes Mixing of air streams Refrigeration Definitions Refrigerant selection Safety considerations Pressure and enthalpy Phase change concepts Vapor compression cycle System components Heating and Cooling Loads Loads and energy Heat transfer Weather data Infiltration and ventilation Cooling load calculations All Air Systems Definition of “all air systems” Types of all supply and return air systems Recirculating / Mixed Air Systems Dedicated Outside Air (DOAS) Systems Overhead / Dilution Type: Constant Volume (CAV) and Variable Volume (VAV) Displacement / UFAD Type Types of exhaust systems General – Toilet, etc. Laboratory, process, or other specialty systems Types of central equipment Packaged / Unitary systems Split systems Air handling units Fans Types of terminal equipment Air Terminal Units / VAV Boxes Grilles, Registers, & Diffusers System Comparison – Advantages / Disadvantages Hybrid approaches Applications / Examples Hydronic Systems Definition of “hydronics” Comparison to air systems Types of hydronic systems Heating Hot Water Chilled Water Condenser Water: Tower and Geo-exchange Glycol Water Types of central equipment Boilers Chillers Cooling Towers / Fluid Coolers Pumps Heat Exchangers Types of terminal equipment Coils Unit Heaters Fan Coil Units Chilled Beams Radiant System Comparison – Advantages / Disadvantages Steam and Steam Condensate Definition of “steam” Comparison to air and hydronic systems ASME Codes / Safety Types of steam and condensate systems Low Pressure High Pressure Condensate Collection: Gravity return, Pumped return, Vacuum Types of central equipment Boilers Heat Exchangers Make-up water systems Types of terminal equipment Coils Humidifiers Unit Heaters Fan Coil Units Radiant System Comparison - Advantages / Disadvantages Applications / Examples Field Tour - Wisconsin Energy Institute Controls: Building Automation Systems Definition / Purpose of “Building Automation System (BAS)” Types of HVAC control systems Local Centralized (Building-wide) Pneumatic Direct Digital Control Pneumatic-Hybrid Programmable Logic Control (PLC) Type of control equipment Valves Dampers Actuators Sensors and thermostats Types of Controls Proportional/Modulating Control Concepts Open/Closed Loop Control Wisconsin Energy Institute Sequence of Operations Mechanical Flow Diagrams INSTITUTE OF PROFESSIONAL AND TECHNICAL STUDIES (IPATS) Whatsapp: +92 3219606785, 03035530865 Call: +923315145601, 03495021336 Head Office: 2nd Floor, Yasir Plaza, Near Chatri Chowk, Khanna Pull, Qadeer Road, Rawalpindi, Pakistan Contact Office: +923219606785, 03035530865, 0331-5145601, 0349-5021336 Email: ipatsedu@gmail.com Website: www.ipatsedu.comProfessional Training of HVAC HEATING, VENTILATION,AIR CONDITIONING HVAC Course Heating, ventilation, and air conditioning (HVAC) is an indoor and vehicular environmental comforting technology. The technology aims to provide thermal comfort and high indoor air quality. The techniques of ventilating a building is further divided into a few types as mechanical, forced, and natural ventilation that will provide optimal temperature throughout the day and night. HVAC does the above function, through three different and integrated parts such as heating, ventilation, and air-conditioning at required points or wherever necessary. Installing, HVAC systems has become common in the recent days and also the required industry standard for construction of new buildings. Introduction to HVAC The need for HVAC References, standards and codes Terms, definitions and units HVAC system type overview Ventilation and air quality Buildings and energy efficiency Psychrometrics Properties of moist air Psychrometric chart Sensible and latent Combined processes Mixing of air streams Refrigeration Definitions Refrigerant selection Safety considerations Pressure and enthalpy Phase change concepts Vapor compression cycle System components Heating and Cooling Loads Loads and energy Heat transfer Weather data Infiltration and ventilation Cooling load calculations All Air Systems Definition of “all air systems” Types of all supply and return air systems Recirculating / Mixed Air Systems Dedicated Outside Air (DOAS) Systems Overhead / Dilution Type: Constant Volume (CAV) and Variable Volume (VAV) Displacement / UFAD Type Types of exhaust systems General – Toilet, etc. Laboratory, process, or other specialty systems Types of central equipment Packaged / Unitary systems Split systems Air handling units Fans Types of terminal equipment Air Terminal Units / VAV Boxes Grilles, Registers, & Diffusers System Comparison – Advantages / Disadvantages Hybrid approaches Applications / Examples Hydronic Systems Definition of “hydronics” Comparison to air systems Types of hydronic systems Heating Hot Water Chilled Water Condenser Water: Tower and Geo-exchange Glycol Water Types of central equipment Boilers Chillers Cooling Towers / Fluid Coolers Pumps Heat Exchangers Types of terminal equipment Coils