Peripheral devices

Two in-line arranged thermal transfer print units for simultaneous two-color printing in one label. With ribbon saver at one print unit. The XC series meets the conditions for the classification and labeling inventory according to GHS. For large label rolls up to 300 mm diameter The two print units including ribbon holder, operation panel and electronics are adopted from the proven A+ series Cutter Used to cut paper labels, self-adhesive labels, cardboard, textile or synthetic materials as well as heat shrink tubes. Perforation cutter For XC4 printers only. Enables the perforation of the material for later manual separation. Stacker with cutter For XC4 printers only. Printed materials are cut and stacked. The print job is stopped as soon as the maximum stack height is reached. Even stiff or curved materials may be processed. We recommend to have your material tested at our facilities. Functions 1. Wide graphic display White backlight for optimum readability. 2. Ribbon holder Simple, centered insertion of the ribbon with three-part tightening axles. 3. Simple adjustment The print head is pressed down by toggles. One is mounted to the left label margin, the other is pushed to the right label margin. 4. Peripheral connection All add-on modules are easy to connect. All peripheral devices are plugged in the printer using two pins and are fixed in place with a screw. 5. Solid metal housing Die-cast aluminum. All components are mounted on it. 6. Roll holder For labels up to a diameter of 300 mm. Swing lever and integrated brake make sure that the labels are unwound with constant tension. 7. Ribbon saver for printhead 1 The ribbon saver is used for labels to be partially printed. The print head is lifted within the unprinted area and the ribbon stopped during label feeding. 8. Fanfold guide Fanfolded labels are positioned behind the print unit. Guide and additional brake ensure a reliable feeding to the print unit.

DESCRIPTION Ugreen 4-Ports USB 3.0 Switch Box About this item: - USB 3.0 Switch Selector: UGREEN USB 3.0 switch allows up to 2 users to share 4 USB 3.0 peripheral devices. - Increased Work Efficiency: The keyboard mouse switch supports ultra-fast USB 3.0 data transfer rates of up to 5Gb/s (10 times faster than USB 2.0) to work flawlessly with high-bandwidth USB 3.0 devices. - Multiple Device Sharing: The USB switcher allows you to share multiple devices such as printers, scanners, mouse, keyboard, card reader, and other USB devices between 2 computers. - One-Botton Switch: Button and LED design, you can easily switch between systems via push buttons with LED indicating the active computer within one second. - More Stable Connection: USB 3.0 switch with a separate micro USB female port for option power, which optimizes its compatibility with more devices such as HDD, Digital Video Cameras, SSD, etc. Important Note: Please use Standard 5V Adapter(Not Included, sold separately) for powering. Any charger with higher voltage output is Not allowed and may affect the product performance UG115/DEJJ/AE Mention that you found this ad on DealMarkaz.pk when you call.

MX331-T Stunning ARGB Mid-Tower MX331-T has three built in ARGB strips at the front panel, which showcases spectacular lighting effects. With a crystal clear tempered glass left panel, you are freely to create a clear view of your computer’s internal components. It’s also equipped with adjustable fan speed controller and 4 USB ports to bring you efficient and convenient experiences. Three Stylish ARGB Strips MX331-T’s three ARGB lighting strips bring you a stylish design. The acrylic front panel also enhances the fluid lighting effects, which helps you to present a stunning build!   Extraordinary Transparent View A beautiful tempered glass window acts as a portal into your PC’s interior. Ideal for those who want to set up internal lighting show and a clean build.   Adjustable Fan Speed Controller With a convenient manual switch at the front panel, you are able to adjust fan speeds fast and easily. It’s no longer necessary to control via complicated software.     Abundant for Multiple USB Devices The front panel is equipped with two USB 3.0 ports and two USB 2.0 ports, let you easily connect multiple peripheral devices and accessory charging. Not only optimize your processing experiences, but also keep all USB devices without limitations. Massive Expandability MX331-T allows you to fit a full-sized ATX motherboard, 350mm-length graphic card, one 5.25” devices, two 2.5” SSDs, and two 3.5” HDDs, which satisfy your expandability and storage needs.     Strong Cooling You can install up to five fans and a 240mm water cooling radiator to protect your investment from the threat of overheating. Water cooling radiator support   Air cooling support?     Minimalist Beauty The case’s PSU and 3.5” bay cover provide a clean view of your case and keep the airflow strong.  

