Serial cable

Cable Length:80cm Color:As the picture show Size:6.7 x 3.5 x 1.5cm USB specification 2.0 compliant. Support Rs232 serial interface DB9. Support over1 Mbps data transfer rate. SupportWindows 98/2000/XP/8/10 and Mac OS9.0/OSX/Linux Support remote wake-up and power management. Suitable for PDA and Modem. Available for USB port. Low power consumption Product Weight:60g/pcs

pecification:Cable Color: White / BlackConnector 1: 9 Pin DB9 MaleConnector 2: 9 Pin DB9 FemaleSerial FeMale to FeMale cable.DB9 Pin Extension Cable with great technology can satisfy your daily demand.High-fidelity design, anti-interference ability, to reduce transmission signal attenuation, have a good effect. RS232 (9-pin Female) Cable 100% Brand New and high quality. DB9 female connectors on each end Straight through (not a null modem cable) Most used digtal satellite receivers upgrading. Support the RS 232 serial interface

pecification:Cable Color: White / BlackConnector 1: 9 Pin DB9 MaleConnector 2: 9 Pin DB9 FemaleSerial Male to Male extension cable.DB9 Pin Extension Cable with great technology can satisfy your daily demand.High-fidelity design, anti-interference ability, to reduce transmission signal attenuation, have a good effect.

UPS Communications Cable Smart Signalling 6'/2m - DB9 to RJ45UPS Cables that provide dedicated connections between APC UPSs and desktops, workstations, and serversAPC Genuine UPS SMX SMT Series Serial Cable RS-232 to RJ-50 940-0625AGenuine APC 940-0625a UPS Serial to Rj45 Communication CableConnector A: RJ45 (10 Pins)Connector B: SUB-D 9 (Smart signaling)Net Weight: 0.14KGRoHS: CompliantCord Length: 2metersKey FeaturesUPS Communications Cable Smart Signalling 6'/2m - DB9 to RJ45UPS Cables that provide dedicated connections between APC UPSs and desktops, workstations, and serversAvailabilityExtension CableProvides availability and reliability to let your UPS send signals over longer distances.Communication Computer Interface CableUPS cable provides dedicated serial/USB communication between the UPS and the server, independent of the network.

1.SATA Adpter USB 3.0 Cable External Hard Drive USB to Serial ATA Converter Hard Disk 6 Gbps for 2.5" or 3.5 " HDD/SSD. 2. This USB 3.0 to SATA Converter Cable connects any standard 2.5 or 3.5 inch SATA Hard Drive or Solid State Drive (SSD) to a computer through USB 3.0 ports. It's a ideal for you to backup files or upgrade your notebook hard driver.3. SATA specification Support speed up to 5Gbps; 4. Easy and quick access to external storage; 5. LED activity indicator; 6. Fully compatible with USB 3.0 and backwards compatible with USB 2.0/1.1; 7. Plug and play,hot-swapping; 8. Support Windows 98/2000/XP/Vista/7/8, Mac OS X.Comply with serial ATA2.0 standards.Compatible with USB port (1.0,1.1 &2.0) & SATA Hard disk (1.5 GB/S & 3 GB/s).Added USB2.0 independent power supply interface, support 2.5 "or 3.5 " high-capacity memory driver.Compatible with Windows 98se/Me/2000/XP/Vista/7/8/10, MAC OS X

You can easily connect your cellular phone / PDA / digital camera / modem / ISDN terminal adapter to your computer through an available USB 2.0 port. Setup is easy. Just plug your device in the adapter, connect it into your PC or Mac, and it’s ready to work. The cable adapter supports USB full speed communication and baud rates can be modified to desired setup. It supports automatic handshake mode, and is bus-powered.

You can easily connect your cellular phone / PDA / digital camera / modem / ISDN terminal adapter to your computer through an available USB 2.0 port. Setup is easy. Just plug your device in the adapter, connect it into your PC or Mac, and it’s ready to work. The cable adapter supports USB full speed communication and baud rates can be modified to desired setup. It supports automatic handshake mode, and is bus-powered.

Compliant with Serial ATA Specifications Fast data transfer rate of up to 150 Mbytes/Sec Meets current Serial ATA specifications and ensures maximum performance Specially designed to improve system airflow and routability

1.15Pin one to five, serial port one to five SATA hard disk extension cable 2. SATA interface hard disk, optical drive universal, support serial 2.5-inch / 3.5-inch hard disk and optical drive, one line multi-purpose, so that 1 SATA expands multiple SATA connectors, multiple hard drive chassis wiring 3. One-to-five output, reasonable use of redundant IDE interface on the supply, and make up for the shortage of SATA interface 4. The product is made of 18AWG positive marking wire, tinned copper wire core, permanently supports high current supply, supply is more stable and safe

