One station

Description: Details iShopping.pk brings you the best price for AKG CS 5 DU Conference Delegate Microphone Station with express shipping all over Pakistan.   The CS 5 DU Conference Delegate Microphone Station by AKG is the basic microphone station for use with the CS 5 Conference System. The CS 5 microphone station is designed to provide both ergonomic and acoustic flexibility. Choose from two goosenecks of different lengths, and five microphones with different polar patterns to meet the various requirements of your particular conference system. There is also a push-to-talk (PTT) key so the conference delegate can easily engage or disengage their microphone for speaking. In addition to the PTT key, this microphone station offers a bank of dip switches that allows each of the two headphone outputs to be assigned independently to either the floor channel or one of three interpreted language channels. The PTT key also provides a simple yes/no voting function. The CS 5 DU is daisy chainable with other microphone stations using CAT 5/RJ 45 cables. Audio input and output, power and voting can all be distributed over the CAT 5/RJ 45 cables.   Features: • To be used with the CS 5 BU Base Unit and the CS 5 VU Voting/Chairperson Station • The PTT key also provides a simple yes/no voting function that is transmitted to the CS 5 VU Voting/Chairperson Station for tabulation • Up to twelve CS 5 DU microphone stations can be powered by one CS 5 PS 12 power supply   Specifications: Power Supply Supply Voltage 46 V, minimum  48 V, nominal  50 V, maximum Power Consumption 1.5 W, nominal  3 W, maximum Headphone Output Power 30 mW, nominal 60 mW, maximum Load Impedance 8 ohms, minimum  32, ohms, nominal Frequency Range 45 Hz - 22 kHz Audio Output Jack 1/4" TRS jack (tip - right, ring - left, sleeve - ground) Other Specifications Signal to Noise Ratio 70 dB I/O Connections 8-pin RJ45: Pin 1 - Data send + Pin 2 - data send - Pin 3 - data receive + Pin 4 - 48 VDC Pin 5 - 48 VDC Pin 6 - data receive - Pin 7 - ground Pin 8 - ground Dimensions (WxDxH) 10.1 x 5.8 x 1.9" (257 x 147 x 73 mm)

Description: Details iShopping.pk brings you the best price for Shure 4-Port Networked Charging Station (MXWNCS4) with express shipping all over Pakistan.   The  MXWNCS4 4-Port Networked Charging Station  from Shure is designed to provide networked charging for up to 4 Microflex wireless transmitter units. Thanks to its networking abilities, the MXWNCS4 can display charge time info to networked computers in addition to being able to assign channels to docked transmitters.   Features: • Station accepts all Microflex Wireless transmitters • Charge status indicators: 5-segment LEDs on the unit display charge status individually for every docked microphone • Remote charge status monitoring: Ethernet connection to the system enables remote monitoring of battery charge status in hours and minutes via the control software or third party control systems • Transmitter linking: Assign docked wireless microphones to channels on an Access Point Transceiver by simply pressing "link" • Rapid charge times: Reaches 50% charge in one hour and fully charges transmitters in two hours • Overcharge protection: Smart recharging circuitry safeguards against battery damage and extends life cycles   Specifications: Charge Time MXW1, MXW6, MXW8: 50% = 1 hour, 100% = 2 hours  MXW2: 50% = 1.5 hours, 100% = 3 hours Network Interface 10/100 Mbps Ethernet Power Requirement 15 V DC @ 3.3 A maximum, supplied by external power supply (tip positive) Housing Molded plastic, cast zinc Dimensions (HxWxD) 2.7 x 7.5 x 7.25" (68 x 191 x 184 mm) Weight 3.7 lb (1.7 kg)

Easy Petrol Pump And CNG Filling Station Software In Urdu With Discount Offer Rs.19,999/- LIfe Time One Time Purchase OnlyOne Year Free Service Free Teaning. http://easyonesoft.com/ Easy Petrol Pump & CNG Station.Filling Station Software In Urdu With Auto SMS & Email System 033 666 888 99 - 031 31 88 11 00 - 0303 304 88 99 - 0341 545 88 99

Description: Details iShopping.pk brings you the best price for Apple AirPort Extreme Base Station (MC414) with 1 year international warranty and express shipping all over Pakistan.   Overview Featuring a compact design, AirPort Express supports simultaneous dual-band 802.11n Wi-Fi. Set up your wireless network quickly and easily using your iPhone, iPad, iPod touch, Mac, or PC. Create a network just for guests. Stream music to any room in the house. And print from any room in the house, too. All with fast wireless technology.    Easy Wi-Fi setup using iPhone, iPad, or Mac.   Connect your DSL or cable modem to AirPort Express and create your new wireless network in just a few taps from your iPhone, iPad, or iPod touch. Or use the built-in AirPort Utility on your Mac. Setup is just as fast and just as easy.     Simultaneous dual-band 802.11n. AirPort Express lets Wi-Fi-enabled devices connect to your network on the 2.4GHz and 5GHz wireless bands. Which means every connected device automatically uses the best band available for the fastest possible performance.   Stream music with AirPlay. AirPlay takes the music from the iTunes library on your computer or iOS device and sends it wirelessly to any connected stereo or speakers in your home (audio cable sold separately). Play music on one set of speakers — or if you have more than one AirPort Express connected to speakers, play your music from iTunes on all of them at the same time.   Print wirelessly from any room. On the back of AirPort Express is a USB port that’s made for your printer. Just plug it in and instantly it’s like having a printer in every room. And since AirPort Express works with Mac and PC, everyone in the house can take advantage of one centrally available printer.     Compatibility and security. AirPort Express is compatible with devices using the 802.11a, 802.11b, 802.11g, and 802.11n specifications. So no matter what Wi-Fi device you’re using, it will work with AirPort Express. AirPort Express also features a built-in firewall to protect your network from malicious Internet attacks. The firewall is automatically turned on, so you don’t have to do a thing.   Create a guest network. Set up a separate Wi-Fi network with a separate password just for your guests. Simply enable the guest networking feature, and your guests can access the Internet but not other parts of your primary network, such as your computers, printers, and LAN-attached hard drives.   System Requirements Setup and Administration •  iOS device with iOS 6 or later and AirPort Utility •  Mac with OS X Lion v10.7.3 or later and AirPort Utility 6.1 •  Mac with OS X v10.5.7 or later and AirPort Utility 5.6.1 •  PC with Windows 7 or later and AirPort Utility 5.6.1 Shared Printing with a USB Printer •  USB printer •  Mac with OS X v10.2.7 or later •  PC with Windows XP (SP3), Windows Vista (SP2), Windows 7 (SP1), or Windows 8 Wireless Device Access •  Any Wi-Fi-enabled device that uses the 802.11a/b/g/n specification

5GHz 802.11a/n hi-power (27dBm) 2x2 MIMO AirMax TDMA PoE station. This is the ultimate 5Ghz wireless outdoor CPE with integrated 14dBi dual polarity antenna. Product Includes: - One (1) Nanostation 5.8GHz - One (1) Power Injector: 110-240VAC 24VDC 0.5A US-style plug. - Mount and mounting strap (NanoBracket sold seperately) Featuring a compact indoor/outdoor design and an interface, it is so intuitive even the most technically challenged can instantly become experts. But don't be fooled--it is as powerful as it is simple. NanoStation packs some phenomenal performance with a revolutionary design combining a high gain antenna system, advanced radio architecture and highly researched and developed firmware technology allowing throughput, stability and capacity performance rivaling even the highest-end WiMax networks http://dreamsnw.com/nanostation-m5 Avalaible at Dreams Network & Technology (Pvt) Ltd. Contact: LHR: 04235784892 KHI: 02134710763, 02134711677, 02134721416

Easy petrol pump and CNG station What are the 12 most important things we can see on a page between daily shifts? - Shift date. Start and end time - Description of nozzle readings - Credit and cash cell - Product sales - Recovery - Record of expenses - Complete shift cell and cash story - Arrival stock - Dip reading with loss or gain. Payment to supplier. Cash and bank accounts. Mutual transfer in cash and bank accounts Price: 50000. Now available at 50% Discount @ 25000/- Life Time (One Time Purchase Only) Website http://easyonesoft.com

Description: Details iShopping.pk brings you the best price for Shure Networked 2-Port Charging Station (MXWNCS2) with express shipping all over Pakistan.   The MXWNCS2 Networked 2-Port Charging Station from Shure is capable of charging MXW1 and MXW6 microphone transmitters (not compatible with MXW8 gooseneck microphones). It also links the microphones to access point channels and networks battery statistics to the control software.   Features: Charge Status Indicators 5-segment LEDs on the unit display charge status individually for every docked microphone transmitter Remote Charge Status Monitoring Ethernet connection to the system enables remote monitoring of battery charge status in hours and minutes via Microflex Wireless Control Software or third-party control systems Easy Transmitter Linking Assign docked wireless microphones to channels on an access point transceiver by simply pressing "Link Rapid Charge Times Reaches 50% charge in one hour and fully charges transmitters in two hours Overcharge Protection Smart recharging circuitry safeguards against battery damage and extends life cycles

