Port fiber

Ubiquity Networks ES-12F Managed Gigabit Backbone Fiber Switch 12 Gigabit SFP Ports and 4 Gigabit RJ45 Ports 16 Gbps Non-Blocking Throughput with 32 Gbps Total Switching Capacity Gigabit Connectivity For fiber connectivity, the EdgeSwitch Fiber features 12 SFP ports, eight of which also support 100 Mbps. For copper connectivity, the EdgeSwitch Fiber offers four Gigabit RJ45 ports. Powerful Switching Performance The EdgeSwitch Fiber offers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss. For its total, non‑blocking throughput, the EdgeSwitch Fiber supports up to 16 Gbps. Advanced Enterprise Switching The EdgeSwitch Fiber uses a sophisticated operating system that provides advanced switching features, including VLAN tagging and link aggregation, and limited layer-3 features, including static routing and DHCP server functionality.

Description: Details iShopping.pk brings you the best price for D-Link 10/100Base-TX to 100Base-FX Single-mode Fiber (SC) Media Converter (DMC-920T/E) with express shipping all over Pakistan.   Specifications: LED Indicators Power 100Mbps Speed (for twisted-pair port) Full Duplex/Collision (for twisted-pair and fiber ports) LINK/ACT (for twisted-pair port) Dimensions 120 x 88 x 25 mm Power Input 7.5V 1.5A Through external AC power adapter Operation Temperature 0° – 40° C Storage Temperature -25° – 70° C Humidity 10 ~ 90% non-condensing Emission (EMI) FCC Class B VCCI Class B CE Class B C-Tick   Details: This media Converter combines transmit and receive signals onto one fibre strand using two wavelengths. This design avoids the budget losses incurred by the single-wavelength single-fiber technology and minimizes the possibility of reflections in the system. The units on both ends of a link are different. One module uses one wavelength to transmit and a second wavelength to receive, while the other module flips that relationship. For this reason, these units are used in pairs. A pair of a one-channel single fiber is used for media conversion between 10/100BASE-TX and 100BASE-FX. Two different transmitting wavelengths, one wavelength with bi-directional for both transmit and receive. – DMC-920R: This media converter provides 1310 micron for TX, 1550 micron for RX. – DMC-920T: This media converter provides 1550 micron for TX, 1310 micron for RX. Fiber cable support is 9/125um, 10/125um single-mode fiber, maximum 20 km cable distance

1. support the transition between 10 / 100Base-TX and 100Base-FX.2 * 155 Gbps full-duplex fiber ports and 4 * 100M Ethernet ports with auto-negotiation function.2. support 100M speed rate, MDI / MDIX and half / full-duplex with auto-negotiation function. Each port has the complete LED Indicator light3. support single mode single fiber, single mode dual fiber, multi-mode dual fiber and SFP slot. Support IEEE802.1d Spanning Tree4. Support high performance QoS function on each port. Support 5 V input voltage. Support IEEE 802.3x flow control and back pressure control

Description: Details iShopping.pk brings you the best price for D-Link 2 Port 100Base-TX to 100Base-FX Multi-mode Fiber (SC) Media Converter (DMC-300MSC) with express shipping all over Pakistan.   Specifications:   Number of Ports 1 x 10/100BASE-TX RJ-45 port 1 x 100BASE-FX SC port Standards IEEE 802.3 for 10BASE-T/F IEEE 802.3u for 100BASE-TX/FX Data Transfer Rate Ethernet: 10 Mbps/20 Mbps (half-duplex/full-duplex) Fast Ethernet: 100 Mbps/200 Mbps (half-duplex/full-duplex) Duplex Mode Half-duplex/full-duplex Media Types 10BASE-T: 2-pair Cat. 3/4/5/5e, Unshielded Twisted Pair (UTP) (up to 100 m) 10/100BASE-TX: 2-pair Cat. 5/5e, Unshielded Twisted Pair (UTP) (up to 100 m) 100BASE-FX: Multi-mode fi   e optic cable with SC connector (up to 2 km) Media Exchange Interface Auto-MDI/MDIX Transmission Mode Store-and-forward Forwarding Rate Full wire-speed forwarding rate Diagnostic LEDs Power Speed (for twisted pair ports) Full-duplex/Collision  LINK/ACT (for twisted pair ports) AC Input 5 V/1 A external power adapter  

DESCRIPTION Huawei HG 8546M XPON Fiber Optic Router New box With Adapter XPON EPON GPON Terminal 1*GE+3*FE+1*POTS+ 1*USB+ WIFI, Connector type SC/UPC XPON port: Class B+ Module Antenna gain: 5dBi Can be configured by OLT or Web or NMS HG8546M coming with English GUI Suitable for home and SOHO users Packing dimension: 176*138.5*28mm 8546m HG8546 8546 Optical Network cash one Delivery Available for All Pakistan عدن کمیونیکیشن کلیارچوک جرنیلی روڈکندیاں میانوالی, Kundian, Mianwali, Punjab, Pakistan

