Shure control unit

Description: Details iShopping.pk brings you the best price for Shure Central Control Unit With Power Supply Kit with express shipping all over Pakistan.   The Central Control Unit for DDS 5900 and DCS 6000 Conference Systems from Shure powers up to 60 microphone units and supports up to 250 units. It supports 2 languages and 32 interpreters and can be used in various speech-application environments such as hotel/conference centers, multi-purpose/training rooms, education facilities, corporate/board rooms, courtrooms, and more. Featuring two analog audio inputs for external sources, the Central Control Unit has eight analog audio outputs for connections to videoconferencing systems, A/V recording equipment, supplemental sound reinforcement systems, or wireless language distributions system. In addition, with Feature License FL6000 (sold separately), the DIS-CCU can be used with DCS 6000-series microphone units serving up to 250 participants and 4 languages. Additional Feature Licenses enable support for up to 3,800 participants, 200 interpreters, and 31 languages. • Fully digital audio transmission of floor plus 31 interpretation channels and 8 conference microphone audio channels in a single digital-bus cable structure using shielded CAT5e cables • OLED display on the front enables the user to setup basic system configurations in terms of maximum number of speakers/requests, microphone operation mode, etc. • TCP/IP Ethernet connection for web browser control, integration with optional SW 6000 software suite, or third party external control system (AMX, Crestron, etc.) • 2 analog audio inputs and 8 analog audio outputs for distribution of audio from eight groups of units, the floor channel, or the interpreter channels. • Connection for Emergency Evacuation Message (EEM) is available using 'Audio In 2' and a contact closure switch • Powers up to 60 units without additional power supply (depending on unit type)   Features: • Central Control Unit and Microprocessor • Power Supply for Central Control Unit • For DDS 5900 & DCS 6000 Systems • 4 Modes: Auto, FIFI, VOX, and Manual • 3 Microphone Interrupt Modes • 2 Analog Audio Inputs • Up to 8 Microphones Open at One Time • Scrambles Audio to Avoid Evesdropping • Auto Off of Conference Units   Specifications: System Performance Max Number of Discussion Units For DDS 5900: 250 Powered by CU 5905: 60 Microphones Max Number Open: 8 Languages Interpreter Channels: 2 Max Number of Interpreter Units: 32 Network LAN DCS-LAN Outputs: 4 x RJ45 female sockets TCP/IP 1 x RJ45 female socket Audio Inputs Analog Input 1: 1 x 3-pin female XLR socket (electronically balanced) Analog Input 2 EEM: 1 x 3-pin female XLR socket (electronically balanced) with contact closure Input Level Max: +15 dBm (4.5 Vrms) Input Impedance 50 to 100 kOhms Audio Output 8 x 3-pin XLR (electronically balanced) Maximum load: >1 kOhms Maximum Load >1 kOhms Nominal Output Levels 0 dBm at nominal input Maximum Output Level 4.9 Vrms ~ +16 dBm Electrical Power Consumption 22 W/48 V (150 W max.) Supply Voltage For Microphone Units: 122 W/48 V Sampling Frequency 24-bit/32 kHz Total Harmonic Distortion (THD) Signal to Noise Ratio >85 dBA Mechanical Mounting Tabletop, standard 19" rack. Storage Temperature Range -4 to 140°F (-20 to 60°C) Operating Temperature Range 41 to 104°F (5 to 40°C) Humidity 10 to 80% Dimensions (H x W x D) 1.75 x 16.8 x 7.2" (44.4 x 426 x 186 mm) Weight 6.17 lb (2.8 kg)  

Description: Details iShopping.pk brings you the best price for Shure Central Control Unit Conference System with express shipping all over Pakistan.   Central control unit for use with DDS 5900 (standard) or DCS 6000 microphone units (requires optional Feature License). In standard DDS 5900 mode, powers up to 60 microphone units and supports up to 250 units. Also supports 2 languages and 32 interpreters. Two analog audio inputs for external sources such as wireless microphones, and 8 analog audio outputs for connection to videoconferencing system, A/V recording equipment, supplemental sound reinforcement system, or wireless language distribution system. With Feature License FL6000, the DIS-CCU can be used with DCS 6000-series microphone units serving up to 250 participants and 4 languages.  Additional Feature Licenses enable support for up to 3,800 participants, 200 interpreters, and 31 languages.   Features: • Fully digital audio transmission of floor plus 31 interpretation channels and 8 conference microphone audio channels in a single digital bus cable structure using shielded CAT5e cables • OLED display on the front enables the user to setup basic system configurations in terms of maximum number of speakers/requests, microphone operation mode, etc. • TCP/IP Ethernet connection for web browser control, integration with optional SW 6000 software suite, or third party external control system (AMX, Crestron, etc.) • Multi-language web browser for system configuration, microphone/request list control and basic operational parameters via tablet or computer • Built-in seat table for attaching seat numbers and names to units using the web browser • 2 Analog audio inputs • 8 Analog audio outputs for distribution of audio from eight groups of units, the floor channel or the interpreter channels • Connection for Emergency Evacuation Message (EEM) is available using ‘Audio In 2’ and a contact closure switch • Firmware upgrade of the entire DCS 6000 system is possible via a PC • Powers up to 60 units without additional power supply (depending on unit type) • Long life, low-noise built-in temperature regulated fan • Horizontal orientation of air stream for easy stacking of units in 19" racks • External control possible via a ‘simple to use’ protocol for external control over Ethernet • Using DCS-LAN, a proprietary high-speed all-digital audio channel, data and power bus • Four DCS-LAN chains powered by one external PS CU power supply • Versatile test program available for testing the system performance, the conference units and the interpreter sets • Video-follow-audio camera control with optional CP 7890 Camera Control System

