Linksys cisco access

The Cisco 9124AX Access points Series outdoor access points are next-generation Wi-Fi 6 access points encased in a rugged and robust design that service providers and enterprises can easily deploy.

Linksys WAP1200AC AC1200 Wi-Fi  The  Linksys WAP1200AC AC1200 Wi-Fi Access Point  is the latest in the AC-series access points, which utilizes the  Cross Band technology.  It can be used as a  Wireless Range Extender  or a  Wired Access Point.  Both functions maximize simultaneous use of the 2.4 GHz and 5 GHz bands for high-speed data transfer, uninterrupted streaming, and gaming.   Front Panel    Antenna positioning is done depending on the type of home you have. IMPORTANT:   The antennas are fixed and can  ONLY  rotate at  180 degrees.  Do  NOT  force the antennas too far back, otherwise, they will break. For  Single-story homes  -   Both antennas should be pointing  down. NOTE:   For illustration purposes, the Linksys RE6700 is used in this example. For  Multi-story homes  -  One (1)  antenna should  always be pointing down  to provide coverage for the current floor.  The second antenna (any antenna) should be positioned differently  depending  on where the Linksys WAP1200AC is located and where the coverage is needed. NOTE:   For the most part, position one (1) antenna at  45 degrees  as shown in  Position   A  below.  If there are issues with coverage, move the antenna at about  50-55 degrees  down as shown in  Position   B.    Position A  can be used if the Linksys WAP1200AC is in the  middle  of the house.   Position B  can be used if the Linksys WAP1200AC is connected to an outlet located at the  farther side  of the house.   Side Panel    Wi-Fi Protected Setup™ (WPS)  button – Uses the WPS technology to automatically and securely add wireless devices to your network.  Reset  button – Press and hold for  10 seconds  to reset the Linksys WAP1200AC to factory default settings.   Bottom Panel    ETHERNET  port – Connect an Ethernet-enabled device to the network using either a  Cat 5  or  6  Ethernet cable.   Product Features Concurrent dual-band (2.4 GHz and 5 GHz) 802.11ac Wireless technology Compatible with 802.11 a/b/g/n Data Rate of up to 300 Mbps for 2.4 GHz and up to 867 Mbps for 5 GHz Two (2)  external non-detachable antennas 2 x 2 Spatial Streams One (1)  10/100/1000 Fast Ethernet port with auto MDIX sensing Spot Finder technology (on Range Extender Mode only) Wi-Fi Protected Setup™ (WPS) Browser-based Setup (BBS) Cross Band technology  (on Range Extender Mode only) Beamforming technology LED Behaviors  Power / WPS LED: OFF  – There is no power on the Linksys WAP1200AC. Blinking Green   / Yellow  – The Linksys WAP1200AC is starting up, resetting to factory defaults, upgrading its firmware, or the WPS connection is in process. Solid Green   / Yellow  – The Linksys WAP1200AC is ready to use. Solid Amber   / Red  – There is a weak connection with the router. NOTE:   To fix this issue, unplug the Linksys WAP1200AC and move it closer to the router. Blinking Amber / Red  – The Linksys WAP1200AC is not connected to the router, or the WPS pairing failed. NOTE:   To fix this issue, make sure that your router has an active Internet connection and the Wi-Fi is turned ON.  If the router is working fine, unplug the Linksys WAP1200AC then move it closer to the router.  Plug it back in, wait for one (1) minute, and reconnect to your network.  Ethernet LED  –   It lights up solid  Green  when an Ethernet device is connected and active.  It will blink when sending or receiving data over the Ethernet port.   Product Requirements Wi-Fi enabled computers or mobile devices AC power outlet Ethernet router or switch with available RJ45 Ethernet port and RJ45 Cable for Access Point mode or wireless network for Range Extender mode For browser configuration: Internet Explorer® 8 or higher Safari® 5.1 for Mac® or higher Google Chrome™ 25.0 or higher Firefox® 20 or higher   

Cisco AIR-AP1832I-H-K9 Wireless Access Point / Aironet Specifictions Software Cisco Unified Wireless Network Software Release with AireOS wireless controllers: 8.1.121.0 or later for the Cisco Aironet 1830 Series Access Points Deployment modes Centralized, standalone, sniffer, Cisco FlexConnect ™, monitor, OfficeExtend, mesh Supported wireless LAN controllers Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Cisco Catalyst ® 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco 5520 Series Wireless Controllers, Cisco Flex ®  7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco 8540 Series Wireless Controllers, Cisco 5760 Wireless LAN Controller, Cisco Catalyst 3650 and 3850 Series Switches with integrated controller Cisco Mobility Express 802.11n version 2.0 (and related) capabilities 3x3 MIMO with two spatial streams Maximal ratio combining (MRC) 20- and 40-MHz channels PHY data rates up to 300 Mbps (40 MHz with 5 GHz) Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) 802.11 dynamic frequency selection (DFS) Cyclic shift diversity (CSD) support 802.11ac Wave 1 and 2 capabilities 3x3 MIMO with two spatial streams, single-user or multiuser MIMO MRC 802.11ac beamforming (transmit beamforming) 20-, 40-, and 80-MHz channels PHY data rates up to 867 Mbps (80 MHz in 5 GHz) Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) 802.11 DFS CSD support Integrated antenna 2.4 GHz, gain 3 dBi, internal omni, horizontal beamwidth 360° 5 GHz, gain 5 dBi, internal omni, horizontal beamwidth 360° Interfaces 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE) Management console port (RJ-45) USB 2.0 (enabled via future software) Indicators Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors Dimensions (W x L x H) Access point (without mounting bracket): 8.3 x 8.3 x 2 in. (210.8 x 210.8 x 50.8 mm) Weight 3.12 lb (1.41 kg) Environmental Cisco Aironet 1830i Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) Nonoperating (storage) altitude test: 25˚C, 15,000 ft. Operating temperature: 32° to 104°F (0° to 40°C) Operating humidity: 10% to 90% (noncondensing) Operating altitude test: 40˚C, 9843 ft. System memory 1 GB DRAM 256 MB flash Input power requirements AP1830: 44 to 57 VDC Power supply and power injector: 100 to 240 VAC; 50 to 60 Hz Power draw 15.4W Note: When deployed using a PoE specification, the power drawn from the power sourcing equipment will be higher by some amount, depending on the length of the interconnecting cable. Powering options 802.3af/802.3at Enhanced PoE Cisco local power supply, AIR-PWR-C= Cisco power injector, AIR-PWRINJ5= (Note:This injector supports 802.3af only), AIR-PWRINJ6= Note: If 802.3af PoE is the source of power, the USB port is disabled. Warranty Limited lifetime hardware warranty

Cisco Linksys SPA922 Single Line VoIP IP Phone - Imported Features: Dual-switched Ethernet ports, speakerphone, caller ID, call hold, and conferencing. 802.3af PoE, high-resolution graphical display, speakerphone, and a 2.5 mm headset port. Support for one line with two call appearances, as well as three-way conferencing, attended call transfer, and call hold. Easy station moves and shared line appearances across local and geographically dispersed locations. Standard encryption protocols to provide secure remote provisioning and unobtrusive in-service software upgrades. Detailed performance measurement and troubleshooting. For more detail Call us 03455181377 03454797559

