Link port

D-Link (DES-1005P) 5-Port 10/100 Base-TX with 1 Port POE Unmanaged Switch Overview The D-Link DES-1005P 5-Port 10/100 Switch with 4 PoE Ports enables you to connect Power over Ethernet (PoE) devices such as wireless access points (APs), IP cameras, and IP phones to the network. Built with home and small business users in mind, the DES-1005P is compact and operates silently, making it ideal for most rooms and offices. Power over Ethernet The DES-1005P features four 10/100BASE-T ports that support the IEEE 802.3af and IEEE 802.3at PoE protocols, supplying up to 30 W on each PoE port and providing a total power budget of 60 W. You can connect compatible devices to the DES-1005P without using an additional power supply. This allows you to save on cabling and to install devices in locations without immediate access to power outlets. High Performance The DES-1005P features plug-and-play installation and requires no configuration. Auto MDI/MDI-X support on all ports removes the need for crossover cables when connecting to another switch or hub, and auto-negotiation on each port intelligently adjusts the port speed for compatibility with the connected device. With wire-speed filtering and store-and-forward switching, the DES-1005P maximizes network performance while minimizing the transmission of bad network packets. Green Technology The DES-1005P features green technology such as IEEE 802.3az Energy-Efficient Ethernet (EEE), link status detection, and cable length detection. EEE adjusts the power consumption of the switch based on network utilization, reducing the cost of ownership during periods of inactivity. Link status detection powers down ports when no links are detected, saving power when connected devices are shut down or disconnected. Cable length detection adjusts the power output of the port based on the cable length, reducing the power requirements of the switch. Compact and Silent The compact design of the DES-1005P allows placement in most locations, including those where space is at a premium. The desktop form factor provides everything you need to set up a new network or expand an existing network, while the fanless design ensures silent operation even in noise-sensitive areas such as workstations and meeting rooms. Technical Specifications General Hardware version = B1 Size  • Desktop Interfaces  • 5 10/100BASE-T ports Standards  • IEEE 802.3 10BASE-T Ethernet (twisted-pair copper) • IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper) • ANSI/IEEE 802.3 NWay auto-negotiation • IEEE 802.3x flow control • IEEE 802.1p QoS Media Interface Exchange  • Auto MDI/MDI-X adjustment on all ports Performance Switching Fabric  • 1 Gbps Transmission Method  • Store-and-forward Data Transfer Rates  • Fast Ethernet      • 100 Mbps (half-duplex)      • 200 Mbps (full-duplex) • Ethernet      • 10 Mbps (half-duplex)      • 20 Mbps (full-duplex) Packet Filtering / Forwarding Rates  • 0.744 Mpps MAC Address Table  • 2K entries per device RAM Buffer  • 64 KB per device PoE PoE Standards  • IEEE 802.3af  • IEEE 802.3at PoE-Capable Ports  • Ports 1 to 4 Power Budget  • 60 W (30 W max. per PoE port) LEDs • Power / PoE Max (per unit) • Power / Status (per port) • Activity / Link and Speed (per port) Physical Weight  • 0.26 kg (9.17 oz) Dimensions  • 100 x 98 x 28 mm (3.94 x 3.86 x 1.10 in) DC Input  • External 53.5 V / 1.2 A power adapter Power Consumption  • 63.26 W maximum (PoE on) • 3.61 W maximum (PoE off) • 0.68 W (standby) Temperature  • Operating: 0 to 40 ˚C (32 to 104 ˚F)  • Storage: -10 to 70 ˚C (-40 to 158 ˚F) Humidity  • Operating: 0% to 95% RH non-condensing  • Storage: 0% to 95% RH non-condensing Certifications Safety  • cUL • CB • LVD • BSMI EMI/EMC  • CE • BSMI • FCC • VCCI • RCM

D-Link 5‑Port Desktop Gigabit Poe+ Switch 5x Gigabit Ethernet ports (4x PoE+ ports) PoE+, 60W power budget 10 Gbps switching fabric capacity Plug & Play simplicity for easy installation 2-Year D-Link Warranty 5x Gigabit Ethernet ports (4x PoE+ ports) PoE+, 60W power budget 10 Gbps switching fabric capacity Plug & Play simplicity for easy installation 2-Year D-Link Warranty Fast. Compact. Convenient. The D‑Link DGS‑1005P 5‑Port Desktop Gigabit PoE+ Switch enables you to connect Power over Ethernet (PoE) devices such as wireless access points (APs), network video cameras and IP phones to the network. Built with home and small business users in mind, the DGS‑1005P is compact and operates silently, making it ideal for most rooms and offices. Gigabit Performance. The DGS-1005P features plug-and-play installation and requires no configuration. Automatic MDI/MDI-X support on all ports removes the need for crossover cables when connecting to another switch, and auto-negotiation on each port intelligently adjusts the port speed for compatibility with the connected device. With wire-speed filtering and store-and-forward switching, the DGS-1005P maximises network performance while minimising the transmission of bad network packets.                       Power Over Ethernet+ The DGS-1005P features four Gigabit Ethernet ports that support the IEEE 802.3af and IEEE 802.3at PoE, supplying up to 30 W on each PoE port and providing a total power budget of 60 W. You can connect compatible devices to the DGS-1005P without using an additional power supply. This allows you to save on cabling and power supplies and to install devices on locations without immediate access to power outlets. Green Technolog The DGS-1005P features green technology such as IEEE 802.3az Energy-Efficient Ethernet (EEE), link status detection, and cable length detection. EEE adjusts the power consumption of the switch based on network utilisation, reducing energy use during periods of inactivity. Link status detection powers down unused ports, saving power when connected devices are shut down or disconnected. Cable length detection adjusts the power output of the port based on the cable length, reducing the power requirements of the switch. Compact and Silent The compact design of the DGS-1005P allows placement in most locations, including those where space is at a premium. The desktop form factor provides everything you need to set up a new network or expand an existing network, while the fanless design ensures silent operation even in noise-sensitive areas such as workstations and meeting rooms.   Specs: Type Unmanaged Number of ports 5 ports Layer Layer 2 Main type of ports 1000BASE-T Gigabit Ethernet Switching capacity 10 Gbps PoE options 802.3af 802.3at Number of PoE ports 4 PoE power budget See datasheet Fanless   802.3az Energy-Efficient Ethernet support   Form Factor Desktop Housing Metal Jumbo frame yes Cable diagnostics yes MAC address 2K  

Description: The DES-1008C 10/100 Mbps Unmanaged Switch is economical, plug-and-play networking switch solution for SOHO and small and medium businesses wanting to ports that enable you to easily expand your network and provide a quick way to upgrade your network to fast connectivity.   Fast Networking Made Easy With data transfer speeds of up to 200 Mbps at full duplex, this switch is ideal for quick file transfers, online gaming and smooth streaming media. It features easy-to-access Ethernet ports with LED indicators per port to easily distinguish link status. Auto MDI/MDIX crossover makes connection a cinch; just plug in your cables and you’re ready to go.   Conserve Energy The DES-1008C implements 802.3az Energy Efficient Ethernet, which saves energy and reduces heat automatically without sacrificing performance or functionality. The switch can detect when a connected computer is shut down or when there is no Ethernet traffic, and will put the port in standby mode, saving a substantial amount of power. In addition, the switch optimizes power usage for each port for the length of cable connected to it, using only as much power as is required. Both of these features work together to help you save power automatically.   Reliable Plug and Play Installation The DES-1008C is Plug-and-Play device that requires no configuration, so setup is simple and hassle-free, and you can easily connect multiple computers, share files, music, and video across your home or small office network, or even create a multiplayer gaming environment. 802.3x flow control on each port minimizes dropped packets when the port’s receiving buffer is full, giving you a more reliable connection for all of your connected devices. Specs   General features: Device Interfaces  • Eight 10/100 Mbps LAN ports   Standards  • IEEE 802.3 10BASE-T • IEEE 802.3u 100BASE-TX • IEEE 802.3x Flow Control • IEEE 802.3az Energy-Efficient Ethernet (EEE)   Switching Capacity  • 1.6 Gbps switching fabric   Advanced Features  • Auto MDI/MDIX crossover for all ports • Secure store-and-forward switching scheme • Full/half-duplex for Ethernet/Fast Ethernet speeds • Supports 2,048 byte jumbo frames • Back pressure at half-duplex operation • Wire-speed reception and transmission • Store and-Forward switching method • Auto-negotiation for each port • EEE compliant IEEE 802.3 10BASE-T • IEEE 802.3u 100BASE-TX • IEEE 802.3az EEE • IEEE 802.3x flow control   Data Transfer Rates  • Ethernet:   • 10 Mbps (half duplex)   • 20 Mbps (full duplex) • Fast Ethernet:   • 100 Mbps (half duplex)   • 200 Mbps (full duplex)   Transmission Method  • Store-and-forward   MAC Address Table Size  • 2,000   Packet Filtering/Forwarding Rates  • Ethernet: 14,880 pps per port • Fast Ethernet: 148,800 pps per port   RAM Buffer  • 96 KB per device   Physical Parameters LED Indicators  • Per port: Link/Activity/Speed • Per device: Power   Media Interface Exchange  • Auto MDI/MDIX adjustment for all ports   Dimensions  • 131 x 54 x 21 mm   Weight  • 74.8 grams   Power  • DC 5 V / 0.55 A • DC jack: Located on side   Power Consumption  • Power On (Standby): 0.55 watts • Maximum: 1.55 watts   Temperature  • Operating: 0° to 40°C  • Storage: -40° to 70°C   Humidity  • Operating: 10% to 90% (Non-condensing)  • Storage: 5% to 95% (Non-condensing)   MTBF  • 1 579 582 hours   Maximum Heat Dissipation  • 0.691 BTU/h   Certifications • CE Class B • CE (LVD 2006/95/EC)

