System set

Overview The infrared converter slag detection system uses a far-infrared thermal imager to monitor the situation of converter tapping in real time, and is connected to the main control computer in the electrical room through the conversion and transmission of video signals. The radiation intensity in the infrared wavelength range of 7-14um is different to distinguish molten steel and slag. In the later stage of the converter tapping, the molten steel gradually decreases, and the steelmaking slag is involved in the molten steel and flows out of the tapping hole. After the thermal imager recognizes the steelmaking slag in the imaging temperature measurement, it will give an alarm according to the slag content ratio threshold set by the software. The thermal imager will start the slide plate to close the tapping hole, so as to realize the control of the slag in the converter tapping, and ensure the maximum yield of molten steel and the minimum control of the steelmaking slag content. The effect of slag detection in converter tapping is of great significance to the control effect of the slag amount. The converter slag detection and control system developed by our company conducts non-contact monitoring of the tapping steel flow through the far-infrared detector thermal imager. It can detect the slag condition in real time and output an alarm signal and control system, which can replace manual visual inspection and provide accurate, efficient and stable slag detection effect. When the system finds the slag, the intelligent control unit quickly makes a judgment of lifting the furnace and blocking the slag and outputs an alarm signal. As shown in Figure 1, the system includes thermal imager, front purge protection box, front electrical box, power distribution cabinet, main control monitor, monitor of rocking furnace chamber, sound and light alarm, infrared converter slag monitoring software system, etc. The features of thermal imager 1. The temperature measurement range is 200°C ~ 2000°C, high temperature measurement accuracy, and multiple temperature measurement intervals can be set. 2. High-resolution thermal imaging system, the imaging picture is clear, and the imaging color can be freely marked according to the set temperature. 3. With hot zone alarm function, the alarm zone and temperature range can be set arbitrarily. 4. With hot zone tracking function 5. Equipped with special 7~14um infrared filter lens The technical parameters 1. Temperature measurement range: 200°C ~ 2000°C 2. Temperature measurement accuracy: 2% 3. Detection accuracy and alarm accuracy: ≥98% 4. Resolution: ≥ 0.5℃ 5. Pixels: 640x240PT 6. Band: 7~14um 7. Field of view: 7.5°×5.5° 8. Frame rate: ≥ 25 frames/sec 9. Equipment service life: ≥5 years 10. The normal operation rate of the automatic control system: ≥99%

Overview The WGS-L200 Laser Slab/ Plate Steel Width Measuring System adopts the principle of double laser triangulation reflection to process the online measurement of the steel plate on the roller bed, and combines the high-speed digital signal processing technology and programming software to process the signal correspondingly, and displays the relevant data and measurement curve, so as to realize the accurate control for steelmaking process during the production. The WGS-L200 Laser Slab/Plate Steel Width Measuring System is mainly composed of computing processing software and hardware systems such as testing equipment, computing equipment. The hardware system consists of 2 sets of laser triangulation rangefinding system, on-site signal acquisition and transmission system, operation unit, host analysis and control alarm system, etc. The software of WGS-L200 laser slab/ plate steel width measuring system mainly includes data acquisition and analysis, alarm software and data visualization operation software in the host system. The data analysis system analyzes and converts the data transmitted by the signal acquisition and analysis system into the visual data of the main control room, and completes the width measurement monitoring work in the slab production operation through the set alarm threshold. The measuring principle of the system The WGS-L200 Laser Slab/Plate Steel Width Measuring System is mainly composed of computing processing software and hardware systems such as testing equipment, computing equipment. The hardware system consists of 2 sets of laser triangulation rangefinding system, on-site signal acquisition and transmission system, operation unit, host analysis and control alarm system, etc. The software of WGS-L200 laser slab/ plate steel width measuring system mainly includes data acquisition and analysis, alarm software and data visualization operation software in the host system. The data analysis system analyzes and converts the data transmitted by the signal acquisition and analysis system into the visual data of the main control room, and completes the width measurement monitoring work in the slab production operation through the set alarm threshold. The features of the system 1. Using the principle of laser triangulation reflection, it is very suitable for dynamic measurement, and the dynamic measurement accuracy is high. 2. Non-contact type, namely, the laser rangefinding sensor is installed on the upper and lower sides of the strip conveying guide groove, and the width measurement device is not in direct contact with the strip. 3. Continuous and fast sampling measurement, the sampling frequency is 300Hz-2000Hz. The measurement frequency can be set freely to realize high-speed width detection. 4. It can effectively identify and compensate the beating, inclination, side deflection and profile of the tested plate; 5. Excellent mathematical model realizes accurate width detection of the bad profile; 6. The software interface is good, powerful, easy to operate and maintenance-free; 7. The software has self-diagnosis function; 8. Full digital detection, automatic calibration system; 9. High measurement accuracy and fast response; 10. Using optical fiber signal transmission; 11. Quality control alarm; The technical parameters Measuring distance: 0.5-0.8m (according to the on-site environment) Resolution: ±0.1mm Repeatability: 0.2mm Measurement output frequency: 100-3KHz Laser class: 2 (IEC60825-1:2014) Protection class: IP65 Communication method: TCP/IP communication

Overview The continuous casting vibration type ladle slag detection device is used to detect the slag content of the ladle nozzle in the steelmaking continuous casting process, so as to improve the cleanliness of the tundish molten steel and obtain the best yield of the ladle molten steel. The device adopts the principle of vibration detection. The LAG-S200 continuous casting ladle slag automatic detection system is developed by Wuhan CenterRise M&C Engineering Co., Ltd. after many years of research with many scientific research institutes, and fully combined with the actual situation on site. It has a real field application value as a continuous casting ladle slag automatic detection system. The meaning of the system 1. Reduce the amount of tundish slag 2. Improve the purity of molten steel 3. Improve the life of the tundish 4. Reduce sliding nozzle erosion 5. Reduce nozzle blockage 6. Increase continuous pouring heats 7. Reduce the amount of residual steel in the ladle when high-quality steel is casting 8. Improve the yield of molten steel 9. Improve the quality of continuous casting billets In order to improve the purity of the molten steel in the tundish, and improve the quality of the casting billet, especially to improve the quality of the billet in the transition section, and reduce the amount of residual steel in the high-quality ladle, and prolong the life of the tundish lining, and increase the continuous casting heats, it’s necessary to detect and control the slag in the later stage of continuous casting ladle casting. The working principle The LAG-S200 continuous casting ladle slag automatic monitoring system detects the slag state during the pouring process by receiving the vibration signal of the mechanical operating arm of the ladle nozzle. In the process of molten steel pouring, when molten steel flows through the long nozzle and pours into the tundish, the molten steel impacts the wall of the long nozzle and causes the vibration of the mechanical operating arm used to support the long nozzle. Since the specific gravity of the steelmaking slag is less than half of the specific gravity of the molten steel, it floats on the surface of the molten steel, and the steelmaking slag appears when the molten steel is about to be all poured. At this time, due to the high viscosity and poor fluidity of light steelmaking slag, the impact force of the mixed flow of molten steel and steel slag on the wall of the long nozzle is quite different from that of pure molten steel. The system mainly monitors the ladle slag of the continuous casting by measuring and analyzing the vibration difference of the mechanical operating arm. The vibration signal is connected to the operation control unit of the system control cabinet through the front-stage conditioning and amplification module through the sensor installed in the middle of the operating rod. After processing, it is output to the industrial computer for operation and analysis. The slag signal detected by the system is output from the system control cabinet to the front-end control unit, and then control the alarm horn and alarm light to work, or issue an instruction to close the ladle nozzle. The features of the system (1) It is easy to install, basically no modification is made to the field equipment, and the installation and debugging work will not affect the normal production of the enterprise. (2) The detection accuracy is high, and the effective rate is greater than or equal to 95%. The threshold of slag volume is accurately set, the output control function is powerful. It has excellent performance in technical indicators such as the sensor service life and sensor usage times. (3) The sensor is installed at a position far away from the molten steel, and is cooled by a special refrigeration device for 24 hours. The outer layer adopts a composite protection structure, which has a long service life. (4) Adopt professional and targeted signal processing methods to obtain the vibration characteristic parameters of the ladle slag, and analyze, reason and judge the effective slag signal through the vibration signal database, which has a high accuracy of slag alarm. (5) The architecture is established based on the artificial intelligence network, which has the functions of self-learning and self-induction. (6) The equipment adopts a modular design. The failure of each module will not affect other parts, which ensure more reliable operation of the system and easy maintenance. (7) The alarm display device is used on site to visually indicate the flow state of molten steel and slag. When slag carryover strats, we can choose automatic mode or manual mode. In both modes, the system will give audible and visual alarm signals to remind on-site operators. (8) The system has a powerful database function. Including the comparison function for last two ladles of casting time record, the system automatically stores the running data, and generates a record file every day. (9) The system has the function of automatically controlling the ladle nozzle. The control unit is an auxiliary system of the system, which is interconnected with the ladle slag detection system to automatically control the opening of the ladle nozzle and realize the whole-process control of the liquid level of the molten steel in the tundish. The composition of the system The LAG-S200 slag detection system consists of: vibration detection sensor, pre-signal amplifier, slag detection operation unit, tundish liquid level control unit, on-site operation indication box, and process control cabinet. 1. Vibration detection sensor: It is installed on the robotic arm of the stopper to detect the vibration signal of the whole casting process of the ladle. 2. Pre-signal amplifier: Amplify, convert and transmit the weak vibration signal detected by the vibration detection sensor. 3. Slag detection operation unit: Analyze, judge and discriminate the vibration signal to realize the discrimination of all steel, mixed slag and full slag , and output the slag alarm signal. 4. Tundish liquid level control unit: Accept the control signal of the tundish nozzle and the ladle nozzle, and realize automatic or manual control to the ladle slag according to the requirements. 5. On-site operation instruction box: Provides man-machine exchange for slag alarm indication, fault indication, system activation mode selection, and control mode selection. 6. Process control cabinet, providing power management, displaying man-machine interface and setting management. The parameters of the system 1. The system controls the slag inclusion in molten steel with high precision and closes the nozzle in real time. 2. Improve the quality of steel, reduce defective products, and improve the yield. 3. The yield of molten steel is increased by 0.3%-0.5%. The nozzle can be automatically closed, so that the disadvantage of untimely manual response is overcome and less molten steel remains in the ladle. The threshold value of molten steel (slag threshold) is set by the user within a wide range. 4. No artificial factors are involved, high reliability, good repeatability or consistency. 5. The steelmaking slag does not pass through or rarely flows into the tundish, which increases the service life of the refractory material and the sliding nozzle. 6. Reduce the blockage of the tundish nozzle and increase the number of continuous pouring heats of the tundish.