Unit Heaters Fan Coil Units Chilled Beams Radiant System Comparison – Advantages / Disadvantages Steam and Steam Condensate Definition of “steam” Comparison to air and hydronic systems ASME Codes / Safety Types of steam and condensate systems Low Pressure High Pressure Condensate Collection: Gravity return, Pumped return, Vacuum Types of central equipment Boilers Heat Exchangers Make-up water systems Types of terminal equipment Coils Humidifiers Unit Heaters Fan Coil Units Radiant System Comparison - Advantages / Disadvantages Applications / Examples Field Tour - Wisconsin Energy Institute Controls: Building Automation Systems Definition / Purpose of “Building Automation System (BAS)” Types of HVAC control systems Local Centralized (Building-wide) Pneumatic Direct Digital Control Pneumatic-Hybrid Programmable Logic Control (PLC) Type of control equipment Valves Dampers Actuators Sensors and thermostats Types of Controls Proportional/Modulating Control Concepts Open/Closed Loop Control Wisconsin Energy Institute Sequence of Operations Mechanical Flow Diagrams INSTITUTE OF PROFESSIONAL AND TECHNICAL STUDIES (IPATS) Whatsapp: +92 3219606785, 03035530865 Call: +923315145601, 03495021336 Head Office: 2nd Floor, Yasir Plaza, Near Chatri Chowk, Khanna Pull, Qadeer Road, Rawalpindi, Pakistan Contact Office: +923219606785, 03035530865, 0331-5145601, 0349-5021336Professional Training of HVAC HEATING, VENTILATION,AIR CONDITIONING HVAC Course Heating, ventilation, and air conditioning (HVAC) is an indoor and vehicular environmental comforting technology. The technology aims to provide thermal comfort and high indoor air quality. The techniques of ventilating a building is further divided into a few types as mechanical, forced, and natural ventilation that will provide optimal temperature throughout the day and night. HVAC does the above function, through three different and integrated parts such as heating, ventilation, and air-conditioning at required points or wherever necessary. Installing, HVAC systems has become common in the recent days and also the required industry standard for construction of new buildings. Introduction to HVAC The need for HVAC References, standards and codes Terms, definitions and units HVAC system type overview Ventilation and air quality Buildings and energy efficiency Psychrometrics Properties of moist air Psychrometric chart Sensible and latent Combined processes Mixing of air streams Refrigeration Definitions Refrigerant selection Safety considerations Pressure and enthalpy Phase change concepts Vapor compression cycle System components Heating and Cooling Loads Loads and energy Heat transfer Weather data Infiltration and ventilation Cooling load calculations All Air Systems Definition of “all air systems” Types of all supply and return air systems Recirculating / Mixed Air Systems Dedicated Outside Air (DOAS) Systems Overhead / Dilution Type: Constant Volume (CAV) and Variable Volume (VAV) Displacement / UFAD Type Types of exhaust systems General – Toilet, etc. Laboratory, process, or other specialty systems Types of central equipment Packaged / Unitary systems Split systems Air handling units Fans Types of terminal equipment Air Terminal Units / VAV Boxes Grilles, Registers, & Diffusers System Comparison – Advantages / Disadvantages Hybrid approaches Applications / Examples Hydronic Systems Definition of “hydronics” Comparison to air systems Types of hydronic systems Heating Hot Water Chilled Water Condenser Water: Tower and Geo-exchange Glycol Water Types of central equipment Boilers Chillers Cooling Towers / Fluid Coolers Pumps Heat Exchangers Types of terminal equipment Coils Unit Heaters Fan Coil Units Chilled Beams Radiant System Comparison – Advantages / Disadvantages Steam and Steam Condensate Definition of “steam” Comparison to air and hydronic systems ASME Codes / Safety Types of steam and condensate systems Low Pressure High Pressure Condensate Collection: Gravity return, Pumped return, Vacuum Types of central equipment Boilers Heat Exchangers Make-up water systems Types of terminal equipment Coils Humidifiers Unit Heaters Fan Coil Units Radiant System Comparison - Advantages / Disadvantages Applications / Examples Field Tour - Wisconsin Energy Institute Controls: Building Automation Systems Definition / Purpose of “Building Automation System (BAS)” Types of HVAC control systems Local Centralized (Building-wide) Pneumatic Direct Digital Control Pneumatic-Hybrid Programmable Logic Control (PLC) Type of control equipment Valves Dampers Actuators Sensors and thermostats Types of Controls Proportional/Modulating Control Concepts Open/Closed Loop Control Wisconsin Energy Institute Sequence of Operations Mechanical Flow Diagrams INSTITUTE OF PROFESSIONAL AND TECHNICAL STUDIES (IPATS) Whatsapp: +92 3219606785, 03035530865 Call: +923315145601, 03495021336 Head Office: 2nd Floor, Yasir Plaza, Near Chatri Chowk, Khanna Pull, Qadeer Road, Rawalpindi, Pakistan