Power ethernet

Ethernet IP network uav data video transceiver with RJ45, RS232, RS422, RS485 uav data video transceiver (SG-2400NB) for data communication equipment, with TDD-COFDM two way data communication Wireless network transceiver is newly designed and with AES data encryption and excellent data safety. UAV transceiver uses the advanced data processing technology and leading division COFDM modulation. Drone transceiver has encrypted network data transfer channel and is linked to DTE DCE and used in UAV and military. uav data video transceiver achieves real-time live broadcast, anti-multipath, high-speed mobile data, voice and image duplex module transmission. Model No.: SG-2400NB Ethernet: 10/100BaseT,Auto-MDI/X,IEEE802.3 TCP,UDP,TCP/IP,TFTP,ARP,ICMP,DHCP,HTTP,SNMP,FTP,DNS Power supply: DC7V~17V,6W consumption Output frequency: 2405~2470MHz(adjustable) Output RF power: 100 to 1000MHz Bandwidth: 4MHz / 8MHZ Interface: RJ-45 ethernet; RS232 RS485 RS422 data Resolution: Support 720P and 1080@50/60hz 30 frames Encryption: 128bit AES or 256 bits AES LOS: 8km - 10km NLOS: 1km -2km Characteristics: portable, mini, mobile radio AES Encryption: 128bit or 256 bit encrypted Transmission: two way signal, audio,video and data

· Power supply: 9V DC · Cable type: RJ11 & RJ45 LAN cable. · Connectors: Ethernet Cat 5, 5e, Cat 6, Cat 7, RJ11 6P & RJ45 8P.

D-Link DGS-108 8-Port Gigabit Ethernet Switch The DGS-108 8-Port Gigabit Ethernet Switch from D-Link provides eight speedy Gigabit Ethernet auto-sensing ports for connecting multiple computer devices to your network. Once you've connected the switch to your network via one Gigabit Ethernet port, you will have seven other ports for connecting printers, scanners, storage, backup devices, and more. Support for Quality of Service (QoS) means the switch will prioritize network traffic that is sensitive to lags, such as video streaming or VoIP calls. The switch is unmanaged and plug-and-play, so you need not install software first to use it or configure settings for it later. Plus, the diagnostic LEDs on the front panel let you know if there are any connection issues, helping you troubleshoot problems as they arise. Built-in D-Link Green Technology Rugged metal housing Inexpensive Gigabit solution for small and medium business A total of eight Gigabit Ethernet ports 16Gbps switching fabric Auto MDI/MDIX crossover for all ports Secure store-and-forward switching scheme Full/half-duplex for Ethernet/Fast Ethernet speeds IEEE 802.3x Flow Control Supports Jumbo Frames With support for IEEE 802.1p Quality of Service, the switch organizes and prioritizes time-sensitive and important data for efficient delivery, allowing for smooth media streaming and VoIP calling The D-Link Cable Diagnostics Function enables users to be instantly aware of cable conditions through the LED display on the front-panel The switch can also save energy by detecting the cable length and using only as much power as necessary As a switch supporting IEEE 802.3az Energy-Efficient Ethernet (EEE), the switch can detect when a connected computer is shut down or when there is no Ethernet traffic, at which time the switch will automatically power down the idle port, saving a substantial amount of power Specs Ports 8 x 10/100/1000 Mb/s Gigabit Ethernet (RJ45) Protocols Queuing Strict Priority Transmission Method Store-and-Forward Jumbo Frames Support 9,000 Bytes MAC Address Table Size 8K Security Security Features Kensington Lock Support Standards Supported IEEE Standards 802.1p, 802.3, 802.3 N, 802.3ab, 802.3az, 802.3u, 802.3x Performance Switching Bandwidth 16 Gb/s  Priority Queues 4 Computer RAM Buffer 128 KB per Device Electrical Power Draw 4.5 W (Active) 1.0 W (Idle) DC Input Power 5 VDC at 1 A Environmental Operating Temperature 32 to 130°F / 0 to 50°C Operating Humidity 10 to 90% Storage Temperature -14 to 158°F / -26 to 70°C Storage Humidity 5 to 90% General Mean Time Between Failures (MTBF) 2,053,751 Hours Dimensions 6.3 x 4 x 1.1" / 16.2 x 10.2 x 2.8 cm Weight 1 lb / 0 kg

Description: Details iShopping.pk brings you the best price for Netgear Powerline AC1200 Gigabit Ethernet Network Adapter Pack Of 2 White (PLP1200100PAS) with express shipping all over Pakistan.    Netgear Powerline AC1200 Gigabit Ethernet Network Adapter with Extra Power Outlet Pack Of 2 White (PLP1200100PAS)   Specifications: Powerline Technology Homeplug AV2 compliant Powerline Performance 1200 Mbps † WiFi Performance Not applicable Number of Ethernet ports One (1) 10/100/1000Mbps† Gigabit Ethernet port on each adapter Key Features 1200Mbps powerline speed Extra noise filtered power outlet Perfect for connecting smart TVs, streaming players & game consoles Ideal for 4K HD streaming & lag-free gaming Add up to 16 adapters to expand your network & lag-free gaming Extra outlet provides convenience & lag-free gaming Pick-a-plug LED for highest possible performance Sets up in minutes, no need to install software Secures the network connection with the touch of a button Energy saving -- powers down when not connected Security Not applicable Physical Specifications Dimensions: 120 x 58 x 42 mm (4.72 x 2.28 x 1.65 in) Weight: 183 g (0.40 lb) Standards One (1) 10/100/1000Mbps† Gigabit Ethernet port on each adapter HomePlug® AV2 compliant Works with HomePlug AV and HomePlug Green PHY IEEE® 1901 compliant IEEE® 802.3 compliant Typical coverage up to 500m² (5382ft²)†   Features: Faster Speeds Extremely fast speed - up to 1.2Gbps. Latest Technology Gigabit speeds through your electrical outlets for improved coverage. Wide Coverage Multiple data streams (MIMO) with beamforming technology offer improved coverage throughout the home. Easy Set-Up Setup in minutes, no need to configure or install software. Energy-saving Automatically powers down when not in use. Push-and-Secure Encrypts powerline network connections with the touch of a button. Noise-filtered power outlet Provide an extra outlet and improves the overall Powerline network performance. Software-free installation So you can be up and running in no time. Reliable and Expandable Network Connect multiple adapters(up to 16) to expand your gigabit wired or WiFi network reliably.

Name: wireless transmitter, wireless bridge, wireless transceiver, network transceiver, Ethernet transceiver, IP transceiver, data transceiver Type: audio video data transceiver, RF transceiver, digital AV transceiver, audio video wireless bridge Application: used in the UAV/UAS/Quadcopter/Octocopter/ hexacopter high-speed moving transmission in complex environments. Details: Data: RS232 RS422, RS485 Ethernet/IP/network: RJ45 HD interface:HDMI Frequency: 2.4GHz Distance: 1-10km Modulation: COFDM/TDD-COFDM Mode: TDD, full duplex, two way data Transmission: audio, video, data, two-way, P2P (point-to-point), p2mp (point to multipoint), LOS (line of sight), NLOS (non line of sight), mobile Features: 1. Military-grade digital zero delay(around 10ms) HDMI ethernet transceiver 2. TDD duplex mode 3. Excellent sensibility 4. High RF output power 5. Well safety performance 6. Point to point and point to multi-point transmission 7. Remote control 8. Good diffraction ability 9. Wide coverage 10. High transfer rate 11. Strong anti-interference and anti-fading ability 12. Transparent protocol 13. Confidentiality 14. Proprietary data scrambling encryption Model COFDM AW (Sold by set including transmitter and receiver) Power Supply DC7V-17V Consumption 9W Video in/out HDMI, RJ45 Ethernet, support 1080P, 720P, 576, 480 Note: HDMI for transmitting end, RJ45 for receiving end Data in/out Standard RS232/RS485/RS422 Frequency Output 2405MHz-2470MHz, step in 1MHz (other frequencies can be customized) RF power output 20dBm-30dBm (100mW-1000mW) (adjustable) Working bandwidth 4MHz/8MHz Encryption 128 bit AES, and user-defined password Error correction mechanism 32 bit of CRC、ARQ Modulation TDD-COFDM、time division duplex mode Parameter Control adjustable parameters through the OLED panel Working temperature -20℃-75℃ Dimension 85mm*28mm*51mm Weight 151g

TP-LINK TL-PS110P Single Parallel Port Fast Ethernet Print Server Price in Pakistan HARDWARE FEATURES Interface Parallel Port Fast Ethernet RJ-45 Port Power Consumption 3.3V DC, 2A LED Indicator Status, 10Mbps, 100Mbps Dimensions (W x D x H) 59×52×22mm SOFTWARE FEATURES Management Web Management, Telnet Configuration, HP Web Jet Admin Protocols TCP/IP,(Remote Virtual USB),LPR/LPD/RAW Advanced Features DHCP Client, POST(Power On Self Test), Firmware Upgradable, Windows-Based Utility OTHERS Package Contents Print Server Ethernet cable (RJ45) Resource CD Quick Installation Guide Power supply unit System Requirements Windows 9x/ME, Windows NT/2000/XP/Vista/7/10, Mac OS 8.1 or Later, UNIX/Linux, Netware 3.12 or Later Environment Operating Temperature: 0?~50? (32?~122?) Storage Temperature: -5?~65? (23?~139?) Operating Humidity: 0%~70% non-condensing Storage Humidity: 0%~80% non-condensing

DESCRIPTION USB Ethernet Adapter Ugreen USB 3.0 male A to RJ45 female ethernet adapter connects your computer or tablet to a router,modem or network switch for network connection. It adds a standard RJ45 port to your Ultrabook, notebook or Macbook Air for file transferring, video conferencing, gaming, and HD video streaming. Protect or Replace a Broken Ethernet Port USB 3.0 to Gigabit Ethernet Adapter is a good accessory to protect the RJ45 Lan port in your expensive computer, or replace a broken Ethernet port. Speed up to 5Gbps Full 10/100/1000Mbps gigabit ethernet performance over USB 3.0’s 5Gbps bus, faster and more reliable than most wireless connections. Link and Activity LEDs. USB powered, no external power required. Backward compatible with USB 2.0/1.1. Mini Portable UGREEN USB rj45 adapter is mini and portable, perfect to take on the go. Wide Compatibility This USB RJ45 adapter work with Windows 8.1/8/7/Vista/XP, Mac OSX 10.6/10.7/10.8/10.9/10.10/10.11/10.12, Linux kernel 3. x/2.6, and Chrome OS. DO NOT SUPPORT Windows RT and Android. Compatible with IEEE 802.3, IEEE 802.3u and IEEE 802.3ab. Supports IEEE 802.3az (Energy Efficient Ethernet). Block E House 97, PIA Housing Society, Lahore, Punjab, Pakistan

