Output voltage

DESCRIPTION DC-VOLTAGE REGULATOR ADJUSTABLE Series LM317 SOT-223 SMD High performance upto 0.1% load regulation and 0.01% line regulation Output voltage range adjustable from 1.25 V to 37 V • Output current greater than 1.5 A • Internal short-circuit current limiting • Thermal overload protection • Output safe-area compensation Data sheet link: ti.com/lit/ds/symlink/lm317.pdf Copy/past above link to search bar.! Mention that you found this ad on DealMarkaz.pk when you call.

MS7221 Mastech Features: Measures Loop Current Signals Measures Process Signals from PLC Simulates 24mA Loop Current to Output we have wide range of multimeters For Price and more detail contact us Now Buy Online Shipping All Across Pakistan COMPANY: MATRIX ELECTRONICS CONTACT PERSON: FAIZAN MUNIR Mobile:0 3002785860 w w w .matrixelectronic . com Email : sales @ matrixelectronic . com Address: Shop#2, Hassan Centre Near Passport Office Saddar karachi

Module Properties: non-isolated step-up module (BOOST) 65 * 36.5 * 23 (length * width * high) (mm) Input voltage:10-32V Output voltage: 12-35V (adjustable) Output Current: 5A (MAX) Input Current: 10A (MAX) (Please enhance heat dissipation if more than 10A) Output power: natural cooling 100W (MAX), enhance heat dissipation 150W (MAX) Easy to drive 65W 90W dual-core notebook. Use a 12V battery drive 19V 3.42A notebook, the module temperature about 45c Conversion efficiency: 94% (measured at Input 16V, output 19V 2.5A) Output Ripple: 2% (MAX) 20M-bandwidth Operating Temperature: Industrial (-40c to +85c) (ambient temperature exceeds 40c, lower power use, or to enhance heat dissipation) Full load temperature rise: 45c No-load current: 25mA typical Voltage regulation: 0.5% Dynamic response speed: 5% 200uS Short circuit protection: None (Please Install fuses and protection circuits at Input port.) Input Reverse Polarity Protection: None (Please Series diode at the input port.)Some Applications: 1. DIY an output adjustable vehicle power supply, connect the 12V input, and output could be 14-35V(adjustable freely), However, the output voltage can not be less than the input voltage. 2. Car laptop power supply: connected to 12V power supply, output voltage regulation as your notebook need.

Sample is available Product Specifications: PHASE: 3-phase in / 3-phase out CAPACITY: 10000 VA / 8000 W INPUT Nominal Voltage:3 x 400 VAC (3Ph+N) Input Voltage Range: 305-478 VAC (3-phase) at 100% load ; 190-520 VAC (3-phase) at 50% load Frequency Range: 46~54 Hz or 56~64Hz Power Factor: no less than 0.99 at100% Load OUTPUT Output Voltage: 3 x 400 VAC (3Ph+N) AC Voltage Regulation (Batt. Mode) : +/- 1% Frequency Range (Synchronized Range): 46~54Hz or 56~64Hz Frequency Range (Batt. Mode): 50 Hz +/-0.1 Hz or 60 Hz +/- 0.1 Hz Current Crest Ratio: 3:1 (max.) Harmonic Distortion: no more than 2 % THD (Linear Load) ; no more than 5 % THD (Non-linear Load) Transfer Time AC Mode to Batt. Mode: Zero Inverter to Bypass: Zero Waveform (Batt. Mode): Pure Sinewave EFFICIENCY AC Mode: 89% Battery Mode: 86% BATTERY Standard Model Battery Type:12 V / 9 Ah Numbers:20 pcs (18 - 20 adjustable) Typical Recharge Time: 9 hours recover to 90% capacity Charging Current: 1A Charging Voltage: 273 VDC +/-1% Long-run Model Battery Type: Depending on the capacity of external batteries Charging Current: 4A Charging Voltage: 273 VDC +/-1% PHYSICAL Standard Model Dimension, DxWxH (mm): 815 x 250 x 826 Net Weight (kgs):109 Long-run Model Dimension, DxWxH (mm): 592 x 250 x 826 Net Weight (kgs):38 Online Ups (Commercial ,Industrial Ups & Medical Grade Ups) Single Phase & Three Phase Ups Double Conversion & Delta Conversion Online Ups System 1kva to 200kva Imported Series Power Line Conditioners (Single Phase & Three Phase Auto And Isolated) 2kva to 30kva Ups Pure Sine Wave Inverter 1kva to 10kva Built-In Stabilizer & Hybrid Solar System 1kw to 50kw Solar Panel (European Brands) Batteries Stabilizer/AVR (Single Phase & Three Phase) 2kva to 30kva Isolation Transformer (Single Phase & Three Phase) 2kva to 40kva Hybrid Solar System Pure Sine Wave Built-In Stabilizer & Solar Charger Patrol Pumps Dispensers Solar Systems Telecom BTS Hybrid Solar Solution 1kw to 15kw Telecom Tower Inverter / UPS Telecom Rectifiers 48V / 24V / 110V System Capacities 24 Volts DC – 30 Amp to 100 Amp 48 Volts DC – 30 Amp to 100 Amp UPS Range: Online Low Frequency UPS (With transformer): External Battery Online High Frequency UPS (Without transformer): built-in or external battery available Single Phase: 1kva, 2kva, 3kva,6kva,10kva,15kva,20kva,30kva 3/1 Phase: 10kva,15kva,30kva,30kva,40kva 3/3 Phase: 10kva, 15kva, 20kva, 30kva, 40kva, 60kva, 80kva, 100kva, 120kva, 150kva, 160kva, 200kva, 250kva, 300kva, 350kva, 400kva, 600kva Offline UPS: 400va, 450va, 500va, 600va, 650va, 700va, 750va, 800va, 1000va, 1200va, 1500va, 2000va, 3000va(1-3kva both built-in and external battery available) If You Have Any Concerns Then Feel Free To Contact Me. Best Regards, Ahmed Pakistan Karachi Lahore Islamabad Faisalabad Peshawar

