Power knee support protect

Description: Details iShopping.pk brings you the best price for TP-Link 10-Port Gigabit Smart PoE Switch with 1 SFP Slots (TL-SG1210P) with 18 months official warranty and express shipping all over Pakistan.   Features: • 9 10/100/1000Mbps RJ45 ports, 1 Gigabit SFP port •  With 8 PoE+ ports, transfers data and power on one single cable •  Works with IEEE 802.3af/at compliant PDs and expands office network •  802.1p/DSCP QoS enable smooth latency-sensitive traffic •  High PoE power budget with up to 30W for each PoE port and 63W for all PoE ports •  Easy to use, with no configuration and installation needed   Specifications: HARDWARE FEATURES Interface 8 PoE+ 10/100/1000Mbps RJ45 Ports 1 10/100/1000Mbps RJ45 Port 1 Gigabit SFP Slot Network Media 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 100BASE-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 1000BASE-X MMF, SMF Fan Quantity Fanless Physical Security Lock Yes Power Supply External Power Adapter(Output: 53.5VDC / 1.31A) Packet Forwarding Rate 14.88 Mpps PoE+ Ports(RJ45) Standard: 802.3at/802.3af compliant PoE Ports: Port1- Port 8 PoE Power Budget: 63W Mac Address Table 4K Jumbo Frame 16 KB Switching Capacity 20 Gbps Dimensions (W x D x H) 209 × 126 × 26 mm Max Power Consumption 7.11 W (220/50Hz. no PD connected) 78.13 W (220/50Hz. with 63W PD connected) Max Heat Dissipation 24.25 BTU/h (no PD connected) 266.42 BTU/h (with 63W PD connected) SOFTWARE FEATURES Advanced Features Compatible With IEEE 802.3af/at Compliant PDs EEE802.3x Flow Control 802.1p/DSCP QoS IGMP Snooping Transmission Method Store-And-Forward OTHERS Certification CE, FCC, RoHS Package Contents TL-SG1210P, Power Adapter, Installation Guide Environment Operating Temperature: 0°C~40°C (32°F~104°F) Storage Temperature: -40°C~70°C (-40°F~158°F) Operating Humidity: 10% ~ 90% non-condensing Storage Humidity: 5%~90% non-condensing   Power over Ethernet Port 1-8 of the switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af/at compliant Powered Devices (PDs).   Intelligent Power Management When total power consumption excels 63W, the intelligent power management will cut the lower priority port power off to ensure the high priority port’s power supply and protect the device from power overload operation.   Sturdy Metal Casing Sturdy, compact metal casing, with desktop/wall-mounting design, to meet your needs in any environment. Besides, fanless design ensures quiet operation.   Multiple Applications The benefits of PoE switches have become more evident with the rapid expansion of network-connected devices. They offer more effective solutions for connecting numerous PoE-compatible devices like VoIP, IP cameras, and access points—meeting the demands of most common business scenarios.

Description: Details iShopping.pk brings you the best price for TP-Link 16-Port Gigabit Easy Smart PoE Switch with 8-Port PoE+ (TL-SG1016PE) with express shipping all over Pakistan   Features: • 16 10/100/1000Mbps RJ45 ports • Equipped with 8 PoE+ supported ports to transfer data and power over a single cable • With a total PoE power budget of 110W, up to 30W per port • Works with IEEE 802.3af/at compliant devices, expanding home and office networks • Simple network set-up on top of plug-and-play connectivity  • Web-based user interface and management utility simplify configuration    Specification: HARDWARE FEATURES Standards and Protocols IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.1q, IEEE 802.1p Interface 16 10/100/1000Mbps RJ45 Ports AUTO Negotiation/AUTO MDI/MDIX  Network Media 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 100BASE-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m)  Fan Quantity 1 Power Supply 100-240VAC, 50/60Hz Power Consumption Maximum: 124.4W (220V/50Hz) PoE Ports (RJ45) Standard: 802.3 at compliant PoE Ports: Port 1- Port 8 PoE Power Budget: 110W Dimensions (W x D x H) 11.6*7.1*1.7 in. (294*180*44 mm) PERFORMANCE Switching Capacity 32Gbps Packet Forwarding Rate 23.8Mbps MAC Address Table 8K Packet Buffer Memory 4.1Mbit Jumbo Frame 9KB SOFTWARE FEATURES Quality of Service Support Port-Based/802.1p/DSCP priority Support 4 priority queues Rate Limit Storm Control L2 Features IGMP Snooping V1/V2/V3 Link Aggregation Port Mirroring Cable Diagnostics Loop Prevention VLAN Supports up to 128 VLANs simultaneously (out of 4K VLAN IDs) MTU/Port/Tag VLAN Management Web-based GUI Easy Smart Configuration Utility Transmission Method Store-And-Forward OTHERS Certification FCC, CE, RoHS Package Contents TL-SG1016PE Power Cord Installation Guide Resource CD Rackmount Kit Rubber Feet System Requirements Microsoft® Windows® for running Utility Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing   What This Product Does The TL-SG1016PE is an 16-Port Gigabit Desktop/Rack mountable Switch with 8 ports supporting the PoE+ standard. It provides a simple way to expand a wired network by transferring power and data over a single Ethernet Cable. With a total power budget of 110W, up to 30W per port, TL-SG1016PE can power more high-powered devices such as wireless Access Points (APs), IP Cameras or IP Phones. Moreover, with innovative energy-efficient technology, the TL-SG1016PE can save up to 75% of the power consumption, making it an eco-friendly solution for your business network. How This Product Works 8 ports of TL-SG1016PE support Power over Ethernet Plus (PoE+) standard which can automatically detect and supply power to any IEEE 802.3af/at compliant device(s). In this situation, the electrical power is transmitted along with data in a single cable, allowing you to expand your network where there are electrical cables or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones. Overload Arrangement TL-SG1016PE has a priority function which helps protect the system when its power is overloaded. If all PoE+ devices’ power consumption is greater than or equal to 110W, a priority will be arranged among the 16 PoE+ ports, at which point the system will cut off the power of the lowest-priority port.   Port Priority Function *Priority (port 1>port 2>port 3>port 4> port 5>port 6>port 7>port 8): This function will help protect the system if the system power becomes overloaded. For example, Port 1, 2, 3, 4, and 5 are using 30w (maximum power per port is 30W), the system power is 110w in total (PoE max LED will be green if all PoE PDs power consumption is >= 110W). If there is an additional PD inserted to Port 4 with 20w then the system will cut off Port 5 to protect the system, this means Port 1, 2,3, will use 90w, and Port 4 will use 20w, and no power will be supplied to Port 5. Easy To Use TL-SG1016PE is easy to install and use. It requires no configuration or installation. With its Desktop/Rack mountable design, outstanding performance and quality, the TP-LINK TL-SG1016PE 16-Port Gigabit Desktop/Rack mountable Switch with 8-Port PoE is a great choice for expanding your home or office network.  

