Redblack selectable 2

Description: Details iShopping.pk brings you the best price for TP-Link 2.4GHz 300Mbps 9dBi Outdoor CPE (CPE210) with express shipping all over Pakistan.   Features: • Built-in 9dBi 2x2 dual-polarized directional MIMO antenna •  Adjustable transmission power from 0 to 27dBm/500mw •  System-level optimizations for more than 5km long range wireless transmission •  TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications •  Centralized Management System – Pharos Control •  AP / Client / Bridge / Repeater / AP Router / AP Client Router (WISP) operation modes •  Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely • Outdoor stabilized enclosure with IPX5 waterproof certification • Dual Ethernet ports and grounding terminal integrated • 6KV Lightning Protection, 15KV ESD Protection • Provides WEP, WPA/WPA2, WPA-PSK/WPA2-PSK data security • Selectable bandwidth of 5/10/20/40MHz • Provides Throughput Monitor, Spectrum Analyzer, Speed Test and Ping tools • Easy antenna alignment with wireless signal quality indicators via Web interface   Specification: HARDWARE Processor Qualcomm Atheros 560MHz CPU, MIPS 74Kc Memory 64MB DDR2 RAM, 8MB Flash Interface 1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in) 1 10/100Mbps Shielded Ethernet Port (LAN1, Passive PoE Passthrough) 1 Grounding Terminal 1 Reset Button Power Supply Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins) Voltage range: 16-27VDC Power Consumption 10.5 Watts Max Note: When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable. Dimensions (W x D x H) 224 x 79 x 60 mm Antenna Type Built-in 9dBi 2x2 Dual-polarized Directional Antenna Beam Width: 65° (H-Plane) / 35° (E-Plane) Note: For more details, please refer to datasheet Protection 15KV ESD Protection 6KV Lightning Protection Enclosure Outdoor ASA stabilized plastic material IPX5 waterproof Certification WIRELESS  Wireless Standards IEEE 802.11b/g/n (with Pharos MAXtream disabled) Proprietary Protocol TDMA Mode (with Pharos MAXtream enabled) Wireless Speeds Up to 300Mbps (40MHz,Dynamic) Up to 144.4Mbps (20MHz,Dynamic) Up to 72.2Mbps (10MHz,Dynamic) Up to 36.1Mbps (5MHz,Dynamic) Frequency 2.4~2.483GHz Note: Available operating frequency may vary depending on the limitations of the countries or regions in which the device is used. Transmission Power 27dBm/500mw (Adjustable power by 1dBm) Note: Maximum transmission power may vary across different channels depending on the limitations of the countries or regions in which the device is used. SOFTWARE Wireless Configurations Pharos MAXtream TDMA Technology 802.11b/g/n Modes Selectable Channel Width: 5/10/20/40MHz Automatic Channel Selection Transmission Power Control Dynamic Frequency Selection (DFS) WDS Enable/Disable Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption SSID Broadcast Enable/Disable Multi-SSID with VLAN Tagging (AP mode only) Distance/ACK Timeout Setting Wireless MAC Address Filter Wireless Advanced: > Beacon Interval/RTS Threshold/Fragmentation >Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia Management Discovery and Remote Management via Pharos Control application HTTP/HTTPS Web-based management System Log SNMP Agent(v2c) Ping Watch Dog Dynamic DDNS SSH Server System Tools Wireless Signal Quality Indicators: Signal Strength/Noise/Transmit CCQ/CPU/Memory Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP Spectrum Analyzer Speed Test Ping Traceroute System-level Optimizations Optimized IGMP Snooping/Proxy for multicast applications Hardware watch dog POE ADAPTER Dimensions(W x D x H) 110*57*33.5mm Input Current 0.8A Max @ 100VAC Input Voltage 100VA~240VAC @ 50Hz~60Hz Output 24VDC, 1.0A Max +4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet) Efficiency >80% Output Voltage 24VDC(+4,5pins; -7,8pins) Input 100-240VAC, 50/60Hz Power Status LEDs 0~0.8A: Green 0.8A~1.0A: Red Certifications CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark Interfaces 1 AC Jack with Earth Ground 1 10/100/1000Mbps Shielded Ethernet Port (Power + Data) 1 10/100/1000Mbps Shielded Ethernet Port (Data) Button Remote Reset Button OTHERS Certification CE, FCC, RoHS, IPX5 System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux. Note: We recommend you to use one of following Web browsers for an improved user experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended. Environment Operating Temperature: -30°C~70°C (-22℉~158℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~95% non-condensing   TP-LINK’s 2.4GHz 300Mbps 9dBi Outdoor CPE, the CPE210 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications.  