Rj45 10100m power supply

Description: Details iShopping.pk brings you the best price for Shure Central Control Unit With Power Supply Kit with express shipping all over Pakistan.   The Central Control Unit for DDS 5900 and DCS 6000 Conference Systems from Shure powers up to 60 microphone units and supports up to 250 units. It supports 2 languages and 32 interpreters and can be used in various speech-application environments such as hotel/conference centers, multi-purpose/training rooms, education facilities, corporate/board rooms, courtrooms, and more. Featuring two analog audio inputs for external sources, the Central Control Unit has eight analog audio outputs for connections to videoconferencing systems, A/V recording equipment, supplemental sound reinforcement systems, or wireless language distributions system. In addition, with Feature License FL6000 (sold separately), the DIS-CCU can be used with DCS 6000-series microphone units serving up to 250 participants and 4 languages. Additional Feature Licenses enable support for up to 3,800 participants, 200 interpreters, and 31 languages. • Fully digital audio transmission of floor plus 31 interpretation channels and 8 conference microphone audio channels in a single digital-bus cable structure using shielded CAT5e cables • OLED display on the front enables the user to setup basic system configurations in terms of maximum number of speakers/requests, microphone operation mode, etc. • TCP/IP Ethernet connection for web browser control, integration with optional SW 6000 software suite, or third party external control system (AMX, Crestron, etc.) • 2 analog audio inputs and 8 analog audio outputs for distribution of audio from eight groups of units, the floor channel, or the interpreter channels. • Connection for Emergency Evacuation Message (EEM) is available using 'Audio In 2' and a contact closure switch • Powers up to 60 units without additional power supply (depending on unit type)   Features: • Central Control Unit and Microprocessor • Power Supply for Central Control Unit • For DDS 5900 & DCS 6000 Systems • 4 Modes: Auto, FIFI, VOX, and Manual • 3 Microphone Interrupt Modes • 2 Analog Audio Inputs • Up to 8 Microphones Open at One Time • Scrambles Audio to Avoid Evesdropping • Auto Off of Conference Units   Specifications: System Performance Max Number of Discussion Units For DDS 5900: 250 Powered by CU 5905: 60 Microphones Max Number Open: 8 Languages Interpreter Channels: 2 Max Number of Interpreter Units: 32 Network LAN DCS-LAN Outputs: 4 x RJ45 female sockets TCP/IP 1 x RJ45 female socket Audio Inputs Analog Input 1: 1 x 3-pin female XLR socket (electronically balanced) Analog Input 2 EEM: 1 x 3-pin female XLR socket (electronically balanced) with contact closure Input Level Max: +15 dBm (4.5 Vrms) Input Impedance 50 to 100 kOhms Audio Output 8 x 3-pin XLR (electronically balanced) Maximum load: >1 kOhms Maximum Load >1 kOhms Nominal Output Levels 0 dBm at nominal input Maximum Output Level 4.9 Vrms ~ +16 dBm Electrical Power Consumption 22 W/48 V (150 W max.) Supply Voltage For Microphone Units: 122 W/48 V Sampling Frequency 24-bit/32 kHz Total Harmonic Distortion (THD) Signal to Noise Ratio >85 dBA Mechanical Mounting Tabletop, standard 19" rack. Storage Temperature Range -4 to 140°F (-20 to 60°C) Operating Temperature Range 41 to 104°F (5 to 40°C) Humidity 10 to 80% Dimensions (H x W x D) 1.75 x 16.8 x 7.2" (44.4 x 426 x 186 mm) Weight 6.17 lb (2.8 kg)  

Features: Passive PoE- means that input and output voltage are equal. Transforms Non PoE devices to PoE enabled. Supports 5V, 12V, 24V, 48V. Power supply required for power input - simply use the power supply (wall transformer) that is provided with the device you are trying to power. PoE injector and splitter kit with 5.5 * 2.1 mm DC jack / plug. Use with IP security camera, wireless access point and other devices. Can work up to30-40 metres/100-130ft (depending on the quality of the cable and the power draw of the device). Specifications: Color: Black, White(Optional) Material: Plastic Injector: RJ45 Male + Power In to RJ45 Female Splitter: RJ45 Female to RJ45 Male + Power Out Supports: 5V, 12V, 24V, 48V Power plug / jack: 2.1 * 5.5mm / 0.9 * 2.2in Power Pins: 4,5 + and 7,8 Length:18cm / 6.9in Transmission distance: 30-40 m / 100-130 ft Application: WLAN, routers, switches, internet telephony, security monitoring etc Product size: 17.5 * 1.9 * 1.8cm / 6.8 * 0.7 * 0.7in Product weight: 53g / 1.86oz Package size: 22.3 * 9 * 2.2cm / 8.8 * 3.5 * 0.9in Package weight: 54g / 1.9oz

Ethernet IP network uav data video transceiver with RJ45, RS232, RS422, RS485 uav data video transceiver (SG-2400NB) for data communication equipment, with TDD-COFDM two way data communication Wireless network transceiver is newly designed and with AES data encryption and excellent data safety. UAV transceiver uses the advanced data processing technology and leading division COFDM modulation. Drone transceiver has encrypted network data transfer channel and is linked to DTE DCE and used in UAV and military. uav data video transceiver achieves real-time live broadcast, anti-multipath, high-speed mobile data, voice and image duplex module transmission. Model No.: SG-2400NB Ethernet: 10/100BaseT,Auto-MDI/X,IEEE802.3 TCP,UDP,TCP/IP,TFTP,ARP,ICMP,DHCP,HTTP,SNMP,FTP,DNS Power supply: DC7V~17V,6W consumption Output frequency: 2405~2470MHz(adjustable) Output RF power: 100 to 1000MHz Bandwidth: 4MHz / 8MHZ Interface: RJ-45 ethernet; RS232 RS485 RS422 data Resolution: Support 720P and 1080@50/60hz 30 frames Encryption: 128bit AES or 256 bits AES LOS: 8km - 10km NLOS: 1km -2km Characteristics: portable, mini, mobile radio AES Encryption: 128bit or 256 bit encrypted Transmission: two way signal, audio,video and data

· Power supply: 9V DC · Cable type: RJ11 & RJ45 LAN cable. · Connectors: Ethernet Cat 5, 5e, Cat 6, Cat 7, RJ11 6P & RJ45 8P.