DESCRIPTION Huawei HW-01H and HW-02G Wi-Fi station This high-speed communication WiFi router supports Premium 4GTM at 370 Mbps and has a large-capacity, 4,750 mAh battery. The HW-01H has a mobile charging feature that can charge your smartphone or tablet via a twelve-hour continuous connection ensuring that even when you are out, comfortable high-speed communication remains possible for long periods of time. We have created a design that has an optimal footprint and balance between area and thickness so that the device can fit into a bag or pocket despite being a large-capacity mobile router. With a quality feel and 3D texture on the rear surface, the HW-01H is easy to both carry and use. Cash one Delivery Available for All Pakistan عدن کمیونیکیشن کلیارچوک جرنیلی روڈکندیاں میانوالی, Kundian, Rawalpindi, Punjab, Pakistan

DESCRIPTION HP 100B All In One Pc For Sale Complete Set With All The Accessories Processor: AMD E - 350, 1.60 Ghz RAM: 8 GB HDD: 500 GB This comes with an adapter b'&' Original HP Mouse b'&' Keyboard Qty: 5 Complete Sets In Perfect Condition Price: 27500 / Per Set (Slightyly Negotiable) Intrested Buyers May Contact Only Time Wasters Kindly Stay Away !!! Millat Road, Gul Colony, Ghazi Road, Nearby Qainchi Metro Station, Lahore, Punjab, Pakistan

DESCRIPTION *Docking Interface: USB-C *Video Ports: Two DisplayPort | Two HDMI | One Thunderbolt 3 DownStream Port (video/data). *USB Ports: Five USB 3.1 Gen 2 (1 provide always-on mobile device charging). *Networking: Gigabit Ethernet Port. *Audio: 3.5 mm Stereo/Microphone Combo Port. *Security: Kensington Lock Slot. *Condition: 10 to 10. # Buy online, feel free to contact. # For online order call or WhatsApp. Mention that you found this ad on DealMarkaz.pk when you call.

DESCRIPTION *Docking Interface: USB-C *Video Ports: Two DisplayPort | Two HDMI | One Thunderbolt 3 DownStream Port (video/data). *USB Ports: Five USB 3.1 Gen 2 (1 provide always-on mobile device charging). *Networking: Gigabit Ethernet Port. *Audio: 3.5 mm Stereo/Microphone Combo Port. *Security: Kensington Lock Slot. *Condition: 10 to 10. # Buy online, feel free to contact. # For online order call or WhatsApp. Saddar, Karachi, Sindh, Pakistan

Description: Details iShopping.pk brings you the best price for Tenda O6 Wireless 5GHz 11AC N433 Outdoor Point To Point CPE with express shipping all over Pakistan.   O6 5GHz 433Mbps outdoor Point to Point CPE is designed to WISP CPE solutions and long distance wireless network solutions for video surveillance and data transmission. It features with an external power amplifier and a built-in 16dBi directional antenna to provide an efficient way to pick up and maintains a stable signal for a wireless network connection range up to 10 kilometers. 5GHz 11AC 433Mbps O6 adopts of 11AC technology and gigabit ethernet port to boost the throughput performance on the wireless connection. 10km+ Wireless Data Transmission O6 is specially designed for outdoor long range point to point application scenarios. Adopt of external power amplifier and 16dBi antenna to achieve 10km+ wireless data transmission range. Bridge two device at a push of button O6 comes with an operating mode switch, you can switch the device to work as AP mode or Station mode without login to web UI. When one works as AP mode and another works as Station(Client) mode, you can bridge two devices together at a push of Bridge/RST button. Smart Signal Indicator LED 3 signal LED Lights represent the currently signal strength that O6 receives from peer device.It is helpful to find the right location to deploy the device and achieve a better performance. Advanced Antenna System O6 adopts of specific antenna array and metal reflector to deliver higher gain and optimized transmission quality. Professional Outdoor Design Equipped with IP64 waterproof enclouse and 6kv lightning protection capability, O6 can work in various weather conditions, such as sunshine, rainfall, wind, snow or extremely low/high temperature environment Multiple Application Scenarios Long-Distance Wireless Connection One work as AP mode and another work as Station mode to create a long distance wrieless connecton for video surveillance and data transmission. WISP(Client+Router) Mode Wirelessly connect to WISP station/hotspot to share Internet to local wireless and wired network. Easy to Manage O6 also comes with a centralized management software that helps users easily manage all the devices in their network from a single computer-- CPE Assistant. Specifications:   Dimension                                                                                          270*94.86*67.5mm                                                                              Frequency Range 5GHz Maximum wireless speed 433Mbps CPU Processor Broadcom 800MHz GND Terminal 1 Interface 1*GE PoE/WAN/LAN port Mode Switch Station: The device only work in Station mode Off: The device work on AP/Station/Universal Repeater/WISP/Router mode AP: The device only work in AP mode Button Reset: Press 10 seconds or more to restore to default settings Bridge: Press 3 seconds and release it to bridge uplink AP Antenna 16dbi Directional Antenna Antenna Beamwidth Horizontal: 30° Vertical: 15° Maximum Consumption 9W Lightning Protection 6KV Waterproof Level IP64 LED LAN,LED1,LED2,LED3 Power Supply 24v 0.5A PoE Injector Operating mode AP/Station/Universal Repeater/WISP/Router Standard&Protocol IEEE 802.11ac/n/a Wireless Speed Enable/Disable Wireless Radio SSID Hidden Wireless Client isolation Sensitivity Threshold WMM Capable APSD Capable Wireless Access Control Wireless Client list Wireless Security 64/128 WEP,WPA-PSK,WPA2-PSK,WPA&WPA2-PSK,WPA,WPA2 Transmit Power Adjustable power by 1dBm Reception Sensitivity MCS0: -90dbm MCS7: -72dbm DHCP Server DHCP Server Clients list VPN Pass-through PPTP,L2TP Ping Watchdog Support Speed Test Support Remote Web access Support Schedule Reboot Support Page Timeout Support Dyndns noip, dyndns.org Network Diagnoses Ping, Traceroute, Signal Scan Management Tool Time&Date Setting System Log Firmware update Backup/Restore Configuration Username Managerment Temperature Operating Temperature:-20℃ ~ 55℃ Storage Temperature:-40℃ ~ 70℃ Humidity Operating Humidity:10%~90% non-condensing Storage Humidity:10%~90% non-condensing Default Settings IP Address: 192.168.2.1 Login Username:admin Login Password:admin Certification FCC/CE/RoHS

Nanostation M5 5GHz 802.11a/n hi-power (27dBm) 2x2 MIMO airMAX TDMA PoE station. This is the ultimate 5Ghz wireless outdoor CPE with integrated 14dBi dual polarity antenna. Product Includes: • One (1) Nanostation M5 5.8GHz • One (1) Power Injector: 110-240VAC 24VDC 0.5A US-style plug.  • Mount and mounting strap (NanoBracket sold separately) Featuring a compact indoor/outdoor design and an interface, it is so intuitive even the most technically challenged can instantly become experts. But don't be fooled--it is as powerful as it is simple. NanoStation packs some phenomenal performance with a revolutionary design combining a high gain antenna system, advanced radio architecture and highly researched and developed firmware technology allowing throughput, stability and capacity performance rivaling even the highest-end WiMax networks The NanoStation M5 makes a perfect CPE device when pared with the Ubiquiti Rocket M5 and AirMax Sector or a Dish Antenna. We also recommend to upgrade your AirOS software to the latest version by visiting UBNT Software Downloads. This device can also be used for short LOS PtP links by placing one unit in Access Point WDS Mode and the other unit into Station WDS. NanoStation M5 Features: • Great Performance: 150+ Mbps real outdoor throughput and up to 15km+ range. Typical range is 2-4 miles from a LOS tower running airMAX sector antenna's and Rocket M5's.  • Next-Gen Antenna Design: 11dBi dual-polarity gain at 5GHz with optimized cross-polarity isolation in a compact form-factor. • Dual Ethernet Connectivity: A secondary Ethernet port with software enabled POE output for seamless IP Video integration. • Intelligent POE: Remote hardware reset circuitry of NanoStation M allows for device to be reset remotely from power supply location.  • 802.3af 48V Compliant - Easily becomes 802.3af 48V compliant through use of Ubiquiti Instant 802.3af adapter. The adapter sold separately (SKU#I8023AF-OD or I8023AF-ID)  • Easy Installation - Easily mountable to a pole/mast with mounting straps provided. In addition, the NanoStation M5 can be mounted and adjusted in any direction in a 90-degree angle through the use the NanoBracket. The NanoBracket is sold separately (SKU#MT-NANO U) NanoStation M5 Specifications: • Operating Frequency: 5170 - 5875 Mhz. NOTE: Only 5745-5825 Mhz is supported in the USA and Canada. It is the operator's responsibility to follow local country regulations including operation within legal frequency channels, output power, and Dynamic Frequency Selection (DFS) requirements. • Processor Specs: Atheros MIPS 24KC, 400MHz • Wireless: 5Ghz Atheros, 27dBm Adjustable down to 8dBm, AES Encryption • Memory Information: 32MB SDRAM, 8MB Flash • Networking Interface: 2 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface, PoE Passthrough • Mount and mounting strap (Nanobracket is optional, sold separately) • Operating Temperature: -30C to +80C • Power Method: Passive PoE • Power Consumption: 8 Watts • Power Supply (included): Power Injector 110-240VAC 24VDC.5A North American-style plug • Size: 29.4 cm x 8 cm x 3cm, Weight:.4kg • Approvals: FCC Part 15.247, IC RS210, CE • RoHS Compliance: YES Technical Information and Support: Nanostation M5 Data Sheet Nanostation Quick Start Guide AirMax CPE Quick Start Guide

