Safety supervisor

Institute of professional education and development 0313-4706988 IPED provide Best Safety officer course in all over the Pakistan. We are Providing education service since 2000 in Rawalpindi and Islamabad. IPED is directly affiliated with Govt of Pakistan. Our diploma can be easily attested by any Govt department/ embassy/ foreign office. We are affiliated with two states boards ( SDC, TTB, TTPC, SDA) you can check our verification through these boards websites and at our website. 0313-4706988 www.ipedpak.com www.ipedpk.com we provide more than 3000 diploma courses . Our special fields are Safety engineering, Civil engineering, Petroleum engineering, Oil and Gas engineering, Drilling, Reservoir, Fire safety, Construction Safety, IT, DIT, CIT, Information technology , Management Courses, Quality control , Quality assurance, Lead Auditor course, Computer accounting, Software engineering, accounting and finance, Mass Communication, Program languages, Safety officer course, Safety supervisor course, safety inspector course, IOSH MS, NEBOSH IGC, NEBOSH IOG, Civil surveyor, Land Surveyor, Quantity surveyor, Total Quality Control Management, We provide a wide range of different skill based diploma courses, we provide 1 year , 2 year , experience based, distance learning, education standard. Office# 252, 2nd Floor Umair plaza, 6th Road Rawalpindi Pakistan hostel facility also available with 3 time good meal, laundry, internet. Contact: 0313-4706988

IASP Construction Safety Course in Rawalpindi Pakistan,IASP Construction Safety Course in Rawalpindi Pakistan,international college technical education in rawalpindi pakistan,professional iasp construction safety course in rawalpindi islamabad pakistan,best training institute in rawalpindi,construction safety supervisor diploma course in rawalpindi islamabad pakistan,best training institute in rawalpindi punjab pakistan,admission open for boys and girls advance course in rawalpindi pakistan,admission open for boys and girls new session coming soon Office # 27, Second Floor, Maryam Shadi Hall Plaza (Airies Plaza), Shamsabad, Murree Road,Rawalpindi, Pakistan 0311-5193625, 0092-335-4176949,Construction is one of the nation’s largest industries. There are more than 702,000 construction companies in the United States. Employees in construction are more prone to injuries than other types of workers. In a recent year, cases of job-related injury and illness in construction were 7.1 per 100 full-time employees, significantly higher than the 5.3 rate for all private businesses.applies to most construction activities. It states that the employer must instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to his work environment to control or eliminate any hazards or other exposure to illness or injury.By the end of the course, participants would be familiar with the safety and health hazards in the construction industry and be equipped with the abilities to implement and audit the Safety Management System.Workplace Hazardous Materials Information Systems 2015 (WHMIS 2015) is a globally harmonized communication system dealing with controlled products and includes three main components: labels, safety data sheets (SDS) and worker education.The Construction Safety Officer Training program continues from the Trade Safety Coordinator program to provide students with a deeper understanding of the specifics of safety and hands-on skills. We will look at specific parts of the OHS Regulation and specific sections of the WCA to ensure that our students are knowledgeable when going to a worksite and are able to deal with topics such as Fall Protection, Confined Space, Electrical Safety and Occupational Hygiene.Construction is one of the most hazardous professional occupations. Construction workers are exposed to risks that office, shop, or even manufacturing workers do not have to face. Health and lives are at stake. So, indirectly, is job security: the hidden costs of construction industry accidents can hurt a construction company financially and jeopardize its employment in general. Safety training and education are therefore of paramount importance. Online construction safety courses offer easy access at any time. Workers can pace their learning to suit their schedules.Besides general construction safety coverage, specialized online courses are also available. Specific topics covered include safety when working with concrete and masonry, confined space entry, excavations, fall protection, scaffolds, and electrical safety. They can be valuable in helping prevent accidents in environments where such risks are especially high. Electrical Safety for Trade WorkersLock OutExcavation and ShoringStructural ComponentsFall ProtectionCranes/RiggingConfined SpaceIndustrial HygieneRespiratory Protection/PPEBullying and HarassmentWHMIS 2015Role of the AttendantTraffic Control for CSOsThe AssociationsExpectations for CSOs.IOSH Safety, Health and Environment for Construction Site Managers is intended for construction site managers that work in the the UK or abroad.HSQE Ltd are proud to be the first company to produce a 100% online version of the course and to have it fully approved by IOSH.Our course can be started immediately and it includes all you need to complete this highly regarded course – there are no hidden charges.On successful completion, students receive a genuine Safety, Health and Environment for Construction Site Managers Certificate issued by IOSH.

1 and 2 year Govt Diploma Courses and Certificates in 1 Month Govt Registered Affiliated with SDC & TTB Govt of Pakistan Safety officer Safety inspector Safety supervisor Osha Iosh Nebosh IGC Petroleum Engineering Drilling Oil and Gas Civil Engineering Civil surveyor Quantity surveyor Autocad 2D/3D Accounting and finance Peach tree Quick Bool Tally