Professional performance, coupled with user-friendly design, makes CPE210 an ideal choice for both business and home users.     Enterprise Hardware With Qualcomm Atheros enterprise level chipsets, high gain antennas and high quality material, specially designed enclosure, and PoE power supply, CPE210 is specially designed for outdoor use and can operate flawlessly in almost any climate, with operating temperatures ranging from -40℃ (-40℉) to +70 ℃ (158℉).   Advanced Antenna System Built-in High Gain Dual-Polarized Antenna  Dedicated metal reflector ensures higher gain  and lower noise interference   5km+ Wireless Data Transmission Specially designed for outdoor uses, ideal for long distance wireless data transmis sion over 5km+, tested in the field.     TP-LINK MAXtream TDMA Technology As network scale increases, wireless competition and collisions among CPEs and base stations will be so enormous that the real throughput of the network will drop, resulting in a serious impact on end-user experience. To mitigate these effects, the CPE210 uses MAXtream TDMA Technology.   Pharos Control – Centralized Management System CPE210 also comes equipped with centralized management software that helps users easily manage all the devices in their network from a single PC - Pharos Control. Functions like device discovery, status monitoring, firmware upgrading, and network maintenance can be managed using Pharos Control.   PharOS User-friendly web-based management system allows professionals to do more specific configurations.

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 128V Audio DSP Mixer with express shipping all over Pakistan.   The CONVERGE Pro 2 128V Audio DSP Mixer from ClearOne is a complete conferencing solution with 12 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in VoIP interface for 2 lines. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection. The mixer comes with built-in VoIP for VoIP conferencing. The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.   Features: Architecture • 12 mic/line inputs with AEC •  Built-in VoIP for 2 lines •  Built-in USB for PC-based conferencing Scalable Connectivity •  Standalone and daisy-chained system •  Stack up units up to 96 mic/line inputs •  Expansion bus C-Link with 64 channels •  P-Link bus to connect 6 peripherals Configuration & Management •  CONSOLE software •  Auto-discovery of devices •  Matrix View for entire system •  FlowView for visualized audio signal paths •  System monitoring and troubleshooting Audio Signal Processing •  Acoustic Echo Cancellation processing •  Distributed Echo Cancellation on every mic input •  Noise cancellation with Adaptive-Ambience •  Acoustic Intelligence with faster convergence •  DARE feedback elimination •  Microphone gating Flexible Control Options •  Dialer app for Windows, Mac, iOS, and Android •  Tabletop controller with a touch panel •  Wall controller with buttons •  Web-based controller Supports 3rd-party control modules   Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) VoIP Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation Audio: 5 lines (2 default + 3 lines through license), each line supporting 1+5 calls Sample Rate: 24 kHz Sample Bit Depth: 24-bit Codec: G.711 uLaw, G.711 ALaw, G.722 Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: Proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 48T Audio DSP Mixer with express shipping all over Pakistan.     The CONVERGE Pro 2 48T Audio DSP Mixer from ClearOne is a complete conferencing solution with 4 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in Telco interface for teleconferencing. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection.   The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.     