Product Description Product Description   DGS-1008P 8-Port Gigabit Metal Desktop Switch with 4 PoE Ports View larger PoE View larger D-Link Green View larger DGS-1008P 8-Port Gigabit Metal Desktop Switch with 4 PoE Ports The DGS-1008P offers an economical way for SOHO and small to medium businesses (SMB) to benefit from the increased bandwidth of Gigabit Ethernet. It provides 8 Gigabit ports for fast server deployment to meet increasing network loads. The Gigabit PoE ports provide a larger bandwidth for high speed network applications, especially IEEE802.11n Access Points, high resolution video cameras, and phones. Gigabit Connection for Home The D-Link DGS-1008P 8-Port Gigabit PoE Unmanaged Desktop Switch enables home and office users to easily connect and supply power to Power over Ethernet (PoE) devices such as wireless access points (APs), IP cameras, and IP phones. It also provides the opportunity to add additional Ethernet devices like computers, printers, and Network Attached Storage (NAS) onto a network. This compact PoE switch operates quietly, making it ideal for use in virtually any room or office. Power Over Ethernet (PoE) The first four ports of the DGS-1008P support the IEEE 802.3af PoE protocol. Each of these four ports can supply up to 15.4 watts, for a total PoE budget of 52 watts, allowing users to attach an IEEE 802.3af-compliant device to the DGS-1008P that requires no additional power. Use PoE for applications that are far from power outlets or when you want to minimize the clutter of extra cables. Conserve Energy The DGS-1008P makes use of D-Link Green technology, providing energy savings, reduced power consumption, and a longer product life without sacrificing operational performance or functionality. This switch helps to conserve energy through methods such as Link Status and Cable Length Detection. The Link Status feature automatically powers down ports that have no link, allowing the switch to save substantial amounts of energy by cutting power for unused ports or ports connected to computers that have been shut down. It can also detect connected cable lengths, and adjust power usage accordingly, helping you save energy without affecting networking performance. In addition, the fanless design extends the product’s life and also reduces noise. Auto MDI/MDIX Crossover All ports support automatic MDI/MDIX crossover, eliminating the need for crossover cables or uplink ports. Each port can be plugged directly to a server, hub, router, or switch using regular straight-through twisted-pair Ethernet cables.   Box Contains D-Link Switch Power Adapter User Documentation/Media      

18 Months Brand Warranty Tp Link LS1008 Network Switch 8 Port Switch With A Speed Of 10/100 Mbps 8× 10/100Mbps Auto-Negotiation RJ45 port, supporting Auto-MDI/MDIX Green Ethernet technology saves power IEEE 802.3X flow control provides reliable data transfer Plastic casing and desktop design Plug and play, no configuration needed Fanless design ensures quiet operation

18 Months Brand Warranty Tp Link 5 Port Dekstop Switch LS1005 10/100 Mbps Network Switch 5× 10/100Mbps Auto-Negotiation RJ45 ports, supporting Auto-MDI/MDIX Green Ethernet technology saves power consumption IEEE 802.3X flow control provides reliable data transfer Plastic casing and desktop design Plug and play, no configuration required Fanless design ensures quiet operation

18 Months Brand Warranty Tp Link GigaBit Switch LS1005G 10/100/1000 Mbps 5× 10/100/1000Mbps Auto-Negotiation RJ45 port, supporting Auto-MDI/MDIX Green Ethernet technology saves power IEEE 802.3X flow control provides reliable data transfer Plastic casing, desktop or wall-mounting design Plug and play, no configuration needed Fanless design ensures quiet operation

Description: Details iShopping.pk brings you the best price for D-Link 2 Port 100Base-TX to 100Base-FX Multi-mode Fiber (SC) Media Converter (DMC-300MSC) with express shipping all over Pakistan.   Specifications:   Number of Ports 1 x 10/100BASE-TX RJ-45 port 1 x 100BASE-FX SC port Standards IEEE 802.3 for 10BASE-T/F IEEE 802.3u for 100BASE-TX/FX Data Transfer Rate Ethernet: 10 Mbps/20 Mbps (half-duplex/full-duplex) Fast Ethernet: 100 Mbps/200 Mbps (half-duplex/full-duplex) Duplex Mode Half-duplex/full-duplex Media Types 10BASE-T: 2-pair Cat. 3/4/5/5e, Unshielded Twisted Pair (UTP) (up to 100 m) 10/100BASE-TX: 2-pair Cat. 5/5e, Unshielded Twisted Pair (UTP) (up to 100 m) 100BASE-FX: Multi-mode fi   e optic cable with SC connector (up to 2 km) Media Exchange Interface Auto-MDI/MDIX Transmission Mode Store-and-forward Forwarding Rate Full wire-speed forwarding rate Diagnostic LEDs Power Speed (for twisted pair ports) Full-duplex/Collision  LINK/ACT (for twisted pair ports) AC Input 5 V/1 A external power adapter  

18 Months Brand Warranty Tp Link Archer T4U Plus High power USB Dongle WiFi Adapter For PC Version 1.0 Wireless USB Adapter With Two External Antenas Speed Of AC1300 And Dual Band Ultra-Fast Wi-Fi – 1300Mbps wireless speeds (400Mpbs on the 2.4GHz band and 867Mbps on the 5GHz band) with support for the next generation 802.11ac Wi-Fi standard Dual Band Wireless - 2.4GHz and 5GHz bands for flexible connectivity Dual High-Gain antennas – Improved range, signal quality and transmission performance MU-MIMO –Delivers highly efficient wireless connection Super Speed USB 3.0 Port - Up to 10x faster transfer speeds than USB 2.0 Adjustable, Multi-Directional Antenna - Enable flexible deployment for the best reception

Tp Link Wifi Adapter For PC 18 Months Brand Warranty TL-WA725N USB Dongle With A Speed Of 150 Mbps Version 3.0 Sleek miniature design so small that once plugged in, can be left in a Laptop’s USB port Speedy wireless transmission at up to 150Mbps ideal for video streaming or internet calls Advanced Security: Supports 64/128 WEP, WPA, PA2/WPA-PSK/WPA2-PSK(TKIP/AES) Connect in no time with easy setup utility in 14 languages Windows 10/8.1/8/7/XP,OS X, Linux

Aslam-o-Alykum i want to sale (Tp-link tl-r488t 4 wan+1 lan port loadbalancer router) as soon as possible. very good condition 10/8. Price little bit Negotiable Highlights: Mbps WAN ports, Mbps LAN port Quad-bandwidth, enjoys multi-services provided by different ISPs Professional lightning protection keeps your investments as safe as possible Load Balancing, automatically selects the best line according to the load Condition: 8/10 - No Warranty