Overview The automatic control for the molten steel level of the mold is one of the key technologies of continuous casting production. It is very important to reduce the labor intensity of workers, improve production efficiency, improve the quality and output of casting billet, reduce overflow and breakout of steel and improve the management level of steelmaking and continuous casting. The molten steel is poured into the mold. In order to prevent overflow, the molten steel level must be kept stable. Otherwise, during the casting process, if the level will fluctuate too much, and slag will be involved, forming surface slag inclusion on the surface of the casting billet, affecting the quality of the billet. The test points out that the relationship between the level fluctuation and the depth of casting billet surface slag inclusion is as follows: The experience has shown that surface slag inclusions can be eliminated when the level fluctuation is within ±10mm. At the same time, if the level fluctuation is more than 10mm, the rate of longitudinal cracks on the casting billet surface is 30%. It means that the level fluctuation directly affects the surface quality of the casting billet. The principle of the system The eddy current type molten steel level gauge is the key to the system. The system operates reliably and has excellent performance: high temperature resistance, strong anti-interference ability, fast dynamic response (lag time 0.10s), high detection accuracy (±05mm), and large measurement range (0-150mm). The selected electromagnetic field frequency ensures that the level detection probe only detects the level change of the mold and does not detect the mold flux or steel slag layer. The system has the advantages of simple operation and no radiation protection problems. The system is insensitive to argon blowing, and its sensors can be mounted on the tundish car or on the platform. The sensor is cooled by compressed air during use. The principle is shown in the figure A high-frequency exciting winding is installed above the molten steel surface of the mold. The high-frequency magnetic field generated by the high-frequency exciting winding induces eddy currents on the molten steel surface to form a magnetic field. The magnetic field generated by the induced eddy current is in the opposite direction to the magnetic field generated by the high-frequency exciting winding, which changes the impedance of the high-frequency exciting winding. Under the condition that the winding material and structure, steel grade, temperature remain unchanged, the coil impedance change only has a single-value function relationship with the height of the molten steel level. As long as the impedance change of the high-frequency winding is detected, the change of the molten steel level in the mold can be converted. The components of the system Continuous casting mold level automatic control system is composed of eddy current tyoe molten steel level gauge, controller and digital actuator for adjusting the opening of tundish stopper. The detection end of the mold level automatic control system is ① eddy current displacement sensor, which uses the eddy current mutual inductance effect between the energized coil and the metal conductor to detect the distance. The effective signal of the eddy current sensor is amplified and linearized by the circuit of ② mold level gauge, which converts the 0-150mm change in the molten steel level of the mold into a standard signal of 4-20mA.DC, and then transmits it to the ③ control computer to complete data processing and system control functions. We can also control the actuator manually and automatically through the ④on-site operation display control panel, and the opening of the stopper is controlled by the ⑤ actuator to realize the automatic control of the molten steel level. 1 Eddy current sensor; 2 mold level gauge; 3 control computer; 4 On-site operation display control panel; 5 digital actuator; The control principle of the system The system can be set to four control modes: automatic, semi-automatic, manual and motor clutch. The automatic mode is the closed-loop control system of the molten steel level, and control the opening of the stopper by the digital actuator; the semi-automatic mode uses opening degree setter and digital actuator to set the opening of the stopper manually; the manual mode is to open and close the button directly to control the opening of the stopper; the motor clutch mode is quickly changed from any of the above control methods to manual stopper operation. The functions of the system also include: display and record of molten steel level, nozzle opening and casting speed; setting of molten steel level and nozzle opening; alarm of molten steel level at limit value etc. In addition to taking the detection of molten steel level as the main feedback signal of the control system, the control system also considers various interference factors that have an impact on the level control. These interference factors include: 1. The influence of the change of the flow characteristics on the control system after the melt loss of the stopper 2. The influence of the weight change of molten steel in the tundish on the control system 3. The influence of the change of the casting speed of the continuous casting machine on the control system 4. The influence of the mold width change (the mold width is adjustable) on the control system 5. The influence of the vibration frequency and amplitude of the mold on the molten steel level gauge The function and software implementation In order to overcome these disturbances, the mold level control strategy adopts PID control. And on the basis of PID control, self-adaptive correction and feedforward control are introduced to form an advanced control system. The level control is the main loop, and there is a proportional gain of the main loop controller. According to the self-adaptive correction of the mold width change and feedforward compensation of casting speed, so as to further reduce and eliminate liquid level fluctuations caused by mold width adjustment and casting speed changes. In order to reduce the frequent action of the stopper, the system adopts the intergarting time change of the controller, and automatically selects a longer intergarting time when the molten steel level fluctuates lightly. And the system will choose a shorter intergrating time when molten steel level fluctuates greatly. Thereby, the fluctuation of the controlled object caused by the frequent action of the stopper rod is suppressed. In the signal processing of molten steel level gauge, an appropriate filtering link is added and the vibration frequency synchronous filter is used for filtering processing, which can overcome the interference of mold vibration frequency and amplitude variation.

Overview The system realizes the fixed-length measurement of the width, thickness and length of the continuously cast product through machine vision and laser rangefinding system. The measured data is transmitted to the host system through the optical fiber. The host system calculates the weight of each billet according to different steel grades and specific gravity, so that we can realize the fixed length measurement and fixed weight control of the cast products and the precise control of the steelmaking process in the production process. After cutting the billets by fixed weight and length, the fixed weight cut-to-length system is checked by the online weighing measurement system, so as to give feedback to the fixed length model of control system. The slab number (automatic checking) can also be automatically identified online by using machine vision, and the weight and slab number can be automatically stored in the local database for use in the production and management system. The measuring principle of the system On the upper surface of the billet, a set of linear CCD cameras and a laser rangefinding instrument are respectively installed. Through machine vision and laser correction, we can achieve precise measurement of the cast products’ shape. Through accurate cast products’ shape monitoring, the billet thermal expansion coefficient of cast products and cast products’ density at the current temperature, we can obtain the quality of the billet. At the same time, we can achieve high-precision quality cut-to-length , namely, fixed-weight and fixed-length. The system can be matched with the weight detection and calibration system. The system adopts the online barrier-free hidden integral roller table weighing method for continuous casting products, and connects its weighing data into the intelligent control model. The model and steel billet weighing system, and the fixed weight cut-to-length system realize the closed-loop control of the system model, and optimize the fixed weight accuracy through automatic signal collection. The features of the equipment The cutting control technology for fixed-length and fixed-weight of cast products is a concrete manifestation of the lean production management of steel products. In the era of high-quality competition of steel products, only high-end intelligent technology and management can reduce costs, improve quality and market competitiveness. 1. Data management can be carried out according to shifts, pouring times, days, weeks, months, etc., as well as data management according to specifications, production capacity, quality, etc. 2. Each stream can send out signals such as pre-clamping, clamping, cutting, roll-up, roll-down and return of the cutting car according to the user's requirements. 3. The detection and cutting precision is high, the controllable length sizing accuracy is ±1mm, and the quality sizing accuracy is more than 1.5‰. 4. It is not sensitive to other high-intensity light interference, and overcomes the influence of light sources such as sunlight and arc welding. 5. The monitor displays the running status of the current hot billet in real time and displays the corresponding parameters. 6. Laser rangefinding and CCD machine vision are used to calculate the weight of the cast products and optimize the cutting to length. 7. Historical cutting data is automatically stored, and the system can set rules for historical data. 8. Support the free transformation of fixed length, and a variety of operation modes are available for the operator to choose. 9. Adopt advanced high temperature laser measurement and high pixel linear CCD technology. 10. The system provides abundant interfaces, which can communicate with the PLC control. 11. Applicable to all kinds of continuous casting machine flame cutting system. 12. Provide automatic, upper and manual cutting control. The main technical requirements 1. Width range of the inspected cast product: 120~2000 mm 2. Length range of the inspected cast product: 1000~20000 mm 3. Thickness range of the inspected cast product: 35~400 mm 4. Steel billet moving speed: 3.5 m/s 5. Billet running speed: 6.5m/min 6. Temperature of the measured steel billet: 0~850 °C 7. Measurement accuracy: width ±0.2mm thickness ±0.2mm length ±0.2mm 8. Fixed weight accuracy: 0.8‰ (temperature model verification) 9. Quality inspection check: 1‰

Descriptions: Chinese PABX for All Type of Communication, No Need for Master Telephone Set, * 3 Lines and 8 Extensions Are Built-in, * Built-in Cli Card, * Built-in Ogm Card, * You Can Connect Any Telephone Set, * Gsm Device Support, * Call Waiting & Call Forwarding, * Connect Any Telephone Set * Music On Hold Warranty: 1 Year Warranty, Get This Exchange in Just Rs.12,999 Only, Please Call For Order Booking We also Provide CCTV Camera System, Fire Alarm & Fire Extinguisher, Time Attendance Machine.

Alfazal Engineering give you the following tips are supposed to be a realistic manual to make certain the secure and right set up of cable ladder and cable tray structures and channel aid and different aid structures. These suggestions aren't supposed to cowl all info or versions in cable ladder and cable tray set up and do now no longer offer for each set up contingency. It is usually recommended that the paintings defined on this manual is executed with the aid of using in a position individuals who're acquainted with the goods being set up and the protection requirements related to them. Structural characteristics When thinking about the set up of the cable helps machine it's miles vital to keep away from the slicing or drilling of structural constructing participants without the approval of the venture chief on site.