BT HOME HUB 2.0A DSL wirless router Wifi 802.11 b/g/n. EXCELLENT wireless range Fully supports dsl, copper and fiber. VOIP functionality. Save voip settings in router and use a land-line phone to receive VOIP calls directly.(without use of computer) Can connect USB flash drive hard disk and content can be shared across all connected devices. Can also share printer via usb port. Beautiful Design and Shape Note: This device will connect to any ISP in Pakistan.Other devices selling on web cannot run in pakistan's ISP b/c they are locked only serious buyers, only call no sms G-13/2, St# 52 Islamabad

• All-in-one VDSL2 modem, Wireless router, and Ethernet switch. •802.11b/g/n wireless compliant with speeds up to 300 Mbps • 5dBi antennas for better overall wireless coverage • 4x 10/100 Fast Ethernet ports Supports VDSL and ADSL with Annex A/L/M standards • USB 2.0 port supports 3G USB Modem • Parental controls • Quality of Service (QoS) traffic prioritization • Dynamic DNS (DDNS

DESCRIPTION XPON EPON GPON Terminal 1*GE+3*FE+1*POTS+ 1*USB+ WIFI, Connector type SC/UPC XPON port: Module Antenna gain: 5dBi big antenna HG8546M coming with English b'&' latest Blue software Suitable for home and SOHO users Packing dimension: 176*138.5*28mm HG8546m Optical Network عدن کمیونیکیشن کلیارچوک جرنیلی روڈکندیاں میانوالی, Kundian, Mianwali, Punjab, Pakistan

· FastEthernet · Auto-MDI/MDIX · Externalpoweradapter · Store-and-forward Transmission

· TransmissionMode: Store-and-forward · MediaExchangeInterface: Auto-MDI/MDIX · NumberofPorts: 1x10/100BASE-TXRJ-45port · NumberofPorts: 1x100BASE-FXSCport

Description: Details iShopping.pk brings you the best price for TP-Link 10/100Mbps WDM Media Converter (MC111CS) with express shipping all over Pakistan.   Specification: MEDIA CONVERTER & MODULE Standards and Protocols IEEE 802.3, IEEE 802.3u Basic Function Adopts WDM technology Half/Full-Duplex transfer mode for FX port minimize the loss caused by link failure timely Extends fiber distance up to 20km (12.5 miles) Ports 1 x 100M SC/UPC port 1 x 10/100M RJ45 port (Auto MDI/MDIX) Wave Length 1550nm Tx/1310nm Rx WDM TX 1550nm WDM RX 1310nm Network Media 10BASE-T UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Network Media 100BASE-T UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Network Media 100BASE-FX Single-mode Fiber LED Indicators PWR, Link/Act Dimensions (W*D*H) 3.7 x 2.9 x 1.1 in. (95 x 73 x 27 mm) Power Supply External Power Adapter Max Power Consumption 2.49W Safety & Emission FCC, CE, RoHS Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing   What This Product Does The MC111CS is a media converter designed to convert 100BASE-FX fiber to 10/100Base-TX copper media or vice versa. Adopting WDM technology, MC111CS takes only one fiber cable to transmit and receive data, which will half cable cost for you. Designed with IEEE 802.3u 100Base-TX and 100Base-FX standards, the MC111CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC111CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1550nm on transferring data and at 1310nm on receiving data. So the other end device to cooperate with the MC111CS should work at 1310nm on transferring data and at 1550nm on receiving data. Another TP-LINK´s media converter MC112CS is just one of the examples to cooperate with MC111CS. Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, and front panel status LEDs. The MC111CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers(12.5 miles).

Description: Details iShopping.pk brings you the best price for TP-Link 10/100Mbps WDM Media Converter (MC112CS) with 18 months official warranty express shipping all over Pakistan.   Specification: MEDIA CONVERTER & MODULE Standards and Protocols IEEE 802.3, IEEE 802.3u Basic Function Adopts WDM technology Half/Full-Duplex transfer mode for FX port minimize the loss caused by link failure timely Extends fiber distance up to 20km Ports 1 x 100M SC/UPC port 1 x 10/100M RJ45 port (Auto MDI/MDIX) Wave Length 1310nm Tx/1550nm Rx WDM TX 1310nm WDM RX 1550nm Network Media 10BASE-T UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Network Media 100BASE-T UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Network Media 100BASE-FX Single-mode Fiber LED Indicators PWR, Link/Act Dimensions (W*D*H) 3.7 x 2.9 x 1.1 in. (95 x 73 x 27 mm) Power Supply External Power Adapter Max Power Consumption 2.41W Safety & Emission FCC, CE, RoHS Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing   What This Product Does The MC112CS is a media converter designed to convert 100BASE-FX fiber to 10/100Base-TX copper media and vice versa. Adopting WDM technology, MC112CS takes only one fiber cable to transmit and receive data, which will save half cabling cost for you. Designed under IEEE 802.3u 100Base-TX and 100Base-FX standards, the MC112CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC112CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on transferring data and at 1550nm on receiving data. So the other end device to cooperate with the MC112CS should work at 1550nm on transferring data and at 1310nm on receiving data. Another TP-Link´s media converter MC111CS is just one of the examples to cooperate with MC112CS. Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port. The MC112CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers (12.5 miles).

