Phihong switching power supply
Top sales list phihong switching power supply
Pakistan
Powertron Plus offer the interchangeable AC-DC Switching Power Supply from 5W to 90W. And, the output range from 3V to 50VDC. Our products are approved UL60950-1, EN60950-1 safety and EMC standard. Our factory in Dong Guan is following IS9001 Certificated. If you have any needs, please contact with us!
See product
Pakistan (All cities)
The mini UPS uninterruptible power supply is an alternate energy storage power supply. Used safe and environmentally friendly lithium battery. Reliable and reliable PCB, trick flow Constant current / constant voltage lithium battery charging BMS, Created by high performance, high efficiency DC-DC, boost and switching circuits. This mini UPS features full overcharge, overdischarge, over current and short circuit protection.
Rs 5.000
See product
Pakistan (All cities)
Description: Details iShopping.pk brings you the best price for Vaddio RoboSHOT 12 QUSB System with express shipping all over Pakistan. Feautues: • Pan/Tilt/Zoom Camera with CCU • Exmor 1/2.8" Full HD CMOS Sensor • Built-In Web Server for Setup & Control • Power/Video/Control over Cat-5 • Quick-Connect USB Interface • Simultaneous HDMI & HD YPbPr Outputs • Streams MJPEG or H.264 over USB Specifications: Camera Image Sensor Exmor 1/2.8", 2.34 megapixel, full HD (1080p/60 native) high-speed, low-noise CMOS image sensor Lens 12X optical zoom Supported Resolutions HD Resolutions: (16:9 format) 1080p/60/59.94/50/30/25 1080i/60/59.94/50 720p/60/59.94/50/30/25 Miscellaneous Tri-Synchronous Motion: Concurrent PTZ motor movement and simultaneous PTZ arrival at a stored preset Range-Set: Optical zoom limits on tele end and wide end Advanced ISP: Vivid and accurate color with fast and sharp automatic focus and iris routines S/N Ratio >50 dB Minimum Illumination 1.0 lux (F1.8, 50IRE) Recommended illumination: >100 lux Minimum Distance 0.4" (10 mm), wide end; and 2.6 ft (800 mm), tele end Pan & Tilt Angles: Pan: ±160°, Tilt: +90°, -30° Speeds: Pan/Tilt:.35 to 120°/sec Sync System Internal Control Method Ethernet: Internal Web Pages and Telnet, IR Remote Commander and RS-232 for external controllers Dimensions 6.94 x 7.05 x 6.76" (17.6 x 17.9 x 17.2 cm) Weight 4.85 lb (2.2 kg) Quick-Connect USB Interface (QUSB) Video Output USB 2.0 (MJPEG): Resolution up to 720p/30 (USB 2.0 MJPEG) H.264 (IP) on Ethernet: Resolution up to 1080p/30 (H.264 over IP) Analog Component (YPbPr): Resolution up to 1080p/60 HDMI: Resolution up to 1080p/60 Connectors Power: 5.5 mm OD x 2.5 mm ID Coaxial Connector YPbPr: DE-15 (15-pin VGA) Female HDMI: HDMI Female RS-232 IN: RJ-45 Jack RS-232 OUT: RJ-45 Jack EZ-Power Video: RJ-45 Jack (Power and Differential HD Video) CAT-5 Cable Distance Two Cat-5e cables (EZ-Power video and RS-232); max distance up to 100' (30.48 m) Power Supply 24 VDC, 2.08 A switching power supply Dimensions 8.38 x 6.00 x 1.72" / 21.3 x 15.2 x 43.69 cm Weight 1.4 lb / 0.64 kg Vaddio's RoboSHOT 12 QUSB System is a professional quality PTZ camera with fine detail and quality color reproduction packaged with a Quick-Connect USB Control unit. It's suitable for small to medium-sized rooms, houses of worship, medium auditorium A/V systems, small to medium distance learning classrooms, live event theaters, and lecture theaters with lecture capture. The key features of the camera are Tri-Synchronous Motion; Range-Set for setting optical limits; and the combination of an advanced image sensor, lens, and ISP (image signal processor). Paired with the camera, the Quick-Connect USB control unit uses the Vaddio EZCamera Cat-5 Cable System to transport HSDS (differential video), power, and control to and from the camera over standard Cat-5 cabling up to 100' with virtually no loss in video quality or latency. The USB interface provides simultaneous HDMI and HD component output, or you can stream over the USB output using MJPEG or H.264. The interface supports universal USB drivers, so you can connect the device to your computer with confidence that it will work.
