Pl2303 usb rs232

This module can be used as a standard serial port with Laptops that don't have a standard serial port. This module creates a virtual COM port using USB on your computer which can support various standard Baud Rates (300 bps to 1 Mbps) for serial communication. This module includes the TX (transmit) and RX (receive) data signals.

Cable Length:80cm Color:As the picture show Size:6.7 x 3.5 x 1.5cm USB specification 2.0 compliant. Support Rs232 serial interface DB9. Support over1 Mbps data transfer rate. SupportWindows 98/2000/XP/8/10 and Mac OS9.0/OSX/Linux Support remote wake-up and power management. Suitable for PDA and Modem. Available for USB port. Low power consumption Product Weight:60g/pcs

You can easily connect your cellular phone / PDA / digital camera / modem / ISDN terminal adapter to your computer through an available USB 2.0 port. Setup is easy. Just plug your device in the adapter, connect it into your PC or Mac, and it’s ready to work. The cable adapter supports USB full speed communication and baud rates can be modified to desired setup. It supports automatic handshake mode, and is bus-powered.

You can easily connect your cellular phone / PDA / digital camera / modem / ISDN terminal adapter to your computer through an available USB 2.0 port. Setup is easy. Just plug your device in the adapter, connect it into your PC or Mac, and it’s ready to work. The cable adapter supports USB full speed communication and baud rates can be modified to desired setup. It supports automatic handshake mode, and is bus-powered.

DESCRIPTION Compatible with USB2.0 ADUM3160 isolation voltage: 2500V module: isolation voltage 1500V Using the environment: – 40 Celsius to 85 Celsius After a test support equipment: Full equipment: for USB flash drive, digital camera, card reader, mobile hard disk, U aegis, USB hub, AVRJTAG, AVRISP, AVRISPMKII, S – Lab, JET51, J – Link, FET430UIF, PICKIT2, XDS100, LPC cc-link, ICD2, USB serial port (FT232, CP2102, PL2303, CH341 chips). Low speed devices: Keyboard, mouse, USBASP, USB HID equipment, USB CDC equipment. The tested part does not support the USB wireless network card, see USB flash drive. Colour: Blue Material:ABS Size: 40 X 23.3mm Mention that you found this ad on DealMarkaz.pk when you call.

Description: Details iShopping.pk brings you the best price for VDO360 The Saber PTZ Camera with DVI-I/USB 3.0 with express shipping all over Pakistan.   The Saber PTZ Camera   from  VDO360  provides clear and crisp high-quality images even at a low lux of 0.01 lux. The camera has a sleek and intelligent design and the belt-drive technology with twin motors ensures smooth, quiet, and fast PTZ movement. The camera offers DVI-I (HDMI) & USB 3.0 simultaneous outputs with far end camera control. 2D and 3D noise reduction helps deliver high-quality video when adjusting to changing lighting conditions.   Features: • Sleek & intelligent design • Provides low-light viewing ability • High-quality image even at low lux of 0.01 lux • DVI-I (HDMI) & USB3.0 simultaneous output • Far end camera control via USB 3.0 UVC ability based on Codec FECC • Desktop app control software included to control the camera and video settings • VISCA control • RS232 control • Belt-drive technology with twin motors for smooth, quiet, and fast PTZ movement • Large FOV at 72.5° with no video distortion • 2D and 3D noise reduction offers the high-quality video when adjusting to different room conditions • Fully operational remote control with a power-off function, resetting the camera back to the start position • Reverse mountable, standard tripod screw on bottom of unit   Specifications: Video Format USB 3.0 and DVI: 1080p 59.94/50/29.97/25; 720p 59.94/50/29.97/25 DVI: 1080i 59.94/50 Video Output USB 3.0 & DVI-I Sensor 1/2.3" 4K UHD CMOS image sensor Lens f3.9 to 46.1 mm (12x zoom), E1.8 to 2.8 Angle of View 72.5° Head Rotation Angle Pan Rotation: ± 170° Tilt rotation: -30° -+90° Supports inverted installation Rotation Speed Pan Speed: 0.1° to 150°/sec; Tilt speed: 0.1° to 80°/sec Preset 10 via IR remote setting, (255 via RS232) Preset Accuracy: 0.2° White Balance Auto/Manual Exposure Auto/Manual (Iris, Shutter) Control Signal SB UVC FECC and 8-pin mini DIN--RS232--VISCA/PelcoD/Pelco-P protocol Power Voltage 12 VDC/2.0 A Power Port: HEC3800 Maximum Power Consumption 24 W Working Temperature 23 to 113°F (-5 to 45°C) Storage Temperature 68 to 140°F (20 to 60°C) Dimensions 8.6 x 7.5 x 6.7" (22 x 19 x 17 cm) Weight 3.3 lb (1.5 kg)

