Power station

Description: Details iShopping.pk brings you the best price for AKG CS 5 DU Conference Delegate Microphone Station with express shipping all over Pakistan.   The CS 5 DU Conference Delegate Microphone Station by AKG is the basic microphone station for use with the CS 5 Conference System. The CS 5 microphone station is designed to provide both ergonomic and acoustic flexibility. Choose from two goosenecks of different lengths, and five microphones with different polar patterns to meet the various requirements of your particular conference system. There is also a push-to-talk (PTT) key so the conference delegate can easily engage or disengage their microphone for speaking. In addition to the PTT key, this microphone station offers a bank of dip switches that allows each of the two headphone outputs to be assigned independently to either the floor channel or one of three interpreted language channels. The PTT key also provides a simple yes/no voting function. The CS 5 DU is daisy chainable with other microphone stations using CAT 5/RJ 45 cables. Audio input and output, power and voting can all be distributed over the CAT 5/RJ 45 cables.   Features: • To be used with the CS 5 BU Base Unit and the CS 5 VU Voting/Chairperson Station • The PTT key also provides a simple yes/no voting function that is transmitted to the CS 5 VU Voting/Chairperson Station for tabulation • Up to twelve CS 5 DU microphone stations can be powered by one CS 5 PS 12 power supply   Specifications: Power Supply Supply Voltage 46 V, minimum  48 V, nominal  50 V, maximum Power Consumption 1.5 W, nominal  3 W, maximum Headphone Output Power 30 mW, nominal 60 mW, maximum Load Impedance 8 ohms, minimum  32, ohms, nominal Frequency Range 45 Hz - 22 kHz Audio Output Jack 1/4" TRS jack (tip - right, ring - left, sleeve - ground) Other Specifications Signal to Noise Ratio 70 dB I/O Connections 8-pin RJ45: Pin 1 - Data send + Pin 2 - data send - Pin 3 - data receive + Pin 4 - 48 VDC Pin 5 - 48 VDC Pin 6 - data receive - Pin 7 - ground Pin 8 - ground Dimensions (WxDxH) 10.1 x 5.8 x 1.9" (257 x 147 x 73 mm)

Description: Details iShopping.pk brings you the best price for AKG CS 5 IU Interpreter Microphone Station with express shipping all over Pakistan.   The CS 5 IU by AKG is an interpreter microphone station for the CS 5 conference system. The station can be used with a 12" or 20" gooseneck and is compatible with a variety of AKG microphone capsules. It has a 1/4" headphone out so the interpreter can monitor the source speaker, and an external microphone can be connected instead of the gooseneck in the event that the speaker wishes to use a different mic. There is also a built-in loudspeaker that can be used when personal monitoring is not required. The CS 5 IU has four selectable input channels available which include the floor channel, two pre-selected language channels and a relay-language channel that can be used if the interpreter is not qualified to interpret the source language. In addition, the CS 5 IU also includes features such as a cough button that allows the speaker to quickly mute the microphone, a "slow" signal button that sends a message to the source speaker's CS 5 IU station requesting that they slow their speech, and a signal button for requesting a technician's assistance.   Features: • Backlit liquid crystal display and microphone status LED • Daisychain with CS 5 DU delegate station, CS 5 VU voting station and CS 5 BU base station via CAT 5/RJ 45 for audio and power • Compatible with the 12" GN 30 CS and the 20" GN 50 CS goosenecks which both feature an LED ring • Compatible with the CK 31, CK 33 and the CK 47 capsules   Specifications: Power Supply Supply Voltage 46 V minimum, 48 V nominal, 50 V maximum Power Consumption 1.5 W nominal, 3 W maximum Microphone Inputs 1/4" TRS jack Frequency Range 100 Hz - 16 kHz S/N Ratio 60 dB Headphone Output Output 1/4" TRS jack Power 180 mW nominal, 250 mW maximum Load Impedance 8 - 32 ohm General System CAT5 8-pin RJ45 Dimensions 12.2 x 6.0 x 3.4" (310 x 152 x 86 mm) Weight 2.2 lb (1000 g)

Description: Details iShopping.pk brings you the best price for Toa Electronics Infrared Chairperson Station (TS-901) with express shipping all over Pakistan.   The  TS-901 chairperson station  is a remote microphone station used in the 900 series wireless conference system. The chairperson station features a priority switch that interrupts delegate stations whenever important messages need to get through. Optional long and short length gooseneck microphones are sold separately. Voting keys are featured to Start, End and Cast voting. Additional features include a built-in speaker, a headphone output with volume adjust and Talk button.   Features: Priority Control Switch The TS-901 features a priority switch that overrides the TS-902 delegate stations. This is a necessary feature for conference moderators and chairmen. Voting Keys Voting keys are featured to Start, End and Cast votes. Infrared Wireless Operation The 900 series conference systems feature infrared wireless operation for less bulk and easier configuration and setup. Headphone Output Built-in Headphone output with volume adjust is provided.   Specifications: Inputs Microphone Terminal: XLR-4-31 type for optional TS-903 or TS-904 gooseneck microphones Outputs Headphone: 1/8" (3.5mm) Mini Multi-Pin I/O Connectors Not Applicable Frequency Response Not Specified By Manufacturer Signal-to-Noise Ratio Not Specified By Manufacturer Distortion Not Specified By Manufacturer Power Requirements 7.4V DC (battery), 9V DC (AC Adapter)  Supplied from BP-900 battery or AD-0910 AC adapter Power Consumption 270 mA Dimensions 8.26 x 2.59 x 5.98" (210 x 65.9 x 152mm) (WxHxD) Weight 1.38 lb (630 g)

Description: Details iShopping.pk brings you the best price for Toa Electronics Infrared Chairperson Station (TS-801) with express shipping all over Pakistan.   The TOA 800 series conference system is a professional solution for wireless conference microphone operation in boardrooms, panel discussion groups, meeting halls, etc. The 800 series features secure infrared technology for wireless operation without bulky cables and wiring configurations. A functional system consists of a TS-800UL system controller, a TS-905 or TS-907 infrared transceiver and up to sixty-four TS-801 and TS-802 delegate / chairperson remote microphone stations. The TS-801 chairperson station is a remote microphone station used in the 800 series wireless conference system. The chairperson station features a priority switch that interrupts delegate stations whenever important messages need to get through. Optional long and short length gooseneck microphones are sold separately. Additional features include a built-in speaker, a headphone output with volume adjust and Talk button.   Features: Priority Control Switch The TS-801 features a priority switch that overrides the TS-802 delegate stations. This is a necessary feature for conference moderators and chairmen. Infrared Wireless Operation The 800 series conference systems feature infrared wireless operation for less bulk and easier configuration and setup. Headphone Output Built-in Headphone output with volume adjust is provided.   Specifications: Inputs Microphone Terminal: XLR-4-31 type  for optional TS-903 or TS-904 gooseneck microphones Outputs Headphone: 1/8" (3.5mm) Mini Multi-Pin I/O Connectors Not Applicable Frequency Response Not Specified By Manufacturer Signal-to-Noise Ratio Not Specified By Manufacturer Distortion Not Specified By Manufacturer Power Requirements 7.4V DC (battery), 9V DC (AC Adapter)  Supplied from BP-900 battery or AD-0910 AC adapter Power Consumption 270 mA Dimensions 8.26 x 2.59 x 5.98" (210 x 65.9 x 152mm) (WxHxD) Weight 1.38 lb (630 g)