Description: Details iShopping.pk brings you the best price for TP-Link 8-Port Gigabit Desktop Switch with 4-Port PoE (TL-SG1008P) with express shipping all over Pakistan.   Features: • 8 10/100/1000Mbps RJ45 ports •  With four PoE ports, transfers data and power on one single cable •  Working with IEEE 802.3af compliant PDs, expands home and office network •  Requires no configuration and installation  •  802.1p/DSCP QoS enable smooth latency-sensitive traffic • Supports PoE power up to 15.4W for each PoE port • Supports PoE power up to 55W for all PoE ports • Supports PoE IEEE 802.3af compliant PDs • Supports IEEE 802.3x flow control for Full-duplex Mode and backpressure for Half-duplex Mode • 4K entry MAC address table of the TL-SG1008P with auto-learning and auto-aging • 802.1p/DSCP QoS enable smooth latency-sensitive traffic • LED indicators for monitoring power, link, activity and speed • External power adapter supply   Specification: HARDWARE Interface 8 10/100/1000Mbps RJ45 Ports AUTO Negotiation/AUTO MDI/MDIX Network Media 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 100BASE-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Fan Quantity Fanless Power Consumption 65.2W (max. with 55w PoE device connected) 5.5W (max. no PoE device connected) External Power Supply External Power Adapter(Output: 48VDC / 1.25A) PoE Ports (RJ45) Standard: 802.3 af compliant PoE Ports: Port1- Port4 Power Supply: 55W Backbound Bandwidth 16Gbps Mac Address Table 4K Dimensions (W x D x H) 6.7*3.9*1.1 in. (171*98*27 mm) SOFTWARE Transmission Method Store-And-Forward Advanced Functions Compatible With IEEE 802.3af Compliant PDs Priority Function Mac Address Auto-Learning And Auto-Aging EEE802.3x Flow Control 802.1p/DSCP QoS OTHERS Certification CE, FCC, RoHS Consumption 65.2W (max. with 55w PoE device connected) 5.5W (max. no PoE device connected) Environment Operating Temperature: 0°C~40°C (32°F~104°F) Storage Temperature: -40°C~70°C (-40°F~158°F) Operating Humidity: 10% ~ 90% non-condensing Storage Humidity: 5%~90% non-condensing   What This Product Does 8-Port Gigabit Desktop Switch with 4-Port PoE provides the seamless network connection. It integrates 1000Mbps Gigabit Ethernet and 10/100Mbps Fast Ethernet network capabilities.    How This Product Works 4 of the 8 Auto-Negotiation RJ45 ports (port-1 to port-4) of the switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc.     Overload Arrangement TL-SG1008P has the priority* function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is >= 55W, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port.     Port Priority Function Priority (port 1=port 2=port 3>port 4): This function will help protect the system if the system power becomes overloaded. For example, Port 1, 2 and 4 are using 15.4W (maximum power per port is 15.4W), the system power is 46.2W in total. If there is an additional PD inserted to Port 3 with 10W then the system will cut off Port 4 to protect the system, this means Port 1, 2 will use 15.4W, and Port3 will use 10W, and no power will be supplied to Port 4.   Easy To Use TL-SG1008P is easy to install and use. It requires no configuration and installation. With desktop design, outstanding performance and quality, the TP-LINK TL-SG1008P 8-Port Gigabit Desktop Switch with 4-Port PoE is a great selection for expanding your home or office network. 

Description: Details iShopping.pk brings you the best price for TP-Link 8-Port 10/100Mbps Desktop Switch with 4-Port PoE (TL-SF1008P) with express shipping all over Pakistan.   Feaures: • With four PoE ports, transfers data and power on one single cable •  Working with IEEE 802.3af compliant PDs, expands home and office network •  Requires no configuration and installation • Supports PoE power up to 15.4W for each PoE port • Supports PoE power up to 57W for all PoE ports • Supports PoE IEEE 802.3af compliant PDs • Supports IEEE 802.3x flow control for Full-duplex Mode and backpressure for Half-duplex Mode • 2K entry MAC address table of the TL-SF1008P with auto-learning and auto-aging • LED indicators for monitoring power, link, activity • External power adapter supply   Specification: HARDWARE Interface 8 10/100Mbps RJ45 Ports AUTO Negotiation/AUTO MDI/MDIX Network Media 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 100BASE-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Fan Quantity Fanless Power Consumption Maximum (PoE on): 60.2W (220V/50Hz) Maximum (PoE off): 3.2W (220V/50Hz) External Power Supply External Power Adapter(Output: 48VDC / 1.25A) PoE Ports (RJ45) Standard: 802.3 af compliant PoE Ports: Port1- Port4 Power Supply: 57W Backbound Bandwidth 1.6Gbps Mac Address Table 2K Dimensions (W x D x H) 6.7*3.9*1.1 in. (171*98*27 mm) SOFTWARE Transmission Method Store-And-Forward Advanced Functions Compatible With IEEE 802.3af Compliant PDs Priority Function Mac Address Auto-Learning And Auto-Aging IEEE802.3x Flow Control For Full-Duplex Mode And Backpressure For Half-Duplex Mode OTHERS Certification FCC, CE, RoHS Consumption 2.3 watts (max. no PD connected) 59.3 watts (max. with 57w PD connected) Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing   What This Product Does TL-SF1008P is an 8 10/100Mbps ports unmanaged switch that requires no configuration and provides 4 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to ­fix devices such as APs, IP Cameras or IP Phones, etc.   Power over Ethernet 4 of the 8 Auto-Negotiation RJ45 ports (port-1 to port-4) of the switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af compliant Powered Devices (PDs).    Overload Arrangement TL-SF1008P has the priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is >= 57W, a priority will be arranged among the PoE ports, then the system will cut o‑ the power of the lowest-priority port.   Port Priority Function Priority (port-1=port-2=port-3>port-4):  This function will help to ensure the normal operation of the system, it means Port 4 will be cut off when all total PoE PDs power consumption exceed 57W. For an example, Port 1, 2 and 4 is using 15.4W (maximum power for per port is 15.4W); the system power is 46.2W in total. If there is an additional PD inserted to Port 3 with 12W, and then the system will cut off the power of Port 4 because of the overloaded power, this means Port 1, 2 will use 15.4W, and Port3 will use 12W, no power will be supplied to Port 4.   Easy To Use TL-SF1008P is easy to install and use. It requires no confi­guration and installation. With desktop design, outstanding performance and quality, the TP-LINK’s TL-SF1008P 8-Port 10/100Mbps Desktop Switch with 4-Port PoE is an ideal choice for expanding your home or office network.

