Mains

For Laptop battery Charging Perfect For House And Office Use 3 Pin Socket Supported 3 Pin Supply Voltage: 250V Current Flow Up to 20 A

Product Specifications:Style: 2 Pin Figure 8Voltage: 250VCurrent: 13Amp fuseLength: 1.2 metersCertification: BS/CECable core size: 2*0.75 mm²Material: PVC insulation MaterialConnectors: Figure 8 / IEC C7 Package Includes: 1x Figure 8 AC Power Cable

  Max Configurable Power (Watts) 600 Watts / 1.0kVA. Output Voltage Distortion. Less than 5 % Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz Sync to mains. Other Output Voltages. 220, 240. Topology. Line interactive. Waveform type. Transfer Time. 6 ms typical: 10 ms maximum

  Output rated power in W 1980 W Maximum configurable power in W 1980 W harmonic distortion Less than 5 % at full load output frequency 47...53 Hz for 50 Hz nominal sync to mains 57...63 Hz for 60 Hz nominal sync to mains UPS type Line interactive Wave type Sine wave nb of power socket outlets 8 IEC 320 C13 2 IEC Jumpers 1 IEC 320 C19 curve equation Efficiency curve fixed loss 0.0104 curve load maximum 100 %

Description: Details iShopping.pk brings you the best price for Bosch CCS-CU Control Unit For CCS 900 Ultro Conference System with express shipping all over Pakistan.   The Bosch CCS-CU Control Unit is the central power and control station for all CCS 900 Ultro Conference System contributor units, such as the chairman and delegate units. The control unit will supply power for up to 50 delegate / chairman units, and provide control for up to 150. The unit features a built in speaker and automated, programmable control over contributor units without the need for an operator. Its Digital Acoustic Feedback Suppression (DAFS) eliminates feedback howling and maintains clear, intelligible speech. Plenty of connections allow for interfacing within paging systems, amplifier systems, recording devices and more. The unit is feature rich, however its control section is straightforward and intuitive to operate in any conference setting.   Features: Discussion Control Without Operator The CU can be setup to operate standalone without the need for an operator. The following 5 modes can be chosen using a rotary control on the unit's top panel: • Open mode - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active • Open mode with auto-switch-off - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active. If the delegate does not speak for 30 seconds, microphones are automatically switched off • Override mode - delegates can override each other simply by activating their microphones. Only one microphone can be active at any one time. (Note: In override mode, delegates cannot override chairmen) • Chairman only mode - only chairmen can speak. Delegate microphones cannot be activated, even when a chairman is not speaking • Test mode - checks if system connections are correct. All microphone light rings and contribution unit LEDs light up to indicate that units are properly connected Supplies Power for up to 50 Contribution Units The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to connect 25 contribution units to each trunk output, with a maximum system cable length of 109.3 yards (100m). Provides Control for up to 150 Contribution Units Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150 contribution units. In this configuration a single CU acts as a master controller for the entire system. Built-in Monitor Loudspeaker The built-in monitor loudspeaker and headphone socket allow the conference to be monitored. Interfaces the System With External Equipment The following equipment can be interfaced to the CCS Ultro Discussion System through the CU: • External wired or wireless microphone - for guest speakers or audience participation. (Note: The external microphone is muted when the priority button on a chairman unit is pressed, and when the system is operating in 'chairman only' mode) • External PA system - for transmitting the proceedings to an audience in the same room or an adjacent room• Tape recorder - for external recording and playing back meetings and discussions • Audio equipment - for providing background music • Telephone coupler - to allow a remote delegate to participate via telephone• External audio processing - an insertion connector is provided Controls and Indicators (Top) • Mains on/off switch • Graphical display for status information (CCS‐CURD) • 5 soft buttons for configuration and control of thebuilt-in MP3 recorder (CCS‐CURD) • Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This control also determines the maximum level for the headphone outputs of the contribution units and the CU. • Microphone mode rotary switch, for setting the number of simultaneously active microphones, and selecting one of the four operation modes (plus test mode) • Power on LED Controls and Indicators (Back) • On/off switch for digital acoustic feedback suppression facility (CCS‐CUD, CCS‐CURD)• Microphone input gain adjustment • External recorder input gain adjustment• Insertion connector bypass switch   Specifications: Connections Top • 1x 0.14" (3.5mm) stereo headphone socket Back • 1x AC input • 2x 7-pole circular female connectors, trunk in/out loop through interconnection  • 1x 3-pole female XLR connector, microphone input (can be used as line input by included 50dB attenuator) • 1 x Cinch connector pair, line input/output  • 1 x Cinch connector pair, telephone input/output • 1 x Cinch connector pair, insertion input/output  • 2 x Cinch connector pairs (R/L channel), external recorder input/output • USB interface (CCS-CURD) Power Supply Mains voltage: 100 to 240 VAC ± 10% Current consumption: maximum 0.9A (100 VAC) to 0.3 A (240 VAC) DC supply to contribution units: 24V ± 1V (current limited) Volume mute (50dB att.) + 10 steps of 1.9dB Limiter 10dB above nominal level loudspeaker / headphone Gain Gain reduction due to number of open microphones (NOM): ÷ NOM ± 1 dB Total Harmonic Distortion Nominal input (85 dB SPL): Max. input (110 dB SPL): Sample Rate Recording: 32kHz Playback: 32, 44.1, 48kHz Bit Rate Recording: 64, 96, 128, 192, 256 KBit/sec Playback: any bitrate Mount Tabletop (portable or fixed) 19-inch rack flush mounting Material Top: polymer Bottom: painted metal Color Charcoal and Black Dimensions (HxWxD) 3.4 x 14.2 x 5.6" (84 x 361 x 143mm) Height of feet: 0.22" (5.5mm) Weight 3.3 lb (1.5kg)