Mounting Style: Through Hole Package/Case: TO-220 Number of Outputs: 1 Output Polarity: Positive Output Voltage: 15 V Output Current: 1.5 A Output Type: Fixed Input Voltage MAX: 35 V Input Voltage MIN: 17 V Minimum Operating Temperature: 0 C Maximum Operating Temperature: + 125 C Load Regulation: 300 mV Line Regulation: 300 mV Series: L78 Height: 9.15 mm (Max) Length: 10.4 mm (Max) Width: 4.6 mm (Max)

This product is a non-isolated step-down module, the input voltage is DC3-38V, and the output voltage is 1.25~36VThe maximum output current is 5A, the maximum is 150W; it has a constant voltage and constant current dual adjustment function, high,High efficiency, it can be used as a charg adapter or directly connected to a load.

The tester uses a new generation of power four semis ~ double loop integral converter IC, with a precision bandgap reference, range accuracy, high precision, stable and reliable performance, strong anti~interference ability, high temperature can be used for measuring USB powered or power consumption of the interface, mobile phone charger, U disk, and other products. USB powered devices can be used to measure air, voltage loads, USB terminal equipment working voltage, and current. The current and voltage cycle, easy to use, and practical. Compact and easy to carry, no additional power supply. Measure the performance of devices. Measure the performance of the USB chargers. It can easily measure the USB (PC USB, cell phone charger, car charger, mobile power, etc.) port and device operating current and the output voltage charge-discharge capacity. Voltage range: 3.0V-9V Current range: 0-3.0A Dimensions: 73.4 (L) * 28.1 (W) * 14.8 (H) mm Display data: voltage and current Own consumption: <10mA Weight: 21.4g Display Material: Dual 3 Digit Seven Segment LED Display for voltage and current 1 x Dual LED Display USB Current Voltage Meter Battery Tester

Features:1.Operating Voltage: 13.5-30V.2.Input Frequency Range: 0-1KHz.3.Output voltage fine tuning4.Adjusting potentiometer can calibrate the relationships between frequency and voltage.5.Signal input port adopts optocoupler isolation, it guarantees good anti-interference capacity6.F/V converter module, response time is 0.3-0.5s. If you want to adjust frequency by a large margin, it needs some time to response7.Working temperature:-25~85℃

DC Voltage Output: 12V AC Voltage Input Support: 100V to 240V Max. Output Wattage: 18W Max DC Amp output Range: 1.5A (1500mA) Short Circuit Protection:Over Voltage Protection Over Amp Protection Coaxial Connector Size:Inner Diameter: 2.1mm Outer diatmeter: 5.5mm Polarity: Center Positive

L7809 Regulator Features 9V Positive Voltage Regulator. Minimum Input Voltage is 11V. Maximum Input Voltage is 35V. Output Current: 1.5 A. PSRR / Ripple Rejection: 55 dB. Output Type: Fixed. Internal Thermal Overload and Short circuit current limiting protection is available. Junction Temperature maximum of 125 degree Celsius.