Overview The all-digital non-touching infrared/laser automatic cut-to-length system developed by Wuhan CenterRise M&C Engineering Co., Ltd. is the first digital measurement, digital transmission, digital positioning and digital control technology in China. It is suitable for the primary and secondary cutting of continuously cast product of square billets, rectangular billets, slabs, round billets and shaped billets. It can automatically cut 1-24 strands billets to length at the same time, and display the casting speed and running status of each billet. The system has high measurement and control accuracy and strong anti-interference ability, which improves the output and quality of the cast products and reduces the labor intensity of the operator. The whole system has the advantages of low investment, simple installation, debugging and operation, and basically maintenance free. No need to change the original production equipment, a major breakthrough in the automatic cut-to-length cutting method, and it is also an important part of the continuous casting process, which has been highly praised by experts and manufacturers. Digital infrared cutting to length can also provide high-definition solutions, so that the measurement error is ±2mm, and the system can support 4 strands high-definition CCD image measurement. The features of the system 1. The system adopts advanced digital image processing technology (non-touching type) to identify the length of hot billet online, automatically controls the flame cutting machine to cut the hot billet to a certain length, detects and displays the running status and casting speed, and collects the image information of the moving billet from a long distance through an infrared camera. 2. The computer processes the image information by pattern recognition program, forms the operation information and converts it into the electrical signal of the specified format, so that the hot billet can be cut by the actuator. The system can cut the 1-24 strands to length at the same time with an infrared camera. 3. A schematic diagram of the overall layout and working principle of the system is shown in Figure 1. Fig 1 The functions of the system 1. Applicable to all kinds of continuous casting machine flame cutting system. 2. Adopt advanced digital image pickup technology. 3. It is not sensitive to other high-intensity light interference, and overcomes the influence of light sources such as sunlight and arc welding. 4. The system provides abundant interfaces, which can communicate with with the PLC. 5. The fixed-length parameters and data can be directly modified by the secondary system to optimize the fixed-length cutting. 6. Historical cutting data is automatically stored, and the system can set rules for historical data. 7. Support the free transformation of fixed length, and a variety of operation modes are available for the operator to choose. 8. Each stream can send out signals such as pre-clamping, clamping, cutting, roll-up, roll-down and return of the cutting car according to the user's requirements. 9. The monitor displays the running status of the current hot billet in real time and displays the corresponding parameters. 10. Data management can be carried out according to shifts, pouring times, days, weeks, months, etc., as well as data management according to specifications, production capacity, quality, etc. 11. Provide automatic, manual cutting control. 12. The detection and cutting precision is high, and the controllable precision is ±5mm. The extension of the system The system can install 1 to 8 cameras. Generally, when one camera cannot meet the requirements, the system can be equipped with 2 to 8 cameras. The camera can be fixed inside and outside the operating room perpendicular to the roller line, and the setting height is generally 3-5 meters, so that the camera can clearly and completely capture the image of the moving billet. High-definition line scan cameras can also be provided to perform high-precision positioning of each strand of cast products. Line scan cameras are used to support up to 12 strand systems, which ensures that the center of the viewing angle, the billet head, and the fixed-length mark are vertical to improve the cutting and fixed-length accuracy. The technical parameters 1.Numbers of caster stands: maximum 24 strands 2.Cutting method: flame cutting 3.Matching casting speed: ≤6.5m/s 4.Temperature range of billets: 1000℃ 5.Measurement accuracy: ±5mm 6.Cut-to-length range: 3-18m 7.Signal transmission: TCP/IP 8.Number of signals: pre-cut, cut

Respected Sir, We are a solar power system installing concern. We under take various sizes and application styles of projects, no matter how small or big. Below is given a brief set of info related to our areas of interest in various walks of life: • solar powering residential from single room to a full house • from one hour to full day/multiple days of power plans • from upgrading client's existing UPS system into a solar power system • Shops, Factories, Hospital, Market, Street lights, Tube wells, • changing lights systems from energy savers to LED light etc • from kilo-watts to mega-watts projects. Solar System's panels usually last from 5 years to 25 years, and batteries from one year to ten years depending upon quality chosen. Usually a 20,000 Rs per month power bill's house gets eve in 2.5-to-3 years and then for remaining years of component's life the electricity from the installed is free, with minimal of look after. 1. PORT ABLE SOLAR SYSTEM. Dear we can provide you for 5 watts to 500 watts DC Portable / Moveable system. They can run DC fan ,DC blub, USB devise , Mobile Charger and Multiple Charger. 2. FIXED AC SOLAR SYSTEM We can provide complete solar solution for 100 watts to kilo watts @Rs.280/- per watts for running all types of home application for 12 hour back up time, backup time after sunset depends on Batteries bank. Without batteries bank the cost per watt @ Rs.135/- only. 3. SOLAR SYSTEM FOR AIR CONDITIONERS We can install completed AC on solar system just for Rs.50,0000/- for backup time after sunset is 05 hour. 4. SOLAR WATER PUMPS For drinking water, irrigation, farming both in AC and DC system are available in tube well Rs.130.000/- per hp will be charged with complete installation. 5. SOLAR STREET LIGHT we can provide the complete street light solution with UK brand with one year warranty. 6. LED BLUB &TUBE LIGHT we can provide the complete led light solution with one year warranty. 7. SOLAR PANEL We deals and used “A” Grade chinies solar panel with 8 years replacement warranty and 25 years life in both MONO and POLY from 5 Watts to 500 Watts. 8. DRY BATTERIES We deals and use MGE Led Acid batteries high capacity valve sealed battery with 10 years life and deep cycles batteries with low discharge. 9. INVERTERS We deals all type of inverters and all range of inverter from 100 VA to 500 kilo watts from china, German and UK brand as per site and costumer requirements. We are open to your inquiries and proposal against above information. With best regards (KHALIL-UR-REHMAN) 0332-5524998,0322-5307116 E.Mail. emanalternativeenergy@gmail.com

SOLAR POWERED HOME SYSTEM KIT. Hybrid Off-Grid Inverter system is a set of battery charging and discharging control , PV mains switch control and inverter control in one multi-functional integrated system, mainly including PV array, grid, battery, hybrid off-grid inverter and the AC load, PV array absorption of solar radiation and translate into electrical energy to provide power for the entire system, utility power switchover and Inverting control function, also could converting DC power from battery to supply power for AC loads. System Priority mode is PV mode. PV controller and Grid charger achieves the intelligent battery-charging control. The inverter inverts the DC to AC for the load power supplying ;and automatic control the start-stop of Grid charger if needed.Try the best to use the solar energy and the continuous demand of electricity. It�s the preferred solution to solve the public grid or less developed areas residents daily e lectricity. System Includes: Hybrid Inverter including PV Charger,Grid Charger, Inverter and Controller, using a common DC Bus mode, as the output of Battery, PV Charger, Grid Charger and Inverter merge into DC Bus. Meanwhile, DC Bus is battery�s charging current path, and PV charging is priority than Grid charging.

R.O.Tack Water Technology. provides scheduled and/or emergency maintenance and repair service directly to your office or commercial location covering water purification systems of all sizes and uses, no matter the brand or who the original installer was. The knowledge and experience (At R.O.Tack Water Technology) has made us familiar with most systems on the market. From restaurants and department stores to commercial buildings and corporate offices, we (R.O.Tack Water Technology) are able to replace, repair, and restore the working order of your water system. For Business/Office Service and Maintenance Call: (02135050599 Scheduled Maintenance Water purification systems need scheduled maintenance, no matter if you�re on the top floor of an office building or working out of a garage, to ensure maximum performance and efficiency. This is especially true for larger commercial systems and systems in high purity facilities. We will work with you to set up a routine maintenance program that fits your business schedule, including weekends when necessary. Repair Service If your office or business system malfunctions, or if you feel it is not running the way it should, call us at (02135050599 to speak to a dedicated service technician. We will quickly be at your company�s location assessing the system. One R.O.Tack Water Technology�s representative is on call 24/7 to make sure that your commercial system is up and running as soon as possible.

Introduction to School Assignments Management System: School Assignments Management System, in short SAMS, is a web application that will help to manage students' assignments in any school. This software will have the ability to send notifications to teachers and parents via an internal messaging system. This software will have the following 3 access levels. Admin Teacher Student Each level has limited access except Admin. However, Admin can grant some extra permission to any account. For example, Admin can give permission to any teacher to delete students. By default, the teacher will not have permission to delete the user. Software Modules:- Following module is available is School Management System:- 1- Main Dashboard (Whole software’s status at a glance) 2- Student Registration (Manage students data and control the access level of parents and students) 3- Manage Teachers (Manage teachers data and their access levels) 4- Classes Management (Manage classes/sections) 5- Settings Module (Setting of whole software will be there) 6- Logs Module (Logs of every important entries and users activity) 7- Reminders Module (Reminders for important tasks) 8- Notification Module (Notifications for Teachers and Students Alert Box) 9- Assignments (Teacher will upload assignments and after completing that assignment, the students will reupload that assignment) 10- Permission Module (Module for set Permissions for software users) 11- Address book (Contacts of important persons) 12- Profile (update profile of logged in user) Note: Custome Modification can be made Free Installation for first time Free 3 Months updates and support.