Description: Details iShopping.pk brings you the best price for Bosch CCS-CUD Control Unit For CCS 900 Ultro Conference System with express shipping all over Pakistan.   The Bosch CCS-CUD Control Unit is the central power and control station for all CCS 900 Ultro Conference System contributor units, such as the chairman and delegate units. The control unit will supply power for up to 50 delegate / chairman units, and provide control for up to 150. The unit features a built in speaker and automated, programmable control over contributor units without the need for an operator. Its Digital Acoustic Feedback Suppression (DAFS) eliminates feedback howling and maintains clear, intelligible speech. Plenty of connections allow for interfacing within paging systems, amplifier systems, recording devices and more. The unit is feature rich, however its control section is straightforward and intuitive to operate in any conference setting.   Features: Digital Acoustic Feedback Suppression The digital acoustic feedback suppression facility automatically eliminates acoustic feedback (also known as 'howling' or 'Larsen effect'). This gives better speech intelligibility by allowing the speaker volume to be turned up as loud as required without any risk of feedback. Discussion Control Without Operator The CU can be setup to operate standalone without the need for an operator. The following 5 modes can be chosen using a rotary control on the unit's top panel: • Open mode - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active • Open mode with auto-switch-off - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active. If the delegate does not speak for 30 seconds, microphones are automatically switched off • Override mode - delegates can override each other simply by activating their microphones. Only one microphone can be active at any one time. (Note: In override mode, delegates cannot override chairmen) • Chairman only mode - only chairmen can speak. Delegate microphones cannot be activated, even when a chairman is not speaking • Test mode - checks if system connections are correct. All microphone light rings and contribution unit LEDs light up to indicate that units are properly connected Supplies Power for up to 50 Contribution Units The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to connect 25 contribution units to each trunk output, with a maximum system cable length of 109.3 yards (100m). Provides Control for up to 150 Contribution Units Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150 contribution units. In this configuration a single CU acts as a master controller for the entire system. Built-in Monitor Loudspeaker The built-in monitor loudspeaker and headphone socket allow the conference to be monitored. Interfaces the System With External Equipment The following equipment can be interfaced to the CCS Ultro Discussion System through the CU: • External wired or wireless microphone - for guest speakers or audience participation. (Note: The external microphone is muted when the priority button on a chairman unit is pressed, and when the system is operating in 'chairman only' mode) • External PA system - for transmitting the proceedings to an audience in the same room or an adjacent room• Tape recorder - for external recording and playing back meetings and discussions • Audio equipment - for providing background music • Telephone coupler - to allow a remote delegate to participate via telephone• External audio processing - an insertion connector is provided Controls and Indicators (Top) • Mains on/off switch • Graphical display for status information (CCS‐CURD) • 5 soft buttons for configuration and control of thebuilt-in MP3 recorder (CCS‐CURD) • Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This control also determines the maximum level for the headphone outputs of the contribution units and the CU. • Microphone mode rotary switch, for setting the number of simultaneously active microphones, and selecting one of the four operation modes (plus test mode) • Power on LED Controls and Indicators (Back) • On/off switch for digital acoustic feedback suppression facility (CCS‐CUD, CCS‐CURD)• Microphone input gain adjustment • External recorder input gain adjustment• Insertion connector bypass switch   Specifications: Connections Top • 1x 0.14" (3.5mm) stereo headphone socket Back • 1x AC input • 2x 7-pole circular female connectors, trunk in/out loop through interconnection  • 1x 3-pole female XLR connector, microphone input (can be used as line input by included 50dB attenuator) • 1 x Cinch connector pair, line input/output  • 1 x Cinch connector pair, telephone input/output • 1 x Cinch connector pair, insertion input/output  • 2 x Cinch connector pairs (R/L channel), external recorder input/output • USB interface (CCS-CURD) Power Supply Mains voltage: 100 to 240 VAC ± 10% Current consumption: maximum 0.9A (100 VAC) to 0.3 A (240 VAC) DC supply to contribution units: 24V ± 1V (current limited) Volume mute (50dB att.) + 10 steps of 1.9dB Limiter 10dB above nominal level loudspeaker / headphone Gain Gain reduction due to number of open microphones (NOM): ÷ NOM ± 1 dB Total Harmonic Distortion Nominal input (85 dB SPL): Max. input (110 dB SPL): Sample Rate Recording: 32kHz Playback: 32, 44.1, 48kHz Bit Rate Recording: 64, 96, 128, 192, 256 KBit/sec Playback: any bitrate Mount Tabletop (portable or fixed) 19-inch rack flush mounting Material Top: polymer Bottom: painted metal Color Charcoal and Black Dimensions (HxWxD) 3.4 x 14.2 x 5.6" (84 x 361 x 143mm) Height of feet: 0.22" (5.5mm) Weight 3.3 lb (1.5kg)