The PA-20 Portable Data Terminal (PDT) is a high performance wireless handheld mobile data capture device that scans and stores bar code data for upload to computer. The compact, industrial strength PA-20 features a superior scanner, large 16MB RAM memory, a color display, and a bold exterior design.Bluetooth capability allows wireless communication with peripheral devices within 30 meters. The PA-20 also supports RS-232 for transmitting data to a variety of devices, as well as USB for high speed transmission. Ideal for intensive commercial uses, the PA-20 is shockproof, dustproof, and waterproof in compliance with IP54. The ergonomic, professional keypad and pistol grip are made of wear-resistant rubber and are comfortable to operate. For dark environments the keypad uses a white backlight, and the PA-20 also vibrates for scanning confirmation in noisy or noise-sensitive environments. A 2.4-inch color LCD screen supports 12-, 16- and 24-dot fonts as well as multiple languages. The PA-20 offers tough connections via Pogo Pin and Cradle and high quality cable connections, so broken connections are not an issue. Rechargeable standard and pistol grip batteries provide extended battery life for longer scanning operation. Accessories include single cradle, four-slot cradle, holster with belt loop, charging and communication cable. 1 Sharp and bright color TFT QVGA display 2 Ergonomic, compact, robust and lightweight 3 Bluetooth technology 4 1.2m(4 ft) drop resistance 5 IP54 protection class 6 Quick attach handle 7 Extremely long operation hours

【USB-C Hub Multiport Adapter 】Expand a single USB-C port to connect more,Vilcome 4 in 1 USB-C to ethernet adapter features a 1000Mbps RJ45 gigabit port, 3 USB 3.0 ports. And all hub ports can work simultaneously. 【5Gbps Data Transfer】This Type C Ethernet Adapter offers extra 3 USB 3.0 ports for connecting multiple USB peripheral devices such as flash drive, hard drive, keyboard, mouse, printer and more,keep you away from the trouble of plugging & unplugging your devices repeatedly.You can also transfer an HD movie in seconds. 【Plug to Play】No need to install any drivers,provides access to superfast network speeds 1000Mbps,just plug and play,and makes it possible for computers without an Ethernet port to connect to an Ethernet cable. 【Compatibility】Perfect for new laptops with USB-C port 【Compact Design】Vilcome USB C Network Adapter is compact and lightweight,easy to carry. Premium aluminium case design make this hub durable to use.

The ViewSonic® VPC10-WP-3 Windows slot-in PC is the ideal integrated solution for delivering smart whiteboard and smart meeting room functionality on ViewSonic® ViewBoard® interactive flat panel. This slot-in PC module supports high-definition audio and video, and easily plugs into compatible displays. With wireless Wi-Fi dual band and Bluetooth, a powerful Intel® Core™ i5 processor, 8GB DDR4 memory, and a 128GB SSD storage (up to 256GB), the VPC10-WP-3 contains the computing power needed to operate CPU intensive applications. Connectivity options including 4K DisplayPort, HDMI, VGA, USB 3.0 ports, and Gigabit LAN RJ45 ensure that you stay connected to any and all peripheral devices.

USB3.0 ultra-high speed transmission rate, transfer rate up to 5Gbps per second. Backward compatible with USB2.0, USB1.1 Support hub and peripheral devices Plug and Play and Hot Plug function 4 Port current overload detection and protection function design Built-in LED indicator can display USB power supply, DC power supply Transmission rate: 5Gbps Connection interface: USB 3.0 x 4 USB cable length: 30CM

USB3.0 ultra-high speed transmission rate, transfer rate up to 5Gbps per second. Backward compatible with USB2.0, USB1.1 Support hub and peripheral devices Plug and Play and Hot Plug function 4 Port current overload detection and protection function design Built-in LED indicator can display USB power supply, DC power supply Transmission rate: 5Gbps Connection interface: USB 3.0 x 4 USB cable length: 1M