Product Name:POE Injector / Splitter Data PIN:1/2,3/6 Power PIN:4/5+ & 7/8- Data in:Connects PC/HUB/Switch Dimensions:50mm*25mm*25mm Case of material:ABS 94V-0 Ethernet Data rate:10/100/1000 Mbp Ethernet Cable:TIA/EIA 568 Cat.5 Ethernet Cable Connector:RJ-45 Operating Temperature:0- 40 Degree Storage Temperature:-40-70 Degree Operating Humidity:10%to80% RH Storage Humidity:5%to90% RH

TP-LINK MC220L Gigabit Ethernet Media Converter Price in Pakistan MEDIA CONVERTER & MODULE Standards and Protocols IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x Basic Function Full Duplex Flow Control (IEEE 802.3x) Extends fiber distance up to 0.5km for multi-mode fiber or up to 10km with single-mode fiber Ports 1 x Gigabit SFP port 1 x 10/100/1000M RJ45 port (Auto MDI/MDIX) Wave Length Depends on the used SFP module Network Media 1000BASE-X Multi-mode/Single-mode SFP module Network Media 1000BASE-T UTP category 5, 5e, 6 cable (maxium 100m) EIA/TIA-568 100O STP (maximum 100m) LED Indicators PWR, Link/Act Dimensions (W*D*H) 3.7 x 2.9 x 1.1 in. (94 x 73 x 27 mm) Power Supply External Power Adapter (9VDC/ 0.6A) Max Power Consumption 1.7 W Safety & Emission FCC, CE, RoHS Package Contents • Media Converter MC220L • Power Adapter • Installation Guide Environment Operating Temperature: 0?~40? (32?~104?) Storage Temperature: -40?~70? (-40?~158?) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing

Description: Details iShopping.pk brings you the best price for TP-Link Gigabit Ethernet Media Converter (MC220L) with 18 months official warranty and express shipping all over Pakistan.   Specification: MEDIA CONVERTER & MODULE Standards and Protocols IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x Basic Function Full Duplex Flow Control (IEEE 802.3x) Extends fiber distance up to 0.5km for multi-mode fiber or up to 10km with single-mode fiber Ports 1 x Gigabit SFP port 1 x 10/100/1000M RJ45 port (Auto MDI/MDIX) Wave Length Depends on the used SFP module Network Media 1000BASE-X Multi-mode/Single-mode SFP module Network Media 1000BASE-T UTP category 5, 5e, 6 cable (maxium 100m) EIA/TIA-568 100Ω STP (maximum 100m) LED Indicators PWR, Link/Act Dimensions (W*D*H) 3.7 x 2.9 x 1.1 in. (94 x 73 x 27 mm) Power Supply External Power Adapter Max Power Consumption 1.7 W Safety & Emission FCC, CE, RoHS Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing   What This Product Does The MC220L is a media converter designed to convert 1000BASE-SX/LX fiber to 10/100/1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T standards, the MC220L communicates with any TP-Link standard gigabit SFP fiber module.

Description: Details iShopping.pk brings you the best price for TP-Link Gigabit Ethernet Media Converter (MC220L) with express shipping all over Pakistan.   Specification: MEDIA CONVERTER & MODULE Standards and Protocols IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x Basic Function Full Duplex Flow Control (IEEE 802.3x) Extends fiber distance up to 0.5km for multi-mode fiber or up to 10km with single-mode fiber Ports 1 x Gigabit SFP port 1 x 10/100/1000M RJ45 port (Auto MDI/MDIX) Wave Length Depends on the used SFP module Network Media 1000BASE-X Multi-mode/Single-mode SFP module Network Media 1000BASE-T UTP category 5, 5e, 6 cable (maxium 100m) EIA/TIA-568 100Ω STP (maximum 100m) LED Indicators PWR, Link/Act Dimensions (W*D*H) 3.7 x 2.9 x 1.1 in. (94 x 73 x 27 mm) Power Supply External Power Adapter Max Power Consumption 1.7 W Safety & Emission FCC, CE, RoHS Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing   What This Product Does The MC220L is a media converter designed to convert 1000BASE-SX/LX fiber to 10/100/1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T standards, the MC220L communicates with any TP-Link standard gigabit SFP fiber module.

Description: Details iShopping.pk brings you the best price for Revolabs Power Over Ethernet Injector Kit with express shipping all over Pakistan.   Specifications: Packaging Info Package Weight 1.0 lb Box Dimensions (LxWxH) 6.5 x 6.5 x 6.3"

Description: Details iShopping.pk brings you the best price for TP-Link 300Mbps High Power Wireless N Router (TL-WR841HP) with express shipping all over Pakistan.   Features: • High power amplifier and two detachable external 9dBi high gain antennas provide superior wireless range •  Enhanced Wi-Fi signal cuts through walls and obstacles, eliminating dead zones •  Excellent wireless speed over long distance brings a more enjoyable experience for your whole-home network access •  300Mbps wireless speed ideal for video streaming, online gaming and VoIP   Specifications: HARDWARE FEATURES Interface 4 10/100Mbps LAN Ports 1 10/100Mbps WAN Port Button WPS/Reset Button Antenna 2*9dBi Detachable Omni  Directional Antenna (RP-SMA) External Power Supply 12VDC / 1A Wireless Standards IEEE 802.11n, IEEE 802.11g, IEEE 802.11b Dimensions (W x D x H) 6.6in.x5.1in.x1.2in.(168.5mmx13 0mmx31.5mm) WIRELESS FEATURES Frequency 2.4-2.4835GHz Signal Rate 11n: Up to 300M bps(dynamic) 11g: Up to 54Mbps(dynamic) 11b: Up to 11Mbps(dynamic) Reception Sensitivity 270M: -71dBm@10% PER 130M: -74dBm@10% PER 108M: -74dBm@10% PER 54M: -77dBm@10% PER 11M: -91dBm@8% PER 6M: -89dBm@10% PER 1M: -97dBm@8% PER Transmit Power CE: FCC: Wireless Functions Enable/Disable Wireless Radio, WDS Bridge, WMM, Wireless Statistics Wireless 64/128/152-bit WEP / WPA / WPA2,WPA-PSK / WPA2-PSK SOFTWARE FEATURES Quality of Service WMM, Bandwidth Control WAN Type Dynamic IP/Static IP/PPPoE/ PPTP/L2TP/BigPond Management Access Control Local Management Remote Management DHCP Server, Client, DHCP Client List, Address Reservation Port Forwarding Virtual Server,Port Triggering, UPnP, DMZ Dynamic DNS DynDns, Comexe, NO-IP VPN Pass-Through PPTP, L2TP, IPSec (ESP Head) Access Control Parental Control, Local Management Control, Host List, Access Schedule, Rule Management Firewall Security DoS, SPI Firewall IP Address Filter/MAC Address F ilter/Domain Filter IP and MAC Address Binding OTHERS Certification CE, FCC, RoHS Package Contents 300Mbps Wireless N High Power Router Power supply unit Resource CD Ethernet Cable Quick Installation Guide System Requirements Microsoft® Windows® 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows8/ 8.1/10 MAC® OS, NetWare®, UNIX® or Linux Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing   Designed to be Powerful The TL-WR841HP uses independent high power amplifiers and high gain antennas to provide a superior wireless experience.   High Gain External Antennas High gain antennas boost the reception and sensitivity of the router to create stronger connections over greater distances. This allows the router signal to travel farther and provide stable Internet access for all of your most important connected devices.   Independent High Power Amplifiers Independent high power amplifiers provide significantly increased output power of up to 1000mw* 1, which is up to 5x transmission power, when compared to a normal router. This ensures that your wireless signal is strong enough to penetrate walls and other obstacles.   Superior Range – Up to 10,000* 2  Square Feet With its upgraded hardware, the TL-WR841HP easily outperforms standard routers, providing dramatically expanded wireless coverage and connections that are significantly more reliable. You can enjoy high speed Wi-Fi in every part of your home, in your garage, and even in the backyard.   Wall-Penetrating Wi-Fi The signal from the TL-WR841HP can remain strong, even after it has passed through walls and barriers. This helps to eliminate Wi-Fi dead spots and ensures that your wireless signal will remain stable over longer distances. Now you can enjoy reliable Wi-Fi in even more places.   More than a Router In addition to serving as a wireless router, the TL-WR841HP can also function as a range extender or wireless access point, providing you with the flexibility you need in any situation.   Easy Setup and Management The intuitive web interface and powerful Tether app allow you to set up the routers in minutes. Tether also lets you manage your network settings, including parental controls and access control policies, using any Android or iOS device.  