Cisco 7912 Unified Voip Phone Large Pixel-based display - gives access to features. 4 dynamic soft keys - Changeable calling options for the user to scroll through. Menu key - This key allows users to quickly access information such as call logs and phone settings. Hold key - visual indicatior that a call was placed on hold. Support of a single line or directory number Support of Extension Mobility Call monitor (speaker only, no microphone) Messages key - access to voicemail messages Four speed dials configurable at the Cisco Unified CallManager Cisco Discovery Protocol Differentiated Services Code Point (DSCP) tagging G.711a, G.711u, and G.729ab audiocompression coders-decoders (codecs) Integrated Ethernet switch 10/100BASE-T Ethernet connection through an RJ-45 interface for LAN connectivity Software upgrade supported using a Trivial File Transfer Protocol (TFTP) server Provisioning of network parameters through Dynamic Host Configuration Protocol (DHCP) Voice activity detection, silence suppression, comfort-noise generation, and error concealment Compatible with Cisco Unified CallManager Version 3.3(2) and later, using the Skinny Client Control Protocol (SCCP) protocol as well as SIP (RFC 2543)

Linksys LGS528P-UK Business Gigabit - 28 Ports Managed Rack-Mountable Switch POE+ Switch with 02 Combo SFP Ports Control and manage your business network with advanced features including layer 2 switching and layer 3 static routing between different VLAN communications without any performance degradation. As a result your network can run more efficiently, as Linksys 500 Series switches will manage internal routing with your router and dedicate fixed paths with external traffic and security. Deliver superior communication via video, voice and data applications over your business network with advanced QoS features. Layer 2 MAC and layer 3 IP flow-based policies and rate limiting control prioritize traffic, offering an ideal solution to manage and control real-time, high bandwidth, voice and video traffic without slowing down your other business applications. Specification   Device Type Switch - 28 ports - Managed Enclosure Type Rack-mountable 1U Subtype Gigabit Ethernet Ports 26 x 10/100/1000 (PoE+) + 2 x combo Gigabit SFP Power Over Ethernet (PoE) PoE+ PoE Budget 192 W Performance Forwarding performance: 41.67 Mpps ¦ Switching capacity: 56 Gbps Capacity Active VLANs: 1000 ¦ QoS hardware entries: 4 MAC Address Table Size 16K entries Jumbo Frame Support 9000 bytes Routing Protocol IGMPv2, IGMP, IGMPv3 Remote Management Protocol SNMP 1, RMON, Telnet, SNMP 2c, HTTP, HTTPS, TFTP Features DHCP support, ARP support, IGMP snooping, Syslog support, port mirroring, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, SNTP support, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, DHCP snooping, Access Control List (ACL) support, Quality of Service (QoS), STP Root Guard, DHCP relay, Link Aggregation Control Protocol (LACP), DHCP client, static routing, Class of Service (CoS), 802.1x authentication Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.3at, IEEE 802.3az Power AC 100/230 V (50 - 60 Hz) Dimensions (WxDxH) 44 cm x 20 cm x 4.445 cm Weight 3.12 kg

Cisco AIR-AP1832I-E-K9C Aironet Wireless Access Point  Specifications Device Type Radio access point Form Factor External - indoor Localisation Belgium, Bahrain, Lebanon, Oman, Saudi Arabia, United Arab Emirates, Bulgaria, Czech Republic, Estonia, Lithuania, South Africa, Iceland, Romania, Sri Lanka, Luxembourg, Hungary, Cyprus, Iraq, Ghana, Kenya, Nigeria, Liechtenstein, Gibraltar, Malta, Monaco, Croatia, Slovakia, Slovenia, Latvia, Libya, Austria, Denmark, Finland, France, Germany, Italy, Netherlands, Norway, Poland, Portugal, Spain, Sweden, Switzerland, United Kingdom, Greece, Turkey, Ireland, Serbia, Montenegro, Bosnia and Herzegovina RAM GB 1 Flash Memory 256 MB Data Link Protocol IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac (draft 5.0) Frequency Band 2.4 GHz, 5 GHz Power Over Ethernet (PoE) Supported PoE+ Power AC 120/230 V (50 - 60 Hz) Dimensions (WxDxH) 21.08 cm x 21.08 cm x 50.8 cm Weight 1.41 kg

