Output frequency

Features:1.Operating Voltage: 13.5-30V.2.Input Frequency Range: 0-1KHz.3.Output voltage fine tuning4.Adjusting potentiometer can calibrate the relationships between frequency and voltage.5.Signal input port adopts optocoupler isolation, it guarantees good anti-interference capacity6.F/V converter module, response time is 0.3-0.5s. If you want to adjust frequency by a large margin, it needs some time to response7.Working temperature:-25~85℃

Sample is available Product Specifications: PHASE: 3-phase in / 3-phase out CAPACITY: 10000 VA / 8000 W INPUT Nominal Voltage:3 x 400 VAC (3Ph+N) Input Voltage Range: 305-478 VAC (3-phase) at 100% load ; 190-520 VAC (3-phase) at 50% load Frequency Range: 46~54 Hz or 56~64Hz Power Factor: no less than 0.99 at100% Load OUTPUT Output Voltage: 3 x 400 VAC (3Ph+N) AC Voltage Regulation (Batt. Mode) : +/- 1% Frequency Range (Synchronized Range): 46~54Hz or 56~64Hz Frequency Range (Batt. Mode): 50 Hz +/-0.1 Hz or 60 Hz +/- 0.1 Hz Current Crest Ratio: 3:1 (max.) Harmonic Distortion: no more than 2 % THD (Linear Load) ; no more than 5 % THD (Non-linear Load) Transfer Time AC Mode to Batt. Mode: Zero Inverter to Bypass: Zero Waveform (Batt. Mode): Pure Sinewave EFFICIENCY AC Mode: 89% Battery Mode: 86% BATTERY Standard Model Battery Type:12 V / 9 Ah Numbers:20 pcs (18 - 20 adjustable) Typical Recharge Time: 9 hours recover to 90% capacity Charging Current: 1A Charging Voltage: 273 VDC +/-1% Long-run Model Battery Type: Depending on the capacity of external batteries Charging Current: 4A Charging Voltage: 273 VDC +/-1% PHYSICAL Standard Model Dimension, DxWxH (mm): 815 x 250 x 826 Net Weight (kgs):109 Long-run Model Dimension, DxWxH (mm): 592 x 250 x 826 Net Weight (kgs):38 Online Ups (Commercial ,Industrial Ups & Medical Grade Ups) Single Phase & Three Phase Ups Double Conversion & Delta Conversion Online Ups System 1kva to 200kva Imported Series Power Line Conditioners (Single Phase & Three Phase Auto And Isolated) 2kva to 30kva Ups Pure Sine Wave Inverter 1kva to 10kva Built-In Stabilizer & Hybrid Solar System 1kw to 50kw Solar Panel (European Brands) Batteries Stabilizer/AVR (Single Phase & Three Phase) 2kva to 30kva Isolation Transformer (Single Phase & Three Phase) 2kva to 40kva Hybrid Solar System Pure Sine Wave Built-In Stabilizer & Solar Charger Patrol Pumps Dispensers Solar Systems Telecom BTS Hybrid Solar Solution 1kw to 15kw Telecom Tower Inverter / UPS Telecom Rectifiers 48V / 24V / 110V System Capacities 24 Volts DC – 30 Amp to 100 Amp 48 Volts DC – 30 Amp to 100 Amp UPS Range: Online Low Frequency UPS (With transformer): External Battery Online High Frequency UPS (Without transformer): built-in or external battery available Single Phase: 1kva, 2kva, 3kva,6kva,10kva,15kva,20kva,30kva 3/1 Phase: 10kva,15kva,30kva,30kva,40kva 3/3 Phase: 10kva, 15kva, 20kva, 30kva, 40kva, 60kva, 80kva, 100kva, 120kva, 150kva, 160kva, 200kva, 250kva, 300kva, 350kva, 400kva, 600kva Offline UPS: 400va, 450va, 500va, 600va, 650va, 700va, 750va, 800va, 1000va, 1200va, 1500va, 2000va, 3000va(1-3kva both built-in and external battery available) If You Have Any Concerns Then Feel Free To Contact Me. Best Regards, Ahmed Pakistan Karachi Lahore Islamabad Faisalabad Peshawar

  Output Power Capacity 1400 Watts / 2000 VA Max Configurable Power 1400 Watts / 2000 VA Nominal Output Voltage 230V Output Voltage Note Configurable for 220: 230 or 240 nominal output voltage Output Voltage Distortion Less than 3% Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz user adjustable +/- 0.1 Other Output Voltages 220, 240 Crest Factor 3: 1 Waveform Type Sine wave Output Connections (6) IEC 320 C13 (2) IEC Jumpers Bypass Built-in Bypass

  Output rated power in W 1980 W Maximum configurable power in W 1980 W harmonic distortion Less than 5 % at full load output frequency 47...53 Hz for 50 Hz nominal sync to mains 57...63 Hz for 60 Hz nominal sync to mains UPS type Line interactive Wave type Sine wave nb of power socket outlets 8 IEC 320 C13 2 IEC Jumpers 1 IEC 320 C19 curve equation Efficiency curve fixed loss 0.0104 curve load maximum 100 %

  Technical Specifications Max Configurable Power (Watts) 4.2kWatts / 6.0kVA. Output Voltage Note. Configurable for 220: 230 or 240 nominal output voltage. Output Voltage Distortion. Less than 3 % Output Frequency (sync to mains)... Other Output Voltages.... Load Crest Factor.... Topology.... Waveform type.

  Max Configurable Power (Watts) 600 Watts / 1.0kVA. Output Voltage Distortion. Less than 5 % Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz Sync to mains. Other Output Voltages. 220, 240. Topology. Line interactive. Waveform type. Transfer Time. 6 ms typical: 10 ms maximum

Ethernet IP network uav data video transceiver with RJ45, RS232, RS422, RS485 uav data video transceiver (SG-2400NB) for data communication equipment, with TDD-COFDM two way data communication Wireless network transceiver is newly designed and with AES data encryption and excellent data safety. UAV transceiver uses the advanced data processing technology and leading division COFDM modulation. Drone transceiver has encrypted network data transfer channel and is linked to DTE DCE and used in UAV and military. uav data video transceiver achieves real-time live broadcast, anti-multipath, high-speed mobile data, voice and image duplex module transmission. Model No.: SG-2400NB Ethernet: 10/100BaseT,Auto-MDI/X,IEEE802.3 TCP,UDP,TCP/IP,TFTP,ARP,ICMP,DHCP,HTTP,SNMP,FTP,DNS Power supply: DC7V~17V,6W consumption Output frequency: 2405~2470MHz(adjustable) Output RF power: 100 to 1000MHz Bandwidth: 4MHz / 8MHZ Interface: RJ-45 ethernet; RS232 RS485 RS422 data Resolution: Support 720P and 1080@50/60hz 30 frames Encryption: 128bit AES or 256 bits AES LOS: 8km - 10km NLOS: 1km -2km Characteristics: portable, mini, mobile radio AES Encryption: 128bit or 256 bit encrypted Transmission: two way signal, audio,video and data

OUTPUT DC VOLTAGE:DC 12V RATED CURRENT:DC 3A RATED POWER:36W Output adaptor jack size:Outer Diameter: 5.5mm. Inner Diameter: 2.1-2.5mm RIPPLE&NOISE:120mVp-p SETUP,RISE TIME:500ms,20ms/230VAC HOLD UP TIME(TYP.):30ms/230VAC 25ms/115VAC at full load INPUT VOLTAGE RANGE:AC 100-240V 50/60Hz FREQUENCY RANGE: 47-63HZ EFFICIENCY(Typ.):> 80% LEAKAGE CURRENT:1mA/240VAC ENVIRONMENT:WORKING TEMP -10~+60°C WORKING HUMIDITY: 20-90%RH non-condensing STORAGE TEMP,HUMIDITY:-20~+85°C,10-95%RH TEMP.COEFFICIENT:±0.03%°C(0-50°C) DIMENSION: 126X55X32 mm

OUTPUT DC VOLTAGE:DC 14V. RATED CURRENT:DC 8A. ENVIRONMENT:WORKING TEMP -10~+60°C. WORKING HUMIDITY: 20-90%RH non-condensing. STORAGE TEMP,HUMIDITY:-20~+85°C,10-95%RH. TEMP.COEFFICIENT:±0.03%°C(0-50°C). RATED POWER:112W. INPUT VOLTAGE RANGE:AC 100-240V 50/60Hz. FREQUENCY RANGE: 47-63HZ. EFFICIENCY(Typ.):> 80%. LEAKAGE CURRENT:1mA/240VAC. AUTO RECOVERY. SMART DEVICE. CONVENIENT IN USE.

Output Power: 3W x 2 Impedance: 4ohms Drive Unit: 2.5 inch Frequency Response: 60Hz ~ 20KHz Input Power: 90V/230V Impedance: 4ohms Easy to use Real images attached

Description: Details iShopping.pk brings you the best price for AKG SR420 Wireless Stationary Receiver with express shipping all over Pakistan.   The SR420 from AKG is a wireless stationary receiver featuring a frequency band of 530.025 - 559.000 MHz and a tuning range of up to 30 MHz allowing the use of up to 8 channels simultaneously. The detachable antennas allow the use of professional accessories, such as antenna splitters and remote mounted directional antennas for multi-channel systems. The SR420 includes an audio clip and RF control LED for easy monitoring of your performance, and an adjustable squelch level for secure audio transmission in all environments.   Specifications: Frequency Band Band A: 530.025 - 559.000 MHz Diversity Antenna switching RF Output 10 mW Audio Bandwidth 40 Hz to 20 kHz (±3 dB) Tuning Range Up to 30 MHz Maximum Channel Output Up to eight compatible channels within one frequency band Frequency Selection Fixed frequencies Modulation FM Radio Range 98' (30 m) line of sight (with external antennas further distances achievable) Rack Size 1/2 RU (19") Connectors XLR, balanced output 1/4" phone jack, unbalanced output Dimensions 5.9 x 1.7 x 7.9" (15.0 x 4.4 x 20.0 cm) Weight 22 oz (620 g)

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 48T Audio DSP Mixer with express shipping all over Pakistan.     The CONVERGE Pro 2 48T Audio DSP Mixer from ClearOne is a complete conferencing solution with 4 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in Telco interface for teleconferencing. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection.   The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.     Features: Architecture • 4 mic/line inputs with AEC •  Built-in Telco with ClearEffect processing •  Built-in USB for PC-based conferencing Scalable Connectivity •  Standalone and daisy-chained system •  Stack up units up to 96 mic/line inputs •  Expansion bus C-Link with 64 channels •  P-Link bus to connect 6 peripherals Configuration & Management •  CONSOLE software •  Auto-discovery of devices •  Matrix View for entire system •  FlowView for visualized audio signal paths •  System monitoring and troubleshooting Audio Signal Processing •  Acoustic Echo Cancellation processing •  Distributed Echo Cancellation on every mic input •  Noise cancellation with Adaptive-Ambience •  Acoustic Intelligence with faster convergence •  DARE feedback elimination •  Microphone gating Flexible Control Options •  Dialer app for Windows, Mac, iOS, and Android •  Tabletop controller with a touch panel •  Wall controller with buttons •  Web-based controller •  Supports 3rd-party control modules     Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Amplifier Output Speaker Output Port: Dual binding posts Audio: 2 x Channel Output Power: Maximum 10 W, 8 Ohms load Frequency Response: 20 Hz to 22 kHz @ +10 dBu, +/- 0.5 dBu THD + N: 20 Hz to 22 kHz @ +10 dBu, 1 W, Dynamic Range: 20 Hz to 22 kHz @ 20 dB, >102dB, with 20 kHz digital low pass filter Crosstalk: Channel to Channel, stimulus at 20 dBu, 10 W output to receptor 8⿦ load, 20 Hz to 22 kHz, Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