Description: Details Network Switch Delivered All Over Pakistan   iShopping.pk brings you the best price for Cisco 52 Port Gigabit Stackable Managed Switch (SG500-52-K9-CN) with express shipping all over Pakistan.   Specifications: Enclosure Type Rack-mountable Maxiumum Storage Temperature 158 F Ports 48 x 10/100/1000 + 2 x combo Gigabit SFP + 2 x SFP Device Type Switch - 52 ports - managed - stackable Routing Protocol Static IP Routing Humidity Operating Range 10-90% (non-condensing) Minimum Storage Temperature -4 F Depth 10.1 inches Minimum Operating Temperature 32 F Interfaces 50 x 10Base-T/100Base-TX/1000Base-T - RJ-45, 4 x SFP (mini-GBIC) Humidity Storage Range 10-90% (non-condensing) Flash Memory 32 MB Maximum Operating Temperature 104 F Voltage Required AC 120/230 V (50/60 Hz) Power Device Power supply - internal Power Over Ethernet (PoE) n/a Status Indicators Port transmission speed, system, link/activity Ram 256 MB

8× 10/100Mbos Auto-Negotiation RJ45 port, supporting Auto-MDI/MDIX Green Ethernet technology saves power IEEE 802.3X flow control provides reliable data transfer Plastic casing and desktop design Plug and play, no configuration needed Fanless design ensures quiet operation

8× 10/100/1000Mbos Auto-Negotiation RJ45 port, supporting Auto-MDI/MDIX Green Ethernet technology saves power IEEE 802.3X flow control provides reliable data transfer Plastic casing, desktop or wall-mounting design Plug and play, no configuration needed Fanless design ensures quiet operation

Ubiquity Networks ES-12F Managed Gigabit Backbone Fiber Switch 12 Gigabit SFP Ports and 4 Gigabit RJ45 Ports 16 Gbps Non-Blocking Throughput with 32 Gbps Total Switching Capacity Gigabit Connectivity For fiber connectivity, the EdgeSwitch Fiber features 12 SFP ports, eight of which also support 100 Mbps. For copper connectivity, the EdgeSwitch Fiber offers four Gigabit RJ45 ports. Powerful Switching Performance The EdgeSwitch Fiber offers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss. For its total, non‑blocking throughput, the EdgeSwitch Fiber supports up to 16 Gbps. Advanced Enterprise Switching The EdgeSwitch Fiber uses a sophisticated operating system that provides advanced switching features, including VLAN tagging and link aggregation, and limited layer-3 features, including static routing and DHCP server functionality.

Plug Type:EU, UK, USInterface:1 x 10/100M Ethernet Port (RJ45)Button:RE (Range Extender) Button, Reset ButtonInput Power:100-240V~50/60HzPower Consumption:About 3WWireless Standards:IEEE 802.11n, IEEE 802.11g, IEEE 802.11bDimensions (W x D x H):4.3 x 2.6 x 3.0 in. (110.0 x 65.8 x 75.2mm)Antenna 2 x internal Frequency:2.4~2.4835GHzSignal Rate:11n: Up to 300Mbps (dynamic)11g: Up to 54Mbps (dynamic)11b: Up to 11Mbps (dynamic)Reception Sensitivity 270M: -68dBm@10% PER130M: -68dBm@10% PER108M: -68dBm@10% PER54M: -68dBm@10% PER11M: -85dBm@8% PER6M: -88dBm@10% PER1M: -90dBm@8% PERTransmit Power

5× 10/100Mbps Auto-Negotiation RJ45 ports, supporting Auto-MDI/MDIX Green Ethernet technology saves power consumption IEEE 802.3X flow control provides reliable data transfer Plastic casing and desktop design Plug and play, no configuration required Fanless design ensures quiet operation

D-Link DGS-1510-28X Gigabit Stackable Smart Managed Switch with 10G Uplinks 24 x 10/100/1000BASE-T ports 4 x 10G SFP+ ports Layer 2 management and security with Layer 3 capabilities Static Routing and MSTP Industry Standard CLI with 10G SFP+ stacking The D-Link DGS-1510 Series is the latest generation of Smart Managed switches with 10G SFP+ fibre ports for physical stacking or uplinks. The combination of high bandwidth connections, an Industry Standard CLI, and PoE options make the DGS-1510 Series ideal for Small-Medium Enterprise environments. Fully‑Featured with Layer 3 Traffic Management The DGS-1510 family has advanced network management options, accessible via Industry Standard CLI, Serial Port Console or the Web-based UI, that equip your business with network capabilities such as VLANs, multiple spanning tree protocol (MSTP), link aggregation (LACP), static routing, multiple firmware images,and multiple configuration files. 10G SFP+ Stacking Create a physical stack of up to 6 units in a fault‑tolerant ring or linear topology using Direct Attach Cables or any compatible SFP+ transceivers for a total of 288 Gigabit ports. The remaining uplink ports can be used for other functions, offering 10G connectivity to core networks and servers. 1 With powerful security features like IGMP snooping, access control lists, port security, and the unique D-Link Safeguard Engine that protects your network against malicious denial-of-service attacks from broadcast, multicast and unicast flooding, the DGS-1510 family is a versatile solution for enterprise network environments.  Max PoE with budgets up to 740W 2 Choose between 193W and 370W power budget options. Or utilise a total of 740W when adding a redundant power supply to the DGS-1510-52XMP. Free Network Design and Management Software D-Link’s free Network Assistant (DNA) displays all connected devices and speeds up the first time configuration. The free D-View 7 Network Management System comes with a license for 25 nodes and 2 probes and full access to the management tools. Optional upgrade licenses allow you to broaden your network and analysis. Smart Energy‑Saving Design D-Link Green technology enables the DGS-1510 series to save power without sacrificing performance. The entire series of switches feature a smart fan that adjusts fan-speed and only powers on above a certain temperature. With advanced silicon technology, the DGS-1510 series saves up to 73% of energy compared to normal switches. Tolly-Certified Tolly, a leading global provider of third-party validation services for vendors of IT products and services, independently tested and verified the outstanding performance of the DGS-1510-28X. “The D-Link Systems switch matched the L2 throughput of the other switches. In addition, the D-Link has a significantly lower purchase price and consumes much less power than the other switches evaluated.” Specifications 1000Base-T Interface 24 10G SFP+ Interface 4 Auto MDI/MDIX Yes Console Port Yes 10/100/1000BASE-T ports 24 10G SFP+ ports 4 Max. Packet Forwarding Rate 95.24 Mpps Switch Capacity 128 Gbps Store & Forwarding Forwading Yes Dimension 440mm x 210mm x 44mm Weight 2.00 kg Operation Temperature -5 -50°C Storage Temperature -20-70°C Operation Humidity 0% ~ 95% RH Storage Humidity 0% ~ 95% RH Maximum Power Consumption 22.3 W Standby Power Consumption 14.6 W/100V, 15.2 W/240V Maximum Heat Dissipation 76.04 BTU/hr Acoustic 42.7 dB(A) MTBF 516,593 hours Power Input 100 - 240 VAC CPU Speed 400MHz DRAM Size 256MB Flash Memory Size 32MB Packet Buffer Size 1.5MB FAN 1 DC Fan Comply with RoHS 6 Yes Energy Efficiency Ethernet (EEE) Yes Power Saving By Link Status Yes Power Saving By LED Shut-Off Yes Power Saving By Port Shut-Off Yes Power Saving By System Hibernation Yes Physical Stacking Yes Physical Stacking Bandwidth 40 G Units Per Physical Stack 6 D-Link Single IP Management (SIM) Yes Units Per SIM Stack 32 MAC Address Table Size 16384 Black Hole MAC Address Yes 802.3x Flow Control Yes Head-of-line (HOL) Blocking Prevention Yes 802.1D Spanning Tree (STP) Yes 802.1w Rapid Spanning Tree (RSTP) Yes 802.1s Multiple Spanning Tree (MSTP) Yes Root Restriction Yes G.8032 ERPS Yes 802.1AX Link Aggregation Yes 802.3ad Link Aggregation Yes Link Aggregation Group Per Device 32 Max Port Per Link Aggregation Group 8 Port Mirroring Yes Flow-based (ACL) mirroring Yes Jumbo Frame 9216 Loopback Detection (LBD) Yes IGMP Snooping Yes Max IGMP Snooping Groups 512 IGMP Snooping Fast Leave Yes IGMP Proxy Reporting Yes MLD Snooping Yes MLD Snooping Groups Yes MLD Snooping Fast Leave Yes MLD Proxy Reporting Yes 802.1Q VLAN Yes VLAN Groups 4094 Port-based VLAN Yes 802.1v Protocol-based VLAN Yes MAC-based VLAN Yes Voice VLAN Yes Auto Surveillance VLAN Yes, 2.1 GVRP Yes Asymmetric VLAN Yes IP Interface Yes Max Number of IP Interface 16 ARP Yes ARP Entries 512 Gratuitous ARP Yes ND Entries Yes UDP Helper Yes Default Route Yes Static Route Yes Number of Queue 8 Class of Service (CoS) Yes Remark 802.1p priority Yes Remark ToS/DSCP Yes Rate Limiting Yes Queue Handling Yes Strict Priority Queue (SPQ) Yes Weighted Round Robin (WRR) Yes Deficit Round Robin (DRR) Yes SPQ + WRR Yes Port-based Bandwidth Control Yes Max Access Control List (ACL) Entries Yes MAC Access List Yes IP Access List Yes IPv6 Access List Yes Time based ACL Yes SSH Yes SSL Yes Port Security Yes Broadcast/Multicast/Unicast Storm Control Yes Traffic Segmentation Yes IP Source Guard Yes DHCP Snooping Yes IPv6 Snooping Yes Dynamic ARP Inspection (DAI) Yes DHCPv6 Guard Yes IPv6 Route Advertisement (RA) Guard Yes IPv6 ND Inspection Yes Duplicate Address Detection (DAD) Yes D-Link Safeguard Engine Yes DHCP Server Screening Yes ARP Spoofing Prevention Yes BPDU Attack Protection Yes DoS Attack Prevention Yes 802.1X Yes Port based 802.1X Authentication Yes Host based 802.1X Authentication Yes Identity Driven 802.1X Policy Assignment Yes Web-based Access Control (WAC) Yes Port based WAC Authentication Yes Host based WAC Authentication Yes Identity Driven WAC Policy Assignment Yes Japanese Web-based Access Control (JWAC) Yes Port based JWAC Authentication Yes Host based JWAC Authentication Yes Identity Driven JWAC Policy Assignment Yes MAC-based Access Control (MAC) Yes Port based MAC Authentication Yes Host based MAC Authentication Yes Identity Driven MAC Policy Assignment Yes Compound Authentication Yes Guest VLAN Yes Authentication for Management Access Yes Privilege Level for Management Access 5 RADIUS Yes RADIUS Accounting Yes TACACS+ Yes TACACS+ Accounting Yes Optical Transceiver Digital Diagnostic Monitoring (DDM) Yes Cable Diagnostics Yes Network Time Protocol (NTP) Yes Simple Network Time Protocol (SNTP) Yes Web-based GUI Yes Command Line Interface (CLI) Yes Telnet Server Yes Telnet Client Yes SNMP Yes SNMP Trap Yes TFTP Client Yes ZModem Yes System Log Yes RMONv1 Yes LLDP Yes LLDP-MED Yes D-Link Discover Protocol (DDP) Yes (v0.25) DHCP/BootP Client Yes DHCP Auto-configuration Yes DHCP relay Yes Flash file system Yes Multiple Images Yes Multiple Configurations Yes Editable Login Banner Yes Editable System Prompt Yes DNS Client Yes Debug Command Yes Password Encryption Yes Ping Yes Traceroute Yes sFlow Yes D-Link Network Assistant Yes Smart Wizard Yes SSH Yes SSL Yes