Compact 7-pin (SATA data) and 15-pin (SATA power) SATA to USB 2.0 cable. Ideal cable for connecting hard drives to the USB port. The cable has the electronics necessary for the conversion from SATA to USB. It has an additional USB connector to obtain power from two USB ports. It does not require special drivers as it is recognized natively by Windows. USB type A male connector. Version 1 of the SATA cable can transfer 1.5 gigabytes of data per second. Version 2 of the SATA cable can transfer 3 gigabytes per second. Version 3 can transfer 6 gigabytes per second. This ability of the SATA cable to transfer data quickly makes these cables the desired device to connect these devices. If your have two hard drives on your computer, the SATA cable can be used to connect these drive together. Additionally, the SATA ports on the hard drives can be adjusted to determine which hard drive is the primary hard drive and which is the secondary hard drive. The SATA (also known as the "Serial Advanced Technology Attachment) cable comes with every computer that has been released as of June 2010. These cables are known for transferring data at high rates. (from 1.5 to 6 gigabytes per second). The cable comes with a few specific purposes that are used by every computer/Laptop for some form of data access.

Supports all standard DB9 serial ports / connectors Fully shielded Molded connectors Thumbscrews Wires are stright-through Wire gauge: 28 AWG Length: 6 feet

USB to SATA 2.5” SSD / HDD Cable Converter Interface: USB 2.0 & SATA Cable length: 23cm Suitable: 2.5'' SATA HDD Support: 2.5'' Mass storage class driver Color: Black Material: Copper + ABS Shell Weight: 35g Device Connector: Micro SATA Interface HDD Supporting ATA66/ 100/133 Maximum Transmission Speed: 480Mbps Maximum HDD Capacity: 2 TB (Not Confirmed, 1 TB Confirmed) Support system: Windows 7 8 10 (32-/64-bit) / Vista (32-/64-bit) / XP (32-/64-bit)/ Server 2003 & 2008 (32-/64-bit) with the latest Service Packs USB 2.0 transfer rate, speed up to 480Mbps/sec (Max) Support hot-swapping, plug & play Compliance with Serial ATA Specification Revision 2.6 Backward compatible with previous versions of USB ports (1.0 & 1.1) & SATA hard disks (1.5Gb/s) Driver free, simple operation, connect your SATA II or 2.5'' HDD to laptop/ desktop directly. (Only available for laptop, notebook hard drives and SSD, not available for 3.5'' desktop HDD) Max 600M/s transmission speed makes it possible to transfer or backup batch files faster than ever before. UASP-An advanced transmission technology. Compact and portable, ideal for taking along. 1 X USB 2.0 to SATA Cable

Compatible Device: Supports console device such as Cisco, TP-Link,Ubiquiti, Linksys,Huawei, HP ProCurve,and more; Compatible System: Windows, Mac OS, Linux, No needed driver for Windows 10/8, Mac OS.

​WRL-12577 Original SparkFun The BlueSMiRF Silver is the latest Bluetoothwireless serial cable replacement from SparkFun Electronics! This version of the popular BlueSMiRF uses the RN-42 module which has a bit less range than the RN-41 module used in the BlueSMiRF Gold. These modems work as a serial (RX/TX) pipe. Any serial stream from 2400 to 115200bps can be passed seamlessly from your computer to your target. Now Buy Online Shipping All Across Pakistan COMPANY: MATRIX ELECTRONICS CONTACT PERSON: FAIZAN MUNIR Mobile:03002785860 www.matrixelectronic.com Email : sales@matrixelectronic.com Email : info@matrixelectronic.com