Description: Details iShopping.pk brings you the best price for Tenda O6 Wireless 5GHz 11AC N433 Outdoor Point To Point CPE with express shipping all over Pakistan.   O3 2.4GHz Outdoor CPE is designed to WISP CPE solutions and long distance wireless network solutions for video surveillance and data transmission. It features with 12dBi directional antenna to provide an efficient way to pick up and maintain a stable signal for a wireless network. Adopt of auto-bridging technology,two CPE can connect to each other automatically to make it easy to setup. What it does O3 2.4GHz Outdoor CPE is designed to WISP CPE solutions and long distance wireless network solutions for video surveillance and data transmission. It features with 12dBi directional antenna to provide an efficient way to pick up and maintain a stable signal for a wireless network. Adopt of auto-bridging technology,two CPE can connect to each other automatically to make it easy to setup. 5km+ transmission Range O3 adopts of independent power amplifier and 12dBi directional antenna to provide an efficient way to pick up and maintain a stable signal for a wireless network up to 5km. Auto-bridge For Two Device O3 adopts of auto-bridge technology,two cpe can connect to each other when you power on them face to face. It is very easy to setup for CCTV surveillance and data. Smart Signal Indicator LED 3 signal LED Lights represent the currently signal strength that O3 receives from peer device.It is helpful to find the right location to deploy the device and achieve a better performance. Professional Outdoor Design Equipped with IP64 waterproof enclouse and high quality hardware design, O3 can work in various weather conditions, such as sunshine, rainfall or extremely low/high temperature environment Multiple Application Scenarios Long-Distance Wireless Connection One work as AP mode and another work as Station mode to create a long distance wrieless connecton for video surveillance and data transmission. WISP(Client+Router) Mode Wirelessly connect to WISP station/hotspot to share Internet to local wireless and wired network. P2MP Link Link multi AP in a network, all the associated client can communicate with each other. Easy to Setup and Manage O3 comes with a centralized management software that helps users easily to manage all the devices in the network from a single PC-CPE Assistant.   Specifications: Mode                                                                                                 O3 Dimension 270*94.86*67.5mm Deployment Pole Mount Application Scenarios WISP CPE, Data transmission and Long range video surveillance Frequency 2.4GHz Maximum wireless speed 150Mbps Interface 2*10/100Mbps Ethernet Port Antenna 12dbi Antenna Beamwidth Horizontal: 60° Elevation: 30° Reset Button 1 GND Terminal 1 Power Consumption 4.3W Waterproof Level IP64 LED indicator PoE/LAN,LED1,LED2,LED3 Power Method 12V1A Passive PoE Lightning Protection 6000V Passive PoE power supply Passive power over ethenet via PoE/LAN (4,5pins -7,8pins) Voltage range: 11-13.8V DC Reception Sensitivity MCS0: -96dbm MCS7: -72dbm Operating mode AP/Station/WISP/P2MP/WDS Repeater/Router Standard&Protocol IEEE 802.11b/g/n Enable/Disable Wireless Radio Support SSID Hidden Support Wireless Client isolation Support SSID Isolation Support Client Limitation For SSID Support Wireless Access Control Support Weak Signal Client Limitation Support Transmit Power Adjustable power by 1dBm WMM Capable Support APSD Capable Support Wireless Security 64/128 WEP,WPA-PSK,WPA2-PSK,WPA&WPA2-PSK,WPA,WPA2 Transmission Media Support VLAN Tagging for SSID Support DHCP Server Support VPN Pass-through PPTP,L2TP Remote Web access Support Schedule Reboot Support Page Timeout Support Ping Watchdog Support Dyndns noip, dyndns.org Network Diagnoses Ping, Traceroute, Signal Scan Time&Date Setting Support Firmware Upgrade Support Backup/Restore Configuration Support Username Managerment Support Syslog Support Managed By Controller PC Software -- CPE Assistant Package Content 1*5km Point to Point Outdoor CPE 1*Power Adapter 1*PoE Injector 2*Plastic Staps 1*Quick Installation Guide Temperature Operating Temperature:-30℃ ~ 60℃ Storage Temperature:-40℃ ~ 70℃ Humidity Operating Humidity:10%~90% non-condensing Storage Humidity:10%~90% non-condensing Default Settings Default login IP:192.168.2.1 Default Login Username:admin Default Login Password:admin Certification FCC/CE/RoHS

Description: Details iShopping.pk brings you the best price for Toa Electronics Central Control Mixer Unit (TS-770) with express shipping all over Pakistan.   The Toa TS-770 Central Control Unit is designed for use with the Toa TS-770 conference system. The TS-770 is the control unit for the TS-771 chairman station, TS-772 delegate station and TS-775 remote delegate interface. Up to 70 stations can be connected to one TS-770, and up to three TS-770 units can be chained for control of up to 210 stations. The compact, intuitive TS-770 provides a host of features that include microphone-off position switches that automatically switch off microphones after 20 or 40 seconds of silence. Three limiter settings adjust the level threshold and avoid distortion caused by loud talkers. The front panel features level control for microphone and line level signal and two jacks provide connections for an auxiliary microphone and line level device.   Features: Control of Up to 70 Stations Up to 70 stations can be connected to one TS-770, and up to three TS-770 units can be chained for control of up to 210 stations. Automatic Microphone-Off Function The compact, intuitive TS-770 provides a host of features that include microphone-off position switches that automatically switch off microphones after 20 or 40 seconds of silence. Three Position Limiter Three limiter settings adjust the level threshold and avoid distortion caused by loud talkers. Auxiliary Inputs The front panel features level control for microphone and line level signal and two jacks provide connections for an auxiliary microphone and line level device.   Specifications: Inputs Line - 8-pin Connector x2  EXT 1 / EXT 2 - RCA Phono x2 Equalizer In - 1/4" Phone  Aux Mic - 1/4" Phone Aux Line - 1/4" Phone Outputs EXT 1 / EXT 2 - RCA Phono x2  Rec Out - Stereo 1/4" Phone & 1/8" Mini Multi-Pin I/O Connectors No Frequency Response Not Specified By Manufacturer Signal-to-Noise Ratio Not Specified By Manufacturer Distortion Not Specified By Manufacturer Power Requirements AC Mains, 50/60Hz Power Consumption 60W Dimensions (WxHxD) 8.27 x 4.22 x 12.44" (210 x 107.1 x 316mm) Weight 8.82 lb (4 kg)