7805 Regulator Features 5V Positive Voltage Regulator. Minimum Input Voltage is 7V. Maximum Input Voltage is 25V. Output current to 0.5 A Output voltages of 5V Operating current(IQ) is 5mA. Internal Thermal Overload and Short circuit current limiting protection is available. Junction Temperature maximum 125 degree Celsius. Available in TO-220

BrandName：Partstron Voltage：110V Voltage：220V ModelNumber：H020 Type：H7498 Condition：Compatible Model1：Pro1606DNM1536DNFP1566P1566DNCP1525CP1525n

  Input 80V-260V Output 110/ 220V Tower LCD DISPLAY 1000VA 12 month warranty Price (10625) Voltage Stabilizer Brand Powerage / TTN 1KVA to 500kVA Type: Servo Motor Single phase & 3 phases available With 12 months warranty Karachi / Hyderabad/ Quetta /Islamabad Daman EQUIPMENT islamabad 03089299846 https://damanequipment.business.site

  Output Power Capacity 1400 Watts / 2000 VA Max Configurable Power 1400 Watts / 2000 VA Nominal Output Voltage 230V Output Voltage Note Configurable for 220: 230 or 240 nominal output voltage Output Voltage Distortion Less than 3% Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz user adjustable +/- 0.1 Other Output Voltages 220, 240 Crest Factor 3: 1 Waveform Type Sine wave Output Connections (6) IEC 320 C13 (2) IEC Jumpers Bypass Built-in Bypass

Output voltage: default 5 V, automatically adjust between 3-12 V after fast charge activationOutput power: up to 24 W (5 V / 3.4A, 9 V / 2.5 A, 12 V / 2A, etc.)Output voltage for compensation function cableConversion efficiency: 90% -97%Support for multiple fast charging protocols Output voltage: default 5 V, automatically adjust between 3-12 V after fast charge activation Output power: up to 24 W (5 V / 3.4A, 9 V / 2.5 A, 12 V / 2A, etc.) Output voltage for compensation function cable Conversion efficiency: 90% -97% Support for multiple fast charging protocols

  Voltage Required. AC 230 V. Input Voltage Range. AC 160 - 286 V. Power Output Connectors Details. 4 x power IEC 60320 C13. Output Voltage. AC 220/230/240 V 5% - 47 - 53 / 57 - 63 Hz. Power Capacity. 980 Watt / 1500 VA. Surge Suppression. yes. Surge Energy Rating. 480 Joules. Power Provided. 980 Watt.

  Output power capacity 3.5kWatts / 5.0kVA Rack Height 3U Output Connections (8) IEC 60320 C13 (Battery Backup) (4) IEC Jumpers (Battery Backup) (2) IEC 60320 C19 (Battery Backup) Nominal Output Voltage 230V Nominal Input Voltage 230V Input Connections Hard wire 3-wire APC Smart-UPS RT 5000VA 230V Harsh Environment High density, double-conversion on-line power protection with scalable runtime Includes: CD with software, Smart UPS signalling RS-232 cable, User manual, Web/SNMP management card

Output: 5V / 2A AC Input Voltage: 100 AC - 240 AC (50HZ - 60HZ) Output Voltage (V) / Current (A): 5V2A (max) Compatible With Every Android TV Devices

Output Power Capacity: 8000 Watts / 10 kVA Max Configurable Power: 8000 Watts / 10 kVA Output Voltage: 230 V

Output Voltage: 19V Power Capacity: 90 Watt Suited for most HP Laptops 4.7A Fast and Safe Charging

DESCRIPTION Input voltage: 2V ~ 24V Output voltage: Up to 28V Efficiency: ~93% On board preset: Adjust Output Voltage (Multi Turns 20 Turns) Input voltage: should not exceed the maximum input voltage Peak current: output current should not more than 2A Output voltage: should always be higher than Input voltage PCB Size: 30 mm * 17 mm * 14 mm Method Of Use: The module of the IN+ and – after 2~24v, IN adjusting the potentiometer can adjust output voltage, output voltage is greater than the input voltage. Mention that you found this ad on DealMarkaz.pk when you call.

DESCRIPTION Input Voltage 12V Socket Output Voltage 220V Socket Output Watts 220W USB Output Voltage 5V Over Voltage Protection Indicator Light Input Voltage 12V Socket Output Voltage 220V Socket Output Watts 220W USB Output Voltage 5V Over Voltage Protection Indicator Light عدن کمیونیکیشن کلیارچوک جرنیلی روڈکندیاں میانوالی, Kundian, Mianwali, Punjab, Pakistan

DESCRIPTION Feature: Can be easily installed in a variety of small devices. Use Micro USB input,USB charger or mobile power through the data line,to get 9V,12V,15V,18V,24V Portable and easy to use. Ultra wide input and output voltage, high conversion efficiency. Specifications: Product size:3cm×1.7cm Input voltage: 2 v – 24v Max output current: 2A non continuous Recommended continuous max 1A Max output voltage: > 28 V (recommended for use within 26V) Efficiency: > 93% (efficiency is related to the differential pressure of input and output). Note: 1) this module is a boost module, the output voltage is greater than the input voltage 2) the peak current output current is no more than 2A Mention that you found this ad on DealMarkaz.pk when you call.