Qc Civil Supervisor Training Course in Charsadda Chitral 3115193625 , Qc Civil Supervisor Training Course in Charsadda Chitral 3115193625 , This program provides skills and knowledge in the field of Welding Inspection, Quality Control (QC) and Quality Assurance (QA). This program has been developed in co-operation with Industry in order to meet the increasing demands for professionals to carry out a number of QA/QC Inspection-related tasks, including testing products at specific stages to ensure acceptable qualities such as dimensional, performance, mechanical, electrical and chemical characteristics. You also learn how to record test data such as procedure qualification records, pressure testing, visuals, non-destructive and destructive examination testing, RT film review, equipment calibration, welding procedure specifications, welder and welding operator qualifications and basic coating inspection. Welding Inspection and Quality Control professionals are proficient in interpreting engineering drawings, diagrams and formulas. This profession requires good oral and written communication and strong computer and math skills.Rawalpindi, Islamabad, Lahore, Karachi, Gilgit, Skardu, Ghangche, taxila, Shigar, Astore, Diamer, Ghizer, Kharmang, Gultari, Rondo, Hunza Nagar, Gupi, Azad Jammu and Kashmir, Muzaffarabad, Mirpur, Bhimber, Kotli, Rawlakot, Bagh, Bahawalpur, Bhakkar, Chakwal, Chiniot, Dera Ghazi Khan, Faisalabad, Gujranwala, Gujrat, Hafizabad, Jhang, Jhelum, Kasur, Khanewal, Khushab, Layyah, Lodharan, Mandi-Bahuddin, Mianwali, Multan, Muzaffargarh, Nankana Sahib, Narowal, Okara, Pakpattan, Rahim Yar Khan, Rajanpur, Sahiwal, Sargodha, Sheikhupura, Sialkot, Toba tek Singh, Vehari, Attock, Taxila, Wah Cantt, Rawalpindi, Balochistan, Khyber-Pakhtunkhwa, Punjab, Sindh, Gilgit Baltistan, Turbat, Sibi, Chaman, Lasbela, Zhob, Gwadar, Nasiraba, Jaffarabad, Hub, Dera Murad Jamali, Dera Allah Yar, Khyber-Pakhtunkhwa, Peshawar, Mardan, Abbottabad, Mingor, Kohat, Bannu, Swabi, Dera Ismail Khan, Charsadda, Nowshera, Mansehra, Hyderabad, Sukkur, Larkana, Nawabshah, Nanak wara, Mirpur Khas, Jacobabad, Shikarpur, Khairpur, Pakistan.Experienced Based Diploma in Ac Technician ,Electronic , Mechanical , Plumbing , Auto Electrician , Efi Auto Electrician , Civil Surveyor , Quantity surveyor civil lab material testing , Best Institute in Rawalpindi islamabad Pakistan Lahore , Lowest fee course in pakistan , lowest fee professional practical training course in pakistan rawalpindi peshawar kashmir bagh lahore islamabad kahuta chakwal rahimyar khan gujarat gujarawala multan , attock Best institute in rawalpindi professional teacher and qualified staff.Dubai , Abu Dabi , Muscat , Oman , Doha , Qatar ,South Africa , Saudia Arabia , kawat , Behrain , Kotli Sattian , Murree , UK , UAE , Sharja,Civil Technology Courses Diploma in Civil Surveyor Diploma in Quantity Surveyor Diploma in Civil Draftman Diploma in Civil Lab Technician Diploma in Civil Architecture Diploma in Civil Engineering One Year Diploma in Civil Engineering Two Years OSHA Construction Civil Safety Electrical Technology Courses Diploma in Electrical Engineering one year Diploma in Electrical Engineering Two years Electrician Course in Rawalpindi Electrician Course in Lahore Electrician Course in Peshawar Telecommunication Technology Courses Diploma in Telecommunication One year Diploma in Telecommunication Two years Diploma in Optical Fiber Diploma in CCTV technician Mechanical Technology Courses Diploma in Mechanical Technology One Year Diploma in Mechanical Technology Two Years Diploma in Project Management (DPM) Diploma in Hotel Management Diploma in Hospitality Management Diploma in Quality Assurance (QA) Diploma in Quality Control (QC) Diploma in Total Quality Management (TQM) Diploma in Import & Export Management Diploma in College and University Management Diploma in Auditing Diploma in Accounts Management Diploma in Fast Food Management Diploma in Flood Risk Management Diploma in Guest House Management Diploma in International Tourism Management Diploma in Energy Management Diploma in Library Management Diploma in Education Planning and Management Diploma in Management Information System (MIS) Diploma in Software Project Management Diploma in Business Administration and Management Diploma in Office Administration & Management Diploma in Interior Designing Diploma in BMS (Building Management System) Hospitality Management Course in rawalpindi Hospitality Management Course in lahore Hospitality Management Course in peshawar Building Management System (BMS) Course in rawalpindi Building Management System (BMS) Course in lahore Building Management System (BMS) Course in peshawar Quality Assurance Quality Control Course in rawalpindi Quality Assurance Quality Control Course in lahore Quality Assurance Quality Control Course in peshawar Hotel Management Course in rawalpindi Hotel Management Course in lahore Hotel Management Course in peshawar Iosh MS OSHA 30 USA Safety Course IADC Rig Pass Icertosh (International Certificate in Occupational Safety and Health) Safety Officer IRCA, ISO Certifications Nebosh IGC Course in Rawalpindi Nebosh IGC Course in islamabad Nebosh IGC Course in peshawar Nebosh IGC Course in karachi Nebosh IGC Course in lahore Nebosh IGC Course in pakistan Basic IT Course (MS Office) Computer Hardware Course Computerized Accounting CIT (Certificate in information Technology) Web & Graphic Designing Computer languages Software Engineering AutoCAD (Civil, Mechanical, Electrical) 3D Studio Max (Advanced) Computer Networking Web Development Information Technology (PG-DIT) Project Managment Professional (PMP) Prima Vera (Project Management) DIT (Diploma in information technology) Revit 3D Cad Course Microstation Cad Course Shorthand Professional Course in Islamabad Shorthand Professional Course in Rawalpindi Shorthand Professional Course in Pakistan IATA Air Ticketing & Reservation Course in Islamabad IATA Air Ticketing & Reservation Course in Rawalpindi IATA Air Ticketing & Reservation Course in Pakistan Professional Cooking Course in Islamabad Professional Cooking Course in Rawalpindi Professional Cooking Course in Pakistan EFI Auto Electrician Course in Rawalpindi EFI Auto Electrician Course in Islamabad EFI Auto Electrician Course in Pakistan Civil 3D Course in Islamabad Civil 3D Course in Rawalpindi Civil 3D Course in Pakistan GIS Geographic Information Systems Course in Islamabad GIS Geographic Information Systems Course in Rawalpindi GIS Geographic Information Systems Course in Pakistan

Gravity Skills offer the best IOSH Certification facilities IOSH Safety Training Courses which helps to become a better supervisor and a safety officer.

WHAT IS NEBOSH The National Examination Board in Occupational Safety and Health (NEBOSH is a UK-based examination board offering qualifications and courses in health, safety, environment and well-being management. I twas founded in 1979 and has charitable status. It offers a range of qualifications and courses from introductory to professional level. Around,000 people worldwide held a NEBOSH qualification as of 2019. Qualifications and courses are delivered by NEBOSH network of approximately 600 accredited Learning Partners, which are located in countries around the world. Qualification are recognized by relevant professional membership bodies including the Institutionof Occupational Safety and Health (IOSH) and the International Institute of Risk and Safety Management (IIRSM). In2014 NEBOSH received the Queen's Award for Enterprise for Outstanding Achievement in International Trade. NEBOSH IG Course for KSA After get the certificate of NEBOSH you are Able serve as a SAFETY OFFICER SAFETY ENGINEER SAFETY SUPERVISOR SAFETY MANAGER SAFETY ADVISOR SAFETY INSPECTOR SAFETY CONTROLLER SAFETY MAN SAFETY TRAINER Contents of NEBOSH IGC 1-Why we should manage workplace health & safety. 2-How health & safety management systems work & what they look like. 3-Managing risk- understanding people & processes. 4-Health & Safety monitoring and measuring. 5-HS Management Principles & Policy. 6-HS Management Practice. 7-Risk & Incident Management. 8-Promoting a positive HS culture. 6-Maintaining a safe working environment. 10-HS Law, Regulation & Influence. 11-Development of HS Practitioners NEBOSH IG Course for Saudia Address: OFFICE NO 27,2nd FLOOR, CAPITAL PLAZA,G11 MARKAZ ISLAMABAD PAKISTAN. +92-051-2741764 +92-334-5104441

