Reborn panel c buttons

Little giant care label printer Industrial printer for care label? You have anohter choice for care label printer, SBARCO T43R. SBARCO releases a model, T43R, for care label printer total solution. T43R is equipped exclusive cutter, label stacker and label roll holder which make the care label be printed and cut correctly without shifting and sticking problem during the printing process. The minimum cutting length is 10mm. 300 dpi printing resolution can print very fine characters, graphics and barcode. T43R overturns the concept of care label printer, a desktop printer can do the same work as industrial printer, even it is the most cost-effective. Total solution for care label printer 300 dpi printhead resolution for finest characters and graphics Exclusive label holder, stacker and cutter No shifting, no sticking in printing care label LCD monitor for selecting stored care label forms for standalone operation 10mm min. cutting length No sticking on 102mm. in printing and cutting width SD card and internal memory support hundreds forms The most cost-effective care label printer PRINT Resolution 300 dpi (12 dots/mm) Mode Thermal transfer Print speed 1 to 3 ips (25.4 to 76.2 mm) Max. print length 150” (3810 mm) Max. print width 4.1” (104 mm) Min. cutting length 0.39" (10mm) CPU 32 bit CPU MEMORY 8MB SDRAM 4MB Flash ROM SD slot for expansion, up to 32GB DISPLAY Backlight LCD display, 128 x 64 dots CONTROL PANEL 4 multiple functional LED light buttons, including error light SENSORS Reflective sensor Cover open sensor, ribbon sensor, label sensor COMMUNICATION Serial, USB master/slave, Ethernet (option) AUDIO Buzzer warning sound POWER External universal switching power supply BARCODE 1D Code39 stand or extended, Code39 with check digit, Code93, Code128 UCC, Code128 Auto A,B,C mode, EAN8, EAN8/13 2&5 digit add-on, EAN13, Interleaved 2 of 5, Interleaved 2 of 5 with check digit, Interleaved with human readable check digit, UCC/EAN 128, UPC-A, UPC-A 2&5 digit add-on, UPC-E, UPC-E 2&5 digit add-on, UPC Interleaved 2 of 5 2D PDF417, Maxicode, Data Matrix, QR code INTERNAL FONT 5 internal expandable bitmap fonts (alpha-numeric) 2 internal expandable bitmap fonts (numeric only) Downloadable soft font 4 directions: 0, 90, 180 and 270 degrees GRAPHICS PCX, Direct binary graphic CARE LABEL Type Care label Width 0.59”~4.33” (15 mm~110 mm) Thickness Max. 0.0059”(0.15 mm) Core diameter 3" (76.2mm) Max. roll diameter 10” (254 mm) RIBBON Type Outside coating resin ribbon Width 1”~4.3” (25.4 mm~110 mm) Max. length 110 M Max. OD 1.535” (39 mm) ID 0.5” (12.7 mm) ENVIRONMENT Operation 5°C ~45°C (40°F~104°F) Storage -20°C~50°C (-4°F~122°F) HUMIDITY Operation 10%~90% non-condensing Storage 5%~95% non-condensing DIMENSION Width 7.83” (200.00 mm) Length 10.36” (263.19 mm) Height 7.41” (188.29 mm) Weight 3.7 KG (with stacker) FACTORY DEFAULT 3" Cutter, stacker, label roll holder OPTION Ethernet printer server

Description: Details iShopping.pk brings you the best price for Lorex 16 Channel 4MP NVR with 3TB HDD and 9 3MP Outdoor Cameras Kit (LNR4163C6D33B) with 1 year international warranty and express shipping all over Pakistan.   Specification: System Operating System Linux embedded Pentaplex Operation Simultaneous view / record / playback / back up / remote monitoring Number of Channels 16 Inputs / Outputs Video Inputs 16 (16 x PoE) Video Outputs 1 x VGA 1 x HDMI Audio Input 1 x RCA line in (for service only) Audio Output 1 x RCA line out (for service only) USB Ports 1 x rear 1 x front Alarm Inputs 4 Alarm Outputs 2 Video Output Resolution 1920 x 1080 / 1280 x 1024 / 1280 x 720 / 1024 x 768 PTZ Control Lorex IP PTZ cameras only Display Display Split 1 / 4 / 9 / 16 Live Display Speed NTSC: 480 fps PAL: 400 fps OSD Menu Camera Title / Time / Camera Lock / Motion Detection / Recording Status System Navigation USB mouse / IR remote control / front panel buttons Motion Area Setting Adjustable grid (22 x 18) Motion Sensitivity 100 levels Firmware Upgrade Automatic over the internet & via USB device and network User Authority By user group Time Synchronization Auto time sync by NTP server Recording Video Compression H.264 and MJPEG Recording Resolution 4 MP (2688 x 1520), 3 MP (2048 x 1536), 1080p (1920 x 1080), 720p (1280 x 720) Recording Rate NTSC: 480 fps at up to 4 MP PAL: 400 fps at up to 4 MP Recording Resolution Setting Different resolutions per camera Recording Quality Control 6 levels Recording Schedule By hour / by day / by recording mode / by motion / by channel Pre Recording 4 seconds maximum Post Recording 5 minutes maximum Reliability Watch-Dog, auto-recovery after power failure Covert Video Yes Playback Playback Channels 1 / 4 / 9 / 16 Playback Speed Variable, maximum 16x Playback Players Backup Player Search By time and event Log Search Up to 1000 lines for motion detection, configuration changes, connects/disconnects, video loss Audio Play Yes (audio camera required) Storage & Archive Storage Type Up to 2 x SATA HDDs Maximum Capacity Preinstalled: 3 TB Capacity: 12 TB (2 x 6 TB) Backup Media USB Flash Drive, HDD Backup File Format H.264 Connectivity Cloud Connectivity FLIR Cloud Supported Operating Systems Windows, Mac OS X Remote Software Client Software for Windows and Mac OS X Email Notification Text with snapshot Mobile OS Support iOS and Android devices DDNS Lorex DDNS System Configuration Full setup configuration over network Ports Programmable by user Network Protocol and Standards HTTP, IPv4/IPv6, TCP/IP, UPNP, RTSP, UDP, SMTP, NTP, DHCP, DNS, PPPOE, DDNS, FTP, IP Filter Network Interface RJ45 10/100/1000 Mbps Ethernet Bit Rate Total: 320 Mbps Per Camera: 48 to 8192 kbps General Power Consumption Approximately 30 W (without HDD) Power Supply Voltage 100-240 VAC, 50/60 Hz PoE Power Output 130 W 25 W per camera maximum Operating Temperature 14 to 131°F (-10 to 55°C) Operating Humidity 10 to 90% RH Dimensions 14.7 x 12.9 x 2.1" (375 x 327 x 53 mm) Weight 5.5 lb (2.3 kg) 3MP Outdoor Bullet Camera Image Sensor 1/3" 3 MP progressive-scan Video Format NTSC / PAL Effective Pixels H: 2304 x V: 1536 Resolution 3 MP (2048 x 1536) @ 25 fps Signal to Noise Ratio > 56 dB (AGC off) Iris EIS Shutter Speed 1/3 (1/4) to 1/100,000 seconds Minimum Illumination Without IR: 0.7 lux With IR: 0.4 lux Lens 2.8mm fixed Aperture f/2.0 Field of View Horizontal: 75° Termination RJ45 Ethernet  12 VDC power barrel (optional) IR LED 850 nm Night Vision Range Ambient Lighting: 130' / 40 m Total Darkness: 90' / 27 m Power Requirement PoE Class 3 / 12 VDC Power Consumption Max: 285 mA / 3.4 W Operating Temperature -22 to 140°F / -30 to 60°C Operating Humidity Dimensions 6.1 x 2.7 x 2.8" / 15.5 x 6.9 x 7.1 cm Weight 0.9 lb / 0.4 kg     Product Description: •  Record from and Manage Up to 16 Cameras •   3MP Recording Resolution per Camera •   3TB Preinstalled HDD •   6 x 2.8mm 3MP Bullet Cameras Included •   3 x 2.8mm 3MP Dome Cameras Included •   Camera Night Vision Up to 130' or 115' •   75° Horizontal Field of View •   Remote Monitoring via FLIR Cloud App •   Compatible with Windows and Mac •   IP66-Rated Cameras for Outdoor Use   Product Overview: Monitor up to nine outdoor areas with the  16-Channel 4MP NVR with 3TB HDD and 9 3MP Outdoor Cameras Kit  from  Lorex by FLIR. The included network video recorder features 16 channels with PoE and records at a resolution as high as 4MP. The FLIR Cloud app allows you to monitor areas on a Windows or Mac computer, or while on the go using your iOS or Android device. The nine included cameras (six bullet and three dome) capture high-quality 2048 x 1536 resolution video during the day and at night thanks to IR LEDs around the lens. Video is compressed using H.264 and MJPEG codecs for bandwidth and storage conservation, while the 3TB preinstalled HDD allows you to store all recorded video. Nine Ethernet cables are included to connect the cameras to the NVR. LNR400S Series 16-Channel 4MP NVR with 3TB HDD Manage and record from up to 16 network cameras with the   LNR400S Series 16-Channel 4MP NVR with 3TB HDD   from   Lorex. This network video recorder features 16 channels with PoE and up to 4MP recording resolution. It has HDMI and VGA video outputs to connect to a monitor and display a live view in up to 1080p resolution. Additionally, the NVR offers full audio capabilities with RCA input and output interfaces. The NVR can record by hour, by day, by recording mode, by motion, or by channel. Furthermore, Pentaplex operation allows for simultaneous