Description: Details iShopping.pk brings you the best price for Bosch CCS-CU Control Unit For CCS 900 Ultro Conference System with express shipping all over Pakistan.   The Bosch CCS-CU Control Unit is the central power and control station for all CCS 900 Ultro Conference System contributor units, such as the chairman and delegate units. The control unit will supply power for up to 50 delegate / chairman units, and provide control for up to 150. The unit features a built in speaker and automated, programmable control over contributor units without the need for an operator. Its Digital Acoustic Feedback Suppression (DAFS) eliminates feedback howling and maintains clear, intelligible speech. Plenty of connections allow for interfacing within paging systems, amplifier systems, recording devices and more. The unit is feature rich, however its control section is straightforward and intuitive to operate in any conference setting.   Features: Discussion Control Without Operator The CU can be setup to operate standalone without the need for an operator. The following 5 modes can be chosen using a rotary control on the unit's top panel: • Open mode - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active • Open mode with auto-switch-off - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active. If the delegate does not speak for 30 seconds, microphones are automatically switched off • Override mode - delegates can override each other simply by activating their microphones. Only one microphone can be active at any one time. (Note: In override mode, delegates cannot override chairmen) • Chairman only mode - only chairmen can speak. Delegate microphones cannot be activated, even when a chairman is not speaking • Test mode - checks if system connections are correct. All microphone light rings and contribution unit LEDs light up to indicate that units are properly connected Supplies Power for up to 50 Contribution Units The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to connect 25 contribution units to each trunk output, with a maximum system cable length of 109.3 yards (100m). Provides Control for up to 150 Contribution Units Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150 contribution units. In this configuration a single CU acts as a master controller for the entire system. Built-in Monitor Loudspeaker The built-in monitor loudspeaker and headphone socket allow the conference to be monitored. Interfaces the System With External Equipment The following equipment can be interfaced to the CCS Ultro Discussion System through the CU: • External wired or wireless microphone - for guest speakers or audience participation. (Note: The external microphone is muted when the priority button on a chairman unit is pressed, and when the system is operating in 'chairman only' mode) • External PA system - for transmitting the proceedings to an audience in the same room or an adjacent room• Tape recorder - for external recording and playing back meetings and discussions • Audio equipment - for providing background music • Telephone coupler - to allow a remote delegate to participate via telephone• External audio processing - an insertion connector is provided Controls and Indicators (Top) • Mains on/off switch • Graphical display for status information (CCS‐CURD) • 5 soft buttons for configuration and control of thebuilt-in MP3 recorder (CCS‐CURD) • Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This control also determines the maximum level for the headphone outputs of the contribution units and the CU. • Microphone mode rotary switch, for setting the number of simultaneously active microphones, and selecting one of the four operation modes (plus test mode) • Power on LED Controls and Indicators (Back) • On/off switch for digital acoustic feedback suppression facility (CCS‐CUD, CCS‐CURD)• Microphone input gain adjustment • External recorder input gain adjustment• Insertion connector bypass switch   Specifications: Connections Top • 1x 0.14" (3.5mm) stereo headphone socket Back • 1x AC input • 2x 7-pole circular female connectors, trunk in/out loop through interconnection  • 1x 3-pole female XLR connector, microphone input (can be used as line input by included 50dB attenuator) • 1 x Cinch connector pair, line input/output  • 1 x Cinch connector pair, telephone input/output • 1 x Cinch connector pair, insertion input/output  • 2 x Cinch connector pairs (R/L channel), external recorder input/output • USB interface (CCS-CURD) Power Supply Mains voltage: 100 to 240 VAC ± 10% Current consumption: maximum 0.9A (100 VAC) to 0.3 A (240 VAC) DC supply to contribution units: 24V ± 1V (current limited) Volume mute (50dB att.) + 10 steps of 1.9dB Limiter 10dB above nominal level loudspeaker / headphone Gain Gain reduction due to number of open microphones (NOM): ÷ NOM ± 1 dB Total Harmonic Distortion Nominal input (85 dB SPL): Max. input (110 dB SPL): Sample Rate Recording: 32kHz Playback: 32, 44.1, 48kHz Bit Rate Recording: 64, 96, 128, 192, 256 KBit/sec Playback: any bitrate Mount Tabletop (portable or fixed) 19-inch rack flush mounting Material Top: polymer Bottom: painted metal Color Charcoal and Black Dimensions (HxWxD) 3.4 x 14.2 x 5.6" (84 x 361 x 143mm) Height of feet: 0.22" (5.5mm) Weight 3.3 lb (1.5kg)