Description: Details iShopping.pk brings you the best price for TP-Link 10-Port Gigabit Smart PoE Switch with 1 SFP Slots (TL-SG1210P) with 18 months official warranty and express shipping all over Pakistan.   Features: • 9 10/100/1000Mbps RJ45 ports, 1 Gigabit SFP port •  With 8 PoE+ ports, transfers data and power on one single cable •  Works with IEEE 802.3af/at compliant PDs and expands office network •  802.1p/DSCP QoS enable smooth latency-sensitive traffic •  High PoE power budget with up to 30W for each PoE port and 63W for all PoE ports •  Easy to use, with no configuration and installation needed   Specifications: HARDWARE FEATURES Interface 8 PoE+ 10/100/1000Mbps RJ45 Ports 1 10/100/1000Mbps RJ45 Port 1 Gigabit SFP Slot Network Media 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 100BASE-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 1000BASE-X MMF, SMF Fan Quantity Fanless Physical Security Lock Yes Power Supply External Power Adapter(Output: 53.5VDC / 1.31A) Packet Forwarding Rate 14.88 Mpps PoE+ Ports(RJ45) Standard: 802.3at/802.3af compliant PoE Ports: Port1- Port 8 PoE Power Budget: 63W Mac Address Table 4K Jumbo Frame 16 KB Switching Capacity 20 Gbps Dimensions (W x D x H) 209 × 126 × 26 mm Max Power Consumption 7.11 W (220/50Hz. no PD connected) 78.13 W (220/50Hz. with 63W PD connected) Max Heat Dissipation 24.25 BTU/h (no PD connected) 266.42 BTU/h (with 63W PD connected) SOFTWARE FEATURES Advanced Features Compatible With IEEE 802.3af/at Compliant PDs EEE802.3x Flow Control 802.1p/DSCP QoS IGMP Snooping Transmission Method Store-And-Forward OTHERS Certification CE, FCC, RoHS Package Contents TL-SG1210P, Power Adapter, Installation Guide Environment Operating Temperature: 0°C~40°C (32°F~104°F) Storage Temperature: -40°C~70°C (-40°F~158°F) Operating Humidity: 10% ~ 90% non-condensing Storage Humidity: 5%~90% non-condensing   Power over Ethernet Port 1-8 of the switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af/at compliant Powered Devices (PDs).   Intelligent Power Management When total power consumption excels 63W, the intelligent power management will cut the lower priority port power off to ensure the high priority port’s power supply and protect the device from power overload operation.   Sturdy Metal Casing Sturdy, compact metal casing, with desktop/wall-mounting design, to meet your needs in any environment. Besides, fanless design ensures quiet operation.   Multiple Applications The benefits of PoE switches have become more evident with the rapid expansion of network-connected devices. They offer more effective solutions for connecting numerous PoE-compatible devices like VoIP, IP cameras, and access points—meeting the demands of most common business scenarios.

Description: Details iShopping.pk brings you the best price for TP-Link 5-Port 10/100Mbps Desktop Switch with 4-Port PoE (TL-SF1005P) with express shipping all over Pakistan.   Power over Ethernet 4 of the 5 Auto-Negotiation RJ45 ports (Port 1 to Port 4) of the switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af compliant Powered Devices (PDs). Overload Arrangement TL-SF1005P has the priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is >= 58W, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port. Port Priority Function Priority (port-1=port-2=port-3>port-4): This function will help to ensure the normal operation of the system, it means Port 4 will be cut off when all total PoE PDs power consumption exceed 58W. For an example, Port 1, 2 and 4 is using 15.4W (maximum power for per port is 15.4W); the system power is 46.2W in total. If there is an additional PD inserted to Port 3 with 12W, and then the system will cut off the power of Port 4 because of the overloaded power, this means Port 1, 2 will use 15.4W, and Port3 will use 12W, no power will be supplied to Port 4.   Easy To Use TL-SF1005P is easy to install and use. It requires no configuration and installation. With desktop design, outstanding performance and quality, the TP-Link’s TL-SF1005P 5-Port 10/100Mbps Desktop Switch with 4-Port PoE is an ideal choice for expanding your home or office network.     Specification: HARDWARE FEATURES Interface 5 10/100Mbps RJ45 Ports AUTO Negotiation/AUTO MDI/MDIX Network Media 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 100BASE-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Fan Quantity Fanless External Power Supply External Power Adapter(Output: 48VDC / 1.25A) PoE Ports (RJ45) Standard: 802.3 af compliant PoE Ports: Port1- Port4 Power Supply: 58W Mac Address Table 2K Switching Capacity 1Gbps Dimensions (W x D x H) 3.9 x 3.9 x 1.0 in. (99.8 x 98 x 25 mm) Transmission Distance Store-And-Forward Max Power Consumption 63.51W (max. with 58w PD connected) 1.70W (max. no PD connected) Max Heat Dissipation 5.73BTU/h(no PD connected) 221.17BTU/h(with 58W PD connected) SOFTWARE FEATURES Transmission Method Store-And-Forward Advanced Functions Compatible With IEEE 802.3af Compliant PDs Priority Function Mac Address Auto-Learning And Auto-Aging IEEE802.3x Flow Control For Full-Duplex Mode And Backpressure For Half-Duplex Mode OTHERS Certification FCC, CE, RoHS Package Contents TL-SF1005P, Power Adapter, User Guide Consumption 1.70 watts (max. no PD connected) 63.51 watts (max. with 58w PD connected) Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90%RH non-condensing Storage Humidity: 5%~90%RH non-condensing   What This Product Does TL-SF1005P is a 5 10/100Mbps ports unmanaged switch that requires no configuration and provides 4 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc. 

