Port poe
Top sales list port poe
Pakistan (All cities)
D-Link (DES-1005P) 5-Port 10/100 Base-TX with 1 Port POE Unmanaged Switch Overview The D-Link DES-1005P 5-Port 10/100 Switch with 4 PoE Ports enables you to connect Power over Ethernet (PoE) devices such as wireless access points (APs), IP cameras, and IP phones to the network. Built with home and small business users in mind, the DES-1005P is compact and operates silently, making it ideal for most rooms and offices. Power over Ethernet The DES-1005P features four 10/100BASE-T ports that support the IEEE 802.3af and IEEE 802.3at PoE protocols, supplying up to 30 W on each PoE port and providing a total power budget of 60 W. You can connect compatible devices to the DES-1005P without using an additional power supply. This allows you to save on cabling and to install devices in locations without immediate access to power outlets. High Performance The DES-1005P features plug-and-play installation and requires no configuration. Auto MDI/MDI-X support on all ports removes the need for crossover cables when connecting to another switch or hub, and auto-negotiation on each port intelligently adjusts the port speed for compatibility with the connected device. With wire-speed filtering and store-and-forward switching, the DES-1005P maximizes network performance while minimizing the transmission of bad network packets. Green Technology The DES-1005P features green technology such as IEEE 802.3az Energy-Efficient Ethernet (EEE), link status detection, and cable length detection. EEE adjusts the power consumption of the switch based on network utilization, reducing the cost of ownership during periods of inactivity. Link status detection powers down ports when no links are detected, saving power when connected devices are shut down or disconnected. Cable length detection adjusts the power output of the port based on the cable length, reducing the power requirements of the switch. Compact and Silent The compact design of the DES-1005P allows placement in most locations, including those where space is at a premium. The desktop form factor provides everything you need to set up a new network or expand an existing network, while the fanless design ensures silent operation even in noise-sensitive areas such as workstations and meeting rooms. Technical Specifications General Hardware version = B1 Size • Desktop Interfaces • 5 10/100BASE-T ports Standards • IEEE 802.3 10BASE-T Ethernet (twisted-pair copper) • IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper) • ANSI/IEEE 802.3 NWay auto-negotiation • IEEE 802.3x flow control • IEEE 802.1p QoS Media Interface Exchange • Auto MDI/MDI-X adjustment on all ports Performance Switching Fabric • 1 Gbps Transmission Method • Store-and-forward Data Transfer Rates • Fast Ethernet • 100 Mbps (half-duplex) • 200 Mbps (full-duplex) • Ethernet • 10 Mbps (half-duplex) • 20 Mbps (full-duplex) Packet Filtering / Forwarding Rates • 0.744 Mpps MAC Address Table • 2K entries per device RAM Buffer • 64 KB per device PoE PoE Standards • IEEE 802.3af • IEEE 802.3at PoE-Capable Ports • Ports 1 to 4 Power Budget • 60 W (30 W max. per PoE port) LEDs • Power / PoE Max (per unit) • Power / Status (per port) • Activity / Link and Speed (per port) Physical Weight • 0.26 kg (9.17 oz) Dimensions • 100 x 98 x 28 mm (3.94 x 3.86 x 1.10 in) DC Input • External 53.5 V / 1.2 A power adapter Power Consumption • 63.26 W maximum (PoE on) • 3.61 W maximum (PoE off) • 0.68 W (standby) Temperature • Operating: 0 to 40 ˚C (32 to 104 ˚F) • Storage: -10 to 70 ˚C (-40 to 158 ˚F) Humidity • Operating: 0% to 95% RH non-condensing • Storage: 0% to 95% RH non-condensing Certifications Safety • cUL • CB • LVD • BSMI EMI/EMC • CE • BSMI • FCC • VCCI • RCM
Rs 5.499
See product
Lahore (Punjab)
do contact us for purchasing POE 8 PORT GIGA SWITCH which is available at Network Zone at very smart price , NETWORK ZONE MISS NOREEN JAFFERY
Rs 11.500
See product
Pakistan (All cities)
· PoE input: 1 RJ45 port · PoE output: 4 RJ45 ports · 10/100M Supported · Extend the range of PoE an additional 120 meters
See product
Pakistan (All cities)
Description: Details iShopping.pk brings you the best price for TP-Link 8-Port Gigabit Desktop Switch with 4-Port PoE (TL-SG1008P) with express shipping all over Pakistan. Features: • 8 10/100/1000Mbps RJ45 ports • With four PoE ports, transfers data and power on one single cable • Working with IEEE 802.3af compliant PDs, expands home and office network • Requires no configuration and installation • 802.1p/DSCP QoS enable smooth latency-sensitive traffic • Supports PoE power up to 15.4W for each PoE port • Supports PoE power up to 55W for all PoE ports • Supports PoE IEEE 802.3af compliant PDs • Supports IEEE 802.3x flow control for Full-duplex Mode and backpressure for Half-duplex Mode • 4K entry MAC address table of the TL-SG1008P with auto-learning and auto-aging • 802.1p/DSCP QoS enable smooth latency-sensitive traffic • LED indicators for monitoring power, link, activity and speed • External power adapter supply Specification: HARDWARE Interface 8 10/100/1000Mbps RJ45 Ports AUTO Negotiation/AUTO MDI/MDIX Network Media 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 100BASE-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Fan Quantity Fanless Power Consumption 65.2W (max. with 55w PoE device connected) 5.5W (max. no PoE device connected) External Power Supply External Power Adapter(Output: 48VDC / 1.25A) PoE Ports (RJ45) Standard: 802.3 af compliant PoE Ports: Port1- Port4 Power Supply: 55W Backbound Bandwidth 16Gbps Mac Address Table 4K Dimensions (W x D x H) 6.7*3.9*1.1 in. (171*98*27 mm) SOFTWARE Transmission Method Store-And-Forward Advanced Functions Compatible With IEEE 802.3af Compliant PDs Priority Function Mac Address Auto-Learning And Auto-Aging EEE802.3x Flow Control 802.1p/DSCP QoS OTHERS Certification CE, FCC, RoHS Consumption 65.2W (max. with 55w PoE device connected) 5.5W (max. no PoE device connected) Environment Operating Temperature: 0°C~40°C (32°F~104°F) Storage Temperature: -40°C~70°C (-40°F~158°F) Operating Humidity: 10% ~ 90% non-condensing Storage Humidity: 5%~90% non-condensing What This Product Does 8-Port Gigabit Desktop Switch with 4-Port PoE provides the seamless network connection. It integrates 1000Mbps Gigabit Ethernet and 10/100Mbps Fast Ethernet network capabilities. How This Product Works 4 of the 8 Auto-Negotiation RJ45 ports (port-1 to port-4) of the switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc. Overload Arrangement TL-SG1008P has the priority* function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is >= 55W, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port. Port Priority Function Priority (port 1=port 2=port 3>port 4): This function will help protect the system if the system power becomes overloaded. For example, Port 1, 2 and 4 are using 15.4W (maximum power per port is 15.4W), the system power is 46.2W in total. If there is an additional PD inserted to Port 3 with 10W then the system will cut off Port 4 to protect the system, this means Port 1, 2 will use 15.4W, and Port3 will use 10W, and no power will be supplied to Port 4. Easy To Use TL-SG1008P is easy to install and use. It requires no configuration and installation. With desktop design, outstanding performance and quality, the TP-LINK TL-SG1008P 8-Port Gigabit Desktop Switch with 4-Port PoE is a great selection for expanding your home or office network.