  Technical Specifications Max Configurable Power (Watts) 4.2kWatts / 6.0kVA. Output Voltage Note. Configurable for 220: 230 or 240 nominal output voltage. Output Voltage Distortion. Less than 3 % Output Frequency (sync to mains)... Other Output Voltages.... Load Crest Factor.... Topology.... Waveform type.

MS5202 MASTECH Digital/analogue megger Mastech MS5202 is used to measure insulation resistance in the current-carrying elements of high-voltage power networks. The device meets the requirements of IEC1010-1 CAT II 5000V standard. The measurement results are shown by means of a big pointer indicator with a mirror scale meant for increasing of measurement accuracy. The digital display shows output voltage. Since the insulation resistance testing requires high voltage (up to 2,5 kV), the Mastech MS5202 uses a double confirmation system for test setup and control over operation. The case ofDigital/Analogue Insulation Tester MASTECH MS5202 is dampproof. The tester is powered from 8 x AA 1,5 V batteries and 1 x 6F22 9 V battery. Features: Designed according to the IEC1010-1 standard CAT II 5000V Analogue and digital display Inner battery test function is provided Double test switch is to avoid inncorrect operation Unique design is to protect inner circuit from wet and cankerous air The instrument tests insulation up to 100000 MΩ at 2500 V Insultation resistance accuracy (analog display): 100 ~ 50000 MΩ ± 2.5%, 0 ~ 100 MΩ/50000 ~ 100000 MΩ ±3.0% Automatic range control Output voltage (digital display): 2500 V±5.0% (100 ~ 50000 MΩ) Battery powered: 1.5 V (UM3, AA) x 8, 9 V (6F22) x 1 Size: 225 x 135 x 81 mm Now Buy Online Shipping All Across Pakistan COMPANY: MATRIX ELECTRONICS CONTACT PERSON: FAIZAN MUNIR Mobile:03002785860 Email : sales@matrixelectronic.com Email : info@matrixelectronic.com www.matrixelectronic.com