Description: Details iShopping.pk brings you the best price for Bosch CCS-CU Control Unit For CCS 900 Ultro Conference System U.S. Version with express shipping all over Pakistan.   The Bosch CCS-CU Control Unit is the central power and control station for all CCS 900 Ultro Conference System contributor units, such as the chairman and delegate units. The control unit will supply power for up to 50 delegate / chairman units, and provide control for up to 150. The unit features a built in speaker and automated, programmable control over contributor units without the need for an operator. Its Digital Acoustic Feedback Suppression (DAFS) eliminates feedback howling and maintains clear, intelligible speech. Plenty of connections allow for interfacing within paging systems, amplifier systems, recording devices and more. The unit is feature rich, however its control section is straightforward and intuitive to operate in any conference setting.   Features: Discussion Control Without Operator The CU can be setup to operate standalone without the need for an operator. The following 5 modes can be chosen using a rotary control on the unit's top panel: • Open mode - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active • Open mode with auto-switch-off - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active. If the delegate does not speak for 30 seconds, microphones are automatically switched off • Override mode - delegates can override each other simply by activating their microphones. Only one microphone can be active at any one time. (Note: In override mode, delegates cannot override chairmen) • Chairman only mode - only chairmen can speak. Delegate microphones cannot be activated, even when a chairman is not speaking • Test mode - checks if system connections are correct. All microphone light rings and contribution unit LEDs light up to indicate that units are properly connected Supplies Power for up to 50 Contribution Units The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to connect 25 contribution units to each trunk output, with a maximum system cable length of 109.3 yards (100m). Provides Control for up to 150 Contribution Units Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150 contribution units. In this configuration a single CU acts as a master controller for the entire system. Built-in Monitor Loudspeaker The built-in monitor loudspeaker and headphone socket allow the conference to be monitored. Interfaces the System With External Equipment The following equipment can be interfaced to the CCS Ultro Discussion System through the CU: • External wired or wireless microphone - for guest speakers or audience participation. (Note: The external microphone is muted when the priority button on a chairman unit is pressed, and when the system is operating in 'chairman only' mode) • External PA system - for transmitting the proceedings to an audience in the same room or an adjacent room • Tape recorder - for external recording and playing back meetings and discussions • Audio equipment - for providing background music • Telephone coupler - to allow a remote delegate to participate via telephone• External audio processing - an insertion connector is provided Controls and Indicators (Top) • Mains on/off switch • Graphical display for status information (CCS‐CURD) • 5 soft buttons for configuration and control of thebuilt-in MP3 recorder (CCS‐CURD) • Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This control also determines the maximum level for the headphone outputs of the contribution units and the CU. • Microphone mode rotary switch, for setting the number of simultaneously active microphones, and selecting one of the four operation modes (plus test mode) • Power on LED Controls and Indicators (Back) • On/off switch for digital acoustic feedback suppression facility (CCS‐CUD, CCS‐CURD)• Microphone input gain adjustment • External recorder input gain adjustment • Insertion connector bypass switch   Specifications: Connections Top • 1x 0.14" (3.5mm) stereo headphone socket Back • 1x AC input • 2x 7-pole circular female connectors, trunk in/out loop through interconnection  • 1x 3-pole female XLR connector, microphone input (can be used as line input by included 50dB attenuator) • 1 x Cinch connector pair, line input/output  • 1 x Cinch connector pair, telephone input/output • 1 x Cinch connector pair, insertion input/output  • 2 x Cinch connector pairs (R/L channel), external recorder input/output • USB interface (CCS-CURD) Power Supply Mains voltage: 100 to 240 VAC ± 10% Current consumption: maximum 0.9A (100 VAC) to 0.3 A (240 VAC) DC supply to contribution units: 24V ± 1V (current limited) Volume mute (50dB att.) + 10 steps of 1.9dB Limiter 10dB above nominal level loudspeaker / headphone Gain Gain reduction due to number of open microphones (NOM): ÷ NOM ± 1 dB Total Harmonic Distortion Nominal input (85 dB SPL): Max. input (110 dB SPL): Sample Rate Recording: 32kHz Playback: 32, 44.1, 48kHz Bit Rate Recording: 64, 96, 128, 192, 256 KBit/sec Playback: any bitrate Mount Tabletop (portable or fixed) 19-inch rack flush mounting Material Top: polymer Bottom: painted metal Color Charcoal and Black Dimensions (HxWxD) 3.4 x 14.2 x 5.6" (84 x 361 x 143mm) Height of feet: 0.22" (5.5mm) Weight 3.3 lb (1.5kg)