Description: Details iShopping.pk brings you the best price for TP-Link JetStream 24-Port Gigabit L2 Managed Switch with 4 SFP Slots (TL-SG3428-V1) with express shipping all over Pakistan.   Details: Full Gigabit Ports: 24× gigabit RJ45 ports and 4× gigabit SFP Slots provide high-speed connections. Integrated into Omada SDN: Zero-Touch Provisioning (ZTP)*, Centralized Cloud Management, and Intelligent Monitoring. Centralized Management: Cloud access and Omada app for ultra-convenience and easy management. Static Routing: Helps route internal traffic for more efficient use of network resources. Robust Security Strategies: IP-MAC-Port Binding, ACL, Port Security, DoS Defend, Storm control, DHCP Snooping, 802.1X, Radius Authentication, and more. Optimize Voice and Video Applications: L2/L3/L4 QoS and IGMP snooping. Standalone Management: Web, CLI (Console Port, Telnet, SSH), SNMP, RMON, and Dual Image bring powerful management capabilities Software Defined Networking (SDN) with Cloud Access Omada’s Software Defined Networking (SDN) platform integrates network devices, including access points, switches and gateways, providing 100% centralized cloud management. Omada creates a highly scalable network—all controlled from a single interface. Seamless wireless and wired connections are provided, ideal for use in hospitality, education, retail, offices, and more. Secure Networking Security features include IP-MAC-Port-VID Binding, Port Security, Storm Control, and DHCP Snooping to defend against a range of network threats. An integrated list of common DoS attacks is available, making it easier than ever to prevent them. In addition, the Access Control Lists (ACL, L2 to L4) feature restricts access to sensitive network resources by denying packets based on source and destination MAC address, IP address, TCP/UDP ports, or VLAN ID. Users’ network access can be controlled via 802.1X authentication, which works with a RADIUS/Tacacs+ server to grant access only when valid user credentials are provided. Advanced QoS Voice and video traffic can be prioritized based on IP address, MAC address, TCP port number, UDP port number, and more. With QoS (Quality of Service), voice and video services remain smooth, even when bandwidth is in short supply. Abundant L2 and L2+ Features A complete lineup of L2 features are supported including 802.1Q VLAN, Port Mirroring, STP/RSTP/MSTP, Link Aggregation Control Protocol, and 802.3x Flow Control. Advanced IGMP Snooping ensures the switch intelligently forwards multicast streams to only the appropriate subscribers, cutting out unnecessary traffic, while IGMP throttling & filtering restrict each subscriber on a port level to prevent unauthorized multicast access. Static Routing is a simple way of segmenting the network and internally routs traffic through the switch for improved efficiency. ISP Features QinQ, L2PT, PPPoE ID Insertion, and IGMP authentication features are provided, developed with service providers in mind. 802.3ah OAM and Device Link Detection Protocol (DLDP) offer easy monitoring and troubleshooting of Ethernet links. IPv6 Support IPv6 functions such as Dual IPv4/IPv6 Stack, MLD Snooping, IPv6 ACL, DHCPv6 Snooping, IPv6 Interface, Path Maximum Transmission Unit (PMTU) Discovery and IPv6 Neighbor Discover guarantee your network is ready for the Next Generation Network (NGN) without upgrading your hardware. Enterprise Level Management Features Easy to manage via an intuitive web-based Graphical User Interface (GUI) or an industry-standard Command Line Interface (CLI). For both management methods, traffic is protected through SSL or SSH encryption. SNMP (v1/v2c/v3) and RMON support enables the switch to be polled for valuable status information and to send traps on abnormal events.   Specifications: HARDWARE FEATURES Interface • 24× 10/100/1000 Mbps RJ45 Ports • 4× Gigabit SFP Slots • 1× RJ45 Console Port • 1× Micro-USB Console Port Fan Quantity Fanless Power Supply 100-240 V AC~50/60 Hz Dimensions (W x D x H) 17.3 × 7.1 × 1.7 in (440 × 180 × 44 mm) Mounting Rack Mountable Max Power Consumption 19.22 W (110 V/60 Hz) Max Heat Dissipation 65.58 BTU/h (110 V/60 Hz) PERFORMANCE Switching Capacity 56 Gbps Packet Forwarding Rate 41.66 Mpps MAC Address Table 8K Jumbo Frame 9 KB SOFTWARE FEATURES Quality of Service • 8 priority queues • 802.1p CoS/DSCP priority • Queue scheduling - SP (Strict Priority) - WRR (Weighted Round Robin) - SP+WRR • Bandwidth Control - Port/Flow based Rating Limiting • Smoother Performance • Action for Flows - Mirror (to supported interface) - Redirect (to supported interface) - Rate Limit - QoS Remark L2 and L2+ Features • Link Aggregation - Static link aggregation - 802.3ad LACP - Up to 8 aggregation groups and up to 8 ports per group • Spanning Tree Protocol - 802.1d STP - 802.1w RSTP - 802.1s MSTP - STP Security: TC Protect, BPDU Filter, BPDU Protect, Root Protect, Loop Protect • Loopback Detection - Port-based - VLAN based • Flow Control - 802.3x Flow Control - HOL Blocking Prevention • Mirroring - Port Mirroring - CPU Mirroring - One-to-One - Many-to-One - Tx/Rx/Both L2 Multicast • Supports 511 (IPv4, IPv6) IGMP groups • IGMP Snooping - IGMP v1/v2/v3 Snooping - Fast Leave - IGMP Snooping Querier - IGMP Authentication • IGMP Authentication • MVR • MLD Snooping - MLD v1/v2 Snooping - Fast Leave - MLD Snooping Querier - Static Group Config - Limited IP Multicast • Multicast Filtering: 256 profiles and 16 entries per profile VLAN • VLAN Group - Max 4K VLAN Groups • 802.1q Tagged VLAN • MAC VLAN: 12 Entries • Protocol VLAN: Protocol Template 16, Protocol VLAN 16 • GVRP • VLAN VPN (QinQ) - Port-Based QinQ - Selective QinQ • Voice VLAN Access Control List • Time-based ACL • MAC ACL - Source MAC - Destination MAC - VLAN ID - User Priority - Ether Type • IP ACL - Source IP - Destination IP - Fragment - IP Protocol - TCP Flag - TCP/UDP Port - DSCP/IP TOS - User Priority • Combined ACL • Packet Content ACL • IPv6 ACL • Policy - Mirroring - Redirect - Rate Limit - QoS Remark • ACL apply to Port/VLAN Security • IP-MAC-Port Binding - DHCP Snooping - ARP Inspection - IPv4 Source Guard • IPv6-MAC-Port Binding - DHCPv6 Snooping - ND Detection - IPv6 Source Guard • DoS Defend • Static/Dynamic Port Security - Up to 64 MAC addresses per port • Broadcast/Multicast/Unicast Storm Control - kbps/ratio/pps control mode • IP/Port/MAC based access control • 802.1X - Port based authentication - Mac based authentication - VLAN Assignment - MAB - Guest VLAN - Support Radius authentication and accountability • AAA (including TACACS+) • Port Isolation • Secure web management through HTTPS with SSLv3/TLS 1.2 • Secure Command Line Interface (CLI) management with SSHv1/SSHv2 IPv6 • IPv6 Dual IPv4/IPv6 • Multicast Listener Discovery (MLD) Snooping • IPv6 ACL • IPv6 Interface • Static IPv6 Routing • IPv6 neighbor discovery (ND) • Path maximum transmission unit (MTU) discovery • Internet Control Message Protocol (ICMP) version 6 • TCPv6/UDPv6 • IPv6 applications - DHCPv6 Client - Ping6 - Tracert6 - Telnet (v6) - IPv6 SNMP - IPv6 SSH - IPv6 SSL - Http/Https - IPv6 TFTP L3 Features • 16 IPv4/IPv6 Interfaces • Static Routing - 48 static routes • Static ARP • 316 ARP Entries • Proxy ARP • Gratuitous ARP • DHCP Server • DHCP Relay • DHCP L2 Relay Management • Web-based GUI • Command Line Interface (CLI) through console port, telnet • SNMPv1/v2c/v3 - Trap/Inform - RMON (1, 2, 3, 9 groups) • SDM Template • DHCP/BOOTP Client • 802.1ab LLDP/LLDP-MED • DHCP AutoInstall • Dual Image, Dual Configuration • CPU Monitoring • Cable Diagnostics • EEE • Password Recovery • SNTP • System Log Advanced Features • Support Omada Hardware Controller (OC200/OC300), Software Controller, Cloud-Based Controller • Automatic Device Discovery • Batch Configuration • Batch Firmware Upgrading • Intelligent Network Monitoring • Abnormal Event Warnings • Unified Configuration • Reboot Schedule • ZTP (Zero-Touch Provisioning)* OTHERS Certification CE, FCC, RoHS Environment • Operating Temperature: 0–45 ℃ (32–113 ℉); • Storage Temperature: -40–70 ℃ (-40–158 ℉) • Operating Humidity: 10–90% RH non-condensing • Storage Humidity: 5–90% RH non-condensing