Description: Details iShopping.pk brings you the best price for TP-Link 8-Port Gigabit Desktop/Rackmount Switch with PoE+ (TL-SG1008PE) with express shipping all over Pakistan.   Features: • 8 10/100/1000Mbps RJ45 ports •  Equipped with 8 PoE+ supported ports to transfer data and power over a single cable •  Works with IEEE 802.3af/at compliant devices, expanding home and office networks •  Innovative energy-efficient technology reduces power output by up to 75% •  Plug and play design, no configuration required • Equipped with 8 PoE+ ports • Supports PoE+ standard with total power budget of 124W and up to 30W per port • Supports PoE+ IEEE 802.3af/at compliant devices • Supports IEEE 802.3x flow control for Full-duplex Mode and backpressure for Half-duplex Mode • 8K entry MAC address table of the TL-SG1008PE with auto-learning and auto-aging • LED indicators to monitoring power, link, activity and speed • Internal power supply   Specification: HARDWARE Interface 8 10/100/1000Mbps RJ45 Ports AUTO Negotiation/AUTO MDI/MDIX Network Media 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 100BASE-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Fan Quantity 1 Power Supply 100-240VAC, 50/60Hz Power Consumption Maximum (PoE on): 133.8W (220V/50Hz) Maximum (PoE off): 9.8W (220V/50Hz) PoE+ Ports(RJ45) Standard: 802.3at/af compliant PoE+ Ports: 8 Ports Power Supply: 124W Backbound Bandwidth 16Gbps Mac Address Table 8K Buffer Size 2Mbits Dimensions (W x D x H) 11.6*7.1*1.7 in. (294*180*44 mm) SOFTWARE Advanced Features Compatible With IEEE 802.3af/at Compliant PDs Priority Function Mac Address Auto-Learning And Auto-Aging IEEE802.3x Flow Control For Full-Duplex Mode And Backpressure For Half-Duplex Mode Transfer Method Store-And-Forward OTHERS Certification FCC, CE, RoHS Consumption 9.5 watts (max. no PD connected) 140.1 watts (max. with 124w PD connected) Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing   What This Product Does The TL-SG1008PE is an 8-Port Gigabit Desktop/Rack mountable Switch with all 8 ports supporting the PoE+ standard. It provides a simple way to expand a wired network by transferring power and data over a single Ethernet Cable. With a total power budget of 124W, up to 30W per port, TL-SG1008PE can power more high-powered devices such as wireless Access Points (APs), IP Cameras or IP Phones. Moreover, with innovative energy-efficient technology, the TL-SG1008PE can save up to 75% of the power consumption, making it an eco-friendly solution for your business network.   How This Product Works All 8 ports of TL-SG1008PE support Power over Ethernet Plus (PoE+) standard which can automatically detect and supply power to any IEEE 802.3af/at compliant device(s). In this situation, the electrical power is transmitted along with data in a single cable, allowing you to expand your network where there are electrical cables or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones.   Overload Arrangement TL-SG1008PE has a priority function which helps protect the system when its power is overloaded. If all PoE+ devices’ power consumption is greater than or equal to 124W, a priority will be arranged among the 8 PoE+ ports, at which point the system will cut off the power of the lowest-priority port.     Port Priority Function *Priority (port 1 > port 2 > port 3 > port 4 > port 5 > port 6 > port F > port 8): This function helps protect the system if the power becomes overloaded. For example, if port 1, 2, 4 and 7 are using 30W (maximum power per port is 30W, the system power is 120W in total), and there is an additional device inserted into Port 3 at 25W, the system will cut off the power of Port 7 in response to the power exceeding the 120W limit., This means Port 1, 2 and 4 will use 30W, and Port 3 will use 25W, with no power will be supplied to Port 7 as it has the lowest designated priority among the ports in use.    Easy To Use TL-SG1008PE is easy to install and use. It requires no configuration or installation. With its Desktop/Rack mountable design, outstanding performance and quality, the TP-LINK TL-SG1008PE 8-Port Gigabit Desktop/Rack mountable Switch with 8-Port PoE is a great choice for expanding your home or office network.