Contact Office: +923219606785, 03035530865, 0331-5145601, 0349-5021336 Email: ipatsedu@gmail.com Website: www.ipatsedu.comProfessional Training of HVAC HEATING, VENTILATION,AIR CONDITIONING HVAC Course Heating, ventilation, and air conditioning (HVAC) is an indoor and vehicular environmental comforting technology. The technology aims to provide thermal comfort and high indoor air quality. The techniques of ventilating a building is further divided into a few types as mechanical, forced, and natural ventilation that will provide optimal temperature throughout the day and night. HVAC does the above function, through three different and integrated parts such as heating, ventilation, and air-conditioning at required points or wherever necessary. Installing, HVAC systems has become common in the recent days and also the required industry standard for construction of new buildings. Introduction to HVAC The need for HVAC References, standards and codes Terms, definitions and units HVAC system type overview Ventilation and air quality Buildings and energy efficiency Psychrometrics Properties of moist air Psychrometric chart Sensible and latent Combined processes Mixing of air streams Refrigeration Definitions Refrigerant selection Safety considerations Pressure and enthalpy Phase change concepts Vapor compression cycle System components Heating and Cooling Loads Loads and energy Heat transfer Weather data Infiltration and ventilation Cooling load calculations All Air Systems Definition of “all air systems” Types of all supply and return air systems Recirculating / Mixed Air Systems Dedicated Outside Air (DOAS) Systems Overhead / Dilution Type: Constant Volume (CAV) and Variable Volume (VAV) Displacement / UFAD Type Types of exhaust systems General – Toilet, etc. Laboratory, process, or other specialty systems Types of central equipment Packaged / Unitary systems Split systems Air handling units Fans Types of terminal equipment Air Terminal Units / VAV Boxes Grilles, Registers, & Diffusers System Comparison – Advantages / Disadvantages Hybrid approaches Applications / Examples Hydronic Systems Definition of “hydronics” Comparison to air systems Types of hydronic systems Heating Hot Water Chilled Water Condenser Water: Tower and Geo-exchange Glycol Water Types of central equipment Boilers Chillers Cooling Towers / Fluid Coolers Pumps Heat Exchangers Types of terminal equipment Coils Unit Heaters Fan Coil Units Chilled Beams Radiant System Comparison – Advantages / Disadvantages Steam and Steam Condensate Definition of “steam” Comparison to air and hydronic systems ASME Codes / Safety Types of steam and condensate systems Low Pressure High Pressure Condensate Collection: Gravity return, Pumped return, Vacuum Types of central equipment Boilers Heat Exchangers Make-up water systems Types of terminal equipment Coils Humidifiers Unit Heaters Fan Coil Units Radiant System Comparison - Advantages / Disadvantages Applications / Examples Field Tour - Wisconsin Energy Institute Controls: Building Automation Systems Definition / Purpose of “Building Automation System (BAS)” Types of HVAC control systems Local Centralized (Building-wide) Pneumatic Direct Digital Control Pneumatic-Hybrid Programmable Logic Control (PLC) Type of control equipment Valves Dampers Actuators Sensors and thermostats Types of Controls Proportional/Modulating Control Concepts Open/Closed Loop Control Wisconsin Energy Institute Sequence of Operations Mechanical Flow Diagrams INSTITUTE OF PROFESSIONAL AND TECHNICAL STUDIES (IPATS) Whatsapp: +92 3219606785, 03035530865 Call: +923315145601, 03495021336 Head Office: 2nd Floor, Yasir Plaza, Near Chatri Chowk, Khanna Pull, Qadeer Road, Rawalpindi, Pakistan Contact Office: +923219606785, 03035530865, 0331-5145601, 0349-5021336 Email: ipatsedu@gmail.com Website: www.ipatsedu.comProfessional Training of HVAC HEATING, VENTILATION,AIR CONDITIONING HVAC Course Heating, ventilation, and air conditioning (HVAC) is an indoor and vehicular environmental comforting technology. The technology aims to provide thermal comfort and high indoor air quality. The techniques of ventilating a building is further divided into a few types as mechanical, forced, and natural ventilation that will provide optimal temperature throughout the day and night. HVAC does the above function, through three different and integrated parts such as heating, ventilation, and air-conditioning at required points or wherever necessary. Installing, HVAC systems has become common in the recent days and also the required industry standard for construction of new buildings. Introduction to HVAC The need for HVAC References, standards and codes Terms, definitions and units HVAC system type overview Ventilation and air quality Buildings and energy efficiency Psychrometrics Properties of moist air Psychrometric chart Sensible and latent Combined processes Mixing of air streams Refrigeration Definitions Refrigerant