Description: Details iShopping.pk brings you the best price for InFocus RealCam 2MP PTZ Camera (INA-PTZ-4) with express shipping all over Pakistan.   RealCam works with nearly all major platforms for video at up to 1080p (if allowed by that service). Use with Microsoft Skype for Business, Adobe Connect, Citrix GoToMeeting, LifeSize ClearSea, Avistar C3, Cisco Jabber, Skype, Polycom Real Presence Desktop, Radvision Scopia Desktop, and Google Hangout. RealCam also works with InFocus Mondopad and ConX Video Meeting software. Quiet pan/tilt action is ideal for capturing extensive areas. Access the precise settings you use most with 255 position presets for pan, tilt, and zoom, focus position, exposure mode, and white balance mode. Features a full function USB interface, with USB 3.0 and USB 2.0 compatibility, support audio and support UVC protocol. Control it with or USB UVC compatibility.   Features: • Full 1080p HD resolution • Pan, tilt and zoom using the included remote control • 72.5-degree wide-angle lens • USB 3.0 ultra-high speed interface • 12x optical zoom and 32x digital zoom • Use any PC with any software or OS via USB • Pan angle of -170° to +170° • Tilt angle of -30° to +30° • Power adapter required (not supplied) outside North America   Specifications: Accessories Included Power cord, USB cable, serial cable, remote Audio Input 1-ch: 3.5mm Audio Interface, Line In Backlight Compensation Supported Color System YUV 4:2:2 / H.264 / MJPEG Compatible Platforms (up to 1080p if allowed by service) Skype for Business, Adobe Connect, Citrix GoToMeeting, LifeSize ClearSea, Avistar C3, Cisco Jabber, Skype, Polycom Real Presence Desktop, Radvision Scopia Desktop, Google Hangout, InFocus Mondopad, ConX Video Meeting Control Input/Output 1xRS-232 IN: 8pin Min DIN, Max Distance: 30m, Protocol: VISCA/Pelco-D/Pelco-P 1xRS-232 OUT: 8pin Min DIN, Max Distance: 30m, Protocol: VISCA network use only Current Consumption 1.0A (Max) Digital Noise Reduction 2D&3D Digital Noise Reduction H & V Flip Supported Horizontal Angle of View 72.5° to 6.9° Horizontal Rotation Range (Pan)                                                                                                                                                                         ±170° (max. speed 100°/sec.) Image Freeze Supported Input Voltage DC 12V Lens 12x, f3.5mm ~ 42.3mm, F1.8 ~ F2.8 Minimal Illumination 0.05 Lux @ (F1.8, AGC ON) Operating System Windows 7, Windows 8, Windows 10, Mac OS X Operating Temperature F(C) -10°C ~ 40°C Power Connector JEITA type (DC IN 12V) Power consumption 12 W (Max) Preset Accuracy 0.1° Presets (number) 255 Product Dimensions 5 x 4.6 x 6.1 in. / 128.5 x 118 x 156.2 mm Regulatory Mariks Camera: FCC, CE, IC / Power Supply: CB, UL, CCC Scanning Mode Progressive Sensor 1/2.7”, CMOS, Effective Pixel: 2.07M Shipping Dimensions 9.8 x 9.8 x 10.2 in. / 250 x 250 x 260 mm Shutter 1/30s ~ 1/10000s Storage Temperature -40°C ~ 60°C USB 1xUSB3.0: Type B female jack USB Video Communication Protocol UVC 1.0 ~ UVC 1.5 UVC PTZ Supported Vertical Angle of View 44.8° to 3.9° Vertical Rotation Range (Tilt) ±30° (max. speed 69.9°/sec.) Video Format USB3.0: 1080p/60, 1080p/50, 1080p/30, 1080p/25, 720p/60, 720p/50, 720p/30, 720p/25 | USB2.0: 1080p/30, 1080p/25, 1080p/15, 1080p/10, 720p/30, 720p/25, 960x540p/30, 960x540p/25, 640x360p/60, 640x360p/50 Video S/N >/= 55dB Video System HD: 1080p/60, 1080p/50, 1080p/30, 1080p/25, 720p/60,720p/50, 720p/30, 720p/25 White Balance Auto, Indoor, Outdoor, One Push, Manual Zoom 12x optical, 32x digital Product Weight 2 lbs / 0.91 kglb. (0.91kg.)

ASUS PROART B660-CREATOR D4 MB LGA 1700 ATX motherboard Price in Pakistan Miscellaneous Included Accessories Q-Connector, 3 x M.2 rubber package, ACC Express Activation Key Card Cables Included 2 x Serial ATA cable ¦ 1 x DisplayPort cable Software Included Drivers & utilities, ASUS CPU-Z, ASUS AI Suite III, ASUS Turbo App, WinRAR, ASUS ProArt Creator Hub, Norton AntiVirus (Trial), CreationFirst Width 12 in Depth 9.6 in Supported RAM Max Size 128 GB Technology DDR4 Bus Clock 2400 MHz, 2133 MHz, 2800 MHz, 3000 MHz, 2666 MHz, 2933 MHz, 3400 MHz (O.C.), 3333 MHz (O.C.), 3466 MHz (O.C.), 3733 MHz (O.C.), 3600 MHz (O.C.), 3866 MHz (O.C.), 4000 MHz (O.C.), 4400 MHz (O.C.), 4266 MHz (O.C.), 4600 MHz (O.C.), 4800 MHz (O.C.), 3200 MHz, 5000 MHz (O.C.), 5333 MHz (O.C.) Supported RAM Integrity Check Non-ECC Registered or Buffered Unbuffered Features Dual channel memory architecture, Intel Extreme Memory Profiles (XMP) LAN Network Interfaces Gigabit Ethernet, 2.5 Gigabit Ethernet General Product Type Motherboard - ATX Chipset Type Intel B660 Processor Socket LGA1700 Socket Max Processors Qty 1 Compatible Processors (supports 12th Generation Intel Core / Pentium Gold / Celeron) Features BIOS Features UEFI BIOS Sleep / Wake Up Wake on LAN (WOL), wake on PME Hardware Features Jack retasking, ASUS Q-Design, ESD Guards, Q-DIMM, ASUS EZ DIY, Q-LED, Q-Slot, CrashFree BIOS 3, ASUS Q-Connector, audio jack detect technology, ASUS EPU (Energy Processing Unit), Intel Turbo Boost Technology 2.0, ASUS DIGI+ VRM, Preboot eXecution Environment (PXE), ASUS Stainless Steel Back I/O, LANGuard, overvoltage protection, ASUS Fan Xpert 4, ASUS SafeSlot, Intel Optane Memory Ready, ASUS 5X Protection III, M.2 heatsink, ASUS ProCool, pre-mounted I/O shield, Intel Turbo Boost Max Technology 3.0, ASUS Aura Sync, ASUS OptiMem II, Armoury Crate, 12+1 Phase Power Design, DIY Friendly Design, ASUS Control Center Express (ACC Express), M.2 Q-Latch, Quick Charge 4+ Audio Type HD Audio (8-channel) Compliant Standards High Definition Audio Expansion / Connectivity Expansion Slots 1 x CPU ¦ 4 x DIMM 288-pin ¦ 1 x PCIe 5.0 x16 ¦ 1 x PCIe 3.0 x16 (x4 mode) ¦ 1 x PCIe 3.0 x1 ¦ 1 x M.2 socket (Key E) Storage Interfaces SATA-600 -connectors: 4 x 7pin Serial ATA - RAID 0 / RAID 1 / RAID 10 / RAID 5 ¦ PCIe 4.0 -connectors: 2 x M.2 ¦ PCIe 3.0 -connectors: 1 x M.2 RAID Features Intel Rapid Storage Technology Interfaces 1 x HDMI ¦ 1 x DisplayPort input ¦ 4 x USB 3.2 Gen 1 ¦ 4 x USB 2.0 ¦ 1 x audio line-out - mini-jack ¦ 1 x microphone - mini-jack ¦ 1 x audio line-in - mini-jack ¦ 1 x LAN (Gigabit Ethernet) ¦ 1 x USB-C Gen2 ¦ 1 x LAN (2.5Gigabit Ethernet) ¦ 1 x audio line-out (rear) - mini-jack ¦ 1 x audio line-out (center/subwoofer) - mini-jack ¦ 1 x TOSLINK Internal Interfaces 4 x USB 2.0 - header ¦ 2 x USB 3.2 Gen 1 - header ¦ 1 x USB-C Gen 2x2 - header ¦ 1 x audio - header ¦ 1 x serial - header ¦ 1 x Thunderbolt - header Power Connectors 4-pin ATX12V connector, 24-pin main power connector, 8-pin ATX12V connector