Description: Details iShopping.pk brings you the best price for Bosch CCS-CUD Control Unit For CCS 900 Ultro Conference System with express shipping all over Pakistan.   The Bosch CCS-CUD Control Unit is the central power and control station for all CCS 900 Ultro Conference System contributor units, such as the chairman and delegate units. The control unit will supply power for up to 50 delegate / chairman units, and provide control for up to 150. The unit features a built in speaker and automated, programmable control over contributor units without the need for an operator. Its Digital Acoustic Feedback Suppression (DAFS) eliminates feedback howling and maintains clear, intelligible speech. Plenty of connections allow for interfacing within paging systems, amplifier systems, recording devices and more. The unit is feature rich, however its control section is straightforward and intuitive to operate in any conference setting.   Features: Digital Acoustic Feedback Suppression The digital acoustic feedback suppression facility automatically eliminates acoustic feedback (also known as 'howling' or 'Larsen effect'). This gives better speech intelligibility by allowing the speaker volume to be turned up as loud as required without any risk of feedback. Discussion Control Without Operator The CU can be setup to operate standalone without the need for an operator. The following 5 modes can be chosen using a rotary control on the unit's top panel: • Open mode - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active • Open mode with auto-switch-off - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active. If the delegate does not speak for 30 seconds, microphones are automatically switched off • Override mode - delegates can override each other simply by activating their microphones. Only one microphone can be active at any one time. (Note: In override mode, delegates cannot override chairmen) • Chairman only mode - only chairmen can speak. Delegate microphones cannot be activated, even when a chairman is not speaking • Test mode - checks if system connections are correct. All microphone light rings and contribution unit LEDs light up to indicate that units are properly connected Supplies Power for up to 50 Contribution Units The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to connect 25 contribution units to each trunk output, with a maximum system cable length of 109.3 yards (100m). Provides Control for up to 150 Contribution Units Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150 contribution units. In this configuration a single CU acts as a master controller for the entire system. Built-in Monitor Loudspeaker The built-in monitor loudspeaker and headphone socket allow the conference to be monitored. Interfaces the System With External Equipment The following equipment can be interfaced to the CCS Ultro Discussion System through the CU: • External wired or wireless microphone - for guest speakers or audience participation. (Note: The external microphone is muted when the priority button on a chairman unit is pressed, and when the system is operating in 'chairman only' mode) • External PA system - for transmitting the proceedings to an audience in the same room or an adjacent room• Tape recorder - for external recording and playing back meetings and discussions • Audio equipment - for providing background music • Telephone coupler - to allow a remote delegate to participate via telephone• External audio processing - an insertion connector is provided Controls and Indicators (Top) • Mains on/off switch • Graphical display for status information (CCS‐CURD) • 5 soft buttons for configuration and control of thebuilt-in MP3 recorder (CCS‐CURD) • Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This control also determines the maximum level for the headphone outputs of the contribution units and the CU. • Microphone mode rotary switch, for setting the number of simultaneously active microphones, and selecting one of the four operation modes (plus test mode) • Power on LED Controls and Indicators (Back) • On/off switch for digital acoustic feedback suppression facility (CCS‐CUD, CCS‐CURD)• Microphone input gain adjustment • External recorder input gain adjustment• Insertion connector bypass switch   Specifications: Connections Top • 1x 0.14" (3.5mm) stereo headphone socket Back • 1x AC input • 2x 7-pole circular female connectors, trunk in/out loop through interconnection  • 1x 3-pole female XLR connector, microphone input (can be used as line input by included 50dB attenuator) • 1 x Cinch connector pair, line input/output  • 1 x Cinch connector pair, telephone input/output • 1 x Cinch connector pair, insertion input/output  • 2 x Cinch connector pairs (R/L channel), external recorder input/output • USB interface (CCS-CURD) Power Supply Mains voltage: 100 to 240 VAC ± 10% Current consumption: maximum 0.9A (100 VAC) to 0.3 A (240 VAC) DC supply to contribution units: 24V ± 1V (current limited) Volume mute (50dB att.) + 10 steps of 1.9dB Limiter 10dB above nominal level loudspeaker / headphone Gain Gain reduction due to number of open microphones (NOM): ÷ NOM ± 1 dB Total Harmonic Distortion Nominal input (85 dB SPL): Max. input (110 dB SPL): Sample Rate Recording: 32kHz Playback: 32, 44.1, 48kHz Bit Rate Recording: 64, 96, 128, 192, 256 KBit/sec Playback: any bitrate Mount Tabletop (portable or fixed) 19-inch rack flush mounting Material Top: polymer Bottom: painted metal Color Charcoal and Black Dimensions (HxWxD) 3.4 x 14.2 x 5.6" (84 x 361 x 143mm) Height of feet: 0.22" (5.5mm) Weight 3.3 lb (1.5kg)