Description: Details iShopping.pk brings you the best price for Toa Electronics Infrared Delegate Station (TS-902) with express shipping all over Pakistan.   The TOA 900 series conference system is a professional solution for wireless conference microphone operation in boardrooms, panel discussion groups, meeting halls, etc. The 900 series features secure infrared technology for wireless operation without bulky cables and wiring configurations. A functional system consists of a TS-900UL system controller, a TS-905 or TS-907 infrared transceiver and up to ninety-six TS-901 and TS-902 delegate / chairperson remote microphone stations. The TS-902 chairperson station is a remote microphone station used in the 900 series wireless conference system. The delegate station enables talkers to speak freely and remotely while monitoring the entire conversation. Optional long and short length gooseneck microphones are sold separately. Additional features include a built-in speaker, a headphone output with volume adjust and Talk button.   Features: Voting Keys Voting keys are featured to Start, End and Cast votes. Infrared Wireless Operation The 900 series conference systems feature infrared wireless operation for less bulk and easier configuration and setup. Headphone Output Built-in Headphone output with volume adjust is provided.   Specifications: Inputs Microphone Terminal: XLR-4-31 type  for optional TS-903 or TS-904 gooseneck microphones Outputs Headphone: 1/8" (3.5mm) Mini Multi-Pin I/O Connectors Not Applicable Frequency Response Not Specified By Manufacturer Signal-to-Noise Ratio Not Specified By Manufacturer Distortion Not Specified By Manufacturer Power Requirements 7.4V DC (battery), 9V DC (AC Adapter)  Supplied from BP-900 battery or AD-0910 AC adapter Power Consumption 270 mA Dimensions 8.26 x 2.59 x 5.98" (210 x 65.9 x 152mm) (WxHxD) Weight 1.38 lb (630 g)

Description: Details iShopping.pk brings you the best price for Toa Electronics Infrared Delegate Station (TS-802) with express shipping all over Pakistan.   The TOA 800 series conference system is a professional solution for wireless conference microphone operation in boardrooms, panel discussion groups, meeting halls, etc. The 800 series features secure infrared technology for wireless operation without bulky cables and wiring configurations. A functional system consists of a TS-800UL system controller, a TS-905 or TS-907 infrared transceiver and up to sixty-four TS-801 and TS-802 delegate / chairperson remote microphone stations. The TS-802 delegate station is a remote microphone station used in the 800 series wireless conference system. The delegate station enables talkers to speak freely and remotely while monitoring the entire conversation. Optional long and short length gooseneck microphones are sold separately. Additional features include a built-in speaker, a headphone output with volume adjust and Talk button.   Features: Infrared Wireless Operation The 800 series conference systems feature infrared wireless operation for less bulk and easier configuration and setup. Headphone Output Built-in Headphone output with volume adjust is provided.   Specifications: Inputs Microphone Terminal: XLR-4-31 type  for optional TS-903 or TS-904 gooseneck microphones Outputs Headphone: 1/8" (3.5mm) Mini Multi-Pin I/O Connectors Not Applicable Frequency Response Not Specified By Manufacturer Signal-to-Noise Ratio Not Specified By Manufacturer Distortion Not Specified By Manufacturer Power Requirements 7.4V DC (battery), 9V DC (AC Adapter)  Supplied from BP-900 battery or AD-0910 AC adapter Power Consumption 270 mA Dimensions 8.26 x 2.59 x 5.98" (210 x 65.9 x 152mm) (WxHxD) Weight 1.38 lb (630 g)

Description: Details iShopping.pk brings you the best price for Shure 4-Port Networked Charging Station (MXWNCS4) with express shipping all over Pakistan.   The  MXWNCS4 4-Port Networked Charging Station  from Shure is designed to provide networked charging for up to 4 Microflex wireless transmitter units. Thanks to its networking abilities, the MXWNCS4 can display charge time info to networked computers in addition to being able to assign channels to docked transmitters.   Features: • Station accepts all Microflex Wireless transmitters • Charge status indicators: 5-segment LEDs on the unit display charge status individually for every docked microphone • Remote charge status monitoring: Ethernet connection to the system enables remote monitoring of battery charge status in hours and minutes via the control software or third party control systems • Transmitter linking: Assign docked wireless microphones to channels on an Access Point Transceiver by simply pressing "link" • Rapid charge times: Reaches 50% charge in one hour and fully charges transmitters in two hours • Overcharge protection: Smart recharging circuitry safeguards against battery damage and extends life cycles   Specifications: Charge Time MXW1, MXW6, MXW8: 50% = 1 hour, 100% = 2 hours  MXW2: 50% = 1.5 hours, 100% = 3 hours Network Interface 10/100 Mbps Ethernet Power Requirement 15 V DC @ 3.3 A maximum, supplied by external power supply (tip positive) Housing Molded plastic, cast zinc Dimensions (HxWxD) 2.7 x 7.5 x 7.25" (68 x 191 x 184 mm) Weight 3.7 lb (1.7 kg)

Description: Details iShopping.pk brings you the best price for Toa Electronics Remote Delegate Station (TS-775) with express shipping all over Pakistan.   The Toa TS-775 Remote Delegate Station is intended for use with the TS-770 Conference System Control station and enables remote delegate station operation via phone or PC. The TS-775 enables remote participation of conferences and features manual push-to-talk, and automatic (talk during silence) modes. An RJ45 telephone jack connects to the handset cable of a telephone and 1/8" mini connectors interface with microphone and headphone terminals on a PC.   Features: • Remote conference participation via telephone and PC •  Manual and Automatic talk modes   Specifications: Power Source 35VDC, under 30mA (supplied from TS-770 Central Unit) Input -50dB, 200 ohms balanced, mini jack, equipped with a volume control Output -40dB, 22 ohms balanced, mini jack, equipped with a volume control Operating Temperature 0° to 40° C (32° to 104° F) Finish Pre-coated steel plate, black Dimensions (WxHxD) 6.3 x 1.65 x 3.94" (160 x 41.8 x 100mm) Weight 1.54 lb (700g)

DESCRIPTION Controller Charging Station For PlayStation DualShock 4 Dual USB Charger Ports Item Name: Charging Station Material: Plastic Output: 5V 400mA Product Size: approx. 13.5x4.5x4.5cm/5.31x1.77x1.77'' Color: Black Quantity: 1 Set Product Description: Power through the USB port from either the PS4 or PC. Two controllers can be charged simultaneously. You can leave your controller on the charger after it has finished charging. You don't have to take it off because it won't cause damage to your controller. Keep your controller controllers while not using-which will makes your desk look organised and much tidy. Playing different games and sometimes for more than a few hours, you would forget to connect the USB for your controllers to charge. Now the Controller Charging Station will end this awkward thing. Charging Station only,other accessories demo in the picture is not included! Mention that you found this ad on DealMarkaz.pk when you call.