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 128V Audio DSP Mixer with express shipping all over Pakistan.   The CONVERGE Pro 2 128V Audio DSP Mixer from ClearOne is a complete conferencing solution with 12 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in VoIP interface for 2 lines. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection. The mixer comes with built-in VoIP for VoIP conferencing. The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.   Features: Architecture • 12 mic/line inputs with AEC •  Built-in VoIP for 2 lines •  Built-in USB for PC-based conferencing Scalable Connectivity •  Standalone and daisy-chained system •  Stack up units up to 96 mic/line inputs •  Expansion bus C-Link with 64 channels •  P-Link bus to connect 6 peripherals Configuration & Management •  CONSOLE software •  Auto-discovery of devices •  Matrix View for entire system •  FlowView for visualized audio signal paths •  System monitoring and troubleshooting Audio Signal Processing •  Acoustic Echo Cancellation processing •  Distributed Echo Cancellation on every mic input •  Noise cancellation with Adaptive-Ambience •  Acoustic Intelligence with faster convergence •  DARE feedback elimination •  Microphone gating Flexible Control Options •  Dialer app for Windows, Mac, iOS, and Android •  Tabletop controller with a touch panel •  Wall controller with buttons •  Web-based controller Supports 3rd-party control modules   Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) VoIP Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation Audio: 5 lines (2 default + 3 lines through license), each line supporting 1+5 calls Sample Rate: 24 kHz Sample Bit Depth: 24-bit Codec: G.711 uLaw, G.711 ALaw, G.722 Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: Proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 48T Audio DSP Mixer with express shipping all over Pakistan.     The CONVERGE Pro 2 48T Audio DSP Mixer from ClearOne is a complete conferencing solution with 4 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in Telco interface for teleconferencing. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection.   The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.     Features: Architecture • 4 mic/line inputs with AEC •  Built-in Telco with ClearEffect processing •  Built-in USB for PC-based conferencing Scalable Connectivity •  Standalone and daisy-chained system •  Stack up units up to 96 mic/line inputs •  Expansion bus C-Link with 64 channels •  P-Link bus to connect 6 peripherals Configuration & Management •  CONSOLE software •  Auto-discovery of devices •  Matrix View for entire system •  FlowView for visualized audio signal paths •  System monitoring and troubleshooting Audio Signal Processing •  Acoustic Echo Cancellation processing •  Distributed Echo Cancellation on every mic input •  Noise cancellation with Adaptive-Ambience •  Acoustic Intelligence with faster convergence •  DARE feedback elimination •  Microphone gating Flexible Control Options •  Dialer app for Windows, Mac, iOS, and Android •  Tabletop controller with a touch panel •  Wall controller with buttons •  Web-based controller •  Supports 3rd-party control modules     Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Amplifier Output Speaker Output Port: Dual binding posts Audio: 2 x Channel Output Power: Maximum 10 W, 8 Ohms load Frequency Response: 20 Hz to 22 kHz @ +10 dBu, +/- 0.5 dBu THD + N: 20 Hz to 22 kHz @ +10 dBu, 1 W, Dynamic Range: 20 Hz to 22 kHz @ 20 dB, >102dB, with 20 kHz digital low pass filter Crosstalk: Channel to Channel, stimulus at 20 dBu, 10 W output to receptor 8⿦ load, 20 Hz to 22 kHz, Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 128T Audio DSP Mixer with express shipping all over Pakistan.   The CONVERGE Pro 2 128T Audio DSP Mixer from ClearOne is a complete conferencing solution with 12 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in Telco interface for teleconferencing. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection. The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.   Features: Architecture 12 mic/line inputs with AEC Built-in Telco with ClearEffect processing Built-in USB for PC-based conferencing Scalable Connectivity Standalone and daisy-chained system Stack up units up to 96 mic/line inputs Expansion bus C-Link with 64 channels P-Link bus to connect 6 peripherals Configuration & Management CONSOLE software Auto-discovery of devices Matrix View for entire system FlowView for visualized audio signal paths System monitoring and troubleshooting Audio Signal Processing Acoustic Echo Cancellation processing Distributed Echo Cancellation on every mic input Noise cancellation with Adaptive-Ambience Acoustic Intelligence with faster convergence DARE feedback elimination Microphone gating Flexible Control Options Dialer app for Windows, Mac, iOS, and Android Tabletop controller with a touch panel Wall controller with buttons Web-based controller Supports 3rd-party control modules   Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: Proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