Description: Details iShopping.pk brings you the best price for TP-Link 10/100Mbps WDM Media Converter (MC112CS) with express shipping all over Pakistan.   Specification: MEDIA CONVERTER & MODULE Standards and Protocols IEEE 802.3, IEEE 802.3u Basic Function Adopts WDM technology Half/Full-Duplex transfer mode for FX port minimize the loss caused by link failure timely Extends fiber distance up to 20km Ports 1 x 100M SC/UPC port 1 x 10/100M RJ45 port (Auto MDI/MDIX) Wave Length 1310nm Tx/1550nm Rx WDM TX 1310nm WDM RX 1550nm Network Media 10BASE-T UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Network Media 100BASE-T UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Network Media 100BASE-FX Single-mode Fiber LED Indicators PWR, Link/Act Dimensions (W*D*H) 3.7 x 2.9 x 1.1 in. (95 x 73 x 27 mm) Power Supply External Power Adapter Max Power Consumption 2.41W Safety & Emission FCC, CE, RoHS Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing   What This Product Does The MC112CS is a media converter designed to convert 100BASE-FX fiber to 10/100Base-TX copper media and vice versa. Adopting WDM technology, MC112CS takes only one fiber cable to transmit and receive data, which will save half cabling cost for you. Designed under IEEE 802.3u 100Base-TX and 100Base-FX standards, the MC112CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC112CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on transferring data and at 1550nm on receiving data. So the other end device to cooperate with the MC112CS should work at 1550nm on transferring data and at 1310nm on receiving data. Another TP-Link´s media converter MC111CS is just one of the examples to cooperate with MC112CS. Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port. The MC112CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers (12.5 miles).

Description: Details iShopping.pk brings you the best price for TP-Link Gigabit Multi-Mode Media Converter (MC200CM) with 18 months official warranty and express shipping all over Pakistan.   Specification: MEDIA CONVERTER & MODULE Standards and Protocols IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z Basic Function Auto-negotiation of Half-Duplex / Full-Duplex transfer mode Extends fiber distance up to 1,800 feet (550m) using 50/125um fiber Extends fiber distance up to 720 feet (220m) using 62.5/125um fiber Ports 1 x 1000M SC/UPC port 1 x 10/100/1000M RJ45 port (Auto MDI/MDIX) Wave Length 850nm Network Media 1000BASE-SX Multi-mode Fiber Network Media 1000BASE-T UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) LED Indicators PWR, Link/Act Dimensions (W*D*H) 3.7 × 2.9 × 1.1 in. (95 × 73 × 27 mm) Power Supply External Power Adapter Max Power Consumption 1.66W Safety & Emission FCC, CE, RoHS Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing   What This Product Does The MC200CM is a media converter designed to convert 1000BASE-SX fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-SX standards, the MC200CM is designed for use with multi-mode fiber cable utilizing the SC-Type connector. The MC200CM supports shortwave (SX) laser specification at a full wire speed forwarding rate. It works at 850nm on both transmitting and receiving data  Auto MDI/MDI-X for TX port, and front panel status LEDs. The MC200CM will transmit at extended fiber optic distances utilizing multi-mode fiber up to 1,800 feet (550 meters).

Description: Details iShopping.pk brings you the best price for TP-Link Gigabit Multi-Mode Media Converter (MC200CM) with express shipping all over Pakistan.   Specification: MEDIA CONVERTER & MODULE Standards and Protocols IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z Basic Function Auto-negotiation of Half-Duplex / Full-Duplex transfer mode Extends fiber distance up to 1,800 feet (550m) using 50/125um fiber Extends fiber distance up to 720 feet (220m) using 62.5/125um fiber Ports 1 x 1000M SC/UPC port 1 x 10/100/1000M RJ45 port (Auto MDI/MDIX) Wave Length 850nm Network Media 1000BASE-SX Multi-mode Fiber Network Media 1000BASE-T UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) LED Indicators PWR, Link/Act Dimensions (W*D*H) 3.7 × 2.9 × 1.1 in. (95 × 73 × 27 mm) Power Supply External Power Adapter Max Power Consumption 1.66W Safety & Emission FCC, CE, RoHS Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing   What This Product Does The MC200CM is a media converter designed to convert 1000BASE-SX fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-SX standards, the MC200CM is designed for use with multi-mode fiber cable utilizing the SC-Type connector. The MC200CM supports shortwave (SX) laser specification at a full wire speed forwarding rate. It works at 850nm on both transmitting and receiving data  Auto MDI/MDI-X for TX port, and front panel status LEDs. The MC200CM will transmit at extended fiber optic distances utilizing multi-mode fiber up to 1,800 feet (550 meters).