UGreen Thunderbold 4 Type-C To Type-C 100W 8K 2.6ft UGreen Thunderbold 4 Type-C To Type-C 100W 8K 2.6ft Price in Pakistan 40Gbps Blazing-fast Data Transfer: UGREEN 40Gbps Thunderbolt 4 Cable offers 4X faster data transfer speed than USB 3.1 Gen 2, transferring 10GB music, movies, or entire seasons of TV shows in only 5 seconds. 8K Crystal-clear Video Display: Supports connecting up to [email protected] high resolution display to enjoy visual feast in stunning ultra-HD quality, or displays media on two 4K screens at the same time. 100W PD Powerful Charging: Provides rapid charging power up to 100W at 20V/5A max and is compatible with rapid charging protocols, including Power Delivery. It takes only 2 hours to fully charge your Macbook Pro. Future-proofed Backward compatibility: Backwards compatible with Thunderbolt 4, Thunderbolt 3, USB 4, USB 3.2/3.1/3.0, USB-C Gen 1/2, USB 2.0. Compatible with 2016+ Macbook Pro, 2017+ iMac, 2017+ iMac Pro, 2020+ Macbook Air, Windows Thunderbolt 3/4 Laptop & PCs, Thunderbolt Docking Stations, High Speed Storage and Peripheral Devices. Certified Safe: UGREEN Thunderbolt 4 cable ensures reliability and durability, including built-in over-voltage protection, over-current protection, short-circuit protection, over-temperature protection.

Description: DigitalPersona U.are.U 4500 Finger Print Reader for Time Attendance The U.are.U 4500 reader is a USB fingerprint reader featuring an elegant, sleek design with a soft, cool blue glow and, of course, the unsurpassed performance DigitalPersona is known for. Made for power-users and shared environments, the 4500 is the natural choice for those that want and need the very best. Features: Blue LED Soft, cool blue glow fits into any environment. Provides a pleasing presence; doesn't compete in low light environments, such as restaurants, or conflict with alarm condition colors, such as in healthcare. Small form factor Conserves valuable desk space. Rugged construction High-quality metal casing weighted to resist unintentional movement. Special undercoating Stays where you put it because of a special undercoating. Rotation invariant Touch it from any direction, it still provides a high quality image and matching performance, perfect for shared environments. Excellent image quality High-quality optics ensure best image every time. Works well with dry, moist, or rough fingerprints Reliable performance over the widest population of users. Reads even the most difficult fingerprints. Technical Information: General · Device Type: Fingerprint reader · Enclosure Type: External · Interface Type: USB · Approximate Width: 1.4 in · Approximate Depth: 2.6 in · Approximate Height:: 0.6 in · Approximate Weight 3.7 oz Fingerprint Reader · Capture Area: 0.57 in x 0.71 in · Resolution: 512 dpi x 512 dpi · Image Depth: 8-bit (256 gray levels) · Features: Data encryption, rotation invariant Video · Features: USB 2.0 compatibility Expansion / Connectivity · Connections: 1 x USB - 4 pin USB Type A Miscellaneous · OK Notification: LED indicator · Cables Included: 1 x USB cable - 6 ft · Device Features: USB powered · Compliant Standards: FCC Class B certified, CE, BSMI, WHQL, MIC, ICES Software / System Requirements · OS Required: Microsoft Windows 2000 Server, Microsoft Windows Server 2003, Microsoft Windows 7 / Vista / 2000 / XP · Peripheral / Interface Devices: USB port (compatible with 2.0 specification) Environmental Parameters · Min Operating Temperature: 32 ?F · Max Operating Temperature: 104 ?F · Humidity Range Operating: 20 - 80%