Description: Details iShopping.pk brings you the best price for Linksys AC1900 Dual-Band Max-Stream MU-MIMO Gigabit Wi-Fi Router (EA7500)  with 1 year official warranty and express shipping all over Pakistan   PRODUCT HIGHLIGHTS • 802.11ac Protocol • Up to 1900 Mbps Throughput • Dual-Band 2.4 GHz / 5.0 GHz Frequencies • 4 x Gigabit LAN Ports • 1 x Gigabit WAN Port • 1 x USB 2.0 / 1 x USB 3.0 Ports • 3 x External, Dual-Band, Antennas • 1.4 GHz Dual-Core Processor   Specification Wi-Fi Technology AC1900 MU-MIMO Dual-band Gigabit, 600+1300 Mbps Network Standards 802.11b, 802.11a, 802.11n, 802.11ac, 802.11g Wi-Fi Speed AC1900 (N600 + AC1300) Wi-Fi Bands 2.4 and 5 GHz (simultaneous dual band) Number of Ethernet Ports 1 x Gigabit WAN port 4 x Gigabit LAN ports Other Ports 1 x USB 3.0 port 2 x USB 2.0 port Antennas 3 x external, dual-band, detachable antennas Processor 1.4 GHz dual-core LEDs Internet, Ethernet (1-4), Linksys Logo, WPS Encryption Up to 128-bit encryption Operation Modes Wireless Router Access Point Wired Bridge Wireless Bridge Storage File Systems FAT NTFS HFS+ Certified Operating Systems Mac OS (10.x or higher) Windows 7, 8.1 Minimum System Requirements Internet Explorer versions 8 and newer Safari 5 (for Mac) Firefox 8 Google Chrome Security 64/128-bit WEP WPA2-Personal WPA2-Enterprise Regulatory Compliance FCC class B Power Supply Input: 100-240 V ~ 50-60 Hz Output: 12 V, 3.5 A Dimensions 10.12 x 7.24 x 2.20" / 257 x 184 x 56 mm Weight 20.74 oz / 558 Overview With the EA7500 Max-Stream Dual-Band Wireless-AC1900 Gigabit Router from Linksys you can set up and configure your wireless network in no time using the Linksys Smart Wi-Fi application or through a web browser. Simply plug in the router and connect it to your modem, sign up for a Linksys Smart Wi-Fi account, and begin configuring your network settings such as wireless encryption, operating modes, drive management, and more. The EA7500 comes equipped with three dual-band detachable antennas and operates on both the 2.4 GHz and 5 GHz frequencies. With support for the 802.11ac networking standard users can take advantage of a maximum data transfer rate of up to 1900 Mbps. The wireless signal emitted by this router is beamed directly to connected devices thanks to built-in beamforming technology providing a stronger, more reliable signal. Users also benefit from MU-MIMO (multiple user - multiple input multiple output) technology designed to handle multiple data streams simultaneously to ensure tasks such as online gaming and streaming multimedia content operate lag free. If a wired connection is what you need, the EA7500 has you covered as it comes equipped with four Gigabit Ethernet ports. In addition to Gigabit Ethernet connectivity, you can also take advantage of a single USB 2.0 and USB 3.0 port designed to support external storage drives formatted FAT, NTFS, and HFS+. Once a drive is connected users throughout the network can access content stored on that drive.   802.11ac MU-MIMO The MAX-STREAM AC1900 Multi User-MIMO Router offers two dedicated Wi-Fi bands that deliver combined speeds of up to 1.9 Gbps. Users can manually assign high-bandwidth Wi-Fi activities such as 4K video streaming and online gaming to the high-speed 5 GHz band, while assigning older Wi-Fi devices and activities to the 2.4 GHz band. MU-MIMO Technology MU-MIMO (Multi-User, Multiple-Input, Multiple-Output) technology ensures uninterrupted simultaneous Wi-Fi connections to devices such as HD streaming media players, 4K TVs, tablets, and game consoles. Multiple devices receive high-speed Wi-Fi at the same time and same speed. Your family can access the Internet at the same time without experiencing lag or buffering--at up to 2x the speed of a non-MU-MIMO router. Lag-Free Online Gaming via Powerful Processor Take advantage of fast-paced Wi-Fi activities such as online multiplayer gaming with the MAX-STREAM AC1900. Powered by a 1.4 GHz dual-core processor, it is capable of handling three simultaneous data streams, delivering improved Wi-Fi performance and faster Wi-Fi speeds to more devices. High-Speed Wired Connectivity with Gigabit Ethernet Ports Connect more devices and share files at speeds 10x faster than Fast Ethernet with four Gigabit Ethernet ports. Connect a storage device and quickly transfer files or share devices such as printers across your Wi-Fi network using the USB 2.0 and USB 3.0 ports. Improved Wi-Fi Speed and Range with Beamforming Direct Wi-Fi signals to each of your mobile devices to increase signal strength and coverage with the MAX-STREAM Wi-Fi router using Beamforming technology. Play video games, listen to music, check emails, shop online, stream HD movies, and more, without having to worry about dropped signals. Linksys Smart Wi-Fi Linksys Smart Wi-Fi lets you access your network anytime, anywhere. Using your browser or the Smart Wi-Fi mobile app, you can: • Prioritize devices or websites for video streaming and online gaming • Control inappropriate or distracting content • Monitor network activity and speed • Turn Wi-Fi access on or off for any connected device • Create a separate, password-protected guest network   NEXT-GEN AC DELIVERS POWERFUL WI-FI TO MULTIPLE DEVICES   The Linksys MAX-STREAM AC1900 features MU-MIMO, the latest advance toward uninterrupted, simultaneous Wi-Fi connections.   Devices such as HD streaming media players, 4K TVs, tablets, and game consoles use a lot of bandwidth. But with MU-MIMO (Multi-User, Multiple-Input, Multiple-Output) technology, the MAX-STREAM AC1900 sends advanced Wi-Fi to multiple devices at the same time and same speed. Your whole family can play, stream, and work at once, without experiencing lag or buffering--at up to 2x the speed of a non-MU-MIMO router.   ENJOY COMBINED WI-FI SPEEDS UP TO 1.9 GBPS Our MAX-STREAM AC1900 Multi User-MIMO Router offers two dedicated Wi-Fi bands that deliver combined speeds of up to 1.9 Gbps. It also allows you to make your time online more efficient: simply assign high-bandwidth activities, like 4K video streaming, to the high-speed 5 GHz band, and leave basic activities like email to the 2.4 GHz band. POWERFUL PROCESSOR FOR IMPROVED PERFORMANCE Enjoy fast-paced Wi-Fi activities such as online multiplayer gaming with the MAX-STREAM AC1900. Powered by a 1.4 GHz dual-core processor, it is capable of handling three simultaneous data streams. This results in improved Wi-Fi performance and faster Wi-Fi speeds to more devices. HIGH-SPEED WIRED CONNECTIVITY WITH GIGABIT ETHERNET PORTS Connect more devices and share files at speeds 10x faster than Fast Ethernet with four Gigabit Ethernet ports. Connect a storage device and quickly transfer files. Or, share devices such as printers across your Wi-Fi network using the USB 2.0 and USB 3.0 ports. IMPROVED WI-FI SPEED AND RANGE WITH BEAMFORMING Direct Wi-Fi signals to each of your mobile devices to increase signal strength and coverage with our MAX-STREAM Wi-Fi router using Beamforming technology. Play video games, listen to music, check emails, shop online, stream HD movies, and more, without having to worry about dropped signals.       LINKSYS SMART WIFI        CUSTOMIZE AND MANAGE YOUR HOME WI-FI  ANYTIME, ANYWHERE  With the Linksys Smart Wi-Fi App, you can closely monitor and  manage your home Wi-Fi remotely using a smartphone or tablet.  Guest Access:  Create a separate, password-protected Wi-Fi  network for up to 50 guests and easily share the password.  Parental Controls:  Ensure a safe Internet experience for your  kids -- even when you're away from home. Restrict access to  inappropriate or distracting content, control usage, and block  specific devices from accessing the Internet.  Device Prioritization:   You can prioritize devices that need the  most speed.  