selection Safety considerations Pressure and enthalpy Phase change concepts Vapor compression cycle System components Heating and Cooling Loads Loads and energy Heat transfer Weather data Infiltration and ventilation Cooling load calculations All Air Systems Definition of “all air systems” Types of all supply and return air systems Recirculating / Mixed Air Systems Dedicated Outside Air (DOAS) Systems Overhead / Dilution Type: Constant Volume (CAV) and Variable Volume (VAV) Displacement / UFAD Type Types of exhaust systems General – Toilet, etc. Laboratory, process, or other specialty systems Types of central equipment Packaged / Unitary systems Split systems Air handling units Fans Types of terminal equipment Air Terminal Units / VAV Boxes Grilles, Registers, & Diffusers System Comparison – Advantages / Disadvantages Hybrid approaches Applications / Examples Hydronic Systems Definition of “hydronics” Comparison to air systems Types of hydronic systems Heating Hot Water Chilled Water Condenser Water: Tower and Geo-exchange Glycol Water Types of central equipment Boilers Chillers Cooling Towers / Fluid Coolers Pumps Heat Exchangers Types of terminal equipment Coils Unit Heaters Fan Coil Units Chilled Beams Radiant System Comparison – Advantages / Disadvantages Steam and Steam Condensate Definition of “steam” Comparison to air and hydronic systems ASME Codes / Safety Types of steam and condensate systems Low Pressure High Pressure Condensate Collection: Gravity return, Pumped return, Vacuum Types of central equipment Boilers Heat Exchangers Make-up water systems Types of terminal equipment Coils Humidifiers Unit Heaters Fan Coil Units Radiant System Comparison - Advantages / Disadvantages Applications / Examples Field Tour - Wisconsin Energy Institute Controls: Building Automation Systems Definition / Purpose of “Building Automation System (BAS)” Types of HVAC control systems Local Centralized (Building-wide) Pneumatic Direct Digital Control Pneumatic-Hybrid Programmable Logic Control (PLC) Type of control equipment Valves Dampers Actuators Sensors and thermostats Types of Controls Proportional/Modulating Control Concepts Open/Closed Loop Control Wisconsin Energy Institute Sequence of Operations Mechanical Flow Diagrams INSTITUTE OF PROFESSIONAL AND TECHNICAL STUDIES (IPATS) Whatsapp: +92 3219606785, 03035530865 Call: +923315145601, 03495021336 Head Office: 2nd Floor, Yasir Plaza, Near Chatri Chowk, Khanna Pull, Qadeer Road, Rawalpindi, Pakistan Contact Office: +923219606785, 03035530865, 0331-5145601, 0349-5021336 Email: ipatsedu@gmail.com Website: www.ipatsedu.comProfessional Training of HVAC HEATING, VENTILATION,AIR CONDITIONING HVAC Course Heating, ventilation, and air conditioning (HVAC) is an indoor and vehicular environmental comforting technology. The technology aims to provide thermal comfort and high indoor air quality. The techniques of ventilating a building is further divided into a few types as mechanical, forced, and natural ventilation that will provide optimal temperature throughout the day and night. HVAC does the above function, through three different and integrated parts such as heating, ventilation, and air-conditioning at required points or wherever necessary. Installing, HVAC systems has become common in the recent days and also the required industry standard for construction of new buildings. Introduction to HVAC The need for HVAC References, standards and codes Terms, definitions and units HVAC system type overview Ventilation and air quality Buildings and energy efficiency Psychrometrics Properties of moist air Psychrometric chart Sensible and latent Combined processes Mixing of air streams Refrigeration Definitions Refrigerant selection Safety considerations Pressure and enthalpy Phase change concepts Vapor compression cycle System components Heating and Cooling Loads Loads and energy Heat transfer Weather data Infiltration and ventilation Cooling load calculations All Air Systems Definition of “all air systems” Types of all supply and return air systems Recirculating / Mixed Air Systems Dedicated Outside Air (DOAS) Systems Overhead / Dilution Type: Constant Volume (CAV) and Variable Volume (VAV) Displacement / UFAD Type Types of exhaust systems General – Toilet, etc. Laboratory, process, or other specialty systems Types of central equipment Packaged / Unitary systems Split systems Air handling units Fans Types of terminal equipment Air Terminal Units / VAV Boxes Grilles, Registers, & Diffusers System Comparison – Advantages / Disadvantages Hybrid approaches Applications / Examples Hydronic Systems Definition of “hydronics” Comparison to air systems Types of hydronic systems Heating Hot Water Chilled Water Condenser Water: Tower and Geo-exchange Glycol Water Types of central equipment Boilers Chillers Cooling Towers / Fluid Coolers Pumps Heat Exchangers Types of terminal equipment Coils Unit Heaters Fan Coil Units Chilled Beams Radiant System