Features: Passive PoE- means that input and output voltage are equal. Transforms Non PoE devices to PoE enabled. Supports 5V, 12V, 24V, 48V. Power supply required for power input - simply use the power supply (wall transformer) that is provided with the device you are trying to power. PoE injector and splitter kit with 5.5 * 2.1 mm DC jack / plug. Use with IP security camera, wireless access point and other devices. Can work up to30-40 metres/100-130ft (depending on the quality of the cable and the power draw of the device). Specifications: Color: Black, White(Optional) Material: Plastic Injector: RJ45 Male + Power In to RJ45 Female Splitter: RJ45 Female to RJ45 Male + Power Out Supports: 5V, 12V, 24V, 48V Power plug / jack: 2.1 * 5.5mm / 0.9 * 2.2in Power Pins: 4,5 + and 7,8 Length:18cm / 6.9in Transmission distance: 30-40 m / 100-130 ft Application: WLAN, routers, switches, internet telephony, security monitoring etc Product size: 17.5 * 1.9 * 1.8cm / 6.8 * 0.7 * 0.7in Product weight: 53g / 1.86oz Package size: 22.3 * 9 * 2.2cm / 8.8 * 3.5 * 0.9in Package weight: 54g / 1.9oz

USB to LAN 2.0 Fast Ethernet USB 2.0 Performance Connect To A 10/100Mbps Network From A USB Enabled Desktop Or Notebook No External Power Adapter Is Required Supports Windows 2000/XP/Vista/7/8/8.1, Linux And Mac OS X 10.X

Highlights: Item type: Cable Color: White Weight: approx. 27g Supports 10/100/1000 Mbps auto sensing, full duplex and half duplex Ethernet, cross detection, auto correction (Auto MDIX). Support IPv4 / IPv6 protocol and 10 BASE-T, 100 BASE-TX and 1000 BASE-T network. Interface Type: USB 3.0, RJ45 System Support: Windows XP/Vista/7/8,MAC OS 9.x/10.x,linux Transmission speed:10 /100 / 1000Mbps Description: Type-C port supports reverse plug. 3A Current output, USB PD function brings 100W power. USB3.1 standard 10Gbps data speed. Great EMI resistance. Downwardly supports USB2.0/3.0/PD. Both-way 20Gbps high speed data transfer. Suitable for communication, digital devices, multimedia, home appliance, etc. What’s in the box: 1 x RJ45 Network Cable Port to Type-C Adapter

Description: Details iShopping.pk brings you the best price for Mercusys 300Mbps High Power Wireless N Router (MW330HP) with express shipping all over Pakistan.   Features: • 300Mbps wireless speed – ideal for fast video streaming, online gaming and file downloads • Turbo button – instantly enhances the Wi-Fi signal and expands wireless coverage • PA chip – provides up to 2x transmission power, strong enough to penetrate walls and other obstacles • High gain 7dBi antennas – strongly boosts wireless range and coverage • Easy installation – intuitive webpage guides you through the setup process in minutes   Specifications: Dimensions (W X D X H) 192mm_127mm_36mm External Power Supply 9V/0.6A Antenna Type 3 * 7dBi Signal Rate 11n: Up to 300Mbps (Dynamic) 11g: Up to 54Mbps (Dynamic) 11b: Up to 11Mbps (Dynamic) Button TURBO, WPS/RESET Wireless Standards IEEE 802.11b/g/n Frequency 2.402-2.482GHz Reception Sensitivity 270M: -74dBm@10% PER_ 130M: -76dBm@10% PER_ 54M: -78dBm@10% PER 11M: -90dBm@10% PER 6 M: -94dBm@10% PER 1 M: -96dBm@10% PER Interfaces 3*10/100Mbps LAN Ports 1*10/100Mbps WAN Port Package Contents 300Mbps High Power Wireless N Router (MW330HP) Power Adapter Quick Installation Guide Ethernet Cable Environment Operating Temperature: 0_C~40_C (32_F~104_F) Storage Temperature: -40_C~70_C (-40_F~158_F) Operating Humidity: 10%~90% Non-Condensing Storage Humidity: 5%~90% Non-Condensing Transmission Power Wireless Security WPA-PSK / WPA2-PSK Wireless Functions Enable/Disable Wireless Radio, WDS Bridging WAN Type Dynamic IP/Static IP/PPPoE/PPTP/L2TP Management Access Control Local Management Remote Management DHCP Server Port Forwarding Virtual Server, UPnP, DMZ Firewall Security IP and MAC Address Binding Guest Network 2.4GHz Guest Network

Description: Details iShopping.pk brings you the best price for Shure Central Control Unit With Power Supply Kit with express shipping all over Pakistan.   The Central Control Unit for DDS 5900 and DCS 6000 Conference Systems from Shure powers up to 60 microphone units and supports up to 250 units. It supports 2 languages and 32 interpreters and can be used in various speech-application environments such as hotel/conference centers, multi-purpose/training rooms, education facilities, corporate/board rooms, courtrooms, and more. Featuring two analog audio inputs for external sources, the Central Control Unit has eight analog audio outputs for connections to videoconferencing systems, A/V recording equipment, supplemental sound reinforcement systems, or wireless language distributions system. In addition, with Feature License FL6000 (sold separately), the DIS-CCU can be used with DCS 6000-series microphone units serving up to 250 participants and 4 languages. Additional Feature Licenses enable support for up to 3,800 participants, 200 interpreters, and 31 languages. • Fully digital audio transmission of floor plus 31 interpretation channels and 8 conference microphone audio channels in a single digital-bus cable structure using shielded CAT5e cables • OLED display on the front enables the user to setup basic system configurations in terms of maximum number of speakers/requests, microphone operation mode, etc. • TCP/IP Ethernet connection for web browser control, integration with optional SW 6000 software suite, or third party external control system (AMX, Crestron, etc.) • 2 analog audio inputs and 8 analog audio outputs for distribution of audio from eight groups of units, the floor channel, or the interpreter channels. • Connection for Emergency Evacuation Message (EEM) is available using 'Audio In 2' and a contact closure switch • Powers up to 60 units without additional power supply (depending on unit type)   Features: • Central Control Unit and Microprocessor • Power Supply for Central Control Unit • For DDS 5900 & DCS 6000 Systems • 4 Modes: Auto, FIFI, VOX, and Manual • 3 Microphone Interrupt Modes • 2 Analog Audio Inputs • Up to 8 Microphones Open at One Time • Scrambles Audio to Avoid Evesdropping • Auto Off of Conference Units   Specifications: System Performance Max Number of Discussion Units For DDS 5900: 250 Powered by CU 5905: 60 Microphones Max Number Open: 8 Languages Interpreter Channels: 2 Max Number of Interpreter Units: 32 Network LAN DCS-LAN Outputs: 4 x RJ45 female sockets TCP/IP 1 x RJ45 female socket Audio Inputs Analog Input 1: 1 x 3-pin female XLR socket (electronically balanced) Analog Input 2 EEM: 1 x 3-pin female XLR socket (electronically balanced) with contact closure Input Level Max: +15 dBm (4.5 Vrms) Input Impedance 50 to 100 kOhms Audio Output 8 x 3-pin XLR (electronically balanced) Maximum load: >1 kOhms Maximum Load >1 kOhms Nominal Output Levels 0 dBm at nominal input Maximum Output Level 4.9 Vrms ~ +16 dBm Electrical Power Consumption 22 W/48 V (150 W max.) Supply Voltage For Microphone Units: 122 W/48 V Sampling Frequency 24-bit/32 kHz Total Harmonic Distortion (THD) Signal to Noise Ratio >85 dBA Mechanical Mounting Tabletop, standard 19" rack. Storage Temperature Range -4 to 140°F (-20 to 60°C) Operating Temperature Range 41 to 104°F (5 to 40°C) Humidity 10 to 80% Dimensions (H x W x D) 1.75 x 16.8 x 7.2" (44.4 x 426 x 186 mm) Weight 6.17 lb (2.8 kg)  

Description: Details iShopping.pk brings you the best price for TP-Link 2.4GHz 300Mbps 9dBi Outdoor CPE (CPE210) with express shipping all over Pakistan.   Features: • Built-in 9dBi 2x2 dual-polarized directional MIMO antenna •  Adjustable transmission power from 0 to 27dBm/500mw •  System-level optimizations for more than 5km long range wireless transmission •  TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications •  Centralized Management System – Pharos Control •  AP / Client / Bridge / Repeater / AP Router / AP Client Router (WISP) operation modes •  Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely • Outdoor stabilized enclosure with IPX5 waterproof certification • Dual Ethernet ports and grounding terminal integrated • 6KV Lightning Protection, 15KV ESD Protection • Provides WEP, WPA/WPA2, WPA-PSK/WPA2-PSK data security • Selectable bandwidth of 5/10/20/40MHz • Provides Throughput Monitor, Spectrum Analyzer, Speed Test and Ping tools • Easy antenna alignment with wireless signal quality indicators via Web interface   Specification: HARDWARE Processor Qualcomm Atheros 560MHz CPU, MIPS 74Kc Memory 64MB DDR2 RAM, 8MB Flash Interface 1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in) 1 10/100Mbps Shielded Ethernet Port (LAN1, Passive PoE Passthrough) 1 Grounding Terminal 1 Reset Button Power Supply Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins) Voltage range: 16-27VDC Power Consumption 10.5 Watts Max Note: When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable. Dimensions (W x D x H) 224 x 79 x 60 mm Antenna Type Built-in 9dBi 2x2 Dual-polarized Directional Antenna Beam Width: 65° (H-Plane) / 35° (E-Plane) Note: For more details, please refer to datasheet Protection 15KV ESD Protection 6KV Lightning Protection Enclosure Outdoor ASA stabilized plastic material IPX5 waterproof Certification WIRELESS  Wireless Standards IEEE 802.11b/g/n (with Pharos MAXtream disabled) Proprietary Protocol TDMA Mode (with Pharos MAXtream enabled) Wireless Speeds Up to 300Mbps (40MHz,Dynamic) Up to 144.4Mbps (20MHz,Dynamic) Up to 72.2Mbps (10MHz,Dynamic) Up to 36.1Mbps (5MHz,Dynamic) Frequency 2.4~2.483GHz Note: Available operating frequency may vary depending on the limitations of the countries or regions in which the device is used. Transmission Power 27dBm/500mw (Adjustable power by 1dBm) Note: Maximum transmission power may vary across different channels depending on the limitations of the countries or regions in which the device is used. SOFTWARE Wireless Configurations Pharos MAXtream TDMA Technology 802.11b/g/n Modes Selectable Channel Width: 5/10/20/40MHz Automatic Channel Selection Transmission Power Control Dynamic Frequency Selection (DFS) WDS Enable/Disable Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption SSID Broadcast Enable/Disable Multi-SSID with VLAN Tagging (AP mode only) Distance/ACK Timeout Setting Wireless MAC Address Filter Wireless Advanced: > Beacon Interval/RTS Threshold/Fragmentation >Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia Management Discovery and Remote Management via Pharos Control application HTTP/HTTPS Web-based management System Log SNMP Agent(v2c) Ping Watch Dog Dynamic DDNS SSH Server System Tools Wireless Signal Quality Indicators: Signal Strength/Noise/Transmit CCQ/CPU/Memory Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP Spectrum Analyzer Speed Test Ping Traceroute System-level Optimizations Optimized IGMP Snooping/Proxy for multicast applications Hardware watch dog POE ADAPTER Dimensions(W x D x H) 110*57*33.5mm Input Current 0.8A Max @ 100VAC Input Voltage 100VA~240VAC @ 50Hz~60Hz Output 24VDC, 1.0A Max +4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet) Efficiency >80% Output Voltage 24VDC(+4,5pins; -7,8pins) Input 100-240VAC, 50/60Hz Power Status LEDs 0~0.8A: Green 0.8A~1.0A: Red Certifications CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark Interfaces 1 AC Jack with Earth Ground 1 10/100/1000Mbps Shielded Ethernet Port (Power + Data) 1 10/100/1000Mbps Shielded Ethernet Port (Data) Button Remote Reset Button OTHERS Certification CE, FCC, RoHS, IPX5 System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux. Note: We recommend you to use one of following Web browsers for an improved user experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended. Environment Operating Temperature: -30°C~70°C (-22℉~158℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~95% non-condensing   TP-LINK’s 2.4GHz 300Mbps 9dBi Outdoor CPE, the CPE210 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications.  Professional performance, coupled with user-friendly design, makes CPE210 an ideal choice for both business and home users.     Enterprise Hardware With Qualcomm Atheros enterprise level chipsets, high gain antennas and high quality material, specially designed enclosure, and PoE power supply, CPE210 is specially designed for outdoor use and can operate flawlessly in almost any climate, with operating temperatures ranging from -40℃ (-40℉) to +70 ℃ (158℉).   Advanced Antenna System Built-in High Gain Dual-Polarized Antenna  Dedicated metal reflector ensures higher gain  and lower noise interference   5km+ Wireless Data Transmission Specially designed for outdoor uses, ideal for long distance wireless data transmis sion over 5km+, tested in the field.     TP-LINK MAXtream TDMA Technology As network scale increases, wireless competition and collisions among CPEs and base stations will be so enormous that the real throughput of the network will drop, resulting in a serious impact on end-user experience. To mitigate these effects, the CPE210 uses MAXtream TDMA Technology.   Pharos Control – Centralized Management System CPE210 also comes equipped with centralized management software that helps users easily manage all the devices in their network from a single PC - Pharos Control. Functions like device discovery, status monitoring, firmware upgrading, and network maintenance can be managed using Pharos Control.   PharOS User-friendly web-based management system allows professionals to do more specific configurations.