See product
Pakistan (All cities)
Description: Details iShopping.pk brings you the best price for Vaddio RoboSHOT 12 QMini System with express shipping all over Pakistan. Features: • Pan / Tilt / Zoom Camera with CCU • Exmor 1/2.8" Full HD CMOS Sensor • Built-In Web Server for Setup & Control • Power/Video/Control on 2 x Cat-5 • Quick-Connect USB Interface Up to 100' • 720p/30 over USB Vaddio's RoboSHOT 12 QMini System is a professional quality PTZ camera with fine detail and quality color reproduction packaged with a Quick-Connect USB Control unit. It's suitable for small to medium-sized rooms, houses of worship, medium auditorium A/V systems, small to medium distance learning classrooms, live event theaters, and lecture theaters with lecture capture. The key features of the camera are Tri-Synchronous Motion; Range-Set for setting optical limits; and the combination of an advanced image sensor, lens, and ISP (image signal processor). Paired with the camera is the Quick-Connect USB Mini control unit, which uses the Vaddio EZCamera Cat-5 Cable System to transport HSDS (differential video), power, and control to and from the camera over standard Cat-5 cabling up to 100' in length with virtually no latency or loss in video quality. The USB Mini provides 720p/30 video over USB using UVC (Universal Video Class) drivers, so you can connect the device to your computer with confidence that it will work. Specifications: Camera Image Sensor Exmor 1/2.8", 2.34 Megapixel, Full HD (1080p/60 native) High-speed, Low Noise CMOS Image Sensor Lens 12X Optical Zoom Supported Resolutions HD Resolutions: 1080p/60/59.94/50/30/25, 1080i/60/59.94/50, 720p/60/59.94/50/30/25; 16:9 format Miscellaneous Tri-Synchronous Motion: Concurrent PTZ motor movement and simultaneous PTZ arrival at a stored preset Range-Set: Optical zoom limits on tele end and wide end Advanced ISP: Vivid and accurate color with fast and sharp automatic focus and iris routines S/N Ratio > 50 dB Minimum Illumination 1.0 lux (F1.8, 50IRE) Recommended illumination: >100 lux Minimum Distance 0.4" (10 mm), wide end; and 2.6 ft (0.8 m), tele end Pan & Tilt Angles: Pan: ±160°, Tilt: +90°, -30° Speeds: Pan/Tilt:.35 to 120°/sec Sync System Internal Control Method Ethernet: Internal Web Pages and Telnet, IR Remote Commander and RS-232 for external controllers Dimensions 6.94 x 7.05 x 6.76" (17.6 x 17.9 x 17.2 cm) Weight 4.85 lb (2.2 kg) Quick-Connect USB Interface (QMini) Video Output USB 2.0 (MJPEG): Resolution up to 720p/30 Connectors Power: 5.5 mm OD x 2.5 mm ID Coaxial Connector, Positive Center RS-232: RJ-45 Jack EZ-Power Video: RJ-45 Jack (Power and Differential HD Video) USB Interface Connector: Type-B, USB 2.0 Compliant, Standard UVC (Universal Video Class) Drivers Network Interface Ethernet over USB 2.0 Streaming Protocols USB 2.0, MJPEG (UVC standard drivers) Supported Web Browsers Chrome (latest release - auto updating) Firefox (latest release - auto updating) Internet Explorer (IE 8 to 11) Safari (Rev 6 and 7) CAT-5 Cable Distance Two Cat-5e cables (EZ-Power Video and RS-232) Max Distance up to 100' (30.48m) Power Supply 24 VDC, 2.08 A Switching Power Supply Operating Temperature 32 to 104°F / 0 to 40°C Dimensions 3.60 x 4.48 x 1.25" / 9.14 x 11.4 x 3.18 cm Weight 1.1 lb / 0.5 kg Packaging Info Package Weight 11.4 lb Box Dimensions (LxWxH) 13.622 x 12.126 x 11.89"
See product
Pakistan (All cities)
Branded original DC 12V 3A Power Adapter, AC 100-240V to DC 12V Transformers, Switching Power Supply for LCD Monitor, All Wifi Router Wireless Router, CCTV Cameras 2.1mm X 5.5mm US Plug 12v 3Amp Power Adapter; Output Current: 3A
Rs 350
See product
Pakistan
Little giant care label printer Industrial printer for care label? You have anohter choice for care label printer, SBARCO T43R. SBARCO releases a model, T43R, for care label printer total solution. T43R is equipped exclusive cutter, label stacker and label roll holder which make the care label be printed and cut correctly without shifting and sticking problem during the printing process. The minimum cutting length is 10mm. 300 dpi printing resolution can print very fine characters, graphics and barcode. T43R overturns the concept of care label printer, a desktop printer can do the same work as industrial printer, even it is the most cost-effective. Total solution for care label printer 300 dpi printhead resolution for finest characters and graphics Exclusive label holder, stacker and cutter No shifting, no sticking in printing care label LCD monitor for selecting stored care label forms for standalone operation 10mm min. cutting length No sticking on 102mm. in printing and cutting width SD card and internal memory support hundreds forms The most cost-effective care label printer PRINT Resolution 300 dpi (12 dots/mm) Mode Thermal transfer Print speed 1 to 3 ips (25.4 to 76.2 mm) Max. print length 150” (3810 mm) Max. print width 4.1” (104 mm) Min. cutting length 0.39" (10mm) CPU 32 bit CPU MEMORY 8MB SDRAM 4MB Flash ROM SD slot for expansion, up to 32GB DISPLAY Backlight LCD display, 128 x 64 dots CONTROL PANEL 4 multiple