Description: Details iShopping.pk brings you the best price for Bosch CCS-CUD Control Unit For CCS 900 Ultro Conference System U.S. Version with express shipping all over Pakistan.   The Bosch CCS-CUD Control Unit is the central power and control station for all CCS 900 Ultro Conference System contributor units, such as the chairman and delegate units. The control unit will supply power for up to 50 delegate / chairman units, and provide control for up to 150. The unit features a built in speaker and automated, programmable control over contributor units without the need for an operator. Its Digital Acoustic Feedback Suppression (DAFS) eliminates feedback howling and maintains clear, intelligible speech. Plenty of connections allow for interfacing within paging systems, amplifier systems, recording devices and more. The unit is feature rich, however its control section is straightforward and intuitive to operate in any conference setting.   Features: Digital Acoustic Feedback Suppression The digital acoustic feedback suppression facility automatically eliminates acoustic feedback (also known as 'howling' or 'Larsen effect'). This gives better speech intelligibility by allowing the speaker volume to be turned up as loud as required without any risk of feedback. Discussion Control Without Operator The CU can be setup to operate standalone without the need for an operator. The following 5 modes can be chosen using a rotary control on the unit's top panel: • Open mode - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active • Open mode with auto-switch-off - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active. If the delegate does not speak for 30 seconds, microphones are automatically switched off • Override mode - delegates can override each other simply by activating their microphones. Only one microphone can be active at any one time. (Note: In override mode, delegates cannot override chairmen) • Chairman only mode - only chairmen can speak. Delegate microphones cannot be activated, even when a chairman is not speaking • Test mode - checks if system connections are correct. All microphone light rings and contribution unit LEDs light up to indicate that units are properly connected Supplies Power for up to 50 Contribution Units The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to connect 25 contribution units to each trunk output, with a maximum system cable length of 109.3 yards (100m). Provides Control for up to 150 Contribution Units Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150 contribution units. In this configuration a single CU acts as a master controller for the entire system. Built-in Monitor Loudspeaker The built-in monitor loudspeaker and headphone socket allow the conference to be monitored. Interfaces the System With External Equipment The following equipment can be interfaced to the CCS Ultro Discussion System through the CU: • External wired or wireless microphone - for guest speakers or audience participation. (Note: The external microphone is muted when the priority button on a chairman unit is pressed, and when the system is operating in 'chairman only' mode) • External PA system - for transmitting the proceedings to an audience in the same room or an adjacent room • Tape recorder - for external recording and playing back meetings and discussions • Audio equipment - for providing background music • Telephone coupler - to allow a remote delegate to participate via telephone• External audio processing - an insertion connector is provided Controls and Indicators (Top) • Mains on/off switch • Graphical display for status information (CCS‐CURD) • 5 soft buttons for configuration and control of thebuilt-in MP3 recorder (CCS‐CURD) • Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This control also determines the maximum level for the headphone outputs of the contribution units and the CU. • Microphone mode rotary switch, for setting the number of simultaneously active microphones, and selecting one of the four operation modes (plus test mode) • Power on LED Controls and Indicators (Back) • On/off switch for digital acoustic feedback suppression facility (CCS‐CUD, CCS‐CURD)• Microphone input gain adjustment • External recorder input gain adjustment • Insertion connector bypass switch   Specifications: Connections Top • 1x 0.14" (3.5mm) stereo headphone socket Back • 1x AC input • 2x 7-pole circular female connectors, trunk in/out loop through interconnection  • 1x 3-pole female XLR connector, microphone input (can be used as line input by included 50dB attenuator) • 1 x Cinch connector pair, line input/output  • 1 x Cinch connector pair, telephone input/output • 1 x Cinch connector pair, insertion input/output  • 2 x Cinch connector pairs (R/L channel), external recorder input/output • USB interface (CCS-CURD) Power Supply Mains voltage: 100 to 240 VAC ± 10% Current consumption: maximum 0.9A (100 VAC) to 0.3 A (240 VAC) DC supply to contribution units: 24V ± 1V (current limited) Volume mute (50dB att.) + 10 steps of 1.9dB Limiter 10dB above nominal level loudspeaker / headphone Gain Gain reduction due to number of open microphones (NOM): ÷ NOM ± 1 dB Total Harmonic Distortion Nominal input (85 dB SPL): Max. input (110 dB SPL): Sample Rate Recording: 32kHz Playback: 32, 44.1, 48kHz Bit Rate Recording: 64, 96, 128, 192, 256 KBit/sec Playback: any bitrate Mount Tabletop (portable or fixed) 19-inch rack flush mounting Material Top: polymer Bottom: painted metal Color Charcoal and Black Dimensions (HxWxD) 3.4 x 14.2 x 5.6" (84 x 361 x 143mm) Height of feet: 0.22" (5.5mm) Weight 3.3 lb (1.5kg)

Axpert Series KS and MKS sine wave hybrid inverters with built-in PWM charge contorller Pure sine wave inverter Selectable input voltage range for home appliances and personal computers Selectable charging current based on applications Configurable AC/Solar input priority via LCD setting Compatible to mains voltage or generator power Parallel operation with up to 6 units only available for 4KVA/5KVA Auto restart while AC is recovering Overload and short circuit protection Smart battery charger design for optimized battery performance Cold start function Optional Remote Control Panel available