Description: Details iShopping.pk brings you the best price for TP-Link JetStream 24-Port Gigabit L2 Managed Switch with 4 SFP Slots (TL-SG3428-V1) with express shipping all over Pakistan.   Details: Full Gigabit Ports: 24× gigabit RJ45 ports and 4× gigabit SFP Slots provide high-speed connections. Integrated into Omada SDN: Zero-Touch Provisioning (ZTP)*, Centralized Cloud Management, and Intelligent Monitoring. Centralized Management: Cloud access and Omada app for ultra-convenience and easy management. Static Routing: Helps route internal traffic for more efficient use of network resources. Robust Security Strategies: IP-MAC-Port Binding, ACL, Port Security, DoS Defend, Storm control, DHCP Snooping, 802.1X, Radius Authentication, and more. Optimize Voice and Video Applications: L2/L3/L4 QoS and IGMP snooping. Standalone Management: Web, CLI (Console Port, Telnet, SSH), SNMP, RMON, and Dual Image bring powerful management capabilities Software Defined Networking (SDN) with Cloud Access Omada’s Software Defined Networking (SDN) platform integrates network devices, including access points, switches and gateways, providing 100% centralized cloud management. Omada creates a highly scalable network—all controlled from a single interface. Seamless wireless and wired connections are provided, ideal for use in hospitality, education, retail, offices, and more. Secure Networking Security features include IP-MAC-Port-VID Binding, Port Security, Storm Control, and DHCP Snooping to defend against a range of network threats. An integrated list of common DoS attacks is available, making it easier than ever to prevent them. In addition, the Access Control Lists (ACL, L2 to L4) feature restricts access to sensitive network resources by denying packets based on source and destination MAC address, IP address, TCP/UDP ports, or VLAN ID. Users’ network access can be controlled via 802.1X authentication, which works with a RADIUS/Tacacs+ server to grant access only when valid user credentials are provided. Advanced QoS Voice and video traffic can be prioritized based on IP address, MAC address, TCP port number, UDP port number, and more. With QoS (Quality of Service), voice and video services remain smooth, even when bandwidth is in short supply. Abundant L2 and L2+ Features A complete lineup of L2 features are supported including 802.1Q VLAN, Port Mirroring, STP/RSTP/MSTP, Link Aggregation Control Protocol, and 802.3x Flow Control. Advanced IGMP Snooping ensures the switch intelligently forwards multicast streams to only the appropriate subscribers, cutting out unnecessary traffic, while IGMP throttling & filtering restrict each subscriber on a port level to prevent unauthorized multicast access. Static Routing is a simple way of segmenting the network and internally routs traffic through the switch for improved efficiency. ISP Features QinQ, L2PT, PPPoE ID Insertion, and IGMP authentication features are provided, developed with service providers in mind. 802.3ah OAM and Device Link Detection Protocol (DLDP) offer easy monitoring and troubleshooting of Ethernet links. IPv6 Support IPv6 functions such as Dual IPv4/IPv6 Stack, MLD Snooping, IPv6 ACL, DHCPv6 Snooping, IPv6 Interface, Path Maximum Transmission Unit (PMTU) Discovery and IPv6 Neighbor Discover guarantee your network is ready for the Next Generation Network (NGN) without upgrading your hardware. Enterprise Level Management Features Easy to manage via an intuitive web-based Graphical User Interface (GUI) or an industry-standard Command Line Interface (CLI). For both management methods, traffic is protected through SSL or SSH encryption. SNMP (v1/v2c/v3) and RMON support enables the switch to be polled for valuable status information and to send traps on abnormal events.   Specifications: HARDWARE FEATURES Interface • 24× 10/100/1000 Mbps RJ45 Ports • 4× Gigabit SFP Slots • 1× RJ45 Console Port • 1× Micro-USB Console Port Fan Quantity Fanless Power Supply 100-240 V AC~50/60 Hz Dimensions (W x D x H) 17.3 × 7.1 × 1.7 in (440 × 180 × 44 mm) Mounting Rack Mountable Max Power Consumption 19.22 W (110 V/60 Hz) Max Heat Dissipation 65.58 BTU/h (110 V/60 Hz) PERFORMANCE Switching Capacity 56 Gbps Packet Forwarding Rate 41.66 Mpps MAC Address Table 8K Jumbo Frame 9 KB SOFTWARE FEATURES Quality of Service • 8 priority queues • 802.1p CoS/DSCP priority • Queue scheduling - SP (Strict Priority) - WRR (Weighted Round Robin) - SP+WRR • Bandwidth Control - Port/Flow based Rating Limiting • Smoother Performance • Action for Flows - Mirror (to supported interface) - Redirect (to supported interface) - Rate Limit - QoS Remark L2 and L2+ Features • Link Aggregation - Static link aggregation - 802.3ad LACP - Up to 8 aggregation groups and up to 8 ports per group • Spanning Tree Protocol - 802.1d STP - 802.1w RSTP - 802.1s MSTP - STP Security: TC Protect, BPDU Filter, BPDU Protect, Root Protect, Loop Protect • Loopback Detection - Port-based - VLAN based • Flow Control - 802.3x Flow Control - HOL Blocking Prevention • Mirroring - Port Mirroring - CPU Mirroring - One-to-One - Many-to-One - Tx/Rx/Both L2 Multicast • Supports 511 (IPv4, IPv6) IGMP groups • IGMP Snooping - IGMP v1/v2/v3 Snooping - Fast Leave - IGMP Snooping Querier - IGMP Authentication • IGMP Authentication • MVR • MLD Snooping - MLD v1/v2 Snooping - Fast Leave - MLD Snooping Querier - Static Group Config - Limited IP Multicast • Multicast Filtering: 256 profiles and 16 entries per profile VLAN • VLAN Group - Max 4K VLAN Groups • 802.1q Tagged VLAN • MAC VLAN: 12 Entries • Protocol VLAN: Protocol Template 16, Protocol VLAN 16 • GVRP • VLAN VPN (QinQ) - Port-Based QinQ - Selective QinQ • Voice VLAN Access Control List • Time-based ACL • MAC ACL - Source MAC - Destination MAC - VLAN ID - User Priority - Ether Type • IP ACL - Source IP - Destination IP - Fragment - IP Protocol - TCP Flag - TCP/UDP Port - DSCP/IP TOS - User Priority • Combined ACL • Packet Content ACL • IPv6 ACL • Policy - Mirroring - Redirect - Rate Limit - QoS Remark • ACL apply to Port/VLAN Security • IP-MAC-Port Binding - DHCP Snooping - ARP Inspection - IPv4 Source Guard • IPv6-MAC-Port Binding - DHCPv6 Snooping - ND Detection - IPv6 Source Guard • DoS Defend • Static/Dynamic Port Security - Up to 64 MAC addresses per port • Broadcast/Multicast/Unicast Storm Control - kbps/ratio/pps control mode • IP/Port/MAC based access control • 802.1X - Port based authentication - Mac based authentication - VLAN Assignment - MAB - Guest VLAN - Support Radius authentication and accountability • AAA (including TACACS+) • Port Isolation • Secure web management through HTTPS with SSLv3/TLS 1.2 • Secure Command Line Interface (CLI) management with SSHv1/SSHv2 IPv6 • IPv6 Dual IPv4/IPv6 • Multicast Listener Discovery (MLD) Snooping • IPv6 ACL • IPv6 Interface • Static IPv6 Routing • IPv6 neighbor discovery (ND) • Path maximum transmission unit (MTU) discovery • Internet Control Message Protocol (ICMP) version 6 • TCPv6/UDPv6 • IPv6 applications - DHCPv6 Client - Ping6 - Tracert6 - Telnet (v6) - IPv6 SNMP - IPv6 SSH - IPv6 SSL - Http/Https - IPv6 TFTP L3 Features • 16 IPv4/IPv6 Interfaces • Static Routing - 48 static routes • Static ARP • 316 ARP Entries • Proxy ARP • Gratuitous ARP • DHCP Server • DHCP Relay • DHCP L2 Relay Management • Web-based GUI • Command Line Interface (CLI) through console port, telnet • SNMPv1/v2c/v3 - Trap/Inform - RMON (1, 2, 3, 9 groups) • SDM Template • DHCP/BOOTP Client • 802.1ab LLDP/LLDP-MED • DHCP AutoInstall • Dual Image, Dual Configuration • CPU Monitoring • Cable Diagnostics • EEE • Password Recovery • SNTP • System Log Advanced Features • Support Omada Hardware Controller (OC200/OC300), Software Controller, Cloud-Based Controller • Automatic Device Discovery • Batch Configuration • Batch Firmware Upgrading • Intelligent Network Monitoring • Abnormal Event Warnings • Unified Configuration • Reboot Schedule • ZTP (Zero-Touch Provisioning)* OTHERS Certification CE, FCC, RoHS Environment • Operating Temperature: 0–45 ℃ (32–113 ℉); • Storage Temperature: -40–70 ℃ (-40–158 ℉) • Operating Humidity: 10–90% RH non-condensing • Storage Humidity: 5–90% RH non-condensing