Short Description: Item Name: Charging Station Material: Plastic Output: 5V 400mA Product Size: approx. 13.5×4.5×4.5cm/5.31×1.77×1.77” Color: Black Quantity: 1 Set Product Description: Power through the USB port from either the PS4 or PC. Two controllers can be charged simultaneously. You can leave your controller on the charger after it has finished charging. You don’t have to take it off because it won’t cause damage to your controller. Keep your controller controllers while not using-which will makes your desk look organized and much tidy. Playing different games and sometimes for more than a few hours, you would forget to connect the USB for your controllers to charge. Now the Controller Charging Station will end this awkward thing. Charging Station only, other accessories demo in the picture are not included! What’s in the box: 1 x Charging Station 1 x USB Cable Weight: 0.4 SKU: 220527101251

CT-859ND AMERICAN CT Work Voltage 220 ( 110 ) V AC 50/60Hz Power (Heater) 80W(Max.)/35V AC Power (Pump) 45W/220(110) V AC Temp Range 240V-450t Temp Fluctuation 680mm Hg(While Leaving Factory) Size(mm) 176(W) x 130(H) x 195(D) Weight 4.4KG Desoldering Station Constant Temp Now Buy Online Shipping All Across Pakistan COMPANY: MATRIX ELECTRONICS CONTACT PERSON: FAIZAN MUNIR Mobile:03002785860 www.matrixelectronic.com Email : sales@matrixelectronic.com Email : info@matrixelectronic.com

5GHz 802.11a/n hi-power (27dBm) 2x2 MIMO AirMax TDMA PoE station. This is the ultimate 5Ghz wireless outdoor CPE with integrated 14dBi dual polarity antenna. Product Includes: - One (1) Nanostation 5.8GHz - One (1) Power Injector: 110-240VAC 24VDC 0.5A US-style plug. - Mount and mounting strap (NanoBracket sold seperately) Featuring a compact indoor/outdoor design and an interface, it is so intuitive even the most technically challenged can instantly become experts. But don't be fooled--it is as powerful as it is simple. NanoStation packs some phenomenal performance with a revolutionary design combining a high gain antenna system, advanced radio architecture and highly researched and developed firmware technology allowing throughput, stability and capacity performance rivaling even the highest-end WiMax networks http://dreamsnw.com/nanostation-m5 Avalaible at Dreams Network & Technology (Pvt) Ltd. Contact: LHR: 04235784892 KHI: 02134710763, 02134711677, 02134721416

NanoStation NSM2: 2GHz 802.11g/n hi-power (27dBm) 2x2 MIMO airMAX TDMA PoE station. This is the ultimate 2Ghz wireless outdoor CPE with integrated 14dBi dual polarity antenna. Key Features - Great Performance: 150+ Mbps real outdoor throughput and up to 15km+ range. Typical range is 2-4 miles from a LOS tower running airMAX sector antenna's and Rocket M2's. - Next-Gen Antenna Design: 11dBi dual-polarity gain with optimized cross-polarity isolation in a compact form-factor. - Dual Ethernet Connectivity: A secondary Ethernet port with software enabled POE output for seamless IP Video integration. - Intelligent POE: Remote hardware reset circuitry of NanoStation M allows for device to be reset remotely from power supply location. - 802.3af 48V Compliant - Easily becomes 802.3af 48V compliant through use of Ubiquiti Instant 802.3af adapter. http://dreamsnw.com/nanostation-m2 Avalaible at Dreams Network & Technology (Pvt) Ltd. Contact: LHR: 04235784892 KHI: 02134710763, 02134711677, 02134721416

Description: Details iShopping.pk brings you the best price for Phoenix Audio Power Hub (MT340)  with express shipping all over Pakistan.   The Phoenix Audio Technologies Power Hub MT340 is a small unit which connects to computers through a standard USB cable and a proprietary 48V AC/DC power adapter. The Power Hub MT304 is then connected to a master Smart Spider unit via any standard CAT5 cable. Both data and power are routed to the Smart Spider through the CAT5 cable, allowing you to station the PC up to 100' from the designated master Smart Spider. The Power Hub also supports power daisy chaining of multiple MT503 units. Please note, this device also works with Quattro3 devices, so if you're looking for a CAT5 extender for your existing Quattro3, the Power Hub MT340 will do the trick.   Features: • For Use with MT503 Smart Spider   • Connects to Computer USB   • Connects to Smart Spider via CAT5 Cable   • Supports Power Daisy Chaining of MT503s   • Allows 100' Between PC & Smart Spider   • Continues to Work with Quattro3  

Description: Details iShopping.pk brings you the best price for Toa Electronics VoIP Paging Module Power Supply with express shipping all over Pakistan.   The SP-11N is a VoIP phone paging module supported SIP (Session Initiation Protocol) with Auto-answer function. It can be connected with IP network and directly registered as one SIP phone station on various management software of SIP server. It also has VOX and mute functions designed for use with TOA's 9000M2, 900, 700 and BG series amplifiers.   Specifications: General Product Type VoIP phone paging module Intended For Audio mixer Product Material Aluminum Width 1.4 in Depth 3.6 in Height 3.1 in Weight 3.03 oz Connections Connections LAN - RJ-45 Control output - 6 pin terminal block

5GHz 300Mbps Outdoor Wireless Base StationWBS510 Broad operating frequency channels ensure less wireless interference Wireless N speed up to 300Mbps Selectable bandwidth of 5/10/20/40MHz Adjustable transmission power from 1 to 27dBm/500mW 2 RP-SMA connectors for external MIMO antenna Work with TP-LINK dish antenna for long-distance wireless data transfer up to 50+Km 1 10/100/1000Mbps Ethernet port for passive PoE and 1 10/100Mbps Ethernet port for extended applications TP-LINK Pharos MAXtream (Time-Division-Multiple-Access) technology improves product throughput, capacity and latency performance, ideal for PtMP applications Centralized Management System – Pharos Control Supports AP Router, AP Client Router, AP, AP Client, Multi-Bridge and Repeater Operation modes Weatherproof enclosure, 15kV ESD and 6KV lightning protection  

Power supply: 110-250Vac 50-60Hz Panel size (H x W x D): 180 x 100 x 22 mm Inside station display: 7″

Description: Details iShopping.pk brings you the best price for Tenda O6 Wireless 5GHz 11AC N433 Outdoor Point To Point CPE with express shipping all over Pakistan.   O6 5GHz 433Mbps outdoor Point to Point CPE is designed to WISP CPE solutions and long distance wireless network solutions for video surveillance and data transmission. It features with an external power amplifier and a built-in 16dBi directional antenna to provide an efficient way to pick up and maintains a stable signal for a wireless network connection range up to 10 kilometers. 5GHz 11AC 433Mbps O6 adopts of 11AC technology and gigabit ethernet port to boost the throughput performance on the wireless connection. 10km+ Wireless Data Transmission O6 is specially designed for outdoor long range point to point application scenarios. Adopt of external power amplifier and 16dBi antenna to achieve 10km+ wireless data transmission range. Bridge two device at a push of button O6 comes with an operating mode switch, you can switch the device to work as AP mode or Station mode without login to web UI. When one works as AP mode and another works as Station(Client) mode, you can bridge two devices together at a push of Bridge/RST button. Smart Signal Indicator LED 3 signal LED Lights represent the currently signal strength that O6 receives from peer device.It is helpful to find the right location to deploy the device and achieve a better performance. Advanced Antenna System O6 adopts of specific antenna array and metal reflector to deliver higher gain and optimized transmission quality. Professional Outdoor Design Equipped with IP64 waterproof enclouse and 6kv lightning protection capability, O6 can work in various weather conditions, such as sunshine, rainfall, wind, snow or extremely low/high temperature environment Multiple Application Scenarios Long-Distance Wireless Connection One work as AP mode and another work as Station mode to create a long distance wrieless connecton for video surveillance and data transmission. WISP(Client+Router) Mode Wirelessly connect to WISP station/hotspot to share Internet to local wireless and wired network. Easy to Manage O6 also comes with a centralized management software that helps users easily manage all the devices in their network from a single computer-- CPE Assistant. Specifications:   Dimension                                                                                          270*94.86*67.5mm                                                                              Frequency Range 5GHz Maximum wireless speed 433Mbps CPU Processor Broadcom 800MHz GND Terminal 1 Interface 1*GE PoE/WAN/LAN port Mode Switch Station: The device only work in Station mode Off: The device work on AP/Station/Universal Repeater/WISP/Router mode AP: The device only work in AP mode Button Reset: Press 10 seconds or more to restore to default settings Bridge: Press 3 seconds and release it to bridge uplink AP Antenna 16dbi Directional Antenna Antenna Beamwidth Horizontal: 30° Vertical: 15° Maximum Consumption 9W Lightning Protection 6KV Waterproof Level IP64 LED LAN,LED1,LED2,LED3 Power Supply 24v 0.5A PoE Injector Operating mode AP/Station/Universal Repeater/WISP/Router Standard&Protocol IEEE 802.11ac/n/a Wireless Speed Enable/Disable Wireless Radio SSID Hidden Wireless Client isolation Sensitivity Threshold WMM Capable APSD Capable Wireless Access Control Wireless Client list Wireless Security 64/128 WEP,WPA-PSK,WPA2-PSK,WPA&WPA2-PSK,WPA,WPA2 Transmit Power Adjustable power by 1dBm Reception Sensitivity MCS0: -90dbm MCS7: -72dbm DHCP Server DHCP Server Clients list VPN Pass-through PPTP,L2TP Ping Watchdog Support Speed Test Support Remote Web access Support Schedule Reboot Support Page Timeout Support Dyndns noip, dyndns.org Network Diagnoses Ping, Traceroute, Signal Scan Management Tool Time&Date Setting System Log Firmware update Backup/Restore Configuration Username Managerment Temperature Operating Temperature:-20℃ ~ 55℃ Storage Temperature:-40℃ ~ 70℃ Humidity Operating Humidity:10%~90% non-condensing Storage Humidity:10%~90% non-condensing Default Settings IP Address: 192.168.2.1 Login Username:admin Login Password:admin Certification FCC/CE/RoHS