WRL-11812 SPARKFUN This is a simple to use, USB to serial base unit for the Digi XBee line. This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. Plug the unit into the XBee Explorer, attach a mini USB cable, and you will have direct access to the serial and programming pins on the XBee unit. The highlight of this board is an FT231X USB-to-Serial converter. That’s what translates data between your computer and the XBee. There’s also a reset button, and a voltage regulator to supply the XBee with plenty of power. In addition, there are four LEDs that’ll help if you ever need to debug your XBee: RX, TX, RSSI (signal-strength indicator), and power indicator. This board also breaks out each of the XBee’s I/O pins to a pair of breadboard-compatible headers. So if you want to make use of the XBee’s extended functionality, you can solder some header pins into those, or even just solder some wire. Now Buy Online Shipping All Across Pakistan COMPANY: MATRIX ELECTRONICS CONTACT PERSON: FAIZAN MUNIR Mobile:03002785860 www.matrixelectronic.com Email : sales@matrixelectronic.com Email : info@matrixelectronic.com

  Compaq Evo D500 specifications General TypePersonal computer Recommended UseSmall business, Corporate business Product Form FactorDesktop slimline Built-in DevicesNone Width13.1 in Depth14.4 in Height3.9 in Weight20.1 lbs ColorCarbon LocalizationEnglish / United States Processor TypeIntel Pentium 4 1.7 GHz Installed Qty1.0 Max Supported Qty1.0 UpgradabilityUpgradable Mainboard Chipset typeIntel 845 Data bus speed400.0 MHz Cache Memory TypeL2 cache - Advanced Transfer Cache Installed Size256.0 KB (installed) / 256.0 KB (max) Environmental Parameters Min operating temperature50.0 F Max operating temperature95.0 F Operating humidity range10 - 90% RAM Installed Size128.0 MB / 3.0 GB (max) TechnologySDRAM Memory Speed133.0 MHz Form FactorDIMM 168-pin Upgrade RuleMax 1 GB module Storage Controller Type1.0 x IDE - Integrated - PCI Controller Interface TypeATA-100 RAID LevelNone Storage Controller (2nd) TypeNone Storage Floppy Drive3.5" 1.44 MB floppy Hard Drive1.0 x 20.0 GB - Standard - ATA-100 - 7200.0 rpm Hard Drive (2nd)None Optical Storage TypeCD-ROM - IDE Read Speed48x Write SpeedN/A Rewrite SpeedN/A Media Load TypeTray Optical Storage (2nd) TypeNone Storage Removable TypeNone Monitor Monitor Typenone. Graphics Controller TypeAGP 4x - Plug-in card Graphics Processor / VendorNVIDIA Vanta Video Memory16.0 MB / 16.0 MB (max) SDRAM Supported Display GraphicsUXGA (1600x1200), VGA (640x480), SVGA (800x600), SXGA (1280x1024), HDTV (1920x1080), XGA (1024x768) Video Output SupportedNone Digital Video StandardNone Audio Output TypeSound card - PCI - Integrated Signal ProcessorIntel 845 Sound Output ModeStereo Max Sample Rate48.0 KHz Compliant StandardsSound Blaster 16/Pro, Sound Blaster, AC '97 Speaker(s)None Input Device TypeMouse, Keyboard Audio Input TypeNone Telecom ModemNone Networking NetworkingNetwork adapter - PCI - Integrated Data Link ProtocolEthernet, Fast Ethernet Network / Transport ProtocolTCP/IP, NetBEUI/NetBIOS, IPX/SPX, IP/IPX Remote Management ProtocolDMI Compliant StandardsIEEE 802.3, IEEE 802.3u Cluster Cluster Storage ControllerNone Printer TypeNone Expansion / Connectivity Expansion Bays1.0 (total) / 0.0 (free) x Front accessible - 3.5" x 1/3H, 1.0 (total) / 0.0 (free) x Front accessible - 5.25" x 1/2H, 1.0 (total) / 0.0 (free) x Internal - 3.5" x 1/3H Expansion Slot(s)1.0 (total) / 2.0 (free) x Memory - Half-length, 3.0 (total) / 2.0 (free) x AGP 4x - Socket 478, 2.0 (total) / 0.0 (free) x PCI - DIMM 168-pin, 1.0 (total) / 0.0 (free) x Processor - Full-length Interfaces1.0 x Audio - Generic - 9 pin D-Sub (DB-9), 1.0 x Network - Line-in - 6 pin mini-DIN (PS/2 style), 1.0 x Microphone - Generic - Mini-phone stereo 3.5 mm, 1.0 x USB - Input - 4 pin USB Type A, 1.0 x Display / video - Ethernet 10Base-T/100Base-TX - RJ-45, 4.0 x Mouse - Output - 6 pin mini-DIN (PS/2 style), 1.0 x Parallel - IEEE 1284 (EPP/ECP) - Miniphone mono 3.5 mm, 1.0 x Headphones - Line-out - 15 pin HD D-Sub (HD-15), 1.0 x Keyboard - RS-232 - 25 pin D-Sub (DB-25), 1.0 x Serial - VGA - Mini-phone stereo 3.5 mm, 2.0 x Audio - Mini-phone stereo 3.5 mm Miscellaneous FeaturesLED display, System password, Security lock slot (cable lock sold separately), Kensington MicroSaver security system, USB port control, Hard drive password, Serial port I/O control, Power-on password, Administrator password, Parallel port I/O control Power Device TypePower supply PowerAC 120/230 V (50/60 Hz) Power Provided175.0 Watt Compliant StandardsEPA Energy Star Operating System / Software OS ProvidedMicrosoft Windows 98 Second Edition SoftwareCompaq Insight Manager, Novell ZENworks, Altiris eXpress, Microsoft Internet Explorer, Compaq Intelligent Manageability Agent, Drivers & Utilities Manufacturer Warranty Service & Support3 years warranty Service & Support DetailsTechnical support - Phone consulting - 3 years - N/A, Limited warranty - Parts and labor - 3 years - On-site