Specifications   1000Base-T PoE Interface 24 Combo 1000Base-T/SFP 4 Auto MDI/MDIX Yes 10/100/1000BASE-T PoE ports 24 Combo 10/100/1000BASE-T/SFP ports 4 Switch Capacity 56 Gbps Max. Packet Forwarding Rate 41.7 Mpps Store & Forwarding Forwading Yes Dimension 440mm x 250 mm x 44mm Weight 3.94 kg Operation Temperature -5 - 50°C Storage Temperature -20-70°C Operation Humidity 0% - 95% RH Storage Humidity 0% ~ 95% RH Operating Altitude 1500 meters Maximum Power Consumption PoE on 446.1 W/100 V 424.8 W/240 V PoE off 29.8 W/100 V 29.0 W/240 V Standby Power Consumption 18.5 W/100V / 17.1 W/240V Maximum Heat Dissipation 1521.99 BTU/hr (100 V) 1449.49 BTU/hr (240 V) MTBF 277,967 hours Power Input 100-240 VAC CPU Speed 500MHz Flash Memory Size 32MB Packet Buffer Size 4.1MBits DRAM Size DDR3 128MB FAN Yes Comply with RoHS 6 Yes Energy Efficiency Ethernet (EEE) Yes Power Saving By Link Status Yes Power Saving By Cable Length Yes Power Saving By Port Shut-Off Yes Power Saving By System Hibernation Yes Time-based PoE Yes Maximum PoE Budget 370W PoE Budget 370 W 802.3x Flow Control Yes Head-of-line (HOL) Blocking Prevention Yes MAC Address Table Size 8K 802.1D Spanning Tree (STP) Yes 802.1w Rapid Spanning Tree (RSTP) Yes 802.1s Multiple Spanning Tree (MSTP) Yes Root Restriction Yes 802.3ad Link Aggregation Yes Link Aggregation Group Per Device 4 Max Port Per Link Aggregation Group 8 Port Mirroring Yes Jumbo Frame 10,000 Bytes Loopback Detection (LBD) Yes IGMP Snooping Yes Max IGMP Snooping Groups 256 IGMP Snooping Fast Leave Yes MLD Snooping Yes MLD Snooping Groups Yes MLD Snooping Fast Leave Yes 802.1Q VLAN Yes VLAN Groups Yes Port-based VLAN Yes Voice VLAN Yes Auto Surveillance VLAN Yes Asymmetric VLAN Yes ARP Yes IP Interface Yes Max Number of IP Interface 4 ARP Entries Yes IPv6 Neighbor Discovery (ND) Yes ND Entries 128 Default Route Yes Static Route Yes Number of Queue Yes Class of Service (CoS) Yes Strict Priority Queue (SPQ) Yes Weighted Round Robin (WRR) Yes Port-based Bandwidth Control Yes Max Access Control List (ACL) Entries Yes MAC Access List Yes IP Access List Yes IPv6 Access List Yes SSH Yes SSL Yes (only support TLS 1.0) Port Security Yes Broadcast/Multicast/Unicast Storm Control Yes Traffic Segmentation Yes Smart IP-MAC-Port Binding (Smart IMPB) Yes D-Link Safeguard Engine Yes DHCP Server Screening Yes ARP Spoofing Prevention Yes DoS Attack Prevention Yes 802.1X Yes Port based 802.1X Authentication Yes Authentication for Management Access Yes RADIUS Yes Trusted Host Yes Cable Diagnostics Yes Simple Network Time Protocol (SNTP) Yes Web-based GUI Yes SNMP Yes SNMP Trap Yes Telnet Server Yes RMONv1 Yes TFTP Client Yes System Log Yes D-Link Discover Protocol (DDP) Yes (v0.26) LLDP-MED Yes LLDP Yes DHCP relay Yes DHCP/BootP Client Yes Dual Images Yes D-Link Network Assistant Yes (Chrome edition) Ping Yes Debug Command Yes Dual Configurations Yes Smart Wizard Yes