Description: Details iShopping.pk brings you the best price for TP-Link 8-Port Gigabit Desktop Switch with 4-Port PoE (TL-SG1008P) with express shipping all over Pakistan.   Features: • 8 10/100/1000Mbps RJ45 ports •  With four PoE ports, transfers data and power on one single cable •  Working with IEEE 802.3af compliant PDs, expands home and office network •  Requires no configuration and installation  •  802.1p/DSCP QoS enable smooth latency-sensitive traffic • Supports PoE power up to 15.4W for each PoE port • Supports PoE power up to 55W for all PoE ports • Supports PoE IEEE 802.3af compliant PDs • Supports IEEE 802.3x flow control for Full-duplex Mode and backpressure for Half-duplex Mode • 4K entry MAC address table of the TL-SG1008P with auto-learning and auto-aging • 802.1p/DSCP QoS enable smooth latency-sensitive traffic • LED indicators for monitoring power, link, activity and speed • External power adapter supply   Specification: HARDWARE Interface 8 10/100/1000Mbps RJ45 Ports AUTO Negotiation/AUTO MDI/MDIX Network Media 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 100BASE-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Fan Quantity Fanless Power Consumption 65.2W (max. with 55w PoE device connected) 5.5W (max. no PoE device connected) External Power Supply External Power Adapter(Output: 48VDC / 1.25A) PoE Ports (RJ45) Standard: 802.3 af compliant PoE Ports: Port1- Port4 Power Supply: 55W Backbound Bandwidth 16Gbps Mac Address Table 4K Dimensions (W x D x H) 6.7*3.9*1.1 in. (171*98*27 mm) SOFTWARE Transmission Method Store-And-Forward Advanced Functions Compatible With IEEE 802.3af Compliant PDs Priority Function Mac Address Auto-Learning And Auto-Aging EEE802.3x Flow Control 802.1p/DSCP QoS OTHERS Certification CE, FCC, RoHS Consumption 65.2W (max. with 55w PoE device connected) 5.5W (max. no PoE device connected) Environment Operating Temperature: 0°C~40°C (32°F~104°F) Storage Temperature: -40°C~70°C (-40°F~158°F) Operating Humidity: 10% ~ 90% non-condensing Storage Humidity: 5%~90% non-condensing   What This Product Does 8-Port Gigabit Desktop Switch with 4-Port PoE provides the seamless network connection. It integrates 1000Mbps Gigabit Ethernet and 10/100Mbps Fast Ethernet network capabilities.    How This Product Works 4 of the 8 Auto-Negotiation RJ45 ports (port-1 to port-4) of the switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc.     Overload Arrangement TL-SG1008P has the priority* function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is >= 55W, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port.     Port Priority Function Priority (port 1=port 2=port 3>port 4): This function will help protect the system if the system power becomes overloaded. For example, Port 1, 2 and 4 are using 15.4W (maximum power per port is 15.4W), the system power is 46.2W in total. If there is an additional PD inserted to Port 3 with 10W then the system will cut off Port 4 to protect the system, this means Port 1, 2 will use 15.4W, and Port3 will use 10W, and no power will be supplied to Port 4.   Easy To Use TL-SG1008P is easy to install and use. It requires no configuration and installation. With desktop design, outstanding performance and quality, the TP-LINK TL-SG1008P 8-Port Gigabit Desktop Switch with 4-Port PoE is a great selection for expanding your home or office network. 

Product Description           TP-LINK's 8-Port 10/100Mbps Desktop Switch With 4-Port PoE The 8-Port 10/100Mbps Desktop Switch with 4-Port PoE provides a seamless network connection. It integrates 100Mbps Fast Ethernet and 10Mbps Ethernet network capabilities. How This Product Works Four of the eight Auto-Negotiation RJ45 ports (port-1 to port-4) of the switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc. Overload Arrangement TL-SF1008P has the priority function, which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is greater than or equal to 53W, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port. Port Priority Function Priority (port-1>port-2>port-3>port-4): This function will help protect the system if the system power becomes overloaded. For example, Port 1, 2, and 4 are using 15.4w (maximum power per port is 15.4W), the system power is 46.2w in total (PoE max LED is red). If there is an additional PD inserted to Port 3 with 10w then the system will cut off Port 4 to protect the system; this means that Port 1 and 2 will use 15.4w, Port3 will use 10w, and no power will be supplied to Port 4. Easy To Use TL-SF1008P is easy to install and use. It requires no configuration and installation. With desktop design, outstanding performance, and quality, the TP-LINK TL-SF1008P8-Port 10/100Mbps Desktop Switch with 4-Port PoE is a great choice for expanding your home or office network. Package Contents TL-SF1008P switch Power cord Power adapter Installation guide

Introducing the NEW 9th Gen Intel® Core™ desktop processors - the most powerful generation of Intel® Core™ desktop processors.    Introducing the NEW 9th Gen Intel® Core™ desktop processors - the most powerful generation of Intel® Core™ desktop processors. Whether you are a gamer looking for a fantastic in-game experience with the performance headroom for smooth live streaming and seamless highlights recording or you are a creator that is ready to do more creating and sharing, less time waiting, this new generation of processors is ready to take you to that new level. A New Level of Performance The 9th Gen Intel® Core™ processor takes mainstream desktop PC performance to a whole new level. At the top of the stack, our mainstream flagship, the new i9-9900K. The first Intel® Core™ i9 desktop processor for the mainstream users. Best in class, the i9-9900K with 16MB of cache 1 and Intel® Turbo Boost 2.0 technology cranks maximum turbo frequency up to blazing 5.0 GHz. Throw in high performing 16-way multitasking support powered by 8 cores with Intel® Hyper-Threading Technology (Intel® HT Technology) to conquer the most demanding workloads. Want to reach for even greater levels of performance? — Overclock confidently with new and enhanced features like Solder Thermal Interface Material (STIM) and improved overclocking customizations to tweak the processor performance to its unleashed potential. 2   The NEW 9th Generation of Intel® Core™ Desktop Processor Delivers: A range of processors including the first unlocked Intel® Core™ i9 mainstream desktop processor. Data acceleration when paired with Intel® Optane™ memory to retrieve that data you use the most for fast system responsiveness. 1 DDR4 RAM memory technology support, which allows systems to have up to 64 GB of memory and up to 2666 MT/s memory transfer speeds. Intel® Z390 chipset support which includes unprecedented connectivity to all of your devices with integrated USB 3.1 Gen 2, Intel® Wireless-AC, and support for Gigabit Wi-Fi speed. Compatible with Intel® 300 series chipset. Game on a Whole New Level Game, Record, Stream without compromise on a system powered by a 9th Generation Intel® Core™ i9 processor. Utilize Intel® Quick Sync Video technology to live-stream, capture, and multitask without interruption. Power up and customize your gaming rig with up to 40 platform PCIe* lanes giving you the outstanding flexibility. Pair it with Intel® Optane™ memory technology to accelerate the loading and launching of the games you play the most.   Create Without Limits Unlock your creative potential with the power you need to create, edit, and share. Let your creativity flow as the 9th Generation Intel® Core™ processor renders and encodes in the background so you don’t miss a beat. Minimize the wait time between inspiration and creation with Intel® Optane™ memory accelerating the loading of your most used applications. Ultra-High Definition Entertainment Desktop computers based on the 9th Generation Intel® Core™ processors integrate advanced media technologies that bring premium, high-quality content to your desktop, including: HEVC 10-bit encode/decode, VP9 10-bit decode: - Delivering smooth streaming of premium 4K UHD entertainment to your PC from leading online providers. - Providing full-size, screen-immersive viewing experiences with 4K video and 360-degree viewing. High Dynamic Range (HDR) and Rec. 2020 (Wide Color Gamut) for life-like luminesces to provide enhanced image and video viewing experiences. Hardware Based Security 1 9th Generation Intel® Core™ processors integrate hardware level technologies that help strengthen the protection of your enabled security 1  software. Hardware-based security helps you experience online and offline activities with added peace of mind, enabled by features that include: Intel® Software Guard Extensions (Intel® SGX) 1  to help applications protect your system and your data. Intel® BIOS Guard and Intel® Boot Guard to help protect your system during startup. Scalable Portfolio of Processors A 9th Generation Intel® Core™ processor is a great investment in your desktop experiences — whether for gaming, creating, entertainment, or general purpose computing — wherever your life takes you. From the bar-raising performance of the 9th Generation Intel® Core™ i9-9900K processor with up to 5GHz and 16-way multitasking to great value entry-level performance options down the stack, our latest generation of desktop processors offers a range of options for your budgets and needs. Step Up to the Next Level with 9th Gen Intel® Core™ Desktop Processors 9th Gen is the most powerful generation of Intel® Core™ desktop processors, with features and enhancements to evoke excitement in what you love to do. Step up to a 9th Gen Intel® Core™ processor-powered PC and experience the difference.  