Description: Details iShopping.pk brings you the best price for Tenda O6 Wireless 5GHz 11AC N433 Outdoor Point To Point CPE with express shipping all over Pakistan.   O3 2.4GHz Outdoor CPE is designed to WISP CPE solutions and long distance wireless network solutions for video surveillance and data transmission. It features with 12dBi directional antenna to provide an efficient way to pick up and maintain a stable signal for a wireless network. Adopt of auto-bridging technology,two CPE can connect to each other automatically to make it easy to setup. What it does O3 2.4GHz Outdoor CPE is designed to WISP CPE solutions and long distance wireless network solutions for video surveillance and data transmission. It features with 12dBi directional antenna to provide an efficient way to pick up and maintain a stable signal for a wireless network. Adopt of auto-bridging technology,two CPE can connect to each other automatically to make it easy to setup. 5km+ transmission Range O3 adopts of independent power amplifier and 12dBi directional antenna to provide an efficient way to pick up and maintain a stable signal for a wireless network up to 5km. Auto-bridge For Two Device O3 adopts of auto-bridge technology,two cpe can connect to each other when you power on them face to face. It is very easy to setup for CCTV surveillance and data. Smart Signal Indicator LED 3 signal LED Lights represent the currently signal strength that O3 receives from peer device.It is helpful to find the right location to deploy the device and achieve a better performance. Professional Outdoor Design Equipped with IP64 waterproof enclouse and high quality hardware design, O3 can work in various weather conditions, such as sunshine, rainfall or extremely low/high temperature environment Multiple Application Scenarios Long-Distance Wireless Connection One work as AP mode and another work as Station mode to create a long distance wrieless connecton for video surveillance and data transmission. WISP(Client+Router) Mode Wirelessly connect to WISP station/hotspot to share Internet to local wireless and wired network. P2MP Link Link multi AP in a network, all the associated client can communicate with each other. Easy to Setup and Manage O3 comes with a centralized management software that helps users easily to manage all the devices in the network from a single PC-CPE Assistant.   Specifications: Mode                                                                                                 O3 Dimension 270*94.86*67.5mm Deployment Pole Mount Application Scenarios WISP CPE, Data transmission and Long range video surveillance Frequency 2.4GHz Maximum wireless speed 150Mbps Interface 2*10/100Mbps Ethernet Port Antenna 12dbi Antenna Beamwidth Horizontal: 60° Elevation: 30° Reset Button 1 GND Terminal 1 Power Consumption 4.3W Waterproof Level IP64 LED indicator PoE/LAN,LED1,LED2,LED3 Power Method 12V1A Passive PoE Lightning Protection 6000V Passive PoE power supply Passive power over ethenet via PoE/LAN (4,5pins -7,8pins) Voltage range: 11-13.8V DC Reception Sensitivity MCS0: -96dbm MCS7: -72dbm Operating mode AP/Station/WISP/P2MP/WDS Repeater/Router Standard&Protocol IEEE 802.11b/g/n Enable/Disable Wireless Radio Support SSID Hidden Support Wireless Client isolation Support SSID Isolation Support Client Limitation For SSID Support Wireless Access Control Support Weak Signal Client Limitation Support Transmit Power Adjustable power by 1dBm WMM Capable Support APSD Capable Support Wireless Security 64/128 WEP,WPA-PSK,WPA2-PSK,WPA&WPA2-PSK,WPA,WPA2 Transmission Media Support VLAN Tagging for SSID Support DHCP Server Support VPN Pass-through PPTP,L2TP Remote Web access Support Schedule Reboot Support Page Timeout Support Ping Watchdog Support Dyndns noip, dyndns.org Network Diagnoses Ping, Traceroute, Signal Scan Time&Date Setting Support Firmware Upgrade Support Backup/Restore Configuration Support Username Managerment Support Syslog Support Managed By Controller PC Software -- CPE Assistant Package Content 1*5km Point to Point Outdoor CPE 1*Power Adapter 1*PoE Injector 2*Plastic Staps 1*Quick Installation Guide Temperature Operating Temperature:-30℃ ~ 60℃ Storage Temperature:-40℃ ~ 70℃ Humidity Operating Humidity:10%~90% non-condensing Storage Humidity:10%~90% non-condensing Default Settings Default login IP:192.168.2.1 Default Login Username:admin Default Login Password:admin Certification FCC/CE/RoHS

Description: Details iShopping.pk brings you the best price for Revolabs Fusion 4-Channel Telephony Hybrid Revocare with express shipping all over Pakistan.   The Fusion 4-Channel Telephony Hybrid with Wireless Microphone System from Revolabs includes a 4-channel wireless receiver, 3 omnidirectional tabletop mics and 1 lapel mic with rechargeable batteries, a charger base, 2 power cables, and a remote control. It is designed to capture audio for video conferences or conference calls thanks to its built-in hybrid telephone. The system has 128-bit encryption to keep your signals safe and is GSA compliant. The base station receiver can act as an audio mixer by allowing you to adjust the levels of each of its 4 channels. Its built-in acoustic echo cancellation and noise reduction features are designed to provide clear audio for your calls. The 4 microphones have built-in rechargeable batteries that can provide up to 8 hours of talk time on a 2-hour charge in the charger base. They have an approximate 100' range of operation from the base station, allowing for flexibility in placement and movement during your conferences. All of the microphones are RF shielded with Revolabs' RF Armor technology that reduces cell phone interference. revoCARE Extended Service Coverage revoCARE provides you with an added extension and enhancement to the 90 days of complimentary service and support included in the company's limited manufacturer's warranty. revoCARE includes 24-hour advanced replacement on all parts, allowing you to receive replacements before you have sent back the faulty product. revoCARE subscribers also receive Tier 2 service and technical support over the phone with Revolabs' support staff, in addition to free battery replacement on any battery that isn't lasting for at least 7 hours. A host of additional enterprise features are available for Executive HD users including being able to control and monitor your system via Ethernet.   Specifications: Audio Channels 4 Radio Frequency 1920 to 1930 MHz Range of Operation 100' (30 m), Approximately, with No Obstructions  Out-of-Range Alarm Bandwidth 100 Hz to 6.8 kHz Base Station Power 24 V DC, 2.5 A Locking Power Connector 100-240 V, 50/60 Hz Connectors/Interfaces IR Remote Serial DB9 Sensor Audio Control RJ45 (Firmware Updates Only) Telephone Line/Telephone Set-In RJ11 Network RJ45 (Firmware Updates Only) Mic Level XLR Male Conference Out Auxiliary In/Out Line Level RCA Plug Record Out/Room Out Line Level RCA Plug Conference In/Out Line Level RCA Plug Charging Cradle Power 5 V DC, 2 A 100-240 V, 50-60 Hz Connectors 4 Proprietary 4-Pin Microphone Charge Jacks Microphone Battery Lithium Polymer Talk Time Up to 8 Hours Charge Time 2 Hours Encryption 128-Bit Proprietary (Per Mic Channel) RF Shield Yes, RF Armor Mute Mute Button for Muting and Pairing LED Indicator Mute Status, Pairing, Battery Charge Charging Proprietary 4-Pin