viewing, recording, playback, backing up, and remote monitoring. All recordings are compressed using H.264 and MJPEG codecs to maximize your storage and conserve bandwidth and saved onto the preinstalled 3TB HDD. With FLIR Cloud connection you can view live video and access the NVR from a web browser or via the iOS and Android apps. •   Full pentaplex operation to simultaneously view, record, playback, backup, and remotely control the system •   4MP recording resolution •   Real-time recording at 25/30 fps per channel •   16 built-in PoE ports for video and power over a single cable •   Automatically detects compatible IP cameras in the network •   24/7 security-grade hard drive •   H.264 and MJPEG video compression •   High-capacity storage expandable up to 12TB •   Simultaneous playback and live view on the same screen •   Selectable area digital zoom in live view and playback modes •   Continuous, scheduled, and motion recording modes •   Two video outputs to connect multiple monitor •   HDMI connection supports high-definition video output •   USB backup of live video from a selected camera •   Email alerts with snapshot attachments •   Dual streaming to conserve bandwidth •   Push notifications of motion events •   iOS and Android mobile apps with live viewing, playback, video recording, and snapshot functionality •   Compatible with Windows and Mac OS X •   3-step remote monitoring with FLIR Cloud •   Automatic firmware updates •   Accurate time stamps with NTP and daylight saving time •   Convenient front panel button controls •   Flip and mirror camera view settings •   Dynamic click-and-drag camera channel assignment   3MP Outdoor Bullet Camera With an IP66-rated weatherproof housing and cold climate functionality, the  3MP Outdoor Bullet Camera  from  Lorex  can be used in a wide range of indoor or outdoor applications. The camera uses a 1/3" 3MP progressive-scan sensor for up to 2048 x 1536 resolution at 25 fps, and it features a 2.8mm fixed lens for a 75° field of view. The lens is surrounded by IR LEDs, providing the camera with enough light for up to 130' of vision in ambient lighting, and up to 90' of vision in complete darkness. Additionally, an IR cut filter enables accurate color representation, and a Day/Night mode will automatically switch to black and white images for clear detail in low light conditions. The camera uses PoE technology for a simplified setup, and it includes a 60' UL-compliant Cat5e cable. Additionally, you can use a single Ethernet cable to extend the camera's video signal and power up to 300' from the recorder. •   High-definition 3MP progressive-scan sensor for clear, high-quality images •   Infrared cut filter provides accurate color representation •   IR LEDs for night vision up to 130' in ambient lighting and 90' in total darkness •   Picture automatically switches to B&W, delivering maximum clarity in low light •   75° horizontal field of view for a wide coverage area •   Power over Ethernet technology with Cat5e cables offers an easy installation •   Includes 60' UL-compliant cable for surface and in-wall installations •   Extend the camera's video and power up to 300' from the recorder with a single Ethernet cable •   Cold climate capability in temperatures as low as -22°F •   IP66-rated weatherproof for indoor or outdoor installations •   Ceiling or wall mountable for maximum flexibility    

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 128V Audio DSP Mixer with express shipping all over Pakistan.   The CONVERGE Pro 2 128V Audio DSP Mixer from ClearOne is a complete conferencing solution with 12 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in VoIP interface for 2 lines. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection. The mixer comes with built-in VoIP for VoIP conferencing. The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.   