Description: Details iShopping.pk brings you the best price for Bosch CCS-CU Control Unit For CCS 900 Ultro Conference System U.S. Version with express shipping all over Pakistan.   The Bosch CCS-CU Control Unit is the central power and control station for all CCS 900 Ultro Conference System contributor units, such as the chairman and delegate units. The control unit will supply power for up to 50 delegate / chairman units, and provide control for up to 150. The unit features a built in speaker and automated, programmable control over contributor units without the need for an operator. Its Digital Acoustic Feedback Suppression (DAFS) eliminates feedback howling and maintains clear, intelligible speech. Plenty of connections allow for interfacing within paging systems, amplifier systems, recording devices and more. The unit is feature rich, however its control section is straightforward and intuitive to operate in any conference setting.   Features: Discussion Control Without Operator The CU can be setup to operate standalone without the need for an operator. The following 5 modes can be chosen using a rotary control on the unit's top panel: • Open mode - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active • Open mode with auto-switch-off - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active. If the delegate does not speak for 30 seconds, microphones are automatically switched off • Override mode - delegates can override each other simply by activating their microphones. Only one microphone can be active at any one time. (Note: In override mode, delegates cannot override chairmen) • Chairman only mode - only chairmen can speak. Delegate microphones cannot be activated, even when a chairman is not speaking • Test mode - checks if system connections are correct. All microphone light rings and contribution unit LEDs light up to indicate that units are properly connected Supplies Power for up to 50 Contribution Units The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to connect 25 contribution units to each trunk output, with a maximum system cable length of 109.3 yards (100m). Provides Control for up to 150 Contribution Units Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150 contribution units. In this configuration a single CU acts as a master controller for the entire system. Built-in Monitor Loudspeaker The built-in monitor loudspeaker and headphone socket allow the conference to be monitored. Interfaces the System With External Equipment The following equipment can be interfaced to the CCS Ultro Discussion System through the CU: • External wired or wireless microphone - for guest speakers or audience participation. (Note: The external microphone is muted when the priority button on a chairman unit is pressed, and when the system is operating in 'chairman only' mode) • External PA system - for transmitting the proceedings to an audience in the same room or an adjacent room • Tape recorder - for external recording and playing back meetings and discussions • Audio equipment - for providing background music • Telephone coupler - to allow a remote delegate to participate via telephone• External audio processing - an insertion connector is provided Controls and Indicators (Top) • Mains on/off switch • Graphical display for status information (CCS‐CURD) • 5 soft buttons for configuration and control of thebuilt-in MP3 recorder (CCS‐CURD) • Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This control also determines the maximum level for the headphone outputs of the contribution units and the CU. • Microphone mode rotary switch, for setting the number of simultaneously active microphones, and selecting one of the four operation modes (plus test mode) • Power on LED Controls and Indicators (Back) • On/off switch for digital acoustic feedback suppression facility (CCS‐CUD, CCS‐CURD)• Microphone input gain adjustment • External recorder input gain adjustment • Insertion connector bypass switch   Specifications: Connections Top • 1x 0.14" (3.5mm) stereo headphone socket Back • 1x AC input • 2x 7-pole circular female connectors, trunk in/out loop through interconnection  • 1x 3-pole female XLR connector, microphone input (can be used as line input by included 50dB attenuator) • 1 x Cinch connector pair, line input/output  • 1 x Cinch connector pair, telephone input/output • 1 x Cinch connector pair, insertion input/output  • 2 x Cinch connector pairs (R/L channel), external recorder input/output • USB interface (CCS-CURD) Power Supply Mains voltage: 100 to 240 VAC ± 10% Current consumption: maximum 0.9A (100 VAC) to 0.3 A (240 VAC) DC supply to contribution units: 24V ± 1V (current limited) Volume mute (50dB att.) + 10 steps of 1.9dB Limiter 10dB above nominal level loudspeaker / headphone Gain Gain reduction due to number of open microphones (NOM): ÷ NOM ± 1 dB Total Harmonic Distortion Nominal input (85 dB SPL): Max. input (110 dB SPL): Sample Rate Recording: 32kHz Playback: 32, 44.1, 48kHz Bit Rate Recording: 64, 96, 128, 192, 256 KBit/sec Playback: any bitrate Mount Tabletop (portable or fixed) 19-inch rack flush mounting Material Top: polymer Bottom: painted metal Color Charcoal and Black Dimensions (HxWxD) 3.4 x 14.2 x 5.6" (84 x 361 x 143mm) Height of feet: 0.22" (5.5mm) Weight 3.3 lb (1.5kg)

Description: Details iShopping.pk brings you the best price for Bosch CCS-CUD Control Unit For CCS 900 Ultro Conference System U.S. Version with express shipping all over Pakistan.   The Bosch CCS-CUD Control Unit is the central power and control station for all CCS 900 Ultro Conference System contributor units, such as the chairman and delegate units. The control unit will supply power for up to 50 delegate / chairman units, and provide control for up to 150. The unit features a built in speaker and automated, programmable control over contributor units without the need for an operator. Its Digital Acoustic Feedback Suppression (DAFS) eliminates feedback howling and maintains clear, intelligible speech. Plenty of connections allow for interfacing within paging systems, amplifier systems, recording devices and more. The unit is feature rich, however its control section is straightforward and intuitive to operate in any conference setting.   Features: Digital Acoustic Feedback Suppression The digital acoustic feedback suppression facility automatically eliminates acoustic feedback (also known as 'howling' or 'Larsen effect'). This gives better speech intelligibility by allowing the speaker volume to be turned up as loud as required without any risk of feedback. Discussion Control Without Operator The CU can be setup to operate standalone without the need for an operator. The following 5 modes can be chosen using a rotary control on the unit's top panel: • Open mode - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active • Open mode with auto-switch-off - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active. If the delegate does not speak for 30 seconds, microphones are automatically switched off • Override mode - delegates can override each other simply by activating their microphones. Only one microphone can be active at any one time. (Note: In override mode, delegates cannot override chairmen) • Chairman only mode - only chairmen can speak. Delegate microphones cannot be activated, even when a chairman is not speaking • Test mode - checks if system connections are correct. All microphone light rings and contribution unit LEDs light up to indicate that units are properly connected Supplies Power for up to 50 Contribution Units The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to connect 25 contribution units to each trunk output, with a maximum system cable length of 109.3 yards (100m). Provides Control for up to 150 Contribution Units Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150 contribution units. In this configuration a single CU acts as a master controller for the entire system. Built-in Monitor Loudspeaker The built-in monitor loudspeaker and headphone socket allow the conference to be monitored. Interfaces the System With External Equipment The following equipment can be interfaced to the CCS Ultro Discussion System through the CU: • External wired or wireless microphone - for guest speakers or audience participation. (Note: The external microphone is muted when the priority button on a chairman unit is pressed, and when the system is operating in 'chairman only' mode) • External PA system - for transmitting the proceedings to an audience in the same room or an adjacent room • Tape recorder - for external recording and playing back meetings and discussions • Audio equipment - for providing background music • Telephone coupler - to allow a remote delegate to participate via telephone• External audio processing - an insertion connector is provided Controls and Indicators (Top) • Mains on/off switch • Graphical display for status information (CCS‐CURD) • 5 soft buttons for configuration and control of thebuilt-in MP3 recorder (CCS‐CURD) • Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This control also determines the maximum level for the headphone outputs of the contribution units and the CU. • Microphone mode rotary switch, for setting the number of simultaneously active microphones, and selecting one of the four operation modes (plus test mode) • Power on LED Controls and Indicators (Back) • On/off switch for digital acoustic feedback suppression facility (CCS‐CUD, CCS‐CURD)• Microphone input gain adjustment • External recorder input gain adjustment • Insertion connector bypass switch   Specifications: Connections Top • 1x 0.14" (3.5mm) stereo headphone socket Back • 1x AC input • 2x 7-pole circular female connectors, trunk in/out loop through interconnection  • 1x 3-pole female XLR connector, microphone input (can be used as line input by included 50dB attenuator) • 1 x Cinch connector pair, line input/output  • 1 x Cinch connector pair, telephone input/output • 1 x Cinch connector pair, insertion input/output  • 2 x Cinch connector pairs (R/L channel), external recorder input/output • USB interface (CCS-CURD) Power Supply Mains voltage: 100 to 240 VAC ± 10% Current consumption: maximum 0.9A (100 VAC) to 0.3 A (240 VAC) DC supply to contribution units: 24V ± 1V (current limited) Volume mute (50dB att.) + 10 steps of 1.9dB Limiter 10dB above nominal level loudspeaker / headphone Gain Gain reduction due to number of open microphones (NOM): ÷ NOM ± 1 dB Total Harmonic Distortion Nominal input (85 dB SPL): Max. input (110 dB SPL): Sample Rate Recording: 32kHz Playback: 32, 44.1, 48kHz Bit Rate Recording: 64, 96, 128, 192, 256 KBit/sec Playback: any bitrate Mount Tabletop (portable or fixed) 19-inch rack flush mounting Material Top: polymer Bottom: painted metal Color Charcoal and Black Dimensions (HxWxD) 3.4 x 14.2 x 5.6" (84 x 361 x 143mm) Height of feet: 0.22" (5.5mm) Weight 3.3 lb (1.5kg)