Navigating the complexities of today's business environment demands a robust strategy for risk management. Enter the ISO 31000 Risk Management System – a comprehensive solution designed to empower your organization to identify, assess, and manage risks effectively. The ISO 31000 Advantage: In an ever-changing landscape, risks are inevitable. ISO 31000 provides a systematic framework that enables organizations to proactively manage uncertainties and turn potential challenges into opportunities. This globally recognized standard equips businesses with the tools to make informed decisions, enhancing resilience and ensuring a competitive edge. Strategic Risk Navigation: ISO 31000 is not merely a set of guidelines; it's a strategic roadmap. From financial to operational risks, this system offers methodologies to navigate uncertainties with confidence. Implement ISO 31000 to stay ahead in the market, seizing opportunities and staying ahead of the competition. Build Stakeholder Trust: Certification to ISO 31000 demonstrates your commitment to excellence and responsible governance. Bolster confidence among stakeholders, clients, and partners by showcasing your dedication to effective risk management. Enhance your brand reputation and foster trust in your business relationships. Continuous Improvement: Adaptability is key in risk management. ISO 31000 is a dynamic system designed for continuous improvement. Stay abreast of emerging risks, adapt to changing circumstances, and foster a culture of resilience, innovation, and sustainable growth. Seamless Integration: Whether you're a startup or a large enterprise, the ISO 31000 Risk Management System seamlessly integrates with existing management processes. Benefit from a flexible framework tailored to meet your unique business needs. Key Benefits: Systematic identification and prioritization of risks Enhanced decision-making processes Improved operational efficiency Safeguarding reputation and brand value Increased stakeholder confidence Compliance with legal and regulatory requirements Get Certified – Unlock Your Potential! FOR Registration and queries 0321 5714077 , +92-333-5678501 or WhatsApp 0321 5714077 info@icpstudies.com.pk https://icpstudies.com 3rd Floor, Saeed Plaza, Block C G 6/3 Blue Area, Islamabad

A fire alarm system has a number of devices working together to detect and warn people through visual and audio appliances when smoke, fire, carbon monoxide or other emergencies are present. Fire alarms are usually set in fire alarm systems to provide zonal coverage for residences and commercial buildings. https://www.universalfireprotection.com.pk/fire-alarm-system/ https://www.universalfireprotection.com.pk/

Aladin Theatre is working successfully since 15 years. We offer a wide range of services. Some of them are given below. 1. Jumping Bouncers, Inflatable Slides 2. Inflatable Climbing Mount , Inflatable jousted Gladiator Rock'n'Roll 3. Jumping trampoline 4. Candy floss, French Fries 5. Pop Corn, Chocolate Fountain 6. Cartoon characters (can be provided as many as you want) 7. Clown 8. Tall Man 9. Kids Token Rides 10. Face Painting 11. Tattoos (For Kids of slightly higher ages) 12. Balloons Decoration (as many as you want) 13. Magic Show 14. Puppet Show 15. Juggling Show 16. Sound System SP2, SP4 17. Pot Painting 18. Air Gun Shooting 19. Projector 20. Grand Illusions show 21. Air Dancer Note: All Inflatables and Trampolines are newly imported and beautiful more than any other inflatable/Trampoline present in town. Magic Show can be performed in English as well. For any Question , please feel free to contact us. Thank You

ISO Quality Management System 9001 Course Islamabad, Rawalpindi, Lahore, Karachi, Peshawar and Pakistan 03165643400, 03363333792 A Quality Management System (QMS) is a structured framework that an organization implements to ensure the consistent delivery of high-quality products or services. It encompasses the policies, processes, procedures, and resources necessary to achieve and maintain quality standards throughout the organization. These components work together to create a framework that promotes a culture of quality within an organization. By implementing a QMS, organizations can improve customer satisfaction, increase operational efficiency, mitigate risks, and maintain compliance with applicable regulations and standards. A Quality Management System (QMS) is a set of policies, processes, and procedures implemented within an organization to ensure that products or services consistently meet or exceed customer requirements and expectations. The primary objective of a QMS is to achieve and maintain a high level of quality throughout all aspects of the organization's operations. It's important to note that the specific structure and implementation of a QMS may vary depending on the industry, organizational size, and applicable quality standards or regulations. However, the core principles of establishing a systematic approach to quality management remain consistent across different contexts. A Quality Management System (QMS) is a set of policies, procedures, and processes implemented by an organization to ensure that its products or services consistently meet or exceed customer expectations. It provides a framework for managing quality throughout all aspects of the organization's operations and serves as a roadmap for achieving customer satisfaction, continuous improvement, and regulatory compliance. It's important to note that the specific details and implementation of a QMS may vary depending on the industry, organization size, and applicable regulations. Organizations tailor their QMS to meet their specific needs while adhering to the core principles of quality management. A Quality Management System (QMS) is a set of policies, processes, procedures, and resources implemented within an organization to ensure that products or services consistently meet or exceed customer requirements and expectations. It provides a structured framework for managing and improving quality throughout all aspects of the organization. Implementing a QMS can help organizations achieve consistent quality, enhance customer satisfaction, reduce waste and rework, improve efficiency, and drive overall business performance. It provides a systematic and structured approach to managing quality throughout the organization and serves as a foundation for achieving and maintaining industry certifications and standards such as ISO 9001. A Quality Management System (QMS) is a structured framework that an organization adopts to effectively manage and control its quality-related processes, procedures, and activities. It is designed to ensure that products or services consistently meet or exceed customer expectations and comply with applicable regulations and standards. An effective QMS enables organizations to streamline processes, reduce waste, improve customer satisfaction, achieve regulatory compliance, and drive overall business performance. It provides a framework for consistently delivering high-quality products or services while fostering a culture of excellence and continuous improvement. A Quality Management System (QMS) is a formalized framework and set of processes designed to ensure that an organization consistently meets or exceeds customer expectations by delivering products or services of the highest quality. It encompasses the policies, procedures, and practices employed by an organization to manage and control quality throughout all stages of its operations. The implementation of a QMS is typically based on recognized quality standards such as ISO 9001, which provides a globally accepted framework for quality management. By following a QMS, organizations can streamline their processes, minimize defects and waste, enhance customer satisfaction, and achieve their quality objectives consistently. A comprehensive QMS typically includes the following components: 1. Quality Policy: A statement of the organization's commitment to quality, outlining its objectives and guiding principles. 2. Quality Planning: The process of setting quality objectives, determining the necessary resources, and developing plans to achieve and maintain quality standards. 3. Quality Control: The activities and techniques used to monitor and verify that products or services meet specified requirements. This involves inspecting, testing, and measuring against predefined criteria. 4. Quality Assurance: The systematic processes and activities designed to provide confidence that quality requirements are being fulfilled. It includes the establishment of quality standards, audits, and documentation of procedures. 5. Document Control: The management of documents and records related to the QMS, ensuring their accuracy, accessibility, and proper version control. 6. Training and Competence: The identification of necessary skills and knowledge, and the provision of training and development programs to ensure employees are competent to perform their assigned tasks. 7. Supplier Management: The evaluation and selection of suppliers based on their ability to meet quality requirements. It includes establishing supplier agreements, monitoring their performance, and addressing any quality issues. 8. Corrective and Preventive Actions: The process of identifying and addressing non-conformities and taking appropriate actions to prevent their recurrence. This involves investigating root causes, implementing corrective measures, and tracking their effectiveness. 9. Continual Improvement: The ongoing effort to enhance the effectiveness and efficiency of the QMS. It involves collecting and analyzing data, identifying areas for improvement, and implementing changes to drive quality enhancement. 10. Management Review: Regular reviews conducted by top management to evaluate the performance of the QMS, identify areas for improvement, and make strategic decisions to ensure its effectiveness.

Overview The mold is a device that shapes the cast product in continuous steel casting, and it is also the core equipment and key technology of continuous casting machine. The main function of the mould oscillation deflection detection instrument is to detect the the mould oscillation table’s oscillation frequency, amplitude, deflection rate, phase, oscillation trajectory curve, etc. Through the detection and adjustment of the detection instrument, the mold moves along the outer arc of the continuous casting machine according to the set amplitude, frequency and waveform deflection characteristics. The actual oscillation parameters of the mold oscillation table during the production process and the process parameters of the cast products cannot be effectively known without the data detection of the mold deflection detection instrument, so that the operator cannot adjust the mould’s production process parameters in real time according to the real-time situation of the on-site production. The continuous casting mold deflection detection instrument independently developed by our company is suitable for various molds such as slab, square billet, round billet and shaped billet. The system obtains the process parameters such as actual oscillation holographic parameters and negative slip amount of the oscillation table by effectively detecting the movement of the mold. The technicians can formulate the control strategy of the mould according to these actual parameters, and improve the output and quality of the product within a safe and reliable range. The structure of the instrument Continuous casting mold oscillation and deflection detection instrument is mainly composed of sensor system, sensor signal conditioning circuit, power supply circuit, synchronous data acquisition module, communication cable, and software data analysis system. There are three axial acceleration sensors installed in the mold oscillation and deflection detection instrument, one of which is to detect the vertical oscillation signal (Y axis), and the other two are to detect the horizontal oscillation signal (X and Z axis). The signal obtained by the sensor is processed by the preprocessor and the preprocessing module. The oscillation signal and sensor status signal will be filtered and normalized, sent to the synchronous data collector for digitization and feature extraction, and the data is analyzed and processed by the master computer software to obtain various oscillation parameters and process parameters required by users. The functions of the system 1. Adopting mould oscillation X/Y/Z three-dimensional data acquisition, using high-precision sensor system and high-sensitivity axial accelerometer, comprehensive detection of equipment oscillation state, including: 1) Detect the oscillation frequency of the mold oscillation table 2) Detect the amplitude of the mold oscillation table 3) Detect the deflection rate of oscillation 4) Detect the lateral deflection, longitudinal deflection, phase, and phase difference of the mold oscillation table 5) Three-dimensional display of the oscillation trajectory, and the oscillation table trajectory can be viewed from 6 sides of the oscillation table (X-Y, X-Z, Z-Y) 2. The software system adopts the design of man-machine interactive graphic interface, which can display the mold oscillation state in real time. The software functions include: 1) Real-time data curve display: oscillation waveform, oscillation frequency, signal superposition analysis 2) Single-axis curve display, multi-axis curve display, amplitude, acceleration, three-dimensional graph 3) View historical curve 4) Generate test report 5) Give a warning prompt 6) Spectrum analysis function 7) Long-term storage of data 3. Portable measurement method, which can provide handheld detection equipment with wireless remote transmission, and the operation is simple. 4. Provide an overview of inspection parameters under the full screen, displaying all data including oscillation parameters and process parameters. At the same time, the calculation and display of the oscillation spectrum is completed in real time, which is used to evaluate the frame loss of the waveform , and to determine whether there is a problem with the installation of the oscillation device. 5. Alarm management. Record each alarm data under real-time alarm conditions to analyze the cause of the alarm and evaluate the impact of the alarm on production. 6. Parameter setting. Users can set the ideal oscillation value and normal working range of various steels online. We also can set the alarm limit, and the storage time of the database etc. 7. After charging the device once, it can work continuously for more than four hours. 8. Integrate embedded processing equipment to realize data collection, display, analysis, reporting and other functions. 9. According to the mold characteristics and user requirements, it can be flexibly configured, wich is suitable for all types of molds such as square billets, slabs, round billets and other mold oscillation tables. 10. Support wired and wireless data transmission functions, easy to use. 11. Use the laptop to receive the collected data, can be used for the operation test on site, and can analyze and process the data conveniently. The features of the system 1. The actual oscillation state replaces the ideal oscillation state. The actual oscillation state of the table is used to formulate a control strategy, so that the oscillation table can be used to produce products with more accurate oscillation. 2. Convenient detection method. The equipment can be used for on-site inspection at any time, and the production site can grasp the operating status of the on-site equipment in time, so that we can make production adjustments to the equipment at any time. 3. Efficient working methods and processing platforms. The high-integration equipment developed by embedded technology can work in high temperature and harsh environment. This system can comprehensively detect XYZ three-axis data, and realize real-time data analysis and processing with high-speed data operation and processing platform. 4. Powerful database function. The database adopts the mode of computer automatic management and operator's manual assistance management, and there are tables for recording historical data and alarm data and working parameter setting table of monitoring system inside the database. By adjusting the output range, the best output effect can be obtained.