Description: Details iShopping.pk brings you the best price for Linksys AC5400 Tri-Band Max-Stream MU-MIMO Gigabit Wi-Fi Router (EA9500)with 1 year official warranty and express shipping all over Pakistan   AT A GLANCE Enterprise-grade Wi-Fi for your home with Next-Gen AC. • Wi-Fi to multiple devices at once, at same speed with Multi-User MIMO • Tri-Band Wi-Fi speeds up to 5.3 Gbps* • Access and control home Wi-Fi from anywhere with Smart Wi-Fi   Specification Wi-Fi Technology         AC5400 MU-MIMO Tri-band Gigabit, 1000+2165+2165 Mbps  Key Features Tri-Band (5 GHz + 5GHz + 2.4 GHz)  4x4 AC, MU-MIMO  Advanced Security  USB 3.0 Port  Dual-Core CPU  Beamforming Technology  8 Adjustable Antennas  Smart Wi-Fi Network Standards 802.11b  802.11a/g  802.11n  802.11ac Wi-Fi Speed AC5400 (N1000 + AC2615 + AC2615)  Wi-Fi Bands 2.4 and 5 GHz(2x) (simultaneous tri-band)  Wi-Fi Range Very Large Household  Number of Ethernet Ports 1x Gagabit WAN port  8x Gigabit LAN ports Other Ports One(1) USB 3.0 port  One(1) USB 2.0 port  Power Antennas 8x external adjustable antennas  Processor 1.4 GHz dual-core  LEDs Status Indicator, MU-MIMO Indicators, illuminated Linksys logo, Wi-Fi, Wi-Fi Protected Setup, Power, Internet, LAN 1–8, USB 3.0, USB 2.0  Wireless Encryption 64/128-bit WEP, WPA2 Personal, WPA2 Enterprise  Operation Modes Wireless Router  Access Point  Wired Bridge  Wireless Bridge Storage File System Support FAT  NTFS  HSF+ Easy Setup Browser-based Setup  Linksys Smart Wi-Fi Setup Certified Operating Systems MacOS (10.X or higher), Windows 7, Windows 8.1  Minimum System Requirements Internet Explorer® 8  Safari® 5 (for Mac®)  Firefox® 8  Google Chrome™ Dimensions (LxWxH) 264.52 x 318.15 x 66.66 mm (10.41 x 12.53 x 2.62 in.) without antennas  Weight 1727.7 g (60.94 oz)  Security Features WPA/WPA2  128 bit AES link encryption  FCC class B Power Supply Input: 100-240V ~ 50-60Hz; Output: 12V, 5A      EASY SETUP Installation is fast and easy. No CD required.   TRI-BAND WI-FI TECHNOLOGY Three bands that deliver the fastest combined Wi-Fi speeds to more devices.   MU-MIMO Latest Wireless-AC technology for simultaneously streaming and gaming on multiple devices.      VERY LARGE HOUSEHOLD Experience powerful Wi-Fi coverage throughout a large house.   4X4 AC Four streams of data for stronger, faster performance when gaming and streaming.   8 HIGH-PERFORMANCE ANTENNAS Ensure optimal coverage and maximum signal strength – even in large, multi-story buildings. LINKSYS SMART WI-FI Monitor and control your home network from anywhere through the Linksys Smart Wi-Fi website or mobile app.   MAC + PC COMPATIBILITY Compatible with Mac and PC devices. BEAMFORMING TECHNOLOGY Optimizes performance by focusing wireless signal to connected devices. USB 3.0 PORT Share files and add external storage across your network with the USB 3.0 port. USB 3.0 offers enhanced speeds over 2.0.       SUPERCHARGED WORK AND PLAY WITH A NEXT-GEN AC WI-FI ROUTER Designed as a dual-purpose home office and entertainment Wi-Fi router, the MAX-STREAM AC5400 Tri-Band Wi-Fi Router (EA9500) delivers Wi-Fi to multiple users on multiple devices at the same time and same speed. Featuring MU-MIMO (Multi-User, Multiple-Input, Multiple-Output) technology, this Next-Gen AC Router treats your devices--PCs, Smart TVs, streaming devices, smartphones--as if each has its own dedicated router. Working in your home office, you'll enjoy lag-free videoconferencing and fast file transfer, even while the rest of the family is streaming 4K or HD media in the living room.     SMOOTH 4K VIDEO STREAMING WITH BLAZING-FAST WI-FI SPEEDS The MAX-STREAM AC5400 router offers three independent Wi-Fi bands that deliver extremely fast combined speeds of up to 5.3 Gbps.* Tri-Band technology delivers up to double the Wireless-AC performance of a dual-band router. High-bandwidth applications like videoconferencing and movie streaming are ideal for the two high-speed 5 GHz bands, while lower-bandwidth devices like older wireless-N and -G computers can utilize the 2.4 GHz band.     POWERFUL PROCESSOR FOR SUPERCHARGED WI-FI If you're working in your home office, you can quickly download large files thanks to the MAX-STREAM's 1.4 GHz dual-core processor, which delivers the performance necessary for seamless videoconferencing and fast file transfers. The AC5400 is capable of handling multiple high-speed data streams at once--delivering faster Wi-Fi speeds to more devices. ADVANCED SECURITY FEATURES FOR A SECURE CONNECTION With the MAX-STREAM AC5400 MU-MIMO Gigabit Wi-Fi Router (EA9500), your work files, data, and home network information are safely connected with WPA/WPA2 encryption and an SPI firewall. SMOOTH 4K VIDEO STREAMING WITH BLAZING-FAST WI-FI SPEEDS The MAX-STREAM AC5400 offers three independent Wi-Fi bands that deliver extremely fast combined speeds of up to 5.3 Gbps.* Tri-Band technology delivers up to double the Wireless-AC performance of a dual-band router. High-bandwidth applications like videoconferencing and movie streaming are ideal for the two high-speed 5 GHz bands, while lower-bandwidth devices like older wireless-N and -G computers can utilize the 2.4 GHz band.     CONNECT WIRED DEVICES WITH USB AND GIGABIT ETHERNET PORTS Eight Gigabit Ethernet ports let you connect an array of wired devices for enhanced file transfer speeds and stability--up to 10x faster than Fast Ethernet. Two USB connections--including one fast USB 3.0 port--are ideal for connecting shared storage devices or printers.   HIGH-PERFORMANCE ANTENNAS FOR MAXIMUM COVERAGE The router features eight adjustable external antennas, which can be positioned for optimal performance. They provide powerful streams of data to your devices, ensuring complete Wi-Fi coverage throughout your home. Unlike the two or three data streams found on other routers, the AC5400 delivers four simultaneous streams for stronger, faster performance.   IMPROVED MOBILE SPEED AND RANGE WITH BEAMFORMING Play video games, listen to music, check email, shop, stream movies, and more--without having to worry about signal drop-off. Beamforming technology directs Wi-Fi signals to each of your mobile devices. This focused direction provides increased signal strength and coverage.    LINKSYS SMART WI-FI         CUSTOMIZE AND MANAGE YOUR HOME WI-  FI ANYTIME, ANYWHERE  With the Linksys Smart Wi-Fi App, you can closely  monitor and manage your home Wi-Fi remotely using a  smartphone or tablet.  • Guest Access:  Create a separate, password-  protected Wi-Fi network for up to 50 guests and easily  share the password.  • Parental Controls:  Ensure a safe Internet experience  for your kids -- even when you're away from home.  Restrict access to inappropriate or distracting content,  control usage, and block specific devices from  accessing the Internet.  • Device Prioritization:   You can prioritize devices that  need the most speed.  