ALL PAKISTAN Distributor of UPS/Inverter, SOLAR INVERTER/UPS Dry/Acid Batteries, SOLAR PANEL SOLAR MODELS:(REC/APOLLO/HOMAGE/NS) Main Features Pure sine wave inverter Selectable input voltage range for home appliances and personal computers Selectable charging current based on applications Configurable AC/Solar input priority via LCD setting Compatible to mains voltage or generator power Auto restart while AC is recovering Modified Sine wave Inverter Charger UPS for Home and Office Chopper Based Technology Who Provides Long Time Backup for Home and Offices. Products: ModelS: C 1200 Capacity: 1200va, 720watts (Five (5) Fans and Five (5) Tube-light or Ten (10) Saver.) PF (Power Factor)=0.6 12Vdc Display: LCD +LED Display. C 2400 Capacity: 2400va, 1440Watts (Ten (10) Fans and Ten (10) Tube-lights or (20) Savers. PF (Power Factor) =0.6 24Vdc Display: LCD + LED Display. Charging: 10 & 20 Amp Selectable Features of C 1200 & C 2400. 1) Reverse Polarity Protection System. 2) 10-20Amp Dual Charging Option. 3) LED LCD Indicators. 4) Double Layer PCBA with Latest Controller Card Technology. 5) Made Using Advanced Designed PCBA Technology Used in Special Missions Warranty: 1 Year Complete (Parts and Repairing). ALLPAKISTAN SERVIC CENTRES Back-up Time Duration: All Back-up Time Duration, Depends on Battery Capacity and Charging HIDAYAT ULLAH KHAN SHOP # 2,3 KAMRAN CENTER ZARAJ PLAZA ,OPP: MILITRY ACCOUNT OFFICE SADDAR RAWALPINDI 051-5565020/03119601343 IMRAN SAEED SHOP # 7 ALAM PLAZA ,DAV COLLEGE ROAD RAWALPINDI 0515762000,0311-0085866

  Output Power Capacity 1400 Watts / 2000 VA Max Configurable Power 1400 Watts / 2000 VA Nominal Output Voltage 230V Output Voltage Note Configurable for 220: 230 or 240 nominal output voltage Output Voltage Distortion Less than 3% Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz user adjustable +/- 0.1 Other Output Voltages 220, 240 Crest Factor 3: 1 Waveform Type Sine wave Output Connections (6) IEC 320 C13 (2) IEC Jumpers Bypass Built-in Bypass

  Technical Specifications Max Configurable Power (Watts) 4.2kWatts / 6.0kVA. Output Voltage Note. Configurable for 220: 230 or 240 nominal output voltage. Output Voltage Distortion. Less than 3 % Output Frequency (sync to mains)... Other Output Voltages.... Load Crest Factor.... Topology.... Waveform type.

Description: Details iShopping.pk brings you the best price for Optoma Projector 3800 Lumens Brightness SVGA Black (S343e) with express shipping all over Pakistan   Bright projection Project bright vibrant presentations effortlessly any time of day. Designed for meeting rooms and classrooms, the S343e boasts amazing colour, long lamp life and energy-saving features to provide you with a low overall cost of ownership. This projector is easy to connect to with multiple inputs, a built-in speaker and USB Power. Perfect for connecting HDMI dongles such as the Optoma HDCast Pro and the Google Chromecast or a laptop, PC or Blu-ray player for clear projected images with sound. Portable and lightweight projector can be installed or taken on the move for off-site meetings with the optional carry bag (sold separately).   Features • Bright SVGA projector – 3800 ANSI lumens • Easy connectivity – HDMI, VGA, USB Power • Clear, powerful audio - 10W speaker • Lightweight and portable   Amazing colours Give powerful presentations and educational lessons with stunning colours. Optoma projectors provide reliable colour performance suitable for any content and environment. From accurate sRGB colours for lifelike images to vibrant punchy presentations. We have a display mode to specific meet your needs. Perfect for a range of graphic and video presentations.   Superior contrast Add more depth to your image with a high contrast projector. Compared to competing technology, Optoma DLP projectors provide you with brighter whites and ultra-rich blacks, images come alive and text appears crisp and clear - ideal for business and education applications.   Full 3D Optoma projectors can display true 3D content from almost any 3D source, including 3D Blu-ray players, 3D broadcasting and the latest generation games consoles.   Integrated speaker A powerful built-in speaker provides exceptional sound quality and an easy setup without the need for costly external speakers.   Eco+ Eco+ technology brings together high contrast, improved lamp life and energy saving features that are easy to use while reducing power consumption.   Energy saving Using the specially designed lamp modes, you can reduce the power consumption by up to 70%. Each mode also has a positive effect on the lamp life, while lowering the total cost of ownership and reducing maintenance.   Quick resume This feature allows the projector to be instantly powered on again, if it is accidentally switched off.   Eco AV mute Stay in control of your presentation with Eco AV mute. Direct your audience's attention away from the screen by blanking the image when no longer needed. This also reduces the power consumption by up to 70%, further prolonging the life of your lamp.   Direct power on The projector will start up instantly when power is supplied to the unit. This eliminates the need to manually turn on the projector via the remote control or the keypad, ideal for use in rooms with a “master” power switch.   Direct power off Power off your projector immediately or directly at the mains. This means you don’t have to wait for the projector to cool down before turning it off.   Auto power off There may be instances when the projector is left running when not in use. To help save energy, the "auto power off" feature automatically turns off the projector after a set period of time if it is not being used   Specifications:   Display/Image Display technology DLP Resolution SVGA (800x600) Brightness 3,800 lumens Contrast ratio 22,000:1 Native aspect ratio 4:03 Aspect ratio – compatible 16:09 Keystone correction – vertical 40 Horizontal scan rate 15.38 ~ 91.15Khz Vertical scan rate 50 ~ 85(120 for 3D)Hz Uniformity 75% Screen size 0.71m - 7.73m (27.78in - 304.4in)(Diagonal) Lamp info Light source Lamp Lamp watts 203 Lamp life (hours) 6000 (Bright), 12000 (Dynamic), 10000 (Eco), 15000 (Eco+) Optical Throw ratio 1.94:1 - 2.16:1 Projection distance (m) 1m - 12m Zoom 1.1 Zoom type Manual Focal length (mm) 21.85 ~ 24 Native offset 115% Connectivity Connections Inputs  1 x HDMI 1.4a 3D support, 1 x VGA (YPbPr/RGB), 1 x Composite video, 1 x Audio 3.5mm Outputs  1 x VGA, 1 x Audio 3.5mm, 1 x USB-A power 1A Control  1 x RS232 General Noise level (typical) 27dB PC compatibility FHD, UXGA, SXGA, WXGA, HD, XGA, SVGA, VGA, Mac 2D compatibility NTSC M/J, 3.58MHz, 4.43MHz PAL B/D/G/H/I/M/N, 4,43MHz SECAM B/D/G/K/K1/L, 4.25/4.4MHz 480i/p, 576i/p, 720p(50/60Hz), 1080i(50/60Hz), 1080p(50/60Hz) 3D 3D ready Security Security bar, Kensington Lock, Password protected interface OSD / display languages 25 languages: Arabic, Czech, Danish, Dutch, English, Farsi, Finnish, French, German, Greek, Hungarian, Indonesian, Italian, Japanese, Norwegian, Polish, Portuguese, Romanian, Russian, Chinese (simplified), Spanish, Swedish, Chinese (traditional), Turkish, Vietnamese Operating conditions 5°C ~ 40°C, Max. Humidity 85%, Max. Altitude 3000m Remote control Card style Speaker count 1 Watts per speaker 10W In the box AC power cord Remote control Battery Basic user manual Power Power supply 100 ~ 240V, 50 ~ 60Hz Power consumption (standby) 0.5W Power consumption (min) 187W Power consumption (max) 225W Weight and dimensions Net weight 3kg Dimensions (W x D x H) (mm) 316 x 244 x 108      