functional LED light buttons, including error light SENSORS Reflective sensor Cover open sensor, ribbon sensor, label sensor COMMUNICATION Serial, USB master/slave, Ethernet (option) AUDIO Buzzer warning sound POWER External universal switching power supply BARCODE 1D Code39 stand or extended, Code39 with check digit, Code93, Code128 UCC, Code128 Auto A,B,C mode, EAN8, EAN8/13 2&5 digit add-on, EAN13, Interleaved 2 of 5, Interleaved 2 of 5 with check digit, Interleaved with human readable check digit, UCC/EAN 128, UPC-A, UPC-A 2&5 digit add-on, UPC-E, UPC-E 2&5 digit add-on, UPC Interleaved 2 of 5 2D PDF417, Maxicode, Data Matrix, QR code INTERNAL FONT 5 internal expandable bitmap fonts (alpha-numeric) 2 internal expandable bitmap fonts (numeric only) Downloadable soft font 4 directions: 0, 90, 180 and 270 degrees GRAPHICS PCX, Direct binary graphic CARE LABEL Type Care label Width 0.59”~4.33” (15 mm~110 mm) Thickness Max. 0.0059”(0.15 mm) Core diameter 3" (76.2mm) Max. roll diameter 10” (254 mm) RIBBON Type Outside coating resin ribbon Width 1”~4.3” (25.4 mm~110 mm) Max. length 110 M Max. OD 1.535” (39 mm) ID 0.5” (12.7 mm) ENVIRONMENT Operation 5°C ~45°C (40°F~104°F) Storage -20°C~50°C (-4°F~122°F) HUMIDITY Operation 10%~90% non-condensing Storage 5%~95% non-condensing DIMENSION Width 7.83” (200.00 mm) Length 10.36” (263.19 mm) Height 7.41” (188.29 mm) Weight 3.7 KG (with stacker) FACTORY DEFAULT 3" Cutter, stacker, label roll holder OPTION Ethernet printer server
Rs 125.000
See product
Pakistan (All cities)
Description: Details iShopping.pk brings you the best price for TP-Link 16-Port 10/100Mbps Rackmount Switch (TL-SF1016) with express shipping all over Pakistan. Features: • 16 10/100Mbps RJ45 ports • Innovative energy-efficient technology saves power up to 75% • Supports MAC address self-learning and auto MDI/MDIX • Standard 19-inch rack-mountable steel case • Supports IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode • Non-blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput • 3.2 Gbps Switching Capacity • Store and forward Switching scheme • Auto-MDI/MDIX eliminates the need for crossover cables • Supports MAC address auto-learning and auto-aging • Auto-negotiation ports provide smart integration between 10Mbps, 100Mbps hardware. • Plug and Play design simplifies installation • Fanless design to make sure it works quietly Specification: HARDWARE Standards and Protocols IEEE 802.3i, IEEE 802.3u, IEEE 802.3x Interface 16 10/100Mbps RJ45 Ports AUTO Negotiation/AUTO MDI/MDIX Network Media 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) 100BASE-TX: UTP category 5, 5e or above cable (maximum 100m) Fan Quantity Fanless Power Supply 100-240VAC, 50/60Hz Power Consumption Maximum: 2.23W (220V/50Hz) Dimensions (W x D x H) 17.3*7.1*1.7 in. (440*180*44 mm) PERFORMANCE Switching Capacity 3.2Gbps Packet Forwarding Rate 2.38Mpps MAC Address Table 8K Buffer Memory 2Mb Green Technology Innovative energy-efficient technology saves power up to 70% Transfer Method Store-and-Forward OTHERS Certification FCC, CE, RoHS System Requirements Microsoft® Windows® 8, 7,Vista™, XP or MAC® OS, NetWare®, UNIX® or Linux. Environment Operating Temperature: 0℃~40℃ (32℉~104℉); Storage Temperature: -40℃~70℃ (-40℉~158℉); Operating Humidity: 10%~90% non-condensing; Storage Humidity: 5%~90% non-condensing What This Product Does The 16-Port 10/100Mbps Rackmount Switch TL-SF1016 provides you with a high-performance, low-cost, easy-to-use, seamless and standard upgrade to improve old network to 100Mbps network. All 16 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play. Moreover, with the innovative energy-efficient technology, the TL-SF1016 can save up to 75%* of the power consumption and 80% of the packaging material can be recycled, making it an eco-friendly solution for your business network. TP-LINK Green Technology This new generation The 16-Port 10/100Mbps Switch TL-SF1016 features the latest innovative energy-efficient technologies that can greatly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status and cable length to limit the carbon footprint of your network. It also complies with the EU'S RoHS, prohibiting the use of certain hazardous materials. Besides, 80% of the packaging material can be recycled. High Performance The rack-mount size steel case design, combined with a safety-certified internal power supply, make the switch the most robust product, which is very cost-effective for a less than 16-user environment. Featuring non-blocking switching architecture, TL-SF1016 forwards and filters packets at full wire-speed for maximum throughput. And IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode alleviate the traffic congestion and make TL-SF1016 work reliably. Easy to Use The auto features of this fast ethernet switch make installation plug and play and hassle-free. No configuring is required. Auto MDI/MDIX eliminates the need for crossover cables. Auto-negotiation on each port senses the link speed of a network device (10, 100 Mbps) and intelligently adjusts for compatibility and optimal performance.