Description: Details iShopping.pk brings you the best price for Bosch Digital Discussion For Control Unit (CCSD-CU) with express shipping all over Pakistan.   The Bosch CCSD-CU is the basic control unit for the Bosch CCS-1000D digital conference system. This control unit powers the discussion microphones (up to 80 in total), controls cameras (CCTV software included) and interfaces with external equipment such as a public address system. The front panel provides the neccessary controls but the system can also be controlled via a laptop or tablet. This includes the ability to activate or deactivate participant microphones, or changing the status of paticipants from 'waiting' to 'speaking'. Up to 6 HD cameras can be connected and controlled via the integral software, in order to relay the image of the person speaking onto a large screen.   Features: • Plug-and-play functionality for quick and easy connection of up to 80 Discussion Devices • Intuitive web browser control for advanced configuration and control   Specifications: Mains voltage 100 to 240 VAC ± 10% Current consumption Maximum 0.6 A (100 VAC) to 0.2 A (240 VAC) DC supply to Discussion Devices 24 V ± 1 V (current limited) Number of Discussion Devices per Control Unit Max. 40 devices per trunk connector Discussion Device loudspeakers volume control 15 steps of 1.5 dB (starting from -10.5 dB) Limit threshold level to unit 12 dB above nominal level Gain reduction due to number of open microphones (NOM) 1/SQRT (NOM) Sample rate 44.1 kHz Nominal input (85 dB SPL) Max. input (110 dB SPL) XLR nominal microphone input -56 dBV XLR maximum microphone input -26 dBV RCA nominal input -24 dBV (+/- 6 dB) RCA maximum input +6 dBV S/N > 94 dBA Frequency response 30 Hz to 20 kHz RCA nominal output -24 dBV (+6/- 24 dB) RCA maximum output +6 dBV S/N > 102 dBA Frequency response 30 Hz to 20 kHz Recording/ Playback (bit rate) 64, 96, 128, 256 Kbit/sec Recording/ Playback (sample frequency) 44.1 kHz Nominal output 72 dB SPL Frequency response 200 Hz to 12.5 kHz Gain range mute -10.5 to +12 SanDisk USB memory stick Formatted with FAT32 file system.Maximum size: 128 GB. Bite rate Internal memory hours, USB memory stick hours 16 GB 32 GB, 64 GB, 128 GB 64 8 hrs, 500, 1000, 2000, 4000 96 5 hrs, 350, 700, 1400, 2800 128 4 hrs, 250, 500, 1000, 2000 256 * 2 hrs, 125, 250, 500, 1000 Dimensions including feet (H x W x D) 45 x 440 x 200 mm(1.8 x 17.3 x 7.9 in)19” wide, 1 RU high Height of feet 5.5 mm (0.2 in) Mounting Tabletop19-inch rack Weight (CCSD-CU) Approx. 3.2 kg (7.1 lb) Weight (CCSD-CURD) Approx. 3.4 kg (7.5 lb) Material (top) Painted metal Material (base) Painted metal Color (top) Traffic black (RAL 9017) matt-gloss Color (base) Traffic black (RAL 9017) matt-gloss Rim Pearl light grey (RAL 9022) matt-gloss Operating temperature 5 ºC to +45 ºC (+41 ºF to +113 ºF) Storage temperature -40 ºC to +70 ºC (-40 ºF to +158 ºF) Relative humidity 5% to 98% non-condensing