See product
Pakistan (All cities)
Description: Details iShopping.pk brings you the best price for TP-Link 8-Port 10/100Mbps Desktop Switch with 4-Port PoE (TL-SF1008P) with express shipping all over Pakistan. Feaures: • With four PoE ports, transfers data and power on one single cable • Working with IEEE 802.3af compliant PDs, expands home and office network • Requires no configuration and installation • Supports PoE power up to 15.4W for each PoE port • Supports PoE power up to 57W for all PoE ports • Supports PoE IEEE 802.3af compliant PDs • Supports IEEE 802.3x flow control for Full-duplex Mode and backpressure for Half-duplex Mode • 2K entry MAC address table of the TL-SF1008P with auto-learning and auto-aging • LED indicators for monitoring power, link, activity • External power adapter supply Specification: HARDWARE Interface 8 10/100Mbps RJ45 Ports AUTO Negotiation/AUTO MDI/MDIX Network Media 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 100BASE-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Fan Quantity Fanless Power Consumption Maximum (PoE on): 60.2W (220V/50Hz) Maximum (PoE off): 3.2W (220V/50Hz) External Power Supply External Power Adapter(Output: 48VDC / 1.25A) PoE Ports (RJ45) Standard: 802.3 af compliant PoE Ports: Port1- Port4 Power Supply: 57W Backbound Bandwidth 1.6Gbps Mac Address Table 2K Dimensions (W x D x H) 6.7*3.9*1.1 in. (171*98*27 mm) SOFTWARE Transmission Method Store-And-Forward Advanced Functions Compatible With IEEE 802.3af Compliant PDs Priority Function Mac Address Auto-Learning And Auto-Aging IEEE802.3x Flow Control For Full-Duplex Mode And Backpressure For Half-Duplex Mode OTHERS Certification FCC, CE, RoHS Consumption 2.3 watts (max. no PD connected) 59.3 watts (max. with 57w PD connected) Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing What This Product Does TL-SF1008P is an 8 10/100Mbps ports unmanaged switch that requires no configuration and provides 4 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc. Power over Ethernet 4 of the 8 Auto-Negotiation RJ45 ports (port-1 to port-4) of the switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af compliant Powered Devices (PDs). Overload Arrangement TL-SF1008P has the priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is >= 57W, a priority will be arranged among the PoE ports, then the system will cut o‑ the power of the lowest-priority port. Port Priority Function Priority (port-1=port-2=port-3>port-4): This function will help to ensure the normal operation of the system, it means Port 4 will be cut off when all total PoE PDs power consumption exceed 57W. For an example, Port 1, 2 and 4 is using 15.4W (maximum power for per port is 15.4W); the system power is 46.2W in total. If there is an additional PD inserted to Port 3 with 12W, and then the system will cut off the power of Port 4 because of the overloaded power, this means Port 1, 2 will use 15.4W, and Port3 will use 12W, no power will be supplied to Port 4. Easy To Use TL-SF1008P is easy to install and use. It requires no configuration and installation. With desktop design, outstanding performance and quality, the TP-LINK’s TL-SF1008P 8-Port 10/100Mbps Desktop Switch with 4-Port PoE is an ideal choice for expanding your home or office network.
See product
Pakistan (All cities)
Description: Details iShopping.pk brings you the best price for TP-Link 8-Port Gigabit Easy Smart Switch with 4-Port PoE (TL-SG108PE) with express shipping all over Pakistan. Features: • 8 10/100/1000Mbps ports provide instant large file transfers • Equipped with 4 802.3af PoE ports with up to 15.4W for each port • Supports PoE power up to 55W for all PoE ports • IEEE 802.3x flow control provides reliable data transfers • 15KB Jumbo frame improves performance of large data transfers • Effective network monitoring via Port Mirroring, Loop Prevention and Cable Diagnostics • Port/802.1p/DSCP QoS enable smooth latency-sensitive traffic • Abundant VLAN features improve network security via traffic segmentation • IGMP Snooping optimizes multicast applications • Web-based user interface and Easy Smart Configuration Utility simplify configuration • With 4 PoE ports, data and power can be transferred on one single cable • Provides network monitoring, traffic prioritization and VLAN features • Simple network set-up on top of plug-and-play connectivity Specification: HARDWARE Standards and Protocols IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3x, IEEE 802.1q, IEEE 802.1p Interface 8 10/100/1000Mbps RJ45 Ports AUTO Negotiation/AUTO MDI/MDIX Network Interface 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 100BASE-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Number of fans Fanless Food External Power Adapter(Output: 48VDC / 1.25A) Consumption Maximum (PoE on): 65.2W (220V/50Hz) Maximum (PoE off): 5.2W (220V/50Hz) Ports PoE+ Ports PoE Standard: 802.3 af compliant PoE Ports: Port 1- Port 4 PoE Power Budget: 55W PERFORMANCES Switching capacity 16Gbps Packet transfer rate 11.9Mpps MAC address table 4K Packet buffer memory 1.5Mb Jumbo Frame 15KB SOFTWARE Quality of Service QoS Support Port-Based/802.1p/DSCP priority Support 4 priority queues Rate Limit Storm Control Functions N2 IGMP Snooping V1/V2/V3 Link Aggregation Port Mirroring Cable Diagnostics Loop Prevention VLAN Supports up to 32 VLANs simultaneously (out of 4K VLAN IDs) MTU/Port/Tag VLAN Administration Web-based GUI Easy Smart Configuration Utility Transmission method Store-And-Forward OTHER Certification FCC, CE, RoHS System Requirements Microsoft® Windows® for running Utility Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90%RH non-condensing Storage Humidity: 5%~95%RH non-condensing What This Product Does The TL-SG108PE is an 8-port Gigabit Easy Smart Switch with 4 PoE ports, represents a powerful upgrade from an unmanaged switch. It is designed specically for small businesses that require simple network management and PoE function. The TL-SG108PE can connect and power up to four PoE devices, such as wireless access points (APs), IP cameras, and IP phones. Through its web-based user interface and management utility, the TL-SG108PE offers a variety of useful features, including network monitoring, trafc prioritization, and enhanced QoS. Additionally, with port-based, tag-based and MTU VLAN, TL-SG108PE can improve security and meet more network segmentation requirements. Power Over Ethernet 4 of the 8 Auto-Negotiation RJ45 ports (port 1 to port 4) of the switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af compliant Powered Devices (PDs). Effective Management TL-SG108PE offers network monitoring for users to observe trafc behavior. Through its web-based user interface and management utility, the TL-SG108PE offers a variety of useful features, including network monitoring, trafc prioritization, and enhanced QoS. With Port Mirroring, Loop Prevention and Cable Diagnostics features, TL-SG108PE can identify and even locate connection problems on your business network. Moreover, administrators can designate the priority of the trafc based on Port Priority, 802.1P Priority and DSCP Priority, to ensure that voice and video are always clear, smooth and lag-free. Additionally, to improve security and network performance, TL-SG108PE supports MTU VLAN, port-based VLAN and 802.1Q-based VLAN functions. TL-SG108PE is an upgrade from the plug-and-play Unmanaged Switch, delivering great value while empowering your network and similarly delivering great value to the end user. Easy to Use The TL-SG108PE is easy to use and manage. Auto MDI/MDI-X crossover on all ports eliminates the need for crossover cables and uplink ports. Auto-negotiation on each port senses the link speed of a network device (either 10, 100, or 1000 Mbps) and intelligently adapts to promote compatibility and optimize performance. The convenient, compact size makes it ideal for desktops with limited space. Active LED indicators provide real-time status feedback and basic error diagnostics.