  Description The Cisco Catalyst 3560 v2 Series is the next-generation energy-efficient Layer 3 fast Ethernet switches. This series of switches supports Cisco EnergyWise technology, which enables companies to measure and manage power consumption of network infrastructure and network-attached devices, thereby reducing their energy costs and their carbon footprint. The Cisco Catalyst 3560 v2 Series consumes less power than its predecessors and is the ideal access layer switch for enterprise, retail, and branch-office environments, as it maximizes productivity and investment protection by enabling a unified network for data, voice, and video. Product Features Redundant power system The Cisco Catalyst 3560 v2 Series access switches support the generation of Cisco RPS 2300, which increases availability in a converged data, voice, and video network by providing transparent power backup to two of six attached Cisco Catalyst 3560 v2 Series switches at the same time. The Cisco Catalyst 3560 v2 Series switches are capable of reverting back to their internal power supply without any service interruption. Ease of use and deployment The Cisco Catalyst 3560 v2 series offers several ease of use features, which enable fast and easy configuration of advanced Cisco Catalyst capabilities. Enhanced security With the wide range of security features, such as ACLs, authentication, port-level security, and identity based network services (IBNS) with 802.1x and extensions, that the Cisco Catalyst 3560 v2 Series offers, businesses can protect important information, keep unauthorized people off the network, guard privacy, and maintain uninterrupted operation. switch. Product Details Device Type Switch - 24 ports - L3 - Managed Enclosure Type Rack-mountable 1U Interfaces Fast Ethernet Ports 24 x 10/100 + 2 x SFP Performance Switching capacity: 32 Gbps Capacity Switched virtual interfaces (SVIs): up to 1000 Virtual interfaces (VLANs): 1000 MAC Address Table Size 12K entries Jumbo Frame Support 9016 Routing Protocol RIP-1, RIP-2, HSRP, static IP routing Remote Management Protocol SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s Power AC 120/230 V (50/60 Hz) Dimensions (WxDxH) 44.3 cm x 29.5 cm x 4.4 cm Weight 3.7 kg Manufacturer Warranty Limited lifetime warranty Show Detailed Specification Show Detailed Specification General Device Type Switch - 24 ports - L3 - Managed Enclosure Type Rack-mountable - 1U Subtype Fast Ethernet Ports 24 x 10/100 + 2 x SFP Performance Switching capacity: 32 Gbps Capacity Switched virtual interfaces (SVIs): up to 1000 Virtual interfaces (VLANs): 1000 MAC Address Table Size 12K entries Jumbo Frame Support 9016 Routing Protocol RIP-1, RIP-2, HSRP, static IP routing Remote Management Protocol SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH Encryption Algorithm SSL Authentication Method Kerberos, RADIUS, TACACS+, Secure Shell v.2 (SSH2) Features Layer 3 switching, Layer 2 switching, auto-sensing per device, DHCP support, auto-negotiation, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, traffic shaping, MAC address filtering, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, Dynamic ARP Inspection (DAI), Time Domain Reflectometry (TDR), Per-VLAN Spanning Tree Plus (PVST+) Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s Flash Memory 32 MB Flash Status Indicators Link activity, port duplex mode, bandwidth utilization %, power, link OK, system Expansion / Connectivity Interfaces 24 x 100Base-TX - RJ-45 1 x console - RJ-45 - management 2 x Ethernet 1000 - SFP (mini-GBIC) Power Contact: SA Computer SHOP# 61,62,73,74,77 1ST FLOOR MAKKAH CENTER HALL ROAD LAHORE Cell:03454113314 Ptcl# 04237353809 (Note) Don't send me sms never reply Just call only interested Person. We Have Delivery facility In Lahore Region........... Remember Us In Ur Pray....

Description: Details iShopping.pk brings you the best price for TP-Link 8-Port Gigabit Desktop/Rackmount Switch with PoE+ (TL-SG1008PE) with express shipping all over Pakistan.   Features: • 8 10/100/1000Mbps RJ45 ports •  Equipped with 8 PoE+ supported ports to transfer data and power over a single cable •  Works with IEEE 802.3af/at compliant devices, expanding home and office networks •  Innovative energy-efficient technology reduces power output by up to 75% •  Plug and play design, no configuration required • Equipped with 8 PoE+ ports • Supports PoE+ standard with total power budget of 124W and up to 30W per port • Supports PoE+ IEEE 802.3af/at compliant devices • Supports IEEE 802.3x flow control for Full-duplex Mode and backpressure for Half-duplex Mode • 8K entry MAC address table of the TL-SG1008PE with auto-learning and auto-aging • LED indicators to monitoring power, link, activity and speed • Internal power supply   Specification: HARDWARE Interface 8 10/100/1000Mbps RJ45 Ports AUTO Negotiation/AUTO MDI/MDIX Network Media 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 100BASE-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Fan Quantity 1 Power Supply 100-240VAC, 50/60Hz Power Consumption Maximum (PoE on): 133.8W (220V/50Hz) Maximum (PoE off): 9.8W (220V/50Hz) PoE+ Ports(RJ45) Standard: 802.3at/af compliant PoE+ Ports: 8 Ports Power Supply: 124W Backbound Bandwidth 16Gbps Mac Address Table 8K Buffer Size 2Mbits Dimensions (W x D x H) 11.6*7.1*1.7 in. (294*180*44 mm) SOFTWARE Advanced Features Compatible With IEEE 802.3af/at Compliant PDs Priority Function Mac Address Auto-Learning And Auto-Aging IEEE802.3x Flow Control For Full-Duplex Mode And Backpressure For Half-Duplex Mode Transfer Method Store-And-Forward OTHERS Certification FCC, CE, RoHS Consumption 9.5 watts (max. no PD connected) 140.1 watts (max. with 124w PD connected) Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing   What This Product Does The TL-SG1008PE is an 8-Port Gigabit Desktop/Rack mountable Switch with all 8 ports supporting the PoE+ standard. It provides a simple way to expand a wired network by transferring power and data over a single Ethernet Cable. With a total power budget of 124W, up to 30W per port, TL-SG1008PE can power more high-powered devices such as wireless Access Points (APs), IP Cameras or IP Phones. Moreover, with innovative energy-efficient technology, the TL-SG1008PE can save up to 75% of the power consumption, making it an eco-friendly solution for your business network.   How This Product Works All 8 ports of TL-SG1008PE support Power over Ethernet Plus (PoE+) standard which can automatically detect and supply power to any IEEE 802.3af/at compliant device(s). In this situation, the electrical power is transmitted along with data in a single cable, allowing you to expand your network where there are electrical cables or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones.   Overload Arrangement TL-SG1008PE has a priority function which helps protect the system when its power is overloaded. If all PoE+ devices’ power consumption is greater than or equal to 124W, a priority will be arranged among the 8 PoE+ ports, at which point the system will cut off the power of the lowest-priority port.     Port Priority Function *Priority (port 1 > port 2 > port 3 > port 4 > port 5 > port 6 > port F > port 8): This function helps protect the system if the power becomes overloaded. For example, if port 1, 2, 4 and 7 are using 30W (maximum power per port is 30W, the system power is 120W in total), and there is an additional device inserted into Port 3 at 25W, the system will cut off the power of Port 7 in response to the power exceeding the 120W limit., This means Port 1, 2 and 4 will use 30W, and Port 3 will use 25W, with no power will be supplied to Port 7 as it has the lowest designated priority among the ports in use.    Easy To Use TL-SG1008PE is easy to install and use. It requires no configuration or installation. With its Desktop/Rack mountable design, outstanding performance and quality, the TP-LINK TL-SG1008PE 8-Port Gigabit Desktop/Rack mountable Switch with 8-Port PoE is a great choice for expanding your home or office network.