PERFORMANCE PERFECTED® With an advanced 1.6 GHz dual-core CPU and an impressive 512MB of RAM, the WRT1900ACS delivers improvements in wired, wireless, and network storage performance over its predecessor, the WRT1900AC. At speeds up to N600 + AC1300 Mbps, the WRT1900ACS meets the needs of the most demanding home Wi-Fi networks. Equipped with a four-antenna configuration, the router provides exceptional signal strength and range. Advanced users also have the option of modifying the router with open source firmware.   ADVANCED 1.6 GHZ DUAL-CORE PROCESSOR TO SURF, STREAM, & GAME SIMULTANEOUSLY With a professional-grade 1.6 GHz dual-core ARM processor, the WRT1900ACS delivers faster throughput speeds and easily handles multiple data streams simultaneously. The result: better performance, particularly in today's multi-device homes. 512MB OF RAM FOR IMPROVED DATA TRANSFER The WRT1900ACS comes equipped with 512MB of RAM that works in tandem with the 1.6GHz CPU to move movies, music, and other large files faster. With more than double the memory of its predecessor, the WRT1900ACS improves data transfer speeds, allowing you to do more, faster. USB 3.0, ESATA, & GIGABIT ETHERNET PORTS TO SHARE FILES The WRT1900ACS has four Gigabit Ethernet ports that are perfect for transferring large media libraries at speeds 10X faster than Fast Ethernet. To stream or send large files across your network at high speed, simply connect a flash drive to the USB 3.0 port or an external SATA storage device to the eSATA port. The eSATA port also serves as a USB 2.0 port. FOUR EXTERNAL ANTENNAS FOR GREATER RANGE & COVERAGE The WRT1900ACS features four external, adjustable high-performance antennas that provide strong, reliable coverage throughout your home. The unique antenna diversity technology onboard helps your laptop, tablet, smartphone, and other connected devices achieve an optimal connection, wherever they are in your home. The antennas also enhance coverage for both 2.4GHz and 5GHz bands, keeping everyone gaming, downloading, and streaming without lag. BEAMFORMING FOR STRONGER, MORE FOCUSED WI-FI CONNECTIONS Designed especially for today's mobile-device households, the WRT1900ACS features Beamforming technology, which focuses wireless signals at a receiving device rather than simply sending out Wi-Fi in a general direction. MORE FEATURES OPEN SOURCE READY While the Linksys WRT1900ACS provides an outstanding experience via Smart Wi-Fi immediately out of the box, advanced users can further modify the router with open source firmware. Developed for use with OpenWRT, an open source, Linux-based operating system, the router offers an additional layer of customization to suit your needs. LINKSYS SMART WI-FI Linksys Smart Wi-Fi lets you access your network anytime, anywhere. Using your browser or the Smart Wi-Fi mobile app, you can: Prioritize devices or websites for video streaming and online gaming Control inappropriate or distracting content Monitor network activity and speed Turn Wi-Fi access on or off for any connected device Create a separate, password-protected guest network Create your free Linksys Smart Wi-Fi account here: www.linksyssmartwifi.com   SMART WI-FI WITH NETWORK MAP LETS YOU VIEW ALL OF YOUR CONNECTED DEVICES With the Network Map, you can: See all devices on your network on a single screen Track online status and signal strength of your devices Measure bandwidth consumption by device Create personalized names to easily identify your connected devices GET SMART IN THREE EASY STEPS Managing your network with Linksys Smart Wi-Fi is fast and easy: Set up your wireless home network using a Linksys Smart Wi-Fi Router. The router will broadcast a wireless signal to your Wi-Fi-enabled devices like gaming consoles, TVs, mobile devices, and printers. Sign up for a Linksys Smart Wi-Fi Account. It's fast and free. Smart Wi-Fi software lets you access and control your home network from wherever you are, whenever you need to. Customize your network with the Linksys Smart Wi-Fi apps of your choice. Upgrade the functionality of Linksys Smart Wi-Fi tools, by downloading exclusive Linksys Smart Wi-Fi apps to your mobile devices.

Enjoy the benefits of Wireless-N300 (802.11n) in your home ideal for surfing the web, emailing and printing wirelessly Connect your computers, wireless printers, smartphones, and other wireless devices at up to 300 Mbps transfer speed Enjoy broad wireless coverage provided by MIMO antenna technology Use four Fast Ethernet (10/100 Mbps) ports to directly connect wired devices Keep your network protected with customizable security settings, including WPA/WPA2 Personal and SPI firewall protection Give visitors password-protected Internet access on a separate network? So your visitors have access to the Internet, but not your computers or data Set up your wireless network in three easy steps using included Cisco Connect software Use Parental Controls to block specific websites and restrict Internet access during certain hours

Description: Details iShopping.pk brings you the best price for Linksys AC3200 MU-MIMO Dual-Band Gigabit Wireless Router (WRT3200ACM) with 1 year official warranty and express shipping all over Pakistan.   Highlights: •  802.11a/b/g/n/ac Wi-Fi Standards •   Up to 3200 Mbps Wi-Fi Data Throughput •   Simultaneous Dual-Band Support •   4 x Dual-Band Detachable Antennas •   4 x Gigabit Ethernet LAN Ports •   1 x Gigabit Ethernet WAN Port •   1 x USB 3.0 Port •   1 x Combo eSATA/USB 2.0 Port •   MU-MIMO Technology •   Tri-Stream 160 MHz Wireless Connectivity   Linksys AC3200 MU-MIMO Dual-Band Gigabit Wireless Router (WRT3200ACM) With a 1.8 GHz enterprise grade dual-core processor the  WRT3200ACM Dual-Band Wireless-AC3200 Gigabit Router  from  Linksys  has enough processing power to handle multiple data streams simultaneously. Take advantage of enhanced wireless network functionality as the WRT3200ACM supports wireless 802.11a/b/g/n/ac networking standards and functions on both the 2.4 GHz and 5 GHz frequencies. With simultaneous dual-band connectivity you benefit from data transfer rates up to 3.2 Gbps, which is perfect for streaming HD content, online gaming, and more. This router also supports Tri-Stream 160 MHz connectivity accompanied by MU-MIMO technology offering three separate data streams for a total bandwidth of up to 2.6 Gbps. The WRT3200ACM router features four detachable external antennas, four Gigabit Ethernet ports, one eSATA port, one USB 2.0 port, and one USB 3.0 port. The four upgradable antennas provide expansive wireless networking connectivity while the four Gigabit Ethernet ports ensure a fast, reliable, wired networking option. Additionally, the integrated eSATA port, USB 2.0 and USB 3.0 ports make it simple to attach peripherals such as external hard drives. For enhanced networking functionality the WRT3200ACM comes equipped with Smart Wi-Fi software giving you the ability to monitor nearly every aspect of your network. Whether on a PC or mobile device you can monitor your network, set parental controls, restrict network access, and more. This router is also open-source ready giving advanced users the ability to modify the router including the option to take advantage of available open source firmware.   Ultra Fast Wi-Fi Bring ultra-fast AC Wi-Fi to your home with the WRT3200ACM MU-MIMO Open Source Wi-Fi Router. Equipped with Tri-Stream 160 and premium MU-MIMO technologies, this open-source router delivers fast, uninterrupted dual-band Wi-Fi speeds to multiple devices at the same time.   Tri-Stream Technology Equipped with innovative Tri-Stream 160 technology, the WRT3200ACM delivers enhanced Wi-Fi speeds with virtually no lag. Not available on other Wi-Fi routers, Tri-Stream 160 effectively doubles the bandwidth of the 5 GHz band to power data-heavy activity with ultra-fast 2.6 Gbps Wi-Fi speeds.   DFS Certified Dynamic frequency selection (DFS) certification from the FCC not only allows operation at 160 MHz enabling Tri-Stream160, but it also triples the channels available at 80 MHz, so your router can operate in the clearest airspace that other Wi-Fi routers aren't allowed.   MU-MIMO Thanks to MU-MIMO technology, the WRT3200ACM router can handle even the most bandwidth-intensive environments. MU-MIMO builds upon longtime broadcasting cornerstones--such as spatial multiplexing, beamforming, and scheduling algorithms--to boost overall throughput and distribute Wi-Fi bandwidth fairly between devices. Each connected client device receives its own dedicated data stream, so users won't have to compete with one another for bandwidth. Multiple users can simultaneously engage in 4K video streaming, play online games, and perform other data-intensive tasks without latency or buffering.   Enterprise Grade 1.8 GHz Processor Boosts Throughput Equipped with an enterprise-grade dual-core processor, the WRT3200ACM packs the computing power needed to handle even the heaviest network traffic and deliver the lowest latency. The result is a fast, responsive home network that never lags.   Open Source Firmware Offers Advance Customization Advanced users can harness the expanded potential of the WRT3200ACM router by customizing with open source firmware. Using packages from established open source distributions like OpenWrt and DD-WRT, you can: • Set up a secure VPN • Turn the router into a web server • Create and manage hotspots • Capture, analyze, and manage network traffic • Detect network intrusion • Access TOR network for anonymous browsing • Employ many other advanced open source features   Specifications: Wi-Fi Technology: AC3200 MU-MIMO Dual-band Gigabit, 600+2600 Mbps  Key Features: 802.11a  802.11g  802.11n  802.11ac Wi-Fi Speed: AC3200 (N600 + AC2600)  Wi-Fi Bands: 2.4 and 5 GHz (simultaneous dual-band)  Wi-Fi Range: Very Large Household  Number of Ethernet Ports: 1x Gigabit WAN port  4x Gigabit LAN ports Other Ports: One(1) USB 3.0 port  One(1) Combo eSATA/USB 2.0 port  Power Antennas: 4x external, dual-band, detachable antennas  Processor: 1.8 GHz dual-core  LEDs: Power, Internet, 2.4 GHz, 5 GHz, eSATA, USB1 (USB 2.0), USB2 (USB 3.0), LAN 1–4 (activity/10/100 Mbps), LAN 1–4 (1 Gbps), WPS  Wireless Encryption: WPA2 Personal, WPA2 Enterprise  VPN Support: PPTP  IPSec pass‐through Operation Modes: Wireless Router  Access Point  Wired Bridge  Wireless Bridge  Wireless Repeater Storage File System Support: FAT, NTFS, and HFS+  Easy Setup: Browser-based Setup  Linksys Smart Wi-Fi Setup Certified Operating Systems: MacOS (10.X or higher), Windows 7, Windows 8.1 (Works with Windows 10)  Minimum System Requirements: Internet Explorer® 8  Safari® 5 (for Mac®)  Firefox® 8  Google Chrome™ Dimensions (LxWxH): 245.87 x 193.80 x 51.82 mm(9.68 x 7.63 x 2.04 in.) without antennas  Weight: 798.32 g(28.16 oz)  Operating Temperature: 32 to 104 F (0 to 40 C)  Storage Temperature: -4 to 140 F (-20 to 60 C)  Operating Humidity: 10 to 80% Noncondensing  Security Features: WPA/WPA2  128 bit AES link encryption Regulatory Compliance: FCC class B  Other Certifications: FCC DFS Certified  Additional Information: Open Source ready for OpenWrt, DD-WRT  Power Supply: Input: 100-240V ~ 50-60Hz; Output: 12V, 3.0A 