Description: Details iShopping.pk brings you the best price for Revolabs Fusion 4-Channel Telephony Hybrid Dialer with express shipping all over Pakistan.   The Fusion 4-Channel Telephony Hybrid with Wireless Microphone System and Tabletop Dialer from Revolabs includes a 4-channel wireless receiver, 3 omnidirectional tabletop mics and 1 lapel mic with rechargeable batteries, a tabletop dialer, a charger base, 2 power cables, and a remote control. It is designed to capture audio for video conferences or conference calls thanks to its built-in hybrid telephone and dialer. The system has 128-bit encryption to keep your signals safe and is GSA compliant. The base station receiver can act as an audio mixer by allowing you to adjust the levels of each of its 4 channels. Its built-in acoustic echo cancellation and noise reduction features are designed to provide clear audio for your calls. The 4 microphones have built-in rechargeable batteries that can provide up to 8 hours of talk time on a 2-hour charge in the charger base. They have an approximate 100' range of operation from the base station, allowing for flexibility in placement and movement during your conferences. All of the microphones are RF shielded with Revolabs' RF Armor technology that reduces cell phone interference.   Specifications: Audio Channels 4 Radio Frequency 1920 to 1930 MHz Range of Operation 100' (30 m), Approximately, with No Obstructions  Out-of-Range Alarm Bandwidth 100 Hz to 6.8 kHz Base Station Power 24 V DC, 2.5 A Locking Power Connector 100-240 V, 50/60 Hz Connectors/Interfaces IR Remote Serial DB9 Sensor Audio Control RJ45 (Firmware Updates Only) Telephone Line/Telephone Set-In RJ11 Network RJ45 (Firmware Updates Only) Mic Level XLR Male Conference Out Auxiliary In/Out Line Level RCA Plug Record Out/Room Out Line Level RCA Plug Conference In/Out Line Level RCA Plug Charging Cradle Power 5 V DC, 2 A 100-240 V, 50-60 Hz Connectors 4 Proprietary 4-Pin Microphone Charge Jacks Microphone Battery Lithium Polymer Talk Time Up to 8 Hours Charge Time 2 Hours Encryption 128-Bit Proprietary (Per Mic Channel) RF Shield Yes, RF Armor Mute Mute Button for Muting and Pairing LED Indicator Mute Status, Pairing, Battery Charge Charging Proprietary 4-Pin

Description: Details iShopping.pk brings you the best price for Revolabs Fusion 4-Channel Telephony Hybrid Wireless System with express shipping all over Pakistan.   The Fusion 4-Channel Telephony Hybrid with Wireless Microphone System from Revolabs includes a 4-channel wireless receiver, 3 omnidirectional tabletop mics and 1 lapel mic with rechargeable batteries, a charger base, 2 power cables, and a remote control. It is designed to capture audio for video conferences or conference calls thanks to its built-in hybrid telephone. The system has 128-bit encryption to keep your signals safe and is GSA compliant. The base station receiver can act as an audio mixer by allowing you to adjust the levels of each of its 4 channels. Its built-in acoustic echo cancellation and noise reduction features are designed to provide clear audio for your calls. The 4 microphones have built-in rechargeable batteries that can provide up to 8 hours of talk time on a 2-hour charge in the charger base. They have an approximate 100' range of operation from the base station, allowing for flexibility in placement and movement during your conferences. All of the microphones are RF shielded with Revolabs' RF Armor technology that reduces cell phone interference.   Specifications: Audio Channels 4 Radio Frequency 1920 to 1930 MHz Range of Operation 100' (30 m), Approximately, with No Obstructions  Out-of-Range Alarm Bandwidth 100 Hz to 6.8 kHz Base Station Power 24 V DC, 2.5 A Locking Power Connector 100-240 V, 50/60 Hz Connectors/Interfaces IR Remote Serial DB9 Sensor Audio Control RJ45 (Firmware Updates Only) Telephone Line/Telephone Set-In RJ11 Network RJ45 (Firmware Updates Only) Mic Level XLR Male Conference Out Auxiliary In/Out Line Level RCA Plug Record Out/Room Out Line Level RCA Plug Conference In/Out Line Level RCA Plug Charging Cradle Power 5 V DC, 2 A 100-240 V, 50-60 Hz Connectors 4 Proprietary 4-Pin Microphone Charge Jacks Microphone Battery Lithium Polymer Talk Time Up to 8 Hours Charge Time 2 Hours Encryption 128-Bit Proprietary (Per Mic Channel) RF Shield Yes, RF Armor Mute Mute Button for Muting and Pairing LED Indicator Mute Status, Pairing, Battery Charge Charging Proprietary 4-Pin

Description: Details iShopping.pk brings you the best price for Revolabs Fusion 4-Channel Telephony Hybrid Microphone with express shipping all over Pakistan.   The Fusion 4-Channel Telephony Hybrid with Wireless Microphone System and Tabletop Dialer from Revolabs includes a 4-channel wireless receiver, 3 omnidirectional tabletop mics and 1 lapel mic with rechargeable batteries, a tabletop dialer, a charger base, 2 power cables, and a remote control. It is designed to capture audio for video conferences or conference calls thanks to its built-in hybrid telephone and dialer. The system has 128-bit encryption to keep your signals safe and is GSA compliant. The base station receiver can act as an audio mixer by allowing you to adjust the levels of each of its 4 channels. Its built-in acoustic echo cancellation and noise reduction features are designed to provide clear audio for your calls. The 4 microphones have built-in rechargeable batteries that can provide up to 8 hours of talk time on a 2-hour charge in the charger base. They have an approximate 100' range of operation from the base station, allowing for flexibility in placement and movement during your conferences. All of the microphones are RF shielded with Revolabs' RF Armor technology that reduces cell phone interference.   Specifications: Audio Channels 4 Radio Frequency 1920 to 1930 MHz Range of Operation 100' (30 m), Approximately, with No Obstructions  Out-of-Range Alarm Bandwidth 100 Hz to 6.8 kHz Base Station Power 24 V DC, 2.5 A Locking Power Connector 100-240 V, 50/60 Hz Connectors/Interfaces IR Remote Serial DB9 Sensor Audio Control RJ45 (Firmware Updates Only) Telephone Line/Telephone Set-In RJ11 Network RJ45 (Firmware Updates Only) Mic Level XLR Male Conference Out Auxiliary In/Out Line Level RCA Plug Record Out/Room Out Line Level RCA Plug Conference In/Out Line Level RCA Plug Charging Cradle Power 5 V DC, 2 A 100-240 V, 50-60 Hz Connectors 4 Proprietary 4-Pin Microphone Charge Jacks Microphone Battery Lithium Polymer Talk Time Up to 8 Hours Charge Time 2 Hours Encryption 128-Bit Proprietary (Per Mic Channel) RF Shield Yes, RF Armor Mute Mute Button for Muting and Pairing LED Indicator Mute Status, Pairing, Battery Charge Charging Proprietary 4-Pin