Description: Details iShopping.pk brings you the best price for InFocus USB 3.0 with PTZ Camera (INA-PTZ-3) with express shipping all over Pakistan.   PTZ Camera with HD Clarity, Connectivity and Control Add the InFocus RealCam pan/tilt/zoom (PTZ) professional-quality HD camera to any computer, including a Mondopad, to make your video meetings or events shine. The RealCam features a full HD wide-angle video camera with USB 3.0 and HDMI connectivity at low bandwidth.   Features: • True high definition 1080p resolution • Pan, tilt and zoom using the included remote control • Integrated 72.5-degree wide-angle lens • Connect to any computer via USB 3.0 or HDMI without a separate capture device • Stream video over your network via the RJ45/LAN port • Integrate with room control systems with RS232 and RS485 ports • Use seamlessly with any software running on any OS, including Skype for Business, Adobe Connect, GoToMeeting and more • Pan angle of -170 to +170 degrees • Tilt angle of -30 to +90 degrees • Power adapter required (not supplied) outside North America   Specifications: Technical Information HD Recording Yes Display & Graphics Image Sensor Type CMOS Color Supported Color Effective Camera Resolution 2.1 Megapixel Video Video Formats H.264 H.265 Motion JPEG Maximum Video Resolution 1920 x 1080 Lens Minimum Focal Length 3.50 mm Maximum Focal length 42.30 mm Optical Zoom 12x Network & Communication Connectivity Technology Cable Remote Management Yes Interfaces/Ports HDMI Yes Network (RJ-45) Yes                                                Physical Characteristics Form Factor Shelf Mount Wall Mount Weight (Approximate) 3 lb

Compatible Device: Supports console device such as Cisco, TP-Link,Ubiquiti, Linksys,Huawei, HP ProCurve,and more; Compatible System: Windows, Mac OS, Linux, No needed driver for Windows 10/8, Mac OS.

LIBRA L-7080i The LIBRA L-7080i is an omni-directional presentation area imager bar code scanner, it uses digital imaging technology to provide intuitive and blazing reading of 1D and 2D bar codes without sacrificing scanning quality or performance. The L-7080i reader provides great performance and reliability along with a rich feature set to provide excellent value in virtually any desktop presentation bar code scanning system. With the L-7080i, not only can identify product pricing barcode label, furthermore, it is able to scan virtually mobile bar code on various types of display to enhance service levels. When space is limited but high performance is required, its compact size and footprint make it the ideal solution for space-constrained environments. Its precise imaging scan volume is perfect for hands-free scanning in confined spaces and helps reduce accidental misreads of items, improving productivity and customer satisfaction. The L-7080i reader includes a powerful configuration tool which allows easy integration into existing or new host systems, allows management to manage maintenance. General Lightweight and ergonomic design Read the most common 1D, 2D, composite and stacked codes, reduce your investment cost. Boost customer services with good ability to scan virtually mobile bar code on various types of display. With the most compact footprint can fit in the most space constrained areas. IP42 sealing protection design withstands for use in tough environments. Wallmount hanging for easy installation. Scanner head can be forward and backward adjusted in a total 102° range to accommodate to your application need. EAS compatible Best cost-effective investment. Specifications Performance Light Source 625± 5nm Red LED Depth of Field Up to 300mm@20 mil/0.5mm, PCS90% Scan Pattern Field of View 40° horizontal, 25° vertical Scan Rate 120 scans per second in 1D mode , 60 images per second in 2D mode Resolution 1D 4mil/0.1mm, 2D 5mil/0.127mm Print contrast ratio 30% Indicator Beeper and LED (Stand by Blue, Good read Orange) Interface USB, RS232 Physical Color Available Black(Scanner and Base)or Beige(scanner)and Dark Gray(base) Dimensions (WxHxL) 94 x 161.51 x 97.71mm Weight 325g Electronic Input Voltage DC +5V @2A Power Consumption 1.35W Operating Current 270mA Standby current 250mA Environmental Ambient light Up to 100,000 Lux Operating temperature 0°C ~ 40°C (32°F ~ 104°F) Storage temperature -10°C ~ 60°C (14°F ~ 140°F) Sealing IP42 EAS EAS compatible (standard) Symbologies Automatically discriminates major standard 1D and 2D bar codes, include GS1 databar - Omnidirectional, Expanded and Limited codes