D-Link KVM-440 8-Port PS2 USB Combo KVM Switch Two Systems, One Solution Control two computers using one monitor, USB keyboard, and USB mouse with D-Link’s 2-Port USB KVM Switch with Audio Support (KVM-221). The KVM-221 allows users to effortlessly control two systems without having to buy additional computer peripherals. It is ideal for the home office where business files are kept on one computer and personal files on another. With the built-in audio support, you can also share a set of speakers between two computers. Listen to music on one computer while having quick access to resources on the second computer! You can even dedicate one computer as a music server. Maximize Your Desk Space Since the KVM-221 manages two computers using only one monitor, keyboard, and mouse, it frees up your desktop space, minimizing wires and extra devices that would be needed otherwise. In addition, the KVM-221 is compact in size, making it fit into virtually any workspace. Easy Installation The KVM-221 is easy to install and even easier to use. No drivers or software is required. It is a true plug and play device that will have you up and running quickly. Once connected, you can easily switch between the two computers with the front panel “select” button and keyboard hot keys. Simple to install and easy to use, the 2-Port USB KVM Switch with Audio Support (KVM-221) is the ideal solution if you are looking for a dedicated music server, a professional working from home, or you’re simply looking to add another computer to your work station. What This Product Does The D-Link 2-port KVM Switch with Audio Support (KVM-221) allows you to control two computers with a single monitor, USB keyboard, and USB mouse. Use the “select” button or keyboard hot keys to easily switch between two computers and perform multiple tasks. Unclutter your desktop and simplify your workspace with the compact D-Link KVM-221 KVM Switch. Multitasking with Music The built-in audio support allows you to share a set of speakers with two computers. This enables you to listen to Internet radio or voice conferences on one computer while surfing the web or performing other tasks simultaneously on the other. Use one computer as a dedicated music server while having full access to the other computer’s system resources. Specifications Computer Connections   Single KVM: 8 Cascade Chaining: Up to 512 Selection Method   Switch Button, Hot-Keys (PS/2 Keyboard), and On-Screen-Display (OSD) LEDs   Red for PC Selected Green for PC On-Line/Ready PC Connectors   8 x HDB-15 female Support both PS/2 and USB platform servers Console Ports   Keyboard: 1 x 6 pin mini-DIN female Mouse: 1 x 6 pin mini-DIN female Video: 1 x HDB-15 female Firmware Upgrade Port   Mini USB Auto-Scan Interval   5 - 90 seconds Video Resolution   Max. resolution up to 2048 x 1536 @ 65 Hz Hot-swappable   Yes Operating Systems Supported   Windows 98SE/ME/2000/2003/2008/XP/Vista/7, Linux, Mac OS 9/OS X and Sun Microsystems Power   5V, 2A Housing Material   Metal Operating Temperature   32°-122°F (0-50°C) Humidity   0%-80% Relative Humidity Certifications   FCC, CE, C-Tick, IC, CSA Dimensions (L x W x H)   17.3 x 6.1 x 1.5 inches (44 x 15.7 x 4.5 cm) Weight   3.9 lbs (1750 g) Warranty   1 Year Limited2 Package Contents   8-Port PS2/USB Combo KVM Switch (KVM-440) 4 sets of 6ft 4-in-1 PS2/USB KVM cable Rack Mount Bracket Kit Set Power Adapter CD-ROM with Manual and Software uick Install Guide

Description: Details iShopping.pk brings you the best price for Bosch CCS-CU Control Unit For CCS 900 Ultro Conference System with express shipping all over Pakistan.   The Bosch CCS-CU Control Unit is the central power and control station for all CCS 900 Ultro Conference System contributor units, such as the chairman and delegate units. The control unit will supply power for up to 50 delegate / chairman units, and provide control for up to 150. The unit features a built in speaker and automated, programmable control over contributor units without the need for an operator. Its Digital Acoustic Feedback Suppression (DAFS) eliminates feedback howling and maintains clear, intelligible speech. Plenty of connections allow for interfacing within paging systems, amplifier systems, recording devices and more. The unit is feature rich, however its control section is straightforward and intuitive to operate in any conference setting.   Features: Discussion Control Without Operator The CU can be setup to operate standalone without the need for an operator. The following 5 modes can be chosen using a rotary control on the unit's top panel: • Open mode - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active • Open mode with auto-switch-off - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active. If the delegate does not speak for 30 seconds, microphones are automatically switched off • Override mode - delegates can override each other simply by activating their microphones. Only one microphone can be active at any one time. (Note: In override mode, delegates cannot override chairmen) • Chairman only mode - only chairmen can speak. Delegate microphones cannot be activated, even when a chairman is not speaking • Test mode - checks if system connections are correct. All microphone light rings and contribution unit LEDs light up to indicate that units are properly connected Supplies Power for up to 50 Contribution Units The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to connect 25 contribution units to each trunk output, with a maximum system cable length of 109.3 yards (100m). Provides Control for up to 150 Contribution Units Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150 contribution units. In this configuration a single CU acts as a master controller for the entire system. Built-in Monitor Loudspeaker The built-in monitor loudspeaker and headphone socket allow the conference to be monitored. Interfaces the System With External Equipment The following equipment can be interfaced to the CCS Ultro Discussion System through the CU: • External wired or wireless microphone - for guest speakers or audience participation. (Note: The external microphone is muted when the priority button on a chairman unit is pressed, and when the system is operating in 'chairman only' mode) • External PA system - for transmitting the proceedings to an audience in the same room or an adjacent room• Tape recorder - for external recording and playing back meetings and discussions • Audio equipment - for providing background music • Telephone coupler - to allow a remote delegate to participate via telephone• External audio processing - an insertion connector is provided Controls and Indicators (Top) • Mains on/off switch • Graphical display for status information (CCS‐CURD) • 5 soft buttons for configuration and control of thebuilt-in MP3 recorder (CCS‐CURD) • Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This control also determines the maximum level for the headphone outputs of the contribution units and the CU. • Microphone mode rotary switch, for setting the number of simultaneously active microphones, and selecting one of the four operation modes (plus test mode) • Power on LED Controls and Indicators (Back) • On/off switch for digital acoustic feedback suppression facility (CCS‐CUD, CCS‐CURD)• Microphone input gain adjustment • External recorder input gain adjustment• Insertion connector bypass switch   Specifications: Connections Top • 1x 0.14" (3.5mm) stereo headphone socket Back • 1x AC input • 2x 7-pole circular female connectors, trunk in/out loop through interconnection  • 1x 3-pole female XLR connector, microphone input (can be used as line input by included 50dB attenuator) • 1 x Cinch connector pair, line input/output  • 1 x Cinch connector pair, telephone input/output • 1 x Cinch connector pair, insertion input/output  • 2 x Cinch connector pairs (R/L channel), external recorder input/output • USB interface (CCS-CURD) Power Supply Mains voltage: 100 to 240 VAC ± 10% Current consumption: maximum 0.9A (100 VAC) to 0.3 A (240 VAC) DC supply to contribution units: 24V ± 1V (current limited) Volume mute (50dB att.) + 10 steps of 1.9dB Limiter 10dB above nominal level loudspeaker / headphone Gain Gain reduction due to number of open microphones (NOM): ÷ NOM ± 1 dB Total Harmonic Distortion Nominal input (85 dB SPL): Max. input (110 dB SPL): Sample Rate Recording: 32kHz Playback: 32, 44.1, 48kHz Bit Rate Recording: 64, 96, 128, 192, 256 KBit/sec Playback: any bitrate Mount Tabletop (portable or fixed) 19-inch rack flush mounting Material Top: polymer Bottom: painted metal Color Charcoal and Black Dimensions (HxWxD) 3.4 x 14.2 x 5.6" (84 x 361 x 143mm) Height of feet: 0.22" (5.5mm) Weight 3.3 lb (1.5kg)