See product
Pakistan (All cities)
Description: Details iShopping.pk brings you the best price for TP-Link 24-Port 10/100Mbps Rackmount Switch (TL-SF1024) with express shipping all over Pakistan. Features: • 24 10/100Mbps RJ45 ports • Innovative energy-efficient technology saves power up to 75% • Supports MAC address self-learning and auto MDI/MDIX • Standard 19-inch rack-mountable steel case • Supports IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode • Non-blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput • 4.8 Gbps Switching Capacity • Store and forward Switching scheme • Auto-MDI/MDIX eliminates the need for crossover cables • Supports MAC address auto-learning and auto-aging • Auto-negotiation ports provide smart integration between 10Mbps, 100Mbps hardware. • Plug and Play design simplifies installation • Fanless design to make sure it works quietly Specification: HARDWARE Standards and Protocols IEEE 802.3i, IEEE 802.3u, IEEE 802.3x Interface 24 10/100Mbps RJ45 Ports (Auto Negotiation/Auto MDI/MDIX) Network Media 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) 100BASE-TX: UTP category 5, 5e or above cable (maximum 100m) Fan Quantity Fanless Power Supply 100-240VAC, 50/60Hz Power Consumption Maximum: 3.53W (220V/50Hz) Dimensions (W x D x H) 17.3*7.1*1.7 in. (440*180*44 mm) PERFORMANCE Switching Capacity 4.8Gbps Packet Forwarding Rate 3.57Mpps MAC Address Table 8K Buffer Memory 2Mb Green Technology Innovative energy-efficient technology saves power up to 75% Transfer Method Store-and-Forward OTHERS Certification FCC, CE, RoHS System Requirements Microsoft® Windows® 8, 7,Vista™, XP or MAC® OS, NetWare®, UNIX® or Linux. Environment Operating Temperature: 0℃~40℃ (32℉~104℉); Storage Temperature: -40℃~70℃ (-40℉~158℉); Operating Humidity: 10%~90% non-condensing; Storage Humidity: 5%~90% non-condensing What This Product Does The 24-Port 10/100Mbps Rackmount Switch TL-SF1024 provides you with a high-performance, low-cost, easy-to-use, seamless and standard upgrade to improve old network to 100Mbps network. All 24 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play. Moreover, with the innovative energy-efficient technology, the TL-SF1024 can save up to 75%* of the power consumption and 80% of the packaging material can be recycled, making it an eco-friendly solution for your business network. TP-LINK Green Technology This new generation The 24-Port 10/100Mbps Switch TL-SF1024D features the latest innovative energy-efficient technologies that can greatly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status and cable length to limit the carbon footprint of your network. It also complies with the EU'S RoHS, prohibiting the use of certain hazardous materials. Besides, 80% of the packaging material can be recycled. High Performance The rack-mount size steel case design, combined with a safety-certified internal power supply, make the switch the most robust product, which is very cost-effective for a less than 16-user environment. Featuring non-blocking switching architecture, TL-SF1024 forwards and filters packets at full wire-speed for maximum throughput. And IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode alleviate the traffic congestion and make TL-SF1024 work reliably. Easy to Use The auto features of this fast ethernet switch make installation plug and play and hassle-free. No configuring is required. Auto MDI/MDIX eliminates the need for crossover cables. Auto-negotiation on each port senses the link speed of a network device (10, 100 Mbps) and intelligently adjusts for compatibility and optimal performance.
See product
Pakistan (All cities)
Description: Details iShopping.pk brings you the best price for TP-Link 16-Port 10/100Mbps Desktop/Rackmount Switch (TL-SF1016DS) with 18 months official waranty and express shipping all over Pakistan. Features: • 16 10/100M RJ45 ports. • Innovative energy-efficient technology saves power up to 75% • Supports MAC address self-learning and auto MDI/MDIX. • Standard 13-inch steel case. • Supports IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode • Non-blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput • 3.2 Gbps Switching Capacity • Store and forward Switching scheme • Auto-MDI/MDIX eliminates the need for crossover cables • Supports MAC address auto-learning and auto-aging • Auto-negotiation ports provide smart integration between 10Mbps, 100Mbps hardware. • Plug and Play design simplifies installation • Fanless design to make sure it works quietly Specification: HARDWARE Standards and Protocols IEEE 802.3i, IEEE 802.3u, IEEE 802.3x Interface 16 10/100Mbps RJ45 Ports (Auto Negotiation/Auto MDI/MDIX) Network Media 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) 100BASE-TX: UTP category 5, 5e or above cable (maximum 100m) Fan Quantity Fanless Power Supply 100-240VAC, 50/60Hz Power Consumption Maximum: 2.23W (220V/50Hz) Dimensions (W x D x H) 11.6×7.1×1.7 in. (294×180×44 mm) PERFORMANCE Switching Capacity 3.2Gbps Packet Forwarding Rate 2.38Mpps MAC Address Table 8K Buffer Memory 2Mb Green Technology Innovative energy-efficient technology saves power up to 75% Transfer Method Store-and-Forward OTHERS Certification FCC, CE, RoHS System Requirements Microsoft® Windows® 8, 7,Vista™, XP or MAC® OS, NetWare®, UNIX® or Linux. Environment Operating Temperature: 0℃~40℃ (32℉~104℉); Storage Temperature: -40℃~70℃ (-40℉~158℉); Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing What This Product Does The 16-Port 10/100Mbps Desktop/Rackmount Switch TL-SF1016DS provides you with a high-performance, low-cost, easy-to-use, seamless and standard upgrade to improve old network to 100Mbps network. All 16 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play. Moreover, with the innovative energy-efficient technology, the TL-SF1016DS can save up to 75%* of the power consumption and 80% of the packaging material can be recycled, making it an eco-friendly solution for your business network TP-LINK Green Technology This new generation The 16-Port 10/100Mbps Desktop/Rackmount Switch TL-SF1016DS features the latest innovative energy-efficient technologies that can greatly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status and cable length to limit the carbon footprint of your network. It also complies with the EU'S RoHS, prohibiting the use of certain hazardous materials. Besides, 80% of the packaging material can be recycled. High Performance The rack-mount size steel case design, combined with a safety-certified internal power supply, make the switch the most robust product, which is very cost-effective for a less than 16-user environment. Featuring non-blocking switching architecture, TL-SF1016DS forwards and filters packets at full wire-speed for maximum throughput. And IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode alleviate the traffic congestion and make TL-SF1016DS work reliably. Easy to Use The auto features of this fast ethernet switch make installation plug and play and hassle-free. No configuring is required. Auto MDI/MDIX eliminates the need for crossover cables. Auto-negotiation on each port senses the link speed of a network device (10, 100Mbps) and intelligently adjusts for compatibility and optimal performance.