IOSH Managing Safely Course in Islamabad, Rawalpindi, Karachi, Peshawar, Lahore and Pakistan 03315999937IOSH Managing Safely® is designed for anyone in a management or supervisory role, in any sector or country. The IOSH Managing Safely® course provides the essential knowledge and understanding of how to manage health & safety responsibilities in the workplace. This course is specifically designed for novice/professionals in the field of HSE looking to improve their awareness and the processes involved with assessing and controlling risks and hazards at the workplace. Whether you are a supervisor or manager looking to implement better health and safety measures within your teams or you are looking to enhance your CV and career prospects, the course is designed to give you all the practical knowledge and skill set. The IOSH Managing Safely Course is a three or four day course designed for people in supervisory or management positions in all types of organisations, who need a broad understanding of health and safety at work. The aim is to give these managers the knowledge to help implement good practice for health and safety in the workplace.IOSH Managing Safely® is designed for anyone in a management or supervisory role, in any sector or country. The IOSH Managing Safely® course provides the essential knowledge and understanding of how to manage health & safety responsibilities in the workplace. This course is specifically designed for novice/professionals in the field of HSE looking to improve their awareness and the processes involved with assessing and controlling risks and hazards at the workplace. Whether you are a supervisor or manager looking to implement better health and safety measures within your teams or you are looking to enhance your CV and career prospects, the course is designed to give you all the practical knowledge and skill set. The IOSH Managing Safely Course is a three or four day course designed for people in supervisory or management positions in all types of organisations, who need a broad understanding of health and safety at work. The aim is to give these managers the knowledge to help implement good practice for health and safety in the workplace.IOSH Managing Safely® is designed for anyone in a management or supervisory role, in any sector or country. The IOSH Managing Safely® course provides the essential knowledge and understanding of how to manage health & safety responsibilities in the workplace. This course is specifically designed for novice/professionals in the field of HSE looking to improve their awareness and the processes involved with assessing and controlling risks and hazards at the workplace. Whether you are a supervisor or manager looking to implement better health and safety measures within your teams or you are looking to enhance your CV and career prospects, the course is designed to give you all the practical knowledge and skill set. The IOSH Managing Safely Course is a three or four day course designed for people in supervisory or management positions in all types of organisations, who need a broad understanding of health and safety at work. The aim is to give these managers the knowledge to help implement good practice for health and safety in the workplace.IOSH Managing Safely Course in Islamabad, IOSH Managing Safely Course in Rawalpindi, IOSH Managing Safely Course in Gujranwala, IOSH Managing Safely Course in Sialkot, IOSH Managing Safely Course in Sargodha, IOSH Managing Safely Course in Gujrat, IOSH Managing Safely Course in Lahore, IOSH Managing Safely Course in Faisalabad, IOSH Managing Safely Course in Multan, IOSH Managing Safely Course in Mandi Bahauddin, IOSH Managing Safely Course in Bahawalpur, IOSH Managing Safely Course in Attock, IOSH Managing Safely Course in Chakwal, IOSH Managing Safely Course in Mirpur, IOSH Managing Safely Course in Bagh, IOSH Managing Safely Course in Rawala kot, IOSH Managing Safely Course in Kotli, IOSH Managing Safely Course in Karachi, IOSH Managing Safely Course in Hyderabad, IOSH Managing Safely Course in Mardan, IOSH Managing Safely Course in Peshawar, IOSH Managing Safely Course in Swat, IOSH Managing Safely Course in Rawat, IOSH Managing Safely Course in Sawabi, IOSH Managing Safely Course in Sahiwal, IOSH Managing Safely Course in Sakkar, IOSH Managing Safely Course in Haripur, IOSH Managing Safely Course in Pakistan 03315999937,

Scaffolding Inspector Course in Rawalpindi Islamabad Pakistan,Scaffolding Inspector Course in Rawalpindi Pakistan,international college of technical education offer international certification in scaffolding inspector and supervisor diploma course in rawalpindi pakistan,scaffolding supervisor course in rawalpindi islamabad pakistan,first institute in pakistan offer in international certification course in scaffolding supervisor,best rigger level 4 training institute in rawalpindi pakistan international college of technical education,certification acceptable in world wide and government job admission open for boys and girls new session coming soon Office # 27, Second Floor, Maryam Shadi Hall Plaza (Airies Plaza), Shamsabad, Murree Road, Rawalpindi, Pakistan 0311-5193625, 0092-335-4176949,The aim of the training is to provide candidates with the working knowledge and skills in the methods of the safe erection and dismantling of basic scaffolds.The purpose of this scaffolding safety Training will empower delegates with the adequate skills and knowledge needed to plan, prepare construct, modify and dismantle scaffolds in line with Internationally accepted practice in scaffolding.This material is for training purposes only to inform the reader of occupational safety and health best practices and general compliance requirement and is not a substitute for provisions of the OSH Act of 1970 or any governmental regulatory agency.OSHAcademy Occupational Safety and Health Training is a division of Geigle Safety Group, Inc., and is not connected or affiliated with the U.S. Department of Labor (DOL), or the Occupational Safety and Health Administration (OSHA).This course is designed to develop candidates' understanding of scaffolding components, forms of construction and inspection procedures of basic access scaffolds to comply with current legislation and Codes of Practice. On completion of this course learners will be able to inspect basic scaffolding structures - tower, birdcage-independent scaffolds and identify faults. They will be able to sign scafftags but the scaffold must still be erected by a competent scaffolder who should supply a handover certificate to certify structural compliance. Risk management procedures and scaffolding risk control. Plan Work - Site requirements and rules; site hazard identification; emergency procedures; priorities; scaffold fit for the purpose. Rope work including bowline; clove hitch; timber hitch; rolling hitch; use of gin wheels. Identify scaffold components and use; identify damaged components. Identify individual modular systems, their advantages/disadvantages. Tube and Coupler overview and use. Ground Bearing Pressure related to live load; dead load. Minimums and Maximums including lift height bay width, length light/medium/heavy duty scaffolds; bracing of scaffolds; tying of scaffolds. Estimation of material. practical Training - Erect modular scaffold; use tube and coupler where necessary to modify; tag completed scaffold; dismantle scaffold and stow gear.Rawalpindi, Islamabad, Lahore, Karachi, Gilgit, Skardu, Ghangche, taxila, Shigar, Astore, Diamer, Ghizer, Kharmang, Gultari, Rondo, Hunza Nagar, Gupi, Azad Jammu and Kashmir, Muzaffarabad, Mirpur, Bhimber, Kotli, Rawlakot, Bagh, Bahawalpur, Bhakkar, Chakwal, Chiniot, Dera Ghazi Khan, Faisalabad, Gujranwala, Gujrat, Hafizabad, Jhang, Jhelum, Kasur, Khanewal, Khushab, Layyah, Lodharan, Mandi-Bahuddin, Mianwali, Multan, Muzaffargarh, Nankana Sahib, Narowal, Okara, Pakpattan, Rahim Yar Khan, Rajanpur, Sahiwal, Sargodha, Sheikhupura, Sialkot, Toba tek Singh, Vehari, Attock, Taxila, Wah Cantt, Rawalpindi, Balochistan, Khyber-Pakhtunkhwa, Punjab, Sindh, Gilgit Baltistan, Turbat, Sibi, Chaman, Lasbela, Zhob, Gwadar, Nasiraba, Jaffarabad, Hub, Dera Murad Jamali, Dera Allah Yar, Khyber-Pakhtunkhwa, Peshawar, Mardan, Abbottabad, Mingor, Kohat, Bannu, Swabi, Dera Ismail Khan, Charsadda, Nowshera, Mansehra, Hyderabad, Sukkur, Larkana, Nawabshah, Nanak wara, Mirpur Khas, Jacobabad, Shikarpur, Khairpur, Pakistan.Experienced Based Diploma in Ac Technician ,Electronic , Mechanical , Plumbing , Auto Electrician , Efi Auto Electrician , Civil Surveyor , Quantity surveyor civil lab material testing , Best Institute in Rawalpindi islamabad Pakistan Lahore , Lowest fee course in pakistan , lowest fee professional practical training course in pakistan rawalpindi peshawar kashmir bagh lahore islamabad kahuta chakwal rahimyar khan gujarat gujarawala multan , attock Best institute in rawalpindi professional teacher and qualified staff.Dubai , Abu Dabi , Muscat , Oman , Doha , Qatar ,South Africa , Saudia Arabia , kawat , Behrain , Kotli Sattian , Murree , UK , UAE , Sharja,Civil Technology Courses Diploma in Civil Surveyor Diploma in Quantity Surveyor Diploma in Civil Draftman Diploma in Civil Lab Technician Diploma in Civil Architecture Diploma in Civil Engineering One Year Diploma in Civil Engineering Two Years OSHA Construction Civil Safety Electrical Technology Courses Diploma in Electrical Engineering one year Diploma in Electrical Engineering Two years Electrician Course in Rawalpindi Electrician Course in Lahore