See product
Pakistan (All cities)
Description: Details iShopping.pk brings you the best price for TP-Link 16-Port Gigabit Easy Smart PoE Switch with 8-Port PoE+ (TL-SG1016PE) with express shipping all over Pakistan Features: • 16 10/100/1000Mbps RJ45 ports • Equipped with 8 PoE+ supported ports to transfer data and power over a single cable • With a total PoE power budget of 110W, up to 30W per port • Works with IEEE 802.3af/at compliant devices, expanding home and office networks • Simple network set-up on top of plug-and-play connectivity • Web-based user interface and management utility simplify configuration Specification: HARDWARE FEATURES Standards and Protocols IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.1q, IEEE 802.1p Interface 16 10/100/1000Mbps RJ45 Ports AUTO Negotiation/AUTO MDI/MDIX Network Media 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 100BASE-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Fan Quantity 1 Power Supply 100-240VAC, 50/60Hz Power Consumption Maximum: 124.4W (220V/50Hz) PoE Ports (RJ45) Standard: 802.3 at compliant PoE Ports: Port 1- Port 8 PoE Power Budget: 110W Dimensions (W x D x H) 11.6*7.1*1.7 in. (294*180*44 mm) PERFORMANCE Switching Capacity 32Gbps Packet Forwarding Rate 23.8Mbps MAC Address Table 8K Packet Buffer Memory 4.1Mbit Jumbo Frame 9KB SOFTWARE FEATURES Quality of Service Support Port-Based/802.1p/DSCP priority Support 4 priority queues Rate Limit Storm Control L2 Features IGMP Snooping V1/V2/V3 Link Aggregation Port Mirroring Cable Diagnostics Loop Prevention VLAN Supports up to 128 VLANs simultaneously (out of 4K VLAN IDs) MTU/Port/Tag VLAN Management Web-based GUI Easy Smart Configuration Utility Transmission Method Store-And-Forward OTHERS Certification FCC, CE, RoHS Package Contents TL-SG1016PE Power Cord Installation Guide Resource CD Rackmount Kit Rubber Feet System Requirements Microsoft® Windows® for running Utility Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing What This Product Does The TL-SG1016PE is an 16-Port Gigabit Desktop/Rack mountable Switch with 8 ports supporting the PoE+ standard. It provides a simple way to expand a wired network by transferring power and data over a single Ethernet Cable. With a total power budget of 110W, up to 30W per port, TL-SG1016PE can power more high-powered devices such as wireless Access Points (APs), IP Cameras or IP Phones. Moreover, with innovative energy-efficient technology, the TL-SG1016PE can save up to 75% of the power consumption, making it an eco-friendly solution for your business network. How This Product Works 8 ports of TL-SG1016PE support Power over Ethernet Plus (PoE+) standard which can automatically detect and supply power to any IEEE 802.3af/at compliant device(s). In this situation, the electrical power is transmitted along with data in a single cable, allowing you to expand your network where there are electrical cables or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones. Overload Arrangement TL-SG1016PE has a priority function which helps protect the system when its power is overloaded. If all PoE+ devices’ power consumption is greater than or equal to 110W, a priority will be arranged among the 16 PoE+ ports, at which point the system will cut off the power of the lowest-priority port. Port Priority Function *Priority (port 1>port 2>port 3>port 4> port 5>port 6>port 7>port 8): This function will help protect the system if the system power becomes overloaded. For example, Port 1, 2, 3, 4, and 5 are using 30w (maximum power per port is 30W), the system power is 110w in total (PoE max LED will be green if all PoE PDs power consumption is >= 110W). If there is an additional PD inserted to Port 4 with 20w then the system will cut off Port 5 to protect the system, this means Port 1, 2,3, will use 90w, and Port 4 will use 20w, and no power will be supplied to Port 5. Easy To Use TL-SG1016PE is easy to install and use. It requires no configuration or installation. With its Desktop/Rack mountable design, outstanding performance and quality, the TP-LINK TL-SG1016PE 16-Port Gigabit Desktop/Rack mountable Switch with 8-Port PoE is a great choice for expanding your home or office network.
See product
Pakistan (All cities)
Description: Details iShopping.pk brings you the best price for TP-Link 5-Port 10/100Mbps Desktop Switch with 4-Port PoE (TL-SF1005P) with express shipping all over Pakistan. Power over Ethernet 4 of the 5 Auto-Negotiation RJ45 ports (Port 1 to Port 4) of the switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af compliant Powered Devices (PDs). Overload Arrangement TL-SF1005P has the priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is >= 58W, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port. Port Priority Function Priority (port-1=port-2=port-3>port-4): This function will help to ensure the normal operation of the system, it means Port 4 will be cut off when all total PoE PDs power consumption exceed 58W. For an example, Port 1, 2 and 4 is using 15.4W (maximum power for per port is 15.4W); the system power is 46.2W in total. If there is an additional PD inserted to Port 3 with 12W, and then the system will cut off the power of Port 4 because of the overloaded power, this means Port 1, 2 will use 15.4W, and Port3 will use 12W, no power will be supplied to Port 4. Easy To Use TL-SF1005P is easy to install and use. It requires no configuration and installation. With desktop design, outstanding performance and quality, the TP-Link’s TL-SF1005P 5-Port 10/100Mbps Desktop Switch with 4-Port PoE is an ideal choice for expanding your home or office network. Specification: HARDWARE FEATURES Interface 5 10/100Mbps RJ45 Ports AUTO Negotiation/AUTO MDI/MDIX Network Media 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 100BASE-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Fan Quantity Fanless External Power Supply External Power Adapter(Output: 48VDC / 1.25A) PoE Ports (RJ45) Standard: 802.3 af compliant PoE Ports: Port1- Port4 Power Supply: 58W Mac Address Table 2K Switching Capacity 1Gbps Dimensions (W x D x H) 3.9 x 3.9 x 1.0 in. (99.8 x 98 x 25 mm) Transmission Distance Store-And-Forward Max Power Consumption 63.51W (max. with 58w PD connected) 1.70W (max. no PD connected) Max Heat Dissipation 5.73BTU/h(no PD connected) 221.17BTU/h(with 58W PD connected) SOFTWARE FEATURES Transmission Method Store-And-Forward Advanced Functions Compatible With IEEE 802.3af Compliant PDs Priority Function Mac Address Auto-Learning And Auto-Aging IEEE802.3x Flow Control For Full-Duplex Mode And Backpressure For Half-Duplex Mode OTHERS Certification FCC, CE, RoHS Package Contents TL-SF1005P, Power Adapter, User Guide Consumption 1.70 watts (max. no PD connected) 63.51 watts (max. with 58w PD connected) Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90%RH non-condensing Storage Humidity: 5%~90%RH non-condensing What This Product Does TL-SF1005P is a 5 10/100Mbps ports unmanaged switch that requires no configuration and provides 4 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc.