Features: Architecture • 4 mic/line inputs with AEC •  Built-in Telco with ClearEffect processing •  Built-in USB for PC-based conferencing Scalable Connectivity •  Standalone and daisy-chained system •  Stack up units up to 96 mic/line inputs •  Expansion bus C-Link with 64 channels •  P-Link bus to connect 6 peripherals Configuration & Management •  CONSOLE software •  Auto-discovery of devices •  Matrix View for entire system •  FlowView for visualized audio signal paths •  System monitoring and troubleshooting Audio Signal Processing •  Acoustic Echo Cancellation processing •  Distributed Echo Cancellation on every mic input •  Noise cancellation with Adaptive-Ambience •  Acoustic Intelligence with faster convergence •  DARE feedback elimination •  Microphone gating Flexible Control Options •  Dialer app for Windows, Mac, iOS, and Android •  Tabletop controller with a touch panel •  Wall controller with buttons •  Web-based controller •  Supports 3rd-party control modules     Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Amplifier Output Speaker Output Port: Dual binding posts Audio: 2 x Channel Output Power: Maximum 10 W, 8 Ohms load Frequency Response: 20 Hz to 22 kHz @ +10 dBu, +/- 0.5 dBu THD + N: 20 Hz to 22 kHz @ +10 dBu, 1 W, Dynamic Range: 20 Hz to 22 kHz @ 20 dB, >102dB, with 20 kHz digital low pass filter Crosstalk: Channel to Channel, stimulus at 20 dBu, 10 W output to receptor 8⿦ load, 20 Hz to 22 kHz, Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 128T Audio DSP Mixer with express shipping all over Pakistan.   The CONVERGE Pro 2 128T Audio DSP Mixer from ClearOne is a complete conferencing solution with 12 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in Telco interface for teleconferencing. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection. The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.   Features: Architecture 12 mic/line inputs with AEC Built-in Telco with ClearEffect processing Built-in USB for PC-based conferencing Scalable Connectivity Standalone and daisy-chained system Stack up units up to 96 mic/line inputs Expansion bus C-Link with 64 channels P-Link bus to connect 6 peripherals Configuration & Management CONSOLE software Auto-discovery of devices Matrix View for entire system FlowView for visualized audio signal paths System monitoring and troubleshooting Audio Signal Processing Acoustic Echo Cancellation processing Distributed Echo Cancellation on every mic input Noise cancellation with Adaptive-Ambience Acoustic Intelligence with faster convergence DARE feedback elimination Microphone gating Flexible Control Options Dialer app for Windows, Mac, iOS, and Android Tabletop controller with a touch panel Wall controller with buttons Web-based controller Supports 3rd-party control modules   Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: Proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

Description: Details iShopping.pk brings you the best price for TP-Link 2.4GHz 300Mbps 12dBi Outdoor CPE (CPE220) with express shipping all over Pakistan.   Features: • Built-in 12dBi 2x2 dual-polarized directional MIMO antenna •  Adjustable transmission power from 0 to 30dBm/1000mw •  System-level optimizations for more than 13km long range wireless transmission •  TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications •  Centralized Management System – Pharos Control •  AP / Client / Bridge / Repeater / AP Router / AP Client Router (WISP) operation modes •  Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely   Specification: HARDWARE Processor Qualcomm Atheros 560MHz CPU, MIPS 74Kc Memory 64MB DDR2 RAM, 8MB Flash Interface 1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in) 1 10/100Mbps Shielded Ethernet Port (LAN1, Passive PoE Passthrough) 1 Grounding Terminal 1 Reset Button Power Supply Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins) Voltage range: 16-27VDC Power Consumption 10.8 Watts Max Note: When deployed using Passive PoE, the power drawn from the power source will  be higher by some amount depending on the length of the connecting cable. Dimensions (W x D x H) 11×3.1×2.1 inch (276×79×60 mm) Antenna Type Built-in 12dBi 2x2 Dual-polarized Directional Antenna Beam Width: 60° (H-Plane) / 30° (E-Plane) Note: For more details, please refer to datasheet Protection 15KV ESD Protection 6KV Lightning Protection Enclosure Outdoor ASA stabilized plastic material IPX5 waterproof Certification WIRELESS Wireless Standards IEEE 802.11b/g/n (with Pharos MAXtream disabled) Proprietary Protocol TDMA Mode (with Pharos