Description: Details iShopping.pk brings you the best price for Bosch Control Unit With DAFS & Recorder (CCSD-CURD) with express shipping all over Pakistan.   Features: • Plug-and-play functionality for quick and easy connection of up to 80 Discussion Devices • Intuitive web browser interface control for advanced configuration and control • Built‑in MP3 recorder with internal memory and USB recording • Built‑in Digital Acoustic Feedback Suppression (DAFS) for ensuring superior speech intelligibility • On-board support for automatic HD camera control   Specifications: Supply voltage Adaptor 100 to 240 VAC, 50/60 Hz Current Consumption voltage Adaptor 1.9 A (100 VAC) to 1 A 240 (VAC) DC voltage Control Unit 24 V, 6.0 A Maximum number of Discussion Devices for Control Unit (without Extension Unit) 40 Discussion Devices per trunk 80 Discussion Device in total 24 V, Max 5.2 A (short-circuited protected) Discussion Device loudspeakers volume control 15 steps of 1.5 dB (starting from -10.5 dB) Limit threshold level to unit 12 dB above nominal level Gain reduction due to number of open microphones (NOM) 1/SQRT (NOM) Sample rate 44.1 kHz Frequency response 30 Hz to 20 kHz Ethernet speed 1 Gb/s Nominal input (85 dB SPL) Max. input (110 dB SPL) XLR nominal microphone input -56 dBV XLR maximum microphone input -26 dBV RCA nominal input -24 dBV (+/- 6 dB) RCA maximum input +6 dBV S/N > 93 dBA Frequency response 30 Hz to 20 kHz THD RCA nominal output -24 dBV (+6/- 24 dB) RCA maximum output +6 dBV S/N > 93 dBA Frequency response 30 Hz to 20 kHz THD Recording/ Playback (bit rate) 64, 96, 128, 256 Kbit/sec Recording/ Playback (sample frequency) 44.1 kHz Nominal output 72 dB SPL Frequency response 200 Hz to 16 kHz (acoustical) Gain range Mute -10.5 to +12 dB SanDisk USB memory stick Formatted with FAT32 file system. Maximum size: 128 GB. Bite rate Internal memory size/hours, USB memory stick size/hours 225 MB 16 GB, 32 GB, 64 GB, 128 GB 64 8 hrs, 500 hrs, 1000 hrs, 2000 hrs, 4000 hrs 96 5 hrs, 350 hrs, 700 hrs, 1400 hrs, 2800 hrs 128 4 hrs, 250 hrs, 500 hrs, 1000 hrs, 2000 hrs 256 * 2 hrs, 125 hrs, 250 hrs, 500 hrs, 1000 hrs Dimensions including feet (H x W x D) 45 x 440 x 200 mm(1.8 x 17.3 x 7.9 in) 19” wide, 1 RU high Height of feet 5.5 mm (0.2 in) Mounting Tabletop or 19 “ rack Material (top and base) Painted metal Color (top and base) Traffic black (RAL 9017) matt-gloss Rim front panel Pearl light grey (RAL 9022) matt-gloss Weight (CCSD‑CURD) Approx. 3.4 kg (7.5 lb) Operating temperature 5 ºC to +45 ºC (+41 ºF to +113 ºF) Storage and transport temperature -40 ºC to +70 ºC (-40 ºF to +158 ºF) Relative humidity 5% to 98% non-condensing

Description: Details iShopping.pk brings you the best price for Shure Gooseneck Base Transmitter (MXW8) with express shipping all over Pakistan.   The MXW8 Gooseneck Base Transmitter from Shure is a bi-directional base transmitter for optional gooseneck microphones and is compatible with Shure's Microflex wireless system. The unit has an earphone output that allows you to monitor return audio, useful for translations or programming material. It is capable of AES 256-bit encryption audio transmission to assure a secure signal. It is powered by a built-in rechargeable battery that can provide up to 8 hours of operation.   Features: • Wide frequency response: Full range audio for clear voice transmission •  Concealed power switch: Prevents accidental powering off •  Bi-directional wireless: Enables return channel audio and real time remote control of all wireless microphone settings including light ring indication •  Earphone output: Listen to audio from a return channel for translation, cueing, or program material •  Programmable mute button: Customize local or remote muting behavior per application, with options including push-to talk, push-to-mute, and external control •  Encrypted wireless: AES 256-bit encryption for secure wireless transmission •  Wide working range: Reliable wireless coverage extends up to 160 feet (50 meters) •  Out of range alert: Emits beeping sound when range limit is exceeded •  Wireless linking: Assign the microphone to an Access Point channel by simply docking it in a Networked Charging Station and pressing "link" •  Li-ion batteries: Smart lithium-ion internal batteries provide up to 9 hours of continuous use, charge to full in 2 hours, and enable remote monitoring over the network of remaining runtime and charge status in hours and minutes Standby mode: Enabled remotely during periods of inactivity to significantly extend battery life when not in use •  Low-battery LED: Visually alerts when there is 30 minutes of charge remaining •  USB charging: Connects to any standard USB power source for "always on" usage   Specifications: Gain Adjustment Range -25 to 15 dB (in 1 dB steps) Maximum Input Level −9 dBV (mic gain @ -16 dB) Headphone Output 1/8" (3.5 mm) dual mono (will drive stereo headphones) Output Power Headphone: 17.5 mW (1 kHz @ 1% distortion, peak power, @ 16 Ω) Antenna Type Internal, spacial diversity, linear polarization Battery Type Rechargeable Li-Ion Battery Life Up to 9 hours (Calculated with a new battery. Runtimes vary depending on battery health) Charge Connector USB 3.0 Type A Housing Molded plastic Temperature Range Recommended for Storage: 32 to 77°F (0 to 25°C) Connector 6-pin connector for Shure MX405/10/15 Configuration Unbalanced Input Impedance >20 kΩ (@ 1 kHz) Dimensions (HxWxD) 1.4 x 2.8 x 4.9" (36 x 71 x 124 mm) Weight 6.8 oz (193 g) with batteries, without microphone