Description: Details iShopping.pk brings you the best price for TP-Link 5GHz 300Mbps 13dBi Outdoor Access Point (CPE510) with express shipping all over Pakistan.   PharOS User-friendly web-based management system allows professionals to do more specific configurations.   5GHz 300Mbps 13dBi Outdoor CPE  CPE510 • Built-in 13dBi Dual-polarized • Directional Antenna • AP / Client / Repeater / AP Router / AP Client Router (WISP) operation modes • 6KV Lightning Protection • Weather Proof Enclosure • 15KV ESD Protection • Passive PoE Adapter   Specification: HARDWARE FEATURES Processor Qualcomm Atheros Enterprise 560MHz CPU, MIPS 74Kc Memory 64MB DDR2 RAM, 8MB Flash Interface 1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in) 1 10/100Mbps Shielded Ethernet Port (LAN1, Passive PoE Passthrough) 1 Grounding Terminal 1 Reset Button Power Supply Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins) Voltage range: 16-27VDC Power Consumption 10.5 Watts Max Note: When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable. Dimensions (W x D x H) 224 x 79 x 60 mm Antenna Type Built-in 13dBi 2x2 Dual-polarized Directional Antenna Beam Width: 45° (H-Plane) / 30° (E-Plane) Protection 15KV ESD Protection 6KV Lightning Protection Enclosure Outdoor ASA stabilized plastic material IPX5 waterproof Certification WIRELESS FEATURES Wireless Standards IEEE 802.11a/n (with Pharos MAXtream disabled) Proprietary Protocol TDMA Mode (with Pharos MAXtream enabled) Wireless Speeds Up to 300Mbps (40MHz,Dynamic) Up to 144.4Mbps (20MHz,Dynamic) Up to 72.2Mbps (10MHz,Dynamic) Up to 36.1Mbps (5MHz,Dynamic) Frequency 5.15~5.85GHz Note: Available operating frequency may vary depending on the limitations of the countries or regions in which the device is used. Transmission Power 23dBm/200mw (Adjustable power by 1dBm) Note: Maximum transmission power may vary across different channels depending on the limitations of the countries or regions in which the device is used. SOFTWARE FEATURES Wireless Configurations Pharos MAXtream TDMA Technology 802.11a/n Modes Selectable Channel Width: 5/10/20/40MHz Automatic Channel Selection Transmission Power Control Dynamic Frequency Selection (DFS) WDS Enable/Disable Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption SSID Broadcast Enable/Disable Multi-SSID with VLAN Tagging (AP mode only) Distance/ACK Timeout Setting Wireless MAC Address Filter Wireless Advanced: > Beacon Interval/RTS Threshold/Fragmentation >Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia Management Discovery and Remote Management via Pharos Control application HTTP/HTTPS Web-based management System Log SNMP Agent(v2c) Ping Watch Dog Dynamic DDNS SSH Server System Tools Wireless Signal Quality Indicators: Signal Strength/Noise/Transmit CCQ/CPU/Memory Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP Spectrum Analyzer Speed Test Ping Traceroute System-level Optimizations Optimized IGMP Snooping/Proxy for multicast applications Hardware watch dog POE ADAPTER FEATURES Dimensions(W x D x H) 110*57*33.5mm Input Current 0.8A Max @ 100VAC Input Voltage 100VA~240VAC @ 50Hz~60Hz Output 24VDC, 1.0A Max +4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet) Efficiency >80% Output Voltage 24VDC(+4,5pins; -7,8pins) Input 100-240VAC, 50/60Hz Power Status LEDs 0~0.8A: Green 0.8A~1.0A: Red Certifications CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark Interfaces 1 AC Jack with Earth Ground 1 10/100/1000Mbps Shielded Ethernet Port (Power + Data) 1 10/100/1000Mbps Shielded Ethernet Port (Data) Button Remote Reset Button OTHERS Certification CE, FCC, RoHS, IPX5 System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux. Note: We recommend you to use one of following Web browsers for an improved user experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended. Environment Operating Temperature: -30°C~70°C (-22℉~158℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~95% non-condensing   Features: • Built-in 13dBi 2x2 dual-polarized directional MIMO antenna • Adjustable transmission power from 0 to 23dBm/200mw • System-level optimization for more than 15km long range wireless transmission • TP-LINK Pharos MAXtream TDMA(Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency, ideal for PTMP applications • Centralized Management System – Pharos Control • AP / Client / Bridge / Repeater / AP Router / AP Client Router (WISP) operation modes • Outdoor stabilized enclosure with IPX5 waterproof certification • Dual Ethernet ports and grounding terminal integrated • 6KV Lightning Protection, 15KV ESD Protection • Passive PoE Adapter supports up to 60 meters (200 feet) power over Ethernet deployment and allows for device reset remotely • Provides WEP, WPA/WPA2, WPA-PSK/WPA2-PSK data security • Selectable bandwidth of 5/10/20/40MHz • Provides Throughput Monitor, Spectrum Analyzer, Speed Test and Ping tools • Easy antenna alignment with wireless signal quality indicators via Web interface   TP-LINK’s 5GHz 300Mbps 13dBi Outdoor CPE, the CPE510 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications.  Professional performance, coupled with user-friendly design, makes CPE510 an ideal choice for both business and home users.   Enterprise Hardware With Qualcomm Atheros enterprise level chipsets, high gain antennas and high quality material, specially designed enclosure, and PoE power supply, CPE510 is specially designed for outdoor use and can operate flawlessly in almost any climate, with operating temperatures ranging from -30℃ (-22℉) to +70 ℃ (158℉).   Advanced Antenna System Built-in High Gain Dual-Polarized Antenna Dedicated metal reflector ensures higher gain and lower noise interference   15km+ Wireless Data Transmission Specially designed for outdoor uses, ideal for long distance wireless data transmission, covering a range of 15km+, tested in the field.   TP-LINK MAXtream TDMA Technology As network scale increases, wireless competition and collisions among CPEs and base stations will be so enormous that the real throughput of the network will drop, resulting in a serious impact on end-user experience. To mitigate these effects, the CPE510 uses MAXtream TDMA Technology.   Pharos Control – Centralized Management System CPE510 also comes equipped with centralized management software that helps users easily manage all the devices in their network from a single PC - Pharos Control. Functions like device discovery, status monitoring, firmware upgrading, and network maintenance can be managed using Pharos Control.

Description: The DES-1008C 10/100 Mbps Unmanaged Switch is economical, plug-and-play networking switch solution for SOHO and small and medium businesses wanting to ports that enable you to easily expand your network and provide a quick way to upgrade your network to fast connectivity.   Fast Networking Made Easy With data transfer speeds of up to 200 Mbps at full duplex, this switch is ideal for quick file transfers, online gaming and smooth streaming media. It features easy-to-access Ethernet ports with LED indicators per port to easily distinguish link status. Auto MDI/MDIX crossover makes connection a cinch; just plug in your cables and you’re ready to go.   Conserve Energy The DES-1008C implements 802.3az Energy Efficient Ethernet, which saves energy and reduces heat automatically without sacrificing performance or functionality. The switch can detect when a connected computer is shut down or when there is no Ethernet traffic, and will put the port in standby mode, saving a substantial amount of power. In addition, the switch optimizes power usage for each port for the length of cable connected to it, using only as much power as is required. Both of these features work together to help you save power automatically.   Reliable Plug and Play Installation The DES-1008C is Plug-and-Play device that requires no configuration, so setup is simple and hassle-free, and you can easily connect multiple computers, share files, music, and video across your home or small office network, or even create a multiplayer gaming environment. 802.3x flow control on each port minimizes dropped packets when the port’s receiving buffer is full, giving you a more reliable connection for all of your connected devices. Specs   General features: Device Interfaces  • Eight 10/100 Mbps LAN ports   Standards  • IEEE 802.3 10BASE-T • IEEE 802.3u 100BASE-TX • IEEE 802.3x Flow Control • IEEE 802.3az Energy-Efficient Ethernet (EEE)   Switching Capacity  • 1.6 Gbps switching fabric   Advanced Features  • Auto MDI/MDIX crossover for all ports • Secure store-and-forward switching scheme • Full/half-duplex for Ethernet/Fast Ethernet speeds • Supports 2,048 byte jumbo frames • Back pressure at half-duplex operation • Wire-speed reception and transmission • Store and-Forward switching method • Auto-negotiation for each port • EEE compliant IEEE 802.3 10BASE-T • IEEE 802.3u 100BASE-TX • IEEE 802.3az EEE • IEEE 802.3x flow control   Data Transfer Rates  • Ethernet:   • 10 Mbps (half duplex)   • 20 Mbps (full duplex) • Fast Ethernet:   • 100 Mbps (half duplex)   • 200 Mbps (full duplex)   Transmission Method  • Store-and-forward   MAC Address Table Size  • 2,000   Packet Filtering/Forwarding Rates  • Ethernet: 14,880 pps per port • Fast Ethernet: 148,800 pps per port   RAM Buffer  • 96 KB per device   Physical Parameters LED Indicators  • Per port: Link/Activity/Speed • Per device: Power   Media Interface Exchange  • Auto MDI/MDIX adjustment for all ports   Dimensions  • 131 x 54 x 21 mm   Weight  • 74.8 grams   Power  • DC 5 V / 0.55 A • DC jack: Located on side   Power Consumption  • Power On (Standby): 0.55 watts • Maximum: 1.55 watts   Temperature  • Operating: 0° to 40°C  • Storage: -40° to 70°C   Humidity  • Operating: 10% to 90% (Non-condensing)  • Storage: 5% to 95% (Non-condensing)   MTBF  • 1 579 582 hours   Maximum Heat Dissipation  • 0.691 BTU/h   Certifications • CE Class B • CE (LVD 2006/95/EC)