See product
Pakistan (All cities)
Description: Details iShopping.pk brings you the best price for TP-Link 5-Port 10/100Mbps Desktop Switch with 4-Port PoE (TL-SF1005P) with 18 months official warranty and express shipping all over Pakistan. Specification: HARDWARE FEATURES Interface 5 10/100Mbps RJ45 Ports AUTO Negotiation/AUTO MDI/MDIX Network Media 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 100BASE-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Fan Quantity Fanless External Power Supply External Power Adapter(Output: 48VDC / 1.25A) PoE Ports (RJ45) Standard: 802.3 af compliant PoE Ports: Port1- Port4 Power Supply: 58W Mac Address Table 2K Switching Capacity 1Gbps Dimensions (W x D x H) 3.9 x 3.9 x 1.0 in. (99.8 x 98 x 25 mm) Transmission Distance Store-And-Forward Max Power Consumption 63.51W (max. with 58w PD connected) 1.70W (max. no PD connected) Max Heat Dissipation 5.73BTU/h(no PD connected) 221.17BTU/h(with 58W PD connected) SOFTWARE FEATURES Transmission Method Store-And-Forward Advanced Functions Compatible With IEEE 802.3af Compliant PDs Priority Function Mac Address Auto-Learning And Auto-Aging IEEE802.3x Flow Control For Full-Duplex Mode And Backpressure For Half-Duplex Mode OTHERS Certification FCC, CE, RoHS Package Contents TL-SF1005P, Power Adapter, User Guide Consumption 1.70 watts (max. no PD connected) 63.51 watts (max. with 58w PD connected) Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90%RH non-condensing Storage Humidity: 5%~90%RH non-condensing Power over Ethernet 4 of the 5 Auto-Negotiation RJ45 ports (Port 1 to Port 4) of the switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af compliant Powered Devices (PDs). Overload Arrangement TL-SF1005P has the priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is >= 58W, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port. Port Priority Function Priority (port-1=port-2=port-3>port-4): This function will help to ensure the normal operation of the system, it means Port 4 will be cut off when all total PoE PDs power consumption exceed 58W. For an example, Port 1, 2 and 4 is using 15.4W (maximum power for per port is 15.4W); the system power is 46.2W in total. If there is an additional PD inserted to Port 3 with 12W, and then the system will cut off the power of Port 4 because of the overloaded power, this means Port 1, 2 will use 15.4W, and Port3 will use 12W, no power will be supplied to Port 4. Easy To Use TL-SF1005P is easy to install and use. It requires no configuration and installation. With desktop design, outstanding performance and quality, the TP-Link’s TL-SF1005P 5-Port 10/100Mbps Desktop Switch with 4-Port PoE is an ideal choice for expanding your home or office network.
See product
Pakistan (All cities)
Description: Details iShopping.pk brings you the best price for Dahua 10-Port Unmanaged Desktop Switch with 8-Port PoE (PFS3010-8ET-96) with 1 Year Official Warranty and express shipping all over Pakistan. Detail: Designed for commercial use, the DH-PFS3010-8ET-96 10-Port Fast Ethernet PoE+ Switch from Dahua comes with a total PoE power budget of up to 60W so you can plug PoE compliant devices to any of the eight Fast Ethernet PoE+ ports. Alongside the eight Fast Ethernet ports, you will find dual Gigabit Ethernet uplink ports to connect various network components directly to the switch. Once configured, the Dahua switch resides on Layer 2 of the network and supports a variety of network standards including 802.3, 802.3u, 802.3X, 802.3af, and 802.3at. Furthermore, this PoE switch is capable of transmitting power and data at distances of up to 820' to give you maximum flexibility when configuring your devices. • Layer 2 commercial switch • Long-distance PoE (LD PoE) transmits power and data 820' • Conforms to IEEE802.3, IEEE802.3u and IEEE802.3X • Conforms to IEEE802.3af and IEEE803.3at • Supports Hi-PoE (60W) • MAC auto-learning and aging; 16K MAC address capacity • MDI/MDIX self-adaptation • Metal enclosure Specifications: Hardware Ethernet Port 8 Optical Port 0 Ethernet Port Speed 100 Mbps Data Transmission Port Port 1–8: 8 × RJ-45 10/100 Mbps (PoE) Port 9-10: 2 × RJ-45 10/100/1000 Mbps (Uplink) Power Supply 53V DC Operaing Temperature –10°C to +55°C (+14°F to +131°F) Operating Humidity 5%–95% (RH) Storage Temperature –20°C to +70°C (–4°F to +158°F) Storage Humidity 5%RH–95%RH Power Consumption Idling: 3.0W Full load: 96W Performance Capacity 5.60 Gbps Packet Forwarding Rate 4.17 Mpps Packet Buffer Memory 4 Mbit MAC Table Size 8K Communication Standard IEEE802.3, IEEE802.3u, IEEE802.3X, IEEE 802.3ab PoE PoE Standard IEEE802.3af; IEEE802.3at; Hi-PoE; IEEE802.3bt PoE Power 96W Power Consumption Management Yes PoE Pin Assignment 1, 2, 4, 5 (V+), 3, 6, 7, 8 (V-) Long Distance PoE 250 m long distance PoE transmission General Statics Protection Air discharge: 8kV Contact discharge: 6kV Thunder-proof Common mode: 4kV Differential mode: 2kV
See product
Pakistan (All cities)
Description: Details iShopping.pk brings you the best price for TP-Link 10-Port Gigabit Smart PoE Switch with 1 SFP Slots (TL-SG1210P) with 18 months official warranty and express shipping all over Pakistan. Features: • 9 10/100/1000Mbps RJ45 ports, 1 Gigabit SFP port • With 8 PoE+ ports, transfers data and power on one single cable • Works with IEEE 802.3af/at compliant PDs and expands office network • 802.1p/DSCP QoS enable smooth latency-sensitive traffic • High PoE power budget with up to 30W for each PoE port and 63W for all PoE ports • Easy to use, with no configuration and installation needed Specifications: HARDWARE FEATURES Interface 8 PoE+ 10/100/1000Mbps RJ45 Ports 1 10/100/1000Mbps RJ45 Port 1 Gigabit SFP Slot Network Media 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 100BASE-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 1000BASE-X MMF, SMF Fan Quantity Fanless Physical Security Lock Yes Power Supply External Power Adapter(Output: 53.5VDC / 1.31A) Packet Forwarding Rate 14.88 Mpps PoE+ Ports(RJ45) Standard: 802.3at/802.3af compliant PoE Ports: Port1- Port 8 PoE Power Budget: 63W Mac Address Table 4K Jumbo Frame 16 KB Switching Capacity 20 Gbps Dimensions (W x D x H) 209 × 126 × 26 mm Max Power Consumption 7.11 W (220/50Hz. no PD connected) 78.13 W (220/50Hz. with 63W PD connected) Max Heat Dissipation 24.25 BTU/h (no PD connected) 266.42 BTU/h (with 63W PD connected) SOFTWARE FEATURES Advanced Features Compatible With IEEE 802.3af/at Compliant PDs EEE802.3x Flow Control 802.1p/DSCP QoS IGMP Snooping Transmission Method Store-And-Forward OTHERS Certification CE, FCC, RoHS Package Contents TL-SG1210P, Power Adapter, Installation Guide Environment Operating Temperature: 0°C~40°C (32°F~104°F) Storage Temperature: -40°C~70°C (-40°F~158°F) Operating Humidity: 10% ~ 90% non-condensing Storage Humidity: 5%~90% non-condensing Power over Ethernet Port 1-8 of the switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af/at compliant Powered Devices (PDs). Intelligent Power Management When total power consumption excels 63W, the intelligent power management will cut the lower priority port power off to ensure the high priority port’s power supply and protect the device from power overload operation. Sturdy Metal Casing Sturdy, compact metal casing, with desktop/wall-mounting design, to meet your needs in any environment. Besides, fanless design ensures quiet operation. Multiple Applications The benefits of PoE switches have become more evident with the rapid expansion of network-connected devices. They offer more effective solutions for connecting numerous PoE-compatible devices like VoIP, IP cameras, and access points—meeting the demands of most common business scenarios.