IOSH Level 3 Course in Islamabad, Pakistan O3165643400, O3119903317 The IOSH Level 3 Certificate in Safety and Health for Business has been developed in response to business trends and feedback from employers, trainers and experienced practitioners. No other safety and health qualification offers both a business and a technical focus. With an emphasis on delivering tangible benefits for organizations, the qualification takes a more strategic approach to safety and health. As well as providing a technical overview of safety and health, this qualification addresses current issues demanded by employers, including how to drive programmes of cultural change. It is also includes new pioneering content such as managing uncertainty and how organizations can adapt to long-term “mega trends” affecting the safety of the workplace. In addition, there is a strong focus on health and well being, including health hazards, health assessment, global health trends and good practice. IOSH Level 3 Certificate in Safety and Health for Business in Islamabad. The NCFE IOSH Level 3 Certificate in Safety and Health for Business provides an understanding of safety and health in a business context. Learners gain technical knowledge and skills, as well as effective techniques to apply that knowledge in the workplace. Level 3 Certificate in Safety and Health for business has been developed by IOSH in collaboration with awarding body NCFE, and builds on the tried-and-tested IOSH managing safety course to equip supervisors and managers with the right knowledge and skills to evaluate safety systems, identify areas for improvement, implement control measures and reduce risk. Studying the IOSH level 3 Certificate in Occupational Health and Safety Practice, candidates will develop their knowledge and practice the skills required to manage regular workplace duties from an occupational health and safety perspective. This IOSH level 3 certificate in health & safety is typically intended for mid-level managers, supervisors and workers with existing Health and Safety responsibilities involved in their day-to-day working procedures and processes. Level 3 IOSH health and safety qualification is for those who are responsible for health and safety in their workplace. If you are a supervisor, manager or simply wish to enhance your career, then you need to seriously consider obtaining the health and safety qualification. Delegates are assessed by health and safety distance learning workplace assessment via our learning portal for this Level 3 IOSH Health and Safety qualification. Level 3 health and safety IOSH Online is suitable for those looking to take on the responsibility for health and safety in the workplace. If you are a supervisor, manager or simply wish to enhance your career, then you need to seriously consider obtaining this Health and Safety qualification online. Workers have the right to an appropriately regulated work environment in which their health and safety are assured. In the UK, employers have the primary responsibility by law, to provide such an environment. This responsibility is discharged through appropriately trained employees hired by the organization to carry out day-to-day health and safety processes and procedures. The Health and Safety Level 3 online course provides an opportunity to develop the competencies required for gainful employment and career progression for those who are already in employment. Assessment for this Level 3 IOSH Health and Safety certification is done through the learning portal. Candidates can learn and practice the necessary skills at their own pace. Depending on the individual’s circumstance, this health and safety level 3 can be completed between a period ranging from three months to twenty four months. Adequate support is provided throughout the duration of the training. Each candidate is assigned to one of our experienced tutors who will provide guidance until the assessment criteria has been met. The tutor can be contacted by telephone, email or through the online portal 7 days a week. Candidates are evaluated by distance learning workplace assessment. There are no formal entry requirements for this Level 3 Health and Safety Qualification however candidates must have a good understanding of English language. We will carry out an initial assessment of the candidates skills and knowledge to identify any gaps. This will help us plan the assessment process to ensure the candidate meets the qualification specification. It is beneficial that the learner has an expert witness within their organization but not a mandatory requirement to provide witness statements, if required. Candidates must be 16 years old and working in a Health and Safety role for this NVQ3 Health and Safety. Personal requirements of every candidate are identified at the beginning of this Level 3 NVQ Certificate in Occupational Health and Safety so that coaching can be tailored towards the individual’s requirements. Course Outline: Units and assessment: Safety and health management in an organization How to influence a safety and health culture within an organization A strategic, business-focused approach to safety and health Assessment method: Develop and write a business case Research project Develop and deliver a presentation

IOSH MS course in Mandi Bahauddin Rahimyar khanInternational college Of Technical Education Offer Diploma in information techonogy (DIT) in Rawalpindi Taxila Wah 03115193625 Best Diploma in information techonogy (DIT) in Rawalpindi Islamabad Pakistan professional traning Diploma in information techonogy (DIT) in Rawalpindi Islamabad Taxila Wah 03354176949 Admission open for boys and girls new session started coming soon. IOSH Working Safely is a one-day course covering the essentials of health and safety in the workplace. It is aimed at all employees in all types of organisation. IOSH Working Safely looks at people's responsibilities for health and safety, workplace hazards and risks, and how to control them It is a practice-based qualification that demonstrates the importance of safety and health in a business environment. It is made up of three modules: Safety and health management in the workplace. How to influence a safety and health culture in an organisation. A strategic business-focused approach to safety and health How hard is the course? Anyone should be able to take and pass the IOSH Managing Safely course. The course is at level 2, and therefore suitable for team leaders, supervisors and managers. You don't need any prior health and safety knowledge, but a good standard of English is recommended IOSH Managing Safely provides managers with an understanding of exactly what they are expected to manage and how.This flexible, 5-7 day course is ideal for getting managers up-to-speed on the skills they need to tackle safety and health issues in the workplace.A practical programme, full of step-by-step guidance, Managing Safely has a sharp business focus. The hands-on, jargon-free format engages and inspires, and has helped a huge range of businesses to raise standards of safety and health.IOSH Managing Safely is designed to give supervisors, managers and heads of department the knowledge and tools they need to effectively manage their teams’ health and safety. Delegates will increase their awareness and raise the competence relating to the management of health and safety in their workplace and their responsibilities as a manager/supervisor.The course includes clear scenarios to which managers can relate, and high quality technical content that’s based on what they will need to know in a real world situation. Importantly, it also brings home just why health and safety is such an essential part of their job. During the course delegates will learn, amongst other things, how to carry out risk assessments quickly and effectively, how get to grips with auditing and measuring, and discover methods to identify and control hazards.The 4 day programme, which is flexible in delivery with prior agreement from ICTE, is assessed through a multiple choice paper and practical project, completed on the fourth day. Successful completion results in award of an IOSH Managing Safely Certificate, and the knowledge required as a manager or supervisor on how to manage health and safety in your teams. IOSH Managing Safely Course Contents: 1:Introducing managing safely 2:Assessing risks 3:Controlling risks 4:Understanding your responsibilities 5:Identifying hazards 6:Investigating accidents and incidents 7:Measuring performance 8:Protecting our environment OSH MS Course in Rawalpindi Pakistan IOSH Managing Safely is a specialized course designed uniquely to educate both novice and working professionals who want to excel in the field of occupational Health, Safety and Environment (HSE) domain. The course also improves awareness level of participants and also trains them to assess and control various risks and hazards at workplaces.The course is tailor-made for working professionals like supervisors or managers who are involved in safety and security of other workers and want to enhance their career prospects by adding new dimension to their education level. As the course gives all necessary practical knowledge and skills on managing workplace safety for workers, students who aspire to become HSE professionals can enroll the course as employers look for such qualified health and safety experts to safeguard their plants and workers. Course Content: Module 1 Introducing managing safely Module 2 Assessing risks Module 3 Controlling risks Module 4 Understanding your responsibilities Module 5 Identifying hazards Module 6 Investigating accidents and incidents Module 7 Measuring performance Module 8 Protecting our environment Fee=25000 For Registration: 0092-311-5193625 / 0092-335-4176949 http://www.icollegete.com/course/iosh-managing-safely-course-in-rawalpindi/