Nanostation M5 5GHz 802.11a/n hi-power (27dBm) 2x2 MIMO airMAX TDMA PoE station. This is the ultimate 5Ghz wireless outdoor CPE with integrated 14dBi dual polarity antenna. Product Includes: • One (1) Nanostation M5 5.8GHz • One (1) Power Injector: 110-240VAC 24VDC 0.5A US-style plug.  • Mount and mounting strap (NanoBracket sold separately) Featuring a compact indoor/outdoor design and an interface, it is so intuitive even the most technically challenged can instantly become experts. But don't be fooled--it is as powerful as it is simple. NanoStation packs some phenomenal performance with a revolutionary design combining a high gain antenna system, advanced radio architecture and highly researched and developed firmware technology allowing throughput, stability and capacity performance rivaling even the highest-end WiMax networks The NanoStation M5 makes a perfect CPE device when pared with the Ubiquiti Rocket M5 and AirMax Sector or a Dish Antenna. We also recommend to upgrade your AirOS software to the latest version by visiting UBNT Software Downloads. This device can also be used for short LOS PtP links by placing one unit in Access Point WDS Mode and the other unit into Station WDS. NanoStation M5 Features: • Great Performance: 150+ Mbps real outdoor throughput and up to 15km+ range. Typical range is 2-4 miles from a LOS tower running airMAX sector antenna's and Rocket M5's.  • Next-Gen Antenna Design: 11dBi dual-polarity gain at 5GHz with optimized cross-polarity isolation in a compact form-factor. • Dual Ethernet Connectivity: A secondary Ethernet port with software enabled POE output for seamless IP Video integration. • Intelligent POE: Remote hardware reset circuitry of NanoStation M allows for device to be reset remotely from power supply location.  • 802.3af 48V Compliant - Easily becomes 802.3af 48V compliant through use of Ubiquiti Instant 802.3af adapter. The adapter sold separately (SKU#I8023AF-OD or I8023AF-ID)  • Easy Installation - Easily mountable to a pole/mast with mounting straps provided. In addition, the NanoStation M5 can be mounted and adjusted in any direction in a 90-degree angle through the use the NanoBracket. The NanoBracket is sold separately (SKU#MT-NANO U) NanoStation M5 Specifications: • Operating Frequency: 5170 - 5875 Mhz. NOTE: Only 5745-5825 Mhz is supported in the USA and Canada. It is the operator's responsibility to follow local country regulations including operation within legal frequency channels, output power, and Dynamic Frequency Selection (DFS) requirements. • Processor Specs: Atheros MIPS 24KC, 400MHz • Wireless: 5Ghz Atheros, 27dBm Adjustable down to 8dBm, AES Encryption • Memory Information: 32MB SDRAM, 8MB Flash • Networking Interface: 2 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface, PoE Passthrough • Mount and mounting strap (Nanobracket is optional, sold separately) • Operating Temperature: -30C to +80C • Power Method: Passive PoE • Power Consumption: 8 Watts • Power Supply (included): Power Injector 110-240VAC 24VDC.5A North American-style plug • Size: 29.4 cm x 8 cm x 3cm, Weight:.4kg • Approvals: FCC Part 15.247, IC RS210, CE • RoHS Compliance: YES Technical Information and Support: Nanostation M5 Data Sheet Nanostation Quick Start Guide AirMax CPE Quick Start Guide

DESCRIPTION MW529 Refurbished 3300lms WXGA Meeting Room Projector All Specifications Display Brightness (ANSI lumens) 3300 Native Resolution WXGA (1280x800) Native Aspect Ratio 16:10 Contrast Ratio (FOFO) 13000:1 Display Color 30 Bits (1,07 billion colors) Light Source Lamp Light Source Life Economic 6000 hrs, LampSave 10000 hrs, Normal 4500 hrs, SmartEco 6500 hrs Optical Throw Ratio 1.55-1.7 Zoom Ratio 1.1x Lens F=2.56-2.68 f=22-24.1 Projection Offset (Full-Height) 100% Keystone Adjustment 1D, Vertical ± 40 degrees Picture Picture Modes 3D, Cinema, Dynamic, Presentation, sRGB, User 1, User 2 I/O Interface PC in (D-sub 15pin) 2 Monitor out (D-sub 15pin) 1 Composite Video in (RCA) 1 S-Video in (Mini DIN 4pin) 1 HDMI in 1 USB Type Mini B 1 RS232 in (DB-9pin) 1 Audio Audio in (3.5mm Mini Jack) 1 Audio out (3.5mm Mini Jack) 1 Environment Operating Temperature 0~40℃ Power Supply AC 100 to 240 V, 50/60 Hz Typical Power Consumption (110V) 270W Stand-by Power Consumption b' Acoustic Noise (Typ./Eco.)(dB) 33/28 dBA Accessories Remote Control w/ Battery RCX022 Power Cord (by region) 1 (1.8M) VGA(D-sub 15pin) Cable 1 (1.5m) User Manual CD 1 (25L) 3D Glasses (Optional), Yes, DGD5 Quick Start Guide 1 (18L) Installation Guide Yes Warranty Card (by region) Yes Universal Ceiling Mount Yes, CMG3 Projection System Projection System DLP 6th Road Metro Station Taj Mahal Plaza Shop No 14B, 6th Road Metro Station Taj Mahal Plaza, Rawalpindi, Punjab, Pakistan

Description: Details iShopping.pk brings you the best price for Toa Electronics Central Control Mixer Unit (TS-770) with express shipping all over Pakistan.   The Toa TS-770 Central Control Unit is designed for use with the Toa TS-770 conference system. The TS-770 is the control unit for the TS-771 chairman station, TS-772 delegate station and TS-775 remote delegate interface. Up to 70 stations can be connected to one TS-770, and up to three TS-770 units can be chained for control of up to 210 stations. The compact, intuitive TS-770 provides a host of features that include microphone-off position switches that automatically switch off microphones after 20 or 40 seconds of silence. Three limiter settings adjust the level threshold and avoid distortion caused by loud talkers. The front panel features level control for microphone and line level signal and two jacks provide connections for an auxiliary microphone and line level device.   Features: Control of Up to 70 Stations Up to 70 stations can be connected to one TS-770, and up to three TS-770 units can be chained for control of up to 210 stations. Automatic Microphone-Off Function The compact, intuitive TS-770 provides a host of features that include microphone-off position switches that automatically switch off microphones after 20 or 40 seconds of silence. Three Position Limiter Three limiter settings adjust the level threshold and avoid distortion caused by loud talkers. Auxiliary Inputs The front panel features level control for microphone and line level signal and two jacks provide connections for an auxiliary microphone and line level device.   Specifications: Inputs Line - 8-pin Connector x2  EXT 1 / EXT 2 - RCA Phono x2 Equalizer In - 1/4" Phone  Aux Mic - 1/4" Phone Aux Line - 1/4" Phone Outputs EXT 1 / EXT 2 - RCA Phono x2  Rec Out - Stereo 1/4" Phone & 1/8" Mini Multi-Pin I/O Connectors No Frequency Response Not Specified By Manufacturer Signal-to-Noise Ratio Not Specified By Manufacturer Distortion Not Specified By Manufacturer Power Requirements AC Mains, 50/60Hz Power Consumption 60W Dimensions (WxHxD) 8.27 x 4.22 x 12.44" (210 x 107.1 x 316mm) Weight 8.82 lb (4 kg)