Description: Details iShopping.pk brings you the best price for Shure Omnidirectional Boundary Transmitter (MXW6) with express shipping all over Pakistan.   The MXW6 Omnidirectional Boundary Transmitter from Shure is a bi-directional boundary transmitter with a built-in omnidirectional microphone designed for use with Shure's Microflex wireless conference system. The unit has an earphone output that allows you to monitor return audio, useful for translations or programming material. It has a concealed power switch for preventing accidental turn-off. It transmits your audio with AES 256-bit encryption for secure broadcasting. The MXW6's built-in rechargeable battery can provide up to 9 hours of operation.   Features: • Wide frequency response: Full-range audio for clear voice transmission • Bi-directional wireless: Enables return channel audio and real time remote control of all wireless microphone settings • Earphone output: Listen to audio from a return channel for translation, cueing, or program material • Concealed power switch: Prevents accidental powering off • Programmable mute button: Customize local or remote muting behavior per application, with options including push-to talk, push-to-mute, and external control • Encrypted wireless: AES 256-bit encryption for secure transmission • Wide working range: Reliable wireless coverage extends up to 160 feet (50 meters) • Out of range alert: Emits beeping sound when range limit is exceeded • Easy wireless linking: Assign the microphone to an Access Point channel by simply docking it in a Networked Charging Station and pressing "link" • Li-ion batteries: Smart lithium-ion internal batteries provide up to 9 hours of continuous use, charge to full in 2 hours, and enable remote monitoring over the network of remaining runtime and charge status in hours and minutes • Standby mode: Enabled remotely during periods of inactivity to significantly extend battery life when not in use • Low-battery LED: Visually alerts when there is 30 minutes of charge remaining • USB charging: Connects to any standard USB power source for "always on" usage   Specifications: Gain Adjustment Range -25 to 15 dB (in 1 dB steps) Maximum Input Level −9 dBV (mic gain @ -16 dB) Headphone Output 1/8" (3.5 mm) dual mono (will drive stereo headphones) Output Power Headphone: 17.5 mW (1 kHz @ 1% distortion, peak power, @ 16 Ω) Antenna Type Internal, spacial diversity, linear polarization Battery Type Rechargeable Li-Ion Battery Life Up to 9 hours (Calculated with a new battery. Runtimes vary depending on battery health) Charge Connector USB 3.0 Type A Housing Molded plastic Microphone Capsule R183B Temperature Range Recommended for Storage: 32 to 77°F (0 to 25°C) Dimensions (HxWxD) 0.9 x 1.75 x 4.5" (23 x 44 x 114 mm) Weight 3.8 oz (108 g) with batteries

Description: Details iShopping.pk brings you the best price for Shure Cardioid Boundary Transmitter (MXW6) with free shipping all over Pakistan.   The MXW6 Cardioid Boundary Transmitter from Shure is a bi-directional boundary transmitter with a built-in cardioid microphone designed for use with Shure's Microflex wireless conference system. The unit has an earphone output that allows you to monitor return audio, useful for translations or programming material. It has a concealed power switch for preventing accidental turn-off. It transmits your audio with AES 256-bit encryption for secure broadcasting. The MXW6's built-in rechargeable battery can provide up to 9 hours of operation.   Features: • Wide frequency response: Full-range audio for clear voice transmission • Bi-directional wireless: Enables return channel audio and real time remote control of all wireless microphone settings • Earphone output: Listen to audio from a return channel for translation, cueing, or program material • Concealed power switch: Prevents accidental powering off • Programmable mute button: Customize local or remote muting behavior per application, with options including push-to talk, push-to-mute, and external control • Encrypted wireless: AES 256-bit encryption for secure transmission • Wide working range: Reliable wireless coverage extends up to 160 feet (50 meters) • Out of range alert: Emits beeping sound when range limit is exceeded • Easy wireless linking: Assign the microphone to an Access Point channel by simply docking it in a Networked Charging Station and pressing "link" • Li-ion batteries: Smart lithium-ion internal batteries provide up to 9 hours of continuous use, charge to full in 2 hours, and enable remote monitoring over the network of remaining runtime and charge status in hours and minutes • Standby mode: Enabled remotely during periods of inactivity to significantly extend battery life when not in use • Low-battery LED: Visually alerts when there is 30 minutes of charge remaining • USB charging: Connects to any standard USB power source for "always on" usage   Specifications: Gain Adjustment Range -25 to 15 dB (in 1 dB steps) Maximum Input Level −9 dBV (mic gain @ -16 dB) Headphone Output 1/8" (3.5 mm) dual mono (will drive stereo headphones) Output Power Headphone: 17.5 mW (1 kHz @ 1% distortion, peak power, @ 16 Ω) Antenna Type Internal, spacial diversity, linear polarization Battery Type Rechargeable Li-Ion Battery Life Up to 9 hours (Calculated with a new battery. Runtimes vary depending on battery health) Charge Connector USB 3.0 Type A Housing Molded plastic Microphone Capsule R185B Temperature Range Recommended for Storage: 32 to 77°F (0 to 25°C) Dimensions (HxWxD) 0.9 x 1.75 x 4.5" (23 x 44 x 114 mm) Weight 3.8 oz (108 g) with batteries