Description: Details iShopping.pk brings you the best price for Bosch CCS-CUD Control Unit For CCS 900 Ultro Conference System with express shipping all over Pakistan.   The Bosch CCS-CUD Control Unit is the central power and control station for all CCS 900 Ultro Conference System contributor units, such as the chairman and delegate units. The control unit will supply power for up to 50 delegate / chairman units, and provide control for up to 150. The unit features a built in speaker and automated, programmable control over contributor units without the need for an operator. Its Digital Acoustic Feedback Suppression (DAFS) eliminates feedback howling and maintains clear, intelligible speech. Plenty of connections allow for interfacing within paging systems, amplifier systems, recording devices and more. The unit is feature rich, however its control section is straightforward and intuitive to operate in any conference setting.   Features: Digital Acoustic Feedback Suppression The digital acoustic feedback suppression facility automatically eliminates acoustic feedback (also known as 'howling' or 'Larsen effect'). This gives better speech intelligibility by allowing the speaker volume to be turned up as loud as required without any risk of feedback. Discussion Control Without Operator The CU can be setup to operate standalone without the need for an operator. The following 5 modes can be chosen using a rotary control on the unit's top panel: • Open mode - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active • Open mode with auto-switch-off - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active. If the delegate does not speak for 30 seconds, microphones are automatically switched off • Override mode - delegates can override each other simply by activating their microphones. Only one microphone can be active at any one time. (Note: In override mode, delegates cannot override chairmen) • Chairman only mode - only chairmen can speak. Delegate microphones cannot be activated, even when a chairman is not speaking • Test mode - checks if system connections are correct. All microphone light rings and contribution unit LEDs light up to indicate that units are properly connected Supplies Power for up to 50 Contribution Units The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to connect 25 contribution units to each trunk output, with a maximum system cable length of 109.3 yards (100m). Provides Control for up to 150 Contribution Units Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150 contribution units. In this configuration a single CU acts as a master controller for the entire system. Built-in Monitor Loudspeaker The built-in monitor loudspeaker and headphone socket allow the conference to be monitored. Interfaces the System With External Equipment The following equipment can be interfaced to the CCS Ultro Discussion System through the CU: • External wired or wireless microphone - for guest speakers or audience participation. (Note: The external microphone is muted when the priority button on a chairman unit is pressed, and when the system is operating in 'chairman only' mode) • External PA system - for transmitting the proceedings to an audience in the same room or an adjacent room• Tape recorder - for external recording and playing back meetings and discussions • Audio equipment - for providing background music • Telephone coupler - to allow a remote delegate to participate via telephone• External audio processing - an insertion connector is provided Controls and Indicators (Top) • Mains on/off switch • Graphical display for status information (CCS‐CURD) • 5 soft buttons for configuration and control of thebuilt-in MP3 recorder (CCS‐CURD) • Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This control also determines the maximum level for the headphone outputs of the contribution units and the CU. • Microphone mode rotary switch, for setting the number of simultaneously active microphones, and selecting one of the four operation modes (plus test mode) • Power on LED Controls and Indicators (Back) • On/off switch for digital acoustic feedback suppression facility (CCS‐CUD, CCS‐CURD)• Microphone input gain adjustment • External recorder input gain adjustment• Insertion connector bypass switch   Specifications: Connections Top • 1x 0.14" (3.5mm) stereo headphone socket Back • 1x AC input • 2x 7-pole circular female connectors, trunk in/out loop through interconnection  • 1x 3-pole female XLR connector, microphone input (can be used as line input by included 50dB attenuator) • 1 x Cinch connector pair, line input/output  • 1 x Cinch connector pair, telephone input/output • 1 x Cinch connector pair, insertion input/output  • 2 x Cinch connector pairs (R/L channel), external recorder input/output • USB interface (CCS-CURD) Power Supply Mains voltage: 100 to 240 VAC ± 10% Current consumption: maximum 0.9A (100 VAC) to 0.3 A (240 VAC) DC supply to contribution units: 24V ± 1V (current limited) Volume mute (50dB att.) + 10 steps of 1.9dB Limiter 10dB above nominal level loudspeaker / headphone Gain Gain reduction due to number of open microphones (NOM): ÷ NOM ± 1 dB Total Harmonic Distortion Nominal input (85 dB SPL): Max. input (110 dB SPL): Sample Rate Recording: 32kHz Playback: 32, 44.1, 48kHz Bit Rate Recording: 64, 96, 128, 192, 256 KBit/sec Playback: any bitrate Mount Tabletop (portable or fixed) 19-inch rack flush mounting Material Top: polymer Bottom: painted metal Color Charcoal and Black Dimensions (HxWxD) 3.4 x 14.2 x 5.6" (84 x 361 x 143mm) Height of feet: 0.22" (5.5mm) Weight 3.3 lb (1.5kg)

Description: Details iShopping.pk brings you the best price for Bosch CCS-CU Control Unit For CCS 900 Ultro Conference System U.S. Version with express shipping all over Pakistan.   The Bosch CCS-CU Control Unit is the central power and control station for all CCS 900 Ultro Conference System contributor units, such as the chairman and delegate units. The control unit will supply power for up to 50 delegate / chairman units, and provide control for up to 150. The unit features a built in speaker and automated, programmable control over contributor units without the need for an operator. Its Digital Acoustic Feedback Suppression (DAFS) eliminates feedback howling and maintains clear, intelligible speech. Plenty of connections allow for interfacing within paging systems, amplifier systems, recording devices and more. The unit is feature rich, however its control section is straightforward and intuitive to operate in any conference setting.   Features: Discussion Control Without Operator The CU can be setup to operate standalone without the need for an operator. The following 5 modes can be chosen using a rotary control on the unit's top panel: • Open mode - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active • Open mode with auto-switch-off - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active. If the delegate does not speak for 30 seconds, microphones are automatically switched off • Override mode - delegates can override each other simply by activating their microphones. Only one microphone can be active at any one time. (Note: In override mode, delegates cannot override chairmen) • Chairman only mode - only chairmen can speak. Delegate microphones cannot be activated, even when a chairman is not speaking • Test mode - checks if system connections are correct. All microphone light rings and contribution unit LEDs light up to indicate that units are properly connected Supplies Power for up to 50 Contribution Units The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to connect 25 contribution units to each trunk output, with a maximum system cable length of 109.3 yards (100m). Provides Control for up to 150 Contribution Units Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150 contribution units. In this configuration a single CU acts as a master controller for the entire system. Built-in Monitor Loudspeaker The built-in monitor loudspeaker and headphone socket allow the conference to be monitored. Interfaces the System With External Equipment The following equipment can be interfaced to the CCS Ultro Discussion System through the CU: • External wired or wireless microphone - for guest speakers or audience participation. (Note: The external microphone is muted when the priority button on a chairman unit is pressed, and when the system is operating in 'chairman only' mode) • External PA system - for transmitting the proceedings to an audience in the same room or an adjacent room • Tape recorder - for external recording and playing back meetings and discussions • Audio equipment - for providing background music • Telephone coupler - to allow a remote delegate to participate via telephone• External audio processing - an insertion connector is provided Controls and Indicators (Top) • Mains on/off switch • Graphical display for status information (CCS‐CURD) • 5 soft buttons for configuration and control of thebuilt-in MP3 recorder (CCS‐CURD) • Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This control also determines the maximum level for the headphone outputs of the contribution units and the CU. • Microphone mode rotary switch, for setting the number of simultaneously active microphones, and selecting one of the four operation modes (plus test mode) • Power on LED Controls and Indicators (Back) • On/off switch for digital acoustic feedback suppression facility (CCS‐CUD, CCS‐CURD)• Microphone input gain adjustment • External recorder input gain adjustment • Insertion connector bypass switch   Specifications: Connections Top • 1x 0.14" (3.5mm) stereo headphone socket Back • 1x AC input • 2x 7-pole circular female connectors, trunk in/out loop through interconnection  • 1x 3-pole female XLR connector, microphone input (can be used as line input by included 50dB attenuator) • 1 x Cinch connector pair, line input/output  • 1 x Cinch connector pair, telephone input/output • 1 x Cinch connector pair, insertion input/output  • 2 x Cinch connector pairs (R/L channel), external recorder input/output • USB interface (CCS-CURD) Power Supply Mains voltage: 100 to 240 VAC ± 10% Current consumption: maximum 0.9A (100 VAC) to 0.3 A (240 VAC) DC supply to contribution units: 24V ± 1V (current limited) Volume mute (50dB att.) + 10 steps of 1.9dB Limiter 10dB above nominal level loudspeaker / headphone Gain Gain reduction due to number of open microphones (NOM): ÷ NOM ± 1 dB Total Harmonic Distortion Nominal input (85 dB SPL): Max. input (110 dB SPL): Sample Rate Recording: 32kHz Playback: 32, 44.1, 48kHz Bit Rate Recording: 64, 96, 128, 192, 256 KBit/sec Playback: any bitrate Mount Tabletop (portable or fixed) 19-inch rack flush mounting Material Top: polymer Bottom: painted metal Color Charcoal and Black Dimensions (HxWxD) 3.4 x 14.2 x 5.6" (84 x 361 x 143mm) Height of feet: 0.22" (5.5mm) Weight 3.3 lb (1.5kg)