Description: Details iShopping.pk brings you the best price for TP-Link 2.4GHz 300Mbps 9dBi Outdoor CPE (CPE210) with express shipping all over Pakistan.   Features: • Built-in 9dBi 2x2 dual-polarized directional MIMO antenna •  Adjustable transmission power from 0 to 27dBm/500mw •  System-level optimizations for more than 5km long range wireless transmission •  TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications •  Centralized Management System – Pharos Control •  AP / Client / Bridge / Repeater / AP Router / AP Client Router (WISP) operation modes •  Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely • Outdoor stabilized enclosure with IPX5 waterproof certification • Dual Ethernet ports and grounding terminal integrated • 6KV Lightning Protection, 15KV ESD Protection • Provides WEP, WPA/WPA2, WPA-PSK/WPA2-PSK data security • Selectable bandwidth of 5/10/20/40MHz • Provides Throughput Monitor, Spectrum Analyzer, Speed Test and Ping tools • Easy antenna alignment with wireless signal quality indicators via Web interface   Specification: HARDWARE Processor Qualcomm Atheros 560MHz CPU, MIPS 74Kc Memory 64MB DDR2 RAM, 8MB Flash Interface 1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in) 1 10/100Mbps Shielded Ethernet Port (LAN1, Passive PoE Passthrough) 1 Grounding Terminal 1 Reset Button Power Supply Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins) Voltage range: 16-27VDC Power Consumption 10.5 Watts Max Note: When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable. Dimensions (W x D x H) 224 x 79 x 60 mm Antenna Type Built-in 9dBi 2x2 Dual-polarized Directional Antenna Beam Width: 65° (H-Plane) / 35° (E-Plane) Note: For more details, please refer to datasheet Protection 15KV ESD Protection 6KV Lightning Protection Enclosure Outdoor ASA stabilized plastic material IPX5 waterproof Certification WIRELESS  Wireless Standards IEEE 802.11b/g/n (with Pharos MAXtream disabled) Proprietary Protocol TDMA Mode (with Pharos MAXtream enabled) Wireless Speeds Up to 300Mbps (40MHz,Dynamic) Up to 144.4Mbps (20MHz,Dynamic) Up to 72.2Mbps (10MHz,Dynamic) Up to 36.1Mbps (5MHz,Dynamic) Frequency 2.4~2.483GHz Note: Available operating frequency may vary depending on the limitations of the countries or regions in which the device is used. Transmission Power 27dBm/500mw (Adjustable power by 1dBm) Note: Maximum transmission power may vary across different channels depending on the limitations of the countries or regions in which the device is used. SOFTWARE Wireless Configurations Pharos MAXtream TDMA Technology 802.11b/g/n Modes Selectable Channel Width: 5/10/20/40MHz Automatic Channel Selection Transmission Power Control Dynamic Frequency Selection (DFS) WDS Enable/Disable Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption SSID Broadcast Enable/Disable Multi-SSID with VLAN Tagging (AP mode only) Distance/ACK Timeout Setting Wireless MAC Address Filter Wireless Advanced: > Beacon Interval/RTS Threshold/Fragmentation >Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia Management Discovery and Remote Management via Pharos Control application HTTP/HTTPS Web-based management System Log SNMP Agent(v2c) Ping Watch Dog Dynamic DDNS SSH Server System Tools Wireless Signal Quality Indicators: Signal Strength/Noise/Transmit CCQ/CPU/Memory Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP Spectrum Analyzer Speed Test Ping Traceroute System-level Optimizations Optimized IGMP Snooping/Proxy for multicast applications Hardware watch dog POE ADAPTER Dimensions(W x D x H) 110*57*33.5mm Input Current 0.8A Max @ 100VAC Input Voltage 100VA~240VAC @ 50Hz~60Hz Output 24VDC, 1.0A Max +4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet) Efficiency >80% Output Voltage 24VDC(+4,5pins; -7,8pins) Input 100-240VAC, 50/60Hz Power Status LEDs 0~0.8A: Green 0.8A~1.0A: Red Certifications CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark Interfaces 1 AC Jack with Earth Ground 1 10/100/1000Mbps Shielded Ethernet Port (Power + Data) 1 10/100/1000Mbps Shielded Ethernet Port (Data) Button Remote Reset Button OTHERS Certification CE, FCC, RoHS, IPX5 System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux. Note: We recommend you to use one of following Web browsers for an improved user experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended. Environment Operating Temperature: -30°C~70°C (-22℉~158℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~95% non-condensing   TP-LINK’s 2.4GHz 300Mbps 9dBi Outdoor CPE, the CPE210 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications.  Professional performance, coupled with user-friendly design, makes CPE210 an ideal choice for both business and home users.     Enterprise Hardware With Qualcomm Atheros enterprise level chipsets, high gain antennas and high quality material, specially designed enclosure, and PoE power supply, CPE210 is specially designed for outdoor use and can operate flawlessly in almost any climate, with operating temperatures ranging from -40℃ (-40℉) to +70 ℃ (158℉).   Advanced Antenna System Built-in High Gain Dual-Polarized Antenna  Dedicated metal reflector ensures higher gain  and lower noise interference   5km+ Wireless Data Transmission Specially designed for outdoor uses, ideal for long distance wireless data transmis sion over 5km+, tested in the field.     TP-LINK MAXtream TDMA Technology As network scale increases, wireless competition and collisions among CPEs and base stations will be so enormous that the real throughput of the network will drop, resulting in a serious impact on end-user experience. To mitigate these effects, the CPE210 uses MAXtream TDMA Technology.   Pharos Control – Centralized Management System CPE210 also comes equipped with centralized management software that helps users easily manage all the devices in their network from a single PC - Pharos Control. Functions like device discovery, status monitoring, firmware upgrading, and network maintenance can be managed using Pharos Control.   PharOS User-friendly web-based management system allows professionals to do more specific configurations.