2 Portable Digital USB Mini Stereo Wired SpeakerHigh Frequency:U-Smart speakers is supported with high OUTPUT RMS 2.5W+2.5WHigh QualityIts drive unite is about 2'' x 2Impedance is about 4 Ohms,Distortion is about 0.3% 1W1KHz,These Usb Speakers are compatible with Laptop, PC, Mobile and Led.2 Portable Digital USB Mini Stereo Wired SpeakerHigh Frequency:U-Smart speakers is supported with high OUTPUT RMS 2.5W+2.5WHigh QualityIts drive unite is about 2'' x 2Impedance is about 4 Ohms,Distortion is about 0.3% 1W1KHz,These Usb Speakers are compatible with Laptop, PC, Mobile and Led.2 Portable Digital USB Mini Stereo Wired Speaker High Frequency:U-Smart speakers is supported with high OUTPUT RMS 2.5W+2.5WHigh QualityIts drive unite is about 2'' x 2Impedance is about 4 Ohms,Distortion is about 0.3% 1W1KHz,These Usb Speakers are compatible with Laptop, PC, Mobile and Led.2 Portable Digital USB Mini Stereo Wired SpeakerHigh Frequency:U-Smart speakers is supported with high OUTPUT RMS 2.5W+2.5WHigh QualityIts drive unite is about 2'' x 2Impedance is about 4 Ohms,Distortion is about 0.3% 1W1KHz,These Usb Speakers are compatible with Laptop, PC, Mobile and Led

1 meter long cable 220 v input 12 V 1 amp outputA+ Quality 100% Generic New and High-Quality Compatible Replacement Adapter Charger Input Voltage: AC 100-240V (Worldwide AC Input) Input Frequency: 50-60Hz Output: 12V Industry Quality: Over Voltage Protection, Over Heat Protection All adapters have been fully tested: Strict Aging Test Strict Material Test Over Voltage Test Over Temperature Test Safety Test 100% Generic New and High-Quality Compatible Replacement Adapter Charger Input Voltage: AC 100-240V (Worldwide AC Input) Input Frequency: 50-60Hz Output: 12V 100% Generic New and High-Quality Compatible Replacement Adapter Charger Input Voltage: AC 100-240V (Worldwide AC Input) Input Frequency: 50-60Hz Output: 12V Industry Quality: Over Voltage Protection, Over Heat Protection All adapters have been fully tested: Strict Aging Test Strict Material Test Over Voltage Test Over Temperature Test Safety Test 100% Generic New and High-Quality Compatible Replacement Adapter Charger Input Voltage: AC 100-240V (Worldwide AC Input) Input Frequency: 50-60Hz Output: 12V

Description: Details iShopping.pk brings you the best price for Cisco Wireless-AC Dual Radio Wave 2 Access Point with 2.5GbE LAN Data Sheet (WAP581-E-K9) with 1 year official warranty and express shipping all over Pakistan   Features: ● Concurrent dual-band radio support offers up to 2.1 Gbps on a 5.0-GHz radio and 600 Mbps on a 2.4-GHz radio to use capacity and coverage most efficiently. ● Robust security, including WPA2, 802.1X with RADIUS secure authentication, and rogue access point detection, help protect sensitive business information. ● Wi-Fi Scheduler allows you to control your Wi-Fi network access during business and non-business hours. ● An integrated Wireless Packet Capture tool assists tech support in troubleshooting. ● Intelligent QoS prioritizes network traffic to help keep critical network applications running at top performance. ● Support for power-saving sleep mode and port control features help increase energy efficiency. ● Workgroup Bridge mode lets you expand your network by wirelessly connecting to a second Ethernet network. ● Support for IPv6 lets you deploy future networking applications and operating systems without costly upgrades. ● Sleek design with multiple internal antennas and a versatile mounting kit allows for installation on a ceiling, wall or desktop. ● Offers limited lifetime hardware warranty provides peace of mind.   Specifications: Standards IEEE 802.11ac, 802.11a, 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (spanning tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), and IPv6 (RFC 2460) Cabling type Category 5e or better Antennas Internal antennas optimized for installation on a wall or ceiling Operating system Linux Software Physical Interfaces Ports 2 GE ports - one 2.5G and second one 10/100/1000 Ethernet, with support for 802.3at at PoE; support is only for port 1 Buttons Reset button Lock slot Slot for Kensington lock LEDs One multifunction LED Physical Specifications Physical dimensions 1.5 x 9.0 x 9.0 in. (38x 229 x 229 mm) (H x W x D) Weight 3 lb (1.4kg) Network Capabilities VLAN support Yes Number of VLANs 1 management VLAN plus 32 VLANs for SSIDs 802.1X supplicant Yes Service Set Identifier (SSID)-to-VLAN mapping Yes Auto-channel selection Yes Spanning tree Yes Load balancing Yes IPv6 Yes ●  IPv6 host support ●  IPv6 RADIUS, syslog, and Network Time Protocol (NTP) Layer 2 802.1Q-based VLANS, 32 active VLANS plus 1 management VLAN Security W-Fi Protected Access (WPA) and WPA2 Yes, including enterprise authentication Access control Yes, management access control list (ACL) plus MAC ACL Secure management Secure HTTP (HTTPS) SSID broadcast Yes Rogue access point detection Yes Mounting and Physical Security Multiple mounting options Mounting bracket included for easy ceiling or wall mounting Physical security lock Kensington lock slot Quality of Service QoS Wi-Fi Multimedia and Traffic Specification (WMM TSPEC) and client QoS Performance Wireless throughput Up to 2.8-Gbps data rate (real-world throughput varies) Recommended user support Up to 200 connective users; 50 active users per radio Multiple Access Point Management Single Point Setup Yes Number of access points per cluster 16 Active clients per cluster 960 Configuration Web user interface Built-in web user interface for easy browser-based configuration (HTTP and HTTPS) Management Management protocols Web browser, Simple Network Management Protocol (SNMP) v3, and Bonjour Remote management Yes Event logging Local, remote syslog, and email alerts Network diagnostics Logging and packet capture Web firmware upgrade Firmware upgradable through web browser; imported or exported configuration file Dynamic Host Configuration Protocol (DHCP) DHCP client IPv6 host Yes HTTP redirect Yes Wireless Frequency Dual concurrent radios (2.4 and 5 GHz) Radio and modulation type Dual radio, orthogonal frequency division multiplexing (OFDM) IEEE 802.11a/n: OFDM (BPSK/QPSK/16QAM/64QAM/256QAM) IEEE 802.11ac: OFDM (BPSK/QPSK/16QAM/64QAM/256QAM) WLAN 802.11n/ac 4 x 4 MU-MIMO at 5 GHz and 3 x 3 MIMO on 2.4 GHz 21 for 20-MHz bandwidth; 9 for 40-MHz bandwidth; 4 for 80-MHz bandwidth 11 for 20-MHz bandwidth; 7 for 40-MHz bandwidth 802.11 dynamic frequency selection (DFS) Data rates supported IEEE 802.11b: DSSS (1/2/5.5/11) IEEE 802.11g: OFDM (6/9/12/18/24/36/48/54) IEEE 802.11n: Refer to the entries for this standard later in this list) IEEE 802.11b: 12.94 MHz IEEE 802.11g: 24.49 MHz EEE 802.11n MCS0 (HT20): 27.44 MHz IEEE 802.11n MCS0 (HT40): 36.18 MHz IEEE 802.11b: 29.76 dBm IEEE 802.11g: 29.24 dBm IEEE 802.11n MCS0 (HT20): 29.25 dBm IEEE 802.11n MCS0 (HT40): 23.81 dBm Frequency band and operating channels Frequency Band Channel No. Frequency Channel No. Frequency 2400~2483.5MHz 1 2412 MHz 7 2442 MHz 2 2417 MHz 8 2447 MHz 3 2422 MHz 9 2452 MHz 4 2427 MHz 10 2457 MHz 5 2432 MHz 11 2462 MHz 6 2437 MHz - - Frequency Band Channel No. Frequency Channel No. 5150- to 5250-MHz Band 1 36 5180 MHz 44 38 5190 MHz 46 40 5200 MHz 48 42 5210 MHz - 52 5260 MHz 60 54 5270 MHz 62 5250- to 5350-MHz Band 2 56 5280 MHz 64 58 5290 MHz - 100 5500 MHz 112 102 5510 MHz 116 104 5520 MHz 132 5470- to 5725-MHz Band 3 106 5530 MHz 134 108 5540 MHz 136 110 5550 MHz 140 149 5745 MHz 157 151 5755 MHz 159 5725- to 5850-MHz Band 4 153 5765 MHz 161 155 5775 MHz 165 Transmitted output power Transmitted Output Power: 2.4 GHz ●  802.11b: 20.0 +/– 1.5 dBm @ CH6, all rates ●  802.11g: 20.0 +/– 1.5 dBm@ CH6, 6 Mbps ●  802.11g: 17.0 +/– 1.5 dBm@ CH6, 54 Mbps ●  802.11n(HT20): 20.0 +/– 1.5 dBm@ CH6, MCS0 ●  802.11n(HT20): 17.0 +/– 1.5 dBm@ CH6, MCS7 ●  802.11n(HT40): 16.0 +/– 1.5 dBm@ CH6, MCS7 5-GHz UNII-1 (5150~5250 MHz) ●  802.11a: 22.0 +/– 2 dBm @ 6 Mbps ●  802.11a: 20.0 +/– 2 dBm @ 54 Mbps ●  802.11ac(VHT20): 22.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT20): 14.0 +/– 2 dBm @ MCS8 ●  802.11ac(VHT40): 21.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT40): 14.0 +/– 2 dBm @ MCS9 ●  802.11ac(VHT80): 20.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT80): 14.0 +/– 2 dBm @ MCS9 5-GHz UNII-2 (5250–5350 MHz)/UNII-2 Extended (5470–5725 MHz) ●  802.11a: 22.0 +/– 2 dBm @ 6 Mbps ●  802.11a: 20.0 +/– 2 dBm @ 54 Mbps ●  802.11ac(VHT20): 22.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT20): 14.0 +/– 2 dBm @ MCS8 ●  802.11ac(VHT40): 21.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT40): 14.0 +/– 2 dBm @ MCS9 ●  802.11ac(VHT80): 20.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT80): 14.0 +/– 2 dBm @ MCS9 5GHz UNII-3 (5725~5850MHz) ●  802.11a: 22.0 +/– 2 dBm @ 6 Mbps ●  802.11a: 20.0 +/– 12 dBm @ 54 Mbps ●  802.11ac(VHT20): 22.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT20): 14.0 +/– 2 dBm @ MCS8 ●  802.11ac(VHT40): 21.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT40): 14.0 +/– 2 dBm @ MCS9 ●  802.11ac(VHT80): 20.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT80): 14.0 +/– 2 dBm @ MCS9 Wireless isolation Wireless isolation between clients External antennas None Internal antennas 4 Internal fixed PIFA antenna Antenna gain in dBi 3.61 dBi @2.4 GHz; 6.23 dBi @5 GHz Receiver sensitivity 2.4 GHz ●  802.11b: –86 dBm @ 11Mbps ●  802.11g: –73 dBm @ 54 Mbps ●  802.11n(HT20): –71 dBm @ MCS7 ●  802.11n(HT40): –67 dBm @ MCS7 5GHz ●  802.11a: –90 dBm @ 6 Mbps ●  802.11a: –74 dBm @ 54 Mbps ●  802.11ac(VHT20): –66 dBm @ MCS8 ●  802.11ac(VHT40): –62 dBm @ MCS9 ●  802.11ac(VHT80): –58 dBm @ MCS9 Wireless distribution system (WDS) Yes Fast roaming Yes Multiple SSIDs 16 per radio Wireless VLAN map Yes WLAN security Yes Wi-Fi Multimedia (WMM) Yes, with unscheduled automatic power save Operating Modes Access point Access point mode, Wireless Domain Services (WDS) bridging, and Workgroup Bridge mode Environmental Power options IEEE 802.3at/af Ethernet switch Cisco power injector: SB-PWR-INJ2-xx Cisco power adapter: SB-PWR-48v-xx Peak power: 18 watts Compliance Safety: ●  UL 60950-1 ●  CAN/CSA-C22.2 No. 60950-1 ●  IEC 60950-1 ●  EN 60950-1 Radio approvals: ●  FCC Part 15.247, 15.407 ●  RSS-210 (Canada) ●  EN 300.328, EN 301.893 (Europe) ●  AS/NZS 4268.2003 (Australia and New Zealand) EMI and susceptibility (Class B): ●  FCC Part 15.107 and 15.109 ●  ICES-003 (Canada) ●  EN 301.489-1 and -17 (Europe) Operating temperature 32 to 104°F) (0 to 40°C) Storage temperature –4 to 158°F (–20 to 70°C) Operating humidity 10 to 85% noncondensing Storage humidity 5 to 90% noncondensing System memory 256-MB RAM 128-MB flash

Description: Details iShopping.pk brings you the best price for Bosch Control Unit With DAFS & Recorder (CCSD-CURD) with express shipping all over Pakistan.   Features: • Plug-and-play functionality for quick and easy connection of up to 80 Discussion Devices • Intuitive web browser interface control for advanced configuration and control • Built‑in MP3 recorder with internal memory and USB recording • Built‑in Digital Acoustic Feedback Suppression (DAFS) for ensuring superior speech intelligibility • On-board support for automatic HD camera control   Specifications: Supply voltage Adaptor 100 to 240 VAC, 50/60 Hz Current Consumption voltage Adaptor 1.9 A (100 VAC) to 1 A 240 (VAC) DC voltage Control Unit 24 V, 6.0 A Maximum number of Discussion Devices for Control Unit (without Extension Unit) 40 Discussion Devices per trunk 80 Discussion Device in total 24 V, Max 5.2 A (short-circuited protected) Discussion Device loudspeakers volume control 15 steps of 1.5 dB (starting from -10.5 dB) Limit threshold level to unit 12 dB above nominal level Gain reduction due to number of open microphones (NOM) 1/SQRT (NOM) Sample rate 44.1 kHz Frequency response 30 Hz to 20 kHz Ethernet speed 1 Gb/s Nominal input (85 dB SPL) Max. input (110 dB SPL) XLR nominal microphone input -56 dBV XLR maximum microphone input -26 dBV RCA nominal input -24 dBV (+/- 6 dB) RCA maximum input +6 dBV S/N > 93 dBA Frequency response 30 Hz to 20 kHz THD RCA nominal output -24 dBV (+6/- 24 dB) RCA maximum output +6 dBV S/N > 93 dBA Frequency response 30 Hz to 20 kHz THD Recording/ Playback (bit rate) 64, 96, 128, 256 Kbit/sec Recording/ Playback (sample frequency) 44.1 kHz Nominal output 72 dB SPL Frequency response 200 Hz to 16 kHz (acoustical) Gain range Mute -10.5 to +12 dB SanDisk USB memory stick Formatted with FAT32 file system. Maximum size: 128 GB. Bite rate Internal memory size/hours, USB memory stick size/hours 225 MB 16 GB, 32 GB, 64 GB, 128 GB 64 8 hrs, 500 hrs, 1000 hrs, 2000 hrs, 4000 hrs 96 5 hrs, 350 hrs, 700 hrs, 1400 hrs, 2800 hrs 128 4 hrs, 250 hrs, 500 hrs, 1000 hrs, 2000 hrs 256 * 2 hrs, 125 hrs, 250 hrs, 500 hrs, 1000 hrs Dimensions including feet (H x W x D) 45 x 440 x 200 mm(1.8 x 17.3 x 7.9 in) 19” wide, 1 RU high Height of feet 5.5 mm (0.2 in) Mounting Tabletop or 19 “ rack Material (top and base) Painted metal Color (top and base) Traffic black (RAL 9017) matt-gloss Rim front panel Pearl light grey (RAL 9022) matt-gloss Weight (CCSD‑CURD) Approx. 3.4 kg (7.5 lb) Operating temperature 5 ºC to +45 ºC (+41 ºF to +113 ºF) Storage and transport temperature -40 ºC to +70 ºC (-40 ºF to +158 ºF) Relative humidity 5% to 98% non-condensing

Description: Details iShopping.pk brings you the best price for Amped Wireless Titan-Ex AC1900 Dual Band Wi-Fi Range Extender (RE1900A) with 1 year international warranty and express shipping all over Pakistan.   The  TITAN-EX  is the most powerful Range Extender available. Built with a 1GHz Dual Core Processor, 14 high power amplifiers, and 4 high gain antennas, the  TITAN-EX  delivers superior Wi-Fi performance and up to 14,000 sq ft of coverage. It is built to provide unmatched coverage, speed, and reliability for the busiest networks with many connected devices. Blazing-fast AC1900 Wi-Fi technology provides up to 1900Mbps of Wi-Fi speed, making slow downloads and video buffering a thing of the past. With 4 Antenna-Rx Technology, the  TITAN-EX  provides stable and strong connections for all of your devices. Extend your network with the  TITAN-EX  to go further, move faster and do more.   Specification: Wireless Standard: 802.11a/b/g/n/ac Frequency Band: 2.4/5GHz Simultaneous Wireless Speed: 2.4GHz: 600Mbps 5GHz: 1300Mbps Amplifiers: 3 x 2.4GHz Amplifiers 3 x 5GHz Amplifiers 8 x Low Noise Amplifiers Processor: 1GHz Dual-Core Processor Memory: 128MB DDR3 Wireless Coverage Control: 15% - 100% Output Power (Individually adjustable for 2.4GHz and 5GHz networks) Antennas: 4 x Detachable High Gain 5dBi Dual Band Antennas Ports: 5 x RJ-45 10/100/1000M LAN Ports (Local Ports) 1 x USB 3.0 Port for USB Storage 1 x USB 2.0 Port for USB Storage Power Adapter Rating: Switching Adapter (Input: 100-240v, Output: 12v, 2.5A) Mounting: Wall or Desktop Setup Requirements:    Wireless 802.11a/b/g/n or ac 2.4GHz or 5GHz Network Computer, tablet or smartphone with a web browser Features: Ultimate Range & Wi-Fi Coverage Add long range Wi-Fi to your entire home or office with the  TITAN-EX. High Power amplifiers, low noise amplifiers and high gain antennas provide the ultimate Wi-Fi experience with a signal that easily penetrates walls and eliminates Wi-Fi dead spots.   14 Powerful Amplifiers & 4 Antennas The  TITAN-EX  is packed with the latest high power technology. With a total of 14 advanced amplifiers (3 x 2.4GHz amplifiers, 3 x 5GHz amplifiers, 4 x 2.4GHz signal reception amplifiers, 4 x 5GHz signal reception amplifiers) and 4 high gain 5dBi antennas, it delivers up to 800mW of output power. Providing the ultimate Wi-Fi performance and coverage, it is a leader in its class.   Stable Connections with 4 Antenna-Rx Technology The  TITAN-EX  features a unique combination of 3 transmitters with 4 receivers and 4 antennas per frequency to blanket a home or office with multiple Wi-Fi streams for unparalleled reliability, performance, and range.   Unmatched AC1900 Wi-Fi for Flawless HD & 4K Streaming Move faster than ever with unprecedented Wi-Fi speeds of up to 1900Mbps, that's 600Mbps on the 2.4GHz frequency and 1300Mbps on the 5GHz. Seamlessly stream HD and 4K content to multiple devices at once and eliminate gaming lag.   More Bandwidth for More Devices The  TITAN-EX  combines AC1900 Wi-Fi speeds with Amped Wireless' High Power Technology to provide multiple room, blazing-fast Wi-Fi coverage. The increased bandwidth of AC1900 and 4 Antenna-Rx Technology means your entire family can stream whatever they want, whenever they want, with no lag, all at the same time.   BoostBand™ Technology Maximizes Speed It features exclusive technology that increases overall speed and performance by streamlining dual band network traffic through a single Wi-Fi frequency band between the Router and the Range Exte nder. Stream HD media without buffering, transfer large data files faster and play your games without lag.   Network Bridging with 5 Gigabit Wired Ports Connect wired PCs, servers, printers, or A/V device, such as smart TVs, Blu-ray™ players, or gaming consoles at gigabit speeds with the five built-in wired network ports.   High Power Dual-Core Internet Processor Do more now with a powerful 1GHz Dual-Core Processor that is built to handle heavy traffic with ease, for the best networking experience.   Universal Compatibility The Range Extender works with all brands of standard single band (2.4GHz) or dual band (2.4GHz and 5GHz) wireless routers and service provider gateways. The  TITAN-EX  simultaneously extends both 2.4 and 5GHz networks to deliver maximum wireless speed and bandwidth.   Create Guest Networks Add up to eight additional wireless networks for other rooms or offices. Each network can be customized with unique passwords and bandwidth restrictions for guests.   Simple Setup The Setup Wizard connects the Range Extender to your home or office Wi-Fi network in minutes. Simply connect your PC, Smartphone, or tablet to the Range Extender's Wi-Fi network, enter the setup URL, scan for your wireless network, select it and you're done!   Easy Optimal Placement: Signal Strength LED The Signal Strength LED gives you instant feedback on the connection between the Range Extender and your Home Network. Green, yellow and red lights atop the device convey whether the Extender is in the optimal, moderately optimal or poor installation location.      

Description: Details iShopping.pk brings you the best price for Yamaha 12 Input Powered Digital Stereo Mixer (EMX7)   with 1 year official warranty and express shipping all over Pakistan.   Specifications: Analog Input Characteristics Input Connectors Channels 1-4: 4x Combo XLR-1/4" / 6.35 mm Channels 5/6: 1x XLR, 2x 1/4" / 6.35 mm Channels 7/8: 1x XLR, 2x 1/4" / 6.35 mm Channels 9/10: 1x XLR, 2x RCA  Channels 11/12: 1x XLR, 2x RCA, 1x 1/8" / 3.5 mm stereo mini-jack Load Impedance Channels 1-4 (XLR Mic/Line): 3 kOhms actual, 50-600 Ohms nominal with mics Channels 1-4 (1/4" Mic/Line): 8 kOhms, 600 Ohms nominal with lines Channel 4 (1/4", Hi-Z Engaged): 1 MOhms actual, 10 kOhms lines nominal Channels 5-12 (XLR): 2 kOhms actual, 50 - 600 Ohms mics nominal Channels 5-12 (1/4", RCA, 1/8"): 10 kOhms actual, 600 Ohms lines nominal Input Level Sensitivity Channel 1-4 (XLR, Mic): -60 dBu (0.775 mV) Channel 1-4 (XLR, Line): -30 dBu (24.5 mV) Channel 1-4 (1/4", Mic): -50 dBu (2.45 mV) Channel 1-4 (1/4", Line): -20 dBu (77.5 mV) Channel 4 (Hi-Z Engaged, Mic): -50 dBu (2.45 mV) Channel 4 (Hi-Z Engaged, Line): -20 dBu (77.5 mV) Channels 5-12 (XLR): -60 dBu (0.775 mV) Channels 5-8 (1/4"): -20 dBu (77.5 mV) Channels 9-12 (RCA, 1/8"): -8 dBu (316 mV) Nominal Channel 1-4 (XLR, Mic): -43 dBu (5.48 mV) Channel 1-4 (XLR, Line): -13 dBu (173 mV) Channel 1-4 (1/4", Mic): -33 dBu (17.3 mV) Channel 1-4 (1/4", Line): -3 dBu (548 mV) Channel 4 (Hi-Z Engaged, Mic): -33 dBu (17.3 mV) Channel 4 (Hi-Z Engaged, Line): -3 dBu (548 mV) Channels 5-12 (XLR): -43 dBu (5.48 mV) Channels 5-12 (1/4", RCA, 1/8"): -3 dBu (548 mV) Maximum Before Clip Channel 1-4 (XLR, Mic): -15 dBu (138 mV) Channel 1-4 (XLR, Line): +15 dBu (4.36 V) Channel 1-4 (1/4", Mic): -5 dBu (436 mV) Channel 1-4 (1/4", Line): +25 dBu (13.8 V) Channel 4 (Hi-Z Engaged, Mic): -5 dBu (436 mV) Channel 4 (Hi-Z Engaged, Line): +20 dBu (7.75 V) Channels 5-12 (XLR): -15 dBu (138 mV) Channels 5-12 (1/4", RCA, 1/8"): +25 dBu (13.8 V) Analog Output Characteristic Output Connectors Stereo Out (L/R): 2x 1/4" / 6.35 mm balanced Aux Sends (1/2): 2x 1/4" / 6.35 mm balanced Rec Out (L/R): 2x RCA unbalanced Impedance Stereo Out (L/R): 600 Ohms actual, 10 kOhms Lines Aux Sends (1/2): 600 Ohms actual, 10 kOhms Lines Rec Out (L/R): 600 Ohms actual, 10 kOhms Lines Output Level Stereo Out (L/R): +4 dBu (1.228 V) nominal, +20 dBu (7.75 V) max before clipping Aux Sends (1/2): +4 dBu (1.228 V) nominal, +20 dBu (7.75 V) max before clipping Rec Out (L/R): -10 dBV (0.308 V) nominal, +18 dBV (7.75 V) max before clipping Loudspeaker Outputs Connectors Speakers A/B: 2x Neutrik speakON NL4, 1/4" / 6.35 mm Impedance Actual Source Impedance: For Use with Nominal: 4 Ohm speakers, 8 Ohm speakers Output Level 4 Ohm Speakers: 600 W (1 Hz THD+N 8 Ohm Speakers: 400 W (1 Hz THD+N General Specifications Output Power 1 kHz THD+N 1 kHz THD+N Frequency Response Frequency Response Refer to the nominal output level @ 1 kHz Input to Speakers: +1/-3 dB (40 Hz to 20 kHz) Input to Stereo Out, Aux 1/2 Send: +0.5/-1.0 dB (20 Hz to 20 kHz) THD + N Input to Speakers (Mic/Line): 0.1% @ 10 W (40 Hz to 20 kHz) Input to Speakers (Line - Channels 1-4) 0.04% @ 65 W (1 kHz) Input to Stereo Out, Aux 1/2 Send (Mic/Line): 0.02% @ +14 dBu (20 Hz to 20 kHz)  Input to Stereo Out, Aux 1/2 Send (Line - Channels 1-4): 0.007% @ +20 dBu (1 kHz) Hum & Noise EIN: -117 dBu Residual Output Noise Input to Speakers: -70 dBu (40 Hz to 20 kHz, Stereo Master Level: min) Input to Stereo Out, Aux 1/2 Sends: -82 dBu (20 Hz to 20 kHz, Stereo Master Level: min) Crosstalk (1 kHz): -85 dB Input Channels Mono (Mic/Line): 8 Stereo: (Line): 4 Total: 12 Output Channels Speakers: A/B Aux 1 Send Aux 2 Send Stereo Out: L/R Rec Out: L/R Bus Stereo: 1 Aux: 2 (including FX) Pad Channels 1-4: 30 dB Hi-Z Input Channel 4: Supported HPF High Pass Filter (Channels 1-3): 80 Hz, -12 dB/octave EQ Section High: 10 kHz +15/-15 dB Mid: 2.5 kHz +15/-15 dB Low: 100 Hz +15/-15 dB Compressor Single knob compressor Audio Level Meter 2x 12 Points LED Meter: (-30, -25, -20, -15, -10, -6, -3, 0, +3, +6, +10, Peak) Built-in Effects SPX Algorithm: 24 programs Output Channel Function Graphic EQ Speaker Processor  Feedback Suppressor Phantom Power +48 V Footswitch Input Effect mute on/off Protection Load Protection: DC-fault Amplifier Protection: Overheat protection, overcurrent protection, integral power protection Power Supply Protection: Overheat protection, overcurrent protection Power Power Requirements: 100-240 VAC, 50/60 Hz Power Consumption: 45 W (Idle) / 250 W (1/8 power) Operating Temperature 32 to 104°F / 0 to 40°C     The  Yamaha EMX7  is a 12-input powered mixer with an integrated 1420W amplifier, eight mic/line inputs, four stereo line inputs, and two Aux sends. The mixer features a Hi-Z guitar input on channel four and each channel offers a 3-band EQ for custom tailoring your sound. Channels 1-4 offer XLR-1/4" combo jacks. Channels 5 through 12 provide mono XLR inputs, with channels 5-8 offering 1/4" inputs and 9-12 offering an additional set of stereo RCA inputs. Channels 11/12 also include an 1/8" stereo mini-jack for connecting portable music players. The EMX7 includes a single knob compressor on channels 1-4, an integrated feedback suppressor, and a built-in multi-effects processor with SPX series algorithms. Additionally, the mixer offers an integrated speaker processor with bass boost, designed to bring out the best quality from Yamaha or 3rd party passive speakers. The EMX7 also includes a Flex9GEQ graphic equalizer for Aux 1, Aux 2, and Stereo Output. The Flex9GEQ allows you to select up to nine bands out of a total of 31 and adjust the gain. 

Description: Details iShopping.pk brings you the best price for Bosch Digital Discussion For Control Unit (CCSD-CU) with express shipping all over Pakistan.   The Bosch CCSD-CU is the basic control unit for the Bosch CCS-1000D digital conference system. This control unit powers the discussion microphones (up to 80 in total), controls cameras (CCTV software included) and interfaces with external equipment such as a public address system. The front panel provides the neccessary controls but the system can also be controlled via a laptop or tablet. This includes the ability to activate or deactivate participant microphones, or changing the status of paticipants from 'waiting' to 'speaking'. Up to 6 HD cameras can be connected and controlled via the integral software, in order to relay the image of the person speaking onto a large screen.   Features: • Plug-and-play functionality for quick and easy connection of up to 80 Discussion Devices • Intuitive web browser control for advanced configuration and control   Specifications: Mains voltage 100 to 240 VAC ± 10% Current consumption Maximum 0.6 A (100 VAC) to 0.2 A (240 VAC) DC supply to Discussion Devices 24 V ± 1 V (current limited) Number of Discussion Devices per Control Unit Max. 40 devices per trunk connector Discussion Device loudspeakers volume control 15 steps of 1.5 dB (starting from -10.5 dB) Limit threshold level to unit 12 dB above nominal level Gain reduction due to number of open microphones (NOM) 1/SQRT (NOM) Sample rate 44.1 kHz Nominal input (85 dB SPL) Max. input (110 dB SPL) XLR nominal microphone input -56 dBV XLR maximum microphone input -26 dBV RCA nominal input -24 dBV (+/- 6 dB) RCA maximum input +6 dBV S/N > 94 dBA Frequency response 30 Hz to 20 kHz RCA nominal output -24 dBV (+6/- 24 dB) RCA maximum output +6 dBV S/N > 102 dBA Frequency response 30 Hz to 20 kHz Recording/ Playback (bit rate) 64, 96, 128, 256 Kbit/sec Recording/ Playback (sample frequency) 44.1 kHz Nominal output 72 dB SPL Frequency response 200 Hz to 12.5 kHz Gain range mute -10.5 to +12 SanDisk USB memory stick Formatted with FAT32 file system.Maximum size: 128 GB. Bite rate Internal memory hours, USB memory stick hours 16 GB 32 GB, 64 GB, 128 GB 64 8 hrs, 500, 1000, 2000, 4000 96 5 hrs, 350, 700, 1400, 2800 128 4 hrs, 250, 500, 1000, 2000 256 * 2 hrs, 125, 250, 500, 1000 Dimensions including feet (H x W x D) 45 x 440 x 200 mm(1.8 x 17.3 x 7.9 in)19” wide, 1 RU high Height of feet 5.5 mm (0.2 in) Mounting Tabletop19-inch rack Weight (CCSD-CU) Approx. 3.2 kg (7.1 lb) Weight (CCSD-CURD) Approx. 3.4 kg (7.5 lb) Material (top) Painted metal Material (base) Painted metal Color (top) Traffic black (RAL 9017) matt-gloss Color (base) Traffic black (RAL 9017) matt-gloss Rim Pearl light grey (RAL 9022) matt-gloss Operating temperature 5 ºC to +45 ºC (+41 ºF to +113 ºF) Storage temperature -40 ºC to +70 ºC (-40 ºF to +158 ºF) Relative humidity 5% to 98% non-condensing

Description: Details iShopping.pk brings you the best price for Yamaha 12 Input Powered Digital Stereo Mixer (EMX5)   with 1 year official warranty and express shipping all over Pakistan.   Specifications: Input Connectors Channels 1-4: 4x Combo XLR-1/4" / 6.35 mm Channels 5/6: 1x XLR, 2x 1/4" / 6.35 mm Channels 7/8: 1x XLR, 2x 1/4" / 6.35 mm Channels 9/10: 1x XLR, 2x RCA  Channels 11/12: 1x XLR, 2x RCA, 1x 1/8" / 3.5 mm stereo mini-jack Load Impedance Channels 1-4 (XLR Mic/Line): 3 kOhms actual, 50-600 Ohms nominal with mics Channels 1-4 (1/4" Mic/Line): 8 kOhms, 600 Ohms line Channel 4 (1/4", Hi-Z Engaged): 1 MOhms actual, 10 kOhms lines nominal Channels 5-12 (XLR): 2 kOhms actual, 50 - 600 Ohms lines nominal Channels 5-12 (1/4", RCA, 1/8"): 10 kOhms actual, 600 Ohms nominal Input Level Sensitivity Channel 1-4 (XLR, Mic): -60 dBu (0.775 mV) Channel 1-4 (XLR, Line): -30 dBu (24.5 mV) Channel 1-4 (1/4", Mic): -50 dBu (2.45 mV) Channel 1-4 (1/4", Line): -20 dBu (77.5 mV) Channel 4 (Hi-Z Engaged, Mic): -50 dBu (2.45 mV) Channel 4 (Hi-Z Engaged, Line): -20 dBu (77.5 mV) Channels 5-12 (XLR): -60 dBu (0.775 mV) Channels 5-8 (1/4"): -20 dBu (77.5 mV) Channels 9-12 (RCA, 1/8"): -8 dBu (316 mV) Nominal Channel 1-4 (XLR, Mic): -43 dBu (5.48 mV) Channel 1-4 (XLR, Line): -13 dBu (173 mV) Channel 1-4 (1/4", Mic): -33 dBu (17.3 mV) Channel 1-4 (1/4", Line): -3 dBu (548 mV) Channel 4 (Hi-Z Engaged, Mic): -33 dBu (17.3 mV) Channel 4 (Hi-Z Engaged, Line): -3 dBu (548 mV) Channels 5-12 (XLR): -43 dBu (5.48 mV) Channels 5-12 (1/4", RCA, 1/8"): -3 dBu (548 mV) Maximum Before Clip Channel 1-4 (XLR, Mic): -15 dBu (138 mV) Channel 1-4 (XLR, Line): +15 dBu (4.36 V) Channel 1-4 (1/4", Mic): -5 dBu (436 mV) Channel 1-4 (1/4", Line): +25 dBu (13.8 V) Channel 4 (Hi-Z Engaged, Mic): -5 dBu (436 mV) Channel 4 (Hi-Z Engaged, Line): +20 dBu (7.75 V) Channels 5-12 (XLR): -15 dBu (138 mV) Channels 5-12 (1/4", RCA, 1/8"): +25 dBu (13.8 V) Analog Output Characteristic Output Connectors Stereo Out (L/R): 2x 1/4" / 6.35 mm balanced Aux Sends (1/2): 2x 1/4" / 6.35 mm balanced Rec Out (L/R): 2x RCA unbalanced Impedance Stereo Out (L/R): 600 Ohms actual, 10 kOhms Lines Aux Sends (1/2): 600 Ohms actual, 10 kOhms Lines Rec Out (L/R): 600 Ohms actual, 10 kOhms Lines Output Level Stereo Out (L/R): +4 dBu (1.228 V) nominal, +20 dBu (7.75 V) max before clipping Aux Sends (1/2): +4 dBu (1.228 V) nominal, +20 dBu (7.75 V) max before clipping Rec Out (L/R): -10 dBV (0.308 V) nominal, +18 dBV (7.75 V) max before clipping Loudspeaker Outputs Connectors Speakers A/B: Neutrik speakON NL4, 1/4" / 6.35 mm phone jack Impedance Actual Source Impedance: For Use with Nominal: 4 Ohm speakers, 8 Ohm speakers Output Level 4 Ohm Speakers: 500 W (1 Hz THD+N 8 Ohm Speakers: 370 W (1 Hz THD+N General Specifications Output Power 1 kHz THD+N 1 kHz THD+N Frequency Response Frequency Response Refer to the nominal output level @ 1 kHz Input to Speakers: +1/-3 dB (40 Hz to 20 kHz) Input to Stereo Out, Aux 1/2 Send: +0.5/-1.0 dB (20 Hz to 20 kHz) THD + N Input to Speakers: 0.1% @ 10 W (40 Hz to 20 kHz), 0.05% @ 50 W (1 kHz) Input to Stereo Out, Aux 1/2 Send: 0.03% @ +14 dBu (20 Hz to 20 kHz), 0.007% @ +20 dBu (1 kHz) Crosstalk (1 kHz): -85 dB Input Channels Mono (Mic/Line): 8 Stereo: (Line): 4 Total: 12 Output Channels Speakers: A/B Aux 1 Send Aux 2 Send Stereo Out: L/R Rec Out: L/R Bus Stereo: 1 Aux: 2 (including FX) Pad Channels 1-4: 30 dB Hi-Z Input Channel 4: Supported HPF High Pass Filter (Channels 1-3): 80 Hz, -12 dB/octave EQ Section High: 10 kHz +15/-15 dB Mid: 2.5 kHz +15/-15 dB Low: 100 Hz +15/-15 dB Compressor Single knob compressor Audio Level Meter 7 points (-20, -10, -6, 0, +6, +10, Peak) Built-in Effects SPX Algorithm: 24 programs Output Channel Function Master EQ (Speech to Music) Monitor EQ  Feedback Suppressor Phantom Power +48 V Footswitch Input Effect mute on/off Protection Load Protection: DC-fault Amplifier Protection: Overheat protection, overcurrent protection, integral power protection Power Supply Protection: Overheat protection, overcurrent protection Power Power Requirements: 100-240 VAC, 50/60 Hz Power Consumption: 42 W (Idle) / 210 W (1/8 power) Operating Temperature 32 to 104°F / 0 to 40°C   The  Yamaha EMX 5  is a 12-input powered mixer with an integrated 1260W amplifier, eight mic/line inputs, four stereo line inputs, and two Aux sends. The mixer features a Hi-Z guitar input on channel four and each channel offers a 3-band EQ for custom tailoring your sound. Channels 1-4 offer XLR-1/4" combo jacks. Channels 5 through 12 provide mono XLR inputs, with channels 5-8 offering 1/4" inputs and 9-12 offering an additional set of stereo RCA inputs. Channels 11/12 also include an 1/8" stereo mini-jack for connecting portable music players. The EMX 5 includes a single knob compressor on channels 1-4, an integrated feedback suppressor, and a built-in multi-effects processor with SPX series algorithms. Additionally, the mixer offers a Master EQ, which provides a single knob to control the level of low end. At the far left, the speech setting cuts low frequencies, while the middle position is neutral for music playback. The far right setting provides a Bass Boost to enhance music playback.

Description: Details iShopping.pk brings you the best price for Sennheiser Lavailer Clip-On Wireless Microphone Set (XSW 12-C) with express shipping all over Pakistan.   Make your presentations come to life! Compact bodypack system, with omnidirectional lavalier mic, offering excellent speech intelligibility. Transmitter features an illuminated mute button, 10 hours of operation, and 960 tunable frequencies. Unobtrusive ME2-2 lapel mic provides natural speech reproduction. All-metal, True Diversity receiver offers intuitive scan and sync functions that ensure trouble-free operation. Rugged, reliable and easy-to-use, XS Wireless delivers renowned Sennheiser sound to small venues, conference rooms or houses of worship.   Features: • Easy-to-use, all-in-one package for singers, speakers and presenters •  e 835 sound to cut through high on-stage levels •  High feedback rejection •  Mute button for full speech control •  Synchronization via RF remote channel •  Frequencies tunable in steps of 25 kHz •  24 MHz bandwidth •  8 frequency banks with each max 12 presets   Specification: Technical Data RF frequency range 821...832 MHz / 863...865 MHz  766...790 MHz  614...638 MHz  606...630 MHz  548...572 MHz  548...865 MHz Presets 12 THD, total harmonic distortion Signal-to-noise ratio > 103 dB(A) Transmission/receiving frequencies 960 (520 in range E) Switching bandwidth 24 MHz (13 MHz in range E) Receivers Dimensions 200 x 127 x 42 mm Weight ~ 730 g Antenna connector 2 BNC, 50 Ω Audio output level (balanced) XLR: +14 dBu max Audio output level (unbalanced) Jack: +8 dBu max Diversity reception True Diversity Transmitter Dimensions 96 x 66 x 24 mm Frequency response Mic: 100...16000 Hz  Line: 60...16000 Hz Weight ~ 95g RF Output Power typ. 10 mW Operating Time 10h Power Suppy 2x AA Batteries Input Voltage Range 0.5 Vrms Clip-on Microphone Microphone permanent polarized Sound pressure level (SPL) 142 dB Weight ~ 240 g Transducer Principle permanently polarized condenser microphone Pick-up pattern Omni directional AF sensitivity 5 mV/Pa

Description: Details iShopping.pk brings you the best price for Amped Wireless Titan-Ap High Power Dual Band AC1900 Wireless Access Point (APA1900) with 1 year international warranty and express shipping all over Pakistan.   The  TITAN-AP  adds long range Wi-Fi access to any existing network. Built with a 1GHz Dual-Core Processor, 14 high power amplifiers, and 4 high gain antennas, the  TITAN-AP  delivers superior Wi-Fi performance with ultimate coverage. It provides unmatched coverage, speed, and reliability for the busiest networks. Blazing-fast AC1900 Wi-Fi technology delivers up to 1900Mbps of Wi-Fi speed, making slow downloads and video buffering a thing of the past. With advanced 4 Antenna-Rx Technology, the  TITAN-AP  provides stable and strong connections for all of your devices. Plug and Play set up makes it easy to install. Upgrade your network with the  TITAN-AP  to go further, move faster and do more.   Specifications: Wireless Standard: 802.11a/b/g/n/ac Frequency Band: 2.4/5GHz Simultaneous Wireless Speed: 2.4GHz: 600Mbps 5GHz: 1300Mbps Amplifiers: 3 x 2.4GHz Amplifiers 3 x 5GHz Amplifiers 8 x Low Noise Amplifiers Processor: 1GHz Dual-Core Processor Memory: 128MB DDR3 Wireless Coverage Control: 15% - 100% Output Power (Individually adjustable for 2.4GHz and 5GHz networks) Antennas: 4 x Detachable High Gain 5dBi Dual Band Antennas Ports: 1 x RJ-45 10/100/1000M WAN Port (Network Port) 4 x RJ-45 10/100/1000M LAN Ports (Local Ports) 1 x USB 3.0 Port for USB Storage 1 x USB 2.0 Port for USB Storage Power Adapter Rating: Switching Adapter, Input: 100-240v, Output: 12v, 2.5A Mounting: Wall or Desktop Setup Requirements: A router or network switch with an available network (LAN) port Computer with wired (RJ-45) or wireless (802.11a/b/g/n or ac) adapter   Features: Ultimate Range & Wi-Fi Coverage Add long range Wi-Fi to your entire home or office with the  TITAN-AP. High Power amplifiers, low noise amplifiers and high gain antennas provide the ultimate Wi-Fi experience with a signal that easily penetrates walls and eliminates Wi-Fi dead spots.   14 Powerful Amplifiers & 4 Antennas The  TITAN-AP  is packed with the latest high power technology. With a total of 14 advanced amplifiers (3 x 2.4GHz amplifiers, 3 x 5GHz amplifiers, 4 x 2.4GHz signal reception amplifiers, 4 x 5GHz signal reception amplifiers) and 4 high gain 5dBi antennas, it delivers up to 800mW of output power. Providing the ultimate Wi-Fi performance and coverage, it is a leader in its class.   Stable Connections with 4 Antenna-Rx Technology The  TITAN-AP  features a unique combination of 3 transmitters with 4 receivers and 4 antennas per frequency to blanket a home or office with multiple Wi-Fi streams for unparalleled reliability, performance, and range.   Unmatched AC1900 Wi-Fi for Flawless HD & 4K Streaming Move faster than ever with unprecedented Wi-Fi speeds of up to 1900Mbps, that's 600Mbps on the 2.4GHz frequency and 1300Mbps on the 5GHz. Seamlessly stream HD and 4K content to multiple devices at once and eliminate gaming lag.   More Bandwidth for More Devices The  TITAN-AP  combines AC1900 Wi-Fi speeds with Amped Wireless' High Power Technology to provide multiple room, blazing-fast Wi-Fi coverage. The increased bandwidth of AC1900 and 4 Antenna-Rx Technology means your entire family can stream whatever they want, whenever they want, with no lag, all at the same time.   Parental Security Features & Guest Networks You're in control! Smart security features allow you to set the exact days and times that the networks are available, control the strength of your signal, and even block specific devices from accessing the network at all. Create up to 8 additional Wi-Fi networks for guests or conference rooms and enjoy secure connections with WPS push button configuration.   4 Gigabit Wired Ports Connect wired PCs, servers, printers, or A/V device, such as smart TVs, Blu-ray™ players, or gaming consoles at gigabit speeds with the four built-in wired network ports.   High Power Dual-Core Internet Processor Do more now with a powerful 1GHz Dual-Core Processor that is built to handle heavy traffic with ease, for the best networking experience.   Share Files Faster with USB 3.0 Includes two USB ports, one USB 3.0 and one USB 2.0. These ports are designed for attaching USB storage devices, such as an external hard drive or flash drive, to share at home or in the office with other networked computers.   Universal Compatibility The Access Point works with all brands and standards of single (2.4GHz) or dual band (2.4GHz/5GHz) wireless routers, powerlines or network switches.   Simple Plug & Play Setup Configuring the Access Point is easy. You simply plug the TITAN-AP into your router or network switch and the Access Point will automatically configure itself to your network. That's all it takes to get your High Power Wi-Fi Network up and running.  

Description: Details iShopping.pk brings you the best price for Amped Wireless Athena-Ap AC2600 Dual Band MU-MIMO Wi-Fi Access Point (APA2600M) with 1 year international warranty and express shipping all over Pakistan.   The  ATHENA-AP  is the ultimate Wi-Fi Access Point for the multi-device household/office. It adds reliable, long range, ultra-fast Wi-Fi coverage to any existing Wi-Fi network including networks with an existing router provided by the Internet service provider. Built with a powerful 1.3GHz Quad-Core Processor, 16 high power amplifiers, and 4 high gain antennas, the  ATHENA-AP delivers unrivaled Wi-Fi performance. It is designed to provide unmatched range, speed, and reliability for the most demanding networks with many connected devices. Incredibly fast AC2600 Wi-Fi technology provides up to 2.53Gbps, making lag and buffering a thing of the past for everyone. The  ATHENA-AP  also features cutting edge MU-MIMO technology that enables multiple devices to receive data at once, granting uninterrupted streaming for all. Get rid of your Wi-Fi dead zones, stream movies and shows with ease, and be free with your mobile devices. The ultimate home or office Wi-Fi experience is here, with the  ATHENA-AP.   Specifications: Wireless Standard: 802.11a/b/g/n/ac Frequency Band: 2.4/5GHz Simultaneous Wireless Speed: 2.4GHz: 800Mbps (Rx), 800Mbps (Tx) 5GHz: 1733Mbps (Rx), 1733Mbps (Tx) Amplifiers: 4 x 2.4GHz Amplifiers 4 x 5GHz Amplifiers 8 x Low Noise Amplifiers Processor: 1.3GHz Quad-Core Processor Memory: 128MB Flash, 256MB DDR3 Wireless Coverage Control: 15% - 100% Output Power (Individually adjustable for 2.4GHz and 5GHz networks) Antennas: 4 x Detachable High Gain 5dBi Dual Band Antennas Ports: 1 x RJ-45 10/100/1000M (Network) 4 x RJ-45 10/100/1000M (LAN) 1 x USB 2.0 Port for USB Storage 1 x USB 3.0 Port for USB Storage Power Adapter Rating: Switching Adapter (Input: 100-240v, Output: 12v, 3A) Mounting: Wall or Desktop Setup Requirements: A router or network switch with an available network (LAN) port Computer with wired or wireless network adapter     Features: Ultimate Range & Wi-Fi Coverage Add long range Wi-Fi to your entire home or office with the  ATHENA-AP. High Power amplifiers, low noise amplifiers and high gain antennas provide the ultimate Wi-Fi experience with a signal that easily penetrates walls and eliminates Wi-Fi dead spots.   16 Powerful Amplifiers & 4 Antennas The  ATHENA-AP  is packed with the latest high power technology. With a total of 16 advanced amplifiers (4 x 2.4GHz amplifiers, 4 x 5GHz amplifiers, 4 x 2.4GHz signal reception amplifiers, 4 x 5GHz signal reception amplifiers) and 4 high gain 5dBi antennas, it delivers up to 800mW of output power. Providing the ultimate Wi-Fi performance and coverage, it is the leader in its class. 1 Multi-User MIMO means More Streaming for Everyone Standard range extenders send data to one device at a time. The  ATHENA-AP  with MU-MIMO technology delivers up to 3X the speed by serving data to multiple devices at once for uninterrupted and blazing-fast movie streaming, gaming and downloading for everyone at the same time.   Stable Connections with 4 Antenna Technology The  ATHENA-AP  features a unique combination of 4 transmitters with 4 receivers and 4 antennas per frequency to blanket a home or office with multiple Wi-Fi streams for unparalleled reliability, performance, and range.   Unmatched AC2600 Wi-Fi for Flawless HD & 4K Streaming Move faster than ever with unprecedented Wi-Fi speeds of up to 2.53Gbps, that's 800Mbps on the 2.4GHz frequency and 1733Mbps on the 5GHz. Seamlessly stream HD and 4K content to multiple devices at once and eliminate gaming lag.   More Bandwidth for More Devices The  ATHENA-AP  combines AC2600 Wi-Fi speeds with Amped Wireless' High Power Technology to provide multiple room, incredibly fast Wi-Fi coverage. The increased bandwidth of AC2600 and 4 Antenna Technology means your entire family can stream whatever they want, whenever they want, with no lag, all at the same time.   Network Bridging with 4 Gigabit Wired Ports Connect wired PCs, servers, printers, or A/V device, such as smart TVs, Blu-ray™ players, or gaming consoles at gigabit speeds with the four built-in wired network ports.   High Power Quad-Core Internet Processor Do more now with a powerful 1.3GHz Quad-Core Processor that is built to handle heavy traffic with ease, for the best networking experience.   Universal Compatibility The Access Point works with all brands and standards of single (2.4GHz) or dual band (2.4GHz/5GHz) wireless routers, powerlines or network switches.   Create Guest Networks Add up to eight additional wireless networks for other rooms or offices. Each network can be customized with unique passwords and bandwidth restrictions for guests.   Simple Plug & Play Setup Configuring the Access Point is easy. You simply plug the  ATHENA-AP  into your router or network switch and the Access Point will automatically configure itself to your network. That's all it takes to get your High Power Wi-Fi Network up and running.  

Description: Details iShopping.pk brings you the best price for TP-Link 2.4GHz 300Mbps 9dBi Outdoor CPE (CPE210) with express shipping all over Pakistan.   Features: • Built-in 9dBi 2x2 dual-polarized directional MIMO antenna •  Adjustable transmission power from 0 to 27dBm/500mw •  System-level optimizations for more than 5km long range wireless transmission •  TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications •  Centralized Management System – Pharos Control •  AP / Client / Bridge / Repeater / AP Router / AP Client Router (WISP) operation modes •  Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely • Outdoor stabilized enclosure with IPX5 waterproof certification • Dual Ethernet ports and grounding terminal integrated • 6KV Lightning Protection, 15KV ESD Protection • Provides WEP, WPA/WPA2, WPA-PSK/WPA2-PSK data security • Selectable bandwidth of 5/10/20/40MHz • Provides Throughput Monitor, Spectrum Analyzer, Speed Test and Ping tools • Easy antenna alignment with wireless signal quality indicators via Web interface   Specification: HARDWARE Processor Qualcomm Atheros 560MHz CPU, MIPS 74Kc Memory 64MB DDR2 RAM, 8MB Flash Interface 1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in) 1 10/100Mbps Shielded Ethernet Port (LAN1, Passive PoE Passthrough) 1 Grounding Terminal 1 Reset Button Power Supply Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins) Voltage range: 16-27VDC Power Consumption 10.5 Watts Max Note: When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable. Dimensions (W x D x H) 224 x 79 x 60 mm Antenna Type Built-in 9dBi 2x2 Dual-polarized Directional Antenna Beam Width: 65° (H-Plane) / 35° (E-Plane) Note: For more details, please refer to datasheet Protection 15KV ESD Protection 6KV Lightning Protection Enclosure Outdoor ASA stabilized plastic material IPX5 waterproof Certification WIRELESS  Wireless Standards IEEE 802.11b/g/n (with Pharos MAXtream disabled) Proprietary Protocol TDMA Mode (with Pharos MAXtream enabled) Wireless Speeds Up to 300Mbps (40MHz,Dynamic) Up to 144.4Mbps (20MHz,Dynamic) Up to 72.2Mbps (10MHz,Dynamic) Up to 36.1Mbps (5MHz,Dynamic) Frequency 2.4~2.483GHz Note: Available operating frequency may vary depending on the limitations of the countries or regions in which the device is used. Transmission Power 27dBm/500mw (Adjustable power by 1dBm) Note: Maximum transmission power may vary across different channels depending on the limitations of the countries or regions in which the device is used. SOFTWARE Wireless Configurations Pharos MAXtream TDMA Technology 802.11b/g/n Modes Selectable Channel Width: 5/10/20/40MHz Automatic Channel Selection Transmission Power Control Dynamic Frequency Selection (DFS) WDS Enable/Disable Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption SSID Broadcast Enable/Disable Multi-SSID with VLAN Tagging (AP mode only) Distance/ACK Timeout Setting Wireless MAC Address Filter Wireless Advanced: > Beacon Interval/RTS Threshold/Fragmentation >Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia Management Discovery and Remote Management via Pharos Control application HTTP/HTTPS Web-based management System Log SNMP Agent(v2c) Ping Watch Dog Dynamic DDNS SSH Server System Tools Wireless Signal Quality Indicators: Signal Strength/Noise/Transmit CCQ/CPU/Memory Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP Spectrum Analyzer Speed Test Ping Traceroute System-level Optimizations Optimized IGMP Snooping/Proxy for multicast applications Hardware watch dog POE ADAPTER Dimensions(W x D x H) 110*57*33.5mm Input Current 0.8A Max @ 100VAC Input Voltage 100VA~240VAC @ 50Hz~60Hz Output 24VDC, 1.0A Max +4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet) Efficiency >80% Output Voltage 24VDC(+4,5pins; -7,8pins) Input 100-240VAC, 50/60Hz Power Status LEDs 0~0.8A: Green 0.8A~1.0A: Red Certifications CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark Interfaces 1 AC Jack with Earth Ground 1 10/100/1000Mbps Shielded Ethernet Port (Power + Data) 1 10/100/1000Mbps Shielded Ethernet Port (Data) Button Remote Reset Button OTHERS Certification CE, FCC, RoHS, IPX5 System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux. Note: We recommend you to use one of following Web browsers for an improved user experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended. Environment Operating Temperature: -30°C~70°C (-22℉~158℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~95% non-condensing   TP-LINK’s 2.4GHz 300Mbps 9dBi Outdoor CPE, the CPE210 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications.  Professional performance, coupled with user-friendly design, makes CPE210 an ideal choice for both business and home users.     Enterprise Hardware With Qualcomm Atheros enterprise level chipsets, high gain antennas and high quality material, specially designed enclosure, and PoE power supply, CPE210 is specially designed for outdoor use and can operate flawlessly in almost any climate, with operating temperatures ranging from -40℃ (-40℉) to +70 ℃ (158℉).   Advanced Antenna System Built-in High Gain Dual-Polarized Antenna  Dedicated metal reflector ensures higher gain  and lower noise interference   5km+ Wireless Data Transmission Specially designed for outdoor uses, ideal for long distance wireless data transmis sion over 5km+, tested in the field.     TP-LINK MAXtream TDMA Technology As network scale increases, wireless competition and collisions among CPEs and base stations will be so enormous that the real throughput of the network will drop, resulting in a serious impact on end-user experience. To mitigate these effects, the CPE210 uses MAXtream TDMA Technology.   Pharos Control – Centralized Management System CPE210 also comes equipped with centralized management software that helps users easily manage all the devices in their network from a single PC - Pharos Control. Functions like device discovery, status monitoring, firmware upgrading, and network maintenance can be managed using Pharos Control.   PharOS User-friendly web-based management system allows professionals to do more specific configurations.

Description: Details iShopping.pk brings you the best price for TP-Link 2.4GHz 300Mbps 12dBi Outdoor CPE (CPE220) with express shipping all over Pakistan.   Features: • Built-in 12dBi 2x2 dual-polarized directional MIMO antenna •  Adjustable transmission power from 0 to 30dBm/1000mw •  System-level optimizations for more than 13km long range wireless transmission •  TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications •  Centralized Management System – Pharos Control •  AP / Client / Bridge / Repeater / AP Router / AP Client Router (WISP) operation modes •  Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely   Specification: HARDWARE Processor Qualcomm Atheros 560MHz CPU, MIPS 74Kc Memory 64MB DDR2 RAM, 8MB Flash Interface 1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in) 1 10/100Mbps Shielded Ethernet Port (LAN1, Passive PoE Passthrough) 1 Grounding Terminal 1 Reset Button Power Supply Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins) Voltage range: 16-27VDC Power Consumption 10.8 Watts Max Note: When deployed using Passive PoE, the power drawn from the power source will  be higher by some amount depending on the length of the connecting cable. Dimensions (W x D x H) 11×3.1×2.1 inch (276×79×60 mm) Antenna Type Built-in 12dBi 2x2 Dual-polarized Directional Antenna Beam Width: 60° (H-Plane) / 30° (E-Plane) Note: For more details, please refer to datasheet Protection 15KV ESD Protection 6KV Lightning Protection Enclosure Outdoor ASA stabilized plastic material IPX5 waterproof Certification WIRELESS Wireless Standards IEEE 802.11b/g/n (with Pharos MAXtream disabled) Proprietary Protocol TDMA Mode (with Pharos MAXtream enabled) Wireless Speeds Up to 300Mbps (40MHz,Dynamic) Up to 144.4Mbps (20MHz,Dynamic) Up to 72.2Mbps (10MHz,Dynamic) Up to 36.1Mbps (5MHz,Dynamic) Frequency 2.4~2.483GHz Note: Available operating frequency may vary depending on the limitations  of the countries or regions in which the device is used. Transmission Power 30dBm/1000mw (Adjustable power by 1dBm) Note: Maximum transmission power may vary across different channels depending  on the limitations of the countries or regions in which the device is used. SOFTWARE Wireless Configurations Pharos MAXtream TDMA Technology 802.11b/g/n Modes Selectable Channel Width: 5/10/20/40MHz Automatic Channel Selection Transmission Power Control Dynamic Frequency Selection (DFS) WDS Enable/Disable Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption SSID Broadcast Enable/Disable Multi-SSID with VLAN Tagging (AP mode only) Distance/ACK Timeout Setting Wireless MAC Address Filter Wireless Advanced: > Beacon Interval/RTS Threshold/Fragmentation >Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia Management Discovery and Remote Management via Pharos Control application HTTP/HTTPS Web-based management System Log SNMP Agent(v2c) Ping Watch Dog Dynamic DDNS SSH Server System Tools                                     Wireless Signal Quality Indicators: Signal Strength/Noise/Transmit CCQ/CPU/Memory Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP Spectrum Analyzer Speed Test Ping Traceroute System-level Optimizations Optimized IGMP Snooping/Proxy for multicast applications Hardware watch dog POE ADAPTER Dimensions(W x D x H) 110×57×33.5mm Input Current 0.8A Max @ 100VAC Input Voltage 100VA~240VAC @ 50Hz~60Hz Output 24VDC, 1.0A Max +4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet) Efficiency >80% Output Voltage 24VDC(+4,5pins; -7,8pins) Input 100-240VAC, 50/60Hz Power Status LEDs 0~0.8A: Green 0.8A~1.0A: Red Certifications CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark Interfaces 1 AC Jack with Earth Ground 1 10/100Mbps/1000Mbps Shielded Ethernet Port (Power + Data) 1 10/100Mbps/1000Mbps Shielded Ethernet Port (Data) Button Remote Reset Button OTHERS Certification CE, FCC, RoHS, IPX5 System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7,  MAC OS, NetWare, UNIX or Linux. Note: We recommend you to use one of following Web browsers for an improved user  experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended. Environment Operating Temperature: -40°C~70°C (-40℉~158℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~95% non-condensing   TP-LINK’s 2.4GHz 300Mbps 12dBi Outdoor CPE, the CPE220 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications.  Professional performance, coupled with user-friendly design, makes CPE220 an ideal choice for both business and home users. Enterprise Hardware With Qualcomm Atheros enterprise level chipsets, high gain ante nnas and high quality material, specially designed enclosure, and P oE power supply, CPE220 is specially designed for outdoor use and can operate flawlessly in almost any climate, with operating temperatures ranging from -40℃ (-40℉) to +70 ℃ (158℉).     Advanced Antenna System Built-in High Gain Dual-Polarized Antenna  Dedicated metal reflector ensures higher gain  and lower noise interference   13km+ Wireless Data Transmission Specially designed for outdoor uses, ideal for long distance wireless data transmission over 13km+, tested in the field.     TP-LINK MAXtream TDMA Technology As network scale increases, wireless competition and collisions among CPEs and base stations will be so enormous that the real throughput of the network will drop, resulting in a serious impact on end-user experience. To mitigate these effects, the CPE220 uses MAXtream TDMA Technology.   Pharos Control – Centralized Management System CPE220 also comes equipped with centralized management software that helps users easily manage all the devices in their network from a single PC - Pharos Control. Functions like device discovery, status monitoring, firmware upgrading, and network maintenance can be managed using Pharos Control.   PharOS User-friendly web-based management system allows professionals to do more specific configurations.

Description: Details iShopping.pk brings you the best price for TP-Link 5GHz 300Mbps 13dBi Outdoor Access Point (CPE510) with express shipping all over Pakistan.   PharOS User-friendly web-based management system allows professionals to do more specific configurations.   5GHz 300Mbps 13dBi Outdoor CPE  CPE510 • Built-in 13dBi Dual-polarized • Directional Antenna • AP / Client / Repeater / AP Router / AP Client Router (WISP) operation modes • 6KV Lightning Protection • Weather Proof Enclosure • 15KV ESD Protection • Passive PoE Adapter   Specification: HARDWARE FEATURES Processor Qualcomm Atheros Enterprise 560MHz CPU, MIPS 74Kc Memory 64MB DDR2 RAM, 8MB Flash Interface 1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in) 1 10/100Mbps Shielded Ethernet Port (LAN1, Passive PoE Passthrough) 1 Grounding Terminal 1 Reset Button Power Supply Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins) Voltage range: 16-27VDC Power Consumption 10.5 Watts Max Note: When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable. Dimensions (W x D x H) 224 x 79 x 60 mm Antenna Type Built-in 13dBi 2x2 Dual-polarized Directional Antenna Beam Width: 45° (H-Plane) / 30° (E-Plane) Protection 15KV ESD Protection 6KV Lightning Protection Enclosure Outdoor ASA stabilized plastic material IPX5 waterproof Certification WIRELESS FEATURES Wireless Standards IEEE 802.11a/n (with Pharos MAXtream disabled) Proprietary Protocol TDMA Mode (with Pharos MAXtream enabled) Wireless Speeds Up to 300Mbps (40MHz,Dynamic) Up to 144.4Mbps (20MHz,Dynamic) Up to 72.2Mbps (10MHz,Dynamic) Up to 36.1Mbps (5MHz,Dynamic) Frequency 5.15~5.85GHz Note: Available operating frequency may vary depending on the limitations of the countries or regions in which the device is used. Transmission Power 23dBm/200mw (Adjustable power by 1dBm) Note: Maximum transmission power may vary across different channels depending on the limitations of the countries or regions in which the device is used. SOFTWARE FEATURES Wireless Configurations Pharos MAXtream TDMA Technology 802.11a/n Modes Selectable Channel Width: 5/10/20/40MHz Automatic Channel Selection Transmission Power Control Dynamic Frequency Selection (DFS) WDS Enable/Disable Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption SSID Broadcast Enable/Disable Multi-SSID with VLAN Tagging (AP mode only) Distance/ACK Timeout Setting Wireless MAC Address Filter Wireless Advanced: > Beacon Interval/RTS Threshold/Fragmentation >Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia Management Discovery and Remote Management via Pharos Control application HTTP/HTTPS Web-based management System Log SNMP Agent(v2c) Ping Watch Dog Dynamic DDNS SSH Server System Tools Wireless Signal Quality Indicators: Signal Strength/Noise/Transmit CCQ/CPU/Memory Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP Spectrum Analyzer Speed Test Ping Traceroute System-level Optimizations Optimized IGMP Snooping/Proxy for multicast applications Hardware watch dog POE ADAPTER FEATURES Dimensions(W x D x H) 110*57*33.5mm Input Current 0.8A Max @ 100VAC Input Voltage 100VA~240VAC @ 50Hz~60Hz Output 24VDC, 1.0A Max +4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet) Efficiency >80% Output Voltage 24VDC(+4,5pins; -7,8pins) Input 100-240VAC, 50/60Hz Power Status LEDs 0~0.8A: Green 0.8A~1.0A: Red Certifications CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark Interfaces 1 AC Jack with Earth Ground 1 10/100/1000Mbps Shielded Ethernet Port (Power + Data) 1 10/100/1000Mbps Shielded Ethernet Port (Data) Button Remote Reset Button OTHERS Certification CE, FCC, RoHS, IPX5 System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux. Note: We recommend you to use one of following Web browsers for an improved user experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended. Environment Operating Temperature: -30°C~70°C (-22℉~158℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~95% non-condensing   Features: • Built-in 13dBi 2x2 dual-polarized directional MIMO antenna • Adjustable transmission power from 0 to 23dBm/200mw • System-level optimization for more than 15km long range wireless transmission • TP-LINK Pharos MAXtream TDMA(Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency, ideal for PTMP applications • Centralized Management System – Pharos Control • AP / Client / Bridge / Repeater / AP Router / AP Client Router (WISP) operation modes • Outdoor stabilized enclosure with IPX5 waterproof certification • Dual Ethernet ports and grounding terminal integrated • 6KV Lightning Protection, 15KV ESD Protection • Passive PoE Adapter supports up to 60 meters (200 feet) power over Ethernet deployment and allows for device reset remotely • Provides WEP, WPA/WPA2, WPA-PSK/WPA2-PSK data security • Selectable bandwidth of 5/10/20/40MHz • Provides Throughput Monitor, Spectrum Analyzer, Speed Test and Ping tools • Easy antenna alignment with wireless signal quality indicators via Web interface   TP-LINK’s 5GHz 300Mbps 13dBi Outdoor CPE, the CPE510 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications.  Professional performance, coupled with user-friendly design, makes CPE510 an ideal choice for both business and home users.   Enterprise Hardware With Qualcomm Atheros enterprise level chipsets, high gain antennas and high quality material, specially designed enclosure, and PoE power supply, CPE510 is specially designed for outdoor use and can operate flawlessly in almost any climate, with operating temperatures ranging from -30℃ (-22℉) to +70 ℃ (158℉).   Advanced Antenna System Built-in High Gain Dual-Polarized Antenna Dedicated metal reflector ensures higher gain and lower noise interference   15km+ Wireless Data Transmission Specially designed for outdoor uses, ideal for long distance wireless data transmission, covering a range of 15km+, tested in the field.   TP-LINK MAXtream TDMA Technology As network scale increases, wireless competition and collisions among CPEs and base stations will be so enormous that the real throughput of the network will drop, resulting in a serious impact on end-user experience. To mitigate these effects, the CPE510 uses MAXtream TDMA Technology.   Pharos Control – Centralized Management System CPE510 also comes equipped with centralized management software that helps users easily manage all the devices in their network from a single PC - Pharos Control. Functions like device discovery, status monitoring, firmware upgrading, and network maintenance can be managed using Pharos Control.

Description: Details iShopping.pk brings you the best price for AKG CBL 410 Headphones With Mic & USB Adapter with express shipping all over Pakistan.   The black AKG CBL 410 Workstation Set consists of one CBL410 PCC black microphone, one K 20 Headphone, and one GHAP1 USB Adapter for use with one workstation. The CBL 410 PCC Conference & VoIP Microphone is designed to be an easy to use, straightforward desktop microphone for conference and communication via the internet, or for use with a computer. The microphone's low-profile design and omnidirectional polar pattern feature a wide frequency response for enhanced intelligibility. The CBL 410 PCC also features an input for cascading multiple microphones in multi-user applications and a mesh grill to protect the capsule. Its attached cable features a 1/8" (3.5 mm) connection. The K 20 stereo headphone is designed to be lightweight, conveniently foldable and comfortable. It is especially manufactured for heavy use in conference, VoIP, schools, and for tour guides, and has replaceable ear pads. The CBL 410 PCC Workstation Set comes complete with the GHAP1 USB adapter which has a stereo output for the K 20 or other headphones and an input for the CPL 410 PCC microphone.   Specifications: Microphone Polar Pattern Omnidirectional Transducer Back electret condenser Frequency Response 50 Hz to 20 kHz Impedance 2000 Ω +/- 30% @ 1000 Hz Sensitivity -42 dB ±3 dB (7.9 mV/Pa) SPL 120 dB (for 1% THD) Signal to Noise Ratio 58 dBA Current Consumption 0.5 mA Power Supply Input Voltage 1.5 to 5 VDC Connector 1/8" (3.5 mm) TRS mini Cable Length 39.4" (100 cm) Dimensions 4.5 x 4.5 x 0.8" (114 x 114 x 21 mm) Weight 5.6 oz (159 g) Headphones Type Dynamic, Supra-Aural, Open-Back Sensitivity 102 dB SPL / 1 mW Frequency Range 18 to 20,000 Hz Impedance 32 Ω Maximum Input Power 100 mW Cable Length Single-sided, 39.4" (100 cm) Connector 3.5 mm stereo jack Dimensions 6.3 x 5.3 x 2.4" (160 x 135 x 60 mm) Weight 4.2 oz (119 g) Adapter Connectivity USB Connections 1/8" (3.5 mm) TRS headphone output  1/8" (3.5 mm) microphone input

Description: Details iShopping.pk brings you the best price for Bosch CCSD-DL Discussion Device With Long Microphone with express shipping all over Pakistan.   Features: • Unique patent pending possible-to-speak indicator • Plug and play functionality for ensuring fast installation and reconfiguration times • Compact, attractive ergonomic design • Easily configured as a participant device or chairperson device • Immunity to mobile phone interference   Specifications: Power consumption 1.3 W Frequency response 30 Hz to 20 kHz (System electrical) THD S/N >93 dBA Sampling rate 44.1 kHz Headphones load impedance > 32 ohms Loudspeaker max. peak output power 4 W     Loudspeaker nominal output 72 dB SPL Participants loudspeaker frequency response 200 Hz to 16 kHz (acoustical) Microphone polar pattern Cardioid Participants microphone frequency response 125 Hz to 15 kHz Microphone nominal input 85 dB SPL Dimensions device without microphone(H x W x D) 64 x 203 x 146 mm(2.5 x 8.0 x 5.7 in) Height with microphone in horizontal position 130 mm (5.1 in) Length of microphone from mounting surface CCSD‑DS: 310 mm (12.2 in) CCSD‑DL: 480 mm (18.9 in) Weight Approx. 1 kg (2.2 lb) Mounting Tabletop (portable or fixed) Material (top) Plastic ABS+PC Material (base) Metal ZnAl4 Color (top) Traffic black (RAL 9017) matt-gloss Color (base) Pearl light grey (RAL 9022) matt-gloss Operating temperature 0 ºC to +35 ºC (+32 ºF to +95 ºF) Storage and transport temperature -40 ºC to +70 ºC(-40 ºF to +158 ºF) Relative humidity 5% to 98% non-condensing Air pressure 600 to 1100 hPa

Description: Details iShopping.pk brings you the best price for Revolabs Directional Tabletop Elite Wired Microphone White with express shipping all over Pakistan.   Revolabs' Elite wired microphones provide users with a unique combination of exceptional performance features and contemporary design elements to meet the demands of various conference environments. Using the same form factor and user interface these Elite wired microphones are also ideal for environments in which wired and wireless microphones are used in tandem, increasing the maximum number of microphones available in a space and combining wireless flexibility with the security of wired microphones. Revolabs' Elite wired microphones provide superior audio quality, setting ultimate standards for signal-to-noise ratio and the supported frequency range.   Features: • Superior audio quality • Audio dependability • Bright light indicator • Easy installation   Superior audio quality Flat frequency response across the supported bandwidth for realistic sound capture. Audio dependability Balanced output for increased immunity to noise over long cable runs. Bright light indicator LED lights indicator for mute status and control button.   Specifications: General Product Type Microphone Width 3.1 in Depth 3 in Height 1.7 in Weight 7.2 oz Color White Microphone Microphone Operation Mode Cardioid Connectivity Technology Wired Sensitivity -36 dBV/Pascal Impedance 150 Ohm Frequency Response 125 - 18000 Hz Signal-to-Noise Ratio 68 dB Dynamic Range 84 dB Audio Input Details Cardioid - 125 - 18000 Hz - Output Impedance 150 Ohm Connections Connector Type Microphone Miscellaneous Cables Included Microphone cable - 15 ft

Description: Details iShopping.pk brings you the best price for Revolabs Directional Tabletop Wired Microphone Brush Nickel with express shipping all over Pakistan.   Revolabs' Elite wired microphones provide users with a unique combination of exceptional performance features and contemporary design elements to meet the demands of various conference environments. Using the same form factor and user interface these Elite wired microphones are also ideal for environments in which wired and wireless microphones are used in tandem, increasing the maximum number of microphones available in a space and combining wireless flexibility with the security of wired microphones. Revolabs' Elite wired microphones provide superior audio quality, setting ultimate standards for signal-to-noise ratio and the supported frequency range.   Features: • Superior audio quality •  Audio dependability •  Bright light indicator •  Easy installation   Superior audio quality Flat frequency response across the supported bandwidth for realistic sound capture. Audio dependability Balanced output for increased immunity to noise over long cable runs. Bright light indicator LED lights indicator for mute status and control button.   Specifications: General Product Type Microphone Width 3.1 in Depth 3 in Height 1.7 in Weight 7.2 oz Color Brushed nickel Image Color Disclaimer The displayed product image may be a different color Microphone Microphone Operation Mode Cardioid Connectivity Technology Wired Sensitivity -36 dBV/Pascal Impedance 150 Ohm Frequency Response 125 - 18000 Hz Signal-to-Noise Ratio 68 dB Dynamic Range 84 dB Audio Input Details Cardioid - 125 - 18000 Hz - Output Impedance 150 Ohm Connections Connector Type Microphone Miscellaneous Cables Included Microphone cable - 15 ft