USB to SATA 2.5” SSD / HDD Cable Converter Interface: USB 2.0 & SATA Cable length: 23cm Suitable: 2.5'' SATA HDD Support: 2.5'' Mass storage class driver Color: Black Material: Copper + ABS Shell Weight: 35g Device Connector: Micro SATA Interface HDD Supporting ATA66/ 100/133 Maximum Transmission Speed: 480Mbps Maximum HDD Capacity: 2 TB (Not Confirmed, 1 TB Confirmed) Support system: Windows 7 8 10 (32-/64-bit) / Vista (32-/64-bit) / XP (32-/64-bit)/ Server 2003 & 2008 (32-/64-bit) with the latest Service Packs USB 3.0 transfer rate, speed up to 5 Gbps (Max) Support hot-swapping, plug & play Compliance with Serial ATA Specification Revision 2.6 Backward compatible with previous versions of USB ports (2.0,1.0 & 1.1) & SATA hard disks (1.5Gb/s) Driver free, simple operation, connect your SATA II or 2.5'' HDD to laptop/ desktop directly. (Only available for laptop, notebook hard drives and SSD, not available for 3.5'' desktop HDD) Max 600M/s transmission speed makes it possible to transfer or backup batch files faster than ever before. UASP-An advanced transmission technology. Compact and portable, ideal for taking along. 1 X USB 3.0 to SATA Cable

TX628 is an innovative biometric fingerprint reader for Time & Attendance applications, offering unparalleled performance using an advanced algorithm for reliability, precision and excellent matching speed. The TX628 features the fastest commercial-based fingerprint matching algorithm and ZK high-performance, high-image quality optical fingerprint sensor. The 3 inch TFT can display more information vividly, including fingerprint image quality and verification result etc. TCP/IP communication is standard and make sure the data transmission between terminal and PC can be easily done within several seconds. Features Color TFT screen with GUI Interface for ease of use ZK Optical Sensor 1 touch a-second user recognition Stores 3,200 templates and 80,000 transactions Optional integrated proximity or smart card reader Built-in Serial and Ethernet ports Built-in USB port optional, allows for manual data transfer when network isn't available Built in bell scheduling Real-time 1-touch data export 3rd party hosted & non-hosted applications Audio-Visual indications for acceptance and rejection of valid/invalid fingers SDK available for OEM customers and software developers Specifications : Fingerprint Capacity: 3200 templates Transaction Capacity:80,000 Sensor: ZK Optical Sensor Algorithm Version: ZK Finger v10.0 Communication: RS232/485, TCP/IP,USB-host,USB-client Optional Functions:Webserver,Printer,9 digit user ID Display: 3 inches TFT Screen Power Supply: 5V DC 2A Operating Temperature: 0 °C- 45 °C Operating Humidity:20%-80% Dimension: 180*135*37 mm Gross Weight:0.90 kg Package List: 1 x Fingerprint time attendance 1 x Installation screws kit 1 x 100~240V US plug power adapter (140cm) 1 x Software CD 1 x Chinese manual 1 x USB cable (140cm) 1 x Network cable (40cm)