Description: Details iShopping.pk brings you the best price for TP-Link 5-Port 10/100Mbps Desktop Switch with 4-Port PoE (TL-SF1005P) with 18 months official warranty and express shipping all over Pakistan.   Specification: HARDWARE FEATURES Interface 5 10/100Mbps RJ45 Ports AUTO Negotiation/AUTO MDI/MDIX Network Media 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 100BASE-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Fan Quantity Fanless External Power Supply External Power Adapter(Output: 48VDC / 1.25A) PoE Ports (RJ45) Standard: 802.3 af compliant PoE Ports: Port1- Port4 Power Supply: 58W Mac Address Table 2K Switching Capacity 1Gbps Dimensions (W x D x H) 3.9 x 3.9 x 1.0 in. (99.8 x 98 x 25 mm) Transmission Distance Store-And-Forward Max Power Consumption 63.51W (max. with 58w PD connected) 1.70W (max. no PD connected) Max Heat Dissipation 5.73BTU/h(no PD connected) 221.17BTU/h(with 58W PD connected) SOFTWARE FEATURES Transmission Method Store-And-Forward Advanced Functions Compatible With IEEE 802.3af Compliant PDs Priority Function Mac Address Auto-Learning And Auto-Aging IEEE802.3x Flow Control For Full-Duplex Mode And Backpressure For Half-Duplex Mode OTHERS Certification FCC, CE, RoHS Package Contents TL-SF1005P, Power Adapter, User Guide Consumption 1.70 watts (max. no PD connected) 63.51 watts (max. with 58w PD connected) Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90%RH non-condensing Storage Humidity: 5%~90%RH non-condensing   Power over Ethernet 4 of the 5 Auto-Negotiation RJ45 ports (Port 1 to Port 4) of the switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af compliant Powered Devices (PDs).   Overload Arrangement TL-SF1005P has the priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is >= 58W, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port.   Port Priority Function Priority (port-1=port-2=port-3>port-4): This function will help to ensure the normal operation of the system, it means Port 4 will be cut off when all total PoE PDs power consumption exceed 58W. For an example, Port 1, 2 and 4 is using 15.4W (maximum power for per port is 15.4W); the system power is 46.2W in total. If there is an additional PD inserted to Port 3 with 12W, and then the system will cut off the power of Port 4 because of the overloaded power, this means Port 1, 2 will use 15.4W, and Port3 will use 12W, no power will be supplied to Port 4.     Easy To Use TL-SF1005P is easy to install and use. It requires no configuration and installation. With desktop design, outstanding performance and quality, the TP-Link’s TL-SF1005P 5-Port 10/100Mbps Desktop Switch with 4-Port PoE is an ideal choice for expanding your home or office network.  

Description: Details iShopping.pk brings you the best price for TP-Link 8-Port 10/100Mbps + 2-Port Gigabit Switch (TL-SL1210) with express shipping all over Pakistan   Features: • 8 10/100M RJ45 ports + 2 10/100/1000M RJ45 ports • Plug and Play design simplifies installation • Innovative energy-efficient technology saves power up to 75%   Specifications:  HARDWARE FEATURES Standards and Protocols IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab,, IEEE 802.3x Interface 8 10/100Mbps RJ45 Ports (Auto Negotiation/Auto MDI/MDIX) 2 10/100/1000Mbps RJ45 Ports (Auto Negotiation/Auto MDI/MDIX) Network Media 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) 100BASE-TX/1000BASE-T: UTP category 5, 5e or above cable (maximum 100m) Fan Quantity Fanless Power Supply 100-240VAC, 50/60Hz Dimensions (W x D x H) 11.6*7.1*1.7 in. (294*180*44 mm) PERFORMANCE Switching Capacity 5.6Gbps Packet Forwarding Rate 4.17Mpps MAC Address Table 8K Green Technology Innovative energy-efficient technology saves power up to 65% Transfer Method Store-and-Forward OTHERS Certification FCC, CE, RoHS Package Contents 8-Port 10/100Mbps + 8-Port Gigabit Switch0 Power Cord Installation Guide Rackmount Kit Rubber Feet System Requirements Microsoft® Windows® 98SE, NT, 2000, XP, Vista™, Windows 7 or Windows 8, MAC® OS, NetWare®, UNIX® or Linux. Environment Operating Temperature: 0℃~40℃ (32℉~104℉); Storage Temperature: -40℃~70℃ (-40℉~158℉); Operating Humidity: 10%~90% non-condensing; Storage Humidity: 5%~90% non-condensing   What This Product Does The TL-SL1210 with TP-LINK Green Technology is an Environmentally-friendly and competitive choice for small business. It provides 8 10/100Mps Auto-Negotiation RJ45 ports and 2 10/100/1000Mbps Auto-Negotiation RJ45 ports, all RJ45 ports Support Auto-MDI/MDIX function. TL-SL1210 Gigabit Switch provides a cost-effective, high performance, non-disruptive, smooth evolution into Gigabit solutions. The Switch delivers superior performance with improving workgroup, network bandwidth, increasing network node, providing the greater flexibility, installation convenience. Moreover, with the innovative energy-efficient technology, the TL-SL1210 can save up to 75% of the power consumption, making it an eco-friendly solution for your business network.  Gigabit Uplink The TL-SL1210 has 8 fast Ethernet ports and 2 Gigabit uplink port. The Gigabit uplink port provides bandwidth access of up to 1000Mbps. Due to the fact that network upgrades tend to be progressive over time, your network will tend to become mixed with both Fast 100Mbps Ethernet and Gigabit. TL-SL1210 is ideal for situations such as these to mitigate throughput issues and coordinate work efficiently; Allowing your organization retain most of your network investments, while enhancing network performance quickly.    Go Green With Your Ethernet You now have the choice to go green when upgrading to a gigabit network! This new product TL-SL1210 features the latest innovative energy-efficient technologies that can greatly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status and cable length to limit the carbon footprint of your network. Power down Idle Ports   When a computer or network equipment is off, the corresponding port of a traditional switch will continue to consume considerable amounts of power. The TL-SL1210 can automatically detect the link status of each port and reduce the power consumption of ports that are idle. Power Budget According to Cable Length   Ideally, shorter cables would use less power because of less power degradation over their length; this is not the case with most devices as they will use the same amount of power across the cable regardless of wheth More Efficient Utilizing non-blocking switching architecture, TL-SL1210 can forward and filter packets at full wire-speed for maximum throughput. Moreover, 100% data filtering rate eliminates all error packets and make your network work more efficiently.  Easy to Use When powered on, it can work automatically without any pre-set. All ports support Auto-Negotiation and Auto-MDI/MDIX function. Compact size shell make it ideal for desktops with limited space while it is also Rackmountable, convenient and safe. Dynamic LED lights provide real-time work status display and basic fault diagnosis.