Features: Architecture • 12 mic/line inputs with AEC •  Built-in VoIP for 2 lines •  Built-in USB for PC-based conferencing Scalable Connectivity •  Standalone and daisy-chained system •  Stack up units up to 96 mic/line inputs •  Expansion bus C-Link with 64 channels •  P-Link bus to connect 6 peripherals Configuration & Management •  CONSOLE software •  Auto-discovery of devices •  Matrix View for entire system •  FlowView for visualized audio signal paths •  System monitoring and troubleshooting Audio Signal Processing •  Acoustic Echo Cancellation processing •  Distributed Echo Cancellation on every mic input •  Noise cancellation with Adaptive-Ambience •  Acoustic Intelligence with faster convergence •  DARE feedback elimination •  Microphone gating Flexible Control Options •  Dialer app for Windows, Mac, iOS, and Android •  Tabletop controller with a touch panel •  Wall controller with buttons •  Web-based controller Supports 3rd-party control modules   Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) VoIP Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation Audio: 5 lines (2 default + 3 lines through license), each line supporting 1+5 calls Sample Rate: 24 kHz Sample Bit Depth: 24-bit Codec: G.711 uLaw, G.711 ALaw, G.722 Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: Proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 48T Audio DSP Mixer with express shipping all over Pakistan.     The CONVERGE Pro 2 48T Audio DSP Mixer from ClearOne is a complete conferencing solution with 4 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in Telco interface for teleconferencing. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection.   The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.     Features: Architecture • 4 mic/line inputs with AEC •  Built-in Telco with ClearEffect processing •  Built-in USB for PC-based conferencing Scalable Connectivity •  Standalone and daisy-chained system •  Stack up units up to 96 mic/line inputs •  Expansion bus C-Link with 64 channels •  P-Link bus to connect 6 peripherals Configuration & Management •  CONSOLE software •  Auto-discovery of devices •  Matrix View for entire system •  FlowView for visualized audio signal paths •  System monitoring and troubleshooting Audio Signal Processing •  Acoustic Echo Cancellation processing •  Distributed Echo Cancellation on every mic input •  Noise cancellation with Adaptive-Ambience •  Acoustic Intelligence with faster convergence •  DARE feedback elimination •  Microphone gating Flexible Control Options •  Dialer app for Windows, Mac, iOS, and Android •  Tabletop controller with a touch panel •  Wall controller with buttons •  Web-based controller •  Supports 3rd-party control modules     Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Amplifier Output Speaker Output Port: Dual binding posts Audio: 2 x Channel Output Power: Maximum 10 W, 8 Ohms load Frequency Response: 20 Hz to 22 kHz @ +10 dBu, +/- 0.5 dBu THD + N: 20 Hz to 22 kHz @ +10 dBu, 1 W, Dynamic Range: 20 Hz to 22 kHz @ 20 dB, >102dB, with 20 kHz digital low pass filter Crosstalk: Channel to Channel, stimulus at 20 dBu, 10 W output to receptor 8⿦ load, 20 Hz to 22 kHz, Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 128T Audio DSP Mixer with express shipping all over Pakistan.   The CONVERGE Pro 2 128T Audio DSP Mixer from ClearOne is a complete conferencing solution with 12 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in Telco interface for teleconferencing. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection. The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.   Features: Architecture 12 mic/line inputs with AEC Built-in Telco with ClearEffect processing Built-in USB for PC-based conferencing Scalable Connectivity Standalone and daisy-chained system Stack up units up to 96 mic/line inputs Expansion bus C-Link with 64 channels P-Link bus to connect 6 peripherals Configuration & Management CONSOLE software Auto-discovery of devices Matrix View for entire system FlowView for visualized audio signal paths System monitoring and troubleshooting Audio Signal Processing Acoustic Echo Cancellation processing Distributed Echo Cancellation on every mic input Noise cancellation with Adaptive-Ambience Acoustic Intelligence with faster convergence DARE feedback elimination Microphone gating Flexible Control Options Dialer app for Windows, Mac, iOS, and Android Tabletop controller with a touch panel Wall controller with buttons Web-based controller Supports 3rd-party control modules   Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: Proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)