Description: Details iShopping.pk brings you the best price for Bosch CCS-CUD Control Unit For CCS 900 Ultro Conference System U.S. Version with express shipping all over Pakistan.   The Bosch CCS-CUD Control Unit is the central power and control station for all CCS 900 Ultro Conference System contributor units, such as the chairman and delegate units. The control unit will supply power for up to 50 delegate / chairman units, and provide control for up to 150. The unit features a built in speaker and automated, programmable control over contributor units without the need for an operator. Its Digital Acoustic Feedback Suppression (DAFS) eliminates feedback howling and maintains clear, intelligible speech. Plenty of connections allow for interfacing within paging systems, amplifier systems, recording devices and more. The unit is feature rich, however its control section is straightforward and intuitive to operate in any conference setting.   Features: Digital Acoustic Feedback Suppression The digital acoustic feedback suppression facility automatically eliminates acoustic feedback (also known as 'howling' or 'Larsen effect'). This gives better speech intelligibility by allowing the speaker volume to be turned up as loud as required without any risk of feedback. Discussion Control Without Operator The CU can be setup to operate standalone without the need for an operator. The following 5 modes can be chosen using a rotary control on the unit's top panel: • Open mode - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active • Open mode with auto-switch-off - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active. If the delegate does not speak for 30 seconds, microphones are automatically switched off • Override mode - delegates can override each other simply by activating their microphones. Only one microphone can be active at any one time. (Note: In override mode, delegates cannot override chairmen) • Chairman only mode - only chairmen can speak. Delegate microphones cannot be activated, even when a chairman is not speaking • Test mode - checks if system connections are correct. All microphone light rings and contribution unit LEDs light up to indicate that units are properly connected Supplies Power for up to 50 Contribution Units The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to connect 25 contribution units to each trunk output, with a maximum system cable length of 109.3 yards (100m). Provides Control for up to 150 Contribution Units Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150 contribution units. In this configuration a single CU acts as a master controller for the entire system. Built-in Monitor Loudspeaker The built-in monitor loudspeaker and headphone socket allow the conference to be monitored. Interfaces the System With External Equipment The following equipment can be interfaced to the CCS Ultro Discussion System through the CU: • External wired or wireless microphone - for guest speakers or audience participation. (Note: The external microphone is muted when the priority button on a chairman unit is pressed, and when the system is operating in 'chairman only' mode) • External PA system - for transmitting the proceedings to an audience in the same room or an adjacent room • Tape recorder - for external recording and playing back meetings and discussions • Audio equipment - for providing background music • Telephone coupler - to allow a remote delegate to participate via telephone• External audio processing - an insertion connector is provided Controls and Indicators (Top) • Mains on/off switch • Graphical display for status information (CCS‐CURD) • 5 soft buttons for configuration and control of thebuilt-in MP3 recorder (CCS‐CURD) • Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This control also determines the maximum level for the headphone outputs of the contribution units and the CU. • Microphone mode rotary switch, for setting the number of simultaneously active microphones, and selecting one of the four operation modes (plus test mode) • Power on LED Controls and Indicators (Back) • On/off switch for digital acoustic feedback suppression facility (CCS‐CUD, CCS‐CURD)• Microphone input gain adjustment • External recorder input gain adjustment • Insertion connector bypass switch   Specifications: Connections Top • 1x 0.14" (3.5mm) stereo headphone socket Back • 1x AC input • 2x 7-pole circular female connectors, trunk in/out loop through interconnection  • 1x 3-pole female XLR connector, microphone input (can be used as line input by included 50dB attenuator) • 1 x Cinch connector pair, line input/output  • 1 x Cinch connector pair, telephone input/output • 1 x Cinch connector pair, insertion input/output  • 2 x Cinch connector pairs (R/L channel), external recorder input/output • USB interface (CCS-CURD) Power Supply Mains voltage: 100 to 240 VAC ± 10% Current consumption: maximum 0.9A (100 VAC) to 0.3 A (240 VAC) DC supply to contribution units: 24V ± 1V (current limited) Volume mute (50dB att.) + 10 steps of 1.9dB Limiter 10dB above nominal level loudspeaker / headphone Gain Gain reduction due to number of open microphones (NOM): ÷ NOM ± 1 dB Total Harmonic Distortion Nominal input (85 dB SPL): Max. input (110 dB SPL): Sample Rate Recording: 32kHz Playback: 32, 44.1, 48kHz Bit Rate Recording: 64, 96, 128, 192, 256 KBit/sec Playback: any bitrate Mount Tabletop (portable or fixed) 19-inch rack flush mounting Material Top: polymer Bottom: painted metal Color Charcoal and Black Dimensions (HxWxD) 3.4 x 14.2 x 5.6" (84 x 361 x 143mm) Height of feet: 0.22" (5.5mm) Weight 3.3 lb (1.5kg)

• Great Performance: 150+ Mbps real outdoor throughput and up to 15km+ range. Typical range is 2-4 miles from a LOS tower running airMAX sector antenna's and Rocket M2's.  • Next-Gen Antenna Design: 11dBi dual-polarity gain with optimized cross-polarity isolation in a compact form-factor. • Dual Ethernet Connectivity: A secondary Ethernet port with software enabled POE output for seamless IP Video integration. • Intelligent POE: Remote hardware reset circuitry of NanoStation M allows for device to be reset remotely from power supply location.  • 802.3af 48V Compliant - Easily becomes 802.3af 48V compliant through use of Ubiquiti Instant 802.3af adapter. The adapter sold separately (SKU#I8023AF-OD or I8023AF-ID)  • Easy Installation - Easily mountable to a pole/mast with mounting straps provided. In addition, the NanoStation M2 can be mounted and adjusted in any direction in a 90 degree angle through the use the NanoBracket. The NanoBracket is sold separately (SKU# MT-NANO U) Product Includes • One (1) NanoStation 2.4GHz • One (1) Power Injector: 110-240VAC 24VDC 0.5A US-style plug • Mount and mounting strap (NanoBracket sold separately, SKU# MT-NANO U) Featuring a compact indoor/outdoor design and an interface, it is so intuitive even the most technically challenged can instantly become experts. But don't be fooled--it is as powerful as it is simple. NanoStation packs some phenomenal performance with a revolutionary design combining a high-gain antenna system, advanced radio architecture and highly researched and developed firmware technology allowing throughput, stability and capacity performance rivaling even the highest-end Wi-Max networks The NanoStation M2 makes a perfect CPE device when pared with the Ubiquiti Rocket M2 and airMAX Sector or a Dish Antenna. We also recommend to upgrade your AirOS software to the latest version by visiting UBNT Software Downloads. This device can also be used for short LOS PtP links by placing one unit in Access Point WDS Mode and the other unit into Station WDS. NSM2 Specifications • Processor Specs: Atheros MIPS 24KC, 400MHz • Frequency: 2.4Ghz Channels 1-11 (Channels 12-14 available in INTL version, contact sales@balticnetworks.com for ordering information) • Wireless: 2Ghz Atheros, 27dBm Adjustable down to 8dBm.,AES Encryption • Memory Information: 32MB SDRAM, 8MB Flash • Networking Interface: 2 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface, PoE Passthrough • Mount and mounting strap (NanoBracket is optional, sold separately) • Operating Temperature: -30C to +80C • Power Method: Passive PoE • Power Consumption: 8 Watts • Power supply included: Power Injector 110-240VAC 24VDC.5A US-style plug • Size: 29.4 cm x 8 cm x 3cm, Weight:.4kg • Approvals: FCC Part 15.247, IC RS210, CE • RoHS Compliance: YES Technical Information and Support: NanoStation M2 Data Sheet NanoStation Quick Start Guide airMAX CPE Quick Start Guide

Bloody GH30 Rogue Mid Tower Gaming Case Price in Pakistan Details: • Airflow / Liquid Cooling Improving PC Performance,Take your game to the next level • 4mm Tempered Glass Panels The 4mm tempered glass panel on the side allows you to showcases gorgeous RGB lighting. • Aggressive Design Aggressively designed for the Bold. Energize your battle station. • 7 Expansion Slot Support 3 graphics cards, ample space, no pressure on graphics card installation. • Maximize Cooling Airflow This case uses superior airflow design that channels air from the front of the case through the top and rear. Improve cooling function by adding up to 7 cooling fans for more powerful internals. • Excellent Expandability Rogue supports motherboards up to ITX, ATX, M-ATX; mounts for up to 1 x HDD's and 2 x SSD's.(Note: We don't provide the 3.5" drive tray) • Handy I/O Ports One 3.0 USB, one 2.0 USB placed at the panel to grant direct access when needed.