Description: Details iShopping.pk brings you the best price for Bosch Digital Discussion For Control Unit (CCSD-CU) with express shipping all over Pakistan.   The Bosch CCSD-CU is the basic control unit for the Bosch CCS-1000D digital conference system. This control unit powers the discussion microphones (up to 80 in total), controls cameras (CCTV software included) and interfaces with external equipment such as a public address system. The front panel provides the neccessary controls but the system can also be controlled via a laptop or tablet. This includes the ability to activate or deactivate participant microphones, or changing the status of paticipants from 'waiting' to 'speaking'. Up to 6 HD cameras can be connected and controlled via the integral software, in order to relay the image of the person speaking onto a large screen.   Features: • Plug-and-play functionality for quick and easy connection of up to 80 Discussion Devices • Intuitive web browser control for advanced configuration and control   Specifications: Mains voltage 100 to 240 VAC ± 10% Current consumption Maximum 0.6 A (100 VAC) to 0.2 A (240 VAC) DC supply to Discussion Devices 24 V ± 1 V (current limited) Number of Discussion Devices per Control Unit Max. 40 devices per trunk connector Discussion Device loudspeakers volume control 15 steps of 1.5 dB (starting from -10.5 dB) Limit threshold level to unit 12 dB above nominal level Gain reduction due to number of open microphones (NOM) 1/SQRT (NOM) Sample rate 44.1 kHz Nominal input (85 dB SPL) Max. input (110 dB SPL) XLR nominal microphone input -56 dBV XLR maximum microphone input -26 dBV RCA nominal input -24 dBV (+/- 6 dB) RCA maximum input +6 dBV S/N > 94 dBA Frequency response 30 Hz to 20 kHz RCA nominal output -24 dBV (+6/- 24 dB) RCA maximum output +6 dBV S/N > 102 dBA Frequency response 30 Hz to 20 kHz Recording/ Playback (bit rate) 64, 96, 128, 256 Kbit/sec Recording/ Playback (sample frequency) 44.1 kHz Nominal output 72 dB SPL Frequency response 200 Hz to 12.5 kHz Gain range mute -10.5 to +12 SanDisk USB memory stick Formatted with FAT32 file system.Maximum size: 128 GB. Bite rate Internal memory hours, USB memory stick hours 16 GB 32 GB, 64 GB, 128 GB 64 8 hrs, 500, 1000, 2000, 4000 96 5 hrs, 350, 700, 1400, 2800 128 4 hrs, 250, 500, 1000, 2000 256 * 2 hrs, 125, 250, 500, 1000 Dimensions including feet (H x W x D) 45 x 440 x 200 mm(1.8 x 17.3 x 7.9 in)19” wide, 1 RU high Height of feet 5.5 mm (0.2 in) Mounting Tabletop19-inch rack Weight (CCSD-CU) Approx. 3.2 kg (7.1 lb) Weight (CCSD-CURD) Approx. 3.4 kg (7.5 lb) Material (top) Painted metal Material (base) Painted metal Color (top) Traffic black (RAL 9017) matt-gloss Color (base) Traffic black (RAL 9017) matt-gloss Rim Pearl light grey (RAL 9022) matt-gloss Operating temperature 5 ºC to +45 ºC (+41 ºF to +113 ºF) Storage temperature -40 ºC to +70 ºC (-40 ºF to +158 ºF) Relative humidity 5% to 98% non-condensing