Description: Details iShopping.pk brings you the best price for TP-Link 10/100Mbps Single-Mode Media Converter (MC110CS) with official warranty and express shipping all over Pakistan.   Specification: MEDIA CONVERTER & MODULE Standards and Protocols IEEE 802.3, IEEE 802.3u, IEEE 802.3x Basic Function Half/Full-Duplex transfer mode for FX port Full Duplex Flow Control (IEEE 802.3x) Half Duplex Flow Control (Backpressure) Extends fiber distance up to 12.5 miles (20km) Ports 1 100M SC/UPC port 1 10/100M RJ45 port (Auto MDI/MDIX) Wave Length 1310nm Network Media 10BASE-T UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Network Media 100BASE-T UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Network Media 100BASE-FX Single-mode Fiber LED Indicators PWR, Link/Act Dimensions (W*D*H) 3.7 × 2.9 × 1.1 in. (95 × 73 × 27 mm) Power Supply External power supply Max Power Consumption 2.4W Safety & Emission FCC, CE, RoHS Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing   What This Product Does The MC110CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media and vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC110CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC110CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data. Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode. The MC110CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 12.5 miles (20km).

Description: Details iShopping.pk brings you the best price for TP-Link 10/100Mbps Single-Mode Media Converter (MC110CS) with express shipping all over Pakistan.   Specification: MEDIA CONVERTER & MODULE Standards and Protocols IEEE 802.3, IEEE 802.3u, IEEE 802.3x Basic Function Half/Full-Duplex transfer mode for FX port Full Duplex Flow Control (IEEE 802.3x) Half Duplex Flow Control (Backpressure) Extends fiber distance up to 12.5 miles (20km) Ports 1 100M SC/UPC port 1 10/100M RJ45 port (Auto MDI/MDIX) Wave Length 1310nm Network Media 10BASE-T UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Network Media 100BASE-T UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Network Media 100BASE-FX Single-mode Fiber LED Indicators PWR, Link/Act Dimensions (W*D*H) 3.7 × 2.9 × 1.1 in. (95 × 73 × 27 mm) Power Supply External power supply Max Power Consumption 2.4W Safety & Emission FCC, CE, RoHS Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing   What This Product Does The MC110CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media and vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC110CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC110CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data. Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode. The MC110CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 12.5 miles (20km).