Comparison – Advantages / Disadvantages Steam and Steam Condensate Definition of “steam” Comparison to air and hydronic systems ASME Codes / Safety Types of steam and condensate systems Low Pressure High Pressure Condensate Collection: Gravity return, Pumped return, Vacuum Types of central equipment Boilers Heat Exchangers Make-up water systems Types of terminal equipment Coils Humidifiers Unit Heaters Fan Coil Units Radiant System Comparison - Advantages / Disadvantages Applications / Examples Field Tour - Wisconsin Energy Institute Controls: Building Automation Systems Definition / Purpose of “Building Automation System (BAS)” Types of HVAC control systems Local Centralized (Building-wide) Pneumatic Direct Digital Control Pneumatic-Hybrid Programmable Logic Control (PLC) Type of control equipment Valves Dampers Actuators Sensors and thermostats Types of Controls Proportional/Modulating Control Concepts Open/Closed Loop Control Wisconsin Energy Institute Sequence of Operations Mechanical Flow Diagrams INSTITUTE OF PROFESSIONAL AND TECHNICAL STUDIES (IPATS) Whatsapp: +92 3219606785, 03035530865 Call: +923315145601, 03495021336 Head Office: 2nd Floor, Yasir Plaza, Near Chatri Chowk, Khanna Pull, Qadeer Road, Rawalpindi, Pakistan Contact Office: +923219606785, 03035530865, 0331-5145601, 0349-5021336 Email: ipatsedu@gmail.com Website: www.ipatsedu.comProfessional Training of HVAC HEATING, VENTILATION,AIR CONDITIONING HVAC Course Heating, ventilation, and air conditioning (HVAC) is an indoor and vehicular environmental comforting technology. The technology aims to provide thermal comfort and high indoor air quality. The techniques of ventilating a building is further divided into a few types as mechanical, forced, and natural ventilation that will provide optimal temperature throughout the day and night. HVAC does the above function, through three different and integrated parts such as heating, ventilation, and air-conditioning at required points or wherever necessary. Installing, HVAC systems has become common in the recent days and also the required industry standard for construction of new buildings. Introduction to HVAC The need for HVAC References, standards and codes Terms, definitions and units HVAC system type overview Ventilation and air quality Buildings and energy efficiency Psychrometrics Properties of moist air Psychrometric chart Sensible and latent Combined processes Mixing of air streams Refrigeration Definitions Refrigerant selection Safety considerations Pressure and enthalpy Phase change concepts Vapor compression cycle System components Heating and Cooling Loads Loads and energy Heat transfer Weather data Infiltration and ventilation Cooling load calculations All Air Systems Definition of “all air systems” Types of all supply and return air systems Recirculating / Mixed Air Systems Dedicated Outside Air (DOAS) Systems Overhead / Dilution Type: Constant Volume (CAV) and Variable Volume (VAV) Displacement / UFAD Type Types of exhaust systems General – Toilet, etc. Laboratory, process, or other specialty systems Types of central equipment Packaged / Unitary systems Split systems Air handling units Fans Types of terminal equipment Air Terminal Units / VAV Boxes Grilles, Registers, & Diffusers System Comparison – Advantages / Disadvantages Hybrid approaches Applications / Examples Hydronic Systems Definition of “hydronics” Comparison to air systems Types of hydronic systems Heating Hot Water Chilled Water Condenser Water: Tower and Geo-exchange Glycol Water Types of central equipment Boilers Chillers Cooling Towers / Fluid Coolers Pumps Heat Exchangers Types of terminal equipment Coils Unit Heaters Fan Coil Units Chilled Beams Radiant System Comparison – Advantages / Disadvantages Steam and Steam Condensate Definition of “steam” Comparison to air and hydronic systems ASME Codes / Safety Types of steam and condensate systems Low Pressure High Pressure Condensate Collection: Gravity return, Pumped return, Vacuum Types of central equipment Boilers Heat Exchangers Make-up water systems Types of terminal equipment Coils Humidifiers Unit Heaters Fan Coil Units Radiant System Comparison - Advantages / Disadvantages Applications / Examples Field Tour - Wisconsin Energy Institute Controls: Building Automation Systems Definition / Purpose of “Building Automation System (BAS)” Types of HVAC control systems Local Centralized (Building-wide) Pneumatic Direct Digital Control Pneumatic-Hybrid Programmable Logic Control (PLC) Type of control equipment Valves Dampers Actuators Sensors and thermostats Types of Controls Proportional/Modulating Control Concepts Open/Closed Loop Control Wisconsin Energy Institute Sequence of Operations Mechanical Flow Diagrams INSTITUTE OF PROFESSIONAL AND TECHNICAL STUDIES (IPATS) Whatsapp: +92 3219606785, 03035530865 Call: +923315145601, 03495021336 Head Office: 2nd Floor, Yasir Plaza, Near Chatri Chowk, Khanna Pull, Qadeer Road, Rawalpindi, Pakistan