Description: Details iShopping.pk brings you the best price for TP-Link 2.4GHz 300Mbps 12dBi Outdoor CPE (CPE220) with express shipping all over Pakistan.   Features: • Built-in 12dBi 2x2 dual-polarized directional MIMO antenna •  Adjustable transmission power from 0 to 30dBm/1000mw •  System-level optimizations for more than 13km long range wireless transmission •  TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications •  Centralized Management System – Pharos Control •  AP / Client / Bridge / Repeater / AP Router / AP Client Router (WISP) operation modes •  Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely   Specification: HARDWARE Processor Qualcomm Atheros 560MHz CPU, MIPS 74Kc Memory 64MB DDR2 RAM, 8MB Flash Interface 1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in) 1 10/100Mbps Shielded Ethernet Port (LAN1, Passive PoE Passthrough) 1 Grounding Terminal 1 Reset Button Power Supply Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins) Voltage range: 16-27VDC Power Consumption 10.8 Watts Max Note: When deployed using Passive PoE, the power drawn from the power source will  be higher by some amount depending on the length of the connecting cable. Dimensions (W x D x H) 11×3.1×2.1 inch (276×79×60 mm) Antenna Type Built-in 12dBi 2x2 Dual-polarized Directional Antenna Beam Width: 60° (H-Plane) / 30° (E-Plane) Note: For more details, please refer to datasheet Protection 15KV ESD Protection 6KV Lightning Protection Enclosure Outdoor ASA stabilized plastic material IPX5 waterproof Certification WIRELESS Wireless Standards IEEE 802.11b/g/n (with Pharos MAXtream disabled) Proprietary Protocol TDMA Mode (with Pharos MAXtream enabled) Wireless Speeds Up to 300Mbps (40MHz,Dynamic) Up to 144.4Mbps (20MHz,Dynamic) Up to 72.2Mbps (10MHz,Dynamic) Up to 36.1Mbps (5MHz,Dynamic) Frequency 2.4~2.483GHz Note: Available operating frequency may vary depending on the limitations  of the countries or regions in which the device is used. Transmission Power 30dBm/1000mw (Adjustable power by 1dBm) Note: Maximum transmission power may vary across different channels depending  on the limitations of the countries or regions in which the device is used. SOFTWARE Wireless Configurations Pharos MAXtream TDMA Technology 802.11b/g/n Modes Selectable Channel Width: 5/10/20/40MHz Automatic Channel Selection Transmission Power Control Dynamic Frequency Selection (DFS) WDS Enable/Disable Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption SSID Broadcast Enable/Disable Multi-SSID with VLAN Tagging (AP mode only) Distance/ACK Timeout Setting Wireless MAC Address Filter Wireless Advanced: > Beacon Interval/RTS Threshold/Fragmentation >Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia Management Discovery and Remote Management via Pharos Control application HTTP/HTTPS Web-based management System Log SNMP Agent(v2c) Ping Watch Dog Dynamic DDNS SSH Server System Tools                                     Wireless Signal Quality Indicators: Signal Strength/Noise/Transmit CCQ/CPU/Memory Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP Spectrum Analyzer Speed Test Ping Traceroute System-level Optimizations Optimized IGMP Snooping/Proxy for multicast applications Hardware watch dog POE ADAPTER Dimensions(W x D x H) 110×57×33.5mm Input Current 0.8A Max @ 100VAC Input Voltage 100VA~240VAC @ 50Hz~60Hz Output 24VDC, 1.0A Max +4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet) Efficiency >80% Output Voltage 24VDC(+4,5pins; -7,8pins) Input 100-240VAC, 50/60Hz Power Status LEDs 0~0.8A: Green 0.8A~1.0A: Red Certifications CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark Interfaces 1 AC Jack with Earth Ground 1 10/100Mbps/1000Mbps Shielded Ethernet Port (Power + Data) 1 10/100Mbps/1000Mbps Shielded Ethernet Port (Data) Button Remote Reset Button OTHERS Certification CE, FCC, RoHS, IPX5 System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7,  MAC OS, NetWare, UNIX or Linux. Note: We recommend you to use one of following Web browsers for an improved user  experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended. Environment Operating Temperature: -40°C~70°C (-40℉~158℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~95% non-condensing   TP-LINK’s 2.4GHz 300Mbps 12dBi Outdoor CPE, the CPE220 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications.  Professional performance, coupled with user-friendly design, makes CPE220 an ideal choice for both business and home users. Enterprise Hardware With Qualcomm Atheros enterprise level chipsets, high gain ante nnas and high quality material, specially designed enclosure, and P oE power supply, CPE220 is specially designed for outdoor use and can operate flawlessly in almost any climate, with operating temperatures ranging from -40℃ (-40℉) to +70 ℃ (158℉).     Advanced Antenna System Built-in High Gain Dual-Polarized Antenna  Dedicated metal reflector ensures higher gain  and lower noise interference   13km+ Wireless Data Transmission Specially designed for outdoor uses, ideal for long distance wireless data transmission over 13km+, tested in the field.     TP-LINK MAXtream TDMA Technology As network scale increases, wireless competition and collisions among CPEs and base stations will be so enormous that the real throughput of the network will drop, resulting in a serious impact on end-user experience. To mitigate these effects, the CPE220 uses MAXtream TDMA Technology.   Pharos Control – Centralized Management System CPE220 also comes equipped with centralized management software that helps users easily manage all the devices in their network from a single PC - Pharos Control. Functions like device discovery, status monitoring, firmware upgrading, and network maintenance can be managed using Pharos Control.   PharOS User-friendly web-based management system allows professionals to do more specific configurations.

D-Link (DES-1005P) 5-Port 10/100 Base-TX with 1 Port POE Unmanaged Switch Overview The D-Link DES-1005P 5-Port 10/100 Switch with 4 PoE Ports enables you to connect Power over Ethernet (PoE) devices such as wireless access points (APs), IP cameras, and IP phones to the network. Built with home and small business users in mind, the DES-1005P is compact and operates silently, making it ideal for most rooms and offices. Power over Ethernet The DES-1005P features four 10/100BASE-T ports that support the IEEE 802.3af and IEEE 802.3at PoE protocols, supplying up to 30 W on each PoE port and providing a total power budget of 60 W. You can connect compatible devices to the DES-1005P without using an additional power supply. This allows you to save on cabling and to install devices in locations without immediate access to power outlets. High Performance The DES-1005P features plug-and-play installation and requires no configuration. Auto MDI/MDI-X support on all ports removes the need for crossover cables when connecting to another switch or hub, and auto-negotiation on each port intelligently adjusts the port speed for compatibility with the connected device. With wire-speed filtering and store-and-forward switching, the DES-1005P maximizes network performance while minimizing the transmission of bad network packets. Green Technology The DES-1005P features green technology such as IEEE 802.3az Energy-Efficient Ethernet (EEE), link status detection, and cable length detection. EEE adjusts the power consumption of the switch based on network utilization, reducing the cost of ownership during periods of inactivity. Link status detection powers down ports when no links are detected, saving power when connected devices are shut down or disconnected. Cable length detection adjusts the power output of the port based on the cable length, reducing the power requirements of the switch. Compact and Silent The compact design of the DES-1005P allows placement in most locations, including those where space is at a premium. The desktop form factor provides everything you need to set up a new network or expand an existing network, while the fanless design ensures silent operation even in noise-sensitive areas such as workstations and meeting rooms. Technical Specifications General Hardware version = B1 Size  • Desktop Interfaces  • 5 10/100BASE-T ports Standards  • IEEE 802.3 10BASE-T Ethernet (twisted-pair copper) • IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper) • ANSI/IEEE 802.3 NWay auto-negotiation • IEEE 802.3x flow control • IEEE 802.1p QoS Media Interface Exchange  • Auto MDI/MDI-X adjustment on all ports Performance Switching Fabric  • 1 Gbps Transmission Method  • Store-and-forward Data Transfer Rates  • Fast Ethernet      • 100 Mbps (half-duplex)      • 200 Mbps (full-duplex) • Ethernet      • 10 Mbps (half-duplex)      • 20 Mbps (full-duplex) Packet Filtering / Forwarding Rates  • 0.744 Mpps MAC Address Table  • 2K entries per device RAM Buffer  • 64 KB per device PoE PoE Standards  • IEEE 802.3af  • IEEE 802.3at PoE-Capable Ports  • Ports 1 to 4 Power Budget  • 60 W (30 W max. per PoE port) LEDs • Power / PoE Max (per unit) • Power / Status (per port) • Activity / Link and Speed (per port) Physical Weight  • 0.26 kg (9.17 oz) Dimensions  • 100 x 98 x 28 mm (3.94 x 3.86 x 1.10 in) DC Input  • External 53.5 V / 1.2 A power adapter Power Consumption  • 63.26 W maximum (PoE on) • 3.61 W maximum (PoE off) • 0.68 W (standby) Temperature  • Operating: 0 to 40 ˚C (32 to 104 ˚F)  • Storage: -10 to 70 ˚C (-40 to 158 ˚F) Humidity  • Operating: 0% to 95% RH non-condensing  • Storage: 0% to 95% RH non-condensing Certifications Safety  • cUL • CB • LVD • BSMI EMI/EMC  • CE • BSMI • FCC • VCCI • RCM