See product
Pakistan (All cities)
Description: Details iShopping.pk brings you the best price for TP-Link 24-Port 10/100Mbps Desktop/Rackmount Switch (TL-SF1024D) with 18 months official warranty and express shipping all over Pakistan. Features: • 24 10/100M RJ45 ports. • Supports MAC address self-learning and auto MDI/MDIX. • Standard 13-inch steel case. • Supports IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode • Non-blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput • 4.8 Gbps Switching Capacity • Store and forward Switching scheme • Auto-MDI/MDIX eliminates the need for crossover cables • Supports MAC address auto-learning and auto-aging • Auto-negotiation ports provide smart integration between 10Mbps, 100Mbps hardware. • Plug and Play design simplifies installation • Fanless design to make sure it works quietly Specification: HARDWARE Standards and Protocols IEEE 802.3i, IEEE 802.3u, IEEE 802.3x Interface 24 10/100Mbps RJ45 Ports (Auto Negotiation/Auto MDI/MDIX) Network Media 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) 100BASE-TX: UTP category 5, 5e or above cable (maximum 100m) Fan Quantity Fanless Power Supply 100-240VAC, 50/60Hz Dimensions (W X D X H) 11.6*7.1*1.7 in. (294*180*44 mm) Power Consumption Maximum: 3.53W (220V/50Hz) PERFORMANCE Switching Capacity 4.8Gbps Packet Forwarding Rate 3.57Mpps MAC Address Table 8K Buffer Memory 2Mb Green Technology Innovative energy-efficient technology saves power up to 75% Transfer Method Store-and-Forward OTHERS Certification FCC, CE, RoHS System Requirements Microsoft® Windows® 8, 7,Vista™, XP or MAC® OS, NetWare®, UNIX® or Linux. Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing What This Product Does The 24-Port 10/100Mbps Switch TL-SF1024D provides you with a high-performance, low-cost, easy-to-use, seamless and standard upgrade to improve old network to 100Mbps network. All 24 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play. Moreover, with the innovative energy-efficient technology, the TL-SF1024D can save up to 75%* of the power consumption and 80% of the packaging material can be recycled, making it an eco-friendly solution for your business network. TP-LINK Green Technology This new generation The 24-Port 10/100Mbps Switch TL-SF1024D features the latest innovative energy-efficient technologies that can greatly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status and cable length to limit the carbon footprint of your network. It also complies with the EU'S RoHS, prohibiting the use of certain hazardous materials. Besides, 80% of the packaging material can be recycled. High Performance The rack-mount size steel case design, combined with a safety-certified internal power supply, make the switch the most robust product, which is very cost-effective for a less than 16-user environment. Featuring non-blocking switching architecture, TL-SF1024D forwards and filters packets at full wire-speed for maximum throughput. And IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode alleviate the traffic congestion and make TL-SF1024D work reliably. Easy to Use The auto features of this fast ethernet switch make installation plug and play and hassle-free. No configuring is required. Auto MDI/MDIX eliminates the need for crossover cables. Auto-negotiation on each port senses the link speed of a network device (10, 100 Mbps) and intelligently adjusts for compatibility and optimal performance.