Description: Details iShopping.pk brings you the best price for TP-Link 300Mbps Wireless N VDSL/ADSL Modem Router (TD-W9960) with express shipping all over Pakistan.   Features: • Versatile Connectivity - With DSL and LAN / WAN ports, the TD-W9960 is fully compatible with the VDSL2 / ADSL2 + / ADSL2 / ADSL standards and also works with fiber / cable access. • Boosted Speeds - Superfast VDSL broadband speeds of up to 100Mbps together with 300Mbps Wi-Fi. • Maximized Range - Powerful external antennas provide far-reaching wireless coverage in every direction. • Effortless Management - Set up in minutes with the powerful Tether app or intuitive web interface and manage the network from anywhere   Specification: HARDWARE Interface 3 10 / 100Mbps RJ45 LAN Ports  1 10 / 100Mbps RJ45 LAN / WAN Port  1 RJ11 Port Buttons WPS Button  RESET Button  Power ON / OFF Button External power supply 9VDC / 0.6A IEEE Standards IEEE 802.3, 802.3u VDSL2 Standards ITU-T G.993.2  ITU-T G.993.5 (G.vector)  ITU-T G.998.4 (G.INP) Dimensions (WxDxH) 181.6 * 129.7 * 36.2mm Antenna type Omni directional, Fixed Antenna gain 2 x 5dBi WIRELESS MODULE SETTINGS Wireless Networking Standards IEEE 802.11b, 802.11g, 802.11n Frequency range (reception and transmission) 2.400-2.4835GHz EIRP (Wireless signal power) Wireless Security 64/128-bit WEP, WPA / WPA2, WPA-PSK / WPA-PSK2  encryptions, Wireless MAC Filtering CHARACTERISTICS OF THE SOFTWARE QoS (data prioritization) WMM, Bandwidth Control (IP QoS) Security NAT Firewall, SPI Firewall, Denial of Service (DoS), SYN Flooding, Ping of Death, Access Control, Service Filtering, IP and MAC Address Binding Operating modes VDSL / ADSL Modem Router, Wireless Router, Control Web Based Configuration (HTTP), Remote Management, CWMP (TR-069), Web Based Firmware Upgrade, Diagnostic Tools Port Forwarding Virtual Server, Port Triggering, DMZ, ALG, UPnP VPN traffic skip IPSec VPN Protocols Supports IPv4 and IPv6 ATM / PPP protocols PPPoE (RFC2516)  PPPoA (RFC 2364)  MER / IPoE (RFC 1483 Routed)  IPoA (RFC1577 / 2225)  Bridge (RFC1483 Bridge) Additional Features Parental Controls, Network Address Translation (NAT), Port Mapping (Grouping), Static Routing, RIP v1 / v2 (optional), DNS Relay, DDNS, IGMP V1 / V2 / V3 APP Tether App OTHER Certification CE, RoHS System requirements Microsoft Windows 98SE, NT, 2000, XP, Vista ™ or Windows 7, 8, 8.1, 10,  the Mac OS, the NetWare, the UNIX or the Linux  of Internet Explorer 11, of Firefox 12.0, the Chrome 20.0, the Safari 4.0, or OTHER  the Java-the enabled browser  the Subscription With an internet service provider (for internet access) Environmental parameters Operating Temperature: 0 ℃ ~ 40 ℃ (32℉ ~ 104℉  Storage ) Storage Temperature: -40 ℃ ~ 70 ℃ (-40℉ ~ 158℉)  Operating Humidity: 10% ~ 90% non-condensing  Storage Humidity: 5% ~ 90 % Non-condensing   Intended use of the device TD-W9960 from TP-Link supports the new standard ITU-T G.993.2 VDSL2, which provides incoming and outgoing streams up to 100 Mbps. The device is compatible with ADSL, fiber optic and cable modem. Due to the speed of Wi-Fi up to 300 Mbps on 2.4 GHz, the TD-W9970 is an excellent choice for users who need high-quality HD video, online games and resource-intensive tasks without delays.   Switchable LAN / WAN port - compatible with cable / fiber optic modems The TD-W9970 supports connection over VDSL / ADSL or Ethernet WAN (EWAN), which provides flexible access to the Internet. With the switchable LAN / WAN port, the device is compatible with cable and fiber-optic modems. This unique feature is especially useful when users want to switch from VDSL / ADSL to fiber or cable.   Broadband connection up to 100 Mbps The TD-W9970 supports VDSL2, is backwards compatible with ADSL2 + / ADSL2 / ADSL and provides up to 100 Mbps throughput. It is designed for simultaneous transmission of voice and video, data, HDTV stream and online games.

Description: Details iShopping.pk brings you the best price for TP-Link Gigabit Single-Mode Media Converter (MC210CS) with express shipping all over Pakistan.   Specification: MEDIA CONVERTER & MODULE Standards and Protocols IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z Basic Function Extends fiber distance up to 9.3 miles (15km) Ports 1 x 1000M SC/UPC port 1 x 10/100/1000M RJ45 port (Auto MDI/MDIX) Wave Length 1310nm Network Media 1000BASE-LX Single-mode Fiber Network Media 1000BASE-T UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) LED Indicators PWR, Link/Act Dimensions (W*D*H) 3.7 × 2.9 × 1.1 in. (95 × 73 × 27 mm) Power Supply External Power Adapter Max Power Consumption 1.8W Safety & Emission FCC, CE, RoHS Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing   What This Product Does The MC210CS is a media converter designed to convert 1000BASE-LX fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-LX standards, the MC210CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC210CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data. Auto MDI/MDI-X for TX port, and front panel status LEDs. The MC210CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 9.3 miles (15km).

Description: Details iShopping.pk brings you the best price for TP-Link 10/100Mbps Multi-Mode Media Converter (MC100CM) with 18 months official warranty and express shipping all over Pakistan.   Specification: MEDIA CONVERTER & MODULE Standards and Protocols IEEE 802.3, IEEE 802.3u, IEEE 802.3x Basic Function Auto-negotiation of Half-Duplex / Full-Duplex transfer mode Full Duplex Flow Control (IEEE 802.3x) Half Duplex Flow Control (Backpressure) Extends fiber distance up to 1.2 miles (2km) Ports 1 100M SC/UPC port 1 10/100M RJ45 port (Auto MDI/MDIX) Wave Length 1310nm Network Media 10BASE-T UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Network Media 100BASE-T UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Network Media 100BASE-FX Multi-mode Fiber LED Indicators PWR, Link/Act Dimensions (W*D*H) 3.7 × 2.9 × 1.1 in. (95 × 73 × 27 mm) Power Supply External power supply Max Power Consumption 2.4W Safety & Emission FCC, CE, RoHS Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing   What This Product Does The MC100CM is a media converter designed to connect 100BASE-FX fiber to 100Base-TX copper and vice versa. Complies with IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC100CM is designed using multi-mode fiber cable with an SC-Type terminal for physical connections. The MC100CM supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data. Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode for flexibility. The MC100CM will transmit at extended fiber optic distances utilizing multi-mode fiber up to 1.2 miles (2km).