D-Link 5‑Port Desktop Gigabit Poe+ Switch 5x Gigabit Ethernet ports (4x PoE+ ports) PoE+, 60W power budget 10 Gbps switching fabric capacity Plug & Play simplicity for easy installation 2-Year D-Link Warranty 5x Gigabit Ethernet ports (4x PoE+ ports) PoE+, 60W power budget 10 Gbps switching fabric capacity Plug & Play simplicity for easy installation 2-Year D-Link Warranty Fast. Compact. Convenient. The D‑Link DGS‑1005P 5‑Port Desktop Gigabit PoE+ Switch enables you to connect Power over Ethernet (PoE) devices such as wireless access points (APs), network video cameras and IP phones to the network. Built with home and small business users in mind, the DGS‑1005P is compact and operates silently, making it ideal for most rooms and offices. Gigabit Performance. The DGS-1005P features plug-and-play installation and requires no configuration. Automatic MDI/MDI-X support on all ports removes the need for crossover cables when connecting to another switch, and auto-negotiation on each port intelligently adjusts the port speed for compatibility with the connected device. With wire-speed filtering and store-and-forward switching, the DGS-1005P maximises network performance while minimising the transmission of bad network packets.                       Power Over Ethernet+ The DGS-1005P features four Gigabit Ethernet ports that support the IEEE 802.3af and IEEE 802.3at PoE, supplying up to 30 W on each PoE port and providing a total power budget of 60 W. You can connect compatible devices to the DGS-1005P without using an additional power supply. This allows you to save on cabling and power supplies and to install devices on locations without immediate access to power outlets. Green Technolog The DGS-1005P features green technology such as IEEE 802.3az Energy-Efficient Ethernet (EEE), link status detection, and cable length detection. EEE adjusts the power consumption of the switch based on network utilisation, reducing energy use during periods of inactivity. Link status detection powers down unused ports, saving power when connected devices are shut down or disconnected. Cable length detection adjusts the power output of the port based on the cable length, reducing the power requirements of the switch. Compact and Silent The compact design of the DGS-1005P allows placement in most locations, including those where space is at a premium. The desktop form factor provides everything you need to set up a new network or expand an existing network, while the fanless design ensures silent operation even in noise-sensitive areas such as workstations and meeting rooms.   Specs: Type Unmanaged Number of ports 5 ports Layer Layer 2 Main type of ports 1000BASE-T Gigabit Ethernet Switching capacity 10 Gbps PoE options 802.3af 802.3at Number of PoE ports 4 PoE power budget See datasheet Fanless   802.3az Energy-Efficient Ethernet support   Form Factor Desktop Housing Metal Jumbo frame yes Cable diagnostics yes MAC address 2K  

Description: Details iShopping.pk brings you the best price for Lorex 16 Channel 4MP NVR with 3TB HDD and 9 3MP Outdoor Cameras Kit (LNR4163C6D33B) with 1 year international warranty and express shipping all over Pakistan.   Specification: System Operating System Linux embedded Pentaplex Operation Simultaneous view / record / playback / back up / remote monitoring Number of Channels 16 Inputs / Outputs Video Inputs 16 (16 x PoE) Video Outputs 1 x VGA 1 x HDMI Audio Input 1 x RCA line in (for service only) Audio Output 1 x RCA line out (for service only) USB Ports 1 x rear 1 x front Alarm Inputs 4 Alarm Outputs 2 Video Output Resolution 1920 x 1080 / 1280 x 1024 / 1280 x 720 / 1024 x 768 PTZ Control Lorex IP PTZ cameras only Display Display Split 1 / 4 / 9 / 16 Live Display Speed NTSC: 480 fps PAL: 400 fps OSD Menu Camera Title / Time / Camera Lock / Motion Detection / Recording Status System Navigation USB mouse / IR remote control / front panel buttons Motion Area Setting Adjustable grid (22 x 18) Motion Sensitivity 100 levels Firmware Upgrade Automatic over the internet & via USB device and network User Authority By user group Time Synchronization Auto time sync by NTP server Recording Video Compression H.264 and MJPEG Recording Resolution 4 MP (2688 x 1520), 3 MP (2048 x 1536), 1080p (1920 x 1080), 720p (1280 x 720) Recording Rate NTSC: 480 fps at up to 4 MP PAL: 400 fps at up to 4 MP Recording Resolution Setting Different resolutions per camera Recording Quality Control 6 levels Recording Schedule By hour / by day / by recording mode / by motion / by channel Pre Recording 4 seconds maximum Post Recording 5 minutes maximum Reliability Watch-Dog, auto-recovery after power failure Covert Video Yes Playback Playback Channels 1 / 4 / 9 / 16 Playback Speed Variable, maximum 16x Playback Players Backup Player Search By time and event Log Search Up to 1000 lines for motion detection, configuration changes, connects/disconnects, video loss Audio Play Yes (audio camera required) Storage & Archive Storage Type Up to 2 x SATA HDDs Maximum Capacity Preinstalled: 3 TB Capacity: 12 TB (2 x 6 TB) Backup Media USB Flash Drive, HDD Backup File Format H.264 Connectivity Cloud Connectivity FLIR Cloud Supported Operating Systems Windows, Mac OS X Remote Software Client Software for Windows and Mac OS X Email Notification Text with snapshot Mobile OS Support iOS and Android devices DDNS Lorex DDNS System Configuration Full setup configuration over network Ports Programmable by user Network Protocol and Standards HTTP, IPv4/IPv6, TCP/IP, UPNP, RTSP, UDP, SMTP, NTP, DHCP, DNS, PPPOE, DDNS, FTP, IP Filter Network Interface RJ45 10/100/1000 Mbps Ethernet Bit Rate Total: 320 Mbps Per Camera: 48 to 8192 kbps General Power Consumption Approximately 30 W (without HDD) Power Supply Voltage 100-240 VAC, 50/60 Hz PoE Power Output 130 W 25 W per camera maximum Operating Temperature 14 to 131°F (-10 to 55°C) Operating Humidity 10 to 90% RH Dimensions 14.7 x 12.9 x 2.1" (375 x 327 x 53 mm) Weight 5.5 lb (2.3 kg) 3MP Outdoor Bullet Camera Image Sensor 1/3" 3 MP progressive-scan Video Format NTSC / PAL Effective Pixels H: 2304 x V: 1536 Resolution 3 MP (2048 x 1536) @ 25 fps Signal to Noise Ratio > 56 dB (AGC off) Iris EIS Shutter Speed 1/3 (1/4) to 1/100,000 seconds Minimum Illumination Without IR: 0.7 lux With IR: 0.4 lux Lens 2.8mm fixed Aperture f/2.0 Field of View Horizontal: 75° Termination RJ45 Ethernet  12 VDC power barrel (optional) IR LED 850 nm Night Vision Range Ambient Lighting: 130' / 40 m Total Darkness: 90' / 27 m Power Requirement PoE Class 3 / 12 VDC Power Consumption Max: 285 mA / 3.4 W Operating Temperature -22 to 140°F / -30 to 60°C Operating Humidity Dimensions 6.1 x 2.7 x 2.8" / 15.5 x 6.9 x 7.1 cm Weight 0.9 lb / 0.4 kg     Product Description: •  Record from and Manage Up to 16 Cameras •   3MP Recording Resolution per Camera •   3TB Preinstalled HDD •   6 x 2.8mm 3MP Bullet Cameras Included •   3 x 2.8mm 3MP Dome Cameras Included •   Camera Night Vision Up to 130' or 115' •   75° Horizontal Field of View •   Remote Monitoring via FLIR Cloud App •   Compatible with Windows and Mac •   IP66-Rated Cameras for Outdoor Use   Product Overview: Monitor up to nine outdoor areas with the  16-Channel 4MP NVR with 3TB HDD and 9 3MP Outdoor Cameras Kit  from  Lorex by FLIR. The included network video recorder features 16 channels with PoE and records at a resolution as high as 4MP. The FLIR Cloud app allows you to monitor areas on a Windows or Mac computer, or while on the go using your iOS or Android device. The nine included cameras (six bullet and three dome) capture high-quality 2048 x 1536 resolution video during the day and at night thanks to IR LEDs around the lens. Video is compressed using H.264 and MJPEG codecs for bandwidth and storage conservation, while the 3TB preinstalled HDD allows you to store all recorded video. Nine Ethernet cables are included to connect the cameras to the NVR. LNR400S Series 16-Channel 4MP NVR with 3TB HDD Manage and record from up to 16 network cameras with the   LNR400S Series 16-Channel 4MP NVR with 3TB HDD   from   Lorex. This network video recorder features 16 channels with PoE and up to 4MP recording resolution. It has HDMI and VGA video outputs to connect to a monitor and display a live view in up to 1080p resolution. Additionally, the NVR offers full audio capabilities with RCA input and output interfaces. The NVR can record by hour, by day, by recording mode, by motion, or by channel. Furthermore, Pentaplex operation allows for simultaneous viewing, recording, playback, backing up, and remote monitoring. All recordings are compressed using H.264 and MJPEG codecs to maximize your storage and conserve bandwidth and saved onto the preinstalled 3TB HDD. With FLIR Cloud connection you can view live video and access the NVR from a web browser or via the iOS and Android apps. •   Full pentaplex operation to simultaneously view, record, playback, backup, and remotely control the system •   4MP recording resolution •   Real-time recording at 25/30 fps per channel •   16 built-in PoE ports for video and power over a single cable •   Automatically detects compatible IP cameras in the network •   24/7 security-grade hard drive •   H.264 and MJPEG video compression •   High-capacity storage expandable up to 12TB •   Simultaneous playback and live view on the same screen •   Selectable area digital zoom in live view and playback modes •   Continuous, scheduled, and motion recording modes •   Two video outputs to connect multiple monitor •   HDMI connection supports high-definition video output •   USB backup of live video from a selected camera •   Email alerts with snapshot attachments •   Dual streaming to conserve bandwidth •   Push notifications of motion events •   iOS and Android mobile apps with live viewing, playback, video recording, and snapshot functionality •   Compatible with Windows and Mac OS X •   3-step remote monitoring with FLIR Cloud •   Automatic firmware updates •   Accurate time stamps with NTP and daylight saving time •   Convenient front panel button controls •   Flip and mirror camera view settings •   Dynamic click-and-drag camera channel assignment   3MP Outdoor Bullet Camera With an IP66-rated weatherproof housing and cold climate functionality, the  3MP Outdoor Bullet Camera  from  Lorex  can be used in a wide range of indoor or outdoor applications. The camera uses a 1/3" 3MP progressive-scan sensor for up to 2048 x 1536 resolution at 25 fps, and it features a 2.8mm fixed lens for a 75° field of view. The lens is surrounded by IR LEDs, providing the camera with enough light for up to 130' of vision in ambient lighting, and up to 90' of vision in complete darkness. Additionally, an IR cut filter enables accurate color representation, and a Day/Night mode will automatically switch to black and white images for clear detail in low light conditions. The camera uses PoE technology for a simplified setup, and it includes a 60' UL-compliant Cat5e cable. Additionally, you can use a single Ethernet cable to extend the camera's video signal and power up to 300' from the recorder. •   High-definition 3MP progressive-scan sensor for clear, high-quality images •   Infrared cut filter provides accurate color representation •   IR LEDs for night vision up to 130' in ambient lighting and 90' in total darkness •   Picture automatically switches to B&W, delivering maximum clarity in low light •   75° horizontal field of view for a wide coverage area •   Power over Ethernet technology with Cat5e cables offers an easy installation •   Includes 60' UL-compliant cable for surface and in-wall installations •   Extend the camera's video and power up to 300' from the recorder with a single Ethernet cable •   Cold climate capability in temperatures as low as -22°F •   IP66-rated weatherproof for indoor or outdoor installations •   Ceiling or wall mountable for maximum flexibility    