Contact Office: +923219606785, 03035530865, 0331-5145601, 0349-5021336 Email: ipatsedu@gmail.com Website: www.ipatsedu.comProfessional Training of HVAC HEATING, VENTILATION,AIR CONDITIONING HVAC Course Heating, ventilation, and air conditioning (HVAC) is an indoor and vehicular environmental comforting technology. The technology aims to provide thermal comfort and high indoor air quality. The techniques of ventilating a building is further divided into a few types as mechanical, forced, and natural ventilation that will provide optimal temperature throughout the day and night. HVAC does the above function, through three different and integrated parts such as heating, ventilation, and air-conditioning at required points or wherever necessary. Installing, HVAC systems has become common in the recent days and also the required industry standard for construction of new buildings. Introduction to HVAC The need for HVAC References, standards and codes Terms, definitions and units HVAC system type overview Ventilation and air quality Buildings and energy efficiency Psychrometrics Properties of moist air Psychrometric chart Sensible and latent Combined processes Mixing of air streams Refrigeration Definitions Refrigerant selection Safety considerations Pressure and enthalpy Phase change concepts Vapor compression cycle System components Heating and Cooling Loads Loads and energy Heat transfer Weather data Infiltration and ventilation Cooling load calculations All Air Systems Definition of “all air systems” Types of all supply and return air systems Recirculating / Mixed Air Systems Dedicated Outside Air (DOAS) Systems Overhead / Dilution Type: Constant Volume (CAV) and Variable Volume (VAV) Displacement / UFAD Type Types of exhaust systems General – Toilet, etc. Laboratory, process, or other specialty systems Types of central equipment Packaged / Unitary systems Split systems Air handling units Fans Types of terminal equipment Air Terminal Units / VAV Boxes Grilles, Registers, & Diffusers System Comparison – Advantages / Disadvantages Hybrid approaches Applications / Examples Hydronic Systems Definition of “hydronics” Comparison to air systems Types of hydronic systems Heating Hot Water Chilled Water Condenser Water: Tower and Geo-exchange Glycol Water Types of central equipment Boilers Chillers Cooling Towers / Fluid Coolers Pumps Heat Exchangers Types of terminal equipment Coils Unit Heaters Fan Coil Units Chilled Beams Radiant System Comparison – Advantages / Disadvantages Steam and Steam Condensate Definition of “steam” Comparison to air and hydronic systems ASME Codes / Safety Types of steam and condensate systems Low Pressure High Pressure Condensate Collection: Gravity return, Pumped return, Vacuum Types of central equipment Boilers Heat Exchangers Make-up water systems Types of terminal equipment Coils Humidifiers Unit Heaters Fan Coil Units Radiant System Comparison - Advantages / Disadvantages Applications / Examples Field Tour - Wisconsin Energy Institute Controls: Building Automation Systems Definition / Purpose of “Building Automation System (BAS)” Types of HVAC control systems Local Centralized (Building-wide) Pneumatic Direct Digital Control Pneumatic-Hybrid Programmable Logic Control (PLC) Type of control equipment Valves Dampers Actuators Sensors and thermostats Types of Controls Proportional/Modulating Control Concepts Open/Closed Loop Control Wisconsin Energy Institute Sequence of Operations Mechanical Flow Diagrams INSTITUTE OF PROFESSIONAL AND TECHNICAL STUDIES (IPATS) Whatsapp: +92 3219606785, 03035530865 Call: +923315145601, 03495021336 Head Office: 2nd Floor, Yasir Plaza, Near Chatri Chowk, Khanna Pull, Qadeer Road, Rawalpindi, Pakistan Contact Office: +923219606785, 03035530865, 0331-5145601, 0349-5021336 Email: ipatsedu@gmail.com Website: www.ipatsedu.comProfessional Training of HVAC HEATING, VENTILATION,AIR CONDITIONING HVAC Course Heating, ventilation, and air conditioning (HVAC) is an indoor and vehicular environmental comforting technology. The technology aims to provide thermal comfort and high indoor air quality. The techniques of ventilating a building is further divided into a few types as mechanical, forced, and natural ventilation that will provide optimal temperature throughout the day and night. HVAC does the above function, through three different and integrated parts such as heating, ventilation, and air-conditioning at required points or wherever necessary from Oct 26th