Description: Details iShopping.pk brings you the best price for TP-Link 10/100Mbps Multi-Mode Media Converter (MC100CM) with express shipping all over Pakistan.   Specification: MEDIA CONVERTER & MODULE Standards and Protocols IEEE 802.3, IEEE 802.3u, IEEE 802.3x Basic Function Auto-negotiation of Half-Duplex / Full-Duplex transfer mode Full Duplex Flow Control (IEEE 802.3x) Half Duplex Flow Control (Backpressure) Extends fiber distance up to 1.2 miles (2km) Ports 1 100M SC/UPC port 1 10/100M RJ45 port (Auto MDI/MDIX) Wave Length 1310nm Network Media 10BASE-T UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Network Media 100BASE-T UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Network Media 100BASE-FX Multi-mode Fiber LED Indicators PWR, Link/Act Dimensions (W*D*H) 3.7 × 2.9 × 1.1 in. (95 × 73 × 27 mm) Power Supply External power supply Max Power Consumption 2.4W Safety & Emission FCC, CE, RoHS Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing   What This Product Does The MC100CM is a media converter designed to connect 100BASE-FX fiber to 100Base-TX copper and vice versa. Complies with IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC100CM is designed using multi-mode fiber cable with an SC-Type terminal for physical connections. The MC100CM supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data. Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode for flexibility. The MC100CM will transmit at extended fiber optic distances utilizing multi-mode fiber up to 1.2 miles (2km).

Description: Details iShopping.pk brings you the best price for TP-Link Gigabit Ethernet Media Converter (MC220L) with 18 months official warranty and express shipping all over Pakistan.   Specification: MEDIA CONVERTER & MODULE Standards and Protocols IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x Basic Function Full Duplex Flow Control (IEEE 802.3x) Extends fiber distance up to 0.5km for multi-mode fiber or up to 10km with single-mode fiber Ports 1 x Gigabit SFP port 1 x 10/100/1000M RJ45 port (Auto MDI/MDIX) Wave Length Depends on the used SFP module Network Media 1000BASE-X Multi-mode/Single-mode SFP module Network Media 1000BASE-T UTP category 5, 5e, 6 cable (maxium 100m) EIA/TIA-568 100Ω STP (maximum 100m) LED Indicators PWR, Link/Act Dimensions (W*D*H) 3.7 x 2.9 x 1.1 in. (94 x 73 x 27 mm) Power Supply External Power Adapter Max Power Consumption 1.7 W Safety & Emission FCC, CE, RoHS Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing   What This Product Does The MC220L is a media converter designed to convert 1000BASE-SX/LX fiber to 10/100/1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T standards, the MC220L communicates with any TP-Link standard gigabit SFP fiber module.

Description: Details iShopping.pk brings you the best price for TP-Link Gigabit Ethernet Media Converter (MC220L) with express shipping all over Pakistan.   Specification: MEDIA CONVERTER & MODULE Standards and Protocols IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x Basic Function Full Duplex Flow Control (IEEE 802.3x) Extends fiber distance up to 0.5km for multi-mode fiber or up to 10km with single-mode fiber Ports 1 x Gigabit SFP port 1 x 10/100/1000M RJ45 port (Auto MDI/MDIX) Wave Length Depends on the used SFP module Network Media 1000BASE-X Multi-mode/Single-mode SFP module Network Media 1000BASE-T UTP category 5, 5e, 6 cable (maxium 100m) EIA/TIA-568 100Ω STP (maximum 100m) LED Indicators PWR, Link/Act Dimensions (W*D*H) 3.7 x 2.9 x 1.1 in. (94 x 73 x 27 mm) Power Supply External Power Adapter Max Power Consumption 1.7 W Safety & Emission FCC, CE, RoHS Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing   What This Product Does The MC220L is a media converter designed to convert 1000BASE-SX/LX fiber to 10/100/1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T standards, the MC220L communicates with any TP-Link standard gigabit SFP fiber module.