Description: Details iShopping.pk brings you the best price for Dahua 10-Port Unmanaged Desktop Switch with 8-Port PoE (PFS3010-8ET-96) with 1 Year Official Warranty and express shipping all over Pakistan.   Detail: Designed for commercial use, the DH-PFS3010-8ET-96 10-Port Fast Ethernet PoE+ Switch from Dahua comes with a total PoE power budget of up to 60W so you can plug PoE compliant devices to any of the eight Fast Ethernet PoE+ ports. Alongside the eight Fast Ethernet ports, you will find dual Gigabit Ethernet uplink ports to connect various network components directly to the switch. Once configured, the Dahua switch resides on Layer 2 of the network and supports a variety of network standards including 802.3, 802.3u, 802.3X, 802.3af, and 802.3at. Furthermore, this PoE switch is capable of transmitting power and data at distances of up to 820' to give you maximum flexibility when configuring your devices. • Layer 2 commercial switch • Long-distance PoE (LD PoE) transmits power and data 820' • Conforms to IEEE802.3, IEEE802.3u and IEEE802.3X • Conforms to IEEE802.3af and IEEE803.3at • Supports Hi-PoE (60W) • MAC auto-learning and aging; 16K MAC address capacity • MDI/MDIX self-adaptation • Metal enclosure   Specifications: Hardware Ethernet Port 8 Optical Port 0 Ethernet Port Speed 100 Mbps Data Transmission Port Port 1–8: 8 × RJ-45 10/100 Mbps (PoE) Port 9-10: 2 × RJ-45 10/100/1000 Mbps (Uplink) Power Supply 53V DC Operaing Temperature –10°C to +55°C (+14°F to +131°F) Operating Humidity 5%–95% (RH) Storage Temperature –20°C to +70°C (–4°F to +158°F) Storage Humidity 5%RH–95%RH Power Consumption Idling: 3.0W Full load: 96W Performance Capacity 5.60 Gbps Packet Forwarding Rate 4.17 Mpps Packet Buffer Memory 4 Mbit MAC Table Size 8K Communication Standard IEEE802.3, IEEE802.3u, IEEE802.3X, IEEE 802.3ab PoE PoE Standard IEEE802.3af; IEEE802.3at; Hi-PoE; IEEE802.3bt PoE Power 96W Power Consumption Management Yes PoE Pin Assignment 1, 2, 4, 5 (V+), 3, 6, 7, 8 (V-) Long Distance PoE 250 m long distance PoE transmission General Statics Protection Air discharge: 8kV Contact discharge: 6kV Thunder-proof Common mode: 4kV Differential mode: 2kV

Product Description Product Description   DGS-1008P 8-Port Gigabit Metal Desktop Switch with 4 PoE Ports View larger PoE View larger D-Link Green View larger DGS-1008P 8-Port Gigabit Metal Desktop Switch with 4 PoE Ports The DGS-1008P offers an economical way for SOHO and small to medium businesses (SMB) to benefit from the increased bandwidth of Gigabit Ethernet. It provides 8 Gigabit ports for fast server deployment to meet increasing network loads. The Gigabit PoE ports provide a larger bandwidth for high speed network applications, especially IEEE802.11n Access Points, high resolution video cameras, and phones. Gigabit Connection for Home The D-Link DGS-1008P 8-Port Gigabit PoE Unmanaged Desktop Switch enables home and office users to easily connect and supply power to Power over Ethernet (PoE) devices such as wireless access points (APs), IP cameras, and IP phones. It also provides the opportunity to add additional Ethernet devices like computers, printers, and Network Attached Storage (NAS) onto a network. This compact PoE switch operates quietly, making it ideal for use in virtually any room or office. Power Over Ethernet (PoE) The first four ports of the DGS-1008P support the IEEE 802.3af PoE protocol. Each of these four ports can supply up to 15.4 watts, for a total PoE budget of 52 watts, allowing users to attach an IEEE 802.3af-compliant device to the DGS-1008P that requires no additional power. Use PoE for applications that are far from power outlets or when you want to minimize the clutter of extra cables. Conserve Energy The DGS-1008P makes use of D-Link Green technology, providing energy savings, reduced power consumption, and a longer product life without sacrificing operational performance or functionality. This switch helps to conserve energy through methods such as Link Status and Cable Length Detection. The Link Status feature automatically powers down ports that have no link, allowing the switch to save substantial amounts of energy by cutting power for unused ports or ports connected to computers that have been shut down. It can also detect connected cable lengths, and adjust power usage accordingly, helping you save energy without affecting networking performance. In addition, the fanless design extends the product’s life and also reduces noise. Auto MDI/MDIX Crossover All ports support automatic MDI/MDIX crossover, eliminating the need for crossover cables or uplink ports. Each port can be plugged directly to a server, hub, router, or switch using regular straight-through twisted-pair Ethernet cables.   Box Contains D-Link Switch Power Adapter User Documentation/Media      

UGreen 10 in 1 Type-C Multiple Ports Hub Price in Pakistan  10-in-1 USB C Hub Expansion This 10-in-1 USB-C Dock features a Gigabit Ethernet, a type C PD charging port, a 4K HDMI port, 3 USB 3.0 Ports, a SD/TF card reader, a 3.5mm Audio jack and a 1080P VGA port. All hub ports can be in use simultaneously, allowing you to connect a keyboard, mouse, USB driver, external Disk to MacBook Pro 4K UHD Visual Feast Mirror or extend your screen with USB C adapter HDM port and directly stream max 4K UHD 3840×2160 at 30Hz, Full HD 1080P video to external HDTV, monitor or projector for a cinema-like visual feast. When the HDMI and VGA output ports work simultaneously, the display will ONLY duplicate and NOT extend but the maximum resolution of both ports is 1080P Reliable Data Transfer 3 USB 3. 0 ports supports super faster data transfer up to 5Gbps, which is 10x faster than USB 2. 0 and allows you to transfer HD movies or files in just seconds. SD & TF slots support data transfer speeds up to 480Mbps (SD & TF cards can be read simultaneously) Fast Power Delivery & RJ45 Ethernet  100W power delivery charging port allows you to charge your computer, MacBook Pro or other Type-C devices while transferring data. USB C to RJ45 1000M Ethernet Port backwards compatible with 100Mbps/10Mbps RJ45 LAN. Gigabit Ethernet port ensures a more stable and faster wired network connection Universal Compatibility(Partial List) Compatible Type C PC/Tablet Apple MacBook Pro (2019/2018/2017/2016), MacBook (2016/2017/2018), iMac 2019/2017, iMac Pro, MacBook Air 2019/2018, Mac Mini, New MacBook with Thunderbolt 3, iPad Pro 2020/2019/2018 with IOS 13.0 and above (Ensure the file format of usb external storage device is EXFAT or FAT32.) Samsung Chromebook Pro, Chromebook Plus, Notebook 9 13?, Galaxy Book 12?, Galaxy Book 10.6, Galaxy Tab Pro S 12?, Samsung Tab S4 / S5e/ S6 Google Pixelbook, Chromebook Pixel Microsoft Surface Pro X, Surface Go, Surface Book 2, Surface Pro 7, Surface Laptop 3, Microsoft Lumia 950/950 XL DELL XPS 13, XPS 15, XPS12 9250, Precision 5510, Inspiron 15 7000, Latitude 7285 Lenovo Yoga 920, 910, 720, ThinkPad X1, Ideapad Air 12, Miix 630 HP Spectre 13, Spectre X360, ENVY 13, ENVY X360, HP EliteBook Folio G1 Huawei MateBook X Pro, MateBook X, Huawei MateBook E ASUS Chromebook Flip, ZenBook3, ASUS ZenBook Pro, Asus ZenBook Flip, ASUS Transformer 3 Pro T303UA Acer swift 7, Acer Chromebook, Xiaomi Mi Notebook Air 12.5/13.3, Mi Notebook Pro 15.6 “, and more Compatible USB C Cell Phones Samsung Galaxy Note 10 9, S10 S9 S9+, S8, S8 Plus, Note8, Oneplus 7 Pro, and more Huawei Mate 20, Mate 20 Pro, Mate 20 X, Mate 10, Mate 10 Pro, P30, P30 Pro, P20, P20 Pro, Honor View 20, View 10, Note 10 Package Content 1 x 10 in 1 USB C Hub UGREEN USB C Hub 10 in 1 Multi Port Type C Docking Station Expand your macbook with 4K HDMI, 1080P VGA, Gigabit Ethernet, 3 USB 3.0 ports, TF SD card reader, 100Wtype C PD charging port and a 3.5mm Audio jack. This USB Type C hub adapter provides with 3 USB 3.0 ports for your laptop, enhance the capability to connect more USB devices simultaneously, no need to plugging & unplugging repeatedly anymore; Simply Plug and Play, no software or drivers needed, offer you full safe using experience with built-in Over-current/Over-voltage/Reverse current protections; Before purchasing, please make sure your laptop/phone/PC supports DP ALT MODE. which means the USB c port on your device can support video output, data syncing, and charging functions before purchase.   Note: 1. We suggest just one HDD/SSD is connected at a time due to the power output limitations of some laptops. 2. If the wireless network is affected, please set your router from 2.4GHz to 5GHz. 3. HDMI and VGA ports can be used or connected at the same time. 4. USB C PD fast charging is only for laptops but not for phones. Phones only support normal charging. Universal Compatibility(Partial List) Compatible Type C PC/Tablet Apple MacBook Pro (2019/2018/2017/2016), MacBook (2016/2017/2018), iMac 2019/2017, iMac Pro, MacBook Air 2019/2018, Mac Mini, New MacBook with Thunderbolt 3, iPad Pro 2020/2019/2018 with IOS 13.0 and above (Ensure the file format of usb external storage device is EXFAT or FAT32.) Samsung Chromebook Pro, Chromebook Plus, Notebook 9 13?, Galaxy Book 12?, Galaxy Book 10.6, Galaxy Tab Pro S 12?, Samsung Tab S4 / S5e/ S6 Google Pixelbook, Chromebook Pixel Microsoft Surface Pro X, Surface Go, Surface Book 2, Surface Pro 7, Surface Laptop 3, Microsoft Lumia 950/950 XL DELL XPS 13, XPS 15, XPS12 9250, Precision 5510, Inspiron 15 7000, Latitude 7285 Lenovo Yoga 920, 910, 720, ThinkPad X1, Ideapad Air 12, Miix 630 HP Spectre 13, Spectre X360, ENVY 13, ENVY X360, HP EliteBook Folio G1 Huawei MateBook X Pro, MateBook X, Huawei MateBook E ASUS Chromebook Flip, ZenBook3, ASUS ZenBook Pro, Asus ZenBook Flip, ASUS Transformer 3 Pro T303UA Acer swift 7, Acer Chromebook, Xiaomi Mi Notebook Air 12.5/13.3, Mi Notebook Pro 15.6 “, and more   Compatible USB C Cell Phones Samsung Galaxy Note 10 9, S10 S9 S9+, S8, S8 Plus, Note8, Oneplus 7 Pro, and more Huawei Mate 20, Mate 20 Pro, Mate 20 X, Mate 10, Mate 10 Pro, P30, P30 Pro, P20, P20 Pro, Honor View 20, View 10, Note 10   4K UHD Visual Feast With 4K HDMI and 1080P VGA video outputs, directly stream max 4K UHD 3840×2160 at 30Hz, Full HD 1080P video to external HDTV. Give you vivid 3D effect video Sync. Effortless Data Transfer This USB Type C hub adds extra 3 USB 3.0 ports for your laptop, allowing to connect multiple USB peripherals. Support faster data transfer up to 5Gbps, 10X faster than USB 2.0. Fast and Stable Internet Access USB C to RJ45 1000M Ethernet Port backwards compatible with 100Mbps/10Mbps RJ45 LAN. Gigabit Ethernet port ensures a more stable and faster wired network connection. 100W Fast Power Delivery Support PD charging up to 100W, This multiport USB C adapter provides one Type-C pass through female port by which you could securely and quickly charge your Macbook or other USB-C devices. 3.5mm Audio Jack There is a 3.5mm Audio port for you to put in your wired headset, so that you can enjoy music without disturbing others. Compact & Effective SD/TF Card Adapter Allow to read 2 memory cards simultaneously at super speed 104MB/S and is widely compatible below cards. UGREEN USB C Hub 10 in 1