See product
Pakistan (All cities)
Product Description TP-LINK's 8-Port 10/100Mbps Desktop Switch With 4-Port PoE The 8-Port 10/100Mbps Desktop Switch with 4-Port PoE provides a seamless network connection. It integrates 100Mbps Fast Ethernet and 10Mbps Ethernet network capabilities. How This Product Works Four of the eight Auto-Negotiation RJ45 ports (port-1 to port-4) of the switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc. Overload Arrangement TL-SF1008P has the priority function, which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is greater than or equal to 53W, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port. Port Priority Function Priority (port-1>port-2>port-3>port-4): This function will help protect the system if the system power becomes overloaded. For example, Port 1, 2, and 4 are using 15.4w (maximum power per port is 15.4W), the system power is 46.2w in total (PoE max LED is red). If there is an additional PD inserted to Port 3 with 10w then the system will cut off Port 4 to protect the system; this means that Port 1 and 2 will use 15.4w, Port3 will use 10w, and no power will be supplied to Port 4. Easy To Use TL-SF1008P is easy to install and use. It requires no configuration and installation. With desktop design, outstanding performance, and quality, the TP-LINK TL-SF1008P8-Port 10/100Mbps Desktop Switch with 4-Port PoE is a great choice for expanding your home or office network. Package Contents TL-SF1008P switch Power cord Power adapter Installation guide
Rs 7.899
See product
Pakistan (All cities)
Specifications 1000Base-T PoE Interface 24 Combo 1000Base-T/SFP 4 Auto MDI/MDIX Yes 10/100/1000BASE-T PoE ports 24 Combo 10/100/1000BASE-T/SFP ports 4 Switch Capacity 56 Gbps Max. Packet Forwarding Rate 41.7 Mpps Store & Forwarding Forwading Yes Dimension 440mm x 250 mm x 44mm Weight 3.94 kg Operation Temperature -5 - 50°C Storage Temperature -20-70°C Operation Humidity 0% - 95% RH Storage Humidity 0% ~ 95% RH Operating Altitude 1500 meters Maximum Power Consumption PoE on 446.1 W/100 V 424.8 W/240 V PoE off 29.8 W/100 V 29.0 W/240 V Standby Power Consumption 18.5 W/100V / 17.1 W/240V Maximum Heat Dissipation 1521.99 BTU/hr (100 V) 1449.49 BTU/hr (240 V) MTBF 277,967 hours Power Input 100-240 VAC CPU Speed 500MHz Flash Memory Size 32MB Packet Buffer Size 4.1MBits DRAM Size DDR3 128MB FAN Yes Comply with RoHS 6 Yes Energy Efficiency Ethernet (EEE) Yes Power Saving By Link Status Yes Power Saving By Cable Length Yes Power Saving By Port Shut-Off Yes Power Saving By System Hibernation Yes Time-based PoE Yes Maximum PoE Budget 370W PoE Budget 370 W 802.3x Flow Control Yes Head-of-line (HOL) Blocking Prevention Yes MAC Address Table Size 8K 802.1D Spanning Tree (STP) Yes 802.1w Rapid Spanning Tree (RSTP) Yes 802.1s Multiple Spanning Tree (MSTP) Yes Root Restriction Yes 802.3ad Link Aggregation Yes Link Aggregation Group Per Device 4 Max Port Per Link Aggregation Group 8 Port Mirroring Yes Jumbo Frame 10,000 Bytes Loopback Detection (LBD) Yes IGMP Snooping Yes Max IGMP Snooping Groups 256 IGMP Snooping Fast Leave Yes MLD Snooping Yes MLD Snooping Groups Yes MLD Snooping Fast Leave Yes 802.1Q VLAN Yes VLAN Groups Yes Port-based VLAN Yes Voice VLAN Yes Auto Surveillance VLAN Yes Asymmetric VLAN Yes ARP Yes IP Interface Yes Max Number of IP Interface 4 ARP Entries Yes IPv6 Neighbor Discovery (ND) Yes ND Entries 128 Default Route Yes Static Route Yes Number of Queue Yes Class of Service (CoS) Yes Strict Priority Queue (SPQ) Yes Weighted Round Robin (WRR) Yes Port-based Bandwidth Control Yes Max Access Control List (ACL) Entries Yes MAC Access List Yes IP Access List Yes IPv6 Access List Yes SSH Yes SSL Yes (only support TLS 1.0) Port Security Yes Broadcast/Multicast/Unicast Storm Control Yes Traffic Segmentation Yes Smart IP-MAC-Port Binding (Smart IMPB) Yes D-Link Safeguard Engine Yes DHCP Server Screening Yes ARP Spoofing Prevention Yes DoS Attack Prevention Yes 802.1X Yes Port based 802.1X Authentication Yes Authentication for Management Access Yes RADIUS Yes Trusted Host Yes Cable Diagnostics Yes Simple Network Time Protocol (SNTP) Yes Web-based GUI Yes SNMP Yes SNMP Trap Yes Telnet Server Yes RMONv1 Yes TFTP Client Yes System Log Yes D-Link Discover Protocol (DDP) Yes (v0.26) LLDP-MED Yes LLDP Yes DHCP relay Yes DHCP/BootP Client Yes Dual Images Yes D-Link Network Assistant Yes (Chrome edition) Ping Yes Debug Command Yes Dual Configurations Yes Smart Wizard Yes
Rs 23.199
See product
Pakistan (All cities)
D-Link 5‑Port Desktop Gigabit Poe+ Switch 5x Gigabit Ethernet ports (4x PoE+ ports) PoE+, 60W power budget 10 Gbps switching fabric capacity Plug & Play simplicity for easy installation 2-Year D-Link Warranty 5x Gigabit Ethernet ports (4x PoE+ ports) PoE+, 60W power budget 10 Gbps switching fabric capacity Plug & Play simplicity for easy installation 2-Year D-Link Warranty Fast. Compact. Convenient. The D‑Link DGS‑1005P 5‑Port Desktop Gigabit PoE+ Switch enables you to connect Power over Ethernet (PoE) devices such as wireless access points (APs), network video cameras and IP phones to the network. Built with home and small business users in mind, the DGS‑1005P is compact and operates silently, making it ideal for most rooms and offices. Gigabit Performance. The DGS-1005P features plug-and-play installation and requires no configuration. Automatic MDI/MDI-X support on all ports removes the need for crossover cables when connecting to another switch, and auto-negotiation on each port intelligently adjusts the port speed for compatibility with the connected device. With wire-speed filtering and store-and-forward switching, the DGS-1005P maximises network performance while minimising the transmission of bad network packets. Power Over Ethernet+ The DGS-1005P features four Gigabit Ethernet ports that support the IEEE 802.3af and IEEE 802.3at PoE, supplying up to 30 W on each PoE port and providing a total power budget of 60 W. You can connect compatible devices to the DGS-1005P without using an additional power supply. This allows you to save on cabling and power supplies and to install devices on locations without immediate access to power outlets. Green Technolog The DGS-1005P features green technology such as IEEE 802.3az Energy-Efficient Ethernet (EEE), link status detection, and cable length detection. EEE adjusts the power consumption of the switch based on network utilisation, reducing energy use during periods of inactivity. Link status detection powers down unused ports, saving power when connected devices are shut down or disconnected. Cable length detection adjusts the power output of the port based on the cable length, reducing the power requirements of the switch. Compact and Silent The compact design of the DGS-1005P allows placement in most locations, including those where space is at a premium. The desktop form factor provides everything you need to set up a new network or expand an existing network, while the fanless design ensures silent operation even in noise-sensitive areas such as workstations and meeting rooms. Specs: Type Unmanaged Number of ports 5 ports Layer Layer 2 Main type of ports 1000BASE-T Gigabit Ethernet Switching capacity 10 Gbps PoE options 802.3af 802.3at Number of PoE ports 4 PoE power budget See datasheet Fanless 802.3az Energy-Efficient Ethernet support Form Factor Desktop Housing Metal Jumbo frame yes Cable diagnostics yes MAC address 2K
Rs 7.199
See product
Pakistan (All cities)
Product Description What This Product Does The TL-SG1008PE is an 8-port gigabit desktop/rack mountable switch with all 8 ports supporting the PoE+ standard. These PoE ports can automatically detect and supply power to those IEEE 802.3af/at compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable, allowing you to expand your network to where there are no power outlets and you wish to fix devices such as APs, IP Cameras or IP Phones, etc. Key Features 8 PoE Ports Equipped with 8 PoE ports with a total power budget of 124W, the TL-SG1008P can power up to eight 802.3af/at PoE compliant devices such as IP cameras, IP telephones or wireless access points. By delivering power over Ethernet, the TL-SG1008PE allows for flexible placement of network devices and eliminates the trouble and cost of extra wiring. Port Priority Protects Your Investment The priority of supplying power goes down from Port 1 to Port 8. This function will help protecting the system when system power becomes overloaded. For example, if port 1, 2, 4 and 7 are using 30W (maximum power per port is 30W), then the total power is 120W. And if there is an additional device inserted into port 3 at 25W, the system will cut off the power of port 7. As a result, port 1, 2 and 4 will use 30W, and port 3 will use 25W. No power will be supplied to port 7. Power Saving of up to 75% The TL-SG1008PE features innovative energy-efficient technologies that can automatically reduce power consumption by up to 75%. Diagnostic LED Indicators Diagnostic LED lights on the front panel display the information of power, link/activity, and speed - allowing you to quickly detect and correct problems on the network.