  Description The Cisco Catalyst 3560 v2 Series is the next-generation energy-efficient Layer 3 fast Ethernet switches. This series of switches supports Cisco EnergyWise technology, which enables companies to measure and manage power consumption of network infrastructure and network-attached devices, thereby reducing their energy costs and their carbon footprint. The Cisco Catalyst 3560 v2 Series consumes less power than its predecessors and is the ideal access layer switch for enterprise, retail, and branch-office environments, as it maximizes productivity and investment protection by enabling a unified network for data, voice, and video. Product Features Redundant power system The Cisco Catalyst 3560 v2 Series access switches support the generation of Cisco RPS 2300, which increases availability in a converged data, voice, and video network by providing transparent power backup to two of six attached Cisco Catalyst 3560 v2 Series switches at the same time. The Cisco Catalyst 3560 v2 Series switches are capable of reverting back to their internal power supply without any service interruption. Ease of use and deployment The Cisco Catalyst 3560 v2 series offers several ease of use features, which enable fast and easy configuration of advanced Cisco Catalyst capabilities. Enhanced security With the wide range of security features, such as ACLs, authentication, port-level security, and identity based network services (IBNS) with 802.1x and extensions, that the Cisco Catalyst 3560 v2 Series offers, businesses can protect important information, keep unauthorized people off the network, guard privacy, and maintain uninterrupted operation. switch. Product Details Device Type Switch - 24 ports - L3 - Managed Enclosure Type Rack-mountable 1U Interfaces Fast Ethernet Ports 24 x 10/100 + 2 x SFP Performance Switching capacity: 32 Gbps Capacity Switched virtual interfaces (SVIs): up to 1000 Virtual interfaces (VLANs): 1000 MAC Address Table Size 12K entries Jumbo Frame Support 9016 Routing Protocol RIP-1, RIP-2, HSRP, static IP routing Remote Management Protocol SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s Power AC 120/230 V (50/60 Hz) Dimensions (WxDxH) 44.3 cm x 29.5 cm x 4.4 cm Weight 3.7 kg Manufacturer Warranty Limited lifetime warranty Show Detailed Specification Show Detailed Specification General Device Type Switch - 24 ports - L3 - Managed Enclosure Type Rack-mountable - 1U Subtype Fast Ethernet Ports 24 x 10/100 + 2 x SFP Performance Switching capacity: 32 Gbps Capacity Switched virtual interfaces (SVIs): up to 1000 Virtual interfaces (VLANs): 1000 MAC Address Table Size 12K entries Jumbo Frame Support 9016 Routing Protocol RIP-1, RIP-2, HSRP, static IP routing Remote Management Protocol SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH Encryption Algorithm SSL Authentication Method Kerberos, RADIUS, TACACS+, Secure Shell v.2 (SSH2) Features Layer 3 switching, Layer 2 switching, auto-sensing per device, DHCP support, auto-negotiation, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, traffic shaping, MAC address filtering, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, Dynamic ARP Inspection (DAI), Time Domain Reflectometry (TDR), Per-VLAN Spanning Tree Plus (PVST+) Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s Flash Memory 32 MB Flash Status Indicators Link activity, port duplex mode, bandwidth utilization %, power, link OK, system Expansion / Connectivity Interfaces 24 x 100Base-TX - RJ-45 1 x console - RJ-45 - management 2 x Ethernet 1000 - SFP (mini-GBIC) Power Contact: SA Computer SHOP# 61,62,73,74,77 1ST FLOOR MAKKAH CENTER HALL ROAD LAHORE Cell:03454113314 Ptcl# 04237353809 (Note) Don't send me sms never reply Just call only interested Person. We Have Delivery facility In Lahore Region........... Remember Us In Ur Pray....

Description: Details iShopping.pk brings you the best price for Linksys AC1900+ Dual Band Max-Stream MU-MIMO Wi-Fi Range Extender (RE7000) with 1 year official warranty and express shipping all over Pakistan   AT A GLANCE • Eliminate dead zones and boost Next-Gen AC1900 Wi-Fi throughout your home. •  Multi-User MIMO and Seamless Roaming for faster and more efficient throughput •  Supports two Wi-Fi modes, to extend router's connection or create a new Wi-Fi access point •  Works with all Wi-Fi routers •  Easy setup with WPS and Spot Finder Technology   ELIMINATE DEAD ZONES AND BOOST WI-FI RANGE Extend your home Wi-Fi to hard-to-reach locations in your home such as your backyard, garage, or bedroom so you can get the Wi-Fi to smartphones, iPads, tablets, and laptops to enjoy streaming HD movies, online gaming, social media, and more.   SEAMLESS ROAMING No more dropped connections for voice calls from iPhone, iPads, smartphones, or tablets when you move from one room to another or to your backyard when synced with a Linksys MAX-STREAM Router or other supported routers.   NEXT-GENERATION MULTI USER-MIMO EASILY HANDLES MULTIPLE USERS Next-generation MU-MIMO (Multi-User, Multiple-Input, Multiple-Output) technology ensures your network can deliver faster and more efficient throughput to every MU-MIMO connected device. This means your whole household can surf the Internet, stream HD movies, play online games, and more simultaneously--without annoying buffering or lag.   WORKS WITH ALL WI-FI ROUTERS This range extender is compatible with any Wi-Fi router, including those from Internet service providers. There's no need to adjust your router's settings when installing the extender.   EASY SETUP OPTIONS FOR OPTIMAL PLACEMENT Two simple ways to setup: • Simply press the Push Button Connect feature on the AC1900 MAX-STREAM to automatically sync it to your router. •  Simple setup from a smartphone, tablet, or laptop.   Find the optimal location for the range extender using Spot Finder Technology. If placed too far from an existing router, a range extender may not expand Wi-Fi or Wi-Fi may be spotty. Spot Finder helps ensure your Linksys range extender is in the right spot.   BEAMFORMING AND CROSSBAND FOR RELIABLE CONNECTIVITY Linksys range extenders provide a reliable connection that allows you to enjoy uninterrupted gaming and HD streaming with: Cross Band Technology to maximize simultaneous use of both bands for high speed connection Beamforming Technology to focus the Wi-Fi Signal directly to your smartphone, tablet, and laptop for faster Wi-Fi connection   CONNECT A WIRED DEVICE WITH GIGABIT ETHERNET PORT Connect a wired device such as a gaming console, Blu-ray player, Smart TV, or streaming player to your Wi-Fi network. The extender's Gigabit Ethernet port provides data transfer speeds 10x faster than a Fast Ethernet port.   DUAL BANDS FOR FASTER SPEED AND RELIABILITY The range extender offers dual wireless bands of 2.4 GHz and 5 GHz for combined speeds of up to 1.9 Gbps--double the performance of single band. Newer Wireless-AC devices are routed to the higher-speed 5 GHz band, while older wireless-N and G devices utilize the 2.4 GHz band.   Specification: Wi-Fi Technology AC1900+ MU-MIMO  Key Features MU-MIMO  Seamless Roaming  Crossband  Spot Finder Technology for best placement  Works with Any router Network Standards 802.11ac  802.11n  802.11a/g  802.11b Wi-Fi Speed AC1900 (N300 + AC1733)  Wi-Fi Bands Simultaneous Dual band, 2.4 Ghz + 5 Ghz  Wi-Fi Range 10,000 SQ FT  Number of Ethernet Ports 1x Gigabit  Other Ports None  Easy Setup CD-Less setup  Setup from mobile devices  Push and connect using Wi-Fi Protected set-up (WPS) Minimum System Requirements Latest versions of Google Chrome™, Firefox®, Safari® (for Mac® or iPad®), or Internet Explorer versions 8 or newer.  Physical Specifications  126 x 81 x 46 mm, approxmately 255g  Security Features Access Control (Wireless MAC Filtering) 