An auto electrician performs routine maintenance, services, inspections, repairs, and replacements on the electrical and electronic components of cars. A competent and dependable car electrician should be able to install electrical installations and network equipment on a car and identify and fix installation and network equipment problems using the drawings as a guide. This craftsman should also do a quality check on the finished electrical work while keeping in mind the laws and regulations. The three-month auto electrician training offered by Skill Center Pakistan is a component of its trade programs. Each student will be able to identify the different electrical symbols and describe how the electrical installations are set up on a vehicle after finishing this course. They will also be able to identify the different types and components of electrical installations. Best EFI Auto Electrician Course In Mansehra Today’s Automotive technology is rapidly changing from mechanical to electronics, from analogue to digital and from carburetor to electronic fuel injectors. due to the competition and pressures to produce more efficient and economical vehicle’s electronic systems which are not only efficient but also adhere to very significantly controlled toxic emissions. Demand for the trained Auto Electricians is rising day by day. Because of more and more automobiles on the roads, and more important are the Hi-Tech changes especially as hybrid vehicles, advanced electronic ignition systems and many other drive assist programming Auto Electrician Auto Electricians install, maintain, identify faults and repair electrical wiring and computer-based equipment in motor vehicles and related equipment, such as caravans, trailers, earth moving equipment, mining equipment, marine applications and agricultural equipment.An Auto Electrician is a professional who specializes in the electrical systems of vehicles. This includes everything from the battery and starter motor to the alternator, lights, and electronic control modules. With the increasing use of electronics in vehicles, the demand for qualified auto electricians is also increasing. An Auto Electrician course is designed to provide students with the knowledge and skills necessary to diagnose and repair electrical faults in vehicles. Professional Training Course EFI Auto Electrician In Mansehra EFI Auto Electrician Course Outline Here is an example of a bulleted course plan for electronic fuel injection (EFI) auto electrician. introduction to the EFI system components understanding engine management systems EFI system diagnostic instruments and apparatus interpreting and analyzing wiring diagrams and schematics identifying and resolving common EFI system problems knowing how fuel injection and management systems work Understanding ignition systems and spark management Knowing the sensors and actuators utilized in EFI systems programming and understanding computer-controlled systems advanced EFI system diagnostic methods upkeep and repair of EFI systems precautions and safety measures while working with EFI systems introduction to electric and hybrid car technologies (optional) Practical experience with EFI systems and diagnostic equipment Assessment or final project on diagnosing and fixing EFI systems. No 1 EFI Auto Electrician Course In Mansehra Along with teaching students how to connect electrical and electronic devices to installations, the school also teaches them about the many types and applications of the tools and equipment required to construct and set up electrical installations and network hardware. The students will be taught how to set up and connect electric and electronic equipment on the installations, verify the installations for regularity, and utilize the appropriate tools in addition to receiving a theoretical explanation of these operations. https://www.icollegete.com/course/diploma-efi-auto-electrician-course-in-rawalpindi-islamabad-pakistan/ https://ictepakistan.com/diploma-in-efi-auto-electrician/ https://icollegete.com.pk/efi-auto-electrician-course-in-peshawar/ Office # 27, Second Floor, Maryam Shadi Hall Plaza (Airies Plaza), Shamsabad, Murree Road, Rawalpindi, Pakistan 46000. Email : info@icollegete.com Contact : 051-6122937, 0311-5193625, 0092-335-4176949One Year Diploma In EFI Auto Electrician Course In Kohat

Many people are afraid to start a blog and that is the reason why a dedicated team created the 2AM Traffic Blogging System in order to help them achieve this goal. Until quite recently, blog creation was out of reach to some people. Today however, everybody can have a blog since content publishing system has made it easy for them to start a blog. Not only can a blog be used as a personal diary but it can also be used to make money online. Still, people are afraid to start a blog as they don�t know where to start, how to find good quality content and how to market their blog. 2AM Traffic Blogging system was created to help those people. This amazing powerful system filled with dozens of training videos will teach you step-by-step how to set up your blog and deliver quality content for your blog. It provides $350 in high quality advertising credits and weekly webinars so as to ensure your success. The 2AM Traffic Blogging system also provides strategies for you to grab a top page rank in Google in record breaking time. 2AM Traffic is really a pillar blog which allows you to gain knowledge where others fail. It is not hard to set up blog and making money online. The2AM Traffic Blogging system proves it. Stop looking at others with Envy. You can be successful online; you have been given the chance, right now. Have confidence in yourself. Just be an Action Taker. Create your FREE ACCOUNT and START A BLOG that will lead you to the pinnacle of success.

ICTE International College of Technical Education Pvt. Ltd Head Office : Office # 27, Second Floor, Maryam Shadi Hall Plaza (Airies Plaza), Shamsabad, Murree Road, Rawalpindi, Pakistan 46000. Email : info@icollegete.com Contact : 051-6122937, 0311-5193625, 0092-335-4176949 Auto Electricians install, maintain, identify faults and repair electrical wiring and computer-based equipment in motor vehicles and related equipment, such as caravans, trailers, earthmoving equipment, mining equipment, marine applications and agricultural equipment.ICTE design Diploma in EFI Auto Electrician course according to the requirements of market demand on international standards. Our professional Trainers train students in all fields of Auto Electrician and EFI Technology. After the completion of Diploma in EFI Auto Electrician course students can do job as auto electrician and EFI technician in local market and abroad, also can start their own business with full confidence. Our trainers help them in job placement and also provide assistance to start business. ICTE fully equipped with apparatus and tools, students can practice freely to enhance their practical knowledge. We focus on 80% on practical and 20% theory. We provide practical Training in EFI Auto Electrician Workshop in Last Month.Auto Electrician is there to service, maintain, check up, repair, and change electric and electronic devices and systems on the vehicle. A good and reliable auto electrician should know how to set up electric installations and network equipment on the cat based on the sketches; how to detect and remove installation and network equipment malfunctions.Also, this tradesman should perform quality control for the electrical work performed, considering the norms and regulations.Within the auto electric trade courses, International College of Technical Education has a six-month auto electrician course to offer. Having finished this course, each student will be able to identify the types and elements of electric installations, and network equipment; to differ the electric symbols, and explain how the electric installations are set up on a vehicle.The school also incorporates introducing the students to the procedures and rules of connecting electric and electronic devices to the installations, as well as to differ the types and uses of the tools, and devices which build and set up the electric installation and network equipment. Apart from theoretical representation of these procedures, the students will also be trained to set up and connect electric and electronic devices on the installations, to check the regularity of the installations, and use the appropriate tools.The auto electrician course in International College of Technical Education offers you the chance to learn about terms such as ECU, and CPU, learn what system sensors are, and explain how they work (coolant fluid temperature sensor, air temperature and flow sensor).In our school you will learn what an encoder is, how it functions, what is Hall effect, what is a “Knock” sensor, and what is the purpose of the sensor for the car speed.This training for auto electrician is the best and the most comprehensive possible offer.It is a reliable and high-quality course to prepare you for this trade, highly in demand.The practice within this training is certainly the most important segment. You can have the practice in a shop that ICTE Institute cooperates with, and it is not included in the course fee. Within the course fee we have included the textbook, the final exams, and a certified diploma.An electrician is a tradesperson specializing in electrical wiring of buildings, stationary machines, and related equipment. Electricians may be employed in the installation of new electrical components or the maintenance and repair of existing electrical infrastructure. Electricians may also specialize in wiring ships, airplanes, and other mobile platforms, as well as data and cable. Automotive electronics are any electrically-generated systems used in road vehicles, such as: carputers, telematics, in-car entertainment systems, etc. Automotive electronics originated from the need to controll engines. The first electronic pieces were used to control engine functions and were referred to as engine control units (ECU). As electronic controls began to be used for more automotive applications, the acronym ECU took on the more general meaning of "electronic control unit", and then specific ECU's were developed. Now, ECU's are modular. Two types include engine control modules (ECM) or transmission control modules (TCM). A modern car may have up to 100 ECU's and a commercial vehicle up to 40. Automobile engineering, along with aerospace engineering and marine engineering, is a branch of vehicle engineering, incorporating elements of mechanical, electrical, electronic, software and safety engineering as applied to the design, manufacture and operation of motorcycles, automobiles and trucks and their respective engineering subsystems. It also includes modification of vehicles. Manufacturing domain deals with the creation and assembling the whole parts of automobiles is also included in it.The automotive engineering field is research -intensive and involves direct application of mathematical models and formulas. The study of automotive engineering is to design, develop, fabricate, and testing vehicles or vehicle components from the concept stage to production stage. Production, development, and manufacturing are the three major functions in this field. Automobile Engineering is mainly divided into three streams such as production or design engineering focuses on design components, testing of parts, co-ordinating tests, and system of a vehicle. Auto Electrician Course Content: Tools Special purpose tools Measureing tools Fastening devices and tube fittings Electrical fundamentals Cranking and charging systems Electrical circuits

