Studio mic

Perfect Effect - Suspension boom arm hold your Wave 1 Mic in any position you want. No sag, just rock solid. Mic stand - Dual suspension springs of each boom arm protect microphone from shaking, suddenly dropping. Easy to Adjustment and Position - Rotates 360 degrees and a two axis swivel mount for giving you a perfect range of motion. Easy to Mount - It is so easy to setup, takes less than five minutes and get more convenient to use your micphone. All-in-one Combo - Package includes mic stand. Note: Not including Microphone!

For teaching, waist machine, V-band wireless microphone, U-band wireless microphone and computer microphone. 2. This microphone can be directly be plugged in the microphone interface of amplifier, laptop. 3. Recording is clear; small size, light weight, easy to carry. Specifications 1. Connection plug: 3.5 mm 2. Microphone size: F6.0 × 5.0 mm 3. Sensitivity: -52dB ± 2dB 4. Directionality: Omnidirectional 5. Impedance: = 680O 6. Working voltage: 2.0V 7. Frequency range: 100-16kHz 8. Signal to noise ratio: 60dB 9. Line length: about 120 cm / 47.24 in 10. Plug diameter: 3.5mm 100CM braided wire Product Contents 1 x microphone for mobile phone 1 x metal clip 1 x sponge windscreen

A standard microphone clip to mount any standard-sized hand-held microphone. Allows studioecording in a style. Idealforadio broadcasting studio voice over services & audioecording services. The double-braced arms provide extrastrength.

Features: For Computer Professional Condenser Audio 3.5mm Wired BM 800 Studio Microphone Vocal Recording Mic KTV Karaoke+Microphone stand/студия микрофон Ideal for radio broadcasting studio, voice-over sound studio, stages, TV stations, etc. Scissor arm Desktop Microphone Stand & Mic Boom Pop Filter & shock-proof mount Stable, Durable & Affordable Desktop type Microphone Stand; Double-braced arms add strength to stand much more weight; Foldable arms - minimize transport size and easy to storage; Scissor arms - completely flexible adjust the desired angle and height Adjustable clamp to mount on the desktop easily, fixes securely to any mic stand for easy to install and convenient to use. Dual suspension springs on each boom arm for extra stability. Double audio port - Connect the microphone input and earphone/speaker output at the same time. Specifications: Output Impedance: 150Ohm+ / -30% Microphone Output Interface: 3.5mm Signal Noise: 78dB XLR Cable Length: 2.5m Frequency Response: 20Hz-16kHz Load Impedance: Greater than equal 1000Ohm Electrical Current: 3mA Desk Clamp Max. Mount Thicknessl: 45mm Sensitivity: -38dB+ / -2dB Equivalent Noise: 16dBA Microphone Output Interface: 3.5mm Max. Length of Pop Filter's Gooseneck: 370mm

ENRG Scissor Arm Mic Suspension Stand Studio Recording With Microphone Holder For BM 800 Condenser Microphone Blue Yeti Adjustable feet for placement on uneven surfaces. Easy to apply to all microphones. Fully flexible, you can hold the microphone firmly in place. With an angle adjustment function with a locking knob, it can effectively reduce the operating noise. The double-braced arms provide extrastrength. Type: Desktop Microphone Stand Function: Adjustable Angle and Height Material: Metal Color: Black Size: 350mm x 320mm

Plug and play, plug directly into your devices with USB port, no needed drivers.With the USB terminal to supply power, the condenser microphone needs no 48V phantom power, battery, or other assistive devices.Cardioid pick-up pattern minimizes background noise and isolates the main sound source.2m long leather cord extends your music space freely and meets your need of all aspects of enjoyment.Wide frequency response (30Hz-20kHz) makes vocal performances sound clear, natural and vibrant. How to setting it?Plug the USB cable to your computer at the same time. Ready for use.If the microphone cannot be used to your device, please check if your device has set itself correctly with the microphone. If not, please follow the step to setting it. Step 1: Open your control panel, and click on /"sound/", a window pops up.Step 2: Select the recording, you will see the microphone is set up or on default.Step 3: Double click the microphone if it is already connected., and then setting yourmicrophone properties. 1.Unplug the USB cable to check whether the pins at the bottom of the mic are loosened.2.Restart computer and re-plug the mic to other USB port.3.If the /"USB PnP Audio Device/" appears in the sound settings of computer(below are the methods how to get to sound settings), the mic is able to work.(Windows: Right click speaker icon on right corner of computer→/"Recording Device/"Mac: Click /"System Preferences/"→/"Sound/"→/"Input/") If the mic disconnects itself without warning, what can I do?Answer: There are two reasons for this situation. One is that the poor connection. The other is that the USB cable is broken. If you have tried to replug the USB cable into the mic, and plug the mic to other USB port, then it will be the problem of the cable. If the mic has hissing what can I do? 1.Re-plug the USB cable into the microphone. If the cable gets loose, noiseis easily generated or transmission of signal may run into problem. 2.Reset computer and re-plug microphone into other USB port. 3.Place it not too close to any power source or computer host. Check whether there's smart-phone near by the USB cable. 4.Set the on-body control of mic and input/output level of computer at 50%-75%. Volume is the culprit for noise. (Windows: Right click speaker icon on right corner of computer→/"Recording Device/"//"Playback Device/"→right click /"USB PnP Device/"/default speaker→/"Properties/"→/"Levels/". If there's /"/"Microphone Boost/"/", turn it to 0-10dB. Mac: /"System Preferences/"→/"Sound/"→/"Input/"//"Output/"→/"Input Volume/"//"Output Volume/") 5.(If using Windows computer,) disable all sound effects. (Right click speaker icon on right corner of computer→/"Playback Device/"→right click the default loudspeaker→/"Enhancements/"→click /"Disable all sound effects/".) Hope these methods could help eliminate noise and make the mic sound better. Colour:black Material:Zinc alloy + plastic Size:14.5*4.8cm Package Contents: 1* microphone 1* USB cable 1* foam cover 1* manual Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