MAXtream enabled) Wireless Speeds Up to 300Mbps (40MHz,Dynamic) Up to 144.4Mbps (20MHz,Dynamic) Up to 72.2Mbps (10MHz,Dynamic) Up to 36.1Mbps (5MHz,Dynamic) Frequency 2.4~2.483GHz Note: Available operating frequency may vary depending on the limitations  of the countries or regions in which the device is used. Transmission Power 30dBm/1000mw (Adjustable power by 1dBm) Note: Maximum transmission power may vary across different channels depending  on the limitations of the countries or regions in which the device is used. SOFTWARE Wireless Configurations Pharos MAXtream TDMA Technology 802.11b/g/n Modes Selectable Channel Width: 5/10/20/40MHz Automatic Channel Selection Transmission Power Control Dynamic Frequency Selection (DFS) WDS Enable/Disable Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption SSID Broadcast Enable/Disable Multi-SSID with VLAN Tagging (AP mode only) Distance/ACK Timeout Setting Wireless MAC Address Filter Wireless Advanced: > Beacon Interval/RTS Threshold/Fragmentation >Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia Management Discovery and Remote Management via Pharos Control application HTTP/HTTPS Web-based management System Log SNMP Agent(v2c) Ping Watch Dog Dynamic DDNS SSH Server System Tools                                     Wireless Signal Quality Indicators: Signal Strength/Noise/Transmit CCQ/CPU/Memory Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP Spectrum Analyzer Speed Test Ping Traceroute System-level Optimizations Optimized IGMP Snooping/Proxy for multicast applications Hardware watch dog POE ADAPTER Dimensions(W x D x H) 110×57×33.5mm Input Current 0.8A Max @ 100VAC Input Voltage 100VA~240VAC @ 50Hz~60Hz Output 24VDC, 1.0A Max +4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet) Efficiency >80% Output Voltage 24VDC(+4,5pins; -7,8pins) Input 100-240VAC, 50/60Hz Power Status LEDs 0~0.8A: Green 0.8A~1.0A: Red Certifications CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark Interfaces 1 AC Jack with Earth Ground 1 10/100Mbps/1000Mbps Shielded Ethernet Port (Power + Data) 1 10/100Mbps/1000Mbps Shielded Ethernet Port (Data) Button Remote Reset Button OTHERS Certification CE, FCC, RoHS, IPX5 System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7,  MAC OS, NetWare, UNIX or Linux. Note: We recommend you to use one of following Web browsers for an improved user  experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended. Environment Operating Temperature: -40°C~70°C (-40℉~158℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~95% non-condensing   TP-LINK’s 2.4GHz 300Mbps 12dBi Outdoor CPE, the CPE220 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications.  Professional performance, coupled with user-friendly design, makes CPE220 an ideal choice for both business and home users. Enterprise Hardware With Qualcomm Atheros enterprise level chipsets, high gain ante nnas and high quality material, specially designed enclosure, and P oE power supply, CPE220 is specially designed for outdoor use and can operate flawlessly in almost any climate, with operating temperatures ranging from -40℃ (-40℉) to +70 ℃ (158℉).     Advanced Antenna System Built-in High Gain Dual-Polarized Antenna  Dedicated metal reflector ensures higher gain  and lower noise interference   13km+ Wireless Data Transmission Specially designed for outdoor uses, ideal for long distance wireless data transmission over 13km+, tested in the field.     TP-LINK MAXtream TDMA Technology As network scale increases, wireless competition and collisions among CPEs and base stations will be so enormous that the real throughput of the network will drop, resulting in a serious impact on end-user experience. To mitigate these effects, the CPE220 uses MAXtream TDMA Technology.   Pharos Control – Centralized Management System CPE220 also comes equipped with centralized management software that helps users easily manage all the devices in their network from a single PC - Pharos Control. Functions like device discovery, status monitoring, firmware upgrading, and network maintenance can be managed using Pharos Control.   PharOS User-friendly web-based management system allows professionals to do more specific configurations.