Description: Details iShopping.pk brings you the best price for TP-Link 16-Port Gigabit Easy Smart PoE Switch with 8-Port PoE+ (TL-SG1016PE) with express shipping all over Pakistan   Features: • 16 10/100/1000Mbps RJ45 ports • Equipped with 8 PoE+ supported ports to transfer data and power over a single cable • With a total PoE power budget of 110W, up to 30W per port • Works with IEEE 802.3af/at compliant devices, expanding home and office networks • Simple network set-up on top of plug-and-play connectivity  • Web-based user interface and management utility simplify configuration    Specification: HARDWARE FEATURES Standards and Protocols IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.1q, IEEE 802.1p Interface 16 10/100/1000Mbps RJ45 Ports AUTO Negotiation/AUTO MDI/MDIX  Network Media 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 100BASE-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m)  Fan Quantity 1 Power Supply 100-240VAC, 50/60Hz Power Consumption Maximum: 124.4W (220V/50Hz) PoE Ports (RJ45) Standard: 802.3 at compliant PoE Ports: Port 1- Port 8 PoE Power Budget: 110W Dimensions (W x D x H) 11.6*7.1*1.7 in. (294*180*44 mm) PERFORMANCE Switching Capacity 32Gbps Packet Forwarding Rate 23.8Mbps MAC Address Table 8K Packet Buffer Memory 4.1Mbit Jumbo Frame 9KB SOFTWARE FEATURES Quality of Service Support Port-Based/802.1p/DSCP priority Support 4 priority queues Rate Limit Storm Control L2 Features IGMP Snooping V1/V2/V3 Link Aggregation Port Mirroring Cable Diagnostics Loop Prevention VLAN Supports up to 128 VLANs simultaneously (out of 4K VLAN IDs) MTU/Port/Tag VLAN Management Web-based GUI Easy Smart Configuration Utility Transmission Method Store-And-Forward OTHERS Certification FCC, CE, RoHS Package Contents TL-SG1016PE Power Cord Installation Guide Resource CD Rackmount Kit Rubber Feet System Requirements Microsoft® Windows® for running Utility Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing   What This Product Does The TL-SG1016PE is an 16-Port Gigabit Desktop/Rack mountable Switch with 8 ports supporting the PoE+ standard. It provides a simple way to expand a wired network by transferring power and data over a single Ethernet Cable. With a total power budget of 110W, up to 30W per port, TL-SG1016PE can power more high-powered devices such as wireless Access Points (APs), IP Cameras or IP Phones. Moreover, with innovative energy-efficient technology, the TL-SG1016PE can save up to 75% of the power consumption, making it an eco-friendly solution for your business network. How This Product Works 8 ports of TL-SG1016PE support Power over Ethernet Plus (PoE+) standard which can automatically detect and supply power to any IEEE 802.3af/at compliant device(s). In this situation, the electrical power is transmitted along with data in a single cable, allowing you to expand your network where there are electrical cables or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones. Overload Arrangement TL-SG1016PE has a priority function which helps protect the system when its power is overloaded. If all PoE+ devices’ power consumption is greater than or equal to 110W, a priority will be arranged among the 16 PoE+ ports, at which point the system will cut off the power of the lowest-priority port.   Port Priority Function *Priority (port 1>port 2>port 3>port 4> port 5>port 6>port 7>port 8): This function will help protect the system if the system power becomes overloaded. For example, Port 1, 2, 3, 4, and 5 are using 30w (maximum power per port is 30W), the system power is 110w in total (PoE max LED will be green if all PoE PDs power consumption is >= 110W). If there is an additional PD inserted to Port 4 with 20w then the system will cut off Port 5 to protect the system, this means Port 1, 2,3, will use 90w, and Port 4 will use 20w, and no power will be supplied to Port 5. Easy To Use TL-SG1016PE is easy to install and use. It requires no configuration or installation. With its Desktop/Rack mountable design, outstanding performance and quality, the TP-LINK TL-SG1016PE 16-Port Gigabit Desktop/Rack mountable Switch with 8-Port PoE is a great choice for expanding your home or office network.  