Description: Details iShopping.pk brings you the best price for TP-Link 8-Port Gigabit Easy Smart Switch with 4-Port PoE (TL-SG108PE) with express shipping all over Pakistan.   Features: • 8 10/100/1000Mbps ports provide instant large file transfers •  Equipped with 4 802.3af PoE ports with up to 15.4W for each port •  Supports PoE power up to 55W for all PoE ports •  IEEE 802.3x flow control provides reliable data transfers •  15KB Jumbo frame improves performance of large data transfers •  Effective network monitoring via Port Mirroring, Loop Prevention and Cable Diagnostics •  Port/802.1p/DSCP QoS enable smooth latency-sensitive traffic •  Abundant VLAN features improve network security via traffic segmentation •  IGMP Snooping optimizes multicast applications •  Web-based user interface and Easy Smart Configuration Utility simplify configuration •  With 4 PoE ports, data and power can be transferred on one single cable •  Provides network monitoring, traffic prioritization and VLAN features •  Simple network set-up on top of plug-and-play connectivity   Specification: HARDWARE Standards and Protocols IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3af,  IEEE 802.3x, IEEE 802.1q, IEEE 802.1p Interface 8 10/100/1000Mbps RJ45 Ports AUTO Negotiation/AUTO MDI/MDIX Network Interface 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 100BASE-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Number of fans Fanless Food External Power Adapter(Output: 48VDC / 1.25A) Consumption Maximum (PoE on): 65.2W (220V/50Hz) Maximum (PoE off): 5.2W (220V/50Hz) Ports PoE+ Ports PoE Standard: 802.3 af compliant PoE Ports: Port 1- Port 4 PoE Power Budget: 55W PERFORMANCES Switching capacity 16Gbps Packet transfer rate 11.9Mpps MAC address table 4K Packet buffer memory 1.5Mb Jumbo Frame 15KB SOFTWARE Quality of Service QoS Support Port-Based/802.1p/DSCP priority Support 4 priority queues Rate Limit Storm Control Functions N2 IGMP Snooping V1/V2/V3 Link Aggregation Port Mirroring Cable Diagnostics Loop Prevention VLAN Supports up to 32 VLANs simultaneously (out of 4K VLAN IDs) MTU/Port/Tag VLAN Administration Web-based GUI Easy Smart Configuration Utility Transmission method Store-And-Forward OTHER Certification FCC, CE, RoHS System Requirements Microsoft® Windows® for running Utility Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90%RH non-condensing Storage Humidity: 5%~95%RH non-condensing   What This Product Does The TL-SG108PE is an 8-port Gigabit Easy Smart Switch with 4 PoE ports, represents a powerful upgrade from an unmanaged switch. It is designed speci­cally for small businesses that require simple network management and PoE function. The TL-SG108PE can connect and power up to four PoE devices, such as wireless access points (APs), IP cameras, and IP phones. Through its web-based user interface and management utility, the TL-SG108PE offers a variety of useful features, including network monitoring, traf­c prioritization, and enhanced QoS. Additionally, with port-based, tag-based and MTU VLAN, TL-SG108PE can improve security and meet more network segmentation requirements.   Power Over Ethernet 4 of the 8 Auto-Negotiation RJ45 ports (port 1 to port 4) of the switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af compliant Powered Devices (PDs).   Effective Management TL-SG108PE offers network monitoring for users to observe traf­c behavior. Through its web-based user interface and management utility, the TL-SG108PE offers a variety of useful features, including network monitoring, traf­c prioritization, and enhanced QoS. With Port Mirroring, Loop Prevention and Cable Diagnostics features, TL-SG108PE can identify and even locate connection problems on your business network. Moreover, administrators can designate the priority of the traf­c based on Port Priority, 802.1P Priority and DSCP Priority, to ensure that voice and video are always clear, smooth and lag-free. Additionally, to improve security and network performance, TL-SG108PE supports MTU VLAN, port-based VLAN and 802.1Q-based VLAN functions. TL-SG108PE is an upgrade from the plug-and-play Unmanaged Switch, delivering great value while empowering your network and similarly delivering great value to the end user.   Easy to Use The TL-SG108PE is easy to use and manage. Auto MDI/MDI-X crossover on all ports eliminates the need for crossover cables and uplink ports. Auto-negotiation on each port senses the link speed of a network device (either 10, 100, or 1000 Mbps) and intelligently adapts to promote compatibility and optimize performance. The convenient, compact size makes it ideal for desktops with limited space. Active LED indicators provide real-time status feedback and basic error diagnostics.

Description: Details iShopping.pk brings you the best price for TP-Link 16-Port Gigabit Desktop/Rackmount Switch (TL-SG1016D) with express shipping all over Pakistan.   Features: • 16 10/100/1000Mbps ports •  Supports MAC address self-learning, Auto MDI/MDIX and Auto negotiation •  Plug & play design • Innovative energy-efficient technology saves power consumption • Supports IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode • Non-blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput • 32Gbps Switching Capacity • 10KB Jumbo frame improves performance of large data transfers • Auto-MDI/MDIX eliminates the need for crossover cables • Supports MAC address auto-learning and auto-aging • Store and forward Switching scheme • Auto-negotiation ports provide smart integration between 10Mbps, 100Mbps and 1000Mbps hardware. • Plug and Play design simplifies installation   Specifications: HARDWARE Standards and Protocols IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x Interface 16 10/100/1000Mbps RJ45 Ports (Auto Negotiation/Auto MDI/MDIX) Network Media 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) 100BASE-TX/1000BASE-T: UTP category 5, 5e or above cable (maximum 100m) Fan Quantity Fanless Power Supply 100-240VAC, 50/60Hz Power Consumption Maximum: 13.3W (220V/50Hz) Dimensions (W x D x H) 11.6*7.1*1.7 in. (294*180*44 mm) PERFORMANCE Switching Capacity 32Gbps Packet Forwarding Rate 23.8Mpps MAC Address Table 8K Jumbo Frame 10KB Green Technology Innovative energy-efficient technology saves power up to 15% Transfer Method Store-and-Forward OTHERS Certification FCC, CE, RoHs System Requirements Microsoft® Windows® XP, Vista™, Windows 7 or Windows 8, MAC® OS, NetWare®, UNIX® or Linux. Environment                           Operating Temperature: 0℃~40℃ (32℉~104℉); Storage Temperature: -40℃~70℃ (-40℉~158℉); Operating Humidity: 10%~90% non-condensing; Storage Humidity: 5%~90% non-condensing   You now have the choice to go green when upgrading to a gigabit network! This new generation TL-SG1016D 16-Port Gigabit Switch features the latest innovative energy-efficient technologies that can greatly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status and cable length to limit the carbon footprint of your network.   Power down Idle Ports  When a computer or network equipment is off, the corresponding port of a traditional switch will continue to consume considerable amounts of power. The TL-SG1016D can automatically detect the link status of each port and reduce the power consumption of ports that are idle.   Power Budget According to Cable Length  Ideally, shorter cables would use less power because of less power degradation over their length; this is not the case with most devices as they will use the same amount of power across the cable regardless of whether it is 10 or 50 meters (32.8 or 164.0 feet)in length. The TL-SG1016D analyzes the length of the Ethernet cable connected and adjusts the power usage accordingly, rather than keeping the power consumption in a conventional solution. The auto features of this gigabit switch make installation plug and play and hassle-free. No configuring is required. Auto MDI/MDIX eliminates the need for crossover cables. Auto-negotiation on each port senses the link speed of a network device (10, 100, or 1000 Mbps) and intelligently adjusts for compatibility and optimal performance. The TL-SG1016D 16-Port Gigabit switch provides an easy way to make the transition to Gigabit Ethernet. All 16 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play. Moreover, with the innovative energy-efficient technology, the TL-SG1016D can save up to 40%* of the power consumption, making it an eco-friendly solution for your business network. Featured with 16 10/100/1000Mbps ports, TL-SG1016D greatly expands your network capacity, enabling instant large files transferring. So，power users in the home, office, workgroup, or creative production environment can now move large, bandwidth-intensive files faster. Transfer graphics, CGI, CAD, or multimedia files across the network instantly.