See product
Pakistan (All cities)
Description: Details iShopping.pk brings you the best price for TP-Link 16-Port Gigabit Desktop/Rackmount Switch (TL-SG1016D) with express shipping all over Pakistan. Features: • 16 10/100/1000Mbps ports • Supports MAC address self-learning, Auto MDI/MDIX and Auto negotiation • Plug & play design • Innovative energy-efficient technology saves power consumption • Supports IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode • Non-blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput • 32Gbps Switching Capacity • 10KB Jumbo frame improves performance of large data transfers • Auto-MDI/MDIX eliminates the need for crossover cables • Supports MAC address auto-learning and auto-aging • Store and forward Switching scheme • Auto-negotiation ports provide smart integration between 10Mbps, 100Mbps and 1000Mbps hardware. • Plug and Play design simplifies installation Specifications: HARDWARE Standards and Protocols IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x Interface 16 10/100/1000Mbps RJ45 Ports (Auto Negotiation/Auto MDI/MDIX) Network Media 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) 100BASE-TX/1000BASE-T: UTP category 5, 5e or above cable (maximum 100m) Fan Quantity Fanless Power Supply 100-240VAC, 50/60Hz Power Consumption Maximum: 13.3W (220V/50Hz) Dimensions (W x D x H) 11.6*7.1*1.7 in. (294*180*44 mm) PERFORMANCE Switching Capacity 32Gbps Packet Forwarding Rate 23.8Mpps MAC Address Table 8K Jumbo Frame 10KB Green Technology Innovative energy-efficient technology saves power up to 15% Transfer Method Store-and-Forward OTHERS Certification FCC, CE, RoHs System Requirements Microsoft® Windows® XP, Vista™, Windows 7 or Windows 8, MAC® OS, NetWare®, UNIX® or Linux. Environment Operating Temperature: 0℃~40℃ (32℉~104℉); Storage Temperature: -40℃~70℃ (-40℉~158℉); Operating Humidity: 10%~90% non-condensing; Storage Humidity: 5%~90% non-condensing You now have the choice to go green when upgrading to a gigabit network! This new generation TL-SG1016D 16-Port Gigabit Switch features the latest innovative energy-efficient technologies that can greatly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status and cable length to limit the carbon footprint of your network. Power down Idle Ports When a computer or network equipment is off, the corresponding port of a traditional switch will continue to consume considerable amounts of power. The TL-SG1016D can automatically detect the link status of each port and reduce the power consumption of ports that are idle. Power Budget According to Cable Length Ideally, shorter cables would use less power because of less power degradation over their length; this is not the case with most devices as they will use the same amount of power across the cable regardless of whether it is 10 or 50 meters (32.8 or 164.0 feet)in length. The TL-SG1016D analyzes the length of the Ethernet cable connected and adjusts the power usage accordingly, rather than keeping the power consumption in a conventional solution. The auto features of this gigabit switch make installation plug and play and hassle-free. No configuring is required. Auto MDI/MDIX eliminates the need for crossover cables. Auto-negotiation on each port senses the link speed of a network device (10, 100, or 1000 Mbps) and intelligently adjusts for compatibility and optimal performance. The TL-SG1016D 16-Port Gigabit switch provides an easy way to make the transition to Gigabit Ethernet. All 16 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play. Moreover, with the innovative energy-efficient technology, the TL-SG1016D can save up to 40%* of the power consumption, making it an eco-friendly solution for your business network. Featured with 16 10/100/1000Mbps ports, TL-SG1016D greatly expands your network capacity, enabling instant large files transferring. So,power users in the home, office, workgroup, or creative production environment can now move large, bandwidth-intensive files faster. Transfer graphics, CGI, CAD, or multimedia files across the network instantly.
See product
Pakistan (All cities)
D-Link 5‑Port Desktop Gigabit Poe+ Switch 5x Gigabit Ethernet ports (4x PoE+ ports) PoE+, 60W power budget 10 Gbps switching fabric capacity Plug & Play simplicity for easy installation 2-Year D-Link Warranty 5x Gigabit Ethernet ports (4x PoE+ ports) PoE+, 60W power budget 10 Gbps switching fabric capacity Plug & Play simplicity for easy installation 2-Year D-Link Warranty Fast. Compact. Convenient. The D‑Link DGS‑1005P 5‑Port Desktop Gigabit PoE+ Switch enables you to connect Power over Ethernet (PoE) devices such as wireless access points (APs), network video cameras and IP phones to the network. Built with home and small business users in mind, the DGS‑1005P is compact and operates silently, making it ideal for most rooms and offices. Gigabit Performance. The DGS-1005P features plug-and-play installation and requires no configuration. Automatic MDI/MDI-X support on all ports removes the need for crossover cables when connecting to another switch, and auto-negotiation on each port intelligently adjusts the port speed for compatibility with the connected device. With wire-speed filtering and store-and-forward switching, the DGS-1005P maximises network performance while minimising the transmission of bad network packets. Power Over Ethernet+ The DGS-1005P features four Gigabit Ethernet ports that support the IEEE 