Features: Products come with self-intellectual property; Comfortable operation; Press key comes with up to 3 millions times pressing life; Adopts CCD technology and advance intelligent Image recognition system, can recognize all main 1D code of the market; Adopt advance 2.4HZ transfer profile; Adopts red light LED exposure support system, can recognize code promptly even under dark environment. Can fast recognize 1D barcode from screen of computers or mobile phones. Sepcifications: Light type: Red LED, wave length: 625mm Scanning type: 1D image recognition technique; Technique type: CCD image technique Scanning speed: 300 times/sec Recognize accuracy: =5mil Scanning angle: Rotation 360°,Gradien+/-55°,Deviation:+/-55° Symbol contrast: =30% reflection difference Visual angle: Horizontal:36°,Vertial:23° Decoding ability: Code128,EAN-13,EAN-8,Code39,UPC-A,UPC-E,Codabar,Interleaved 2 of 5,ISBN/ISSN, ode 93,UCC/EAN-128,GS1 Databar etc Interface: USB, RS232, PS2 etc Prompt mode: Buzzer, indicator light Scanning type: Manual Physical Parameter: Size: 160mm×70mm×90mm Weight: 271.3g Material : ABS+PC Cable: 1.8m Shock resistance: Pass 1.5M dropping test Environment parameter: Working temperature: -10℃-50℃ Storage temperature: -20℃-60℃ Humidity: Relative humidity 5%-95%(no condensation) Brightness: Max.4,500 Lux(CFL) Electronic parameters: Voltage: 5V Current: 270mA(working);94mA(stand by) EMC: FCC Class A, CISPR Class A Electrostatic protection: 15KV

Interface type: USB/RS232 Item No.: VS5905 One-dimensional Wired Scanner Resolution: 1500DPI Type: Handheld Scanner Scanning rate: up to 300 times/sec Dimensions: 150mm L * 70mm W * 95mm H Weight: 150g

Adopt advanced image technology, with fast scanning speed and wide scanning angel as omnidirectional laser scanner, and high performance on reading some broken or bad printing barcodes. Features: Support all general 1D barcodes including GSI Data Bar; Support mobile phone barcodes, reverse color barcode and DPM barcodes; Decoding speed reaches to 45 frames/sec; Stalinite scanning window; IP grade: IP54; Pass 1.5m free dropping test; Support interface of USB, PS/2, RS232; Support online update; Performance parameters Light source:White LED Buzzer:Seven tones or silent Lamp:White System interface:KBW, RS232,USB Physical parameters Volume(Lx W x H):Product size 78 mm x 75 mm x 141mm (3.2" x 3.3" x 5.9"), Weight:Product size180 g (12 oz) Electrical parameters Input voltage:5.5 VDC ± 0.25 V Work power:2.0 W (430 mA @ 5 V) Standby power:0.5 W (100 mA @ 5 V) Environmental parameter Operating temperature:0° C - 40° C Storage Temperature:-40°C -60°C Humidity:0% to 95% relative humidity (no condensation) Antiknock characteristic Withstand 1.5 meters high drop from concrete floor. Dust-proof Seal to prevent air dust particle erosion. Scanning parameters Scanning mode:Omni directional (640X480) Highest Reflectivity:Max 20% reflectivity can be read Scanning Angle:70°, 75°