You now have the choice to go green when upgrading to a gigabit network! This new generation TL-SG1016D 16-Port Gigabit Switch features the latest innovative energy-efficient technologies that can greatly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status and cable length to limit the carbon footprint of your network. Power down Idle Ports  When a computer or network equipment is off, the corresponding port of a traditional switch will continue to consume considerable amounts of power. The TL-SG1016D can automatically detect the link status of each port and reduce the power consumption of ports that are idle. Power Budget According to Cable Length  Ideally, shorter cables would use less power because of less power degradation over their length; this is not the case with most devices as they will use the same amount of power across the cable regardless of whether it is 10 or 50 meters (32.8 or 164.0 feet)in length. The TL-SG1016D analyzes the length of the Ethernet cable connected and adjusts the power usage accordingly, rather than keeping the power consumption in a conventional solution. The auto features of this gigabit switch make installation plug and play and hassle-free. No configuring is required. Auto MDI/MDIX eliminates the need for crossover cables. Auto-negotiation on each port senses the link speed of a network device (10, 100, or 1000 Mbps) and intelligently adjusts for compatibility and optimal performance. * Maximum power savings when compared to a TP-LINK conventional switch, the real saving rate may vary based on the usage condition. The TL-SG1016D 16-Port Gigabit switch provides an easy way to make the transition to Gigabit Ethernet. All 16 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play. Moreover, with the innovative energy-efficient technology, the TL-SG1016D can save up to 40%* of the power consumption, making it an eco-friendly solution for your business network. Featured with 16 10/100/1000Mbps ports, TL-SG1016D greatly expands your network capacity, enabling instant large files transferring. So,power users in the home, office, workgroup, or creative production environment can now move large, bandwidth-intensive files faster. Transfer graphics, CGI, CAD, or multimedia files across the network instantly. 

D-Link DGS-1016D 16-Port 10/100/1000 Switch Get the blazing speed of Gigabit Ethernet with the DGS-1016D 16-Port 10/100/1000 Switch from D-Link, a 16-port 10/100/1000Mb/s switch that delivers power, performance and reliability in one cost-effective, space-saving design. Increase the speed of your network server and backbone connections, or make Gigabit to the desktop a reality. Power users in the office or creative production environment can now move large, bandwidth-intensive files faster. Transfer graphics, CGI, CAD, or multimedia files across the network near instantly. This switch features D-Link Green eco-friendly technology, which reduces power consumption and operating costs, all in a desktop or rack mountable design. Easy To Use The auto features of the DGS-1016D make installation plug-and-play and hassle-free; no configuration required! Auto MDI/MDI-X crossover on all ports eliminate the need for crossover cables or uplink ports. Auto-negotiation on each port senses the link speed of a network device (10, 100 or 1000Mb/s) and intelligently adjusts for optimal performance. The DGS-1016D also features diagnostic LEDs which display status and activity, allowing you to quickly detect and correct problems on the network. Every port also supports a cable diagnostic feature that helps to detect cable related issues. Power-Packed It features a non-blocking switching architecture that filters and forwards packets at full wire-speed for maximum throughput. An 8K MAC address table provides scalability for even the largest networks. Address learning and aging, 802.3x Flow Control for full-duplex mode, and back pressure flow control for half-duplex mode alleviates traffic congestion and ensures reliable data transmission. Designed using industry standards, the DGS-1016D is compatible with virtually all 10, 100 and 1000Mb/s Ethernet devices and other vendor equipment. The 16-Port 10/100/1000 Switch protects your existing network investments while providing you with a straightforward migration path to faster Gigabit speeds. Power Savings by Number of Connected Ports and Link Status Computers do not require Internet access all the time; neither do switches utilize all ports at all times. When a computer or network equipment is shut down, switches often remain on and continue to consume considerable amounts of power. With D-Link Green Technology, D-Link switches can automatically detect link status and reduce power usage of ports that are idle. Computers or any connecting parties set to standby mode (not power off), however, will not provide significant power savings. Power Savings by Cable Length D-Link Green verified switches have the ability to analyze the length of any Ethernet cable connected to them for adjustment of power usage accordingly. Shorter lengths require less power. Overall Power Savings Per Day For a traditional switch, power consumption remains constant even when the ports are not in use. In a standard workday scenario where PCs are used for 10 hours a day and powered off 14 hours a day, and connected to the switch using 20 meter cables, D-Link Green Technology can save up to 20% power used for each system. Specs   Protocols Transmission Method Store-and-Forward MAC Address Table Size 8K Standards Supported IEEE Standards 802.1p, 802.3, 802.3ab, 802.3u, 802.3x Performance Switching Bandwidth 32 Gb/s  Priority Queues 4 Packet Buffer 512 Kb Electrical AC Input Power 100 to 240 VAC, 50 / 60 Hz Power Supply Type Internal Environmental Operating Temperature 32 to 104°F / 0 to 40°C Operating Humidity 5 to 95% Storage Temperature 14 to 131°F / -10 to 55°C General Indicator Lights Link/Activity, Power, Speed Dimensions 11 x 7.1 x 1.7" / 28 x 18 x 4.4 cm Weight 4 lb / 2 kg

TP-Link TL-SG1005D 5-Port Gigabit Desktop Switch Price in Pakistan 5 Gigabit Auto-Negotiation RJ45 ports, Supports Auto MDI / MDIX Green Ethernet technology saves power consumption IEEE 802.3x flow control provides reliable data transfer Plastic case, desktop or wall-mounting design Plug and play, no configuration required What This Product Does The TP-Link 5-Port Gigabit desktop switch TL-SG1005D provides you an easy way to make the transition to Gigabit Ethernet. Increase the speed of your network server and backbone connections, or make Gigabit to the desktop a reality. Moreover, TL-SG1005D adopts lower power consumption design. With the innovative energy-efficient technology, the TL-SG1005D can save power consumption, making it an eco-friendly solution for your home or office network. Gigabit Switch Featured with 5 10/100/1000Mbps ports, TL-SG1005D greatly expands your network capacity, enabling instant large files transferring. So, power users in the home, office, workgroup, or creative production environment can now move large, bandwidth-intensive files faster. Transfer graphics, CGI, CAD, or multimedia files across the network instantly. Go Green With Your Ethernet You now have the choice to go green when upgrading to a gigabit network! This new generation TL-SG1005D 5-Port Gigabit Desktop Switch features the latest innovative energy-efficient technologies that can greatly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status and cable length to limit the carbon footprint of your network. Power down Idle Ports When a computer or network equipment is off, the corresponding port of a traditional switch will continue to consume considerable amounts of power. The TL-SG1005D can automatically detect the link status of each port and reduce the power consumption of ports that are idle. Power Budget According to Cable Length Ideally, shorter cable would use less power because of less power degradation over their length; this is not the case with most devices as they will use the same amount of power across the cable regardless of the length. Easy to Use The auto features of this gigabit switch make installation plug and play and hassle-free. No configuring is required. Auto MDI/MDIX eliminate the need for crossover cables. Auto-negotiation on each port senses the link speed of a network device (either 10, 100, or 1000 Mbps) and intelligently adjusts for compatibility and optimal performance.

Description: Details iShopping.pk brings you the best price for TP-Link 10/100Mbps WDM Media Converter (MC111CS) with express shipping all over Pakistan.   Specification: MEDIA CONVERTER & MODULE Standards and Protocols IEEE 802.3, IEEE 802.3u Basic Function Adopts WDM technology Half/Full-Duplex transfer mode for FX port minimize the loss caused by link failure timely Extends fiber distance up to 20km (12.5 miles) Ports 1 x 100M SC/UPC port 1 x 10/100M RJ45 port (Auto MDI/MDIX) Wave Length 1550nm Tx/1310nm Rx WDM TX 1550nm WDM RX 1310nm Network Media 10BASE-T UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Network Media 100BASE-T UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Network Media 100BASE-FX Single-mode Fiber LED Indicators PWR, Link/Act Dimensions (W*D*H) 3.7 x 2.9 x 1.1 in. (95 x 73 x 27 mm) Power Supply External Power Adapter Max Power Consumption 2.49W Safety & Emission FCC, CE, RoHS Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing   What This Product Does The MC111CS is a media converter designed to convert 100BASE-FX fiber to 10/100Base-TX copper media or vice versa. Adopting WDM technology, MC111CS takes only one fiber cable to transmit and receive data, which will half cable cost for you. Designed with IEEE 802.3u 100Base-TX and 100Base-FX standards, the MC111CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC111CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1550nm on transferring data and at 1310nm on receiving data. So the other end device to cooperate with the MC111CS should work at 1310nm on transferring data and at 1550nm on receiving data. Another TP-LINK´s media converter MC112CS is just one of the examples to cooperate with MC111CS. Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, and front panel status LEDs. The MC111CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers(12.5 miles).