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 128V Audio DSP Mixer with express shipping all over Pakistan.   The CONVERGE Pro 2 128V Audio DSP Mixer from ClearOne is a complete conferencing solution with 12 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in VoIP interface for 2 lines. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection. The mixer comes with built-in VoIP for VoIP conferencing. The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.   Features: Architecture • 12 mic/line inputs with AEC •  Built-in VoIP for 2 lines •  Built-in USB for PC-based conferencing Scalable Connectivity •  Standalone and daisy-chained system •  Stack up units up to 96 mic/line inputs •  Expansion bus C-Link with 64 channels •  P-Link bus to connect 6 peripherals Configuration & Management •  CONSOLE software •  Auto-discovery of devices •  Matrix View for entire system •  FlowView for visualized audio signal paths •  System monitoring and troubleshooting Audio Signal Processing •  Acoustic Echo Cancellation processing •  Distributed Echo Cancellation on every mic input •  Noise cancellation with Adaptive-Ambience •  Acoustic Intelligence with faster convergence •  DARE feedback elimination •  Microphone gating Flexible Control Options •  Dialer app for Windows, Mac, iOS, and Android •  Tabletop controller with a touch panel •  Wall controller with buttons •  Web-based controller Supports 3rd-party control modules   Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) VoIP Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation Audio: 5 lines (2 default + 3 lines through license), each line supporting 1+5 calls Sample Rate: 24 kHz Sample Bit Depth: 24-bit Codec: G.711 uLaw, G.711 ALaw, G.722 Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: Proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 48T Audio DSP Mixer with express shipping all over Pakistan.     The CONVERGE Pro 2 48T Audio DSP Mixer from ClearOne is a complete conferencing solution with 4 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in Telco interface for teleconferencing. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection.   The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.     Features: Architecture • 4 mic/line inputs with AEC •  Built-in Telco with ClearEffect processing •  Built-in USB for PC-based conferencing Scalable Connectivity •  Standalone and daisy-chained system •  Stack up units up to 96 mic/line inputs •  Expansion bus C-Link with 64 channels •  P-Link bus to connect 6 peripherals Configuration & Management •  CONSOLE software •  Auto-discovery of devices •  Matrix View for entire system •  FlowView for visualized audio signal paths •  System monitoring and troubleshooting Audio Signal Processing •  Acoustic Echo Cancellation processing •  Distributed Echo Cancellation on every mic input •  Noise cancellation with Adaptive-Ambience •  Acoustic Intelligence with faster convergence •  DARE feedback elimination •  Microphone gating Flexible Control Options •  Dialer app for Windows, Mac, iOS, and Android •  Tabletop controller with a touch panel •  Wall controller with buttons •  Web-based controller •  Supports 3rd-party control modules     Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Amplifier Output Speaker Output Port: Dual binding posts Audio: 2 x Channel Output Power: Maximum 10 W, 8 Ohms load Frequency Response: 20 Hz to 22 kHz @ +10 dBu, +/- 0.5 dBu THD + N: 20 Hz to 22 kHz @ +10 dBu, 1 W, Dynamic Range: 20 Hz to 22 kHz @ 20 dB, >102dB, with 20 kHz digital low pass filter Crosstalk: Channel to Channel, stimulus at 20 dBu, 10 W output to receptor 8⿦ load, 20 Hz to 22 kHz, Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 128 DSP Mixer with express shipping all over Pakistan.   The Converge Pro 2 128 DSP Mixer with 12 Mic/Line Inputs from ClearOne is a 1 RU digital audio processor for conferences and sound reinforcement. Signal processing has been upgraded to offer world-beating echo cancellation, adaptive noise reduction, and advanced feedback suppression in speech applications for boardrooms, conference rooms, lecture halls, training rooms, courtrooms, houses of worship, and more. Smaller conference rooms can use a single Converge Pro 2 processor. It is ideal for connecting up to three Beamforming Microphone Arrays and up to three DIALOG 20 dual-wireless microphones (sold separately). All these devices use a single P-Link peripheral connection up to 200' apart. Additional line inputs and podium microphones can be connected into the 12 mic/line inputs. Additionally, a USB port connects your computer, which allows you to connect to any standard conferencing platforms, including ClearOne Spontania.   Features: • 12 Mic/Line inputs with AEC • Built-in USB for Windows-based conferencing • Adaptive ambient noise cancellation with DARE feedback elimination • Advanced microphone gating • Dialer app for Windows, Mac, iOS, Android tabletop controller with touch panel • Control from wall, web, or third party connection   Specifications: Mic/Line Inputs 12 Line Outputs 8 USB Connects to your computer for industry standard conferencing platforms Ethernet Yes RS232 Connection Yes GPIO Yes P-Link Connector 2 x P-link C-Link Connector 2 x C-link Dimensions Not specified by manufacturer Weight Not specified by manufacturer

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 128T Audio DSP Mixer with express shipping all over Pakistan.   The CONVERGE Pro 2 128T Audio DSP Mixer from ClearOne is a complete conferencing solution with 12 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in Telco interface for teleconferencing. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection. The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.   Features: Architecture 12 mic/line inputs with AEC Built-in Telco with ClearEffect processing Built-in USB for PC-based conferencing Scalable Connectivity Standalone and daisy-chained system Stack up units up to 96 mic/line inputs Expansion bus C-Link with 64 channels P-Link bus to connect 6 peripherals Configuration & Management CONSOLE software Auto-discovery of devices Matrix View for entire system FlowView for visualized audio signal paths System monitoring and troubleshooting Audio Signal Processing Acoustic Echo Cancellation processing Distributed Echo Cancellation on every mic input Noise cancellation with Adaptive-Ambience Acoustic Intelligence with faster convergence DARE feedback elimination Microphone gating Flexible Control Options Dialer app for Windows, Mac, iOS, and Android Tabletop controller with a touch panel Wall controller with buttons Web-based controller Supports 3rd-party control modules   Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: Proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)