Description: Details iShopping.pk brings you the best price for Cisco Wireless-AC Dual Radio Wave 2 Access Point with 2.5GbE LAN Data Sheet (WAP581-E-K9) with 1 year official warranty and express shipping all over Pakistan   Features: ● Concurrent dual-band radio support offers up to 2.1 Gbps on a 5.0-GHz radio and 600 Mbps on a 2.4-GHz radio to use capacity and coverage most efficiently. ● Robust security, including WPA2, 802.1X with RADIUS secure authentication, and rogue access point detection, help protect sensitive business information. ● Wi-Fi Scheduler allows you to control your Wi-Fi network access during business and non-business hours. ● An integrated Wireless Packet Capture tool assists tech support in troubleshooting. ● Intelligent QoS prioritizes network traffic to help keep critical network applications running at top performance. ● Support for power-saving sleep mode and port control features help increase energy efficiency. ● Workgroup Bridge mode lets you expand your network by wirelessly connecting to a second Ethernet network. ● Support for IPv6 lets you deploy future networking applications and operating systems without costly upgrades. ● Sleek design with multiple internal antennas and a versatile mounting kit allows for installation on a ceiling, wall or desktop. ● Offers limited lifetime hardware warranty provides peace of mind.   Specifications: Standards IEEE 802.11ac, 802.11a, 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (spanning tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), and IPv6 (RFC 2460) Cabling type Category 5e or better Antennas Internal antennas optimized for installation on a wall or ceiling Operating system Linux Software Physical Interfaces Ports 2 GE ports - one 2.5G and second one 10/100/1000 Ethernet, with support for 802.3at at PoE; support is only for port 1 Buttons Reset button Lock slot Slot for Kensington lock LEDs One multifunction LED Physical Specifications Physical dimensions 1.5 x 9.0 x 9.0 in. (38x 229 x 229 mm) (H x W x D) Weight 3 lb (1.4kg) Network Capabilities VLAN support Yes Number of VLANs 1 management VLAN plus 32 VLANs for SSIDs 802.1X supplicant Yes Service Set Identifier (SSID)-to-VLAN mapping Yes Auto-channel selection Yes Spanning tree Yes Load balancing Yes IPv6 Yes ●  IPv6 host support ●  IPv6 RADIUS, syslog, and Network Time Protocol (NTP) Layer 2 802.1Q-based VLANS, 32 active VLANS plus 1 management VLAN Security W-Fi Protected Access (WPA) and WPA2 Yes, including enterprise authentication Access control Yes, management access control list (ACL) plus MAC ACL Secure management Secure HTTP (HTTPS) SSID broadcast Yes Rogue access point detection Yes Mounting and Physical Security Multiple mounting options Mounting bracket included for easy ceiling or wall mounting Physical security lock Kensington lock slot Quality of Service QoS Wi-Fi Multimedia and Traffic Specification (WMM TSPEC) and client QoS Performance Wireless throughput Up to 2.8-Gbps data rate (real-world throughput varies) Recommended user support Up to 200 connective users; 50 active users per radio Multiple Access Point Management Single Point Setup Yes Number of access points per cluster 16 Active clients per cluster 960 Configuration Web user interface Built-in web user interface for easy browser-based configuration (HTTP and HTTPS) Management Management protocols Web browser, Simple Network Management Protocol (SNMP) v3, and Bonjour Remote management Yes Event logging Local, remote syslog, and email alerts Network diagnostics Logging and packet capture Web firmware upgrade Firmware upgradable through web browser; imported or exported configuration file Dynamic Host Configuration Protocol (DHCP) DHCP client IPv6 host Yes HTTP redirect Yes Wireless Frequency Dual concurrent radios (2.4 and 5 GHz) Radio and modulation type Dual radio, orthogonal frequency division multiplexing (OFDM) IEEE 802.11a/n: OFDM (BPSK/QPSK/16QAM/64QAM/256QAM) IEEE 802.11ac: OFDM (BPSK/QPSK/16QAM/64QAM/256QAM) WLAN 802.11n/ac 4 x 4 MU-MIMO at 5 GHz and 3 x 3 MIMO on 2.4 GHz 21 for 20-MHz bandwidth; 9 for 40-MHz bandwidth; 4 for 80-MHz bandwidth 11 for 20-MHz bandwidth; 7 for 40-MHz bandwidth 802.11 dynamic frequency selection (DFS) Data rates supported IEEE 802.11b: DSSS (1/2/5.5/11) IEEE 802.11g: OFDM (6/9/12/18/24/36/48/54) IEEE 802.11n: Refer to the entries for this standard later in this list) IEEE 802.11b: 12.94 MHz IEEE 802.11g: 24.49 MHz EEE 802.11n MCS0 (HT20): 27.44 MHz IEEE 802.11n MCS0 (HT40): 36.18 MHz IEEE 802.11b: 29.76 dBm IEEE 802.11g: 29.24 dBm IEEE 802.11n MCS0 (HT20): 29.25 dBm IEEE 802.11n MCS0 (HT40): 23.81 dBm Frequency band and operating channels Frequency Band Channel No. Frequency Channel No. Frequency 2400~2483.5MHz 1 2412 MHz 7 2442 MHz 2 2417 MHz 8 2447 MHz 3 2422 MHz 9 2452 MHz 4 2427 MHz 10 2457 MHz 5 2432 MHz 11 2462 MHz 6 2437 MHz - - Frequency Band Channel No. Frequency Channel No. 5150- to 5250-MHz Band 1 36 5180 MHz 44 38 5190 MHz 46 40 5200 MHz 48 42 5210 MHz - 52 5260 MHz 60 54 5270 MHz 62 5250- to 5350-MHz Band 2 56 5280 MHz 64 58 5290 MHz - 100 5500 MHz 112 102 5510 MHz 116 104 5520 MHz 132 5470- to 5725-MHz Band 3 106 5530 MHz 134 108 5540 MHz 136 110 5550 MHz 140 149 5745 MHz 157 151 5755 MHz 159 5725- to 5850-MHz Band 4 153 5765 MHz 161 155 5775 MHz 165 Transmitted output power Transmitted Output Power: 2.4 GHz ●  802.11b: 20.0 +/– 1.5 dBm @ CH6, all rates ●  802.11g: 20.0 +/– 1.5 dBm@ CH6, 6 Mbps ●  802.11g: 17.0 +/– 1.5 dBm@ CH6, 54 Mbps ●  802.11n(HT20): 20.0 +/– 1.5 dBm@ CH6, MCS0 ●  802.11n(HT20): 17.0 +/– 1.5 dBm@ CH6, MCS7 ●  802.11n(HT40): 16.0 +/– 1.5 dBm@ CH6, MCS7 5-GHz UNII-1 (5150~5250 MHz) ●  802.11a: 22.0 +/– 2 dBm @ 6 Mbps ●  802.11a: 20.0 +/– 2 dBm @ 54 Mbps ●  802.11ac(VHT20): 22.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT20): 14.0 +/– 2 dBm @ MCS8 ●  802.11ac(VHT40): 21.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT40): 14.0 +/– 2 dBm @ MCS9 ●  802.11ac(VHT80): 20.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT80): 14.0 +/– 2 dBm @ MCS9 5-GHz UNII-2 (5250–5350 MHz)/UNII-2 Extended (5470–5725 MHz) ●  802.11a: 22.0 +/– 2 dBm @ 6 Mbps ●  802.11a: 20.0 +/– 2 dBm @ 54 Mbps ●  802.11ac(VHT20): 22.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT20): 14.0 +/– 2 dBm @ MCS8 ●  802.11ac(VHT40): 21.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT40): 14.0 +/– 2 dBm @ MCS9 ●  802.11ac(VHT80): 20.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT80): 14.0 +/– 2 dBm @ MCS9 5GHz UNII-3 (5725~5850MHz) ●  802.11a: 22.0 +/– 2 dBm @ 6 Mbps ●  802.11a: 20.0 +/– 12 dBm @ 54 Mbps ●  802.11ac(VHT20): 22.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT20): 14.0 +/– 2 dBm @ MCS8 ●  802.11ac(VHT40): 21.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT40): 14.0 +/– 2 dBm @ MCS9 ●  802.11ac(VHT80): 20.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT80): 14.0 +/– 2 dBm @ MCS9 Wireless isolation Wireless isolation between clients External antennas None Internal antennas 4 Internal fixed PIFA antenna Antenna gain in dBi 3.61 dBi @2.4 GHz; 6.23 dBi @5 GHz Receiver sensitivity 2.4 GHz ●  802.11b: –86 dBm @ 11Mbps ●  802.11g: –73 dBm @ 54 Mbps ●  802.11n(HT20): –71 dBm @ MCS7 ●  802.11n(HT40): –67 dBm @ MCS7 5GHz ●  802.11a: –90 dBm @ 6 Mbps ●  802.11a: –74 dBm @ 54 Mbps ●  802.11ac(VHT20): –66 dBm @ MCS8 ●  802.11ac(VHT40): –62 dBm @ MCS9 ●  802.11ac(VHT80): –58 dBm @ MCS9 Wireless distribution system (WDS) Yes Fast roaming Yes Multiple SSIDs 16 per radio Wireless VLAN map Yes WLAN security Yes Wi-Fi Multimedia (WMM) Yes, with unscheduled automatic power save Operating Modes Access point Access point mode, Wireless Domain Services (WDS) bridging, and Workgroup Bridge mode Environmental Power options IEEE 802.3at/af Ethernet switch Cisco power injector: SB-PWR-INJ2-xx Cisco power adapter: SB-PWR-48v-xx Peak power: 18 watts Compliance Safety: ●  UL 60950-1 ●  CAN/CSA-C22.2 No. 60950-1 ●  IEC 60950-1 ●  EN 60950-1 Radio approvals: ●  FCC Part 15.247, 15.407 ●  RSS-210 (Canada) ●  EN 300.328, EN 301.893 (Europe) ●  AS/NZS 4268.2003 (Australia and New Zealand) EMI and susceptibility (Class B): ●  FCC Part 15.107 and 15.109 ●  ICES-003 (Canada) ●  EN 301.489-1 and -17 (Europe) Operating temperature 32 to 104°F) (0 to 40°C) Storage temperature –4 to 158°F (–20 to 70°C) Operating humidity 10 to 85% noncondensing Storage humidity 5 to 90% noncondensing System memory 256-MB RAM 128-MB flash