TP-LINK MC200CM Gigabit Multi-Mode Media Converter Price in Pakistan MEDIA CONVERTER & MODULE Standards and Protocols IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z Basic Function Auto-negotiation of Half-Duplex / Full-Duplex transfer mode Extends fiber distance up to 1,800 feet (550m) using 50/125um fiber Extends fiber distance up to 720 feet (220m) using 62.5/125um fiber Ports 1 x 1000M dual SC/UPC port 1 x 10/100/1000M RJ45 port (Auto MDI/MDIX) Wave Length 850nm Network Media 1000BASE-SX Multi-mode Fiber Network Media 1000BASE-T UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100O STP (maximum 100m) LED Indicators PWR, Link/Act Dimensions (W*D*H) 3.7 × 2.9 × 1.1 in. (95 × 73 × 27 mm) Power Supply External Power Adapter Max Power Consumption 1.66W Safety & Emission FCC, CE, RoHS Package Contents • Media Converter MC200CM • Power Adapter • Installation Guide Environment Operating Temperature: 0?~40? (32?~104?) Storage Temperature: -40?~70? (-40?~158?) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing

Description: Details iShopping.pk brings you the best price for D-Link Single-Mode Media Converter (DMC-920T/E) with express shipping all over Pakistan.   Specifications: LED Indicators Power 100Mbps Speed (for twisted-pair port) Full Duplex/Collision (for twisted-pair and fiber ports) LINK/ACT (for twisted-pair port) Dimensions 120 x 88 x 25 mm Power Input 7.5V 1.5A Through external AC power adapter Operation Temperature 0° – 40° C Storage Temperature -25° – 70° C Humidity 10 ~ 90% non-condensing Emission (EMI) FCC Class B VCCI Class B CE Class B C-Tick   Details: This media converter combines transmit and receive signals onto one fibre strand using two wavelengths. This design avoids the budget losses incurred by the single-wavelength single-fiber technology and minimizes the possibility of reflections in the system. The units on both ends of a link are different. One module uses one wavelength to transmit and a second wavelength to receive, while the other module flips that relationship. For this reason, these units are used in pairs. A pair of a one-channel single fiber is used for media conversion between 10/100BASE-TX and 100BASE-FX. Two different transmitting wavelengths, one wavelength with bi-directional for both transmit and receive. DMC-920R: This media converter provides 1310 micron for TX, 1550 micron for RX. DMC-920T: This media converter provides 1550 micron for TX, 1310 micron for RX. Fiber cable support is 9/125um, 10/125um single-mode fiber, maximum 20 km cable distance.  

Ubiquiti USG-PRO-4 Enterprise Gateway Router, Product Highlights Dual-Core 1 GHz Processor 2 GB On-Board Flash Memory Rackmountable Design 1 x RJ-45 Serial Console Port 2 x Gigabit WAN Ports 2 x Gigabit LAN Ports 2 x SFP Fiber Port Ubiquiti Networks USG-PRO-4 Overview   With four Gigabit Ethernet ports and two SFP combination ports, the USG-PRO-4 Enterprise Gateway Router with 2 Combination SFP/RJ-45 Ports from Ubiquiti Networks is designed to be the backbone of a network. This gateway is designed to support multiple network switches which in turn can support a variety of networked devices such as access points, management stations, VoIP devices, and much more. The integrated SFP combination ports make it simple to connect fiber channel devices such as SAN servers and other local area networked devices. On the back of this rackmountable gateway you will find a single RJ-45 serial console port for command line interface management, two LAN ports, two WAN ports, and two SFP combination ports offering a diverse set of connection options.   Ubiquiti Networks USG-PRO-4 Specs Processor Dual-Core 1 GHz, MIPS64 with hardware acceleration for packet processing System Memory 2 GB DDR3 RAM On-Board Flash Storage 4 GB Max Power Consumption 40 W Power Method 110-240 VAC Power Supply Internal AC/DC power adapter 60 W (24 V, 2.5 A) Certifications CE, FCC, IC Rackmountable Yes ESD/EMP Protection Air: ± 24 kV Contact: ± 24 kV Temperature & Humidity Operating Temperature: 14 to 113°F / -10 to 45°C Operating Humidity: 10 to 90% non-condensing Buttons Reset LEDs System: Status Data Ports: Speed/Link/Activity Layer 3 Routing Forwarding Performance Packet Size: 64 Bytes; 1,000,000 pps Packet Size: 512 Bytes or larger; 1 Gbps per port line rate Networking Interface Console Port 1 x RJ-45 serial port Data Ports 2 x Gigabit Ethernet ports 2 x Gigabit Ethernet/SFP combination ports System Requirements • Linux, Mac OS X, or Microsoft Windows 7/8/10 • Java Runtime Environment 1.6 (or above) • Web Browser: Mozilla Firefox, Google Chrome, or Microsoft Internet Explorer 10 (or above) • UniFi Controller software v4.8 or higher Dimensions & Weight Dimensions 19.06 x 1.73 x 6.46" / 484 x 44 x 164 mm Weight 5.07 lb / 2.30 kg Packaging Info Package Weight 6.6 lb Box Dimensions (LxWxH) 23.2 x 8.6 x 3.8"