A standard microphone clip to mount any standard-sized hand-held microphone. Allows studio recording in a style. Idealfor radio broadcasting studio, voice over services & audio recording services. The double-braced arms provide extrastrength.

WIRELESS MICROPHONEBLUETOOTH MICROPHONEWIRELESS MICBLUETOOTH MICMINI STUDIOMICRO WIRELSS STUDIO

6/" Double-Layered Nylon Pop Screen Protects Against Vocal Plosives 13/" Flexible Gooseneck Protects Mic from Corrosive Moisture Sturdy C-Clamp with Thumbscrew Fastener Grommet & Padding Protect Stand Finish

Style: In-Ear Communication: Wireless Connectors: USB Use: Mobile Phone Function: Bluetooth, Microphone, answer, end, reject,make a call, music etc. Name: wireless headset with microphone Bluetooth Version: Bluetooth V4.1 Working distance: <15m Style: In-Ear Communication: Wireless Connectors: USB Use: Mobile Phone Function: Bluetooth, Microphone, answer, end, reject,make a call, music etc. Name: wireless headset with microphone Bluetooth Version: Bluetooth V4.1 Working distance: <15m Music time: 2-3 hours Talking time: 3-4 hours Charging time: 1-2 hours Charging voltage: <=5v Its an essential gadget to have during running and workout sessions to be avoided from noise pollution and keep oneself motivated..Its standby time is about 50 hours and its music time is about 3 hours. Its frequency range is 2.4GHz-2.48GHz Style: In-Ear Communication: Wireless Connectors: USB Use: Mobile Phone Function: Bluetooth, Microphone, answer, end, reject,make a call, music etc. Name: wireless headset with microphone Bluetooth Version: Bluetooth V4.1 Working distance: <15m Style: In-Ear Communication: Wireless Connectors: USB Use: Mobile Phone Function: Bluetooth, Microphone, answer, end, reject,make a call, music etc. Name: wireless headset with microphone Bluetooth Version: Bluetooth V4.1 Working distance: <15m Music time: 2-3 hours Talking time: 3-4 hours Charging time: 1-2 hours Charging voltage: <=5v Its an essential gadget to have during running and workout sessions to be avoided from noise pollution and keep oneself motivated..Its standby time is about 50 hours and its music time is about 3 hours. Its frequency range is 2.4GHz-2.48GHz BrandNo Brand SKU279706645_PK-1505911250 Cable LengthNot Specified wireless_connectivityBluetooth Headphone FeaturesRemote control,Sweat Proof,Noise Cancellation,Noise Isolating,Built in Microphone,Built in Storage,DJ,Studio,NFC Wearing TypeIn-Ear BluetoothYes Compatible Operating SystemUniversal Express deliveryLahore

ENRG 48V Phantom Power Supply with Adapter Power for Phantom XLR 3 Pin Microphone Cable for Any Condenser Microphone Music Recording Equipment - Black Input Voltage: 110V Delivers reliable 48V phantom power for condenser microphones and transfer sound signal to sound card in a compact, durable, plastic housing. Universal XLR input and output, compatible with all kinds of microphone music recording equipment.Comes with one XLR audio cable with high quality XLR male and female connectors. Features a single channel unit with balanced mic inputs and outputs to connect in-line with your mic and mixer. On/off power switch and LED indicator for ease of operation. One Adapter is included. Simple to use and ideal for stage and studio use.

ENRG Mic 3.5mm Jack With Stand Holder For Studio Recording High frequency response makes the vocal performance clear, natural and vibrant. Portable plug and play The 3.5 stereo jack is suitable for most PCs. Sensitivity: -55dB ± 2dB Impedance: 2.2 K Reduced Sensitivity: En-3dB at 1.5 V Operating Voltage: 1.5 V Frequent Response: 50Hz-16KHz Signal to Noise Ratio: more than 36dB Color: White / Gold / Black Microphone Height: 13.3 cm Microphone Cable Length: approx. 1.85 m / 6.07 ft