New firmware device multi-communication mode: RS232/485, TCP/IP, and USB-host The firmware of X628-C has been upgraded to the New Firmware. It brings many new experiences, including the new stunning GUI, rock-solid stability, faster matching speed and better expandability. Users can easily manage data by networking X628-C via RS232/485, TCP/IP. Most importantly, all the functions can still operate in a networking state. X628-C is compatibility with various types of USB flash disks, ADMS and former SDK. It also supports data backup and retrieve to avoid the risk of accidental deletion. It promotes the fingerprint time & attendance management to the next level. You can get the best of benefits from the X628-C.

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 128V Audio DSP Mixer with express shipping all over Pakistan.   The CONVERGE Pro 2 128V Audio DSP Mixer from ClearOne is a complete conferencing solution with 12 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in VoIP interface for 2 lines. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection. The mixer comes with built-in VoIP for VoIP conferencing. The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.   Features: Architecture • 12 mic/line inputs with AEC •  Built-in VoIP for 2 lines •  Built-in USB for PC-based conferencing Scalable Connectivity •  Standalone and daisy-chained system •  Stack up units up to 96 mic/line inputs •  Expansion bus C-Link with 64 channels •  P-Link bus to connect 6 peripherals Configuration & Management •  CONSOLE software •  Auto-discovery of devices •  Matrix View for entire system •  FlowView for visualized audio signal paths •  System monitoring and troubleshooting Audio Signal Processing •  Acoustic Echo Cancellation processing •  Distributed Echo Cancellation on every mic input •  Noise cancellation with Adaptive-Ambience •  Acoustic Intelligence with faster convergence •  DARE feedback elimination •  Microphone gating Flexible Control Options •  Dialer app for Windows, Mac, iOS, and Android •  Tabletop controller with a touch panel •  Wall controller with buttons •  Web-based controller Supports 3rd-party control modules   Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) VoIP Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation Audio: 5 lines (2 default + 3 lines through license), each line supporting 1+5 calls Sample Rate: 24 kHz Sample Bit Depth: 24-bit Codec: G.711 uLaw, G.711 ALaw, G.722 Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: Proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 48T Audio DSP Mixer with express shipping all over Pakistan.     The CONVERGE Pro 2 48T Audio DSP Mixer from ClearOne is a complete conferencing solution with 4 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in Telco interface for teleconferencing. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection.   The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.     Features: Architecture • 4 mic/line inputs with AEC •  Built-in Telco with ClearEffect processing •  Built-in USB for PC-based conferencing Scalable Connectivity •  Standalone and daisy-chained system •  Stack up units up to 96 mic/line inputs •  Expansion bus C-Link with 64 channels •  P-Link bus to connect 6 peripherals Configuration & Management •  CONSOLE software •  Auto-discovery of devices •  Matrix View for entire system •  FlowView for visualized audio signal paths •  System monitoring and troubleshooting Audio Signal Processing •  Acoustic Echo Cancellation processing •  Distributed Echo Cancellation on every mic input •  Noise cancellation with Adaptive-Ambience •  Acoustic Intelligence with faster convergence •  DARE feedback elimination •  Microphone gating Flexible Control Options •  Dialer app for Windows, Mac, iOS, and Android •  Tabletop controller with a touch panel •  Wall controller with buttons •  Web-based controller •  Supports 3rd-party control modules     Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Amplifier Output Speaker Output Port: Dual binding posts Audio: 2 x Channel Output Power: Maximum 10 W, 8 Ohms load Frequency Response: 20 Hz to 22 kHz @ +10 dBu, +/- 0.5 dBu THD + N: 20 Hz to 22 kHz @ +10 dBu, 1 W, Dynamic Range: 20 Hz to 22 kHz @ 20 dB, >102dB, with 20 kHz digital low pass filter Crosstalk: Channel to Channel, stimulus at 20 dBu, 10 W output to receptor 8⿦ load, 20 Hz to 22 kHz, Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)