Mofa/Embassy attested AC & Refrigeration Technician Experience based Diploma in Rawalpindi jhelum shamsabad murree road islamabad 03115193625, Mofa attested Experience based Electrician Diploma In Rawalpindi Sargodha Islamabad, Experience based AC Technician Diploma Embassy attested Competency Based AC Diploma In Pakistan, 03115193625, 03354176949. Competency Experience Based Electrician Diploma in rawalpindi chakwal jhelum lahore 3115193625, Competency Experience Based Electrician Diploma in rawalpindi gujrat jhelum 3115193625, 3354176949, People Who have Work Experience in Relevant Fields But Don't Have Professional Certifications & Diplomas, We are providing them Experience based Diploma, Our Diplomas are World Wide Acceptable with UK/USA/Pak/U.A.E/ KSA/ China/ International Certifications in Rawalpindi, Islamabad For admission and queries call 3115193625, 3354176949 INTERNATIONAL COLLEGE OF TECHNICAL EDUCATION Pakistan No.1 IT Training Institute, For More Information Visit Our Website www.courses.com.pk, www.icollegete.com. Mofa attested electrician diploma in pakistan International college of technical Education Offers Competency Based/ experience based AC diploma Government Diploma in Air-Conditioning (AC) Technician for Dubai UAE Qatar Saudi Oman Riyadh +923115193625, Government Diploma in AC Technician for Dubai UAE Qatar Saudi Oman Riyadh Jeddah Saudi +923115193625 Government Diploma in HVAC for abu dhabi Dubai UAE Qatar Bahrain Saudi Oman jeddah +923354176949, Government Diploma in AC Technician for Dubai UAE Qatar Bahrain Saudi Oman Muscat +923115193625, +923354176949. World Wide Acceptable with UK/USA/Pak/ U.A.E/KSA/China/ International Certifications in Rawalpindi, Islamabad, Safety Inspector Government Diploma for Dubai UAE Qatar Bahrain Saudi Oman in rawalpindi pakistan chakwal jhelum gujrat +923115193625, Diploma in Manager Health & Safety for Dubai, Sharjah, abu dhabi. registered recognized, approved and authorized institute INTERNATIONAL COLLEGE OF TECHNICAL EDUCATION Pakistan No.1 IT Training Institute, registered recognized, approved and authorized institute For More Information Visit Our Website www.courses.com.pk, www.icollegete.com. AC technicians, also called air conditioning mechanics and installers, specialize in the installation, maintenance or repair of air conditioning units in homes. Although technicians tend to specialize in one of the two areas, they are trained to be able to both install and perform maintenance/repairs on AC units. Installers place equipment, as well as connect water supply lines, air pumps, wiring and controls. Maintenance and repair technicians keep systems operating efficiently by checking equipment and looking for leaks; they make repairs using hand and power tools, a variety of measurement gauges and acetylene torches. AC Technician Course is a very important domain of building HVAC service which is having huge demand throughout the world. The following to be applied in a manner consistent with its purpose: Basic concepts of HVAC system, Knowledge about AC components and their working functions, Understanding of refrigeration cycle, Basic knowledge in electrical field.Based upon the precaution checklist one should be capable of installing and also supervising the ease of handling and maintaining of tools, Preparation of installation checklist and service reports, Preventive maintenance, Diagnosis of troubleshooting and Behavior skills.Meanwhile one has to have the basic knowledge of unitary air conditioning unit’s installation, and also the estimation of works and time management. Government Recognized 1 Year & 2 Years Diplomas in IT, HVAC systems,Technical, Safety , Management. The air conditioning technicians are responsible for installing, maintaining, and repairing of air-conditioning equipment. They can even do heating or refrigeration work, as they are trained to work on both heating and cooling units, including motors, switches, pumps, wiring, thermostats and fans. Responsibilities: The air conditioning technicians install, inspect, maintain, and repair air conditioner. They ventilate equipment and controls making sure they operate efficiently and continuously. They perform regular maintenance work on cooling units. They diagnose electrical and mechanical defects and malfunctions. They install, replace, or repair equipment that has been damaged. They make adjustment and do calibrations of thermostatic controls. They install new air-conditioning systems and equipment. They inspect and maintain refrigerators and ice machines, and chilled water supply systems. They clean blowers and coils, check tensions of belts and motors. They make plans and designs of new air-conditioning systems including their installation and maintenance. Skills: The air conditioning technicians should be able to work in places where they are exposed to dust, fumes, noise, toxic materials and high voltage equipment. They should also be capable of working in confined and hot spaces like roofs, crawl ways and attics. They may also have to work in adverse weather and may be required to lift heavy objects, bend, stoop, kneel or stand for long stretches of time. MOFA/Embassy Attested AC & Refrigeration Technician Experience based Diploma in Rawalpindi Jhelum Islamabad 03115193625, 03354176949.