Description: Details iShopping.pk brings you the best price for AKG CS 5 IRT 2 Large Mountable Infrared Conference Transmitter with express shipping all over Pakistan.   The CS 5 IRT 2 Large Mountable Infrared Conference Transmitter from AKG is a wireless, infrared radiator for the CS 5 Conference System that is capable of transmitting up to seven language translation channels to the CS 5 IRR 7 infrared receivers. The CS 5 IRT 2 is the larger of the two radiator transmitters available for the CS 5 Conference System and it has a transmission coverage area of 10,750 square feet. Each CS 5 IRT 2 comes complete with a mounting bracket for installation on a wall or ceiling.   Features: • Daisychainable with other transmitters via coaxial cable   Specifications: Input/Output Connectors BNC/Coaxial Input Voltage 0-5 V / 50 ohms Output Voltage 0-5 V / 50 ohms Power Voltage 200-240V 50/60Hz, 1.5A or 100-120V 50/60Hz, 3.15A (internally selectable) Wavelength 870 nm Radiated Power 3.8 W Coverage Angle ±22 degrees (50% down) Coverage Area 10,750 sq.ft. / 1000 m2 Dimensions (W x H x D) 10.3 x 12.1 x 3.0" (264 x 307 x 77 mm) Weight 8.9 lb (4 kg)

A4Tech FB35 2.4G Bluetooth Mouse Features: Bluetooth 4.0/3.0/2.4G: FB35 comes with dual mode — Bluetooth mode and 2.4GHz Wireless mode, which bring quick response, precise movement, stable connection & smoother tracking. Switch up to 4 Devices: 4 Devices can be connected at the same time. It realizes free switches between 3 devices only by one click. 2 Thumb Side Buttons: The side buttons are preset as backward and forward functions, and can be customized with software. 2000 DPI 4-Level Adjustable: Adjustable resolution 800-1000-1600-2000 DPI. 16-in-One: 16 gestures to perform selectable hotkey commands. On/Off Power Switch: Switch button on the back make this wireless mouse to perfect on-the-go companion. Online prices, specifications, description and images generally match actual, but may vary and are subject to change without notice. Vmart cannot be held liable for errors or omissions.Please verify the specifications at the time of purchase. No claim whatsoever would be accepted in case of specification error/mismatch, once the product is sold. SPECIFICATIONS: Sensor: Optical Distance: 5~10 m Report Rate: 125 Hz DPI: 800-1000-1600-2000 Buttons: 6 Style: Right-Handed Fit Receiver: Nano Receiver Demension: 105 x 70 x 42 (L*W*Hmm) Weight: 74 g (Batteries not included) System: Windows 7 / 8 / 8.1 /

A4Tech FG20 Grey 2.4G Wireless Mouse Key Features   Consistent Wireless Stability Advanced 2.4 GHz powerful wireless connection with distance up to 10-15m.     Adjustable Power Saving Adjustable 4-level Power Saving. It will be in sleep mode in 0.2s of inactivity.     2000 DPI 3-Level Adjustable Adjustable resolution 1000/1600/2000 DPI.     8-in-One 8 gestures to perform selectable hotkey commands.     Comfortable Symmetric Design Symmetric design allows it to fit both right and left hands.     4-Way Wheel Smart vertical and horizontal scrolling in the excel and website.

Description: Details iShopping.pk brings you the best price for VideoComm PRO Series 700 TVL Wireless Bullet Camera (ZX-700SR90) with 1 year international warranty and express shipping all over Pakistan.     Specification:   Operating Frequency 5.725 to 5.875 GHz Channels 8, user selectable Radiated Power 50 mv/m @ 10' (3 m) Range & Elevation (Line of Sight) From 300' (91 km) up to 4 miles (6 km); depending on the optional receiver & antenna (available separately) Antenna Type 3 dB omnidirectional rubber duck Antenna Connector SMA (female) Video Format NTSC Camera Type 1/3 Sony 960H CCD sensor Resolution 700 lines Lens Type 2.8-12mm varifocal IR Range 90' (27 m) Minimum Illumination 0.001 lux @ f/1.2 IR Cut Filter Automatic / Mechanical WDR Control Zone configurable backlight compensation SNR >50 dB White Balance Automatic Video Connector BNC (female) Video Impedance 75 Ohms @ 1 Vp-p OSD Adjust exposure, white balance, color, sharpness, motion detection on/off, privacy masking, monitor mode & dead pixel compensation Current Consumption 260 mA @ 12 VDC (IR off) / 600 mA @ 12 VDC (IR on) Power Connector 2.1 mm barrel jack Approvals FCC / IC Operating Temperature -40 to 170°F (-40 to 77°C) Mounting Brackets Integrated 3-axis cast aluminum wall-mount Construction IP66-rated cast aluminum Dimensions 3.3 x 5.5" (8.4 x 13.9 cm) Weight 2.2 lb (0.99 kg)     