Description: Details iShopping.pk brings you the best price for TP-Link 2.4GHz 300Mbps 12dBi Outdoor CPE (CPE220) with express shipping all over Pakistan.   Features: • Built-in 12dBi 2x2 dual-polarized directional MIMO antenna •  Adjustable transmission power from 0 to 30dBm/1000mw •  System-level optimizations for more than 13km long range wireless transmission •  TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications •  Centralized Management System – Pharos Control •  AP / Client / Bridge / Repeater / AP Router / AP Client Router (WISP) operation modes •  Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely   Specification: HARDWARE Processor Qualcomm Atheros 560MHz CPU, MIPS 74Kc Memory 64MB DDR2 RAM, 8MB Flash Interface 1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in) 1 10/100Mbps Shielded Ethernet Port (LAN1, Passive PoE Passthrough) 1 Grounding Terminal 1 Reset Button Power Supply Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins) Voltage range: 16-27VDC Power Consumption 10.8 Watts Max Note: When deployed using Passive PoE, the power drawn from the power source will  be higher by some amount depending on the length of the connecting cable. Dimensions (W x D x H) 11×3.1×2.1 inch (276×79×60 mm) Antenna Type Built-in 12dBi 2x2 Dual-polarized Directional Antenna Beam Width: 60° (H-Plane) / 30° (E-Plane) Note: For more details, please refer to datasheet Protection 15KV ESD Protection 6KV Lightning Protection Enclosure Outdoor ASA stabilized plastic material IPX5 waterproof Certification WIRELESS Wireless Standards IEEE 802.11b/g/n (with Pharos MAXtream disabled) Proprietary Protocol TDMA Mode (with Pharos MAXtream enabled) Wireless Speeds Up to 300Mbps (40MHz,Dynamic) Up to 144.4Mbps (20MHz,Dynamic) Up to 72.2Mbps (10MHz,Dynamic) Up to 36.1Mbps (5MHz,Dynamic) Frequency 2.4~2.483GHz Note: Available operating frequency may vary depending on the limitations  of the countries or regions in which the device is used. Transmission Power 30dBm/1000mw (Adjustable power by 1dBm) Note: Maximum transmission power may vary across different channels depending  on the limitations of the countries or regions in which the device is used. SOFTWARE Wireless Configurations Pharos MAXtream TDMA Technology 802.11b/g/n Modes Selectable Channel Width: 5/10/20/40MHz Automatic Channel Selection Transmission Power Control Dynamic Frequency Selection (DFS) WDS Enable/Disable Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption SSID Broadcast Enable/Disable Multi-SSID with VLAN Tagging (AP mode only) Distance/ACK Timeout Setting Wireless MAC Address Filter Wireless Advanced: > Beacon Interval/RTS Threshold/Fragmentation >Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia Management Discovery and Remote Management via Pharos Control application HTTP/HTTPS Web-based management System Log SNMP Agent(v2c) Ping Watch Dog Dynamic DDNS SSH Server System Tools                                     Wireless Signal Quality Indicators: Signal Strength/Noise/Transmit CCQ/CPU/Memory Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP Spectrum Analyzer Speed Test Ping Traceroute System-level Optimizations Optimized IGMP Snooping/Proxy for multicast applications Hardware watch dog POE ADAPTER Dimensions(W x D x H) 110×57×33.5mm Input Current 0.8A Max @ 100VAC Input Voltage 100VA~240VAC @ 50Hz~60Hz Output 24VDC, 1.0A Max +4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet) Efficiency >80% Output Voltage 24VDC(+4,5pins; -7,8pins) Input 100-240VAC, 50/60Hz Power Status LEDs 0~0.8A: Green 0.8A~1.0A: Red Certifications CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark Interfaces 1 AC Jack with Earth Ground 1 10/100Mbps/1000Mbps Shielded Ethernet Port (Power + Data) 1 10/100Mbps/1000Mbps Shielded Ethernet Port (Data) Button Remote Reset Button OTHERS Certification CE, FCC, RoHS, IPX5 System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7,  MAC OS, NetWare, UNIX or Linux. Note: We recommend you to use one of following Web browsers for an improved user  experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended. Environment Operating Temperature: -40°C~70°C (-40℉~158℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~95% non-condensing   TP-LINK’s 2.4GHz 300Mbps 12dBi Outdoor CPE, the CPE220 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications.  Professional performance, coupled with user-friendly design, makes CPE220 an ideal choice for both business and home users. Enterprise Hardware With Qualcomm Atheros enterprise level chipsets, high gain ante nnas and high quality material, specially designed enclosure, and P oE power supply, CPE220 is specially designed for outdoor use and can operate flawlessly in almost any climate, with operating temperatures ranging from -40℃ (-40℉) to +70 ℃ (158℉).     Advanced Antenna System Built-in High Gain Dual-Polarized Antenna  Dedicated metal reflector ensures higher gain  and lower noise interference   13km+ Wireless Data Transmission Specially designed for outdoor uses, ideal for long distance wireless data transmission over 13km+, tested in the field.     TP-LINK MAXtream TDMA Technology As network scale increases, wireless competition and collisions among CPEs and base stations will be so enormous that the real throughput of the network will drop, resulting in a serious impact on end-user experience. To mitigate these effects, the CPE220 uses MAXtream TDMA Technology.   Pharos Control – Centralized Management System CPE220 also comes equipped with centralized management software that helps users easily manage all the devices in their network from a single PC - Pharos Control. Functions like device discovery, status monitoring, firmware upgrading, and network maintenance can be managed using Pharos Control.   PharOS User-friendly web-based management system allows professionals to do more specific configurations.

Description: Details iShopping.pk brings you the best price for TP-Link 5GHz 300Mbps 13dBi Outdoor Access Point (CPE510) with express shipping all over Pakistan.   PharOS User-friendly web-based management system allows professionals to do more specific configurations.   5GHz 300Mbps 13dBi Outdoor CPE  CPE510 • Built-in 13dBi Dual-polarized • Directional Antenna • AP / Client / Repeater / AP Router / AP Client Router (WISP) operation modes • 6KV Lightning Protection • Weather Proof Enclosure • 15KV ESD Protection • Passive PoE Adapter   Specification: HARDWARE FEATURES Processor Qualcomm Atheros Enterprise 560MHz CPU, MIPS 74Kc Memory 64MB DDR2 RAM, 8MB Flash Interface 1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in) 1 10/100Mbps Shielded Ethernet Port (LAN1, Passive PoE Passthrough) 1 Grounding Terminal 1 Reset Button Power Supply Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins) Voltage range: 16-27VDC Power Consumption 10.5 Watts Max Note: When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable. Dimensions (W x D x H) 224 x 79 x 60 mm Antenna Type Built-in 13dBi 2x2 Dual-polarized Directional Antenna Beam Width: 45° (H-Plane) / 30° (E-Plane) Protection 15KV ESD Protection 6KV Lightning Protection Enclosure Outdoor ASA stabilized plastic material IPX5 waterproof Certification WIRELESS FEATURES Wireless Standards IEEE 802.11a/n (with Pharos MAXtream disabled) Proprietary Protocol TDMA Mode (with Pharos MAXtream enabled) Wireless Speeds Up to 300Mbps (40MHz,Dynamic) Up to 144.4Mbps (20MHz,Dynamic) Up to 72.2Mbps (10MHz,Dynamic) Up to 36.1Mbps (5MHz,Dynamic) Frequency 5.15~5.85GHz Note: Available operating frequency may vary depending on the limitations of the countries or regions in which the device is used. Transmission Power 23dBm/200mw (Adjustable power by 1dBm) Note: Maximum transmission power may vary across different channels depending on the limitations of the countries or regions in which the device is used. SOFTWARE FEATURES Wireless Configurations Pharos MAXtream TDMA Technology 802.11a/n Modes Selectable Channel Width: 5/10/20/40MHz Automatic Channel Selection Transmission Power Control Dynamic Frequency Selection (DFS) WDS Enable/Disable Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption SSID Broadcast Enable/Disable Multi-SSID with VLAN Tagging (AP mode only) Distance/ACK Timeout Setting Wireless MAC Address Filter Wireless Advanced: > Beacon Interval/RTS Threshold/Fragmentation >Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia Management Discovery and Remote Management via Pharos Control application HTTP/HTTPS Web-based management System Log SNMP Agent(v2c) Ping Watch Dog Dynamic DDNS SSH Server System Tools Wireless Signal Quality Indicators: Signal Strength/Noise/Transmit CCQ/CPU/Memory Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP Spectrum Analyzer Speed Test Ping Traceroute System-level Optimizations Optimized IGMP Snooping/Proxy for multicast applications Hardware watch dog POE ADAPTER FEATURES Dimensions(W x D x H) 110*57*33.5mm Input Current 0.8A Max @ 100VAC Input Voltage 100VA~240VAC @ 50Hz~60Hz Output 24VDC, 1.0A Max +4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet) Efficiency >80% Output Voltage 24VDC(+4,5pins; -7,8pins) Input 100-240VAC, 50/60Hz Power Status LEDs 0~0.8A: Green 0.8A~1.0A: Red Certifications CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark Interfaces 1 AC Jack with Earth Ground 1 10/100/1000Mbps Shielded Ethernet Port (Power + Data) 1 10/100/1000Mbps Shielded Ethernet Port (Data) Button Remote Reset Button OTHERS Certification CE, FCC, RoHS, IPX5 System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux. Note: We recommend you to use one of following Web browsers for an improved user experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended. Environment Operating Temperature: -30°C~70°C (-22℉~158℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~95% non-condensing   Features: • Built-in 13dBi 2x2 dual-polarized directional MIMO antenna • Adjustable transmission power from 0 to 23dBm/200mw • System-level optimization for more than 15km long range wireless transmission • TP-LINK Pharos MAXtream TDMA(Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency, ideal for PTMP applications • Centralized Management System – Pharos Control • AP / Client / Bridge / Repeater / AP Router / AP Client Router (WISP) operation modes • Outdoor stabilized enclosure with IPX5 waterproof certification • Dual Ethernet ports and grounding terminal integrated • 6KV Lightning Protection, 15KV ESD Protection • Passive PoE Adapter supports up to 60 meters (200 feet) power over Ethernet deployment and allows for device reset remotely • Provides WEP, WPA/WPA2, WPA-PSK/WPA2-PSK data security • Selectable bandwidth of 5/10/20/40MHz • Provides Throughput Monitor, Spectrum Analyzer, Speed Test and Ping tools • Easy antenna alignment with wireless signal quality indicators via Web interface   TP-LINK’s 5GHz 300Mbps 13dBi Outdoor CPE, the CPE510 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications.  Professional performance, coupled with user-friendly design, makes CPE510 an ideal choice for both business and home users.   Enterprise Hardware With Qualcomm Atheros enterprise level chipsets, high gain antennas and high quality material, specially designed enclosure, and PoE power supply, CPE510 is specially designed for outdoor use and can operate flawlessly in almost any climate, with operating temperatures ranging from -30℃ (-22℉) to +70 ℃ (158℉).   Advanced Antenna System Built-in High Gain Dual-Polarized Antenna Dedicated metal reflector ensures higher gain and lower noise interference   15km+ Wireless Data Transmission Specially designed for outdoor uses, ideal for long distance wireless data transmission, covering a range of 15km+, tested in the field.   TP-LINK MAXtream TDMA Technology As network scale increases, wireless competition and collisions among CPEs and base stations will be so enormous that the real throughput of the network will drop, resulting in a serious impact on end-user experience. To mitigate these effects, the CPE510 uses MAXtream TDMA Technology.   Pharos Control – Centralized Management System CPE510 also comes equipped with centralized management software that helps users easily manage all the devices in their network from a single PC - Pharos Control. Functions like device discovery, status monitoring, firmware upgrading, and network maintenance can be managed using Pharos Control.

Description: Details iShopping.pk brings you the best price for AKG CS 5 IRT 1 Small Mountable Infrared Conference Transmitter with express shipping all over Pakistan.   The CS 5 IRT 1 Small Mountable Infrared Conference Transmitter from AKG is a wireless, infrared radiator for the CS 5 Conference System that is capable of transmitting up to seven language translation channels to the CS 5 IRR 7 infrared receivers. The CS 5 IRT 1 is the smaller of the two radiator transmitters available for the CS 5 Conference System and it has a transmission coverage area of 6,450 square feet. Each CS 5 IRT 1 comes complete with a mounting bracket for installation on a wall or ceiling.   Features: • Daisychainable with other transmitters via coaxial cable   Specifications: Input/Output Connectors BNC/Coaxial Input Voltage 0-5 V / 50 ohms Output Voltage 0-5 V / 50 ohms Power Voltage 200-240V 50/60Hz, 1.5A or 100-120V 50/60Hz, 3.15A (internally selectable) Wavelength 870 nm Radiated Power 2.5 W Coverage Angle ±22 degrees (50% down) Coverage Area 6,450 sq.ft. / 600 m2 Dimensions (W x H x D) 10.3 x 6.3 x 3.0" (264 x 160 x 77 mm) Weight 5.6 lb (2.5 kg)

Description: Details iShopping.pk brings you the best price for AKG CS 5 IRT 2 Large Mountable Infrared Conference Transmitter with express shipping all over Pakistan.   The CS 5 IRT 2 Large Mountable Infrared Conference Transmitter from AKG is a wireless, infrared radiator for the CS 5 Conference System that is capable of transmitting up to seven language translation channels to the CS 5 IRR 7 infrared receivers. The CS 5 IRT 2 is the larger of the two radiator transmitters available for the CS 5 Conference System and it has a transmission coverage area of 10,750 square feet. Each CS 5 IRT 2 comes complete with a mounting bracket for installation on a wall or ceiling.   Features: • Daisychainable with other transmitters via coaxial cable   Specifications: Input/Output Connectors BNC/Coaxial Input Voltage 0-5 V / 50 ohms Output Voltage 0-5 V / 50 ohms Power Voltage 200-240V 50/60Hz, 1.5A or 100-120V 50/60Hz, 3.15A (internally selectable) Wavelength 870 nm Radiated Power 3.8 W Coverage Angle ±22 degrees (50% down) Coverage Area 10,750 sq.ft. / 1000 m2 Dimensions (W x H x D) 10.3 x 12.1 x 3.0" (264 x 307 x 77 mm) Weight 8.9 lb (4 kg)