802.3af and IEEE 802.3at PoE, supplying up to 30 W on each PoE port and providing a total power budget of 60 W. You can connect compatible devices to the DGS-1005P without using an additional power supply. This allows you to save on cabling and power supplies and to install devices on locations without immediate access to power outlets. Green Technolog The DGS-1005P features green technology such as IEEE 802.3az Energy-Efficient Ethernet (EEE), link status detection, and cable length detection. EEE adjusts the power consumption of the switch based on network utilisation, reducing energy use during periods of inactivity. Link status detection powers down unused ports, saving power when connected devices are shut down or disconnected. Cable length detection adjusts the power output of the port based on the cable length, reducing the power requirements of the switch. Compact and Silent The compact design of the DGS-1005P allows placement in most locations, including those where space is at a premium. The desktop form factor provides everything you need to set up a new network or expand an existing network, while the fanless design ensures silent operation even in noise-sensitive areas such as workstations and meeting rooms. Specs: Type Unmanaged Number of ports 5 ports Layer Layer 2 Main type of ports 1000BASE-T Gigabit Ethernet Switching capacity 10 Gbps PoE options 802.3af 802.3at Number of PoE ports 4 PoE power budget See datasheet Fanless 802.3az Energy-Efficient Ethernet support Form Factor Desktop Housing Metal Jumbo frame yes Cable diagnostics yes MAC address 2K
Rs 7.199
See product
Lahore (Punjab)
Description The Cisco Catalyst 3560 v2 Series is the next-generation energy-efficient Layer 3 fast Ethernet switches. This series of switches supports Cisco EnergyWise technology, which enables companies to measure and manage power consumption of network infrastructure and network-attached devices, thereby reducing their energy costs and their carbon footprint. The Cisco Catalyst 3560 v2 Series consumes less power than its predecessors and is the ideal access layer switch for enterprise, retail, and branch-office environments, as it maximizes productivity and investment protection by enabling a unified network for data, voice, and video. Product Features Redundant power system The Cisco Catalyst 3560 v2 Series access switches support the generation of Cisco RPS 2300, which increases availability in a converged data, voice, and video network by providing transparent power backup to two of six attached Cisco Catalyst 3560 v2 Series switches at the same time. The Cisco Catalyst 3560 v2 Series switches are capable of reverting back to their internal power supply without any service interruption. Ease of use and deployment The Cisco Catalyst 3560 v2 series offers several ease of use features, which enable fast and easy configuration of advanced Cisco Catalyst capabilities. Enhanced security With the wide range of security features, such as ACLs, authentication, port-level security, and identity based network services (IBNS) with 802.1x and extensions, that the Cisco Catalyst 3560 v2 Series offers, businesses can protect important information, keep unauthorized people off the network, guard privacy, and maintain uninterrupted operation. switch. Product Details Device Type Switch - 24 ports - L3 - Managed Enclosure Type Rack-mountable 1U Interfaces Fast Ethernet Ports 24 x 10/100 + 2 x SFP Performance Switching capacity: 32 Gbps Capacity Switched virtual interfaces (SVIs): up to 1000 Virtual interfaces (VLANs): 1000 MAC Address Table Size 12K entries Jumbo Frame Support 9016 Routing Protocol RIP-1, RIP-2, HSRP, static IP routing Remote Management Protocol SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s Power AC 120/230 V (50/60 Hz) Dimensions (WxDxH) 44.3 cm x 29.5 cm x 4.4 cm Weight 3.7 kg Manufacturer Warranty Limited lifetime warranty Show Detailed Specification Show Detailed Specification General Device Type Switch - 24 ports - L3 - Managed Enclosure Type Rack-mountable - 1U Subtype Fast Ethernet Ports 24 x 10/100 + 2 x SFP Performance Switching capacity: 32 Gbps Capacity Switched virtual interfaces (SVIs): up to 1000 Virtual interfaces (VLANs): 1000 MAC Address Table Size 12K entries Jumbo Frame Support 9016 Routing Protocol RIP-1, RIP-2, HSRP, static IP routing Remote Management Protocol SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH Encryption Algorithm SSL Authentication Method Kerberos, RADIUS, TACACS+, Secure Shell v.2 (SSH2) Features Layer 3 switching, Layer 2 switching, auto-sensing per device, DHCP support, auto-negotiation, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, traffic shaping, MAC address filtering, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, Dynamic ARP Inspection (DAI), Time Domain Reflectometry (TDR), Per-VLAN Spanning Tree Plus (PVST+) Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s Flash Memory 32 MB Flash Status Indicators Link activity, port duplex mode, bandwidth utilization %, power, link OK, system Expansion / Connectivity Interfaces 24 x 100Base-TX - RJ-45 1 x console - RJ-45 - management 2 x Ethernet 1000 - SFP (mini-GBIC) Power Contact: SA Computer SHOP# 61,62,73,74,77 1ST FLOOR MAKKAH CENTER HALL ROAD LAHORE Cell:03454113314 Ptcl# 04237353809 (Note) Don't send me sms never reply Just call only interested Person. We Have Delivery facility In Lahore Region........... Remember Us In Ur Pray....