Product Description:   •  700 TVL Resolution   •  IR LEDs for 90' of Night Vision   •  2.8-12mm Varifocal Lens   •  Mechanical / Automatic IR Cut Filter   •  Wirelessly Transmit Video up to 4 Miles   •  5.725 - 5.875 GHz; 8 Selectable Channels   •  On Screen Display Menu   •  BNC Type Connection   •  Receiver Required for Video Transmission   •  IP66-Rated Housing for Outdoor Use       Product Overview:   Wirelessly transmit your video feed up to 4 miles away using the  PRO Series 700 TVL Outdoor Wireless Bullet Camera  from  VideoComm Technologies. The camera requires an antenna and receiver (available separately) for transmission, and it uses a 5.725 to 5.875 GHz operating frequency on eight user selectable channels for video output transmissions. This setup is suitable for use in applications such as parking lots, harbors, construction sites, and freeways.   The camera features a 1/3" Sony 960H CCD sensor for 700 TVL resolution, and it uses a 2.8-12mm varifocal lens with IR LEDs for up to 90' of night vision. There is an IR cut filter that can function mechanically or automatically, depending on your preference. Zone configurable backlight compensation and automatic white balance features assist in capturing clear images in ambient lighting. Furthermore, an OSD menu allows you to conveniently configure and adjust all of these settings. The wireless camera is placed in an IP66-rated weatherproof cast aluminum housing for outdoor use. In addition, the housing incorporates a sun-shield hood and an anti-glare lens.   Features   •  Supports 5.8 GHz FM-live real-time video transmission for up to 4 miles   •  2.8-12 varifocal lens   •  700 TVL resolution   •  IR LEDs for night vision up to 90'   •  External OSD menu control for convenient setup and picture adjustments   •  Universal 3-axis mounting bracket for easy installation and camera positioning   •  IP66-rated cast aluminum housing with sun-shield hood and anti-glare lens   Applications   •  Harbors   •  Parking Lots   •  Construction Sites   •  Freeways  

ALL PAKISTAN Distributor of UPS/Inverter, SOLAR INVERTER/UPS Dry/Acid Batteries, SOLAR PANEL SOLAR MODELS:(REC/APOLLO/HOMAGE/NS) Main Features Pure sine wave inverter Selectable input voltage range for home appliances and personal computers Selectable charging current based on applications Configurable AC/Solar input priority via LCD setting Compatible to mains voltage or generator power Auto restart while AC is recovering Modified Sine wave Inverter Charger UPS for Home and Office Chopper Based Technology Who Provides Long Time Backup for Home and Offices. Products: ModelS: C 1200 Capacity: 1200va, 720watts (Five (5) Fans and Five (5) Tube-light or Ten (10) Saver.) PF (Power Factor)=0.6 12Vdc Display: LCD +LED Display. C 2400 Capacity: 2400va, 1440Watts (Ten (10) Fans and Ten (10) Tube-lights or (20) Savers. PF (Power Factor) =0.6 24Vdc Display: LCD + LED Display. Charging: 10 & 20 Amp Selectable Features of C 1200 & C 2400. 1) Reverse Polarity Protection System. 2) 10-20Amp Dual Charging Option. 3) LED LCD Indicators. 4) Double Layer PCBA with Latest Controller Card Technology. 5) Made Using Advanced Designed PCBA Technology Used in Special Missions Warranty: 1 Year Complete (Parts and Repairing). ALLPAKISTAN SERVIC CENTRES Back-up Time Duration: All Back-up Time Duration, Depends on Battery Capacity and Charging HIDAYAT ULLAH KHAN SHOP # 2,3 KAMRAN CENTER ZARAJ PLAZA ,OPP: MILITRY ACCOUNT OFFICE SADDAR RAWALPINDI 051-5565020/03119601343 IMRAN SAEED SHOP # 7 ALAM PLAZA ,DAV COLLEGE ROAD RAWALPINDI 0515762000,0311-0085866

Description: Details iShopping.pk brings you the best price for TP-Link AC600 Wireless Dual Band USB Adapter (Archer T2U) with express shipping all over Pakistan.   