Description: Details iShopping.pk brings you the best price for Toa Electronics Central Control Mixer Unit (TS-770) with express shipping all over Pakistan.   The Toa TS-770 Central Control Unit is designed for use with the Toa TS-770 conference system. The TS-770 is the control unit for the TS-771 chairman station, TS-772 delegate station and TS-775 remote delegate interface. Up to 70 stations can be connected to one TS-770, and up to three TS-770 units can be chained for control of up to 210 stations. The compact, intuitive TS-770 provides a host of features that include microphone-off position switches that automatically switch off microphones after 20 or 40 seconds of silence. Three limiter settings adjust the level threshold and avoid distortion caused by loud talkers. The front panel features level control for microphone and line level signal and two jacks provide connections for an auxiliary microphone and line level device.   Features: Control of Up to 70 Stations Up to 70 stations can be connected to one TS-770, and up to three TS-770 units can be chained for control of up to 210 stations. Automatic Microphone-Off Function The compact, intuitive TS-770 provides a host of features that include microphone-off position switches that automatically switch off microphones after 20 or 40 seconds of silence. Three Position Limiter Three limiter settings adjust the level threshold and avoid distortion caused by loud talkers. Auxiliary Inputs The front panel features level control for microphone and line level signal and two jacks provide connections for an auxiliary microphone and line level device.   Specifications: Inputs Line - 8-pin Connector x2  EXT 1 / EXT 2 - RCA Phono x2 Equalizer In - 1/4" Phone  Aux Mic - 1/4" Phone Aux Line - 1/4" Phone Outputs EXT 1 / EXT 2 - RCA Phono x2  Rec Out - Stereo 1/4" Phone & 1/8" Mini Multi-Pin I/O Connectors No Frequency Response Not Specified By Manufacturer Signal-to-Noise Ratio Not Specified By Manufacturer Distortion Not Specified By Manufacturer Power Requirements AC Mains, 50/60Hz Power Consumption 60W Dimensions (WxHxD) 8.27 x 4.22 x 12.44" (210 x 107.1 x 316mm) Weight 8.82 lb (4 kg)

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 128V Audio DSP Mixer with express shipping all over Pakistan.   The CONVERGE Pro 2 128V Audio DSP Mixer from ClearOne is a complete conferencing solution with 12 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in VoIP interface for 2 lines. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection. The mixer comes with built-in VoIP for VoIP conferencing. The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.   Features: Architecture • 12 mic/line inputs with AEC •  Built-in VoIP for 2 lines •  Built-in USB for PC-based conferencing Scalable Connectivity •  Standalone and daisy-chained system •  Stack up units up to 96 mic/line inputs •  Expansion bus C-Link with 64 channels •  P-Link bus to connect 6 peripherals Configuration & Management •  CONSOLE software •  Auto-discovery of devices •  Matrix View for entire system •  FlowView for visualized audio signal paths •  System monitoring and troubleshooting Audio Signal Processing •  Acoustic Echo Cancellation processing •  Distributed Echo Cancellation on every mic input •  Noise cancellation with Adaptive-Ambience •  Acoustic Intelligence with faster convergence •  DARE feedback elimination •  Microphone gating Flexible Control Options •  Dialer app for Windows, Mac, iOS, and Android •  Tabletop controller with a touch panel •  Wall controller with buttons •  Web-based controller Supports 3rd-party control modules   Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) VoIP Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation Audio: 5 lines (2 default + 3 lines through license), each line supporting 1+5 calls Sample Rate: 24 kHz Sample Bit Depth: 24-bit Codec: G.711 uLaw, G.711 ALaw, G.722 Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: Proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 48T Audio DSP Mixer with express shipping all over Pakistan.     The CONVERGE Pro 2 48T Audio DSP Mixer from ClearOne is a complete conferencing solution with 4 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in Telco interface for teleconferencing. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection.   The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.     Features: Architecture • 4 mic/line inputs with AEC •  Built-in Telco with ClearEffect processing •  Built-in USB for PC-based conferencing Scalable Connectivity •  Standalone and daisy-chained system •  Stack up units up to 96 mic/line inputs •  Expansion bus C-Link with 64 channels •  P-Link bus to connect 6 peripherals Configuration & Management •  CONSOLE software •  Auto-discovery of devices •  Matrix View for entire system •  FlowView for visualized audio signal paths •  System monitoring and troubleshooting Audio Signal Processing •  Acoustic Echo Cancellation processing •  Distributed Echo Cancellation on every mic input •  Noise cancellation with Adaptive-Ambience •  Acoustic Intelligence with faster convergence •  DARE feedback elimination •  Microphone gating Flexible Control Options •  Dialer app for Windows, Mac, iOS, and Android •  Tabletop controller with a touch panel •  Wall controller with buttons •  Web-based controller •  Supports 3rd-party control modules     Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Amplifier Output Speaker Output Port: Dual binding posts Audio: 2 x Channel Output Power: Maximum 10 W, 8 Ohms load Frequency Response: 20 Hz to 22 kHz @ +10 dBu, +/- 0.5 dBu THD + N: 20 Hz to 22 kHz @ +10 dBu, 1 W, Dynamic Range: 20 Hz to 22 kHz @ 20 dB, >102dB, with 20 kHz digital low pass filter Crosstalk: Channel to Channel, stimulus at 20 dBu, 10 W output to receptor 8⿦ load, 20 Hz to 22 kHz, Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 128T Audio DSP Mixer with express shipping all over Pakistan.   The CONVERGE Pro 2 128T Audio DSP Mixer from ClearOne is a complete conferencing solution with 12 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in Telco interface for teleconferencing. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection. The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.   Features: Architecture 12 mic/line inputs with AEC Built-in Telco with ClearEffect processing Built-in USB for PC-based conferencing Scalable Connectivity Standalone and daisy-chained system Stack up units up to 96 mic/line inputs Expansion bus C-Link with 64 channels P-Link bus to connect 6 peripherals Configuration & Management CONSOLE software Auto-discovery of devices Matrix View for entire system FlowView for visualized audio signal paths System monitoring and troubleshooting Audio Signal Processing Acoustic Echo Cancellation processing Distributed Echo Cancellation on every mic input Noise cancellation with Adaptive-Ambience Acoustic Intelligence with faster convergence DARE feedback elimination Microphone gating Flexible Control Options Dialer app for Windows, Mac, iOS, and Android Tabletop controller with a touch panel Wall controller with buttons Web-based controller Supports 3rd-party control modules   Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: Proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