Description: Details iShopping.pk brings you the best price for Cisco Wireless-AC Dual Radio Wave 2 Access Point with 2.5GbE LAN Data Sheet (WAP581-E-K9) with 1 year official warranty and express shipping all over Pakistan   Features: ● Concurrent dual-band radio support offers up to 2.1 Gbps on a 5.0-GHz radio and 600 Mbps on a 2.4-GHz radio to use capacity and coverage most efficiently. ● Robust security, including WPA2, 802.1X with RADIUS secure authentication, and rogue access point detection, help protect sensitive business information. ● Wi-Fi Scheduler allows you to control your Wi-Fi network access during business and non-business hours. ● An integrated Wireless Packet Capture tool assists tech support in troubleshooting. ● Intelligent QoS prioritizes network traffic to help keep critical network applications running at top performance. ● Support for power-saving sleep mode and port control features help increase energy efficiency. ● Workgroup Bridge mode lets you expand your network by wirelessly connecting to a second Ethernet network. ● Support for IPv6 lets you deploy future networking applications and operating systems without costly upgrades. ● Sleek design with multiple internal antennas and a versatile mounting kit allows for installation on a ceiling, wall or desktop. ● Offers limited lifetime hardware warranty provides peace of mind.   Specifications: Standards IEEE 802.11ac, 802.11a, 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (spanning tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), and IPv6 (RFC 2460) Cabling type Category 5e or better Antennas Internal antennas optimized for installation on a wall or ceiling Operating system Linux Software Physical Interfaces Ports 2 GE ports - one 2.5G and second one 10/100/1000 Ethernet, with support for 802.3at at PoE; support is only for port 1 Buttons Reset button Lock slot Slot for Kensington lock LEDs One multifunction LED Physical Specifications Physical dimensions 1.5 x 9.0 x 9.0 in. (38x 229 x 229 mm) (H x W x D) Weight 3 lb (1.4kg) Network Capabilities VLAN support Yes Number of VLANs 1 management VLAN plus 32 VLANs for SSIDs 802.1X supplicant Yes Service Set Identifier (SSID)-to-VLAN mapping Yes Auto-channel selection Yes Spanning tree Yes Load balancing Yes IPv6 Yes ●  IPv6 host support ●  IPv6 RADIUS, syslog, and Network Time Protocol (NTP) Layer 2 802.1Q-based VLANS, 32 active VLANS plus 1 management VLAN Security W-Fi Protected Access (WPA) and WPA2 Yes, including enterprise authentication Access control Yes, management access control list (ACL) plus MAC ACL Secure management Secure HTTP (HTTPS) SSID broadcast Yes Rogue access point detection Yes Mounting and Physical Security Multiple mounting options Mounting bracket included for easy ceiling or wall mounting Physical security lock Kensington lock slot Quality of Service QoS Wi-Fi Multimedia and Traffic Specification (WMM TSPEC) and client QoS Performance Wireless throughput Up to 2.8-Gbps data rate (real-world throughput varies) Recommended user support Up to 200 connective users; 50 active users per radio Multiple Access Point Management Single Point Setup Yes Number of access points per cluster 16 Active clients per cluster 960 Configuration Web user interface Built-in web user interface for easy browser-based configuration (HTTP and HTTPS) Management Management protocols Web browser, Simple Network Management Protocol (SNMP) v3, and Bonjour Remote management Yes Event logging Local, remote syslog, and email alerts Network diagnostics Logging and packet capture Web firmware upgrade Firmware upgradable through web browser; imported or exported configuration file Dynamic Host Configuration Protocol (DHCP) DHCP client IPv6 host Yes HTTP redirect Yes Wireless Frequency Dual concurrent radios (2.4 and 5 GHz) Radio and modulation type Dual radio, orthogonal frequency division multiplexing (OFDM) IEEE 802.11a/n: OFDM (BPSK/QPSK/16QAM/64QAM/256QAM) IEEE 802.11ac: OFDM (BPSK/QPSK/16QAM/64QAM/256QAM) WLAN 802.11n/ac 4 x 4 MU-MIMO at 5 GHz and 3 x 3 MIMO on 2.4 GHz 21 for 20-MHz bandwidth; 9 for 40-MHz bandwidth; 4 for 80-MHz bandwidth 11 for 20-MHz bandwidth; 7 for 40-MHz bandwidth 802.11 dynamic frequency selection (DFS) Data rates supported IEEE 802.11b: DSSS (1/2/5.5/11) IEEE 802.11g: OFDM (6/9/12/18/24/36/48/54) IEEE 802.11n: Refer to the entries for this standard later in this list) IEEE 802.11b: 12.94 MHz IEEE 802.11g: 24.49 MHz EEE 802.11n MCS0 (HT20): 27.44 MHz IEEE 802.11n MCS0 (HT40): 36.18 MHz IEEE 802.11b: 29.76 dBm IEEE 802.11g: 29.24 dBm IEEE 802.11n MCS0 (HT20): 29.25 dBm IEEE 802.11n MCS0 (HT40): 23.81 dBm Frequency band and operating channels Frequency Band Channel No. Frequency Channel No. Frequency 2400~2483.5MHz 1 2412 MHz 7 2442 MHz 2 2417 MHz 8 2447 MHz 3 2422 MHz 9 2452 MHz 4 2427 MHz 10 2457 MHz 5 2432 MHz 11 2462 MHz 6 2437 MHz - - Frequency Band Channel No. Frequency Channel No. 5150- to 5250-MHz Band 1 36 5180 MHz 44 38 5190 MHz 46 40 5200 MHz 48 42 5210 MHz - 52 5260 MHz 60 54 5270 MHz 62 5250- to 5350-MHz Band 2 56 5280 MHz 64 58 5290 MHz - 100 5500 MHz 112 102 5510 MHz 116 104 5520 MHz 132 5470- to 5725-MHz Band 3 106 5530 MHz 134 108 5540 MHz 136 110 5550 MHz 140 149 5745 MHz 157 151 5755 MHz 159 5725- to 5850-MHz Band 4 153 5765 MHz 161 155 5775 MHz 165 Transmitted output power Transmitted Output Power: 2.4 GHz ●  802.11b: 20.0 +/– 1.5 dBm @ CH6, all rates ●  802.11g: 20.0 +/– 1.5 dBm@ CH6, 6 Mbps ●  802.11g: 17.0 +/– 1.5 dBm@ CH6, 54 Mbps ●  802.11n(HT20): 20.0 +/– 1.5 dBm@ CH6, MCS0 ●  802.11n(HT20): 17.0 +/– 1.5 dBm@ CH6, MCS7 ●  802.11n(HT40): 16.0 +/– 1.5 dBm@ CH6, MCS7 5-GHz UNII-1 (5150~5250 MHz) ●  802.11a: 22.0 +/– 2 dBm @ 6 Mbps ●  802.11a: 20.0 +/– 2 dBm @ 54 Mbps ●  802.11ac(VHT20): 22.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT20): 14.0 +/– 2 dBm @ MCS8 ●  802.11ac(VHT40): 21.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT40): 14.0 +/– 2 dBm @ MCS9 ●  802.11ac(VHT80): 20.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT80): 14.0 +/– 2 dBm @ MCS9 5-GHz UNII-2 (5250–5350 MHz)/UNII-2 Extended (5470–5725 MHz) ●  802.11a: 22.0 +/– 2 dBm @ 6 Mbps ●  802.11a: 20.0 +/– 2 dBm @ 54 Mbps ●  802.11ac(VHT20): 22.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT20): 14.0 +/– 2 dBm @ MCS8 ●  802.11ac(VHT40): 21.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT40): 14.0 +/– 2 dBm @ MCS9 ●  802.11ac(VHT80): 20.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT80): 14.0 +/– 2 dBm @ MCS9 5GHz UNII-3 (5725~5850MHz) ●  802.11a: 22.0 +/– 2 dBm @ 6 Mbps ●  802.11a: 20.0 +/– 12 dBm @ 54 Mbps ●  802.11ac(VHT20): 22.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT20): 14.0 +/– 2 dBm @ MCS8 ●  802.11ac(VHT40): 21.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT40): 14.0 +/– 2 dBm @ MCS9 ●  802.11ac(VHT80): 20.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT80): 14.0 +/– 2 dBm @ MCS9 Wireless isolation Wireless isolation between clients External antennas None Internal antennas 4 Internal fixed PIFA antenna Antenna gain in dBi 3.61 dBi @2.4 GHz; 6.23 dBi @5 GHz Receiver sensitivity 2.4 GHz ●  802.11b: –86 dBm @ 11Mbps ●  802.11g: –73 dBm @ 54 Mbps ●  802.11n(HT20): –71 dBm @ MCS7 ●  802.11n(HT40): –67 dBm @ MCS7 5GHz ●  802.11a: –90 dBm @ 6 Mbps ●  802.11a: –74 dBm @ 54 Mbps ●  802.11ac(VHT20): –66 dBm @ MCS8 ●  802.11ac(VHT40): –62 dBm @ MCS9 ●  802.11ac(VHT80): –58 dBm @ MCS9 Wireless distribution system (WDS) Yes Fast roaming Yes Multiple SSIDs 16 per radio Wireless VLAN map Yes WLAN security Yes Wi-Fi Multimedia (WMM) Yes, with unscheduled automatic power save Operating Modes Access point Access point mode, Wireless Domain Services (WDS) bridging, and Workgroup Bridge mode Environmental Power options IEEE 802.3at/af Ethernet switch Cisco power injector: SB-PWR-INJ2-xx Cisco power adapter: SB-PWR-48v-xx Peak power: 18 watts Compliance Safety: ●  UL 60950-1 ●  CAN/CSA-C22.2 No. 60950-1 ●  IEC 60950-1 ●  EN 60950-1 Radio approvals: ●  FCC Part 15.247, 15.407 ●  RSS-210 (Canada) ●  EN 300.328, EN 301.893 (Europe) ●  AS/NZS 4268.2003 (Australia and New Zealand) EMI and susceptibility (Class B): ●  FCC Part 15.107 and 15.109 ●  ICES-003 (Canada) ●  EN 301.489-1 and -17 (Europe) Operating temperature 32 to 104°F) (0 to 40°C) Storage temperature –4 to 158°F (–20 to 70°C) Operating humidity 10 to 85% noncondensing Storage humidity 5 to 90% noncondensing System memory 256-MB RAM 128-MB flash