Features: • 600 (433+150)Mbps wireless speed with 802.11ac • A tiny way to get speedy next generation Wi-Fi connections • Selectable Dual Band connections for lag-free HD video streaming and gaming • Advanced Security: Supports 64/128 WEP, WPA, PA2/WPA-PSK/WPA2-PSK (TKIP/AES) • Supports Windows 8.1/8/7/XP,Mac OS X 10.7~10.10 and Linux   Specifications: HARDWARE Interface USB 2.0 Dimensions (W x D x H) 1.6×0.7×0.3 in. (41×19.5×8.7mm) Antenna Type Omni Directional WIRELESS Wireless Standards IEEE 802.11ac, IEEE 802.11a, IEEE 802.11n, IEEE 802.11g, IEEE 802.11b Frequency 5GHz 2.4GHz Signal Rate 5GHz 11ac: Up to 433Mbps(dynamic) 11n: Up to 150Mbps(dynamic) 11a: Up to 54Mbps(dynamic) 2.4GHz 11n: Up to 150Mbps(dynamic) 11g: Up to 54Mbps(dynamic) 11b: Up to 11Mbps(dynamic) Reception Sensitivity 5GHz： 11a 6Mbps: -94dBm 11a 54Mbps: -78dBm 11n HT20 MCS0: -94dBm 11n HT20 MCS7: -77dBm 11n HT40 MCS0: -92dBm 11n HT40 MCS7: -74dBm 11ac VHT80 MCS0: -89dBm 11ac VHT80 MCS9: -64dBm 2.4GHz: 11b 1Mbps: -99dBm 11b 11Mbps: -91dBm 11g 6Mbps: -94dBm 11g 54Mbps: -77dBm 11n HT20 MCS0: -95dBm 11n HT20 MCS7: -76dBm 11n HT40 MCS0: -92dBm 11n HT40 MCS7: -73dBm Transmit Power Wireless Modes Ad-Hoc / Infrastructure mode Wireless Security Support 64/128 bit WEP, WPA-PSK/WPA2-PSK, 802.1x Modulation Technology DBPSK, DQPSK, CCK, OFDM, 16-QAM, 64-QAM OTHERS Certification CE, FCC, RoHS System Requirements Windows 8.1/8 (32/64bits), Windows 7 (32/64bits), Windows XP(32/64bits), Mac OS X 10.7~10.10, Linux Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing   802.11AC – The Next Generation of Wi-Fi TP-LINK's Archer T2U comes with the next generation Wi-Fi standard - The world’s fastest WiFi technology - 802.11ac, with transfer rates 3 times faster than wireless N speeds. It provides an easy way to upgrade even older laptops to next generation Wi-Fi.   AC 600 – Selectable dual band  speeds 433/150Mbps The T2U provides 433Mbps high speeds WiFi over the 5GHz band, making it ideal for HD video streaming and lag-free online gaming, while its 2.4GHz 150Mbps WiFi can be used for normal use such as web surfing with legacy devices.   Miniature Design – Easy to take on the road With its compact and sleek design, it’s smaller than most 11ac Wi-Fi USB adapters available and easy to take on the road. Users can connect the mini adapter to any USB port.   Sleek and Stylish – High standard production process Doubleshot molding - Our advanced molding technology gives the Archer T2U its crystal clear surface, while our strict polishing treatment produces a smooth and soft surface with a high quality touch.

Description: Details iShopping.pk brings you the best price for AKG CS3 BU Conference Base Unit with express shipping all over Pakistan.   The  AKG CS3 BU Conference Base Unit  is the base unit for the CS3 conference system which is designed for fixed and mobile conference applications, and provides all the necessary inputs and outputs to manage a conference for up to 60 microphone stations. It is the interface to all audio devices in a meeting room and offers a RS-232 interface to connect an optional camera control system (sold separately). The CS3 BU Base Unit can even work in a stand-alone mode in 4 selectable operating modes, namely, Override, Normal, Free, and Request, thereby offering maximum flexibility in conference management. With the NOM limitation function, the maximum number of active stations can be programmed to 1, 2, 4, or 6 simultaneous open microphones. Adjustable bass, treble, and master volume are also featured. If necessary, two CS3 BU units can be combined to control a large conference system with up to 120 microphone stations.   All-In-One Conference Controller For discussion systems of up to 60 stations per base unit Four Selectable Operating Modes For flexible conference management Connects to All Relevant Devices Can be connected to a PA, recording device, external audio and camera control systems Extension Interface Combines 2 units to control up to 120 stations Compact 19" Housing For easy rack mounting   Additional Features: • Capable of supporting 60 microphone units • Specific 8-pin DIN plug • Bus connection mode • 2-Channel mono audio inputs • 2-Channel mono original audio outputs • Adjustable maximum number of active microphones with 1,2,4, and 6 options • Four conference modes: Override, Normal, Free, and Request • Adjustable bass, treble, and master volume • Video tracing function through the central control output • Remote telephone conference along with telephone coupler   Specifications: Power Supply SMPS 100 to 240V (50 Hz / 60 Hz) 3 A Consumption Static: 13 W Nominal Power: 320 W Output Power ≤ 90 W / 24 V each way Mode Balanced / Unbalanced Frequency Response 50 Hz to 20 kHz S/N Ratio >80 dB THD Distortion: Distortion at Overload: Crosstalk Attenuation >50 dB (1 kHz) Operating Temperature 32 to 104°F (0 to 40°C) at 95% relative humidity (non-condensing) Dimensions (L x W x H) 18.9 x 11.0 x 3.4" (482.0 x 281.0 x 88.4 mm) Weight 11.4 lb (5.2 kg)