UGreen 10 in 1 Type-C Multiple Ports Hub Price in Pakistan  10-in-1 USB C Hub Expansion This 10-in-1 USB-C Dock features a Gigabit Ethernet, a type C PD charging port, a 4K HDMI port, 3 USB 3.0 Ports, a SD/TF card reader, a 3.5mm Audio jack and a 1080P VGA port. All hub ports can be in use simultaneously, allowing you to connect a keyboard, mouse, USB driver, external Disk to MacBook Pro 4K UHD Visual Feast Mirror or extend your screen with USB C adapter HDM port and directly stream max 4K UHD 3840×2160 at 30Hz, Full HD 1080P video to external HDTV, monitor or projector for a cinema-like visual feast. When the HDMI and VGA output ports work simultaneously, the display will ONLY duplicate and NOT extend but the maximum resolution of both ports is 1080P Reliable Data Transfer 3 USB 3. 0 ports supports super faster data transfer up to 5Gbps, which is 10x faster than USB 2. 0 and allows you to transfer HD movies or files in just seconds. SD & TF slots support data transfer speeds up to 480Mbps (SD & TF cards can be read simultaneously) Fast Power Delivery & RJ45 Ethernet  100W power delivery charging port allows you to charge your computer, MacBook Pro or other Type-C devices while transferring data. USB C to RJ45 1000M Ethernet Port backwards compatible with 100Mbps/10Mbps RJ45 LAN. Gigabit Ethernet port ensures a more stable and faster wired network connection Universal Compatibility(Partial List) Compatible Type C PC/Tablet Apple MacBook Pro (2019/2018/2017/2016), MacBook (2016/2017/2018), iMac 2019/2017, iMac Pro, MacBook Air 2019/2018, Mac Mini, New MacBook with Thunderbolt 3, iPad Pro 2020/2019/2018 with IOS 13.0 and above (Ensure the file format of usb external storage device is EXFAT or FAT32.) Samsung Chromebook Pro, Chromebook Plus, Notebook 9 13?, Galaxy Book 12?, Galaxy Book 10.6, Galaxy Tab Pro S 12?, Samsung Tab S4 / S5e/ S6 Google Pixelbook, Chromebook Pixel Microsoft Surface Pro X, Surface Go, Surface Book 2, Surface Pro 7, Surface Laptop 3, Microsoft Lumia 950/950 XL DELL XPS 13, XPS 15, XPS12 9250, Precision 5510, Inspiron 15 7000, Latitude 7285 Lenovo Yoga 920, 910, 720, ThinkPad X1, Ideapad Air 12, Miix 630 HP Spectre 13, Spectre X360, ENVY 13, ENVY X360, HP EliteBook Folio G1 Huawei MateBook X Pro, MateBook X, Huawei MateBook E ASUS Chromebook Flip, ZenBook3, ASUS ZenBook Pro, Asus ZenBook Flip, ASUS Transformer 3 Pro T303UA Acer swift 7, Acer Chromebook, Xiaomi Mi Notebook Air 12.5/13.3, Mi Notebook Pro 15.6 “, and more Compatible USB C Cell Phones Samsung Galaxy Note 10 9, S10 S9 S9+, S8, S8 Plus, Note8, Oneplus 7 Pro, and more Huawei Mate 20, Mate 20 Pro, Mate 20 X, Mate 10, Mate 10 Pro, P30, P30 Pro, P20, P20 Pro, Honor View 20, View 10, Note 10 Package Content 1 x 10 in 1 USB C Hub UGREEN USB C Hub 10 in 1 Multi Port Type C Docking Station Expand your macbook with 4K HDMI, 1080P VGA, Gigabit Ethernet, 3 USB 3.0 ports, TF SD card reader, 100Wtype C PD charging port and a 3.5mm Audio jack. This USB Type C hub adapter provides with 3 USB 3.0 ports for your laptop, enhance the capability to connect more USB devices simultaneously, no need to plugging & unplugging repeatedly anymore; Simply Plug and Play, no software or drivers needed, offer you full safe using experience with built-in Over-current/Over-voltage/Reverse current protections; Before purchasing, please make sure your laptop/phone/PC supports DP ALT MODE. which means the USB c port on your device can support video output, data syncing, and charging functions before purchase.   Note: 1. We suggest just one HDD/SSD is connected at a time due to the power output limitations of some laptops. 2. If the wireless network is affected, please set your router from 2.4GHz to 5GHz. 3. HDMI and VGA ports can be used or connected at the same time. 4. USB C PD fast charging is only for laptops but not for phones. Phones only support normal charging. Universal Compatibility(Partial List) Compatible Type C PC/Tablet Apple MacBook Pro (2019/2018/2017/2016), MacBook (2016/2017/2018), iMac 2019/2017, iMac Pro, MacBook Air 2019/2018, Mac Mini, New MacBook with Thunderbolt 3, iPad Pro 2020/2019/2018 with IOS 13.0 and above (Ensure the file format of usb external storage device is EXFAT or FAT32.) Samsung Chromebook Pro, Chromebook Plus, Notebook 9 13?, Galaxy Book 12?, Galaxy Book 10.6, Galaxy Tab Pro S 12?, Samsung Tab S4 / S5e/ S6 Google Pixelbook, Chromebook Pixel Microsoft Surface Pro X, Surface Go, Surface Book 2, Surface Pro 7, Surface Laptop 3, Microsoft Lumia 950/950 XL DELL XPS 13, XPS 15, XPS12 9250, Precision 5510, Inspiron 15 7000, Latitude 7285 Lenovo Yoga 920, 910, 720, ThinkPad X1, Ideapad Air 12, Miix 630 HP Spectre 13, Spectre X360, ENVY 13, ENVY X360, HP EliteBook Folio G1 Huawei MateBook X Pro, MateBook X, Huawei MateBook E ASUS Chromebook Flip, ZenBook3, ASUS ZenBook Pro, Asus ZenBook Flip, ASUS Transformer 3 Pro T303UA Acer swift 7, Acer Chromebook, Xiaomi Mi Notebook Air 12.5/13.3, Mi Notebook Pro 15.6 “, and more   Compatible USB C Cell Phones Samsung Galaxy Note 10 9, S10 S9 S9+, S8, S8 Plus, Note8, Oneplus 7 Pro, and more Huawei Mate 20, Mate 20 Pro, Mate 20 X, Mate 10, Mate 10 Pro, P30, P30 Pro, P20, P20 Pro, Honor View 20, View 10, Note 10   4K UHD Visual Feast With 4K HDMI and 1080P VGA video outputs, directly stream max 4K UHD 3840×2160 at 30Hz, Full HD 1080P video to external HDTV. Give you vivid 3D effect video Sync. Effortless Data Transfer This USB Type C hub adds extra 3 USB 3.0 ports for your laptop, allowing to connect multiple USB peripherals. Support faster data transfer up to 5Gbps, 10X faster than USB 2.0. Fast and Stable Internet Access USB C to RJ45 1000M Ethernet Port backwards compatible with 100Mbps/10Mbps RJ45 LAN. Gigabit Ethernet port ensures a more stable and faster wired network connection. 100W Fast Power Delivery Support PD charging up to 100W, This multiport USB C adapter provides one Type-C pass through female port by which you could securely and quickly charge your Macbook or other USB-C devices. 3.5mm Audio Jack There is a 3.5mm Audio port for you to put in your wired headset, so that you can enjoy music without disturbing others. Compact & Effective SD/TF Card Adapter Allow to read 2 memory cards simultaneously at super speed 104MB/S and is widely compatible below cards. UGREEN USB C Hub 10 in 1

TP-Link Archer AX55 AX3000 Dual Band Gigabit Wi-Fi 6 Router OneMesh WPA3 Price in Pakistan Archer AX55 AX3000 Dual Band Gigabit Wi-Fi 6 Router Next-Gen Gigabit Wi-Fi 6 Speed—2402 Mbps on 5 GHz and 574 Mbps on 2.4 GHz band ensure smoother streaming and faster downloads. Connect More Devices—OFDMA technology increases capacity by 4 times to enable simultaneous transmission to more devices. Ultra-Low Latency—Enables more responsive gaming and video chatting. Expanded Wi-Fi Coverage—Four high-gain external antennas and Beamforming technology combine to extend strong, reliable Wi-Fi throughout your home. TP-Link HomeShield - Enhanced security defends against the latest cyber threats. Improved Battery Life—Target Wake Time helps your devices to communicate more while consuming less power. Compatible with Alexa—Control your router via voice commands and make your life smarter and easier with Amazon Alexa. The New Era home Connectivity AX3000 Dual-Band Gigabit Wi-Fi 6 Router Wi-Fi 6 Upgrades Everything The latest generation of Wi-Fi technology brings faster speeds, less lag, and higher capacity, enabling more simultaneous connections on your home network. Incredible Speed Drastically improved speeds enable streaming, fast downloading, and gaming—all at the same time. 5 GHz with 160 MHz channel support doubles the bandwidth, enabling 8K video without lag. More Responsive Experiences Less Loading Wheels Enjoy smooth gaming, video streaming, and live feed simultaneously. OFDMA makes your WiFi stronger by allowing multiple clients to share one band at the same time, which cuts latency and jittering. Powerful CPU and High Memory Connect More without Dropping Speed Behind the Wi-Fi 6 technology structure are the advanced Qualcomm chipset and high memory. Enjoy fast connections with minimal latency even under a heavy load of transmission. Every click for website links and online playback on your laptop and phone just responds quicker. Improved Cooling Design Consistent Full Output No heat-ups, no throttles. A larger heat sink and refined case design cool the WiFi 6 system and enable your network to stay at top speed in more versatile environments. WiFi Coverage Throughout Your Home 4 high-performance external antennas boost WiFi signals throughout your home. Beamforming technology detects devices and concentrates wireless signal strength towards them, especially for previously hard to reach outlets. USB 3.0 Ports Easily share files between connected devices by plugging into an external drive. You can even make it your personal cloud storage and access it from outside securely*. TP-Link OneMesh™Flexibly Create Whole Home WiFi with Archer AX55 Want to build a whole-home Wi-Fi? Archer AX55 supports OneMesh to form seamless whole-home coverage, preventing drops and lag when moving between signals. TP-Link HomeShield: Advanced Security for Your Everyday Devices With TP-Link HomeShield, enjoy advanced security features delivering a safe environment that protects your family and network's data and privacy. Home Network Scanner Real-time network scanner to detect potential threats and security issues. Parental Controls Manage time online and block inappropriate content keeping your family safe online. Quality of Service Assign your favourite devices to have the fastest connections for top performance. Upgrade to HomeShield Pro (Subscription fees apply) DDoS AttackPrevention IoT DeviceProtection Advanced ParentalControls including time Rewards 1-MonthFree Trial WPA3—New Level of Cyber Security The latest Wi-Fi security protocol, WPA3, brings new capabilities to improve cybersecurity in personal networks. More secure encryption in Wi-Fi password safety and enhanced protection against brute-force attacks combine to safeguard your home Wi-Fi. Easy Setup and Use Whether you prefer the intuitive Tether app or TP-Link’s powerful web interface, you can set up your Archer AX55 in minutes. The Tether App allows you to manage network settings from any Android or iOS device. Protect Your Children Block inappropriate content for your children, and customize a time range for better online habits. New Connection Notification You will be notified by your phone when new devices connect. Kick-off any suspicious connections and block them. It’s as simple as that. Easy Firmware Upgrade Tired of upgrading firmware? OTA updates enable easy firmware upgrades with a click in the management panel. To keep your security and functions always up-to-date, just turn on the auto-schedule. †Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput, wireless coverage and number of connected devices are not guaranteed and will vary as a result of network conditions, client limitations, and environmental factors, including building materials, obstacles, volume and density of traffic, and client location.‡Use of 802.11ax (Wi-Fi 6) and its features including OFDMA, HE160, and TWT requires clients to also support corresponding features. The 160 MHz bandwidth may be unavailable in the 5 GHz band in some regions/countries due to regulatory restrictions. Actual power reduction by Target Wake Time may vary as a result of network conditions, client limitations, and environmental factors.§The 802.11ax white paper defines standardized modifications to both the IEEE 802.11 physical layers (PHY) and the IEEE 802.11 Medium Access Control (MAC) layer as enabling at least one mode of operation capable of supporting the improvement of at least four times the average throughput per station (measured at the MAC data service access point) in a dense deployment scenario.?HomeShield includes the Free Basic Plan. Fees apply for the Pro Plan. Visit https://www.tp-link.com/homeshield for more information*Use of WPA3 requires clients to support WPA3. **This router may not support all the mandatory features as ratified in IEEE 802.11ax specification.***Further software upgrade for feature availability may be required.