Description: Details iShopping.pk brings you the best price for NVR 1TB HDD & 4 1080p Outdoor Network Bullet Cameras (BN-1424A1) with 1 year international warranty and express shipping all over Pakistan.     Specification:   NVR Video Inputs 4 x RJ45 with PoE Audio Input 1 channel, RCA (2.0 V p-p, 1 kOhm) reserved Bandwidth Incoming: 40 Mbps Outgoing: 80 Mbps Recording Resolution 2688 x 1520, 1080p, 720p, VGA, 4CIF Frame Rates Main Stream: 30 fps Sub-Stream: 30 fps Video Outputs HDMI and VGA at 60 Hz: 1920 x 1080, 1600 x 1200, 1280 x 1024, 1280 x 720, 1024 x 768 Audio Output 1-channel, RCA (linear, 1 kOhm) reserved Live View / Playback Resolution 2688 x 1520, 1080p, 720p, VGA, 4CIF Playback Simultaneous: 2 channels at 4 MP, 4 channels at 1080p HDD Capacity 1 TB preinstalled Network Interface RJ45 10/100 Mbps self-adaptive interface USB Ports 1 x USB 2.0 in front, 1 x USB 3.0 in rear PoE Interface 4 x independent 100 Mbps PoE Maximum Power PoE: 50 W PoE Standard 802.3af/at Power Supply 48 VDC Power Consumption Without PoE: ≤15 W Operating Temperature 14 to 131°F (-10 to 55°C) Operating Humidity 10 to 90% Form Factor 1U chassis Dimensions 12.4 x 9.1 x 1.8" (315 x 230 x 45 mm) Weight 4.4 lb (2 kg) Cameras Image Sensor 2 MP 1/2.8" progressive scan CMOS sensor Signal System NTSC Effective Pixels 1930 x 1088 Minimum Illumination 0.028 lux at f/2.0 (AGC on) 0 lux with IR LEDs on Shutter Time 1/3 to 1/100,000 sec Lens 4mm Lens Mount M12 Field of View Horizontal: 85° Vertical: 46° Diagonal: 99° Angle Adjustment Pan: 0-360° Tilt: 0-90° Rotation: 0-360° Day/Night IR cut filter Frame Rate 60 Hz: 30 fps at 1920 x 1080, 1280 x 720, and 704 x 480 Network RJ45 Ethernet with PoE IR LED Range Ambient Light: Up to 100' (30 m) Complete Darkness: Up to 65' (20 m) Operating Temperature -22 to 140°F (-30 to 60°C) Operating Humidity Power Supply PoE 802.3af Class 3 Power Consumption 7 W maximum IP Rating IP66 Dimensions 2.75 x 6.2" (70 x 157.4 mm) Weight 0.84 lb (0.4 kg)     Product Description:   •  Record from and Manage Up to 4 Cameras   •  1080p Recording Resolution per Camera   •  Preinstalled 1TB HDD   •  H.264 Dual Streaming Compression   •  4 4mm 1080p Outdoor Bullet Cameras   •  Camera Night Vision Up to 65'   •  99° Diagonal Field of View   •  HDMI and VGA Video Outputs   •  ezviz App for iOS and Android   •  IP66-Rated Cameras for Outdoor Use       Product Overview:   Monitor up to four outdoor areas with the  BN-1424A1 4-Channel 1080p NVR with 1TB HDD and 4 1080p Outdoor Network Bullet Cameras  from  ezviz. This kit comes with a 1080p NVR and four 1080p bullet cameras to help keep your home or business secure. The NVR comes with a 1TB HDD preinstalled to save video from all four cameras. Download the free ezviz app for iOS and Android in order to access a live feed on the go. The NVR features four independent PoE ports to provide network connection and power to connected cameras.   Each of the four cameras can capture 1080p resolution video at up to 30 fps for smooth playback. The cameras have a 4mm lens with a wide-angle 99° field of view to monitor large areas during the day and at night thanks to IR LEDs with a night vision range of up to 65'. Housed in an IP66-rated enclosure, the included cameras are suitable for outdoor use.   •  4-channel NVR with 1TB HDD   •  Four 1080p IP66-rated network bullet cameras record at up to 30 fps   •  Night vision range up to 65' in complete darkness   •  Dual streaming   •  NVR with four built-in PoE ports   •  Remote access via ezviz app for iOS and Android   •  Receive alerts via the mobile app for specified events  

Description: Details iShopping.pk brings you the best price for Ezviz 8 Channel 4MP NVR 2TB HDD & 4 4MP Outdoor Network Bullet Cameras (BN-1844A2) with 1 year international warranty and express shipping all over Pakistan.     Specification: NVR Video Inputs 8 x RJ45 with PoE Audio Input 1 channel, RCA (2.0 V p-p, 1 kOhm) reserved Bandwidth Incoming: 80 Mbps Outgoing: 80 Mbps Recording Resolution 4 MP (2688 x 1520), 1080p, 720p, VGA, 4CIF, CIF, QVGA, 640 x 360 Frame Rates Main Stream: 30 fps Sub-Stream: 30 fps Video Outputs HDMI and VGA at 60 Hz: 1920 x 1080, 1600 x 1200, 1280 x 1024, 1280 x 720, 1024 x 768 Audio Output 1 channel, RCA (linear, 1 kOhm) reserved Live View / Playback Resolution 4 MP (2688 x 1520), 1080p, 720p, VGA, 4CIF, CIF, QVGA, 640 x 360 Decoding 3 channels at 4 MP, 4 channels at 1080p, 8 channels at 720p HDD Capacity 2 TB preinstalled Network Interface RJ45 10/100/1000 Mbps self-adaptive interface USB Ports 1 x USB 2.0, 1 x USB 3.0 PoE Interface 8 x independent 100 Mbps PoE Maximum Power PoE: 120 W PoE Standard 802.3af/at Power Supply 100-240 VAC Power Consumption Without PoE: ≤15 W Operating Temperature 14 to 131°F (-10 to 55°C) Operating Humidity 10 to 90% Chassis Form Factor 15" (380 mm) 1U Dimensions 15 x 12.6 x 1.9" (380 x 320 x 48 mm) Weight 6.6 lb (3 kg) Cameras Image Sensor 4 MP 1/2.8" progressive scan CMOS sensor Signal System NTSC Effective Pixels 2688 x 1520 Minimum Illumination 0.01 lux at f/1.2 (AGC on) 0 lux with IR LEDs on Shutter Time 1/3 to 1/100,000 sec Lens 4mm Lens Mount M12 Field of View Horizontal: 83° Vertical: 44.7° Diagonal: 97.6° Angle Adjustment Pan: 0-360° Tilt: 0-90° Rotation: 0-360° Day/Night IR cut filter with auto-switch Frame Rate 30 fps at 4 MP Network RJ45 Ethernet with PoE IR LED Range Ambient Light: Up to 100' (30 m) Complete Darkness: Up to 65' (20 m) Operating Temperature -22 to 140°F (-30 to 60°C) Operating Humidity Power Supply PoE 802.3af Power Consumption 4 W maximum IP Rating IP66 Dimensions 2.75 x 6.46" (70 x 164.2 mm) Weight 0.88 lb (0.4 kg)   Product Description: •  Record from and Manage Up to 8 Cameras •  4MP Recording Resolution per Camera •  Preinstalled 2TB HDD •  Dual Streaming Compression •  4 4mm 4MP Outdoor Bullet Cameras •  Camera Night Vision Up to 65' •  97.6° Diagonal Field of View •  HDMI and VGA Video Outputs •  ezviz App for iOS and Android •  IP66-Rated Cameras for Outdoor Use   Product Overview: Monitor up to four outdoor areas with the  BN-1844A2 8-Channel 4MP NVR with 2TB HDD and 4 4MP Outdoor Network Bullet Cameras Kit  from  ezviz. This kit comes with a 4MP NVR and four 4MP bullet cameras to help keep your home or business secure. The NVR comes with a 2TB HDD preinstalled to save video from all included cameras. Download the free ezviz app for iOS and Android to access a live feed on the go. The NVR features eight PoE ports to provide network connection and power to cameras. This kit works with Amazon Alexa when used with IFTTT (available separately). Each of the four cameras can capture 2688 x 1520 resolution video at up to 30 fps for smooth playback. The cameras have a 4mm lens with a wide-angle 97.6° field of view to monitor large areas during the day and at night thanks to IR LEDs with a night vision range of up to 65'. Housed in an IP66-rated enclosure, the included cameras are suitable for outdoor use. •  8-channel NVR with 2TB HDD •  Four 4MP IP66-rated network bullet cameras record at up to 30 fps •  Night vision range up to 65' in complete darkness •  Dual streaming •  NVR with 8 built-in PoE ports •  Remote access via ezviz app for iOS and Android •  Receive alerts via the mobile app for specified events