Description: Details iShopping.pk brings you the best price for Toa Electronics Wireless Neck Worn Microphone (IR-300M) with express shipping all over Pakistan.   The TOA IR-300M IR Wireless Neck Worn Microphone is intended to be used with the TOA Infrared Wireless microphone system. The microphone features an adjustable neck strap and a high quality condenser microphone with a wide frequency response. There are 2 user selectable frequency channels to choose from and the infrared light emission may be adjusted for best results.   Features: • Easy-to-wear, neck-suspended design • Lightweight body • Adjustable infrared light emission at 2 levels • Two selectable channel frequencies • Antibacterial treatment • Employs an electret condenser microphone unit • Low battery indicator • Can be used with a built-in microphone or external microphone • External MIC input level adjustment function allows for sensitivity adjustment • Color-coded ID stickers available   Specifications: Transducer Condenser Polar Pattern Cardioid Transmitter Neck Worn Bodypack Carrier Frequency Channel A: 3.100MHz  Channel B: 3.350MHz Range Approx. 20m (65 ft) (Power selector switch: H, line of sight)  Approx. 15m (50 ft) (Power selector switch: N, line of sight) Sensitivity +/- 4.8kHz (1kHz, when SPL of 84dB is input) SPL 120dB SPL Frequency Response 100Hz to 12kHz Power 2x AA Alkaline or Rechargeable Batteries  Up to 8 hours with rechargeable Up to 6 hours with alkaline Dimensions (WxHxD) 2.52 x 3.59 x 1.07" (64 x 91.3 x 27.3mm) Weight 0.29 lb (130 g)

Description: Details iShopping.pk brings you the best price for Toa Electronics Wireless Handheld Microphone (IR-200M) with express shipping all over Pakistan.   The TOA IR-200M IR Wireless Handheld Microphone is intended to be used with the TOA Infrared Wireless microphone system. The microphone features a high quality cardioid, condenser capsule with a wide frequency response. There are 2 user selectable frequency channels to choose from and the infrared light emission may be adjusted for best results.   Features: • Designed for stable voice transmission •  Lightweight body •  Adjustable infrared light emission at 2 levels •  Two selectable channel frequencies •  Antibacterial treatment •  Employs an electret condenser microphone unit •  Low battery indicator •  Color-coded ID stickers available   Specifications: Transducer Condenser Polar Pattern Cardioid Transmitter Infrared Handheld Carrier Frequency Channel A: 3.100MHz  Channel B: 3.350MHz Range Approx. 20m (65 ft) (Power selector switch: H, line of sight)  Approx. 15m (50 ft) (Power selector switch: N, line of sight) Sensitivity +/- 4.8kHz (1kHz, when SPL of 84dB is input) SPL 120dB SPL Frequency Response 100Hz to 12kHz Power 2x AA Alkaline or Rechargeable Batteries  Up to 8 hours with rechargeable Up to 6 hours with alkaline Dimensions (LxDiameter) 9.52 x 1.46" (241.8 x 37mm) Weight 0.37 lb (170 g)

"GUOOU" (USA Technology) Assembled in China highly intelligent and precise Paint Coating Thickness Gauge used to quickly & accurately measures the thickness of coating & planting on almost all kind of metal surfaces. It not only indicates thickness of coating or planting but also automatically identifies the base material. It is applicable to measure non magnetic painting, ceramic, enamel, plastic, rubber coating on magnetic base materials such as iron & steel, non ferrous metal planting such as nickel & chromium, anti corrosive coating, non conductive painting, plastic coating and anodic oxide film on non magnetic conductive devices. FUNCTIONS Measuring: Contentious & single measurement available Memory: 600 Data Store Unit: Metric/Imperial switchable (mil/um selectable) Calibration: Zero-in, 2 point Calibration and multi point calibration selectable Battery: Low Battery Indication Data Transfer: Bluetooth or USB APP: Mobile App (Play store) Window, Android App, IOS App Data Delete: Delete a single Data or all data function available SPECIFICATION Range: 0-1500 um/ 0-60 mil Resolution: 0.1 um / mil Accuracy: ± (1+2%um) Minimum Test Surface: ? 10mm Minimum Thickness of Base Material: 0.4mm Temperature: -10 Deg. C to +50 Deg. C