20W high power, Charge fast for tablets and phones which support PD3.0 and QC3.0 fast charging protocol. Output 2500W, suitable for: any size of household appliances and mobile devices. Simultaneously helps to protect multiple-electronic devices while accommodating large adapters. With US/UK/EU plug. One device with 2 outlets & 4 USB ports which can charge for multiple devices simultaneously. Protect up to 6 devices against spikes, fluctuations, and electromagnetic interference.

DESCRIPTION For Fast Response Please Contact Via Call Sms Whatsapp Only. UGREEN USB 3.O To Gigabit Network Adapter (Brand New Condition WithOut Box). UGREEN USB to Ethernet Adapter, USB 3.O to 1O 1OO 1OOO Mbps Gigabit Network Adapter, USB to RJ45 LAN Ethernet Adapter for Laptop PC Nintendo Switch MacBook Surface Windows macOS Linux. Ugreen USB 3.O male A to RJ45 female ethernet adapter connects your computer or tablet to a router,modem or network switch for network connection. It adds a standard RJ45 port to your Ultrabook, notebook or Macbook Air for file transferring, video conferencing, gaming, and HD video streaming. Protect or Replace a Broken Ethernet Port. USB 3.O to Gigabit Ethernet Adapter is a good accessory to protect the RJ45 Lan port in your expensive computer, or replace a broken Ethernet port. Speed up to 5Gbps. Full 1O/1OO/1OOOMbps gigabit ethernet performance over USB 3.O’s 5Gbps bus, faster and more reliable than most wireless connections. Link and Activity LEDs. USB powered, no external power required. Backward compatible with USB 2.O/1.1. Mini Portable. UGREEN USB rj45 adapter is mini and portable, perfect to take on the go. Wide Compatibility. This USB RJ45 adapter work with Windows 8.1/8/7/Vista/XP, Mac OSX 1O.6/1O.7/1O.8/1O.9/1O.1O/1O.11/1O.12, Linux kernel 3.x/2.6, and Chrome OS. DO NOT SUPPORT Windows RT and Android. Compatible with IEEE 8O2.3, IEEE 8O2.3u and IEEE 8O2.3ab. Supports IEEE 8O2.3az (Energy Efficient Ethernet). Orignal Pictures Attached. Courier Services Over All Pakistan. Jamshed Road, Karachi, Sindh, Pakistan

DESCRIPTION USB Ethernet Adapter Ugreen USB 3.0 male A to RJ45 female ethernet adapter connects your computer or tablet to a router,modem or network switch for network connection. It adds a standard RJ45 port to your Ultrabook, notebook or Macbook Air for file transferring, video conferencing, gaming, and HD video streaming. Protect or Replace a Broken Ethernet Port USB 3.0 to Gigabit Ethernet Adapter is a good accessory to protect the RJ45 Lan port in your expensive computer, or replace a broken Ethernet port. Speed up to 5Gbps Full 10/100/1000Mbps gigabit ethernet performance over USB 3.0’s 5Gbps bus, faster and more reliable than most wireless connections. Link and Activity LEDs. USB powered, no external power required. Backward compatible with USB 2.0/1.1. Mini Portable UGREEN USB rj45 adapter is mini and portable, perfect to take on the go. Wide Compatibility This USB RJ45 adapter work with Windows 8.1/8/7/Vista/XP, Mac OSX 10.6/10.7/10.8/10.9/10.10/10.11/10.12, Linux kernel 3. x/2.6, and Chrome OS. DO NOT SUPPORT Windows RT and Android. Compatible with IEEE 802.3, IEEE 802.3u and IEEE 802.3ab. Supports IEEE 802.3az (Energy Efficient Ethernet). Block E House 97, PIA Housing Society, Lahore, Punjab, Pakistan

TP-Link Archer AX55 AX3000 Dual Band Gigabit Wi-Fi 6 Router OneMesh WPA3 Price in Pakistan Archer AX55 AX3000 Dual Band Gigabit Wi-Fi 6 Router Next-Gen Gigabit Wi-Fi 6 Speed—2402 Mbps on 5 GHz and 574 Mbps on 2.4 GHz band ensure smoother streaming and faster downloads. Connect More Devices—OFDMA technology increases capacity by 4 times to enable simultaneous transmission to more devices. Ultra-Low Latency—Enables more responsive gaming and video chatting. Expanded Wi-Fi Coverage—Four high-gain external antennas and Beamforming technology combine to extend strong, reliable Wi-Fi throughout your home. TP-Link HomeShield - Enhanced security defends against the latest cyber threats. Improved Battery Life—Target Wake Time helps your devices to communicate more while consuming less power. Compatible with Alexa—Control your router via voice commands and make your life smarter and easier with Amazon Alexa. The New Era home Connectivity AX3000 Dual-Band Gigabit Wi-Fi 6 Router Wi-Fi 6 Upgrades Everything The latest generation of Wi-Fi technology brings faster speeds, less lag, and higher capacity, enabling more simultaneous connections on your home network. Incredible Speed Drastically improved speeds enable streaming, fast downloading, and gaming—all at the same time. 5 GHz with 160 MHz channel support doubles the bandwidth, enabling 8K video without lag. More Responsive Experiences Less Loading Wheels Enjoy smooth gaming, video streaming, and live feed simultaneously. OFDMA makes your WiFi stronger by allowing multiple clients to share one band at the same time, which cuts latency and jittering. Powerful CPU and High Memory Connect More without Dropping Speed Behind the Wi-Fi 6 technology structure are the advanced Qualcomm chipset and high memory. Enjoy fast connections with minimal latency even under a heavy load of transmission. Every click for website links and online playback on your laptop and phone just responds quicker. Improved Cooling Design Consistent Full Output No heat-ups, no throttles. A larger heat sink and refined case design cool the WiFi 6 system and enable your network to stay at top speed in more versatile environments. WiFi Coverage Throughout Your Home 4 high-performance external antennas boost WiFi signals throughout your home. Beamforming technology detects devices and concentrates wireless signal strength towards them, especially for previously hard to reach outlets. USB 3.0 Ports Easily share files between connected devices by plugging into an external drive. You can even make it your personal cloud storage and access it from outside securely*. TP-Link OneMesh™Flexibly Create Whole Home WiFi with Archer AX55 Want to build a whole-home Wi-Fi? Archer AX55 supports OneMesh to form seamless whole-home coverage, preventing drops and lag when moving between signals. TP-Link HomeShield: Advanced Security for Your Everyday Devices With TP-Link HomeShield, enjoy advanced security features delivering a safe environment that protects your family and network's data and privacy. Home Network Scanner Real-time network scanner to detect potential threats and security issues. Parental Controls Manage time online and block inappropriate content keeping your family safe online. Quality of Service Assign your favourite devices to have the fastest connections for top performance. Upgrade to HomeShield Pro (Subscription fees apply) DDoS AttackPrevention IoT DeviceProtection Advanced ParentalControls including time Rewards 1-MonthFree Trial WPA3—New Level of Cyber Security The latest Wi-Fi security protocol, WPA3, brings new capabilities to improve cybersecurity in personal networks. More secure encryption in Wi-Fi password safety and enhanced protection against brute-force attacks combine to safeguard your home Wi-Fi. Easy Setup and Use Whether you prefer the intuitive Tether app or TP-Link’s powerful web interface, you can set up your Archer AX55 in minutes. The Tether App allows you to manage network settings from any Android or iOS device. Protect Your Children Block inappropriate content for your children, and customize a time range for better online habits. New Connection Notification You will be notified by your phone when new devices connect. Kick-off any suspicious connections and block them. It’s as simple as that. Easy Firmware Upgrade Tired of upgrading firmware? OTA updates enable easy firmware upgrades with a click in the management panel. To keep your security and functions always up-to-date, just turn on the auto-schedule. †Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput, wireless coverage and number of connected devices are not guaranteed and will vary as a result of network conditions, client limitations, and environmental factors, including building materials, obstacles, volume and density of traffic, and client location.‡Use of 802.11ax (Wi-Fi 6) and its features including OFDMA, HE160, and TWT requires clients to also support corresponding features. The 160 MHz bandwidth may be unavailable in the 5 GHz band in some regions/countries due to regulatory restrictions. Actual power reduction by Target Wake Time may vary as a result of network conditions, client limitations, and environmental factors.§The 802.11ax white paper defines standardized modifications to both the IEEE 802.11 physical layers (PHY) and the IEEE 802.11 Medium Access Control (MAC) layer as enabling at least one mode of operation capable of supporting the improvement of at least four times the average throughput per station (measured at the MAC data service access point) in a dense deployment scenario.?HomeShield includes the Free Basic Plan. Fees apply for the Pro Plan. Visit https://www.tp-link.com/homeshield for more information*Use of WPA3 requires clients to support WPA3. **This router may not support all the mandatory features as ratified in IEEE 802.11ax specification.***Further software upgrade for feature availability may be required.