Rs 16.599
See product
Pakistan (All cities)
Product Description Product Description DGS-1008P 8-Port Gigabit Metal Desktop Switch with 4 PoE Ports View larger PoE View larger D-Link Green View larger DGS-1008P 8-Port Gigabit Metal Desktop Switch with 4 PoE Ports The DGS-1008P offers an economical way for SOHO and small to medium businesses (SMB) to benefit from the increased bandwidth of Gigabit Ethernet. It provides 8 Gigabit ports for fast server deployment to meet increasing network loads. The Gigabit PoE ports provide a larger bandwidth for high speed network applications, especially IEEE802.11n Access Points, high resolution video cameras, and phones. Gigabit Connection for Home The D-Link DGS-1008P 8-Port Gigabit PoE Unmanaged Desktop Switch enables home and office users to easily connect and supply power to Power over Ethernet (PoE) devices such as wireless access points (APs), IP cameras, and IP phones. It also provides the opportunity to add additional Ethernet devices like computers, printers, and Network Attached Storage (NAS) onto a network. This compact PoE switch operates quietly, making it ideal for use in virtually any room or office. Power Over Ethernet (PoE) The first four ports of the DGS-1008P support the IEEE 802.3af PoE protocol. Each of these four ports can supply up to 15.4 watts, for a total PoE budget of 52 watts, allowing users to attach an IEEE 802.3af-compliant device to the DGS-1008P that requires no additional power. Use PoE for applications that are far from power outlets or when you want to minimize the clutter of extra cables. Conserve Energy The DGS-1008P makes use of D-Link Green technology, providing energy savings, reduced power consumption, and a longer product life without sacrificing operational performance or functionality. This switch helps to conserve energy through methods such as Link Status and Cable Length Detection. The Link Status feature automatically powers down ports that have no link, allowing the switch to save substantial amounts of energy by cutting power for unused ports or ports connected to computers that have been shut down. It can also detect connected cable lengths, and adjust power usage accordingly, helping you save energy without affecting networking performance. In addition, the fanless design extends the product’s life and also reduces noise. Auto MDI/MDIX Crossover All ports support automatic MDI/MDIX crossover, eliminating the need for crossover cables or uplink ports. Each port can be plugged directly to a server, hub, router, or switch using regular straight-through twisted-pair Ethernet cables. Box Contains D-Link Switch Power Adapter User Documentation/Media
Rs 11.199
See product
Pakistan (All cities)
Description: Details iShopping.pk brings you the best price for D-Link 6-Port 10/100 Unmanaged PoE Switch (DES-F1006P-E) with express shipping all over Pakistan. Details: Long-Distance Transmission with Surge Protection With a connectivity range of 250 meters, the DES-F1006P-E is ideal for surveillance deployments, and compatible with Cat.5e or Cat.6 copper cable, while 6kV surge protection helps this device withstand power fluctuations and lightning strikes. Easy Deployment and PoE Convenience The DES-F1006P-E is a Plug-and-Play device that requires no configuration, so setup is simple and hassle-free. Easily connect multiple computers, share files, music, and video across your SOHO network, or even create a multiplayer gaming environment. 802.3x flow control on each port minimizes dropped packets when the port’s receiving buffer is full, giving a more reliable connection for all connected devices. The DES-F1006P-E also features four 10/100BASE-TX ports that support the IEEE 802.3af/at Power-over-Ethernet (PoE) protocol, supplying 15W each. Diverse Operating Modes The DES-F1006P-E switch has three operating modes. The default mode has a transmission distance of 100 meters. VLAN mode prevents against DHCP deception, broadcast storms, and virus attacks. Extend mode supports an extra-long transmission distance of 250 meters at 10Mbps, and Quality-of-Service (QoS) mode customizes application priorities for uses such as Video. Features: • 4 x 10/100 Mbps Fast Ethernet Ports • 2 x 10/100 Mbps Uplink Port • Power-over-Ethernet (60W) • Flow control for protection against data loss • Maximum distance of 250m • QoS Capabilities • Surge protection (6kV) • Operating Temperature: 0 to 40oC
See product
Pakistan (All cities)
Description: Details iShopping.pk brings you the best price for TP-Link PoE Splitter Adapter (TL-POE10R) with 18 months official warranty shipping all over Pakistan. Features: • IEEE 802.3af compliant • Selectable power output • Gigabit speed support • Plug-and-Play, requires no configuration • Delivers power up to 100 meters (328.1 feet) • Optional 12V DC 9V DC or 5V DC power supply Specification: HARDWARE Interface 2 10/100/1000Mbps RJ45 Port AUTO Negotiation/AUTO MDI/MDIX 1 POWER OUTPUT PORT Network Media 10BASE-T: UTP category 3, 4, 5 cable (Max 100m) EIA/TIA-568 100Ω STP (Max 100m) 100BASE-TX: UTP category 5, 5e cable (Max 100m) EIA/TIA-568 100Ω STP (Max 100m) 1000BASE-T: UTP category 5, 5e, 6 cable (Max 100m) Power Supply 12VDC 1A, 9VDC 1A, 5VDC 2A Basic Function Compatible With IEEE 802.3af Compliant PSEs Delivers Power Up To 100 Meters Optional 12VDC, 9VDC or 5VDC Power Output LED Indicator PWR Dimensions (W x D x H) 3.2*2.1*0.9 in.(80.8*54*24 mm) SOFTWARE Basic Function Compatible With IEEE 802.3af Compliant PSEs Delivers Power Up To 100 Meters Optional 12VDC, 9VDC or 5VDC Power Supply OTHERS Certification FCC, CE, RoHS System Requirements Microsoft® Windows® 98SE, NT, 2000, XP, Vista™ or Windows 7, MAC® OS, NetWare®, UNIX® or Linux. Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing What This Product Does The PoE Splitter TL-POE10R fully complies with IEEE 802.3af standard, and can work with all IEEE 802.3af PoE compliant PSE (Power Source Equipment) or PoE Supplier Adapter, such as TP-LINK's TL-SG3424P, TL-SF1008P or TL-POE150S, or other equivalent product, to deliver 12V, 9V or 5V Direct Current to where there are no power line or outlet, where you wish to fix device such as AP, IP Camera or IP Phone, etc. x