Description: Details Razer Basilisk Ultimate  Gaming Mouse  Delivered All Over Pakistan iShopping.pk brings you the best price for Razer Basilisk Ultimate Wireless Gaming Mouse with express shipping all over Pakistan.   Details: CUSTOMIZABILITY UNLEASHED With the Razer Basilisk Ultimate, victory has never been this personal. As a high-performance wireless gaming mouse that can be tuned to look, play and feel exactly the way you want, the only people running out of options will be your opponents. RAZER HYPERSPEED WIRELESS 25% faster than any other wireless technology available, you won’t even realize that you’re gaming with a wireless mouse due to its high-speed transmission, lowest click latency, and seamless frequency switching in the noisiest, data-saturated environments. 11 PROGRAMMABLE BUTTONS Have a greater arsenal of commands at your fingertips by mapping your favorite macros and secondary functions via Razer Synapse 3. Like its wired variant, the Razer Basilisk Ultimate includes the signature multi-function paddle. 14 CUSTOMIZABLE RAZER CHROMA™ LIGHTING ZONES Each lighting zone on this wireless mouse can be individually programmed in Chroma Studio, making it a standout addition to your battle station as you light up your opponents. CUSTOMIZABLE SCROLL WHEEL RESISTANCE The Razer Basilisk Ultimate comes with a dial on its underside that lets you tweak the resistance of its scroll wheel to be as smooth or as tactile as you want. With this level of personalization, you’ll be able to more accurately perform bunny hops, weapon selects, and other scroll wheel actions. UP TO 100 HOURS OF BATTERY LIFE Improved wireless power efficiency keeps it running at peak performance for up to 100 continuous hours. 5 ON-BOARD MEMORY PROFILES Bring your settings anywhere and be match-ready in no time. Activate up to 5 profile configurations from its on-board memory or custom settings via cloud storage. RAZER MOUSE DOCK CHROMA Add more character to your battle station with an efficient charging dock that can seamlessly integrate with other Razer Chroma-enabled devices. 100% PTFE MOUSE FEET Enjoy slick mouse movement across any surface with mouse feet made from the purest, highest grade of PTFE—a material used to coat non-stick pans.

D-Link DWL-6610AP Wireless AC1200 Dual‑Band Unified Access Point Product Status The DWL-6610AP is an affordable, Unified Wireless AC1200 Access Point, enabling businesses of all sizes create the fastest wireless network possible.  With a sleek and stylish design, the DWL-6610AP can be discreetly deployed anywhere. Performance without Compromise       The DWL-6610AP is an affordable, Unified Wireless AC1200 Access Point, enabling businesses of all sizes create the fastest wireless network possible. With a sleek and stylish design, the DWL-6610AP can be discreetly deployed anywhere. Key Features Wireless AC 1200 Maximum combined wireless speed of 1200 Mbps.* Broadcast on 32 SSIDs Simultaneously Supports up to 32 SSIDs, 16 per radio, including station isolation. Dual Band Supports both 2.4Ghz and 5Ghz bands simultaneously. Unified Wireless Access points can be managed by unified wireless controller. Smart Design The DWL-6610AP can be mounted easily onto any wall or ceiling without looking out of place in an office or home. Enclosed in a plenum-rated UL2043 certified housing, the DWL-6610AP adheres to strict fire codes for placement in air passageways. Band Steering technology With band steering, the DWL-6610AP detects whether or not the wireless client is dual-band capable, and if so, it pushes the client to connect to the less congested 5 Ghz band. It does this by actively blocking the client’s attempts to associate with the 2.4 Ghz network. Versatility Built as standard Whether you intend to use a single Access Point or roll out a large corporate network, the DWL-6610AP coupled with a D-Link Wireless Controller or Unified Switch makes managing your wireless network simple. Secure and Green Design The DWL-6610AP has a wireless scheduler feature, which turns off wireless functionality when it isn’t needed, saving power and increasing network security.   Fast Seamless Roaming Combining the DWL-6610AP with a Unified Wireless Switch or Controller allows you to create a wireless network that enables people to move freely around a building without losing connectivity.     Management platforms D-Link’s Unified Wireless Access Points can be managed using a D-Link Wireless Controller or Unified Switch.   Simultaneous Dual-Band Supports up to 867 Mbps 2x2 MIMO for the 5Ghz band and up to 300Mbps 2x2 MIMO for the 2.4Ghz band   * Maximum wireless signal rate derived from IEEE standard 802.11ac specifications which are subject to change. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors may adversely affect wireless signal range. Specs Type Hardware-managed AP Wireless standard Wireless AC Frequency band mode Dual-band simultaneous Wireless speed 300 Mbps 2.4 GHz  867 Mbps 5 GHz Antenna type Embedded omni-directional antennas Antenna gain 3.5 dBi for 2.4 GHz  5 dBi for 5 GHz Power-over-Ethernet Yes Wired interface 1 x Gigabit Ethernet LAN Console port   Indoor/outdoor Indoor Type of housing Plastic Plenum rated (UL-2043)   Wireless modes Access Point (AP)  WDS bridge Advanced features MIMO Maximum number of SSIDs 16 per radio Auto channel selection   WMM-PS/802.11e (U-APSD)   Wi-Fi scheduler   AP traffic load balance   L2 roaming   WPA/WPA2-Personal/Enterprise   TKIP/AES encryption   WLAN partition   SSID broadcast disable   Rogue AP detection   Station isolation   MAC address filtering   802.1X authentication   Wireless controller/unified switch managed features AP load balance  Auto-channel, auto-RF management  Captive portal  L2/L3 fast roaming  Rogue AP mitigation  View neighbour AP information  WIDS/WIPS Supported D-Link Wireless Controllers/Unified Switches DWC-1000  DWC-2000  DWS-4026 Management platform Hardware controller: DWC/DWS Series WEB   SNMP (v1, v2c, v3)   Telnet   SSH   Configuration group sync through AP Array (up to 8 APs)  