SMS Caster E-Marketer (R) V 3.6. With Life Time Register Software (Product Key) & All Pakistan Major Cities of 2 crore active mobile numbers data. Delivery and installation services free in all Lahore city. With Life Time Warranty. *Send thousands of SMS easily from the computer. *Receive incoming SMS into the computer (2-way SMS).*No registration, no credit prepay, no SMS gateway required. *Support Long SMS, Flash SMS, SMS Mail Merge. *Use your existing Nokia, Sony Ericsson or Motorola mobile phone!. Key Features: Convenient: Send & receive SMS right from your computer. Do not relies on an Internet SMS gateway. Low cost: No registration, no pre-pay and no need to buy SMS credit before start. Utilize your existing mobile phone. Phone book: Manage your contact list for different marketing campaigns into project files, with grouping support. Import existing data from a wide varieties of comma separated value and text file with the “Import Wizard”. Send personalized SMS: Send personalized SMS content to each recipient by inserting data from the phone book automatically. Unlimited SMS: You can send and receive unlimited number of sms during license period. Send in different languages: Support GSM 7-bit and UCS2 Unicode encoding with Auto Encoding Selection. Compose your SMS in many different languages: German, French, Dutch, Greek, Italian, Portuguese, Chinese, Japanese, Korean, Arabic, Cyrillic, etc. Responder: Auto reply to incoming SMS for pre-defined keywords and reply messages. (Enterprise Edition Only) Details: SMS Caster E-Marketer (R) is easy-to-use yet powerful SMS message broadcasting software for e-marketing. It allows you to send marketing & advertising SMS and receive response SMS from the computer.If differs from other desktop texting software which relies on an Internet SMS gateway. Instead, use your existing mobile phone, GSM modem or cellular terminal and connect it to the computer. The connection can be done via a USB data cable, serial data cable or Bluetooth COM port.Designed with bulk broadcasting in mind, SMS Caster (R) helps you manage your marketing campaigns and send customized messages to your target groups. Since SMS is fast and cost effectiveness, messages like promotion, reminder, alert, special notice or statement are well suited to be delivered by using SMS Caster E-Marketer (R).

Description: Details iShopping.pk brings you the best price for ClearOne Tabletop Controller for Converge Pro with express shipping all over Pakistan.   An intuitive, cost-effective tabletop controller for ClearOne's Converge™ Pro and XAP® platforms. It greatly simplifies control of an audio conference without the need for a touch-screen panel control system. User-definable keys offer simple control of basic audio and presentation functions.   Features: • Dial Pad: 12 total buttons •  Volume Controls: Up, Down •  Call Functions: On/Off, Flash, Redial, Mute •  User-defined Keys: 5 buttons •  LCD Display Type: 3-line 16-character matrix •  Internal Memory •  Serial Interface to other subassemblies •  Master Reset •  Tethered female RJ-11 female connector •  Cable Type: CAT 3, CAT 5, or CAT 6 cabling •  Cable Gauge: 24 gauge •  Maximum Distance: 150 feet between mixer and Tabletop Controller •  Communications Type: DTE •  Physical: RS-232 •  Baud Rate: Selectable (38.4 or 57.6K baud)   Specifications: Physical Characteristics Form Factor Desktop Height 2.8" Width 10.5" Depth 4.5" Weight (Approximate) 2 lb Miscellaneous Compatibility ClearOne Converge Pro Conferencing Platform ClearOne XAP Professional Conferencing Platform

i want to sale it bcz i want to run my setup on cable.product description is in images. Details Product code RBGrooveA-52HPn CPU nominal frequency 600 MHz CPU core count 1 Size of RAM 64 MB 10/100 Ethernet ports 1 10/100/1000 Ethernet ports 0 MiniPCI slots 0 MiniPCI-e slots 0 Wireless chip model AR9342-BL1A Wireless standards 802.11a/b/g/n Number of USB ports 0 Power Jack 0 PoE in Yes Voltage Monitor Yes PCB temperature monitor Yes CPU temperature monitor No Dimensions 177x44x44mm, 193g Operating System RouterOS Operating temperature range -30C to +70C License level 4 Antenna gain DBI 6 Current Monitor No CPU AR9342-BL1A Max Power consumption Up to 0.19A at 24V (4.56W) SFP ports 0 SFP+ ports 0 Number of chains 1 Serial port None