Auto Electricians install, maintain, identify faults and repair electrical wiring and computer-based equipment in motor vehicles and related equipment, such as caravans, trailers, earthmoving equipment, mining equipment, marine applications and agricultural equipment.CNEX design Diploma in EFI Auto Electrician course according to the requirements of market demand on international standards. Our professional Trainers train students in all fields of Auto Electrician and EFI Technology. After the completion of Diploma in EFI Auto Electrician course students can do job as auto electrician and EFI technician in local market and abroad, also can start their own business with full confidence. Our trainers help them in job placement and also provide assistance to start business. CNEX fully equipped with apparatus and tools, students can practice freely to enhance their practical knowledge. We focus on 80% on practical and 20% theory. We provide practical Training in EFI Auto Electrician Workshop in Last Month.Auto Electrician is there to service, maintain, check up, repair, and change electric and electronic devices and systems on the vehicle. A good and reliable auto electrician should know how to set up electric installations and network equipment on the cat based on the sketches; how to detect and remove installation and network equipment malfunctions.Also, this tradesman should perform quality control for the electrical work performed, considering the norms and regulations.Within the auto electric trade courses, International College of Technical Education has a six-month auto electrician course to offer. Having finished this course, each student will be able to identify the types and elements of electric installations, and network equipment; to differ the electric symbols, and explain how the electric installations are set up on a vehicle.The school also incorporates introducing the students to the procedures and rules of connecting electric and electronic devices to the installations, as well as to differ the types and uses of the tools, and devices which build and set up the electric installation and network equipment. Apart from theoretical representation of these procedures, the students will also be trained to set up and connect electric and electronic devices on the installations, to check the regularity of the installations, and use the appropriate tools.The auto electrician course in International College of Technical Education offers you the chance to learn about terms such as ECU, and CPU, learn what system sensors are, and explain how they work (coolant fluid temperature sensor, air temperature and flow sensor).In our school you will learn what an encoder is, how it functions, what is Hall effect, what is a “Knock” sensor, and what is the purpose of the sensor for the car speed.This training for auto electrician is the best and the most comprehensive possible offer.It is a reliable and high-quality course to prepare you for this trade, highly in demand.The practice within this training is certainly the most important segment. You can have the practice in a shop that ICTE Institute cooperates with, and it is not included in the course fee. Within the course fee we have included the textbook, the final exams, and a certified diploma.An electrician is a tradesperson specializing in electrical wiring of buildings, stationary machines, and related equipment. Electricians may be employed in the installation of new electrical components or the maintenance and repair of existing electrical infrastructure. Electricians may also specialize in wiring ships, airplanes, and other mobile platforms, as well as data and cable. Automotive electronics are any electrically-generated systems used in road vehicles, such as: carputers, telematics, in-car entertainment systems, etc. Automotive electronics originated from the need to controll engines. The first electronic pieces were used to control engine functions and were referred to as engine control units (ECU). As electronic controls began to be used for more automotive applications, the acronym ECU took on the more general meaning of "electronic control unit", and then specific ECU's were developed. Now, ECU's are modular. Two types include engine control modules (ECM) or transmission control modules (TCM). A modern car may have up to 100 ECU's and a commercial vehicle up to 40. Automobile engineering, along with aerospace engineering and marine engineering, is a branch of vehicle engineering, incorporating elements of mechanical, electrical, electronic, software and safety engineering as applied to the design, manufacture and operation of motorcycles, automobiles and trucks and their respective engineering subsystems. It also includes modification of vehicles. Manufacturing domain deals with the creation and assembling the whole parts of automobiles is also included in it.The automotive engineering field is research -intensive and involves direct application of mathematical models and formulas. The study of automotive engineering is to design, develop, fabricate, and testing vehicles or vehicle components from the concept stage to production stage. Production, development, and manufacturing are the three major functions in this field. Automobile Engineering is mainly divided into three streams such as production or design engineering focuses on design components, testing of parts, co-ordinating tests, and system of a vehicle. Auto Electrician Course Content: Tools Special purpose tools Measureing tools Fastening devices and tube fittings Electrical fundamentals Cranking and charging systems Electrical circuits

Today however, everybody can have a blog since content publishing system has made it easy for them to start a blog. Not only can a blog be used as a personal diary but it can also be used to make money online. Still, people are afraid to start a blog as they don�t know where to start, how to find good quality content and how to market their blog. 2AM Traffic Blogging system was created to help those people. This amazing powerful system filled with dozens of training videos will teach you step-by-step how to set up your blog and deliver quality content for your blog. It provides $350 in high quality advertising credits and weekly webinars so as to ensure your success. The 2AM Traffic Blogging system also provides strategies for you to grab a top page rank in Google in record breaking time. 2AM Traffic is really a pillar blog which allows you to gain knowledge where others fail. It is not hard to set up blog and making money online. The2AM Traffic Blogging system proves it. Stop looking at others with Envy. You can be successful online; you have been given the chance, right now.

HACCP Food Safety Level 4 Train the Trainer Course in Kohat ************For Registration & Information****** Please Call: 0331-5999937, 0321-5056755?Whatsapp: 0092-331-5999937? Email: info@iitpakistan.com.pk In-house HACCP courses for food manufacturers are our speciality** Entry Requirements Participants should ideally hold the RSPH Level 3 Award in Understanding how to Develop a HACCP Plan, or an equivalent qualification, and possess a good working knowledge of their industry sector before embarking on this Advanced HACCP training course. Pre Course Assignment Prior to the course we will set a short pre-course assignment to help candidates achieve the standard required for this advanced level course. Course Structure & Content Section 1 Benefits and Limitations of HACCP Current Status of HACCP Legislative Aspects of HACCP HACCP Internationally Pre-requisite Programmes Planning and Designing an Effective HACCP System Section 2 Securing Commitment Establishing and Leading a HACCP Team Managing the HACCP Project Effective Implementation and Potential Barriers Section 3 Validating the HACCP Plan Verifying the HACCP System Verification Methods Maintaining & Updating the System International UK Certificate Fee 45000. An advanced course focusing on the management aspects of HACCP. Course Summary This 4-day Level 4 HACCP training course leads to the RSPH Level 4 Award in Managing the HACCP System. This course is ideal for HACCP Team Leaders, Technical Managers, Consultants and Enforcers. The Advanced HACCP course takes HACCP training to a new level and covers the longer term, and management issues of HACCP which are essential for the effective functioning of the system. With many of the major retailers now requiring their suppliers to ensure that managers and HACCP Team Leaders to have an Advanced HACCP qualification, this Level 4 course is ideal to ensure you meet these exacting standards. **In-house HACCP courses for food manufacturers are our speciality** Entry Requirements Participants should ideally hold the RSPH Level 3 Award in Understanding how to Develop a HACCP Plan, or an equivalent qualification, and possess a good working knowledge of their industry sector before embarking on this Advanced HACCP training course. Pre Course Assignment Prior to the course we will set a short pre-course assignment to help candidates achieve the standard required for this advanced level course

This place offers the best and most comprehensive training for car electricians. Thanks to your great and comprehensive education, you will be well-prepared for this sought-after position. The practice phase of this program is the most crucial component. Although it is not part of the course fee, the practice can be completed in a store that partners with Skill Center Pakistan. The content, the final tests, and a recognized certificate are all included in the course fee. An auto electrician performs routine maintenance, services, inspections, repairs, and replacements on the electrical and electronic components of cars. A capable and trustworthy automotive electrician should be able to install electrical installations and network equipment on a car and use the drawings as a reference to locate and rectify installation and network equipment issues. Along with doing a quality check on the completed electrical work, this craftsperson must also be aware of all applicable rules and regulations. One of the ICTE College of Technology trade programs is the three-month auto electrician program. Each student will be able to identify the different electrical symbols and describe how the electrical installations are set up on a vehicle after finishing this course. Also, they’ll be able to recognize the multiple electrical installation styles and parts. Students are taught how to connect electrical and electronic devices to installations at the school, as well as the many types and applications of the tools and equipment used to Create and install the necessary electrical and network infrastructure. Together with theoretical explanations of these steps, the students will also receive instructions on how to set up and connect electrical and electronic equipment on the installations. EFI Auto Electrician Course Outline Here is an example of a bulleted course plan for electronic fuel injection (EFI) auto electrician. introduction to the EFI system components understanding engine management systems EFI system diagnostic instruments and apparatus interpreting and analyzing wiring diagrams and schematics identifying and resolving common EFI system problems knowing how fuel injection and management systems work Understanding ignition systems and spark management Knowing the sensors and actuators utilized in EFI systems programming and understanding computer-controlled systems advanced EFI system diagnostic methods upkeep and repair of EFI systems precautions and safety measures while working with EFI systems introduction to electric and hybrid car technologies (optional) Practical experience with EFI systems and diagnostic equipment Assessment or final project on diagnosing and fixing EFI systems. http://www.icollegete.com/ International College of Technical Education. Main office: Office No. 27, Second Floor, Maryam Shadi Hall Plaza (Airies Plaza), Shamsabad, Murree Road, Rawalpindi, Pakistan 46,000. Email: info@icollegete.com Contact: 051-6122937, 0311-5193625, 0092-335-4176949 http://www.icollegete.com/course/efi-auto-electrician-course-in-rawalpindi-pakistan/