See product
Pakistan (All cities)
Description: Details iShopping.pk brings you the best price for TP-Link PoE Injector Adapter (TL-POE150S) with 18 months official warranty and express shipping all over Pakistan. Features: • IEEE 802.3af compliant • Auto-determine the necessary power requirements • Gigabit speed support • Plug-and-Play, requires no configuration • Delivers power up to 100 meters • External power adapter supply Specification: HARDWARE Interface 2 10/100/1000Mbps RJ45 Port AUTO Negotiation/AUTO MDI/MDIX 1 48VDC POWER INPUT PORT Network Media 10BASE-T: UTP category 3, 4, 5 cable (Max 100m) EIA/TIA-568 100Ω STP (Max 100m) 100BASE-TX: UTP category 5, 5e cable (Max 100m) EIA/TIA-568 100Ω STP (Max 100m) 1000BASE-T: UTP category 5, 5e, 6 cable (Max 100m) Power Supply 15.4W (Max. 48VDC) LED Indicator PWR Dimensions (W x D x H) 3.2*2.1*0.9 in.(80.8*54*24 mm) SOFTWARE Basic Function Compatible With IEEE 802.3af Compliant PDs Delivers Power Up To 100 Meters Auto-Determine The Necessary Power Requirements OTHERS Certification FCC, CE, RoHS System Requirements Microsoft® Windows® 98SE, NT, 2000, XP, Vista™ or Windows 7, MAC® OS, NetWare®, UNIX® or Linux. Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing What This Product Does The PoE Injector TL-POE150S fully complies with IEEE 802.3af standard, and can work with all IEEE 802.3af PoE compliant PDs (Powered Devices) or PoE Receiver Adapters, such as TP-LINK’s TL-POE10R, or other equivalent product, to expand your network to where there are no power line or outlet, where you wish to fix device such as AP, IP Camera or IP Phone, etc.
See product
Pakistan (All cities)
Original Ruckus POE Adapter. Ruckus PoE Adapter - Power Injector Supports 10-/100-/1000-Mbps data connections. Great for quick and efficient data transfers. LAN port: RJ-45 jack. PoE port: RJ-45 jack. Input 100-240V Output 48V DC, 0.5 Amp. Refurbished not New.
Rs 1.499
See product
Islamabad (Islamabad Capital Territory)
Onv 4 port Onv 8 port Onv 16 port Onv 24 port Poe switch available in best price r available al mehboob traders g 10
Rs 5.000
See product
Pakistan (All cities)
D-Link DAP-2680 AC1750 Wave 2 Dual‑Band WI-FI PoE Access Point 802.11ac Wave 2 wireless, up to 1.75 Gbps • MU-MIMO with beamforming • Band steering • Gigabit PoE-capable LAN port • AP Array utility support • Free D-Link Central WiFiManager AC1750 Wave 2 Wi-Fi 802.11ac Wave 2 wireless with combined speeds of up to 1.75 Gbps AC1750 Wave 2 Wi-Fi 802.11ac Wave 2 wireless with combined speeds of up to 1.75 Gbps Band steering Automatically steers traffic to the fastest, least congested band. MU-MIMO & Beamforming Allows multiple devices to connect simultaneously for improved efficiency. And creates highly-targeted Wi-Fi connections for superior Wi-Fi bandwidth. Smart, secure & green The wireless scheduler feature, which turns off wireless functionality when it isn’t needed, saves power and increases network security. Faster Wi‑Fi, Faster Business The DAP‑2680 Wireless AC1750 Wave 2 Dual‑Band PoE Access Point features cutting‑edge Wave 2 technology that brings greater speeds, efficiency, and security to your wireless customers. Perfect for small to medium business or enterprise environments. Be the best with Wave 2 Boost your business network to maximum wireless signal rates of up to 450 Mbps over the 2.4 GHz band, and 1300 Mbps over the 5 GHz band. Beamforming with MU‑MIMO Beamforming focuses the Wi-Fi signal to improve both range and connection strength so your clients can enjoy a superior Wi-Fi experience. Built-in Multiple-Input and Multiple-Output (MU-MIMO) technology gets high-bandwidth Wi-Fi signals to multiple devices simultaneously, for faster data distribution and efficiency. The Perfect Fit for Your Network Multiple operational modes allow you to select the DAP-2680 to operate as an access point, a Wireless Distribution System (WDS), a WDS with access point, or a wireless client. Business Quality of Service The Wi-Fi Multimedia (WMM) and Quality of Service (QoS) features make it an ideal access point for audio, video, and voice applications. When enabled, QoS allows the DAP-2680 to automatically prioritise network traffic. Customised priority rules can be adjusted through the web GUI. AP Load Balancing limits the maximum number of users per access point to ensure maximum performance. Easy‑mount setup It can be ceiling mounted, wall mounted or placed on a desk. Integrated 802.3at Power over Ethernet (PoE) enables the device to be deployed easily and in more areas, where power outlets are not readily available. Corporate‑Class Security Secure your business network with Personal and Enterprise versions WPA2 (802.11i), with support for RADIUS server backend or a built‑in internal RADIUS server. MAC address filtering, wireless LAN segmentation, SSID broadcast disable, rogue AP detection, and wireless broadcast scheduling further protect your wireless network. It supports up to eight VLANs per band, allowing multiple SSIDs to segment users. Includes a wireless client isolation mechanism, which limits direct client-to-client communication. Additionally, it supports Network Access Protection (NAP), a feature of Windows Server® 2008 and upwards, allowing network administrators to define multiple levels of network access based on an individual client’s needs. D‑Link WiFiManager Control from a central location up to a thousand access points anywhere in the world, with easy-to-use management controls. Reveal compelling insights into your business network, push out configurations and organise your network so it always runs at optimal performance.