See product
Pakistan (All cities)
Description: Details iShopping.pk brings you the best price for TP-Link 48-Port 10/100Mbps Rackmount Switch (TL-SF1048) with express shipping all over Pakistan. Features: • 48 10/100Mbps RJ45 ports • Supports MAC address self-learning and auto MDI/MDIX • Standard 19-inch rack-mountable steel case • Innovative energy-efficient technology saves power up to 50% • 100% Data filtering rate eliminates all error packets • Supports IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode • Non-blocking switching architecture forwards and filters packets at full wire-speed for maximum throughput • 9.6Gbps Switching Capacity • Auto-MDI/MDIX eliminates the need for crossover cables • Supports MAC address auto-learning and auto-aging • Support the port N-Way Auto-Negotiation, Store and Forward • Compact size design for desktops, Rackmountable • Plug and Play design simplifies installation Specification: HARDWARE Standards and Protocols IEEE 802.3i, IEEE 802.3u, IEEE 802.3x Interface 48 10/100Mbps RJ45 Ports (Auto Negotiation/Auto MDI/MDIX) Network Media 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) 100BASE-TX: UTP category 5, 5e or above cable (maximum 100m) Fan Quantity Fanless Power Supply 100-240VAC, 50/60Hz Power Consumption Maximum: 9.9W (220V/50Hz) Dimensions (W x D x H) 17.3*7.1*1.7 in. (440*180*44 mm) PERFORMANCE Switching Capacity 9.6Gbps Packet Forwarding Rate 7.14Mpps MAC Address Table 8K Green Technology Innovative energy-efficient technology saves power up to 50% Transfer Method Store-and-Forward OTHERS Certification FCC, CE, RoHS System Requirements Microsoft® Windows® XP, Vista™, Windows 7 or Windows 8, MAC® OS, NetWare®, UNIX® or Linux. Environment Operating Temperature: 0℃~40℃ (32℉~104℉); Storage Temperature: -40℃~70℃ (-40℉~158℉); Operating Humidity: 10%~90% non-condensing; Storage Humidity: 5%~90% non-condensing What This Product Does The TL-SF1048 10/100Mbps Switch is designed to meet the needs of the most demanding workgroup and departmental connectivity requirements. All 48 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play. Moreover, with the innovative energy-eff cient technology, TL-SF1048 can save up to 50%* of the power consumption and 80% of the packaging material can be recycled, making it an eco-friendly solution for your business network. TP-LINK Green Technology This new generation TL-SF1048 10/100Mbps Switch features the latest innovative energy-effcient technologies that can greatly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status and cable length to limit the carbon footprint of your network. It also complies with the EU’S RoHS, prohibiting the use of certain hazardous materials. Besides, 80% of the packaging material can be recycled. High Performance Featuring non-blocking switching architecture,TL-SF1048 forwards and filters packets at full wire-speed for maximum throughput. And IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode alleviate the traffic congestion and make TL-SF1048 work reliably. Easy to Use The auto features of this Fast Ethernet switch make installation plug and play and hassle-free. No configuring is required. Auto MDI/MDIX eliminates the need for crossover cables. Auto-negotiation on each port senses the link speed of a network device (10, 100Mbps) and intelligently adjusts for compatibility and optimal performance.
See product
Pakistan (All cities)
Description: Details iShopping.pk brings you the best price for TP-Link 48-Port Gigabit Rackmount Switch (TL-SG1048) with express shipping all over Pakistan. Features: • 48 10/100/1000Mbps RJ45 ports • Innovative energy-efficient technology saves power up to 18% • Supports MAC address self-learning and auto MDI/MDIX • Standard 19-inch rack-mountable steel case • 100% Data filtering rate eliminates all error packets • Supports IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode • Non-blocking switching architecture forwards and filters packets at full wire-speed for maximum throughput • 96Gbps Switching Capacity • Auto MDI/MDIX eliminates the need for crossover cables • Supports MAC address auto-learning and auto-aging • Support the port N-Way Auto-Negotiation, Store and Forward. • Compact size design for desktops, Rackmountable • Plug and Play design simplifies installation Specification: HARDWARE Standards and Protocols IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x Interface 48 10/100/1000Mbps RJ45 Ports (Auto Negotiation/Auto MDI/MDIX) Network Media 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) 100BASE-TX/1000BASE-T: UTP category 5, 5e or above cable (maximum 100m) Fan Quantity 2 Power Supply 100-240VAC, 50/60Hz Power Consumption Maximum: 29.8W (220V/50Hz) Dimensions (W x D x H) 17.32*8.7*1.73 in.(440*220*44 mm) PERFORMANCE Switching Capacity 96Gbps Packet Forwarding Rate 71.4Mpps MAC Address Table 8K Buffer Memory 16Mb Jumbo Frame 10KB Transfer Method Store-and-Forward OTHERS Certification FCC, CE, RoHS System Requirements Microsoft® Windows® 8, 7,Vista™, XP or MAC® OS, NetWare®, UNIX® or Linux. Environment Operating Temperature: 0℃~40℃ (32℉~104℉); Storage Temperature: -40℃~70℃ (-40℉~158℉); Operating Humidity: 10%~90% non-condensing; Storage Humidity: 5%~90% non-condensing What This Product Does The 48-Port Gigabit Switch TL-SG1048 is designed to meet the needs of the most demanding workgroup and departmental connectivity requirements. A reliable, easy-to-use switch without the complexity of management, the TL-SG1048 provides 48 10/100/1000Mbps ports. The TL-SG1048 combines ease of use with unsurpassed performance resulting in an exceptional value for any cost-conscious network administrator who wants the best possible solution at the best possible price. TP-LINK Green Technology This new generation The 48-Port Gigabit Rackmount Switch TL-SG1048 features the latest innovative energy-efficient technologies that can greatly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status to limit the carbon footprint of your network. It also complies with the EU'S RoHS, prohibiting the use of certain hazardous materials. Besides, 80% of the packaging material can be recycled. Ease of Use The auto features of this gigabit switch make installation plug and play and hassle-free. No configuring is required. Auto MDI/MDI-X crossover on all ports eliminate the need for crossover cables or uplink ports. Auto-negotiation on each port senses the link speed of a network device (either 10, 100, or 1000 Mbps) and intelligently adjusts for compatibility and optimal performance. Compact size shell make it ideal for desktops with limited space while it is also Rackmountable, convenient and safe. Dynamic LED lights provide real-time work status display and basic fault diagnosis. High Performance The TL-SG1048 features non-blocking wire-speed architecture with a 96Gbps switching capacity for maximum data throughput. An 8K MAC address table provides scalability for even the largest networks. It also supports 802.3x Flow Control for full-duplex mode, and back pressure flow control for half-duplex mode alleviates traffic congestion and ensures reliable data transmission.
See product
-
Next →