Total Quality Management Course in Kashmir Ajk Advance TQM (Total Quality Management) Course In Bagh We are Offering Total quality management Course in INTERNATIONAL COLLEGE OF TECHNICAL EDUCATION .Total quality management is used to streamline supply chain management, improve customer service, and ensure that employees are properly trained. The focus is to improve the quality of an organization's outputs, including goods and services, through the continual improvement of internal practices. Advance TQM (Total Quality Management) Course In Bagh Total Quality Management Course in Kashmir Ajk Course Description This course emphasizes the main concepts and tools of Total Quality Management (TQM) as developed by W. Edwards Deming, Joseph Juran, Philip Crosby, and others. The current course addresses the subjects of Continuous quality improvement, total quality control, cost of quality, competitive advantage, problem solving, and Statistical Process Control (SPC). Additional, the requirements of adopting and applying TQM Thought. Total quality management (TQM) is a customer-oriented process that aims for continuous improvement of business operations. It ensures that all employees and their work align to common goals of improving product or service quality, showing continuous enhancement and improvement through continuous feedback. Strong support and commitment from the management is a key factor and principle that could influence the success of implementing a TQM system in the organisation. COURSE CONTENT Critical principles and procedures of quality management in a competitive global environment contemporary definitions of quality construction quality Product quality Process quality Quality economics Quality philosophies Planning, organizing and controlling for quality Human resource strategies; QA and QC tools Advance TQM (Total Quality Management) Course In Bagh Total Quality Management Course in Kashmir Ajk Course Objectives The main objective of this Total Quality Management (TQM) Certification Course is to empower professionals with— detailed knowledge and information about total quality management the required skill, understanding and confidence to partake in and play a significant role in the implementation of a total quality management system in the organisation, in turn supporting career growth and progression the necessary confidence and knowledge to train other professionals on total quality management the ability and knowledge to contribute to organisational growth and development by delivering better quality, following the requirements of clients the confidence, experience and understanding to check existing processes and procedures followed within the organisation for adherence to standards set and suggesting changes if required the required skillset and capabilities to work with advanced tools and concepts to set up total quality management systems within the organisation the knowledge, confidence and experience to work in any organisation or industry in quality management related roles, thereby increasing avenues for career growth and progression Who Should Attend? Operations managers responsible for managing projects and operations within the organisation Quality managers responsible for ensuring adherence to quality standards in terms of operations as well as product and/or service delivery Human resource professionals and other stakeholders involved in building a quality-sensitive culture Senior leaders of an organisation who need to understand the importance of training employees on total quality management Internal and external auditors who need to ensure that the systems set up for quality management are delivering the desired results Any other professional who would like to know more about total quality management Learning Outcomes Outline the evolution of the TQM philosophy. Evaluate, define, and document a process with the aid of control charting and statistics. Demonstrate the use of attribute and variable control charting and recognizing out-of-control patterns. Use design of experiments, process capability studies, and other management. Advance TQM (Total Quality Management) Course In Bagh Total Quality Management Course in Kashmir Ajk https://www.icollegete.com/diploma-in-quality-control-rawalpindi-islamabad-pakistan/ https://www.icollegete.com/quality-control-qa-qc-course-in-bagh-ajk/ Address Detail: ICTE International College of Technical Education Pvt. Ltd Head Office : Office # 27, Second Floor, Maryam Shadi Hall Plaza (Airies Plaza), Shamsabad, Murree Road, Rawalpindi, Pakistan 46000. For Registration: Email : info@icollegete.com Contact : 051-6122937, 0311-5193625, 0092-335-4176949 Websites:https://www.icollegete.com/ , https://ictepakistan.com/ , https://icollegete.com.pk/

First of all nebosh igc course in rawalpindi has been designed to provide the student with core knowledge of Safety. In Occupational Safety , Nebosh plays a key role for finding a job. In Occupational Safety , Nebosh plays a key role for finding a job. safety cultureis an important topic, but time consuming to inspect (because of the samplerequired) and difficult to tackle. It is recommended that it is only be takenon where there is good reason to believe that there is a significant issue toaddress, such as a poor safety record over a period, and where the company islikely to be receptive to advice. An organization’s culture can have as big aninfluence on safety outcomes as the safety management system. ‘Safety culture’is a subset of the overall company culture (and is defined in the box on theright). Many companies talk about ‘safety culture’ when referring to theinclination of their employees to comply with rules or act safety or unsafely.However we find that the culture and style of management is even moresignificant, for example a natural, unconscious bias for production oversafety, or a tendency to focusing on the short-term and being highly reactive. Symptoms of poor cultural factors can include: · Widespread, routine procedural violations. · Failure to comply with the company’s own SMS(although either of these can also be due to poor procedure design). · Management decisions that appear consistently toput production or cost before safety. In inspection, it is possible to gatherevidence about a company’s culture, although this requires interviewing asuitably representative sample of people from all levels. Model forOrganisational and Safety Culture Cultures areusually defined as shared values, attitudes and behavior of certain group. Thecore of culture is inside person’s mind. Only through behavior or other actionsof persons the culture becomes visible and shareable. Cultural art effects andall other perceptible signs of culture are formed through action. From thisperspective culture requires functionality. It does not exist nor spreadwithout activity of individuals. In systems theory there is a methodologicaldistinction between theoretical system and empirical system. Theoretical system“is a complex of concepts, suppositions, and propositions having both logicalintegration and empirical reference”. Empirical system is “a set of phenomenain the observable world that is amenable to description and analysis by meansof a theoretical system”. However, in cultural context, theoretical modelsusually describe only properties of the empirical system. Usually thefunctionality of the culture is left undefined. Therefore theoretical modelsmay have flaws in their ability to describe the functionality of the culture,which is essential part of the culture. Introduction Most organizational culture models are basedon the shared mental models of individuals These internal psychological modelsare highly personal. Some of these models are used as guidelines with which oneoperates in the world. Thoughts, values and other cognitions need some kind ofaction to be exposed to other people. As long as they are solely insidepeoples’ minds they cannot be shared nor be confirmed. Gherardi and Nicolinihave described safety as “aspect of practice” All human behavior is considered asan action and these actions include talking, writing and all other sociallyinteractive methods of communication. As far as we know, in the literature oforganizational culture, this issue of culture’s method of action has been leftundefined. We have developed a meta-model, which describes the person –sociotechnical system interaction. 1. Functionalmodel The functionalmeta-model is based on the systems point of view. Both person and organizationare modeled as systems. The systems theory models real world entities as technicalsystems. Systems theory states several properties a system must have, but weconcentrate to just one of those, namely openness. The openness of a systemmeans that a system has means of interaction with its environment. Environmentis defined as everything that does not belong to the system itself, but hassome kind of effect to the system. According to Buckley the interchange isessential factor underlying the system’s viability. Basically the interactionwith environment means some kind of flow in and out of the system. The majortypes of system flows are materials, energy and information . When the flow isentering the system it is called input or originally inflow and when thedirection is out from the system it is output (outflow). The input and outputprovide means for the system to interact with its environment. The action ofprocessing the input is called throughput. The system causes its own behavioror output. Same input in different systems is likely to produce differentoutput. The system can also evaluate the output flows and get valuable feedbackfrom its performance. Input, output, processing and feedback are the keyelements we use in our models of person and organization as open systems.Another important issue is the level of analysis concerning organization andperson. When studying the organization, the level is macro, but when theresearch subject is an individual, the level is micro. When both person and organizationare studied together and in same model, the model unavoidably has to includeboth micro and macro levels of analysis. This is important issue, since theperson modeled in a socio-technical system is acting only in certain roles. Inthe organization level there are no personal issues concerning individuals.Basically, this model provides means for studying the personal issues in the organizationallevel. Figure 1: Organizationand person interacting with each other. Figure 1 showshow organization and person are interacting. All persons, regardless theirstatus and role in the organization, can gain information from the organizationonly through their sensory system. In this model all observable signs andactions from the organization are treated as events. They are inputs for theperson, with which the person can detect the status of the organization. Personprocesses the input with all previous knowledge of the system using herpersonal mental models and then she may perform some action as an output. Allinputs do not trigger output, but they all affect person’s mental models. Organizationrelated actions of a persons are considered as inputs of the organization. Theactions include all means how persons can affect the organization. 2. Otherorganizational and safety culture models In thissection we compare three different organizational and safety culture models.Schein’s organizational levels of culture provides the core of all organizationaland safety culture models share: underlying assumptions as the basis of cultureand its visible manifestations are espoused beliefs and values and art effects .Cooper has introduced a safety culture model , which is based on Bandurareciprocal determinism model (1986). Cooper’s model unites psychological,situational and behavioral factors.

The mobile counter promotion table is made for promotions, POS activities, trade shows, special events etc. set up Promotion table is easy to set up. Put bottom shelf on the floor, add the panel, the shelf and the counter top. The header consist of two 3-part poles and a header board. about promotion table This light weight promorion counter / desk is set up in a few minutes without any tools. Measurements WxDxH 81 x 47 x 85,5 cm / 31.9“x 18.5“x 33.7“ – including the header height 206 cm / 81.1“ – weight incl. transport bag 11,5 kg / 25.6“. Promotion table, a light weight promotion counter is delivered in a transport bag, singly packed in a cardboard box. All system parts are available as spare parts. You will find set up instructions, templates, printing templates, and brochures in download section. To see the promotion table price list (PL-014B), please register

Auto Electricians install, maintain, identify faults and repair electrical wiring and computer-based equipment in motor vehicles and related equipment, such as caravans, trailers, earthmoving equipment, mining equipment, marine applications and agricultural equipment.An electrician is a tradesperson specializing in electrical wiring of buildings, stationary machines, and related equipment. Electricians may be employed in the installation of new electrical components or the maintenance and repair of existing electrical infrastructure. Electricians may also specialize in wiring ships, airplanes, and other mobile platforms, as well as data and cable. Automotive electronics are any electrically-generated systems used in road vehicles, such as: carputers, telematics, in-car entertainment systems, etc. Automotive electronics originated from the need to controll engines. The first electronic pieces were used to control engine functions and were referred to as engine control units (ECU). As electronic controls began to be used for more automotive applications, the acronym ECU took on the more general meaning of "electronic control unit", and then specific ECU's were developed. Now, ECU's are modular. Two types include engine control modules (ECM) or transmission control modules (TCM). A modern car may have up to 100 ECU's and a commercial vehicle up to 40. Automobile engineering, along with aerospace engineering and marine engineering, is a branch of vehicle engineering, incorporating elements of mechanical, electrical, electronic, software and safety engineering as applied to the design, manufacture and operation of motorcycles, automobiles and trucks and their respective engineering subsystems. It also includes modification of vehicles. Manufacturing domain deals with the creation and assembling the whole parts of automobiles is also included in it.The automotive engineering field is research -intensive and involves direct application of mathematical models and formulas. The study of automotive engineering is to design, develop, fabricate, and testing vehicles or vehicle components from the concept stage to production stage. Production, development, and manufacturing are the three major functions in this field. Automobile Engineering is mainly divided into three streams such as production or design engineering focuses on design components, testing of parts, co-ordinating tests, and system of a vehicle.Auto Electrician is there to service, maintain, check up, repair, and change electric and electronic devices and systems on the vehicle. A good and reliable auto electrician should know how to set up electric installations and network equipment on the cat based on the sketches; how to detect and remove installation and network equipment malfunctions.Also, this tradesman should perform quality control for the electrical work performed, considering the norms and regulations.Within the auto electric trade courses, International College of Technical Education has a six-month auto electrician course to offer. Having finished this course, each student will be able to identify the types and elements of electric installations, and network equipment; to differ the electric symbols, and explain how the electric installations are set up on a vehicle.The school also incorporates introducing the students to the procedures and rules of connecting electric and electronic devices to the installations, as well as to differ the types and uses of the tools, and devices which build and set up the electric installation and network equipment. Apart from theoretical representation of these procedures, the students will also be trained to set up and connect electric and electronic devices on the installations, to check the regularity of the installations, and use the appropriate tools. Diploma in EFI Hybrid Car Technology Course in Bagh, Muzaffarabad AJK http://www.icollegete.com/course/diploma-in-efi-hybrid-car-technology-course-in-bagh-muzaffarabad-ajk/ Diploma in Auto Efi Electrician course in Rawalpindi Pakistan http://www.icollegete.com/course/diploma-in-auto-efi-electrician-course-in-rawalpindi-pakistan/ EFI Auto Electrician Diploma Course in Rawalpindi http://www.icollegete.com/course/efi-auto-electrician-diploma-course-in-rawalpindi/ Electronic Fuel Injection EFI Course in Pakistan http://www.icollegete.com/course/electronic-fuel-injection-efi-course-in-pakistan/ EFI Auto Electrician Diploma Course in Rawalpindi Islamabad Pakistan http://www.icollegete.com/course/efi-auto-electrician-diploma-course-in-rawalpindi-islamabad-pakistan/ Efi Auto Electrician Course in Rawalpindi http://www.icollegete.com/course/efi-auto-electrician-course-in-rawalpindi/ Auto Mechanical Course in Rawalpindi http://www.icollegete.com/course/auto-mechanical-course-in-rawalpindi/ Efi Auto Electrician Course in Pakistan http://www.icollegete.com/course/efi-auto-electrician-course-in-pakistan/ EFI Auto Hybrid Car Technology Course in Rawalpindi, Islamabad Pakistanhttp://www.icollegete.com/course/efi-auto-hybrid-car-technology-course-in-rawalpindi-islamabad-pakistan/