Description: Details iShopping.pk brings you the best price for TP-Link 8-Port 10/100Mbps Desktop Switch with 4-Port PoE (TL-SF1008P) with express shipping all over Pakistan.   Feaures: • With four PoE ports, transfers data and power on one single cable •  Working with IEEE 802.3af compliant PDs, expands home and office network •  Requires no configuration and installation • Supports PoE power up to 15.4W for each PoE port • Supports PoE power up to 57W for all PoE ports • Supports PoE IEEE 802.3af compliant PDs • Supports IEEE 802.3x flow control for Full-duplex Mode and backpressure for Half-duplex Mode • 2K entry MAC address table of the TL-SF1008P with auto-learning and auto-aging • LED indicators for monitoring power, link, activity • External power adapter supply   Specification: HARDWARE Interface 8 10/100Mbps RJ45 Ports AUTO Negotiation/AUTO MDI/MDIX Network Media 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 100BASE-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Fan Quantity Fanless Power Consumption Maximum (PoE on): 60.2W (220V/50Hz) Maximum (PoE off): 3.2W (220V/50Hz) External Power Supply External Power Adapter(Output: 48VDC / 1.25A) PoE Ports (RJ45) Standard: 802.3 af compliant PoE Ports: Port1- Port4 Power Supply: 57W Backbound Bandwidth 1.6Gbps Mac Address Table 2K Dimensions (W x D x H) 6.7*3.9*1.1 in. (171*98*27 mm) SOFTWARE Transmission Method Store-And-Forward Advanced Functions Compatible With IEEE 802.3af Compliant PDs Priority Function Mac Address Auto-Learning And Auto-Aging IEEE802.3x Flow Control For Full-Duplex Mode And Backpressure For Half-Duplex Mode OTHERS Certification FCC, CE, RoHS Consumption 2.3 watts (max. no PD connected) 59.3 watts (max. with 57w PD connected) Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing   What This Product Does TL-SF1008P is an 8 10/100Mbps ports unmanaged switch that requires no configuration and provides 4 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to ­fix devices such as APs, IP Cameras or IP Phones, etc.   Power over Ethernet 4 of the 8 Auto-Negotiation RJ45 ports (port-1 to port-4) of the switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af compliant Powered Devices (PDs).    Overload Arrangement TL-SF1008P has the priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is >= 57W, a priority will be arranged among the PoE ports, then the system will cut o‑ the power of the lowest-priority port.   Port Priority Function Priority (port-1=port-2=port-3>port-4):  This function will help to ensure the normal operation of the system, it means Port 4 will be cut off when all total PoE PDs power consumption exceed 57W. For an example, Port 1, 2 and 4 is using 15.4W (maximum power for per port is 15.4W); the system power is 46.2W in total. If there is an additional PD inserted to Port 3 with 12W, and then the system will cut off the power of Port 4 because of the overloaded power, this means Port 1, 2 will use 15.4W, and Port3 will use 12W, no power will be supplied to Port 4.   Easy To Use TL-SF1008P is easy to install and use. It requires no confi­guration and installation. With desktop design, outstanding performance and quality, the TP-LINK’s TL-SF1008P 8-Port 10/100Mbps Desktop Switch with 4-Port PoE is an ideal choice for expanding your home or office network.