Raspberry Pi Camera Noir Module Description: This 5mp IR (Infrared) camera module is capable of 1080p video and still images and connects directly to your Raspberry Pi. Similar to the non-IR version Raspberry Pi Camera, connect the included ribbon cable to the CSI (Camera Serial Interface) port on your Raspberry Pi, boot up the latest version of Raspbian and you are good to go! Now Buy Online Shipping All Across Pakistan COMPANY: MATRIX ELECTRONICS CONTACT PERSON: FAIZAN MUNIR Mobile:0 3002785860 w w w .matrixelectronic . com Email : sales @ matrixelectronic . com Email : info @ matrixelectronic . com

The Zebra GK420d monochrome desktop direct thermal label printer comes equipped with Ethernet and USB ports, prints 5" per second in black at 203 dpi, and can be used to print labels, tags, receipts, or other media up to 4.09" wide. Direct thermal printers use heat instead of ink and are typically smaller, quieter, faster, and more energy-efficient than dot-matrix printers. The GK420d has a maximum print speed of 5" per second at 203 dpi (dots per inch) and prints labels up to 39” long. The 32-bit processor combined with the 8 MB of SDRAM memory and 4 MB of flash memory offers fast first label printing with extensive media graphics. The Ethernet port enables the printer to be connected to a wired computer network (Ethernet cord sold separately). A USB port and an included USB cable provide connectivity to a computer or another device. EPL and ZPL programming languages are standard. The GK420d printer's double-walled casing is made of ABS (acrylonitrile butadiene styrene), which helps resist impact. An open-access design facilitates media loading. A reflective sensor allows the printer to identify the gaps, holes, notches, or black marks between labels to print the labels accurately. A transmissive sensor enables it to detect when a roll of media has run out. The auto-detectable power adapter can accept AC power between 100 and 240 volts. This printer is suitable for use with black bar, black mark, continuous, continuous receipt, die-cut, fanfold, gap, notched, perforated, receipt, roll-fed, tag, or tag stock media (all sold separately). The maximum outside diameter for rolls is 5". Specifications Resolution 203 dpi (8 dots/mm) Memory 8 MB SDRAM; 4 MB flash Print Width 4.09" maximum Print Length 39" Print Speed 5"/second Media Sensors Reflective, transmissive Label and Liner Width Range 0.75" to 4.25" Label and Liner Length Range 0.38" to 39" Maximum Roll Diameter 5" Core Diameter 0.5", 1.0", and 1.5" Media Thickness Range 0.003" to 0.0075" Media Types Black bar, black mark, continuous, continuous receipt, die-cut, fanfold, gap, notched, perforated, receipt, roll-fed, tag, tag stock Operating Temperature 40 to 105 degrees F Operating Humidity 10 to 90 percent non-condensing Storage Temperatures -40 to 140 degrees F Storage Humidity 5 to 95 percent non-condensing Voltage and Frequency Auto-detecting 100-240 VAC, 50-60 Hz Dimensions 6 x 6.75 x 8.25 inches (H x W x D)* Weight 3.1 lb. * H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Label printers, also known as label makers, can be used to print labels, tags, receipts, and other similarly sized media. Direct thermal and thermal transfer label printers use heat instead of ink to print on coated thermal media. A parallel, serial, or USB port allows a label printer to be connected to a computer. An Ethernet port or wireless capabilities may enable it to be connected to a computer network. Label printers can be used in a variety of commercial environments, including warehouses, laboratories, retail stores, health care facilities, and shipping and receiving facilities.

MikroTik's fastest router has now become even better - the new CCR1036-8G-2S+ now has two SFP+ ports for 10G interface support (SFP+ module available separately). It uses the same 36 core Tilera CPU as their other CCR1036 model, and delivers the same performance, but now, ten gigabit links are possible. The device comes in a 1U rack mount case, has two SFP+ ports, eight Gigabit Ethernet ports, a serial console cable and a USB port. Product Features • 36 Core networking CPU • 12 Mbps total on-chip cache • 8Mbps standard forwarding • 41.5MBps fastpath forwarding • Up to 28Gbit/s throughput • 1U Rack mount Case • Color touchscreen LCD display • Ports directly connected to CPU http://dreamsnw.com/ccr1036-8g-2s Avalaible at Dreams Network & Technology (Pvt) Ltd. Contact: info@dreamnw.com LHR: 04235784892 KHI: 02134710763, 02134711677, 02134721416

CCR1036-12G-4S is an industrial grade router with cutting edge 36 core CPU. Unprecedented power and unbeatable performance. This device comes in a 1U rackmount case, has (4) SFP ports, (12) Gigabit ethernet ports, a serial console cable, and a USB port. The CCR1036-12G-4S has (2) SODIMM slots, by default is shipped with 4GB of RAM, but has no memory limit in RouterOS (will accept and utilize 16GB or more). Product Features • 36 Core networking CPU • 12 Mbytes total on-chip cache • 8 mpps standard forwarding • 24 mpps fastpath forwarding • Up to 16Gbit/s throughput • 1U Rackmount Case • Color touchscreen LCD display • Ports directly connected to CPU http://dreamsnw.com/ccr1036-12g-4s Avalaible at Dreams Network & Technology (Pvt) Ltd. Contact: info@dreamnw.com LHR: 04235784892 KHI: 02134710763, 02134711677, 02134721416