Description: Details iShopping.pk brings you the best price for Ubiquiti airFiber 5GHz Carrier Backhaul Radio With LTU Technology (AF-5XHD) with express shipping all over Pakistan.   Ubiquiti airfiber 5xhd Price in Pakistan Features: • Programmable Transmit Power: The radio's transmitpower level can be programmed up to +29 dBm. • Programmable Duty Cycle: (GPS synchronized frames) The AF-5XHD allows configuration of asymmetric TX and RX duty cycles. TX ratios include 25%, 33%, 50%, 66.7%, and 75%. • Configurable GPS Synchronization: The AF-5XHD offers configurable support for 2, 2.5, 4, and 5 ms frames. Timing is compatible with all other synchronous systems. • Split TX and RX Frequency: The radio can operateon different frequencies for TX and RX, allowing great flexibility for interference avoidance. • Split TX and RX Channel Bandwidth: Support for different channel bandwidths for TX and RX allows users to scale required data capacity more efficiently • Adaptive Modulation up to 1024QAM: Adaptive modulation rates of up to 1024QAM (4096QAM with targeted upgrade) are supported. • Dual Redundant Gigabit Ethernet Ports with PoE: The AF-5XHD has two Gigabit Ethernet ports that can be used to provide redundant PoE power. • OFDM and OFDMA Support: The radio offers flexible scheduling for 2, 4, or 8 sub channels. • Bluetooth Wireless Configuration: Use the built-in Bluetooth interface for wireless configuration. • AlignLock™ Antenna Aiming Guard This alerts the user when the radio or antenna aiming is changed due to tampering, impact, or storm damage. • User-Configurable Interference Mitigation Three user-selectable profiles support both high interference and greenfield deployments for robust, optimal performance. • Redundant Images for Fail-Safe Configuration Creation of backup firmware images ensures fail-safe configuration and enhances reliability. • Persistent Spectrum Analysis with Dedicated RX Perform real-time spectral analysis for the full band on live links without interrupting the link operation. • Wide Voltage Range, Enhanced Surge Protection The AF-5XHD has an operating voltage range of 24 48VDC and provides enhanced surge protection.   Specifications: Dimensions 224 x 82 x 48 mm (8.82 x 3.23 x 1.89") Weight 0.35 kg (0.77 lb) GPS External, Magnetic Base Operating Frequency 5150-5250MHz 5740-5850MHz Power Supply 24V, 1A PoE Gigabit Adapter (Included) Power Method Dual Passive Power over Ethernet Maximum Power Consumption 12W Supported Voltage Range 20-50VDC Mounting airFiber X Mount (Rocket Mount Compatible) GPS Pole Mount (Included) Certifications FCC Operating Temperature -40 to 55° C (-40 to 131° F) Data Port (1) 10/100/1000 Ethernet Port Configuration Port (1) 10/100/1000 Ethernet Port Processor LTU IC Maximum Throughput 1+ Gbps Maximum Range 200+ km (Throughput and range values may vary depending on the environmental conditions) Encryption 128-bit AES Operating System airOS F Max TX Power 29 dBm (Dependent on Regulatory Region) Frequency Accuracy ± 2.5 ppm without GPS Synchronization ± 0.2 ppm with GPS Synchronization Channel Bandwidth 10/20/30/40/50/60/80/100 MHz Selectable

Linksys WAP1200AC AC1200 Wi-Fi  The  Linksys WAP1200AC AC1200 Wi-Fi Access Point  is the latest in the AC-series access points, which utilizes the  Cross Band technology.  It can be used as a  Wireless Range Extender  or a  Wired Access Point.  Both functions maximize simultaneous use of the 2.4 GHz and 5 GHz bands for high-speed data transfer, uninterrupted streaming, and gaming.   Front Panel    Antenna positioning is done depending on the type of home you have. IMPORTANT:   The antennas are fixed and can  ONLY  rotate at  180 degrees.  Do  NOT  force the antennas too far back, otherwise, they will break. For  Single-story homes  -   Both antennas should be pointing  down. NOTE:   For illustration purposes, the Linksys RE6700 is used in this example. For  Multi-story homes  -  One (1)  antenna should  always be pointing down  to provide coverage for the current floor.  The second antenna (any antenna) should be positioned differently  depending  on where the Linksys WAP1200AC is located and where the coverage is needed. NOTE:   For the most part, position one (1) antenna at  45 degrees  as shown in  Position   A  below.  If there are issues with coverage, move the antenna at about  50-55 degrees  down as shown in  Position   B.    Position A  can be used if the Linksys WAP1200AC is in the  middle  of the house.   Position B  can be used if the Linksys WAP1200AC is connected to an outlet located at the  farther side  of the house.   Side Panel    Wi-Fi Protected Setup™ (WPS)  button – Uses the WPS technology to automatically and securely add wireless devices to your network.  Reset  button – Press and hold for  10 seconds  to reset the Linksys WAP1200AC to factory default settings.   Bottom Panel    ETHERNET  port – Connect an Ethernet-enabled device to the network using either a  Cat 5  or  6  Ethernet cable.   Product Features Concurrent dual-band (2.4 GHz and 5 GHz) 802.11ac Wireless technology Compatible with 802.11 a/b/g/n Data Rate of up to 300 Mbps for 2.4 GHz and up to 867 Mbps for 5 GHz Two (2)  external non-detachable antennas 2 x 2 Spatial Streams One (1)  10/100/1000 Fast Ethernet port with auto MDIX sensing Spot Finder technology (on Range Extender Mode only) Wi-Fi Protected Setup™ (WPS) Browser-based Setup (BBS) Cross Band technology  (on Range Extender Mode only) Beamforming technology LED Behaviors  Power / WPS LED: OFF  – There is no power on the Linksys WAP1200AC. Blinking Green   / Yellow  – The Linksys WAP1200AC is starting up, resetting to factory defaults, upgrading its firmware, or the WPS connection is in process. Solid Green   / Yellow  – The Linksys WAP1200AC is ready to use. Solid Amber   / Red  – There is a weak connection with the router. NOTE:   To fix this issue, unplug the Linksys WAP1200AC and move it closer to the router. Blinking Amber / Red  – The Linksys WAP1200AC is not connected to the router, or the WPS pairing failed. NOTE:   To fix this issue, make sure that your router has an active Internet connection and the Wi-Fi is turned ON.  If the router is working fine, unplug the Linksys WAP1200AC then move it closer to the router.  Plug it back in, wait for one (1) minute, and reconnect to your network.  Ethernet LED  –   It lights up solid  Green  when an Ethernet device is connected and active.  It will blink when sending or receiving data over the Ethernet port.   Product Requirements Wi-Fi enabled computers or mobile devices AC power outlet Ethernet router or switch with available RJ45 Ethernet port and RJ45 Cable for Access Point mode or wireless network for Range Extender mode For browser configuration: Internet Explorer® 8 or higher Safari® 5.1 for Mac® or higher Google Chrome™ 25.0 or higher Firefox® 20 or higher