IADC International Course in Rawalpindi Pakistan,international certification iadc rig pass course in rawalpindi islamabad pakistan,best training institute in rawalpindi,professional iadc rig pass advance course in rawalpindi,jhelum,sargodha,pakistan,certification acceptable world wide and government job,international certification osha course in islamabad pakistan,certification acceptable world wide and government job,admission open for boys and girls new session 20 january 2020 Office # 27, Second Floor, Maryam Shadi Hall Plaza (Airies Plaza), Shamsabad, Murree Road, Rawalpindi, Pakistan 0311-5193625, 0092-335-4176949,The Certification Standards are based on a detailed analysis of the well control knowledge that Drillers and Supervisors require, and the practical tasks that they have to master, in order to perform their jobs.The standards have been devised so that the measurement of their skills and knowledge can be assessed systematically. The method of assessing the performance of an individual, at both Driller and Supervisor level, is divided into the following sections.The Total Quality Assurance drilling well control class is designed for rig crews, floorhands, derrickman, AD, drillers, toolpusher and supervisors.This IADC Accredited introductory course is intended for any drilling personnel interested in understanding the basics of drilling and well control. The course is designed for the IADC WellSharp Introductory curriculum, and students will receive an IADC certificate.non-technical individuals or people entering the drilling world for the first time, the course has prerequisite material sections that provide a basic Introduction to Drilling, an animated overview of fundamental Drilling Equipment, and an explanation of fundamental math and science concepts, such as Density and Pressure.For more experienced students, the powerful downhole animations and interactive explanations of concepts such as Formation Pressure and Gas Migration can provide a powerful refresher of important material and fundamental concepts. You can’t understand what is happening deep downhole unless you can visualize it.IADC HSE Case in managing major accident hazards and what tools can be applied to successfully implement a strong strategy with respect to the ongoing management of operational and well specific hazards.This course provides an overview of the IADC guidelines with respect to operational HSE cases, supporting process for the assessment of major accident hazards and how HSE cases can be operationalized with respect to specific well planning. The program will also address API Recommended Practice (RP)96 for offshore well design, drilling and completion operations in deepwater.Rig Pass is designed to provide new employees with a basic orientation of rig operations and safe work practices to improve the safety performance of the Service Contractor and the E & P Operator and to assist both in satisfying federal, state and industry regulations and recommended practices. Upon completion, the employee will be able to demonstrate a basic knowledge of applicable regulations and government agencies, general safety policies applicable to the work site, incident and environmental protection reporting procedures, the service contractor/customer working relationship, and employee’s responsibilities. Barge Engineer Captain/Master Pit Hand, Pump Man, Shaker Man Subsea Engineer Derrickman Floorman Blowout Preventer (BOP)/Subsea Engineer, Lower Marine Riser Package (LMRP) Engineer, and Dynamic Positioning Officer Managed Pressure Drilling (MPD)/Underbalanced Drilling (UBD) well site service personnel (non-supervisory) Operator Offshore Installation Manager (OIM) Onshore monitoring crew Wellsite Geologist and office-based Operations Geologist OIM (for installations not primarily involved with drilling) Casing Crew Supervisor Cementer Remotely Operated Vehicle (ROV) personnel (supervisory) Mud Engineer Mud Logger/Wellsite Drilling Data Engineer Directional Driller Fishing Tool Operators (non-pressure operations)

Experienced Based Civil Foreman Diploma Course in Gujranwala Dubai,Qatar. International college of technical education offers management course, safety courses,IT related courses, and different type of courses and diplomas which are acceptable in national as well as in international countries. Admission open 923115193625. International college of technical education offers experienced based diploma course and also regular courses and diplomas by conducting regular classes.Civil foremen oversee workers who do things such as build bridges, repair highways, improve airports, and construct communication towers. Civil foremen spend most of their time on construction sites, but they may have an office for activities such as filling out paperwork or holding meetings. Working full-time is the norm, and overtime is commonplace as deadlines near or emergency scenarios arise. The majority of civil foremen are men. what civil forman do? A foreman is responsible for ensuring that everything goes smoothly at a construction site. A few of the main duties of a foreman are coordinating tasks for the day, creating schedules for workers, oversee quality of the site, and managing the budget. They also have to report the progress of the project to superiors.Foreman is basically an instructor who gives instructions to operators concerning their routine tasks whereas Supervisor is a middle line level of manager whose role includes checking on the operations of subordinates including that of foreman also.A foreman has to report to the supervisor. Experienced Based Civil Foreman Diploma Course in Gujranwala Dubai. Following are responsibilities and duties of civil foreman:The project itself will dictate much of a civil foreman’s specific tasks, but numerous core responsibilities are common to most positions.foremen should be prepared to do the following: Construction projects are group efforts, and civil foremen monitor team members to ensure operations flow. They may hire people and schedule their work hours. On the construction site, they communicate instructions, inspect work, and sometimes work side-by-side with their charges to demonstrate techniques or help out. Good morale increases productivity, so civil foremen try to keep the team’s energy and spirits up. They may step in to resolve issues between workers or fire employees who don’t pull their weight. Civil foremen also deal with worker-related concerns such as payroll.Different people have an interest in how a project is going. With their first-hand knowledge of what is happening at the site, civil foremen get called upon to provide updates and answer questions for project engineers, leaders, and clients. If management decides to make changes to the original plans, it discusses them with civil foremen so they can relay new information to their team. Experienced Based Civil Foreman Diploma Course in Rawalpindi, Islamabad, Lahore, Karachi, Gilgit, Skardu, Ghangche, taxila, Shigar, Astore, Diamer, Ghizer, Kharmang, Gultari, Rondo, Hunza Nagar, Gupi, Azad Jammu and Kashmir, Muzaffarabad, Mirpur, Bhimber, Kotli, Rawlakot, Bagh, Bahawalpur, Bhakkar, Chakwal, Chiniot, Dera Ghazi Khan, Faisalabad, Gujranwala, Gujrat, Hafizabad, Jhang, Jhelum, Kasur, Khanewal, Khushab, Layyah, Lodharan, Mandi-Bahuddin, Mianwali, Multan, Muzaffargarh, Nankana Sahib, Narowal, Okara, Pakpattan, Rahim Yar Khan, Rajanpur, Sahiwal, Sargodha, Sheikhupura, Sialkot, Toba tek Singh, Vehari, Attock, Taxila, Wah Cantt, Rawalpindi, Balochistan, Khyber-Pakhtunkhwa, Punjab, Sindh, Gilgit Baltistan, Turbat, Sibi, Chaman, Lasbela, Zhob, Gwadar, Nasiraba, Jaffarabad, Hub, Dera Murad Jamali, Dera Allah Yar, Khyber-Pakhtunkhwa, Peshawar, Mardan, Abbottabad, Mingor, Kohat, Bannu, Swabi, Dera Ismail Khan, Charsadda, Nowshera, Mansehra, Hyderabad, Sukkur, Larkana, Nawabshah, Nanak wara, Mirpur Khas, Jacobabad, Shikarpur, Khairpur, Pakistan. for further details of this course visit our website www.icollegete.com,www.courses.com.pk

IOSH MS Course in Shams Abad, Multan 03354176949, International college of technical education. offers Management courses, Safety courses, Technical courses, Language courses and different type of courses and diplomas. The Admission and started will be classes soon, 03115193625. IOSH Managing Safely is a basic risk management certificate in health and safety. It enables those who manage a team to meet their responsibilities for health and safety in the workplace. IOSH Working Safely is a one-day course covering the essentials of health and safety in the workplace. It is aimed at all employees in all types of organization. IOSH Working Safely looks at people's responsibilities for health and safety, workplace hazards and risks, and how to control them. The IOSH Managing Safely certificate does not have an expiry date, however IOSH do recommend that you take a refresher course every three years to keep your knowledge up to date. The main purpose of risk assessments are: To identify health and safety hazards and evaluate the risks presented within the workplace. To evaluate the effectiveness and suitability of existing control measures. Contractors in the construction industry who wish to apply for a green CSCS Labourer card can use an IOSH Working safely qualification as evidence of their health and safety training. IOSH Managing Safely is a basic risk management health and safety certificate which will offer managers an understanding of the practical actions needed for the health and safety of their teams. Risk assessment is a term used to describe the overall process or method where you: Identify hazards and risk factors that have the potential to cause harm (hazard identification). Analyze and evaluate the risk associated with that hazard (risk analysis, and risk evaluation). There are four parts to any good risk assessment and they are Asset identification, Risk Analysis, Risk likelihood & impact, and Cost of Solutions. The Health and Safety Executive (HSE) says risk should be assessed "every time there are new machines, substances and procedures, which could lead to new hazards." An employer should carry out a risk assessment: whenever a new job brings in significant new hazards. Risk assessment checklists can be powerful tools for controlling and mitigating workplace risks as well as a major part of managing the health and safety of your business. In order to achieve this, you must carefully consider all of the factors that may cause harm to your workforce. To view certificates for the current user, open the command console, and then type certmgr. msc. The Certificate Manager tool for the current user appears. To view your certificates, under Certificates - Current User in the left pane, expand the directory for the type of certificate you want to view. To verify that an OSHA Outreach Card is valid, enter the full name and card number printed on the card, then click the Submit button. Regularly inspect the work area to ensure that company policies and procedures are followed. Make sure that the company supports safe work practices and complies with the law. Help the company develop H&S strategies and plans. Conduct in-house H&S training for managers and employees. The safety officer reports directly to a supervisor or the company owner, depending on the size of the company. ... A safety engineer, on the other hand, is a qualified mechanical or chemical engineer. They are responsible for developing and maintaining a safe worksite. Free courses for skills such as coding, foreign languages, and photography are available to complete online for free right now. Certifications that could also boost your resume, like Google Analytics certifications and first aid training, are also available. IOSH MS Course in Rawalpindi, Islamabad, Lahore, Karachi, Gilgit, Skardu, Ghangche, taxila, Shigar, Astore, Diamer, Ghizer, Kharmang, Gultari, Rondo, Hunza Nagar, Gupi, Azad Jammu and Kashmir, Muzaffarabad, Mirpur, Bhimber, Kotli, Rawlakot, Bagh, Bahawalpur, Bhakkar, Chakwal, Chiniot, Dera Ghazi Khan, Faisalabad, Gujranwala, Gujrat, Hafizabad, Jhang, Jhelum, Kasur, Khanewal, Khushab, Layyah, Lodharan, Mandi-Bahuddin, Mianwali, Multan, Muzaffargarh, Nankana Sahib, Narowal, Okara, Pakpattan, Rahim Yar Khan, Rajanpur, Sahiwal, Sargodha, Sheikhupura, Sialkot, Toba tek Singh, Vehari, Attock, Taxila, Wah Cantt, Rawalpindi, Balochistan, Khyber-Pakhtunkhwa, Punjab, Sindh, Gilgit Baltistan, Turbat, Sibi, Chaman, Lasbela, Zhob, Gwadar, Nasiraba, Jaffarabad, Hub, Dera Murad Jamali, Dera Allah Yar, Khyber-Pakhtunkhwa, Peshawar, Mardan, Abbottabad, Mingor, Kohat, Bannu, Swabi, Dera Ismail Khan, Charsadda, Nowshera, Mansehra, Hyderabad, Sukkur, Larkana, Nawabshah, Nanak wara, Mirpur Khas, Jacobabad, Shikarpur, Khairpur, Pakistan. for further detail of all courses visit our website www.icollegete.com www.courses.com.pk

OSHA 30 Hours Training Course in Islamabad O3165643400, O3363333792, OSHA 30 hours Course in Islamabad O3165643400, O3363333792 This OSHA 30-Hour General Industry course is designed to educate workers on workplace and jobsite safety. Specifically, those who successfully complete this specialized training should become familiar with recognizing, avoiding, preventing and stopping potential jobsite hazards. It's OSHA Education Center's mission to ensure that workers at all responsibility levels and across all industries receive education about common workplace hazards with this OSHA 30 General Industry Training. If you’re a safety manager or supervisor, our OSHA 30-Hour General Industry course is your guide to creating a culture of safety in your workplace. You'll get a comprehensive look at the policies, procedures, and standards covered by OSHA 29 CFR 1910. The OSHA 30 hour training course for general industry is designed to help foremen, supervisors, managers, safety committee members, safety staff, and others with responsibility for workplace safety get up to speed on the basics of general health and safety regulations for their workplace. The OSHA 30 hour general industry training course also provides students with an overview of how the Occupational Safety and Health Administration (OSHA) operates. There are no prerequisites required to take the 30-hour general industry course. The OSHA 30 hour general industry training course is available in two formats; employer sponsored on-site classes, and online. The OSHA 30 hour training course for general industry is based on the federal OSHA 1910 general industry regulations, and each student at an on-site OSHA 30-hour class will receive their own copy of the OSHA general industry standards as part of their 30-hour course materials. We also address state-specific OSHA requirements, where applicable, during your OSHA 30-hour class. This OSHA 30 general industry training course is intended for operations such as factories and most other manufacturing sites, healthcare providers, warehousing and logistics operations, oil and gas production and refinery sites, and service industries. The following topics are covered in the OSHA 30 hour general industry training course: • Introduction to OSHA • Managing Safety and Health • Walking and Working Surfaces • Exit Routes, Emergency Action Plans, Fire Prevention and Protection • Electrical • Personal Protective Equipment • Materials Handling • Hazard Communication • Hazardous Materials • Flammable and Combustible Liquids • Spray Finishing • Compressed Gases • Dipping and Coating Operations • Permit-Required Confined Spaces • Lockout / Tagout • Machine Guarding • Welding, Cutting, and Brazing • Introduction to Industrial Hygiene • Respiratory Protection • Industrial Noise and Hearing Conservation • Bloodborne Pathogens • Ergonomics • Fall Protection • Safety and Health Programs • Powered Industrial Trucks (forklifts)

IOSH MS Course in Peshawar, Mardan International college of technical education All type of courses and diplomas offered by international college of technical education is acceptable in international countries as well as in domestic country. Admission open the classes will be starting Soon, 03115193625. IOSH Managing Safely is a basic risk management certificate in health and safety. It enables those who manage a team to meet their responsibilities for health and safety in the workplace. IOSH Working Safely is a one-day course covering the essentials of health and safety in the workplace. It is aimed at all employees in all types of organization. IOSH Working Safely looks at people's responsibilities for health and safety, workplace hazards and risks, and how to control them. The IOSH Managing Safely certificate does not have an expiry date, however IOSH do recommend that you take a refresher course every three years to keep your knowledge up to date. The main purpose of risk assessments are: To identify health and safety hazards and evaluate the risks presented within the workplace. To evaluate the effectiveness and suitability of existing control measures. Contractors in the construction industry who wish to apply for a green CSCS Labourer card can use an IOSH Working safely qualification as evidence of their health and safety training. IOSH Managing Safely is a basic risk management health and safety certificate which will offer managers an understanding of the practical actions needed for the health and safety of their teams. Risk assessment is a term used to describe the overall process or method where you: Identify hazards and risk factors that have the potential to cause harm (hazard identification). Analyze and evaluate the risk associated with that hazard (risk analysis, and risk evaluation). There are four parts to any good risk assessment and they are Asset identification, Risk Analysis, Risk likelihood & impact, and Cost of Solutions. The Health and Safety Executive (HSE) says risk should be assessed "every time there are new machines, substances and procedures, which could lead to new hazards." An employer should carry out a risk assessment: whenever a new job brings in significant new hazards. Risk assessment checklists can be powerful tools for controlling and mitigating workplace risks as well as a major part of managing the health and safety of your business. In order to achieve this, you must carefully consider all of the factors that may cause harm to your workforce. To view certificates for the current user, open the command console, and then type certmgr. msc. The Certificate Manager tool for the current user appears. To view your certificates, under Certificates - Current User in the left pane, expand the directory for the type of certificate you want to view. To verify that an OSHA Outreach Card is valid, enter the full name and card number printed on the card, then click the Submit button. Regularly inspect the work area to ensure that company policies and procedures are followed. Make sure that the company supports safe work practices and complies with the law. Help the company develop H&S strategies and plans. Conduct in-house H&S training for managers and employees. The safety officer reports directly to a supervisor or the company owner, depending on the size of the company. ... A safety engineer, on the other hand, is a qualified mechanical or chemical engineer. They are responsible for developing and maintaining a safe worksite. Free courses for skills such as coding, foreign languages, and photography are available to complete online for free right now. Certifications that could also boost your resume, like Google Analytics certifications and first aid training, are also available. IOSH MS Course in Rawalpindi, Islamabad, Lahore, Karachi, Gilgit, Skardu, Ghangche, taxila, Shigar, Astore, Diamer, Ghizer, Kharmang, Gultari, Rondo, Hunza Nagar, Gupi, Azad Jammu and Kashmir, Muzaffarabad, Mirpur, Bhimber, Kotli, Rawlakot, Bagh, Bahawalpur, Bhakkar, Chakwal, Chiniot, Dera Ghazi Khan, Faisalabad, Gujranwala, Gujrat, Hafizabad, Jhang, Jhelum, Kasur, Khanewal, Khushab, Layyah, Lodharan, Mandi-Bahuddin, Mianwali, Multan, Muzaffargarh, Nankana Sahib, Narowal, Okara, Pakpattan, Rahim Yar Khan, Rajanpur, Sahiwal, Sargodha, Sheikhupura, Sialkot, Toba tek Singh, Vehari, Attock, Taxila, Wah Cantt, Rawalpindi, Balochistan, Khyber-Pakhtunkhwa, Punjab, Sindh, Gilgit Baltistan, Turbat, Sibi, Chaman, Lasbela, Zhob, Gwadar, Nasiraba, Jaffarabad, Hub, Dera Murad Jamali, Dera Allah Yar, Khyber-Pakhtunkhwa, Peshawar, Mardan, Abbottabad, Mingor, Kohat, Bannu, Swabi, Dera Ismail Khan, Charsadda, Nowshera, Mansehra, Hyderabad, Sukkur, Larkana, Nawabshah, Nanak wara, Mirpur Khas, Jacobabad, Shikarpur, Khairpur, Pakistan. for further detail of all courses our the website www.icollegete.com www.courses.com.pk

IOSH MS Course in Bahawalpur, Bhakkar International college of technical education offers national and international courses the best institute of college. The admission open and Started the classes, 03115193625. IOSH Managing Safely is a basic risk management certificate in health and safety. It enables those who manage a team to meet their responsibilities for health and safety in the workplace. IOSH Working Safely is a one-day course covering the essentials of health and safety in the workplace. It is aimed at all employees in all types of organization. IOSH Working Safely looks at people's responsibilities for health and safety, workplace hazards and risks, and how to control them. The IOSH Managing Safely certificate does not have an expiry date, however IOSH do recommend that you take a refresher course every three years to keep your knowledge up to date. The main purpose of risk assessments are: To identify health and safety hazards and evaluate the risks presented within the workplace. To evaluate the effectiveness and suitability of existing control measures. Contractors in the construction industry who wish to apply for a green CSCS Labourer card can use an IOSH Working safely qualification as evidence of their health and safety training. IOSH Managing Safely is a basic risk management health and safety certificate which will offer managers an understanding of the practical actions needed for the health and safety of their teams. Risk assessment is a term used to describe the overall process or method where you: Identify hazards and risk factors that have the potential to cause harm (hazard identification). Analyze and evaluate the risk associated with that hazard (risk analysis, and risk evaluation). There are four parts to any good risk assessment and they are Asset identification, Risk Analysis, Risk likelihood & impact, and Cost of Solutions. The Health and Safety Executive (HSE) says risk should be assessed "every time there are new machines, substances and procedures, which could lead to new hazards." An employer should carry out a risk assessment: whenever a new job brings in significant new hazards. Risk assessment checklists can be powerful tools for controlling and mitigating workplace risks as well as a major part of managing the health and safety of your business. In order to achieve this, you must carefully consider all of the factors that may cause harm to your workforce. To view certificates for the current user, open the command console, and then type certmgr. msc. The Certificate Manager tool for the current user appears. To view your certificates, under Certificates - Current User in the left pane, expand the directory for the type of certificate you want to view. To verify that an OSHA Outreach Card is valid, enter the full name and card number printed on the card, then click the Submit button. Regularly inspect the work area to ensure that company policies and procedures are followed. Make sure that the company supports safe work practices and complies with the law. Help the company develop H&S strategies and plans. Conduct in-house H&S training for managers and employees. The safety officer reports directly to a supervisor or the company owner, depending on the size of the company. ... A safety engineer, on the other hand, is a qualified mechanical or chemical engineer. They are responsible for developing and maintaining a safe worksite. Free courses for skills such as coding, foreign languages, and photography are available to complete online for free right now. Certifications that could also boost your resume, like Google Analytics certifications and first aid training, are also available. IOSH MS Course in Rawalpindi, Islamabad, Lahore, Karachi, Gilgit, Skardu, Ghangche, taxila, Shigar, Astore, Diamer, Ghizer, Kharmang, Gultari, Rondo, Hunza Nagar, Gupi, Azad Jammu and Kashmir, Muzaffarabad, Mirpur, Bhimber, Kotli, Rawlakot, Bagh, Bahawalpur, Bhakkar, Chakwal, Chiniot, Dera Ghazi Khan, Faisalabad, Gujranwala, Gujrat, Hafizabad, Jhang, Jhelum, Kasur, Khanewal, Khushab, Layyah, Lodharan, Mandi-Bahuddin, Mianwali, Multan, Muzaffargarh, Nankana Sahib, Narowal, Okara, Pakpattan, Rahim Yar Khan, Rajanpur, Sahiwal, Sargodha, Sheikhupura, Sialkot, Toba tek Singh, Vehari, Attock, Taxila, Wah Cantt, Rawalpindi, Balochistan, Khyber-Pakhtunkhwa, Punjab, Sindh, Gilgit Baltistan, Turbat, Sibi, Chaman, Lasbela, Zhob, Gwadar, Nasiraba, Jaffarabad, Hub, Dera Murad Jamali, Dera Allah Yar, Khyber-Pakhtunkhwa, Peshawar, Mardan, Abbottabad, Mingor, Kohat, Bannu, Swabi, Dera Ismail Khan, Charsadda, Nowshera, Mansehra, Hyderabad, Sukkur, Larkana, Nawabshah, Nanak wara, Mirpur Khas, Jacobabad, Shikarpur, Khairpur, Pakistan. for further detail of all courses our the website www.icollegete.com www.courses.com.pk