Rs 19.300
See product
Pakistan (All cities)
Description: Details iShopping.pk brings you the best price for Ubiquiti PoE Network Adapter With LAN Port (POE-48-24W-G) with express shipping all over Pakistan. Features: Connectors 2 x RJ45 shielded ports Clamping Protection 11 V data, 60 V power Maximum Surge Discharge 1500 A (8/20 µS) power Peak Pulse Current 36 A (10/1000 µS) data Shunt Capacitance Response Time Powering 4-Pair: Pins 4, 5 (+) and pins 7, 8 (-) AC Connector IEC-320 C6 Switching Frequency 65 kHz Line Regulation ± 1% Load Regulation ± 3% Output Ripple 1% max Efficiency > 80% Inrush Current Input Current 0.6 A @ 120 VAC 0.4 A @ 240 VAC Input Voltage 90-260 VAC @ 47-63 Hz Output Voltage 48 VDC @ 0.5 A Operating Temperature 32 to 104°F (0 to 40°C) Storage Temperature -22 to 158°F (-30 to 70°C) Humidity (Non-Condensing) 35-95% Dimensions 3.61 x 2.36 x 1.3" (9.2 x 6 x 3.3 cm) Weight 5.6 oz (159 g)
See product
Pakistan
The POE-24-AF5X gigabit PoE adapter is designed to power AirFiber 5X devices. It can provide a voltage of 24V and up to 1A current. It has an LED indicating power supply. You may have to combine the adapter to the cable between radio and the network switch. 24VDC Output Voltage 90-260VAC @47-63Hz Input Voltage 0.3A @120VAC, 0.2A @230VAC Input Current 10/100 RJ45 LAN Port AC Power cord Avalaible at Dreams Network & Technology (Pvt) Ltd. Contact: LHR: 04235784892 KHI: 02134710763, 02134711677
See product
Pakistan (All cities)
Description: Details Network Switch Delivered All Over Pakistan iShopping.pk brings you the best price for Cisco 52 Port Gigabit Stackable Managed Switch (SG500-52-K9-CN) with express shipping all over Pakistan. Specifications: Enclosure Type Rack-mountable Maxiumum Storage Temperature 158 F Ports 48 x 10/100/1000 + 2 x combo Gigabit SFP + 2 x SFP Device Type Switch - 52 ports - managed - stackable Routing Protocol Static IP Routing Humidity Operating Range 10-90% (non-condensing) Minimum Storage Temperature -4 F Depth 10.1 inches Minimum Operating Temperature 32 F Interfaces 50 x 10Base-T/100Base-TX/1000Base-T - RJ-45, 4 x SFP (mini-GBIC) Humidity Storage Range 10-90% (non-condensing) Flash Memory 32 MB Maximum Operating Temperature 104 F Voltage Required AC 120/230 V (50/60 Hz) Power Device Power supply - internal Power Over Ethernet (PoE) n/a Status Indicators Port transmission speed, system, link/activity Ram 256 MB
See product
Pakistan (All cities)
· Built-in call recordings server; recordings accessible via web user interface · Built-in Call Detail Records (CDR) for tracking phone usage by line, date, etc. · Gigabit network ports with Integrates PoE, USB, SD card · Supports up to a 5-level IVR (Interactive Voice Response)
See product
Gujranwala (Punjab)
Quick Overview Cisco Catalyst 3750 Series switches are an innovative product line that improves LAN operating efficiency by combining industry-leading ease of use and the highest resiliency available for stackable switches.₨23,000.00http://www.refurbservers.pk/product/cisco-catalyst-3750-series-poe-ws-c3750-48ps-s-48-x-10100-4-x-gigabit-sfp-port/
Rs 23.000
See product
Pakistan (All cities)
Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 128V Audio DSP Mixer with express shipping all over Pakistan. The CONVERGE Pro 2 128V Audio DSP Mixer from ClearOne is a complete conferencing solution with 12 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in VoIP interface for 2 lines. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection. The mixer comes with built-in VoIP for VoIP conferencing. The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities. Features: Architecture • 12 mic/line inputs with AEC • Built-in VoIP for 2 lines • Built-in USB for PC-based conferencing Scalable Connectivity • Standalone and daisy-chained system • Stack up units up to 96 mic/line inputs • Expansion bus C-Link with 64 channels • P-Link bus to connect 6 peripherals Configuration & Management • CONSOLE software • Auto-discovery of devices • Matrix View for entire system • FlowView for visualized audio signal paths • System monitoring and troubleshooting Audio Signal Processing • Acoustic Echo Cancellation processing • Distributed Echo Cancellation on every mic input • Noise cancellation with Adaptive-Ambience • Acoustic Intelligence with faster convergence • DARE feedback elimination • Microphone gating Flexible Control Options • Dialer app for Windows, Mac, iOS, and Android • Tabletop controller with a touch panel • Wall controller with buttons • Web-based controller Supports 3rd-party control modules Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11 Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out: Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu REN: Ringer Equivalent Number 0.2 Transhybrid Balance: 30 dB (1 kHz, all AC terminations) VoIP Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation Audio: 5 lines (2 default + 3 lines through license), each line supporting 1+5 calls Sample Rate: 24 kHz Sample Bit Depth: 24-bit Codec: G.711 uLaw, G.711 ALaw, G.722 Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: Proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)
See product
Pakistan (All cities)
Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 48T Audio DSP Mixer with express shipping all over Pakistan. The CONVERGE Pro 2 48T Audio DSP Mixer from ClearOne is a complete conferencing solution with 4 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in Telco interface for teleconferencing. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection. The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities. Features: Architecture • 4 mic/line inputs with AEC • Built-in Telco with ClearEffect processing • Built-in USB for PC-based conferencing Scalable Connectivity • Standalone and daisy-chained system • Stack up units up to 96 mic/line inputs • Expansion bus C-Link with 64 channels • P-Link bus to connect 6 peripherals Configuration & Management • CONSOLE software • Auto-discovery of devices • Matrix View for entire system • FlowView for visualized audio signal paths • System monitoring and troubleshooting Audio Signal Processing • Acoustic Echo Cancellation processing • Distributed Echo Cancellation on every mic input • Noise cancellation with Adaptive-Ambience • Acoustic Intelligence with faster convergence • DARE feedback elimination • Microphone gating Flexible Control Options • Dialer app for Windows, Mac, iOS, and Android • Tabletop controller with a touch panel • Wall controller with buttons • Web-based controller • Supports 3rd-party control modules Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11 Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out: Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu REN: Ringer Equivalent Number 0.2 Transhybrid Balance: 30 dB (1 kHz, all AC terminations) Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Amplifier Output Speaker Output Port: Dual binding posts Audio: 2 x Channel Output Power: Maximum 10 W, 8 Ohms load Frequency Response: 20 Hz to 22 kHz @ +10 dBu, +/- 0.5 dBu THD + N: 20 Hz to 22 kHz @ +10 dBu, 1 W, Dynamic Range: 20 Hz to 22 kHz @ 20 dB, >102dB, with 20 kHz digital low pass filter Crosstalk: Channel to Channel, stimulus at 20 dBu, 10 W output to receptor 8⿦ load, 20 Hz to 22 kHz, Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)
See product
Pakistan (All cities)
Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 128T Audio DSP Mixer with express shipping all over Pakistan. The CONVERGE Pro 2 128T Audio DSP Mixer from ClearOne is a complete conferencing solution with 12 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in Telco interface for teleconferencing. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection. The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities. Features: Architecture 12 mic/line inputs with AEC Built-in Telco with ClearEffect processing Built-in USB for PC-based conferencing Scalable Connectivity Standalone and daisy-chained system Stack up units up to 96 mic/line inputs Expansion bus C-Link with 64 channels P-Link bus to connect 6 peripherals Configuration & Management CONSOLE software Auto-discovery of devices Matrix View for entire system FlowView for visualized audio signal paths System monitoring and troubleshooting Audio Signal Processing Acoustic Echo Cancellation processing Distributed Echo Cancellation on every mic input Noise cancellation with Adaptive-Ambience Acoustic Intelligence with faster convergence DARE feedback elimination Microphone gating Flexible Control Options Dialer app for Windows, Mac, iOS, and Android Tabletop controller with a touch panel Wall controller with buttons Web-based controller Supports 3rd-party control modules Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11 Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out: Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu REN: Ringer Equivalent Number 0.2 Transhybrid Balance: 30 dB (1 kHz, all AC terminations) Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: Proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)
See product
-
Next →