Description: Details iShopping.pk brings you the best price for Bosch CCS-CU Control Unit For CCS 900 Ultro Conference System with express shipping all over Pakistan.   The Bosch CCS-CU Control Unit is the central power and control station for all CCS 900 Ultro Conference System contributor units, such as the chairman and delegate units. The control unit will supply power for up to 50 delegate / chairman units, and provide control for up to 150. The unit features a built in speaker and automated, programmable control over contributor units without the need for an operator. Its Digital Acoustic Feedback Suppression (DAFS) eliminates feedback howling and maintains clear, intelligible speech. Plenty of connections allow for interfacing within paging systems, amplifier systems, recording devices and more. The unit is feature rich, however its control section is straightforward and intuitive to operate in any conference setting.   Features: Discussion Control Without Operator The CU can be setup to operate standalone without the need for an operator. The following 5 modes can be chosen using a rotary control on the unit's top panel: • Open mode - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active • Open mode with auto-switch-off - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active. If the delegate does not speak for 30 seconds, microphones are automatically switched off • Override mode - delegates can override each other simply by activating their microphones. Only one microphone can be active at any one time. (Note: In override mode, delegates cannot override chairmen) • Chairman only mode - only chairmen can speak. Delegate microphones cannot be activated, even when a chairman is not speaking • Test mode - checks if system connections are correct. All microphone light rings and contribution unit LEDs light up to indicate that units are properly connected Supplies Power for up to 50 Contribution Units The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to connect 25 contribution units to each trunk output, with a maximum system cable length of 109.3 yards (100m). Provides Control for up to 150 Contribution Units Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150 contribution units. In this configuration a single CU acts as a master controller for the entire system. Built-in Monitor Loudspeaker The built-in monitor loudspeaker and headphone socket allow the conference to be monitored. Interfaces the System With External Equipment The following equipment can be interfaced to the CCS Ultro Discussion System through the CU: • External wired or wireless microphone - for guest speakers or audience participation. (Note: The external microphone is muted when the priority button on a chairman unit is pressed, and when the system is operating in 'chairman only' mode) • External PA system - for transmitting the proceedings to an audience in the same room or an adjacent room• Tape recorder - for external recording and playing back meetings and discussions • Audio equipment - for providing background music • Telephone coupler - to allow a remote delegate to participate via telephone• External audio processing - an insertion connector is provided Controls and Indicators (Top) • Mains on/off switch • Graphical display for status information (CCS‐CURD) • 5 soft buttons for configuration and control of thebuilt-in MP3 recorder (CCS‐CURD) • Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This control also determines the maximum level for the headphone outputs of the contribution units and the CU. • Microphone mode rotary switch, for setting the number of simultaneously active microphones, and selecting one of the four operation modes (plus test mode) • Power on LED Controls and Indicators (Back) • On/off switch for digital acoustic feedback suppression facility (CCS‐CUD, CCS‐CURD)• Microphone input gain adjustment • External recorder input gain adjustment• Insertion connector bypass switch   Specifications: Connections Top • 1x 0.14" (3.5mm) stereo headphone socket Back • 1x AC input • 2x 7-pole circular female connectors, trunk in/out loop through interconnection  • 1x 3-pole female XLR connector, microphone input (can be used as line input by included 50dB attenuator) • 1 x Cinch connector pair, line input/output  • 1 x Cinch connector pair, telephone input/output • 1 x Cinch connector pair, insertion input/output  • 2 x Cinch connector pairs (R/L channel), external recorder input/output • USB interface (CCS-CURD) Power Supply Mains voltage: 100 to 240 VAC ± 10% Current consumption: maximum 0.9A (100 VAC) to 0.3 A (240 VAC) DC supply to contribution units: 24V ± 1V (current limited) Volume mute (50dB att.) + 10 steps of 1.9dB Limiter 10dB above nominal level loudspeaker / headphone Gain Gain reduction due to number of open microphones (NOM): ÷ NOM ± 1 dB Total Harmonic Distortion Nominal input (85 dB SPL): Max. input (110 dB SPL): Sample Rate Recording: 32kHz Playback: 32, 44.1, 48kHz Bit Rate Recording: 64, 96, 128, 192, 256 KBit/sec Playback: any bitrate Mount Tabletop (portable or fixed) 19-inch rack flush mounting Material Top: polymer Bottom: painted metal Color Charcoal and Black Dimensions (HxWxD) 3.4 x 14.2 x 5.6" (84 x 361 x 143mm) Height of feet: 0.22" (5.5mm) Weight 3.3 lb (1.5kg)

Description: Details iShopping.pk brings you the best price for Bosch CCS-CUD Control Unit For CCS 900 Ultro Conference System with express shipping all over Pakistan.   The Bosch CCS-CUD Control Unit is the central power and control station for all CCS 900 Ultro Conference System contributor units, such as the chairman and delegate units. The control unit will supply power for up to 50 delegate / chairman units, and provide control for up to 150. The unit features a built in speaker and automated, programmable control over contributor units without the need for an operator. Its Digital Acoustic Feedback Suppression (DAFS) eliminates feedback howling and maintains clear, intelligible speech. Plenty of connections allow for interfacing within paging systems, amplifier systems, recording devices and more. The unit is feature rich, however its control section is straightforward and intuitive to operate in any conference setting.   Features: Digital Acoustic Feedback Suppression The digital acoustic feedback suppression facility automatically eliminates acoustic feedback (also known as 'howling' or 'Larsen effect'). This gives better speech intelligibility by allowing the speaker volume to be turned up as loud as required without any risk of feedback. Discussion Control Without Operator The CU can be setup to operate standalone without the need for an operator. The following 5 modes can be chosen using a rotary control on the unit's top panel: • Open mode - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active • Open mode with auto-switch-off - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active. If the delegate does not speak for 30 seconds, microphones are automatically switched off • Override mode - delegates can override each other simply by activating their microphones. Only one microphone can be active at any one time. (Note: In override mode, delegates cannot override chairmen) • Chairman only mode - only chairmen can speak. Delegate microphones cannot be activated, even when a chairman is not speaking • Test mode - checks if system connections are correct. All microphone light rings and contribution unit LEDs light up to indicate that units are properly connected Supplies Power for up to 50 Contribution Units The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to connect 25 contribution units to each trunk output, with a maximum system cable length of 109.3 yards (100m). Provides Control for up to 150 Contribution Units Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150 contribution units. In this configuration a single CU acts as a master controller for the entire system. Built-in Monitor Loudspeaker The built-in monitor loudspeaker and headphone socket allow the conference to be monitored. Interfaces the System With External Equipment The following equipment can be interfaced to the CCS Ultro Discussion System through the CU: • External wired or wireless microphone - for guest speakers or audience participation. (Note: The external microphone is muted when the priority button on a chairman unit is pressed, and when the system is operating in 'chairman only' mode) • External PA system - for transmitting the proceedings to an audience in the same room or an adjacent room• Tape recorder - for external recording and playing back meetings and discussions • Audio equipment - for providing background music • Telephone coupler - to allow a remote delegate to participate via telephone• External audio processing - an insertion connector is provided Controls and Indicators (Top) • Mains on/off switch • Graphical display for status information (CCS‐CURD) • 5 soft buttons for configuration and control of thebuilt-in MP3 recorder (CCS‐CURD) • Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This control also determines the maximum level for the headphone outputs of the contribution units and the CU. • Microphone mode rotary switch, for setting the number of simultaneously active microphones, and selecting one of the four operation modes (plus test mode) • Power on LED Controls and Indicators (Back) • On/off switch for digital acoustic feedback suppression facility (CCS‐CUD, CCS‐CURD)• Microphone input gain adjustment • External recorder input gain adjustment• Insertion connector bypass switch   Specifications: Connections Top • 1x 0.14" (3.5mm) stereo headphone socket Back • 1x AC input • 2x 7-pole circular female connectors, trunk in/out loop through interconnection  • 1x 3-pole female XLR connector, microphone input (can be used as line input by included 50dB attenuator) • 1 x Cinch connector pair, line input/output  • 1 x Cinch connector pair, telephone input/output • 1 x Cinch connector pair, insertion input/output  • 2 x Cinch connector pairs (R/L channel), external recorder input/output • USB interface (CCS-CURD) Power Supply Mains voltage: 100 to 240 VAC ± 10% Current consumption: maximum 0.9A (100 VAC) to 0.3 A (240 VAC) DC supply to contribution units: 24V ± 1V (current limited) Volume mute (50dB att.) + 10 steps of 1.9dB Limiter 10dB above nominal level loudspeaker / headphone Gain Gain reduction due to number of open microphones (NOM): ÷ NOM ± 1 dB Total Harmonic Distortion Nominal input (85 dB SPL): Max. input (110 dB SPL): Sample Rate Recording: 32kHz Playback: 32, 44.1, 48kHz Bit Rate Recording: 64, 96, 128, 192, 256 KBit/sec Playback: any bitrate Mount Tabletop (portable or fixed) 19-inch rack flush mounting Material Top: polymer Bottom: painted metal Color Charcoal and Black Dimensions (HxWxD) 3.4 x 14.2 x 5.6" (84 x 361 x 143mm) Height of feet: 0.22" (5.5mm) Weight 3.3 lb (1.5kg)