TP-LINK MC220L Gigabit Ethernet Media Converter Price in Pakistan MEDIA CONVERTER & MODULE Standards and Protocols IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x Basic Function Full Duplex Flow Control (IEEE 802.3x) Extends fiber distance up to 0.5km for multi-mode fiber or up to 10km with single-mode fiber Ports 1 x Gigabit SFP port 1 x 10/100/1000M RJ45 port (Auto MDI/MDIX) Wave Length Depends on the used SFP module Network Media 1000BASE-X Multi-mode/Single-mode SFP module Network Media 1000BASE-T UTP category 5, 5e, 6 cable (maxium 100m) EIA/TIA-568 100O STP (maximum 100m) LED Indicators PWR, Link/Act Dimensions (W*D*H) 3.7 x 2.9 x 1.1 in. (94 x 73 x 27 mm) Power Supply External Power Adapter (9VDC/ 0.6A) Max Power Consumption 1.7 W Safety & Emission FCC, CE, RoHS Package Contents • Media Converter MC220L • Power Adapter • Installation Guide Environment Operating Temperature: 0?~40? (32?~104?) Storage Temperature: -40?~70? (-40?~158?) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing

DESCRIPTION For Fast Response Please Contact Via Call Sms Whatsapp Only. TP-LINK 3OOMbps Wireless N ADSL2+ Modem Router TD-W896ON (PPPoE Cable Internet Setting Support. Ptcl Internet Support) Wireless N speed up to 3OOMbps makes it ideal for heavy bandwidth consuming or interruption sensitive applications like online gaming, Internet calls and even the HD video streaming. Ethernet WAN (EWAN) offers another broadband connectivity option for connecting to Cable, VDSL or Fiber modems. Guest Network Access provides secure Wi-Fi access for guests sharing your home or office network. 3OOMbps Wireless-Incredible Wireless Experience. With 3OOMbps 8O2.11n wireless and 4 Megabit LAN ports, the TD-W896ON is the ideal choice for bandwidth heavy users that rely on speedy, reliable connections for bandwidth intensive work or entertainment such as lag-free conference calls, HD video streaming or online gaming. Interchangeable LAN/WAN Port - Versatile Connectivity. The TD-W896ON supports ADSL or Ethernet WAN connections (EWAN) that allow users to have the flexibility of different Internet connections among ADSL, cable or fiber modem using its interchangeable LAN/WAN port. This unique feature makes it easier when users need to change to fiber or cable services when necessary. Orignal Pictures Attached. Courier Services Over All Pakistan.. Jamshed Town, Karachi, Sindh, Pakistan

Description: Details iShopping.pk brings you the best price for TP-Link Multi-mode MiniGBIC Module (TL-SM311LM) with 18 months official warranty express shipping all over Pakistan.   Specification: MEDIA CONVERTER & MODULE Standards and Protocols IEEE 802.3z, CSMA/CD, TCP/IP Wave Length 850nm Power Supply 3.3V Safety & Emission FCC, CE Cabel Multi-mode Fiber Fiber Type 50/125μm or 62.5/125μm Multi-mode Max. Cable Length 550m Data Rate 1.25Gbps Port Type LC/UPC Environment Operating Temperature: 0℃~70℃ (32℉~158℉) Storage Temperature: -40℃~80℃ (-40℉~176℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing   What This Product Does The TL-SM311 series Fiber Module Cards are introduced for extending transfer distance. Attached to our managed/smart switches, they can extend the distance to several kilometers even tens of kilometers which can basically satisfy the distance requirement of LAN. Users can choose whether and which items to use the fiber modules according to the demand in order to lower cost.

Description: Details iShopping.pk brings you the best price for TP-Link Single-mode MiniGBIC Module (TL-SM311LS) with 18 months official warranty express shipping all over Pakistan.   Specification: MEDIA CONVERTER & MODULE Standards and Protocols IEEE 802.3z, CSMA/CD, TCP/IP Wave Length 1310nm Power Supply 3.3V Safety & Emission FCC, CE Cabel Single-mode Fiber Fiber Type 9/125 μm Single-mode Max. Cable Length 10km Data Rate 1.25Gbps Port Type LC/UPC Environment Operating Temperature: 0℃~70℃ (32℉~158℉) Storage Temperature: -40℃~80℃ (-40℉~176℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing   What This Product Does The TL-SM311 series Fiber Module Cards are introduced for extending transfer distance. Attached to our managed/smart switches, they can extend the distance to several kilometers even tens of kilometers which can basically satisfy the distance requirement of LAN. Users can choose whether and which items to use the fiber modules according to the demand in order to lower cost.