Why You Need to Take This Course? Any manager or supervisor in any industry has a moral, legal and financial obligation to be aware of the risks involved within their working environment. Those outside of a managerial role would also benefit by having the knowledge skill set required to assess and control hazards and risks. Health and safety risks can be present in any environment and any sector and it’s essential that all organisations have individuals trained to the highest standard. The courseis also designed to help professionals to improve their career prospects. Having an IOSH Managing Safely qualification on your resume gives you the edge over other peers and helps you achieve your career goals. What are the Programm contents? Module 1 – Introducing managing safely • Module 2 – Assessing risks • Module 3 – Controlling risks • Module 4 – Understanding your responsibilities • Module 5 – Identifying hazards • Module 6 – Investigating accidents and incidents • Module 7 – Measuring performance • Module 8 – Protecting our environment What is the Certification criteria? You will be awarded the IOSH ‘Managing safely’ certificate upon attending the course and successfully completing both the written and practical assessments. There would be a 45-minute written assessment paper comprising of 22 questions that are marked on different schemes and a practical assessment. Address Office 3 Liberty Market Near PTCL exchange opp. mcb Dera Ada Multan FOR DETAIL 0336-6025838 0313-6927626

Why You Need to Take This Course? Any manager or supervisor in any industry has a moral, legal and financial obligation to be aware of the risks involved within their working environment. Those outside of a managerial role would also benefit by having the knowledge skill set required to assess and control hazards and risks. Health and safety risks can be present in any environment and any sector and it’s essential that all organisations have individuals trained to the highest standard. The courseis also designed to help professionals to improve their career prospects. Having an IOSH Managing Safely qualification on your resume gives you the edge over other peers and helps you achieve your career goals. What are the Programm contents? Module 1 – Introducing managing safely • Module 2 – Assessing risks • Module 3 – Controlling risks • Module 4 – Understanding your responsibilities • Module 5 – Identifying hazards • Module 6 – Investigating accidents and incidents • Module 7 – Measuring performance • Module 8 – Protecting our environment What is the Certification criteria? You will be awarded the IOSH ‘Managing safely’ certificate upon attending the course and successfully completing both the written and practical assessments. There would be a 45-minute written assessment paper comprising of 22 questions that are marked on different schemes and a practical assessment. Address Office 3 Liberty Market Near PTCL exchange opp. mcb Dera Adda Multan FOR DETAIL 0336-6025838 0313-6927626

Why You Need to Take This Course? Any manager or supervisor in any industry has a moral, legal and financial obligation to be aware of the risks involved within their working environment. Those outside of a managerial role would also benefit by having the knowledge skill set required to assess and control hazards and risks. Health and safety risks can be present in any environment and any sector and it’s essential that all organisations have individuals trained to the highest standard. The courseis also designed to help professionals to improve their career prospects. Having an IOSH Managing Safely qualification on your resume gives you the edge over other peers and helps you achieve your career goals. What are the Programm contents? Module 1 – Introducing managing safely • Module 2 – Assessing risks • Module 3 – Controlling risks • Module 4 – Understanding your responsibilities • Module 5 – Identifying hazards • Module 6 – Investigating accidents and incidents • Module 7 – Measuring performance • Module 8 – Protecting our environment What is the Certification criteria? You will be awarded the IOSH ‘Managing safely’ certificate upon attending the course and successfully completing both the written and practical assessments. There would be a 45-minute written assessment paper comprising of 22 questions that are marked on different schemes and a practical assessment. FOR DETAIL 0336-6025838 0313-6927626

Why You Need to Take This Course? Any manager or supervisor in any industry has a moral, legal and financial obligation to be aware of the risks involved within their working environment. Those outside of a managerial role would also benefit by having the knowledge skill set required to assess and control hazards and risks. Health and safety risks can be present in any environment and any sector and it’s essential that all organisations have individuals trained to the highest standard. The courses also designed to help professionals to improve their career prospects. Having an IOSH Managing Safely qualification on your resume gives you the edge over other peers and helps you achieve your career goals. What are the Programm contents? Module 1 – Introducing managing safely • Module 2 – Assessing risks • Module 3 – Controlling risks • Module 4 – Understanding your responsibilities • Module 5 – Identifying hazards • Module 6 – Investigating accidents and incidents • Module 7 – Measuring performance What is the Certification criteria? You will be awarded the IOSH ‘Managing safely’ certificate upon attending the course and successfully completing both the written and practical assessments. There would be a 45-minute written assessment paper comprising of 22 questions that are marked on different schemes and a practical assessment. http://facebook.com/sibtmultan FOR DETAIL 0336-6025838 0313-6927626 Address Office 3 Liberty Market Near PTCL exchange opp. mcb Dera Ada Multan

Rigger Level 4 Course in Rawalpindi Islamabad Pakistan,Rigger Level 4 Course in Rawalpindi Islamabad Pakistan,Rigger Level 4 Certified Course in Rawalpindi Islamabad Pakistan,Rigger Level 4 Certified Course in Rawalpindi Islamabad Pakistan,international college of technical education in rawalpindi pakistan,best rigger level 4 training institute in rawalpindi pakistan international college of technical education,certification acceptable in world wide and government job admission open for boys and girls new session coming soon Office # 27, Second Floor, Maryam Shadi Hall Plaza (Airies Plaza), Shamsabad, Murree Road, Rawalpindi, Pakistan 0311-5193625, 0092-335-4176949,Delegates will learn the basic level of safe rigging and slinging for safe working practices associated with lifting accessories, lifting appliances and lifting operation in general.Initial Training Programme are to provide the delegate with knowledge of the rigging principles, general hazards and risks of rigging and lifting operations, an awareness of relevant legislation and regulation, and an opportunity to practice basic rigging operations following a lifting plan. Stage 2 takes place on-site where personnel will complete workforce requirements under supervision.The purpose of this qualification is to provide the rigging sector with people who have attained advanced rigging skills and knowledge. They will be able to plan, prepare documentation, carry out and control complex rigging operations safely. They will also be able to supervise and lead a team carrying out advanced rigging activities.Graduates of this qualification will be able to safely set up and control the movement of loads over distance, which are usually suspended at heights. Advanced riggers supervise and lead a team during complex rigging operations.Graduates of this qualification will be capable of working autonomously.Exposing participants to a variety of equipment and applications including multiple-crane lifting, load turning, load drifting with chain hoists, jacking and rolling using mechanical, pneumatic and hydraulic systems, winching and blocking with incline planes, and managing the center-of-gravity with multiple axes. See below for a full course outline and learning objectives.The typical Master Rigger participant has had some exposure (2-10 years) to crane and rigging operations. Participants comprise a wide range of roles including field engineer, lifting supervisor, crane and rigging manager, safety personnel as well as a multitude of crafts including millwright, boilermaker, pipefitter, ironworker, mechanic, rigger, machinery mover and several others. Inclined Planes Load Control Center of Gravity Snatch Block & Winch Systems Come-a-Longs & Chain Falls Jacking & Rolling Rigging Design Lifting Angles Compound Loading Multiple Hitch Systems Load Turning Rigger duties and responsibilities Terms and definitions of various lifting/rigging terminology Introduction to various types of slings (webbing slings, wire rope slings and chain slings) Rejection criteria of lifting accessories Types of lifting hitches Sling angles Types of Shackles, eye bolts and hooks, chain block , turn buckles and their inspection Proper lifting techniques Communication and Hand Signals during Lifting Hazards associated with cranes operation Practical Session Assessment