Description: Details iShopping.pk brings you the best price for Shure Networked 2-Port Charging Station (MXWNCS2) with express shipping all over Pakistan.   The MXWNCS2 Networked 2-Port Charging Station from Shure is capable of charging MXW1 and MXW6 microphone transmitters (not compatible with MXW8 gooseneck microphones). It also links the microphones to access point channels and networks battery statistics to the control software.   Features: Charge Status Indicators 5-segment LEDs on the unit display charge status individually for every docked microphone transmitter Remote Charge Status Monitoring Ethernet connection to the system enables remote monitoring of battery charge status in hours and minutes via Microflex Wireless Control Software or third-party control systems Easy Transmitter Linking Assign docked wireless microphones to channels on an access point transceiver by simply pressing "Link Rapid Charge Times Reaches 50% charge in one hour and fully charges transmitters in two hours Overcharge Protection Smart recharging circuitry safeguards against battery damage and extends life cycles

Description: Details iShopping.pk brings you the best price for Shure 4-Port Networked Charging Station (MXWNCS4) with express shipping all over Pakistan.   The  MXWNCS4 4-Port Networked Charging Station  from Shure is designed to provide networked charging for up to 4 Microflex wireless transmitter units. Thanks to its networking abilities, the MXWNCS4 can display charge time info to networked computers in addition to being able to assign channels to docked transmitters.   Features: • Station accepts all Microflex Wireless transmitters • Charge status indicators: 5-segment LEDs on the unit display charge status individually for every docked microphone • Remote charge status monitoring: Ethernet connection to the system enables remote monitoring of battery charge status in hours and minutes via the control software or third party control systems • Transmitter linking: Assign docked wireless microphones to channels on an Access Point Transceiver by simply pressing "link" • Rapid charge times: Reaches 50% charge in one hour and fully charges transmitters in two hours • Overcharge protection: Smart recharging circuitry safeguards against battery damage and extends life cycles   Specifications: Charge Time MXW1, MXW6, MXW8: 50% = 1 hour, 100% = 2 hours  MXW2: 50% = 1.5 hours, 100% = 3 hours Network Interface 10/100 Mbps Ethernet Power Requirement 15 V DC @ 3.3 A maximum, supplied by external power supply (tip positive) Housing Molded plastic, cast zinc Dimensions (HxWxD) 2.7 x 7.5 x 7.25" (68 x 191 x 184 mm) Weight 3.7 lb (1.7 kg)

Description: Details iShopping.pk brings you the best price for Shure 2-Channel Access Point Transceiver (MXWAPT2) with express shipping all over Pakistan.   The MXWAPT2 from Shure is a two-channel access point transceiver that mounts to a wall or ceiling to manage encrypted, wireless audio connections with microphones. It can be used in meeting rooms and boardrooms when paired with Microflex wireless microphone systems and devices equipped with Dante digital networked audio (sold separately). Featuring AES 256-bit encryption for secure transmission and bi-directional wireless capabilities, the transceiver is powered via a single Ethernet cable and is the hub of the audio signal flow. Also, the transceiver manages the RF stability of each microphone in the group. It includes a paint cover, a mounting plate, and a USB memory stick.   Features: Easy Installation Includes wall / ceiling mounting plate and connects to the system over a single Ethernet cable (PoE compatible) Plenum-Rated Meets rigorous fire safety test standards for installation above drop ceiling tiles Scalable Configurations Multiple units can be combined to support configurations of up to 40 compatible channels (80 in Europe and select countries) Bi-Directional Wireless Provides return channel audio to wireless transmitters and enables real-time remote control of all wireless microphone settings Automated Frequency Coordination: Automatically scans available spectrum, coordinates clean frequency assignments, and moves channels away from unexpected interference Dante Digital Networked Audio Transports low-latency digital audio received from wireless microphones over Cat5e cable to any other Dante-equipped device Encrypted Wireless AES 256-bit encryption for secure transmission Selectable Output Power Optimize spectrum usage by selecting the appropriate wireless output power for the desired operating range Diagnostic LEDs LEDs offer easy visual reference to system activity and indicate power, wireless connection, and network audio status   Specifications: Network Interface RJ45: Gigabit Ethernet, Dante digital audio Plenum Rated UL 2043 Power Requirement Power over Ethernet (PoE) Class 0, 6.5 W Antenna Type Internal, spacial diversity, circular polarization Housing Molded plastic, cast zinc Dimensions (H x W x D) 1.4 x 6.7 x 6.7" (24 x 170 x 170 mm) Weight Not specified by manufacturer

Description: Details iShopping.pk brings you the best price for Bosch   CCS Chairman Unit for the CCS 900 Conference System Long  with express shipping all over Pakistan.   The Bosch CCS Chairman Unit is intended for use with the Bosch CCS 900 Conference System. Much like the Delegate Unit, The Chairman Unit features a built-in speaker and an adjustable gooseneck microphone. The Chairman Unit provides added muting control over delegates. Permanently or temporarily mute delegate microphones in order to establish control over dialog. The CCS Chairman Unit's loudspeaker mutes automatically while in use, features a red LED ring to indicate power and a headphone output with dedicated level control.   Features: • Incorporates all functions of the CCS‑Dx CCS delegate units (with the exception of the possible‑to‑speak functionality/LED) • Priority button for chairman microphone • Temporary or permanent muting of delegate microphones • Optional chime tone facility for preceding chairman announcements • Modern, unobtrusive styling to match the CCS‑Dx CCS delegate units   Specifications: Connections 1x 78.7 in (2m) cable terminated with a molded 7-pole circular male connector, for loop-through interconnection to delegate unit or control unit 1x 7-pole circular female connector for loop-through interconnection to delegate units 2x 0.14" (3.5mm) stereo headphone sockets Mount Tabletop (portable or fixed) Material Base: polymer Top: painted metal Color Charcoal Weight 2.2lb (1kg) Dimensions (HxWxD) 2.8 x 8.7 x 5.5" (71 x 220 x 140mm) Height with mic in horizontal position: 5.3" (134mm) Length: 19.2" (488mm)