Description: Details iShopping.pk brings you the best price for Ezviz 4 Channel 4MP NVR 2TB HDD & 4 4MP Network Cameras (BN-1444A2) with 1 year international warranty and express shipping all over Pakistan.     Specification: NVR Video Inputs 4 x RJ45 with PoE Audio Input 1 channel, RCA (2.0 V p-p, 1 kOhm) reserved Bandwidth Incoming: 40 Mbps Outgoing: 80 Mbps Recording Resolution 4 MP (2688 x 1520), 1080p, 720p, VGA, 4CIF, CIF, QVGA, 640 x 360 Frame Rates Main Stream: 30 fps Sub-Stream: 30 fps Video Outputs HDMI and VGA at 60 Hz: 1920 x 1080, 1600 x 1200, 1280 x 1024, 1280 x 720, 1024 x 768 Audio Output 1 channel, RCA (linear, 1 kOhm) reserved Live View / Playback Resolution 4 MP (2688 x 1520), 1080p, 720p, VGA, 4CIF, CIF, QVGA, 640 x 360 Decoding 2 channels at 4 MP, 4 channels at 1080p HDD Capacity 2 TB preinstalled Network Interface RJ45 10/100/1000 Mbps self-adaptive interface USB Ports 1 x USB 2.0, 1 x USB 3.0 PoE Interface 4 x independent 100 Mbps PoE Maximum Power PoE: 50 W PoE Standard 802.3af/at Power Supply 48 VDC Power Consumption Without PoE: ≤15 W Operating Temperature 14 to 131°F (-10 to 55°C) Operating Humidity 10 to 90% Chassis Form Factor 1U Dimensions 12.4 x 9.1 x 1.8" (315 x 230 x 45 mm) Weight 4.4 lb (2 kg) Cameras Image Sensor 4 MP 1/2.8" progressive scan CMOS sensor Signal System NTSC Effective Pixels 2688 x 1520 Minimum Illumination 0.01 lux at f/1.2 (AGC on) 0 lux with IR LEDs on Shutter Time 1/3 to 1/100,000 sec Lens 4mm Lens Mount M12 Field of View Horizontal: 83° Vertical: 44.7° Diagonal: 97.6° Angle Adjustment Pan: 0-360° Tilt: 0-90° Rotation: 0-360° Day/Night IR cut filter with auto-switch Frame Rate 30 fps at 4 MP Network RJ45 Ethernet with PoE IR LED Range Ambient Light: Up to 100' (30 m) Complete Darkness: Up to 65' (20 m) Operating Temperature -22 to 140°F (-30 to 60°C) Operating Humidity Power Supply PoE 802.3af Power Consumption 4 W maximum IP Rating IP66 Dimensions 2.75 x 6.46" (70 x 164.2 mm) Weight 0.88 lb (0.4 kg) Product Description: •  Record from and Manage Up to 4 Cameras •  4MP Recording Resolution per Camera •  Preinstalled 2TB HDD •  Dual Streaming Compression •  4 4mm 4MP Outdoor Bullet Cameras •  Camera Night Vision Up to 65' •  97.6° Diagonal Field of View •  HDMI and VGA Video Outputs •  ezviz App for iOS and Android •  IP66-Rated Cameras for Outdoor Use   Product Overview: Monitor up to four outdoor areas with the  BN-1444A2 4-Channel 4MP NVR with 2TB HDD and 4 4MP Outdoor Network Bullet Cameras Kit  from  ezviz. This kit comes with a 4MP NVR and four 4MP bullet cameras to help keep your home or business secure. The NVR comes with a 2TB HDD preinstalled to save video from all included cameras. Download the free ezviz app for iOS and Android to access a live feed on the go. The NVR features four PoE ports to provide network connection and power to cameras. This kit works with Amazon Alexa when used with IFTTT (available separately). Each of the four cameras can capture 2688 x 1520 resolution video at up to 30 fps for smooth playback. The cameras have a 4mm lens with a wide-angle 97.6° field of view to monitor large areas during the day and at night thanks to IR LEDs with a night vision range of up to 65'. Housed in an IP66-rated enclosure, the included cameras are suitable for outdoor use. •  4-channel NVR with 2TB HDD •  Four 4MP IP66-rated network bullet cameras record at up to 30 fps •  Night vision range up to 65' in complete darkness •  Dual streaming •  NVR with 4 built-in PoE ports •  Remote access via ezviz app for iOS and Android •  Receive alerts via the mobile app for specified events