Description: Details iShopping.pk brings you the best price for Gamdias Kratos P1A-750G 80 Plus Gold 750W Power Supply with express shipping all over Pakistan.   Details: The KRATOS P1A - 750G retains up to 90%+ of its energy conversion efficiency to significantly reduce unneccessary clamor, while offering its auto-optimizational fan speed-to-temperature cooling mechanism to achieve a quiet and adequate recreational or working environment. Not to mention the phenomenal built-in addressable RGB LED adjustment functionality that productively supplies KRATOS the vitality to power your dazzling RGB fortress up like none other   Hyper-Efficiency With its spectacular energy conversion efficiency, the KRATOS P1A-750G is capable of delivering up to 90% of its converted utility power (Mains AC) into low-voltage regulated DC Power, preventing the conduction of excess thermal energy while providing a Virtually Silent Operation & a Tamult-Free Gaming or Working Environment.   A Visual Adventure Equipped with 30 Built-in Addressable Neon-Flex RGB LED lighting-effects adjustable with a simple tap of your finger tip, the KRATOS P1A-750G offers a myriad of phenomal and exquisite chromatic delicacy. By utilizing its RGB Motherboard Sync (5V 3-pin) functionality, addressable LED effects could be controlled effortlessly via the software designated to your motherboard, as it delivers the power supply that your battle-station longs for.   Revolutionary Power-Supplying Effiency By retaining to its fabulous DC to DC design and dynamic single +12V rail, the KRATOS P1A-750G assures you a steady and reliable power supply to your rig.   Double-Trouble!! Demonstrating his Divine Personification of Strength, the KRATOS P1A-750G offers an auxiliary CPU 4+4 PIN Connector, allowing the son of Titans to kill two birds with one stone!

PRODUCT DESCRIPTION:Branded used Original 13 Amps Fused Malaysia AC Power Cord/Cable for Computers, PC, Monitor and LCD devices. Fused with 13A fuse and 3 pin mains power lead. This AC power cord is the perfect replacement! Use this cable as a replacement cord for laptops and notebooks that require a 3-slot power cord. The 3-Slot Female connector plugs directly into your device. If the power cord for your laptop/notebook is starting to show signs of wear and tear, replace it with this New and high quality cable.

AA Tigers 550W Power Supply  Price in Pakistan SPECS: Powerfull 12V output design provides strong power for graphics card. Wide 170-240V design, automatically adapt to low voltage mains input. Using 12CM smart fan, long service life and noise less than 26dB. No-load frequency reduction energy-saving chip, standby power consumption is less than 0.5W, more energy-saving. With OVP UVP OCP OTP OPP and other multiple protection.

AA Tigers 750W Power Supply Price in Pakistan SPECS: Powerfull 12V output design provides strong power for graphics card. Wide 170-240V design, automatically adapt to low voltage mains input. Using 12CM smart fan, long service life and noise less than 26dB. No-load frequency reduction energy-saving chip, standby power consumption is less than 0.5W, more energy-saving. With OVP UVP OCP OTP OPP and other multiple protection.

AA Tigers 650W Power Supply Price in Pakistan SPECS Powerfull 12V output design provides strong power for graphics card. Wide 170-240V design, automatically adapt to low voltage mains input. Using 12CM smart fan, long service life and noise less than 26dB. No-load frequency reduction energy-saving chip, standby power consumption is less than 0.5W, more energy-saving. With OVP UVP OCP OTP OPP and other multiple protection.

Key points of this Hp 215 G1 charger Fits wide range of Hp notebooks Free power cable mains adapter plug New smaller blue tip with pin in centre Genuine Hp 215 G1 45w blue tip laptop charger

Specifications Condition: New Power: Not specified Output Voltage: 19V Output Current: 3.42A DC Cable Length: 1.2m Mains Power Cable: Included Warranty:1 Month