ICTE International College of Technical Education Pvt. Ltd Head Office : Office # 27, Second Floor, Maryam Shadi Hall Plaza (Airies Plaza), Shamsabad, Murree Road, Rawalpindi, Pakistan 46000. Email : info@icollegete.com Contact : 051-6122937, 0311-5193625, 0092-335-4176949 1:EFI Auto Hybrid Car Technology Course in Rawalpindi, Islamabad Sadar Auto Electricians install, maintain, identify faults and repair electrical wiring and computer-based equipment in motor vehicles and related equipment, such as caravans, trailers, earthmoving equipment, mining equipment, marine applications and agricultural equipment.An electrician is a tradesperson specializing in electrical wiring of buildings, stationary machines, and related equipment. Electricians may be employed in the installation of new electrical components or the maintenance and repair of existing electrical infrastructure. Electricians may also specialize in wiring ships, airplanes, and other mobile platforms, as well as data and cable. Automotive electronics are any electrically-generated systems used in road vehicles, such as: carputers, telematics, in-car entertainment systems, etc. Automotive electronics originated from the need to controll engines. The first electronic pieces were used to control engine functions and were referred to as engine control units (ECU). As electronic controls began to be used for more automotive applications, the acronym ECU took on the more general meaning of "electronic control unit", and then specific ECU's were developed. Now, ECU's are modular. Two types include engine control modules (ECM) or transmission control modules (TCM). A modern car may have up to 100 ECU's and a commercial vehicle up to 40. Automobile engineering, along with aerospace engineering and marine engineering, is a branch of vehicle engineering, incorporating elements of mechanical, electrical, electronic, software and safety engineering as applied to the design, manufacture and operation of motorcycles, automobiles and trucks and their respective engineering subsystems. It also includes modification of vehicles. Manufacturing domain deals with the creation and assembling the whole parts of automobiles is also included in it.The automotive engineering field is research -intensive and involves direct application of mathematical models and formulas. The study of automotive engineering is to design, develop, fabricate, and testing vehicles or vehicle components from the concept stage to production stage. Production, development, and manufacturing are the three major functions in this field. Automobile Engineering is mainly divided into three streams such as production or design engineering focuses on design components, testing of parts, co-ordinating tests, and system of a vehicle.Auto Electrician is there to service, maintain, check up, repair, and change electric and electronic devices and systems on the vehicle. A good and reliable auto electrician should know how to set up electric installations and network equipment on the cat based on the sketches; how to detect and remove installation and network equipment malfunctions.Also, this tradesman should perform quality control for the electrical work performed, considering the norms and regulations.Within the auto electric trade courses, International College of Technical Education has a six-month auto electrician course to offer. Having finished this course, each student will be able to identify the types and elements of electric installations, and network equipment; to differ the electric symbols, and explain how the electric installations are set up on a vehicle.The school also incorporates introducing the students to the procedures and rules of connecting electric and electronic devices to the installations, as well as to differ the types and uses of the tools, and devices which build and set up the electric installation and network equipment. Apart from theoretical representation of these procedures, the students will also be trained to set up and connect electric and electronic devices on the installations, to check the regularity of the installations, and use the appropriate tools. Diploma in EFI Hybrid Car Technology Course in Bagh, Muzaffarabad AJK http://www.icollegete.com/course/diploma-in-efi-hybrid-car-technology-course-in-bagh-muzaffarabad-ajk/ Diploma in Auto Efi Electrician course in Rawalpindi Pakistan http://www.icollegete.com/course/diploma-in-auto-efi-electrician-course-in-rawalpindi-pakistan/ EFI Auto Electrician Diploma Course in Rawalpindi http://www.icollegete.com/course/efi-auto-electrician-diploma-course-in-rawalpindi/ Electronic Fuel Injection EFI Course in Pakistan http://www.icollegete.com/course/electronic-fuel-injection-efi-course-in-pakistan/ EFI Auto Electrician Diploma Course in Rawalpindi Islamabad Pakistan http://www.icollegete.com/course/efi-auto-electrician-diploma-course-in-rawalpindi-islamabad-pakistan/

ICTE International College of Technical Education. Head Office : Office # 27, Second Floor, Maryam Shadi Hall Plaza (Airies Plaza), Shamsabad, Murree Road, Rawalpindi, Pakistan 46000. Email : info@icollegete.com Contact : 051-8736681, 0311-5193625, 0092-335-4176949 Auto Electricians install, maintain, identify faults and repair electrical wiring and computer-based equipment in motor vehicles and related equipment, such as caravans, trailers, earthmoving equipment, mining equipment, marine applications and agricultural equipment.An electrician is a tradesperson specializing in electrical wiring of buildings, stationary machines, and related equipment. Electricians may be employed in the installation of new electrical components or the maintenance and repair of existing electrical infrastructure. Electricians may also specialize in wiring ships, airplanes, and other mobile platforms, as well as data and cable. Automotive electronics are any electrically-generated systems used in road vehicles, such as: carputers, telematics, in-car entertainment systems, etc. Automotive electronics originated from the need to controll engines. The first electronic pieces were used to control engine functions and were referred to as engine control units (ECU). As electronic controls began to be used for more automotive applications, the acronym ECU took on the more general meaning of "electronic control unit", and then specific ECU's were developed. Now, ECU's are modular. Two types include engine control modules (ECM) or transmission control modules (TCM). A modern car may have up to 100 ECU's and a commercial vehicle up to 40. Automobile engineering, along with aerospace engineering and marine engineering, is a branch of vehicle engineering, incorporating elements of mechanical, electrical, electronic, software and safety engineering as applied to the design, manufacture and operation of motorcycles, automobiles and trucks and their respective engineering subsystems. It also includes modification of vehicles. Manufacturing domain deals with the creation and assembling the whole parts of automobiles is also included in it.The automotive engineering field is research -intensive and involves direct application of mathematical models and formulas. The study of automotive engineering is to design, develop, fabricate, and testing vehicles or vehicle components from the concept stage to production stage. Production, development, and manufacturing are the three major functions in this field. Automobile Engineering is mainly divided into three streams such as production or design engineering focuses on design components, testing of parts, co-ordinating tests, and system of a vehicle.Auto Electrician is there to service, maintain, check up, repair, and change electric and electronic devices and systems on the vehicle. A good and reliable auto electrician should know how to set up electric installations and network equipment on the cat based on the sketches; how to detect and remove installation and network equipment malfunctions.Also, this tradesman should perform quality control for the electrical work performed, considering the norms and regulations.Within the auto electric trade courses, International College of Technical Education has a six-month auto electrician course to offer. Having finished this course, each student will be able to identify the types and elements of electric installations, and network equipment; to differ the electric symbols, and explain how the electric installations are set up on a vehicle.The school also incorporates introducing the students to the procedures and rules of connecting electric and electronic devices to the installations, as well as to differ the types and uses of the tools, and devices which build and set up the electric installation and network equipment. Apart from theoretical representation of these procedures, the students will also be trained to set up and connect electric and electronic devices on the installations, to check the regularity of the installations, and use the appropriate tools. Diploma in EFI Hybrid Car Technology Course in Bagh, Muzaffarabad AJK http://www.icollegete.com/course/diploma-in-efi-hybrid-car-technology-course-in-bagh-muzaffarabad-ajk/ Diploma in Auto Efi Electrician course in Rawalpindi Pakistan http://www.icollegete.com/course/diploma-in-auto-efi-electrician-course-in-rawalpindi-pakistan/ EFI Auto Electrician Diploma Course in Rawalpindi http://www.icollegete.com/course/efi-auto-electrician-diploma-course-in-rawalpindi/ Electronic Fuel Injection EFI Course in Pakistan http://www.icollegete.com/course/electronic-fuel-injection-efi-course-in-pakistan/ EFI Auto Electrician Diploma Course in Rawalpindi Islamabad Pakistan http://www.icollegete.com/course/efi-auto-electrician-diploma-course-in-rawalpindi-islamabad-pakistan/ Efi Auto Electrician Course in Rawalpindi http://www.icollegete.com/course/efi-auto-electrician-course-in-rawalpindi/ Auto Mechanical Course in Rawalpindi http://www.icollegete.com/course/auto-mechanical-course-in-rawalpindi/ Efi Auto Electrician Course in Pakistan http://www.icollegete.com/course/efi-auto-electrician-course-in-pakistan/ EFI Auto Hybrid Car Technology Course in Rawalpindi, Islamabad Pakistanhttp://www.icollegete.com/course/efi-auto-hybrid-car-technology-course-in-rawalpindi-islamabad-pakistan/