Cisco Linksys SPA922 Single Line VoIP IP Phone - Imported Features: Dual-switched Ethernet ports, speakerphone, caller ID, call hold, and conferencing. 802.3af PoE, high-resolution graphical display, speakerphone, and a 2.5 mm headset port. Support for one line with two call appearances, as well as three-way conferencing, attended call transfer, and call hold. Easy station moves and shared line appearances across local and geographically dispersed locations. Standard encryption protocols to provide secure remote provisioning and unobtrusive in-service software upgrades. Detailed performance measurement and troubleshooting. For more detail Call us 03455181377 03454797559

DESCRIPTION Panasonic New KX-NS500X Digital Hybrid IP Exchange proposed by MSi (Minolta Systems International). .Main Unit: 6 Trunk Lines + 16 SLT Extensions + 2 Digital Extensions for Executive Sets. MSI Unit Price: - Rs:62,500/- MSI Delivery: - Free (in city) MSI warranty: - 180 days MSi Master Set: - Rs:13500/- MSi Key Features:- Multi Station/Cities Linking Option. Multi Types Phone Compatible Option. IP & SIP Phones Supportable. Suitable for Call Centers. Built in OGM Message Card. Built In Cli Function DISA Function. Conference Calling. Hold Music Change. Call Forwarding. DND Function. Code Creating. Call Pick Up. One Key Access Control. . . MSi Overview:- Panasonic NS500 New Smart Hybrid Digital IP PBX is a cost effective legacy and IP communication system for small and medium sized companies that can be flexibly configured and expanded according to your needs The NS500 has advanced features and starts from 6 analogue trunks and 18 extensions up to 288 extensions with an Expansion Unit The KX-NS500 is also a unified communication system which has rich IP features such as mobile linking integrated voice mail and e-mail instant messaging (chat) and presence information It can also use built-in applications such as a call center solution mobile solution and voice mail system to provide more efficient work and increased customer satisfaction. . . MINOLTA SYSTEMS INTERNATIONAL (Office Solutions & Communications) Land Mark Plaza, Zafar Ali Road, Gulberg-5, Lahore.

Description: Details iShopping.pk brings you the best price for Toa Electronics VoIP Paging Module Power Supply with express shipping all over Pakistan.   The SP-11N is a VoIP phone paging module supported SIP (Session Initiation Protocol) with Auto-answer function. It can be connected with IP network and directly registered as one SIP phone station on various management software of SIP server. It also has VOX and mute functions designed for use with TOA's 9000M2, 900, 700 and BG series amplifiers.   Specifications: General Product Type VoIP phone paging module Intended For Audio mixer Product Material Aluminum Width 1.4 in Depth 3.6 in Height 3.1 in Weight 3.03 oz Connections Connections LAN - RJ-45 Control output - 6 pin terminal block

Description: Details iShopping.pk brings you the best price for Asus TUF GT501 ATX Mid-Tower Gaming CPU Case  with express shipping all over Pakistan.     Features: • Designed to be noticed: Metal front panel with custom TUF Gaming spatter pattern, and 4mm-thick, smoked, tempered-glass side panel to showcase your build’s internals. • Mobile battle station: Ergonomic, woven-cotton carry handles enable easy and safe transport up to 30Kg. • Efficient cooling: Equipped with three 120mm Aura Sync RGB-illuminated fans and one 140mm rear PWM fan, plus up to seven fan-mounting points for targeted airflow. • Space reserved for both front- and top-mounted 360mm water-cooling radiators plus a 140mm radiator at the rear. • Perfect for TUF Gaming motherboards: Fan and cable placement optimized for TUF Gaming gear, and ready for perfect cooling control via our Fan Xpert 4 software.   Specifications:   Dimensions 251 x 545 x 552 mm (WxDxH) Case Size ATX Mid Tower Form Factor ATX/micro ATX/Mini ITX/EATX (12”x10.9”) Drive Bays 4 x Int x 2.5”/3.5” Combo Bay 3 x Int x 2.5” Bay System Fan Support Pre-installed Fans Front: 3x 120mm AURA RGB (1200RPM) Rear: 1 x 140 PWM Expansion Slots 7+2 (additional vertical) Weight N.W. 10.5 kg Color Black Front I/O Ports 2 x USB 3.1 Gen1 1 x Headphone 1 x Microphone

Description: Details iShopping.pk brings you the best price for Gamdias Talos E2 Elite RGB Tempered Glass Mid-Tower Gaming Case Black with express shipping all over Pakistan.   Details:   The TALOS E2 Elite mid-tower again features the trapezoidal tempered glass front panel and eye-catching trio of 120mm ARGB lighting fans. With the new side swinging magnetically closing tempered glass side panel to top any extravagant ARGB battle station.   Smooth and Uninterrupted With a trapezoidal tempered glass and three built-in 120mm ARGB fans to allow high air flow go through the aggressive angled slots.   One Press and Sync All Handy I/O port on the top of the case featuring a ARGB fans control button, allowing you to cycle through all the lighting effects by simply pressing a button. A 3-sec hold of the button will sync the fans to your RGB motherboard 5v 3-pin. A high-speed USB 3.0, two USB 2.0 ports, a HD audio jack and a power button can also be found on the I/O port.   Magnetic Dust Filter A magnetically held dust filter, located on top of the TALOS E2 Elite to minimize dust entering the case. With magnets holding the filter to the case, makes it easy to remove and clean the washable dust filter.   Out of the Ordinary The TALOS E2 Elite comes with a single side magnetic closing tempered glass swinging door. Not only showcasing all the components, also makes modding easier and more convenient.   Ample Accommodation The accommodation inside TALOS E2 Elite is able to support up to six 120mm fans. Mounting points for 280mm, 240mm radiators at the top and additional 360mm at front, 140mm or 120 mm radiator in the rear.   Elite Expansion The TALOS E2 Elite’s internal volume is 15% larger than it’s predecessor, capable of supporting high-end CPU coolers, VGA cards up to 340mm and PSU up to 180mm long. An additional 3 Slot Vertical VGA Slot is also now available.   Clean slate A clean designed side glass panel without the thumb screws getting in the way visually. A unique designed mechanism which allows the side glass panel to slide and clip right into the case. Therefor you are able to function the 4mm tinted tempered glass with ease, which displays your internal rig components.

GMMK THE WHITE ICE EDITION Introducing the all-new GMMK "White Ice" Edition. Give your battle station an icy-clean upgrade with this stunning new colourway. Featuring a matte silver body, all-white double-shot injection keycaps. “DO I RECOMMEND THIS KEYBOARD? YES! OUT OF ALL THE KEYBOARDS IN THIS PRICE RANGE, I WOULD PICK THE GMMK IF I COULD ONLY CHOOSE ONE.” -The Dredgen Project HIGH-END GAMING CRITIC