Description: Details iShopping.pk brings you the best price for HP Color LaserJet Pro M454dn Printer (W1Y44A) with express shipping all over Pakistan.   Features: • Print only • Best -in-class security  • Sustainability is smart business • Print speed letter: Up to 28 ppm (black and color) • Auto duplex printing; 2 paper trays (standard) • Best-in-class security - detect and stop attacks Winning in business means working smarter. The HP Color LaserJet Pro M454 printer is designed to let you focus your time where it’s most effective-helping to grow your business and staying ahead of the competition. Work teams will create high-impact documents that get noticed with the brilliant color delivered by HP office Color Laser printers. Dynamic security enabled printer. Only intended to be used with cartridges using an HP original chip. Cartridges using a non-HP chip may not work, and those that work today may not work in the future. Built to keep you—and your business—moving forward. Help decrease the amount of paper used in the office by printing on both sides of the page. Grab pages and go—without waiting. This device wakes up and prints first page out fast. ROAM compatible for easy printing from virtually anywhere Best -in-class security  A suite of embedded security features help protect your printer from being an entry point for attacks. Help secure confidential information with optional PIN/Pull printing to retrieve print jobs. Optional HP Jet Advantage Security Manager lets you set configuration policies and validate settings. Thwart potential attacks and take immediate action with instant notification of security issues. Simply designed to uncomplicated your day Set up this printer fast and easily manage device settings to help increase overall printing efficiency. Make the most of your office space with a printer that conveniently fits into your work style.Work without delays or messes, with cartridges featuring auto seal removal. Sustainability is smart business Avoid frustrating reprints, wasted supplies, and service calls using Original HP toner cartridges. Help save paper right out of the box. The duplex print setting is set at default paper savings mode. Saves up to 11% energy over prior products. Help save energy with HP Auto-on/Auto-off technology.  Specifications: HP Data Sheet HP Color LaserJet Pro M454 Series Printer Functions Print First page out (ready) black As fast as 9.5 sec First page out (ready) color As fast as 11.1 sec Resolution (black) 600 x 600 dpi, Up to 38, 400 x 600 enhanced dpi Resolution (color) 600 x 600 dpi, Up to 38, 400 x 600 enhanced dpi Resolution technology HP ImageREt 3600, PANTONE® calibrated Monthly duty cycle Up to 50,000 pages Duty cycle is defined as the maximum number of pages per month of imaged output. This value provides a comparison of product robustness in relation to other HP LaserJet or HP Color LaserJet devices, and enables appropriate deployment of printers and MFPs to satisfy the demands of connected individuals or groups. Recommended monthly page volume 750 to 4000 Print Technology Laser Display 2-line backlit LCD graphic display Processor speed 1200 MHz Number of print cartridges 4 (1 each black, cyan, magenta, yellow) Replacement cartridges AMS: For distribution and use in North America and Latin America only: HP 414A Black Original LaserJet Toner Cartridge (~2,400 pages) W2020A; HP 414A Cyan Original LaserJet Toner Cartridge (~2,100 pages) W2021A; HP 414A Yellow Original LaserJet Toner Cartridge (~2,100 pages) W2022A; HP 414A Magenta Original LaserJet Toner Cartridge (~2,100 pages) W2023A; HP 414x Black Original LaserJet Toner Cartridge (~7,500 pages) W2020x; HP 414x Cyan Original LaserJet Toner Cartridge (~6,000 pages) W2021x; HP 414x Yellow Original LaserJet Toner Cartridge (~6,000 pages) W2022x; HP 414x Magenta Original LaserJet Toner Cartridge (~6,000 pages) W2023x; EMEA: For distribution and use in Europe, Middle East, Russia, CIS, and Africa only: HP 415A Black Original LaserJet Toner Cartridge (~2,400 pages) W2030A; HP 415A Cyan Original LaserJet Toner Cartridge (~2,100 pages) W2031A; HP 415A Yellow Original LaserJet Toner Cartridge (~2,100 pages) W2032A; HP 415A Magenta Original LaserJet Toner Cartridge (~2,100 pages) W2033A; HP 415x Black Original LaserJet Toner Cartridge (~7,500 pages) W2030x; HP 415x Cyan Original LaserJet Toner Cartridge (~6,000 pages) W2031x; HP 415x Yellow Original LaserJet Toner Cartridge (~6,000 pages) W2032x; HP 415x Magenta Original LaserJet Toner Cartridge (~6,000 pages) W2033x; APJ: For distribution and use in Asia Pacific only: HP 416A Black Original LaserJet Toner Cartridge (~2,400 pages) W2040A; HP 416A Cyan Original LaserJet Toner Cartridge (~2,100 pages) W2041A; HP 416A Yellow Original LaserJet Toner Cartridge (~2,100 pages) W2042A; HP 416A Magenta Original LaserJet Toner Cartridge (~2,100 pages) W2043A; HP 416x Black Original LaserJet Toner Cartridge (~7,500 pages) W2040x; HP 416x Cyan Original LaserJet Toner Cartridge (~6,000 pages) W2041x; HP 416x Yellow Original LaserJet Toner Cartridge (~6,000 pages) W2042x; HP 416x Magenta Original LaserJet Toner Cartridge (~6,000 pages) W2043x Product disclaimer Dynamic security enabled printer. Only intended to be used with cartridges using an HP original chip. Cartridges using a non-HP chip may not work, and those that work today may not work in the future. Print languages HP PCL 6, HP PCL 5c, HP postscript level 3 emulation, PDF, URF, PWG Raster Automatic paper sensor No Paper trays, standard 2 Paper trays, maximum 3 Mobile Printing Capability Apple AirPrint™; Google Cloud Print™; HP ePrint; HP Smart App and other mobile Apps; Mopria™ Certified; ROAM capable for easy printing; Wi-Fi® Direct printing Connectivity, standard 1 Hi-Speed USB 2.0 port; 1 host USB at rear side; built-in Gigabit Ethernet 10/100/1000 Base-TX network port Security management Secure Boot, Secure Firmware Integrity, Runtime Code Integrity, password protected EWS, secure browsing via SSL/TLS 1.0, TLS 1.1, TLS 1.2; IPP over TLS; Network: enable/disable network ports and features, unused protocol and service disablement, SNMPv1, SNMPv2, and SNMPv3, community password change; HP ePrint: HTTPS with certificate validation, HTTP Basic Access Authentication, SASL authentication; Firewall and ACL; control panel lock, certificates configuration, UPD PIN printing, Syslog, signed firmware, administrator settings, 802.1x authentication (EAP-TLS, and PEAP); Encrypted data storage; Secure data erase; Automatic firmware updates; Secure Encrypted Print via optional job storage, Compatible with optional HP JetAdvantage Security Manager Minimum system requirements 2 GB available hard drive space, Internet connection or USB port, OS hardware requirements see apple.com   2 GB available hard disk space, Internet connection, USB port, Internet browser. For additional OS hardware requirements see microsoft.com Compatible operating systems Windows Client OS (32/64 bit), Win10, Win8.1, Win 8 Basic, Win8 Pro, Win8 Enterprise, Win8 Enterprise N, Win7 Starter Edition SP1, UPD Win7 Ultimate, Mobile OS, iOS, Android, Mac, Apple® macOS Sierra v10.12, Apple® macOS High Sierra v10.13, Apple® macOS Mojave v10.14, Discrete PCL6 Printer Driver, For more information on the supported operating systems go to http://support.hp.com, Enter your product name and search, Click on User Guides and enter your product name and search for User Guide, Search for your (Product Name) User Guide, Search for the Supported Operating Systems section, UPD PCL6 / PS Printer Drivers, Supported Operating systems, For more information on the supported operating systems see http://www.hp.com/go/upd Memory, standard 256 MB NAND Flash, 512 MB DRAM Memory, maximum 256 MB NAND Flash, 512 MB DRAM Printer management HP Printer Assistant; HP Utility (Mac); HP Device Toolbox; HP Web JetAdmin Software; HP JetAdvantage Security Manager; HP SNMP Proxy Agent; HP WS Pro Proxy Agent; Printer Administrator Resource Kit for HP Universal Print Driver (Driver Configuration Utility - Driver Deployment Utility - Managed Printing Administrator) Supported network protocols TCP/IP, IPv4, IPv6; Print: TCP-IP port 9100 Direct Mode, LPD (raw queue support only), Web Services Printing, HP ePrint, Apple AirPrint™, Google Cloud Print 2.0, Mopria, IPP Print; Discovery: SLP, Bonjour, Web Services Discovery; IP Config: IPv4 (BootP, DHCP, AutoIP, Manual), IPv6 (Stateless Link-Local and via Router, Statefull via DHCPv6), SSL Security and Certificate management; Management: SNMPv1, SNMPv2, SNMPv3, HTTP/HTTPS, Syslog, FTP FW Download Paper handling input, standard 50-sheet multipurpose tray, 250-sheet input tray Paper handling output, standard 150-sheet output bin Duplex printing Automatic (default) Media sizes supported Tray 1, Tray 2: A4; A5; A6; B5 (JIS); B6 (JIS); 16K (195 x 270 mm, 184 x 260 mm, 197 x 273 mm); 10 x 15 cm; Oficio (216 x 340 mm); postcards (JIS single, JIS double); envelopes (DL, C5, B5); Optional Tray 3: A4; A5; A6; B5 (JIS); B6 (JIS); 16K (195 x 270 mm, 184 x 260 mm, 197 x 273 mm); 10 x 15 cm; Oficio (216 x 340 mm); postcards (JIS single, JIS double); Automatic duplexer: A4; B5; 16K (195 x 270 mm, 184 x 260 mm; 197 x 273 mm); Oficio (216 x 340 mm) Media sizes, custom Tray 1: 3 x 5 to 8.5 x 14 in; Tray 2, optional Tray 3: 3.94 x 5.83 to 8.5 x 14 in Media types Paper (bond, brochure, colored, glossy, letterhead, photo, plain, preprinted, prepunched, recycled, rough), postcards, labels, envelopes Supported media weight Tray 1: 16 to 47 lb bond (up to 52 lb with HP Color laser glossy photo papers); Tray 2: 16 to 43 lb bond (up to 47 lb with postcards, up to 52 lb with HP Color laser glossy photo papers); optional Tray 3: 16 to 43 lb bond (up to 47 lb with postcards, up to 40 lb with HP Color laser glossy photo papers); Automatic duplexer: 16 to 43 lb Media weights by paper path Tray 1: 60 to 176 g/m² (up to 200 g/m² with postcards and HP Color laser glossy photo papers); Tray 2: 60 to 163 g/m² (up to 176 g/m² with postcards, up to 200 g/m² HP Color laser glossy photo papers): optional Tray 3: 60 to 163 g/m² (up to 176 g/m² with postcards, up to 150 g/m² Glossy media); Automatic duplexer: 60 to 163 g/m² Power 110-volt input voltage: 110 to 127 VAC (+/- 10%), 60 Hz (+/- 3 Hz); 220-volt input voltage: 220 to 240 VAC (+/- 10%), 50/60Hz (+/- 3 Hz) (Not dual voltage, power supply varies by part number with # Option code identifier) Print speed, black (normal) Up to 28 ppm Power consumption 550 watts (active printing), 17 watts (ready), 0.9 watts (sleep), 0.9 watts (HP auto-off/auto-on), 0.07 watts (auto-off/manual-on), 0.07 watts (off) Energy efficiency ENERGY STAR® qualified; EPEAT® Silver; CECP Operating temperature range 50 to 90.5°F Operating humidity range 30 to 70% RH (non-condensing) Dimensions (W X D X H) 16.2 x 18.5 x 11.6 in Dimensions Maximum (W X D X H) 16.2 x 25.6 x 11.6 in Print speed, color (normal) Up to 28 ppm Cable included Yes, 1 USB cable (AP only); No, please purchase USB cable separately (Americas, EMEA) FCC FCC Class A emissions - for use in commercial environments, not residential environments