Air Conditioning Ac Technician Experience based diploma course in rawalpindi shamsabad murree road islamabad Air Conditioning Experience based Diploma AC Technician Course in Rawalpindi Shamsabad Murree Road Islamabad pakistan 03115193625 Ac Technician Diploma experience based Air Conditioning World Wide Acceptable with UK/USA/Pak/ U.A.E/KSA/China/ International Certifications in Rawalpindi, Islamabad, Safety Inspector Government Diploma for Dubai UAE Qatar Bahrain Saudia Oman in rawalpindi pakistan chakwal jhelum gujrat +923115193625, Diploma in Manager Health & Safety for Dubai, Sharjah, abu dhabi. registered recognized, approved and authorized institute INTERNATIONAL COLLEGE OF TECHNICAL EDUCATION Pakistan No.1 IT Training Institute, registered recognized, approved and authorized institute For More Information Visit Our Website www.courses.com.pk, www.icollegete.com. Government Recognized 1 Year & 2 Years Diplomas in IT, HVAC systems,Technical, Safety , Management. The airconditioning technicians are responsible for installing, maintaining, and repairing of air-conditioning equipment. They can even do heating or refrigeration work, as they are trained to work on both heating and cooling units, including motors, switches, pumps, wiring, thermostats and fans. Responsibilities: The airconditioning technicians install, inspect, maintain, and repair air conditioner. They ventilate equipment and controls making sure they operate efficiently and continuously. They perform regular maintenance work on cooling units. They diagnose electrical and mechanical defects and malfunctions. They install, replace, or repair equipment that has been damaged. They make adjustment and do calibrations of thermostatic controls. They install new air-conditioning systems and equipment. They inspect and maintain refrigerators and ice machines, and chilled water supply systems. They clean blowers and coils, check tensions of belts and motors. They make plans and designs of new air-conditioning systems including their installation and maintenance. Skills: The airconditioning technicians should be able to work in places where they are exposed to dust, fumes, noise, toxic materials and high voltage equipment. They should also be capable of working in confined and hot spaces like roofs, crawl ways and attics. They may also have to work in adverse weather and may be required to lift heavy objects, bend, stoop, kneel or stand for long stretches of time. registered recognized, approved and authorized institute INTERNATIONAL COLLEGE OF TECHNICAL EDUCATION Pakistan No.1 IT Training Institute, registered recognized, approved and authorized institute For More Information Visit Our Website www.courses.com.pk, www.icollegete.com. Air Conditioning Ac Technician Experience based diploma in rawalpindi murree road islamabad Admission open for admission and queries call 03115193625 ,03354176949 registered recognized, approved and authorized institute INTERNATIONAL COLLEGE OF TECHNICAL EDUCATION Pakistan No.1 IT Training Institute, registered recognized, approved and authorized institute For More Information Visit Our Website www.courses.com.pk, www.icollegete.com.

AC Technician & refrigeration course in rawalpindi punjab shamsabad 03354176949 AC Technician & Refrigeration course in rawalpindi punjab shamsabad 03115193625 International college of technical education offers AIR Conditioning Ac technician & refrigeration course, The air conditioning technicians are responsible for installing, maintaining, and repairing of air-conditioning equipment. They can even do heating or refrigeration work, as they are trained to work on both heating and cooling units, including motors, switches, pumps, wiring, thermostats and fans. Responsibilities: The air conditioning technicians install, inspect, maintain, and repair air conditioner. They ventilate equipment and controls making sure they operate efficiently and continuously. They perform regular maintenance work on cooling units. They diagnose electrical and mechanical defects and malfunctions. They install, replace, or repair equipment that has been damaged. They make adjustment and do calibrations of thermostatic controls. They install new air-conditioning systems and equipment. They inspect and maintain refrigerators and ice machines, and chilled water supply systems. They clean blowers and coils, check tensions of belts and motors. They make plans and designs of new air-conditioning systems including their installation and maintenance. Skills: The air conditioning technicians should be able to work in places where they are exposed to dust, fumes, noise, toxic materials and high voltage equipment. They should also be capable of working in confined and hot spaces like roofs, crawl ways and attics. They may also have to work in adverse weather and may be required to lift heavy objects, bend, stoop, kneel or stand for long stretches of time. Ac Technician & Refrigeration course in rawalpindi punjab pakistan 03354176949, 03115193625 for more visit our website www.icollegete.com. www.courses.com.pk.