Description: Details iShopping.pk brings you the best price for TP-Link 10/100Mbps WDM Media Converter (MC112CS) with 18 months official warranty express shipping all over Pakistan.   Specification: MEDIA CONVERTER & MODULE Standards and Protocols IEEE 802.3, IEEE 802.3u Basic Function Adopts WDM technology Half/Full-Duplex transfer mode for FX port minimize the loss caused by link failure timely Extends fiber distance up to 20km Ports 1 x 100M SC/UPC port 1 x 10/100M RJ45 port (Auto MDI/MDIX) Wave Length 1310nm Tx/1550nm Rx WDM TX 1310nm WDM RX 1550nm Network Media 10BASE-T UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Network Media 100BASE-T UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Network Media 100BASE-FX Single-mode Fiber LED Indicators PWR, Link/Act Dimensions (W*D*H) 3.7 x 2.9 x 1.1 in. (95 x 73 x 27 mm) Power Supply External Power Adapter Max Power Consumption 2.41W Safety & Emission FCC, CE, RoHS Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing   What This Product Does The MC112CS is a media converter designed to convert 100BASE-FX fiber to 10/100Base-TX copper media and vice versa. Adopting WDM technology, MC112CS takes only one fiber cable to transmit and receive data, which will save half cabling cost for you. Designed under IEEE 802.3u 100Base-TX and 100Base-FX standards, the MC112CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC112CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on transferring data and at 1550nm on receiving data. So the other end device to cooperate with the MC112CS should work at 1550nm on transferring data and at 1310nm on receiving data. Another TP-Link´s media converter MC111CS is just one of the examples to cooperate with MC112CS. Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port. The MC112CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers (12.5 miles).

Description: Details iShopping.pk brings you the best price for TP-Link 10/100Mbps WDM Media Converter (MC112CS) with express shipping all over Pakistan.   Specification: MEDIA CONVERTER & MODULE Standards and Protocols IEEE 802.3, IEEE 802.3u Basic Function Adopts WDM technology Half/Full-Duplex transfer mode for FX port minimize the loss caused by link failure timely Extends fiber distance up to 20km Ports 1 x 100M SC/UPC port 1 x 10/100M RJ45 port (Auto MDI/MDIX) Wave Length 1310nm Tx/1550nm Rx WDM TX 1310nm WDM RX 1550nm Network Media 10BASE-T UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Network Media 100BASE-T UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Network Media 100BASE-FX Single-mode Fiber LED Indicators PWR, Link/Act Dimensions (W*D*H) 3.7 x 2.9 x 1.1 in. (95 x 73 x 27 mm) Power Supply External Power Adapter Max Power Consumption 2.41W Safety & Emission FCC, CE, RoHS Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing   What This Product Does The MC112CS is a media converter designed to convert 100BASE-FX fiber to 10/100Base-TX copper media and vice versa. Adopting WDM technology, MC112CS takes only one fiber cable to transmit and receive data, which will save half cabling cost for you. Designed under IEEE 802.3u 100Base-TX and 100Base-FX standards, the MC112CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC112CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on transferring data and at 1550nm on receiving data. So the other end device to cooperate with the MC112CS should work at 1550nm on transferring data and at 1310nm on receiving data. Another TP-Link´s media converter MC111CS is just one of the examples to cooperate with MC112CS. Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port. The MC112CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers (12.5 miles).

Description: Details iShopping.pk brings you the best price for TP-Link 8-Port 10/100Mbps + 2-Port Gigabit Switch (TL-SL1210) with express shipping all over Pakistan   Features: • 8 10/100M RJ45 ports + 2 10/100/1000M RJ45 ports • Plug and Play design simplifies installation • Innovative energy-efficient technology saves power up to 75%   Specifications:  HARDWARE FEATURES Standards and Protocols IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab,, IEEE 802.3x Interface 8 10/100Mbps RJ45 Ports (Auto Negotiation/Auto MDI/MDIX) 2 10/100/1000Mbps RJ45 Ports (Auto Negotiation/Auto MDI/MDIX) Network Media 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) 100BASE-TX/1000BASE-T: UTP category 5, 5e or above cable (maximum 100m) Fan Quantity Fanless Power Supply 100-240VAC, 50/60Hz Dimensions (W x D x H) 11.6*7.1*1.7 in. (294*180*44 mm) PERFORMANCE Switching Capacity 5.6Gbps Packet Forwarding Rate 4.17Mpps MAC Address Table 8K Green Technology Innovative energy-efficient technology saves power up to 65% Transfer Method Store-and-Forward OTHERS Certification FCC, CE, RoHS Package Contents 8-Port 10/100Mbps + 8-Port Gigabit Switch0 Power Cord Installation Guide Rackmount Kit Rubber Feet System Requirements Microsoft® Windows® 98SE, NT, 2000, XP, Vista™, Windows 7 or Windows 8, MAC® OS, NetWare®, UNIX® or Linux. Environment Operating Temperature: 0℃~40℃ (32℉~104℉); Storage Temperature: -40℃~70℃ (-40℉~158℉); Operating Humidity: 10%~90% non-condensing; Storage Humidity: 5%~90% non-condensing   What This Product Does The TL-SL1210 with TP-LINK Green Technology is an Environmentally-friendly and competitive choice for small business. It provides 8 10/100Mps Auto-Negotiation RJ45 ports and 2 10/100/1000Mbps Auto-Negotiation RJ45 ports, all RJ45 ports Support Auto-MDI/MDIX function. TL-SL1210 Gigabit Switch provides a cost-effective, high performance, non-disruptive, smooth evolution into Gigabit solutions. The Switch delivers superior performance with improving workgroup, network bandwidth, increasing network node, providing the greater flexibility, installation convenience. Moreover, with the innovative energy-efficient technology, the TL-SL1210 can save up to 75% of the power consumption, making it an eco-friendly solution for your business network.  Gigabit Uplink The TL-SL1210 has 8 fast Ethernet ports and 2 Gigabit uplink port. The Gigabit uplink port provides bandwidth access of up to 1000Mbps. Due to the fact that network upgrades tend to be progressive over time, your network will tend to become mixed with both Fast 100Mbps Ethernet and Gigabit. TL-SL1210 is ideal for situations such as these to mitigate throughput issues and coordinate work efficiently; Allowing your organization retain most of your network investments, while enhancing network performance quickly.    Go Green With Your Ethernet You now have the choice to go green when upgrading to a gigabit network! This new product TL-SL1210 features the latest innovative energy-efficient technologies that can greatly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status and cable length to limit the carbon footprint of your network. Power down Idle Ports   When a computer or network equipment is off, the corresponding port of a traditional switch will continue to consume considerable amounts of power. The TL-SL1210 can automatically detect the link status of each port and reduce the power consumption of ports that are idle. Power Budget According to Cable Length   Ideally, shorter cables would use less power because of less power degradation over their length; this is not the case with most devices as they will use the same amount of power across the cable regardless of wheth More Efficient Utilizing non-blocking switching architecture, TL-SL1210 can forward and filter packets at full wire-speed for maximum throughput. Moreover, 100% data filtering rate eliminates all error packets and make your network work more efficiently.  Easy to Use When powered on, it can work automatically without any pre-set. All ports support Auto-Negotiation and Auto-MDI/MDIX function. Compact size shell make it ideal for desktops with limited space while it is also Rackmountable, convenient and safe. Dynamic LED lights provide real-time work status display and basic fault diagnosis.

TP-LINK MC112CS 10/100Mbps WDM Media Converter Price in Pakistan MEDIA CONVERTER & MODULE Standards and Protocols IEEE 802.3, IEEE 802.3u Basic Function Adopts WDM technology Half/Full-Duplex transfer mode for FX port minimize the loss caused by link failure timely Extends fiber distance up to 20km Ports 1 x 100M SC/UPC port 1 x 10/100M RJ45 port (Auto MDI/MDIX) Wave Length 1310nm Tx/1550nm Rx WDM TX 1310nm WDM RX 1550nm Network Media 10BASE-T UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100O STP (maximum 100m) Network Media 100BASE-T UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100O STP (maximum 100m) Network Media 100BASE-FX Single-mode Fiber LED Indicators PWR, Link/Act Dimensions (W*D*H) 3.7 x 2.9 x 1.1 in. (95 x 73 x 27 mm) Power Supply External Power Adapter Max Power Consumption 2.41W Safety & Emission FCC, CE, RoHS Package Contents • Media Converter MC112CS • Power Adapter • Installation Guide Environment Operating Temperature: 0?~40? (32?~104?) Storage Temperature: -40?~70? (-40?~158?) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing