Line microphone

Description: Details iShopping.pk brings you the best price for Revolabs Fusion 8-Channel Wireless Microphone System with express shipping all over Pakistan.   The   Fusion 8-Channel Telephony Hybrid with Wireless Microphone System   from   Revolabs   includes an 8-channel wireless receiver, 6 omnidirectional tabletop mics and 2 lapel mics with rechargeable batteries, a charger base, 2 power cables, and a remote control. It is designed to capture audio for video conferences or conference calls thanks to its built-in hybrid telephone. The system has 128-bit encryption to keep your signals safe and is GSA compliant.   FEATURES:   • Hybrid Telephone • 6 Wireless Omni Table Mics • 2 Wireless Lapel Mics • Audio for Video Conference • Acoustic Echo Cancellation • Noise Reduction • 128-Bit Encryption • Rechargeable Batteries with Charge Base • 100' Range of Operation   Specifications: Audio Channels 8 Radio Frequency 1920 to 1930 MHz Range of Operation 100' (30 m), Approximately, with No Obstructions  Out-of-Range Alarm Bandwidth 100 Hz to 6.8 kHz Base Station Power 24 V DC, 2.5 A Locking Power Connector 100-240 V, 50/60 Hz Connectors/Interfaces IR Remote Serial DB9 Sensor Audio Control RJ45 (Firmware Updates Only) Telephone Line/Telephone Set-In RJ11 Network RJ45 (Firmware Updates Only) Mic Level XLR Male Conference Out Auxiliary In/Out Line Level RCA Plug Record Out/Room Out Line Level RCA Plug Conference In/Out Line Level RCA Plug Charging Cradle Power 5 V DC, 2 A 100-240 V, 50-60 Hz Connectors 8 Proprietary 4-Pin Microphone Charge Jacks Microphone Battery Lithium Polymer Talk Time Up to 8 Hours Charge Time 2 Hours Encryption 128-Bit Proprietary (Per Mic Channel) RF Shield Yes, RF Armor Mute Mute Button for Muting and Pairing LED Indicator Mute Status, Pairing, Battery Charge Charging Proprietary 4-Pin

Description: Details iShopping.pk brings you the best price for Revolabs Fusion 8-Channel Wireless Microphone System with Gold RevoCARE with express shipping all over Pakistan.   The   Fusion 8-Channel Telephony Hybrid with Wireless Microphone System with Gold revoCARE   from   Revolabs   includes an 8-channel wireless receiver, 6 omnidirectional tabletop mics and 2 lapel mics with rechargeable batteries, a charger base, 2 power cables, and a remote control. It is designed to capture audio for video conferences or conference calls thanks to its built-in hybrid telephone. The system has 128-bit encryption to keep your signals safe and is GSA compliant.   FEATURES:   • Hybrid Telephone • 6 Wireless Omni Table Mics • 2 Wireless Lapel Mics • Audio for Video Conference • Acoustic Echo Cancellation • Noise Reduction • 128-Bit Encryption • Rechargeable Batteries with Charge Base • 100' Range of Operation • 3-Year Gold revoCARE Extended Service   Specifications: Audio Channels 8 Radio Frequency 1920 to 1930 MHz Range of Operation 100' (30 m), Approximately, with No Obstructions           Out-of-Range Alarm Bandwidth 100 Hz to 6.8 kHz Base Station Power 24 V DC, 2.5 A Locking Power Connector 100-240 V, 50/60 Hz Connectors/Interfaces IR Remote Serial DB9 Sensor Audio Control RJ45 (Firmware Updates Only) Telephone Line/Telephone Set-In RJ11 Network RJ45 (Firmware Updates Only) Mic Level XLR Male Conference Out Auxiliary In/Out Line Level RCA Plug Record Out/Room Out Line Level RCA Plug Conference In/Out Line Level RCA Plug Charging Cradle Power 5 V DC, 2 A 100-240 V, 50-60 Hz Connectors 8 Proprietary 4-Pin Microphone Charge Jacks Microphone Battery Lithium Polymer Talk Time Up to 8 Hours Charge Time 2 Hours Encryption 128-Bit Proprietary (Per Mic Channel) RF Shield Yes, RF Armor Mute Mute Button for Muting and Pairing LED Indicator Mute Status, Pairing, Battery Charge Charging Proprietary 4-Pin

Description: Details iShopping.pk brings you the best price for Revolabs Fusion 4-Channel Telephony Hybrid Microphone with express shipping all over Pakistan.   The Fusion 4-Channel Telephony Hybrid with Wireless Microphone System and Tabletop Dialer from Revolabs includes a 4-channel wireless receiver, 3 omnidirectional tabletop mics and 1 lapel mic with rechargeable batteries, a tabletop dialer, a charger base, 2 power cables, and a remote control. It is designed to capture audio for video conferences or conference calls thanks to its built-in hybrid telephone and dialer. The system has 128-bit encryption to keep your signals safe and is GSA compliant. The base station receiver can act as an audio mixer by allowing you to adjust the levels of each of its 4 channels. Its built-in acoustic echo cancellation and noise reduction features are designed to provide clear audio for your calls. The 4 microphones have built-in rechargeable batteries that can provide up to 8 hours of talk time on a 2-hour charge in the charger base. They have an approximate 100' range of operation from the base station, allowing for flexibility in placement and movement during your conferences. All of the microphones are RF shielded with Revolabs' RF Armor technology that reduces cell phone interference.   Specifications: Audio Channels 4 Radio Frequency 1920 to 1930 MHz Range of Operation 100' (30 m), Approximately, with No Obstructions  Out-of-Range Alarm Bandwidth 100 Hz to 6.8 kHz Base Station Power 24 V DC, 2.5 A Locking Power Connector 100-240 V, 50/60 Hz Connectors/Interfaces IR Remote Serial DB9 Sensor Audio Control RJ45 (Firmware Updates Only) Telephone Line/Telephone Set-In RJ11 Network RJ45 (Firmware Updates Only) Mic Level XLR Male Conference Out Auxiliary In/Out Line Level RCA Plug Record Out/Room Out Line Level RCA Plug Conference In/Out Line Level RCA Plug Charging Cradle Power 5 V DC, 2 A 100-240 V, 50-60 Hz Connectors 4 Proprietary 4-Pin Microphone Charge Jacks Microphone Battery Lithium Polymer Talk Time Up to 8 Hours Charge Time 2 Hours Encryption 128-Bit Proprietary (Per Mic Channel) RF Shield Yes, RF Armor Mute Mute Button for Muting and Pairing LED Indicator Mute Status, Pairing, Battery Charge Charging Proprietary 4-Pin

Description: Details iShopping.pk brings you the best price for Toa Electronics Wireless Neck Worn Microphone (IR-300M) with express shipping all over Pakistan.   The TOA IR-300M IR Wireless Neck Worn Microphone is intended to be used with the TOA Infrared Wireless microphone system. The microphone features an adjustable neck strap and a high quality condenser microphone with a wide frequency response. There are 2 user selectable frequency channels to choose from and the infrared light emission may be adjusted for best results.   Features: • Easy-to-wear, neck-suspended design • Lightweight body • Adjustable infrared light emission at 2 levels • Two selectable channel frequencies • Antibacterial treatment • Employs an electret condenser microphone unit • Low battery indicator • Can be used with a built-in microphone or external microphone • External MIC input level adjustment function allows for sensitivity adjustment • Color-coded ID stickers available   Specifications: Transducer Condenser Polar Pattern Cardioid Transmitter Neck Worn Bodypack Carrier Frequency Channel A: 3.100MHz  Channel B: 3.350MHz Range Approx. 20m (65 ft) (Power selector switch: H, line of sight)  Approx. 15m (50 ft) (Power selector switch: N, line of sight) Sensitivity +/- 4.8kHz (1kHz, when SPL of 84dB is input) SPL 120dB SPL Frequency Response 100Hz to 12kHz Power 2x AA Alkaline or Rechargeable Batteries  Up to 8 hours with rechargeable Up to 6 hours with alkaline Dimensions (WxHxD) 2.52 x 3.59 x 1.07" (64 x 91.3 x 27.3mm) Weight 0.29 lb (130 g)

Description: Details iShopping.pk brings you the best price for Toa Electronics Wireless Handheld Microphone (IR-200M) with express shipping all over Pakistan.   The TOA IR-200M IR Wireless Handheld Microphone is intended to be used with the TOA Infrared Wireless microphone system. The microphone features a high quality cardioid, condenser capsule with a wide frequency response. There are 2 user selectable frequency channels to choose from and the infrared light emission may be adjusted for best results.   Features: • Designed for stable voice transmission •  Lightweight body •  Adjustable infrared light emission at 2 levels •  Two selectable channel frequencies •  Antibacterial treatment •  Employs an electret condenser microphone unit •  Low battery indicator •  Color-coded ID stickers available   Specifications: Transducer Condenser Polar Pattern Cardioid Transmitter Infrared Handheld Carrier Frequency Channel A: 3.100MHz  Channel B: 3.350MHz Range Approx. 20m (65 ft) (Power selector switch: H, line of sight)  Approx. 15m (50 ft) (Power selector switch: N, line of sight) Sensitivity +/- 4.8kHz (1kHz, when SPL of 84dB is input) SPL 120dB SPL Frequency Response 100Hz to 12kHz Power 2x AA Alkaline or Rechargeable Batteries  Up to 8 hours with rechargeable Up to 6 hours with alkaline Dimensions (LxDiameter) 9.52 x 1.46" (241.8 x 37mm) Weight 0.37 lb (170 g)

Description: Details iShopping.pk brings you the best price for Sennheiser Lavailer Clip-On Wireless Microphone Set (XSW 12-C) with express shipping all over Pakistan.   Make your presentations come to life! Compact bodypack system, with omnidirectional lavalier mic, offering excellent speech intelligibility. Transmitter features an illuminated mute button, 10 hours of operation, and 960 tunable frequencies. Unobtrusive ME2-2 lapel mic provides natural speech reproduction. All-metal, True Diversity receiver offers intuitive scan and sync functions that ensure trouble-free operation. Rugged, reliable and easy-to-use, XS Wireless delivers renowned Sennheiser sound to small venues, conference rooms or houses of worship.   Features: • Easy-to-use, all-in-one package for singers, speakers and presenters •  e 835 sound to cut through high on-stage levels •  High feedback rejection •  Mute button for full speech control •  Synchronization via RF remote channel •  Frequencies tunable in steps of 25 kHz •  24 MHz bandwidth •  8 frequency banks with each max 12 presets   Specification: Technical Data RF frequency range 821...832 MHz / 863...865 MHz  766...790 MHz  614...638 MHz  606...630 MHz  548...572 MHz  548...865 MHz Presets 12 THD, total harmonic distortion Signal-to-noise ratio > 103 dB(A) Transmission/receiving frequencies 960 (520 in range E) Switching bandwidth 24 MHz (13 MHz in range E) Receivers Dimensions 200 x 127 x 42 mm Weight ~ 730 g Antenna connector 2 BNC, 50 Ω Audio output level (balanced) XLR: +14 dBu max Audio output level (unbalanced) Jack: +8 dBu max Diversity reception True Diversity Transmitter Dimensions 96 x 66 x 24 mm Frequency response Mic: 100...16000 Hz  Line: 60...16000 Hz Weight ~ 95g RF Output Power typ. 10 mW Operating Time 10h Power Suppy 2x AA Batteries Input Voltage Range 0.5 Vrms Clip-on Microphone Microphone permanent polarized Sound pressure level (SPL) 142 dB Weight ~ 240 g Transducer Principle permanently polarized condenser microphone Pick-up pattern Omni directional AF sensitivity 5 mV/Pa

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 880 8-Channel AEC Microphone Mixer with express shipping all over Pakistan.   The successor to the industry-leading XAP 800. As the flagship product in ClearOne's next-generation Converge™ Pro professional audio conferencing product line, the 880 is a complete audio system that delivers rich functionality with improved audio performance, enhanced management, and simplified configuration for audio conferencing and sound reinforcement applications.   Features: • Next-generation Acoustical Echo Cancellation •  Push-to-talk microphone compatibility •  Increased resolution on Microphone Preamp stage •  Integrated Ethernet and USB connections •  SNMP and HTML remote management agents •  20 Hz-22 kHz bandwidth for full-range audio response •  ALC & AGC keep participants' audio balanced and consistent Auto Mixer Parameters: •  Number of Open Microphones (NOM) •  PA Adaptive Mode •  First Mic Priority Mode •  Last Mic Mode •  Maximum # of Mics Mode •  Ambient Level •  Gate Threshold Adjust •  Off Attenuation Adjust •  Hold Time •  Decay Rate Matrix Mixing Parameters: • 12 analog in/out •  18 expansion bus in/out •  8 assignable processing blocks in/out •  4 assignable fader blocks in/out   Specifications: Physical Characteristics Height 1.8" Width 17.3" Depth 10.3" Weight (Approximate) 7.50 lb Miscellaneous Certifications & Standards AES48-2005                              CSA Listed Environmentally Friendly Yes Environmental Certification RoHS WEEE

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 128V Audio DSP Mixer with express shipping all over Pakistan.   The CONVERGE Pro 2 128V Audio DSP Mixer from ClearOne is a complete conferencing solution with 12 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in VoIP interface for 2 lines. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection. The mixer comes with built-in VoIP for VoIP conferencing. The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.   Features: Architecture • 12 mic/line inputs with AEC •  Built-in VoIP for 2 lines •  Built-in USB for PC-based conferencing Scalable Connectivity •  Standalone and daisy-chained system •  Stack up units up to 96 mic/line inputs •  Expansion bus C-Link with 64 channels •  P-Link bus to connect 6 peripherals Configuration & Management •  CONSOLE software •  Auto-discovery of devices •  Matrix View for entire system •  FlowView for visualized audio signal paths •  System monitoring and troubleshooting Audio Signal Processing •  Acoustic Echo Cancellation processing •  Distributed Echo Cancellation on every mic input •  Noise cancellation with Adaptive-Ambience •  Acoustic Intelligence with faster convergence •  DARE feedback elimination •  Microphone gating Flexible Control Options •  Dialer app for Windows, Mac, iOS, and Android •  Tabletop controller with a touch panel •  Wall controller with buttons •  Web-based controller Supports 3rd-party control modules   Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) VoIP Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation Audio: 5 lines (2 default + 3 lines through license), each line supporting 1+5 calls Sample Rate: 24 kHz Sample Bit Depth: 24-bit Codec: G.711 uLaw, G.711 ALaw, G.722 Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: Proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 48T Audio DSP Mixer with express shipping all over Pakistan.     The CONVERGE Pro 2 48T Audio DSP Mixer from ClearOne is a complete conferencing solution with 4 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in Telco interface for teleconferencing. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection.   The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.     Features: Architecture • 4 mic/line inputs with AEC •  Built-in Telco with ClearEffect processing •  Built-in USB for PC-based conferencing Scalable Connectivity •  Standalone and daisy-chained system •  Stack up units up to 96 mic/line inputs •  Expansion bus C-Link with 64 channels •  P-Link bus to connect 6 peripherals Configuration & Management •  CONSOLE software •  Auto-discovery of devices •  Matrix View for entire system •  FlowView for visualized audio signal paths •  System monitoring and troubleshooting Audio Signal Processing •  Acoustic Echo Cancellation processing •  Distributed Echo Cancellation on every mic input •  Noise cancellation with Adaptive-Ambience •  Acoustic Intelligence with faster convergence •  DARE feedback elimination •  Microphone gating Flexible Control Options •  Dialer app for Windows, Mac, iOS, and Android •  Tabletop controller with a touch panel •  Wall controller with buttons •  Web-based controller •  Supports 3rd-party control modules     Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Amplifier Output Speaker Output Port: Dual binding posts Audio: 2 x Channel Output Power: Maximum 10 W, 8 Ohms load Frequency Response: 20 Hz to 22 kHz @ +10 dBu, +/- 0.5 dBu THD + N: 20 Hz to 22 kHz @ +10 dBu, 1 W, Dynamic Range: 20 Hz to 22 kHz @ 20 dB, >102dB, with 20 kHz digital low pass filter Crosstalk: Channel to Channel, stimulus at 20 dBu, 10 W output to receptor 8⿦ load, 20 Hz to 22 kHz, Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 128T Audio DSP Mixer with express shipping all over Pakistan.   The CONVERGE Pro 2 128T Audio DSP Mixer from ClearOne is a complete conferencing solution with 12 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in Telco interface for teleconferencing. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection. The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.   Features: Architecture 12 mic/line inputs with AEC Built-in Telco with ClearEffect processing Built-in USB for PC-based conferencing Scalable Connectivity Standalone and daisy-chained system Stack up units up to 96 mic/line inputs Expansion bus C-Link with 64 channels P-Link bus to connect 6 peripherals Configuration & Management CONSOLE software Auto-discovery of devices Matrix View for entire system FlowView for visualized audio signal paths System monitoring and troubleshooting Audio Signal Processing Acoustic Echo Cancellation processing Distributed Echo Cancellation on every mic input Noise cancellation with Adaptive-Ambience Acoustic Intelligence with faster convergence DARE feedback elimination Microphone gating Flexible Control Options Dialer app for Windows, Mac, iOS, and Android Tabletop controller with a touch panel Wall controller with buttons Web-based controller Supports 3rd-party control modules   Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: Proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

Description: Details iShopping.pk brings you the best price for Toa Electronics Central Control Mixer Unit (TS-770) with express shipping all over Pakistan.   The Toa TS-770 Central Control Unit is designed for use with the Toa TS-770 conference system. The TS-770 is the control unit for the TS-771 chairman station, TS-772 delegate station and TS-775 remote delegate interface. Up to 70 stations can be connected to one TS-770, and up to three TS-770 units can be chained for control of up to 210 stations. The compact, intuitive TS-770 provides a host of features that include microphone-off position switches that automatically switch off microphones after 20 or 40 seconds of silence. Three limiter settings adjust the level threshold and avoid distortion caused by loud talkers. The front panel features level control for microphone and line level signal and two jacks provide connections for an auxiliary microphone and line level device.   Features: Control of Up to 70 Stations Up to 70 stations can be connected to one TS-770, and up to three TS-770 units can be chained for control of up to 210 stations. Automatic Microphone-Off Function The compact, intuitive TS-770 provides a host of features that include microphone-off position switches that automatically switch off microphones after 20 or 40 seconds of silence. Three Position Limiter Three limiter settings adjust the level threshold and avoid distortion caused by loud talkers. Auxiliary Inputs The front panel features level control for microphone and line level signal and two jacks provide connections for an auxiliary microphone and line level device.   Specifications: Inputs Line - 8-pin Connector x2  EXT 1 / EXT 2 - RCA Phono x2 Equalizer In - 1/4" Phone  Aux Mic - 1/4" Phone Aux Line - 1/4" Phone Outputs EXT 1 / EXT 2 - RCA Phono x2  Rec Out - Stereo 1/4" Phone & 1/8" Mini Multi-Pin I/O Connectors No Frequency Response Not Specified By Manufacturer Signal-to-Noise Ratio Not Specified By Manufacturer Distortion Not Specified By Manufacturer Power Requirements AC Mains, 50/60Hz Power Consumption 60W Dimensions (WxHxD) 8.27 x 4.22 x 12.44" (210 x 107.1 x 316mm) Weight 8.82 lb (4 kg)

Description: Details iShopping.pk brings you the best price for Revolabs Fusion 8-Channel Tabletop Dialer and Wireless Microphone System with express shipping all over Pakistan.   The   Fusion 8-Channel Telephony Hybrid with Wireless Microphone System and Tabletop Dialer   from   Revolabs   includes an 8-channel wireless receiver, 6 omnidirectional tabletop mics and 2 lapel mics with rechargeable batteries, a tabletop dialer, a charger base, 2 power cables, and a remote control. It is designed to capture audio for video conferences or conference calls thanks to its built-in hybrid telephone and dialer. The system has 128-bit encryption to keep your signals safe and is GSA compliant.   FEATURES:   • Hybrid Telephone with Tabletop Dialer • 6 Wireless Omni Table Mics • 2 Wireless Lapel Mics • Audio for Video Conference • Acoustic Echo Cancellation • Noise Reduction • 128-Bit Encryption • Rechargeable Batteries with Charge Base • 100' Range of Operation   Specifications: Audio Channels 8 Radio Frequency 1920 to 1930 MHz Range of Operation 100' (30 m), Approximately, with No Obstructions  Out-of-Range Alarm Bandwidth 100 Hz to 6.8 kHz Base Station Power 24 V DC, 2.5 A Locking Power Connector 100-240 V, 50/60 Hz Connectors/Interfaces IR Remote Serial DB9 Sensor Audio Control RJ45 (Firmware Updates Only) Telephone Line/Telephone Set-In RJ11 Network RJ45 (Firmware Updates Only) Mic Level XLR Male Conference Out Auxiliary In/Out Line Level RCA Plug Record Out/Room Out Line Level RCA Plug Conference In/Out Line Level RCA Plug Charging Cradle Power 5 V DC, 2 A 100-240 V, 50-60 Hz Connectors 8 Proprietary 4-Pin Microphone Charge Jacks Microphone Battery Lithium Polymer Talk Time Up to 8 Hours Charge Time 2 Hours Encryption 128-Bit Proprietary (Per Mic Channel) RF Shield Yes, RF Armor Mute Mute Button for Muting and Pairing LED Indicator Mute Status, Pairing, Battery Charge Charging Proprietary 4-Pin

Description: Details iShopping.pk brings you the best price for Revolabs Fusion 8-Channel Telephony Hybrid with Wireless Microphone System Tabletop Dialer with express shipping all over Pakistan.   The   Fusion 8-Channel Telephony Hybrid with Wireless Microphone System, Tabletop Dialer, and Gold revoCARE   from   Revolabs   includes an 8-channel wireless receiver, 6 omnidirectional tabletop mics and 2 lapel mics with rechargeable batteries, a tabletop dialer, a charger base, 2 power cables, and a remote control. It is designed to capture audio for video conferences or conference calls thanks to its built-in hybrid telephone. The system has 128-bit encryption to keep your signals safe and is GSA compliant.   FEATURES:   • Hybrid Telephone with Tabletop Dialer • 6 Wireless Omni Table Mics • 2 Wireless Lapel Mics • Audio for Video Conference • Acoustic Echo Cancellation • Noise Reduction • 128-Bit Encryption • Rechargeable Batteries with Charge Base • 100' Range of Operation   Specifications: Audio Channels 8 Radio Frequency 1920 to 1930 MHz Range of Operation 100' (30 m), Approximately, with No Obstructions  Out-of-Range Alarm Bandwidth 100 Hz to 6.8 kHz Base Station Power 24 V DC, 2.5 A Locking Power Connector 100-240 V, 50/60 Hz Connectors/Interfaces IR Remote Serial DB9 Sensor Audio Control RJ45 (Firmware Updates Only) Telephone Line/Telephone Set-In RJ11 Network RJ45 (Firmware Updates Only) Mic Level XLR Male Conference Out Auxiliary In/Out Line Level RCA Plug Record Out/Room Out Line Level RCA Plug Conference In/Out Line Level RCA Plug Charging Cradle Power 5 V DC, 2 A 100-240 V, 50-60 Hz Connectors 8 Proprietary 4-Pin Microphone Charge Jacks Microphone Battery Lithium Polymer Talk Time Up to 8 Hours Charge Time 2 Hours Encryption 128-Bit Proprietary (Per Mic Channel) RF Shield Yes, RF Armor Mute Mute Button for Muting and Pairing LED Indicator Mute Status, Pairing, Battery Charge Charging Proprietary 4-Pin  

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 128 DSP Mixer with express shipping all over Pakistan.   The Converge Pro 2 128 DSP Mixer with 12 Mic/Line Inputs from ClearOne is a 1 RU digital audio processor for conferences and sound reinforcement. Signal processing has been upgraded to offer world-beating echo cancellation, adaptive noise reduction, and advanced feedback suppression in speech applications for boardrooms, conference rooms, lecture halls, training rooms, courtrooms, houses of worship, and more. Smaller conference rooms can use a single Converge Pro 2 processor. It is ideal for connecting up to three Beamforming Microphone Arrays and up to three DIALOG 20 dual-wireless microphones (sold separately). All these devices use a single P-Link peripheral connection up to 200' apart. Additional line inputs and podium microphones can be connected into the 12 mic/line inputs. Additionally, a USB port connects your computer, which allows you to connect to any standard conferencing platforms, including ClearOne Spontania.   Features: • 12 Mic/Line inputs with AEC • Built-in USB for Windows-based conferencing • Adaptive ambient noise cancellation with DARE feedback elimination • Advanced microphone gating • Dialer app for Windows, Mac, iOS, Android tabletop controller with touch panel • Control from wall, web, or third party connection   Specifications: Mic/Line Inputs 12 Line Outputs 8 USB Connects to your computer for industry standard conferencing platforms Ethernet Yes RS232 Connection Yes GPIO Yes P-Link Connector 2 x P-link C-Link Connector 2 x C-link Dimensions Not specified by manufacturer Weight Not specified by manufacturer

Description: Details iShopping.pk brings you the best price for Revolabs Fusion 4-Channel Telephony Hybrid Revocare with express shipping all over Pakistan.   The Fusion 4-Channel Telephony Hybrid with Wireless Microphone System from Revolabs includes a 4-channel wireless receiver, 3 omnidirectional tabletop mics and 1 lapel mic with rechargeable batteries, a charger base, 2 power cables, and a remote control. It is designed to capture audio for video conferences or conference calls thanks to its built-in hybrid telephone. The system has 128-bit encryption to keep your signals safe and is GSA compliant. The base station receiver can act as an audio mixer by allowing you to adjust the levels of each of its 4 channels. Its built-in acoustic echo cancellation and noise reduction features are designed to provide clear audio for your calls. The 4 microphones have built-in rechargeable batteries that can provide up to 8 hours of talk time on a 2-hour charge in the charger base. They have an approximate 100' range of operation from the base station, allowing for flexibility in placement and movement during your conferences. All of the microphones are RF shielded with Revolabs' RF Armor technology that reduces cell phone interference. revoCARE Extended Service Coverage revoCARE provides you with an added extension and enhancement to the 90 days of complimentary service and support included in the company's limited manufacturer's warranty. revoCARE includes 24-hour advanced replacement on all parts, allowing you to receive replacements before you have sent back the faulty product. revoCARE subscribers also receive Tier 2 service and technical support over the phone with Revolabs' support staff, in addition to free battery replacement on any battery that isn't lasting for at least 7 hours. A host of additional enterprise features are available for Executive HD users including being able to control and monitor your system via Ethernet.   Specifications: Audio Channels 4 Radio Frequency 1920 to 1930 MHz Range of Operation 100' (30 m), Approximately, with No Obstructions  Out-of-Range Alarm Bandwidth 100 Hz to 6.8 kHz Base Station Power 24 V DC, 2.5 A Locking Power Connector 100-240 V, 50/60 Hz Connectors/Interfaces IR Remote Serial DB9 Sensor Audio Control RJ45 (Firmware Updates Only) Telephone Line/Telephone Set-In RJ11 Network RJ45 (Firmware Updates Only) Mic Level XLR Male Conference Out Auxiliary In/Out Line Level RCA Plug Record Out/Room Out Line Level RCA Plug Conference In/Out Line Level RCA Plug Charging Cradle Power 5 V DC, 2 A 100-240 V, 50-60 Hz Connectors 4 Proprietary 4-Pin Microphone Charge Jacks Microphone Battery Lithium Polymer Talk Time Up to 8 Hours Charge Time 2 Hours Encryption 128-Bit Proprietary (Per Mic Channel) RF Shield Yes, RF Armor Mute Mute Button for Muting and Pairing LED Indicator Mute Status, Pairing, Battery Charge Charging Proprietary 4-Pin

Description: Details iShopping.pk brings you the best price for Revolabs Fusion 4-Channel Telephony Hybrid Dialer with express shipping all over Pakistan.   The Fusion 4-Channel Telephony Hybrid with Wireless Microphone System and Tabletop Dialer from Revolabs includes a 4-channel wireless receiver, 3 omnidirectional tabletop mics and 1 lapel mic with rechargeable batteries, a tabletop dialer, a charger base, 2 power cables, and a remote control. It is designed to capture audio for video conferences or conference calls thanks to its built-in hybrid telephone and dialer. The system has 128-bit encryption to keep your signals safe and is GSA compliant. The base station receiver can act as an audio mixer by allowing you to adjust the levels of each of its 4 channels. Its built-in acoustic echo cancellation and noise reduction features are designed to provide clear audio for your calls. The 4 microphones have built-in rechargeable batteries that can provide up to 8 hours of talk time on a 2-hour charge in the charger base. They have an approximate 100' range of operation from the base station, allowing for flexibility in placement and movement during your conferences. All of the microphones are RF shielded with Revolabs' RF Armor technology that reduces cell phone interference.   Specifications: Audio Channels 4 Radio Frequency 1920 to 1930 MHz Range of Operation 100' (30 m), Approximately, with No Obstructions  Out-of-Range Alarm Bandwidth 100 Hz to 6.8 kHz Base Station Power 24 V DC, 2.5 A Locking Power Connector 100-240 V, 50/60 Hz Connectors/Interfaces IR Remote Serial DB9 Sensor Audio Control RJ45 (Firmware Updates Only) Telephone Line/Telephone Set-In RJ11 Network RJ45 (Firmware Updates Only) Mic Level XLR Male Conference Out Auxiliary In/Out Line Level RCA Plug Record Out/Room Out Line Level RCA Plug Conference In/Out Line Level RCA Plug Charging Cradle Power 5 V DC, 2 A 100-240 V, 50-60 Hz Connectors 4 Proprietary 4-Pin Microphone Charge Jacks Microphone Battery Lithium Polymer Talk Time Up to 8 Hours Charge Time 2 Hours Encryption 128-Bit Proprietary (Per Mic Channel) RF Shield Yes, RF Armor Mute Mute Button for Muting and Pairing LED Indicator Mute Status, Pairing, Battery Charge Charging Proprietary 4-Pin

Description: Details iShopping.pk brings you the best price for Revolabs Fusion 4-Channel Telephony Hybrid Wireless System with express shipping all over Pakistan.   The Fusion 4-Channel Telephony Hybrid with Wireless Microphone System from Revolabs includes a 4-channel wireless receiver, 3 omnidirectional tabletop mics and 1 lapel mic with rechargeable batteries, a charger base, 2 power cables, and a remote control. It is designed to capture audio for video conferences or conference calls thanks to its built-in hybrid telephone. The system has 128-bit encryption to keep your signals safe and is GSA compliant. The base station receiver can act as an audio mixer by allowing you to adjust the levels of each of its 4 channels. Its built-in acoustic echo cancellation and noise reduction features are designed to provide clear audio for your calls. The 4 microphones have built-in rechargeable batteries that can provide up to 8 hours of talk time on a 2-hour charge in the charger base. They have an approximate 100' range of operation from the base station, allowing for flexibility in placement and movement during your conferences. All of the microphones are RF shielded with Revolabs' RF Armor technology that reduces cell phone interference.   Specifications: Audio Channels 4 Radio Frequency 1920 to 1930 MHz Range of Operation 100' (30 m), Approximately, with No Obstructions  Out-of-Range Alarm Bandwidth 100 Hz to 6.8 kHz Base Station Power 24 V DC, 2.5 A Locking Power Connector 100-240 V, 50/60 Hz Connectors/Interfaces IR Remote Serial DB9 Sensor Audio Control RJ45 (Firmware Updates Only) Telephone Line/Telephone Set-In RJ11 Network RJ45 (Firmware Updates Only) Mic Level XLR Male Conference Out Auxiliary In/Out Line Level RCA Plug Record Out/Room Out Line Level RCA Plug Conference In/Out Line Level RCA Plug Charging Cradle Power 5 V DC, 2 A 100-240 V, 50-60 Hz Connectors 4 Proprietary 4-Pin Microphone Charge Jacks Microphone Battery Lithium Polymer Talk Time Up to 8 Hours Charge Time 2 Hours Encryption 128-Bit Proprietary (Per Mic Channel) RF Shield Yes, RF Armor Mute Mute Button for Muting and Pairing LED Indicator Mute Status, Pairing, Battery Charge Charging Proprietary 4-Pin

Description: Details iShopping.pk brings you the best price for Toa Electronics Wireless Wall & Stand Mount Receiver (IR-520R) with express shipping all over Pakistan.   The TOA IR-520R IR Wireless Wall Mount Receiver is intended for use with the TOA Infrared Wireless Microphone system. The IR-520R receives IR signal from the TOA handheld or hands-free microphone transmitters, and sends that signal to the IR-702T tuner (all sold separately). The receiver features a 50' (15m) range (line of sight), and is easily wall or microphone stand mounted.   Features: • Mountable on a wall and on a microphone stand •  Stand-Mount brackets included •  Equipped with power indicator LED •  Reception area is up to approximately 50' line of sight   Specifications: Carrier Frequency Channel A: 3.100MHz  Channel B: 3.350MHz Range 50' (15m) Line of sight Connector 75 ohm BNC Connector Operating Temperature 0 to +40°C (32 to 104°F) Finish Filter Section: Polycarbonate, optical cut filter Power 24V DC (Supplied from the IR-702T Tuner) Dimensions (WxHxD) 3.33 x 2.5 x 1.26" (84.5 x 63.5 x 32mm) Weight 0.22 lb (100 g)

Description: Details iShopping.pk brings you the best price for Vivotek C Series 2MP Dome Night Vision Camera (FD816BA-HF2) with 1 year international warranty and express shipping all over Pakistan.       Specification: System Information CPU Multimedia SoC (system-on-chip) Flash Memory 1 GB RAM 2 GB Camera Features Image Sensor 2 MP 1/2.7" progressive scan CMOS sensor Maximum Resolution 1920 x 1080 Lens Type Fixed focus Focal Length 2.8mm Aperture f/1.8 Field of View Horizontal: 122° Vertical: 66° Diagonal: 142° Shutter Time 1/5 to 1/32,000 sec WDR Technology Wide Dynamic Range Day/Night Removable IR cut filter Minimum Illumination 0.15 lux at f/1.8 (color) 0.01 lux at f/1.8 (B&W) ePTZ 48x digital zoom (4x on IE plug-in, 12x built in) IR Illuminators 8 x IR LEDs, built-in, effective up to 98.4' (30 m) with Smart IR Onboard Storage microSD card slot supports up to 64 GB microSD card (available separately) Video Compression H.264 and MJPEG Maximum Frame Rate 30 fps at 1920 x 1080 in both compressions Maximum Streams 4 simultaneous streams S/N Ratio 66 dB Dynamic Range 100 dB Video Streaming Adjustable resolution, quality, and bit rate Smart Stream Image Settings Adjustable image size, quality, and bit rate Time stamp, text overlay, flip/mirror Configurable brightness, contrast, saturation, sharpness, white balance, exposure control, gain, backlight compensation, privacy masks Scheduled profile settings, 3D noise reduction, video rotation, defog Audio Audio Capability Two-way audio (full duplex) Compression G.711, G.726 Interface Built-in microphone External line input External line output Network Users Live viewing for up to 10 clients Protocols IPv4, IPv6, TCP/IP, HTTP, HTTPS, UPnP, RTSP/RTP/RTCP, IGMP, SMTP, FTP, DHCP, NTP, DNS, DDNS, PPPoE, CoS, QoS, SNMP, 802.1X, UDP, ICMP, ARP, SSL, TLS Interface RJ45 10Base-T/100Base-TX Ethernet ONVIF Supported Intelligent Video Video Motion Detection Five-window video motion detection VCA Line crossing detection, field detection, loitering detection Alarm and Event Alarm Triggers Motion detection, manual trigger, digital input, periodic trigger, system boot, recording notification, camera tampering detection, audio detection Alarm Events Event notification using digital output, HTTP, SMTP, FTP, NAS server, SD card File upload via HTTP, SMTP, FTP, NAS server, and SD card General Connectors RJ45 for Network/PoE connection Audio input Audio output 12 VDC power input 1 x Digital input 1 x Digital output LED Indicator System power and status indicator Power Input 12 VDC IEEE 802.3af/at PoE Class 0 Power Consumption Maximum: 9 W Certifications CE, LVD, FCC Class B, VCCI, C-Tick Operating Temperature Starting Temperature: 32 to 122°F (0 to 50°C) Working Temperature: 14 to 122°F (-10 to 50°C) System Requirements Operating System Microsoft Windows 7, 8, Vista, XP, 2000 Web Browser Mozilla Firefox 7 to 43 (streaming only) Internet Explorer 7, 8, 9, 10, 11 Other Players VLC: 1.1.11 or above QuickTime: 7 or above Physical Dimensions (Ø x H) 5.4 x 4" (13.8 x 10.3 cm) Weight 19 oz (541 g)   Product Description: •  1920 x 1080 Resolution at 30 fps •  Mechanical IR Cut Filter •  IR LEDs for Night Vision up to 98' •  2.8mm Fixed Lens •  142° Diagonal Field of View •  Two-Way Audio with Built-In Microphone •  Built-In PIR Sensor for Motion Detection •  H.264 and MJPEG Compression •  microSD Slot Supports up to 64GB •  RJ45 Ethernet Connection with PoE   Product Overview: The  C Series FD816BA-HF2 2MP Network Dome Camera with Night Vision  from  Vivotek  captures 1080p video at up to 30 fps thanks to its 2MP 1/2.7" progressive scan CMOS sensor. Its 2.8mm fixed lens has a 142° diagonal field of view to monitor large indoor areas (depending on placement). A mechanical IR cut filter and IR LEDs help produce clear images in complete darkness from up to 98' away. The camera features a built-in PIR sensor to accurately detect motion. Additionally, it uses WDR and SNV (Supreme Night Visibility) technologies to capture color video in low-light environments. PoE technology eliminates the need for additional cable runs by combining the network connection and power into a single Ethernet cable. •  2MP 1/2.7" progressive scan CMOS sensor captures 1920 x 1080 resolution video at up to 30 fps •  2.8mm fixed lens has a wide 142° diagonal field of view •  Mechanical IR cut filter and IR LEDs produce clear images in complete darkness from up to 98' away •  Built-in PIR sensor for accurate motion detection •  SNV (Supreme Night Visibility) for low-light conditions •  Two-way audio support with built-in microphone •  ONVIF-compliant for a wide range of compatibility

Description: Details iShopping.pk brings you the best price for Vivotek V Series 2MP Network Dome Camera (FD816BA-HT) with 1 year international warranty and express shipping all over Pakistan.     Specification: System Information CPU Multimedia SoC (system-on-chip) Flash Memory 1 GB RAM 2 GB Camera Features Image Sensor 2 MP 1/2.7" progressive scan CMOS sensor Maximum Resolution 1920 x 1080 Lens Type Varifocal Focal Length 2.8-12mm Aperture f/1.8-2.85 Auto-Iris Lens Support P-iris Field of View Horizontal: 107-34° Vertical: 56-19° Diagonal: 133-39° Shutter Time 1/5 to 1/32,000 sec WDR Technology Wide Dynamic Range Day/Night Removable IR cut filter Minimum Illumination Color: 0.1 lux at f/1.8 B&W: 0.01 lux at f/1.8 ePTZ 48x digital zoom (4x on IE plug-in, 12x built in) IR Illuminators 8 x IR LEDs, built-in, effective up to 98.4' (30 m) with Smart IR Onboard Storage microSD card slot supports up to 64 GB microSD card (available separately) Video Compression H.264 and MJPEG Maximum Frame Rate 30 fps at 1920 x 1080 in both compressions Maximum Streams 4 simultaneous streams S/N Ratio 66 dB Dynamic Range 100 dB Video Streaming Adjustable resolution, quality, and bit rate Smart Stream Image Settings Adjustable image size, quality, and bit rate Time stamp, text overlay, flip/mirror Configurable brightness, contrast, saturation, sharpness, white balance, exposure control, gain, backlight compensation, privacy masks Scheduled profile settings, 3D noise reduction, video rotation, defog Audio Audio Capability Two-way audio (full duplex) Compression G.711, G.726 Interface Built-in microphone External line input External line output Network Users Live viewing for up to 10 clients Protocols IPv4, IPv6, TCP/IP, HTTP, HTTPS, UPnP, RTSP/RTP/RTCP, IGMP, SMTP, FTP, DHCP, NTP, DNS, DDNS, PPPoE, CoS, QoS, SNMP, 802.1X, UDP, ICMP, ARP, SSL, TLS Interface RJ45 10Base-T/100Base-TX Ethernet ONVIF Supported Intelligent Video Video Motion Detection Five-window video motion detection VCA Line crossing detection, field detection, loitering detection Alarm and Event Alarm Triggers Motion detection, manual trigger, digital input, periodic trigger, system boot, recording notification, camera tampering detection, audio detection Alarm Events Event notification using digital output, HTTP, SMTP, FTP, NAS server, SD card File upload via HTTP, SMTP, FTP, NAS server, and SD card General Smart Focus System Remote focus Connectors RJ45 for Network/PoE connection Audio input Audio output 12 VDC power input 1 x Digital input 1 x Digital output LED Indicator System power and status indicator Power Input 12 VDC IEEE 802.3af/at PoE Class 0 Power Consumption Maximum: 13 W Certifications CE, LVD, FCC Class B, VCCI, C-Tick, UL Operating Temperature Starting Temperature: 32 to 122°F (0 to 50°C) Working Temperature: 14 to 122°F (-10 to 50°C) System Requirements Operating System Microsoft Windows 7, 8, Vista, XP, 2000 Web Browser Mozilla Firefox 7 to 43 (streaming only) Internet Explorer 7, 8, 9, 10, 11 Other Players VLC: 1.1.11 or above QuickTime: 7 or above   Product Description: •  1920 x 1080 Resolution at 30 fps •  Mechanical IR Cut Filter •  IR LEDs for Night Vision up to 98' •  2.8-12mm Varifocal Lens •  133-39° Diagonal Field of View •  Two-Way Audio with Built-In Microphone •  Built-In PIR Sensor for Motion Detection •  H.264 and MJPEG Compression •  microSD Slot Supports up to 64GB •  RJ45 Ethernet Connection with PoE   Product Overview: The  V Series FD816BA-HT 2MP Network Dome Camera  from  Vivotek  captures 1080p video at up to 30 fps thanks to its 2MP 1/2.7" progressive scan CMOS sensor. Its 2.8-12mm fixed lens has a 133-39° diagonal field of view to monitor large to small indoor areas (depending on placement). A mechanical IR cut filter and IR LEDs help produce clear images in complete darkness from up to 98' away. The camera features a built-in PIR sensor to accurately detect motion. Additionally, it uses WDR and SNV (Supreme Night Visibility) to capture color video in low-light environments. PoE technology eliminates the need for additional cable runs by combining the network connection and power into a single Ethernet cable. •  2MP 1/2.7" progressive scan CMOS sensor captures 1920 x 1080 resolution video at up to 30 fps •  2.8-12mm varifocal lens has a wide 133-39° diagonal field of view •  Mechanical IR cut filter and IR LEDs produce clear images in complete darkness from up to 98' away •  Built-in PIR sensor for accurate motion detection •  SNV (Supreme Night Visibility) for low-light conditions •  Two-way audio support with built-in microphone •  ONVIF-compliant for a wide range of compatibility

Description: Details iShopping.pk brings you the best price for Bosch CCS-CU Control Unit For CCS 900 Ultro Conference System with express shipping all over Pakistan.   The Bosch CCS-CU Control Unit is the central power and control station for all CCS 900 Ultro Conference System contributor units, such as the chairman and delegate units. The control unit will supply power for up to 50 delegate / chairman units, and provide control for up to 150. The unit features a built in speaker and automated, programmable control over contributor units without the need for an operator. Its Digital Acoustic Feedback Suppression (DAFS) eliminates feedback howling and maintains clear, intelligible speech. Plenty of connections allow for interfacing within paging systems, amplifier systems, recording devices and more. The unit is feature rich, however its control section is straightforward and intuitive to operate in any conference setting.   Features: Discussion Control Without Operator The CU can be setup to operate standalone without the need for an operator. The following 5 modes can be chosen using a rotary control on the unit's top panel: • Open mode - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active • Open mode with auto-switch-off - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active. If the delegate does not speak for 30 seconds, microphones are automatically switched off • Override mode - delegates can override each other simply by activating their microphones. Only one microphone can be active at any one time. (Note: In override mode, delegates cannot override chairmen) • Chairman only mode - only chairmen can speak. Delegate microphones cannot be activated, even when a chairman is not speaking • Test mode - checks if system connections are correct. All microphone light rings and contribution unit LEDs light up to indicate that units are properly connected Supplies Power for up to 50 Contribution Units The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to connect 25 contribution units to each trunk output, with a maximum system cable length of 109.3 yards (100m). Provides Control for up to 150 Contribution Units Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150 contribution units. In this configuration a single CU acts as a master controller for the entire system. Built-in Monitor Loudspeaker The built-in monitor loudspeaker and headphone socket allow the conference to be monitored. Interfaces the System With External Equipment The following equipment can be interfaced to the CCS Ultro Discussion System through the CU: • External wired or wireless microphone - for guest speakers or audience participation. (Note: The external microphone is muted when the priority button on a chairman unit is pressed, and when the system is operating in 'chairman only' mode) • External PA system - for transmitting the proceedings to an audience in the same room or an adjacent room• Tape recorder - for external recording and playing back meetings and discussions • Audio equipment - for providing background music • Telephone coupler - to allow a remote delegate to participate via telephone• External audio processing - an insertion connector is provided Controls and Indicators (Top) • Mains on/off switch • Graphical display for status information (CCS‐CURD) • 5 soft buttons for configuration and control of thebuilt-in MP3 recorder (CCS‐CURD) • Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This control also determines the maximum level for the headphone outputs of the contribution units and the CU. • Microphone mode rotary switch, for setting the number of simultaneously active microphones, and selecting one of the four operation modes (plus test mode) • Power on LED Controls and Indicators (Back) • On/off switch for digital acoustic feedback suppression facility (CCS‐CUD, CCS‐CURD)• Microphone input gain adjustment • External recorder input gain adjustment• Insertion connector bypass switch   Specifications: Connections Top • 1x 0.14" (3.5mm) stereo headphone socket Back • 1x AC input • 2x 7-pole circular female connectors, trunk in/out loop through interconnection  • 1x 3-pole female XLR connector, microphone input (can be used as line input by included 50dB attenuator) • 1 x Cinch connector pair, line input/output  • 1 x Cinch connector pair, telephone input/output • 1 x Cinch connector pair, insertion input/output  • 2 x Cinch connector pairs (R/L channel), external recorder input/output • USB interface (CCS-CURD) Power Supply Mains voltage: 100 to 240 VAC ± 10% Current consumption: maximum 0.9A (100 VAC) to 0.3 A (240 VAC) DC supply to contribution units: 24V ± 1V (current limited) Volume mute (50dB att.) + 10 steps of 1.9dB Limiter 10dB above nominal level loudspeaker / headphone Gain Gain reduction due to number of open microphones (NOM): ÷ NOM ± 1 dB Total Harmonic Distortion Nominal input (85 dB SPL): Max. input (110 dB SPL): Sample Rate Recording: 32kHz Playback: 32, 44.1, 48kHz Bit Rate Recording: 64, 96, 128, 192, 256 KBit/sec Playback: any bitrate Mount Tabletop (portable or fixed) 19-inch rack flush mounting Material Top: polymer Bottom: painted metal Color Charcoal and Black Dimensions (HxWxD) 3.4 x 14.2 x 5.6" (84 x 361 x 143mm) Height of feet: 0.22" (5.5mm) Weight 3.3 lb (1.5kg)

Description: Details iShopping.pk brings you the best price for Bosch CCS-CUD Control Unit For CCS 900 Ultro Conference System with express shipping all over Pakistan.   The Bosch CCS-CUD Control Unit is the central power and control station for all CCS 900 Ultro Conference System contributor units, such as the chairman and delegate units. The control unit will supply power for up to 50 delegate / chairman units, and provide control for up to 150. The unit features a built in speaker and automated, programmable control over contributor units without the need for an operator. Its Digital Acoustic Feedback Suppression (DAFS) eliminates feedback howling and maintains clear, intelligible speech. Plenty of connections allow for interfacing within paging systems, amplifier systems, recording devices and more. The unit is feature rich, however its control section is straightforward and intuitive to operate in any conference setting.   Features: Digital Acoustic Feedback Suppression The digital acoustic feedback suppression facility automatically eliminates acoustic feedback (also known as 'howling' or 'Larsen effect'). This gives better speech intelligibility by allowing the speaker volume to be turned up as loud as required without any risk of feedback. Discussion Control Without Operator The CU can be setup to operate standalone without the need for an operator. The following 5 modes can be chosen using a rotary control on the unit's top panel: • Open mode - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active • Open mode with auto-switch-off - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active. If the delegate does not speak for 30 seconds, microphones are automatically switched off • Override mode - delegates can override each other simply by activating their microphones. Only one microphone can be active at any one time. (Note: In override mode, delegates cannot override chairmen) • Chairman only mode - only chairmen can speak. Delegate microphones cannot be activated, even when a chairman is not speaking • Test mode - checks if system connections are correct. All microphone light rings and contribution unit LEDs light up to indicate that units are properly connected Supplies Power for up to 50 Contribution Units The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to connect 25 contribution units to each trunk output, with a maximum system cable length of 109.3 yards (100m). Provides Control for up to 150 Contribution Units Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150 contribution units. In this configuration a single CU acts as a master controller for the entire system. Built-in Monitor Loudspeaker The built-in monitor loudspeaker and headphone socket allow the conference to be monitored. Interfaces the System With External Equipment The following equipment can be interfaced to the CCS Ultro Discussion System through the CU: • External wired or wireless microphone - for guest speakers or audience participation. (Note: The external microphone is muted when the priority button on a chairman unit is pressed, and when the system is operating in 'chairman only' mode) • External PA system - for transmitting the proceedings to an audience in the same room or an adjacent room• Tape recorder - for external recording and playing back meetings and discussions • Audio equipment - for providing background music • Telephone coupler - to allow a remote delegate to participate via telephone• External audio processing - an insertion connector is provided Controls and Indicators (Top) • Mains on/off switch • Graphical display for status information (CCS‐CURD) • 5 soft buttons for configuration and control of thebuilt-in MP3 recorder (CCS‐CURD) • Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This control also determines the maximum level for the headphone outputs of the contribution units and the CU. • Microphone mode rotary switch, for setting the number of simultaneously active microphones, and selecting one of the four operation modes (plus test mode) • Power on LED Controls and Indicators (Back) • On/off switch for digital acoustic feedback suppression facility (CCS‐CUD, CCS‐CURD)• Microphone input gain adjustment • External recorder input gain adjustment• Insertion connector bypass switch   Specifications: Connections Top • 1x 0.14" (3.5mm) stereo headphone socket Back • 1x AC input • 2x 7-pole circular female connectors, trunk in/out loop through interconnection  • 1x 3-pole female XLR connector, microphone input (can be used as line input by included 50dB attenuator) • 1 x Cinch connector pair, line input/output  • 1 x Cinch connector pair, telephone input/output • 1 x Cinch connector pair, insertion input/output  • 2 x Cinch connector pairs (R/L channel), external recorder input/output • USB interface (CCS-CURD) Power Supply Mains voltage: 100 to 240 VAC ± 10% Current consumption: maximum 0.9A (100 VAC) to 0.3 A (240 VAC) DC supply to contribution units: 24V ± 1V (current limited) Volume mute (50dB att.) + 10 steps of 1.9dB Limiter 10dB above nominal level loudspeaker / headphone Gain Gain reduction due to number of open microphones (NOM): ÷ NOM ± 1 dB Total Harmonic Distortion Nominal input (85 dB SPL): Max. input (110 dB SPL): Sample Rate Recording: 32kHz Playback: 32, 44.1, 48kHz Bit Rate Recording: 64, 96, 128, 192, 256 KBit/sec Playback: any bitrate Mount Tabletop (portable or fixed) 19-inch rack flush mounting Material Top: polymer Bottom: painted metal Color Charcoal and Black Dimensions (HxWxD) 3.4 x 14.2 x 5.6" (84 x 361 x 143mm) Height of feet: 0.22" (5.5mm) Weight 3.3 lb (1.5kg)

Description: Details iShopping.pk brings you the best price for Bosch CCS-CU Control Unit For CCS 900 Ultro Conference System U.S. Version with express shipping all over Pakistan.   The Bosch CCS-CU Control Unit is the central power and control station for all CCS 900 Ultro Conference System contributor units, such as the chairman and delegate units. The control unit will supply power for up to 50 delegate / chairman units, and provide control for up to 150. The unit features a built in speaker and automated, programmable control over contributor units without the need for an operator. Its Digital Acoustic Feedback Suppression (DAFS) eliminates feedback howling and maintains clear, intelligible speech. Plenty of connections allow for interfacing within paging systems, amplifier systems, recording devices and more. The unit is feature rich, however its control section is straightforward and intuitive to operate in any conference setting.   Features: Discussion Control Without Operator The CU can be setup to operate standalone without the need for an operator. The following 5 modes can be chosen using a rotary control on the unit's top panel: • Open mode - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active • Open mode with auto-switch-off - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active. If the delegate does not speak for 30 seconds, microphones are automatically switched off • Override mode - delegates can override each other simply by activating their microphones. Only one microphone can be active at any one time. (Note: In override mode, delegates cannot override chairmen) • Chairman only mode - only chairmen can speak. Delegate microphones cannot be activated, even when a chairman is not speaking • Test mode - checks if system connections are correct. All microphone light rings and contribution unit LEDs light up to indicate that units are properly connected Supplies Power for up to 50 Contribution Units The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to connect 25 contribution units to each trunk output, with a maximum system cable length of 109.3 yards (100m). Provides Control for up to 150 Contribution Units Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150 contribution units. In this configuration a single CU acts as a master controller for the entire system. Built-in Monitor Loudspeaker The built-in monitor loudspeaker and headphone socket allow the conference to be monitored. Interfaces the System With External Equipment The following equipment can be interfaced to the CCS Ultro Discussion System through the CU: • External wired or wireless microphone - for guest speakers or audience participation. (Note: The external microphone is muted when the priority button on a chairman unit is pressed, and when the system is operating in 'chairman only' mode) • External PA system - for transmitting the proceedings to an audience in the same room or an adjacent room • Tape recorder - for external recording and playing back meetings and discussions • Audio equipment - for providing background music • Telephone coupler - to allow a remote delegate to participate via telephone• External audio processing - an insertion connector is provided Controls and Indicators (Top) • Mains on/off switch • Graphical display for status information (CCS‐CURD) • 5 soft buttons for configuration and control of thebuilt-in MP3 recorder (CCS‐CURD) • Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This control also determines the maximum level for the headphone outputs of the contribution units and the CU. • Microphone mode rotary switch, for setting the number of simultaneously active microphones, and selecting one of the four operation modes (plus test mode) • Power on LED Controls and Indicators (Back) • On/off switch for digital acoustic feedback suppression facility (CCS‐CUD, CCS‐CURD)• Microphone input gain adjustment • External recorder input gain adjustment • Insertion connector bypass switch   Specifications: Connections Top • 1x 0.14" (3.5mm) stereo headphone socket Back • 1x AC input • 2x 7-pole circular female connectors, trunk in/out loop through interconnection  • 1x 3-pole female XLR connector, microphone input (can be used as line input by included 50dB attenuator) • 1 x Cinch connector pair, line input/output  • 1 x Cinch connector pair, telephone input/output • 1 x Cinch connector pair, insertion input/output  • 2 x Cinch connector pairs (R/L channel), external recorder input/output • USB interface (CCS-CURD) Power Supply Mains voltage: 100 to 240 VAC ± 10% Current consumption: maximum 0.9A (100 VAC) to 0.3 A (240 VAC) DC supply to contribution units: 24V ± 1V (current limited) Volume mute (50dB att.) + 10 steps of 1.9dB Limiter 10dB above nominal level loudspeaker / headphone Gain Gain reduction due to number of open microphones (NOM): ÷ NOM ± 1 dB Total Harmonic Distortion Nominal input (85 dB SPL): Max. input (110 dB SPL): Sample Rate Recording: 32kHz Playback: 32, 44.1, 48kHz Bit Rate Recording: 64, 96, 128, 192, 256 KBit/sec Playback: any bitrate Mount Tabletop (portable or fixed) 19-inch rack flush mounting Material Top: polymer Bottom: painted metal Color Charcoal and Black Dimensions (HxWxD) 3.4 x 14.2 x 5.6" (84 x 361 x 143mm) Height of feet: 0.22" (5.5mm) Weight 3.3 lb (1.5kg)

Description: Details iShopping.pk brings you the best price for Bosch CCS-CUD Control Unit For CCS 900 Ultro Conference System U.S. Version with express shipping all over Pakistan.   The Bosch CCS-CUD Control Unit is the central power and control station for all CCS 900 Ultro Conference System contributor units, such as the chairman and delegate units. The control unit will supply power for up to 50 delegate / chairman units, and provide control for up to 150. The unit features a built in speaker and automated, programmable control over contributor units without the need for an operator. Its Digital Acoustic Feedback Suppression (DAFS) eliminates feedback howling and maintains clear, intelligible speech. Plenty of connections allow for interfacing within paging systems, amplifier systems, recording devices and more. The unit is feature rich, however its control section is straightforward and intuitive to operate in any conference setting.   Features: Digital Acoustic Feedback Suppression The digital acoustic feedback suppression facility automatically eliminates acoustic feedback (also known as 'howling' or 'Larsen effect'). This gives better speech intelligibility by allowing the speaker volume to be turned up as loud as required without any risk of feedback. Discussion Control Without Operator The CU can be setup to operate standalone without the need for an operator. The following 5 modes can be chosen using a rotary control on the unit's top panel: • Open mode - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active • Open mode with auto-switch-off - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active. If the delegate does not speak for 30 seconds, microphones are automatically switched off • Override mode - delegates can override each other simply by activating their microphones. Only one microphone can be active at any one time. (Note: In override mode, delegates cannot override chairmen) • Chairman only mode - only chairmen can speak. Delegate microphones cannot be activated, even when a chairman is not speaking • Test mode - checks if system connections are correct. All microphone light rings and contribution unit LEDs light up to indicate that units are properly connected Supplies Power for up to 50 Contribution Units The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to connect 25 contribution units to each trunk output, with a maximum system cable length of 109.3 yards (100m). Provides Control for up to 150 Contribution Units Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150 contribution units. In this configuration a single CU acts as a master controller for the entire system. Built-in Monitor Loudspeaker The built-in monitor loudspeaker and headphone socket allow the conference to be monitored. Interfaces the System With External Equipment The following equipment can be interfaced to the CCS Ultro Discussion System through the CU: • External wired or wireless microphone - for guest speakers or audience participation. (Note: The external microphone is muted when the priority button on a chairman unit is pressed, and when the system is operating in 'chairman only' mode) • External PA system - for transmitting the proceedings to an audience in the same room or an adjacent room • Tape recorder - for external recording and playing back meetings and discussions • Audio equipment - for providing background music • Telephone coupler - to allow a remote delegate to participate via telephone• External audio processing - an insertion connector is provided Controls and Indicators (Top) • Mains on/off switch • Graphical display for status information (CCS‐CURD) • 5 soft buttons for configuration and control of thebuilt-in MP3 recorder (CCS‐CURD) • Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This control also determines the maximum level for the headphone outputs of the contribution units and the CU. • Microphone mode rotary switch, for setting the number of simultaneously active microphones, and selecting one of the four operation modes (plus test mode) • Power on LED Controls and Indicators (Back) • On/off switch for digital acoustic feedback suppression facility (CCS‐CUD, CCS‐CURD)• Microphone input gain adjustment • External recorder input gain adjustment • Insertion connector bypass switch   Specifications: Connections Top • 1x 0.14" (3.5mm) stereo headphone socket Back • 1x AC input • 2x 7-pole circular female connectors, trunk in/out loop through interconnection  • 1x 3-pole female XLR connector, microphone input (can be used as line input by included 50dB attenuator) • 1 x Cinch connector pair, line input/output  • 1 x Cinch connector pair, telephone input/output • 1 x Cinch connector pair, insertion input/output  • 2 x Cinch connector pairs (R/L channel), external recorder input/output • USB interface (CCS-CURD) Power Supply Mains voltage: 100 to 240 VAC ± 10% Current consumption: maximum 0.9A (100 VAC) to 0.3 A (240 VAC) DC supply to contribution units: 24V ± 1V (current limited) Volume mute (50dB att.) + 10 steps of 1.9dB Limiter 10dB above nominal level loudspeaker / headphone Gain Gain reduction due to number of open microphones (NOM): ÷ NOM ± 1 dB Total Harmonic Distortion Nominal input (85 dB SPL): Max. input (110 dB SPL): Sample Rate Recording: 32kHz Playback: 32, 44.1, 48kHz Bit Rate Recording: 64, 96, 128, 192, 256 KBit/sec Playback: any bitrate Mount Tabletop (portable or fixed) 19-inch rack flush mounting Material Top: polymer Bottom: painted metal Color Charcoal and Black Dimensions (HxWxD) 3.4 x 14.2 x 5.6" (84 x 361 x 143mm) Height of feet: 0.22" (5.5mm) Weight 3.3 lb (1.5kg)

Description: Details iShopping.pk brings you the best price for Vivotek C Series 5MP Vandal Resistant Outdoor Network Dome Camera with 2.8mm Lens (FD8382-VF2) with 1 year international warranty and express shipping all over Pakistan.     Specification:   Camera Image Sensor 1/3.2" progressive scan CMOS sensor Maximum Resolution 2560 x 1920 (5 MP) Lens 2.8mm fixed Aperture f/1.8 Field of View Horizontal: 90° Vertical: 67° Diagonal: 118° Shutter Time 1/5 to 1/32,000 sec Wide Dynamic Range WDR Enhanced Day/Night Removable IR cut filter Minimum Illumination Color: 0.39 lux at f/1.8  B&W: 0.001 lux at f/1.8 PTZ ePTZ: 48x digital zoom (4x on IE plug-in, 12x built in) Number of IR LEDs and Range 8 x Smart IR LEDs, up to 98' (30 m) On-board Storage microSD/SDHC/SDXC card slot Seamless recording Video Compression H.264 and MJPEG Maximum Frame Rate 15 fps at 2560 x 1920 15 fps at 2048 x 1536 30 fps at 1920 x 1080 Maximum Streams 4 simultaneous streams S/N Ratio 67 dB Dynamic Range 70 dB Video Streaming Adjustable resolution, quality, and bit rate; Smart Stream Image Settings Adjustable image size, quality, and bit rate Time stamp, text overlay, flip/mirror Configurable brightness, contrast, saturation, sharpness, white balance, exposure control, gain, backlight compensation, privacy masks Scheduled profile settings, 3D noise reduction, video rotation, defog Audio Type Two-way audio (full duplex) Compression G.711, G.726 Interface External microphone input External line output Network Users Live viewing for up to 10 clients Protocols IPv4, IPv6, TCP/IP, HTTP, HTTPS, UPnP, RTSP/RTP/RTCP, IGMP, SMTP, FTP, DHCP, NTP, DNS, DDNS, PPPoE, CoS, QoS, SNMP, 802.1X, UDP, ICMP, ARP, SSL, TLS Interface RJ45 10Base-T/100Base-TX Ethernet ONVIF Supported System CPU Multimedia SoC (System-on-Chip) Flash 1 GB RAM 4 GB System Requirements Operating System Microsoft Windows 8, 7, Vista, XP, 2000 Web Browser Mozilla Firefox 7 to 43 (streaming only) Internet Explorer 7 to 11 Other Players VLC: 1.1.11 or above QuickTime: 7 or above Intelligent Video Video Motion Detection Five-window video motion detection VCA Line crossing detection, field detection, loitering detection Alarm Triggers Video motion detection, manual trigger, digital input, periodical trigger, system boot, recording notification, camera tampering detection, audio detection Event Event notification using digital output, HTTP, SMTP, FTP, NAS server, and microSD card (available separately)  File upload via HTTP, SMTP, FTP, NAS server, and microSD card (available separately) General Connectors 1 x RJ45 cable connector for network/PoE connection 1 x Audio input 1 x Audio output 1 x 12 VDC power input 1 x Digital input 1 x Digital output LED Indicator System power and status indicator Power Input 12 VDC, IEEE 802.3af/at PoE Class 0 Maximum Power Consumption 9.5 W Safety CE, LVD, FCC Class A, VCCI, C-Tick Casing IP66-rated IK10-rated Operating Temperature Starting Temperature: 14 to 122°F (-10 to 50°C) Working Temperature: -4 to 122°F (-20 to 50°C) Dimensions 6.1 x 4.1" (15.5 x 10.3 cm) Weight 2 lb (0.92 kg)     Product Description: •  2560 x 1920 Resolution at 15 fps   •  Low Light Recording at 98' Range   •  2.8mm Fixed Lens   •  118° Diagonal Field of View   •  Two-Way Audio Communication   •  microSD Slot for Local Storage   •  RJ45 Ethernet Connection with PoE   •  ONVIF-Compliant   •  IP66- and IK10-Rated for Outdoor Use      Product Overview: The  C Series FD8382-VF2 5MP Vandal-Resistant Outdoor Network Dome Camera  from  Vivotek  captures video during the day and at night thanks to integrated IR LEDs around the 2.8mm fixed lens. Its 1/3.2" progressive scan CMOS sensor allows the camera to record in 2560 x 1920 resolution at up to 15 fps. The camera is housed in an IP66- and IK10-rated enclosure for protection against dust, water, and impact, making it suitable for outdoor use, even in areas at risk of vandalism. •  5MP progressive scan CMOS sensor captures 2560 x 1920 resolution video at up to 15 fps •  2.8mm fixed lens has a 118° diagonal field of view to monitor large areas •  Built-in IR LEDs for video of objects up to 98' away in extreme low light •  WDR for visibility in varying lighting conditions •  3D noise reduction •  Two-way audio communication via external microphone input and external line output •  Video rotation for corridor view •  IP66- and IK10-rated vandal-resistant enclosure for outdoor use

Description: Details iShopping.pk brings you the best price for Vivotek C Series 5MP Vandal Resistant Outdoor Extreme Weather Dome Camera with 2.8mm Lens (FD8382-EVF2) with 1 year international warranty and express shipping all over Pakistan.     Specification: Camera Image Sensor 1/3.2" progressive scan CMOS sensor Maximum Resolution 2560 x 1920 (5 MP) Lens 2.8mm fixed Aperture f/1.8 Field of View Horizontal: 90° Vertical: 67° Diagonal: 118° Shutter Time 1/5 to 1/32,000 sec Wide Dynamic Range WDR Enhanced Day/Night Removable IR cut filter Minimum Illumination Color: 0.39 lux at f/1.8  B&W: 0.001 lux at f/1.8 PTZ ePTZ: 48x digital zoom (4x on IE plug-in, 12x built in) Number of IR LEDs and Range 8 x Smart IR LEDs, up to 98' (30 m) On-board Storage microSD/SDHC/SDXC card slot Seamless recording Video Compression H.264 and MJPEG Maximum Frame Rate 15 fps at 2560 x 1920 15 fps at 2048 x 1536 30 fps at 1920 x 1080 Maximum Streams 4 simultaneous streams S/N Ratio 67 dB Dynamic Range 70 dB Video Streaming Adjustable resolution, quality, and bit rate; Smart Stream Image Settings Adjustable image size, quality, and bit rate Time stamp, text overlay, flip/mirror Configurable brightness, contrast, saturation, sharpness, white balance, exposure control, gain, backlight compensation, privacy masks Scheduled profile settings, 3D noise reduction, video rotation, defog Audio Type Two-way audio (full duplex) Compression G.711, G.726 Interface External microphone input External line output Network Users Live viewing for up to 10 clients Protocols IPv4, IPv6, TCP/IP, HTTP, HTTPS, UPnP, RTSP/RTP/RTCP, IGMP, SMTP, FTP, DHCP, NTP, DNS, DDNS, PPPoE, CoS, QoS, SNMP, 802.1X, UDP, ICMP, ARP, SSL, TLS Interface RJ45 10Base-T/100Base-TX Ethernet ONVIF Supported System CPU Multimedia SoC (System-on-Chip) Flash 1 GB RAM 4 GB System Requirements Operating System Microsoft Windows 8, 7, Vista, XP, 2000 Web Browser Mozilla Firefox 7 to 43 (streaming only) Internet Explorer 7 to 11 Other Players VLC: 1.1.11 or above QuickTime: 7 or above Intelligent Video Video Motion Detection Five-window video motion detection VCA Line crossing detection, field detection, loitering detection Alarm Triggers Video motion detection, manual trigger, digital input, periodical trigger, system boot, recording notification, camera tampering detection, audio detection Event Event notification using digital output, HTTP, SMTP, FTP, NAS server, and microSD card (available separately)  File upload via HTTP, SMTP, FTP, NAS server, and microSD card (available separately) General Connectors 1 x RJ45 cable connector for network/PoE connection 1 x Audio input 1 x Audio output 1 x 12 VDC power input 1 x Digital input 1 x Digital output LED Indicator System power and status indicator Power Input 12 VDC, IEEE 802.3at PoE Class 4 Maximum Power Consumption 25 W Safety CE, LVD, FCC Class A, VCCI, C-Tick Casing IP66-rated IK10-rated Operating Temperature Starting Temperature: -40 to 122°F (-40 to 50°C) Working Temperature: -58 to 122°F (-50 to 50°C) Dimensions 6.1 x 4.1" (15.5 x 10.3 cm) Weight 2 lb (0.92 kg)   Product Description: •  2560 x 1920 Resolution at 15 fps •  Low Light Recording at 98' Range •  2.8mm Fixed Lens •  118° Diagonal Field of View •  Two-Way Audio Communication •  microSD Slot for Local Storage •  RJ45 Ethernet Connection with PoE •  ONVIF-Compliant •  IP66- and IK10-Rated for Outdoor Use •  Built-In Heater for Extreme Temperatures   Product Overview: The  C Series FD8382-EVF2 5MP Vandal-Resistant Outdoor Network Dome Camera  from  Vivotek  captures video during the day and at night thanks to integrated IR LEDs around the 2.8mm fixed lens. Its 1/3.2" progressive scan CMOS sensor allows the camera to record in 2560 x 1920 resolution at up to 15 fps. The camera is housed in an IP66- and IK10-rated enclosure for protection against dust, water, and impact, making it suitable for outdoor use, even in areas at risk of vandalism. This camera is equipped with a built-in heater for full operation in extreme cold weather conditions (-58°F). •  5MP progressive scan CMOS sensor captures 2560 x 1920 resolution video at up to 15 fps •  2.8mm fixed lens has a 118° diagonal field of view to monitor large areas •  Built-in IR LEDs for video of objects up to 98' away in extreme low light •  WDR for visibility in varying lighting conditions •  3D noise reduction •  Two-way audio communication via external microphone input and external line output •  Video rotation for corridor view •  IP66- and IK10-rated vandal-resistant enclosure for outdoor use •  Built-in heater for operation in temperatures ranging from -58 to 122°F

Description: Details iShopping.pk brings you the best price for Toa Electronics Wireless Wall Mount Receiver (IR-500R) with express shipping all over Pakistan.   The TOA IR-500R IR Wireless Wall Mount Receiver is intended for use with the TOA Infrared Wireless Microphone system. The IR-500R receives IR signal from the TOA handheld or hands-free microphone transmitters, and sends that signal to the IR-702T tuner (all sold separately). The receiver features a 50' (15m) range (line of sight), adjustable pick up angle and easily installs into a standard electrical wall box.   Features: • Wall-mounting brackets included •  Can be installed in an electrical circuit box •  Equipped with power indicator LED •  Reception area is up to approximately 49' line slight •  Infrared light reception angle can be changed   Specifications: Carrier Frequency Channel A: 3.100MHz  Channel B: 3.350MHz Range 50' (15m) Line of sight Angle of Coverage Vertical: 80° (up to 30° movable downward)  Horizontal: 80° up to 30° movable left or right) Connector 75 ohm BNC Connector Operating Temperature 0° C to +40° C (32° F to 104° F) Finish Filter Section: Polycarbonate, optical cut filter  Base: ABS resin, off-white Power 24V DC (Supplied from the IR-702T Tuner) Dimensions (WxHxD) 2.76 x 4.72 x 2.83" (70 x 120 x 72mm) Weight 0.49 lb (220 g)

Description: Details iShopping.pk brings you the best price for Toa Electronics Wireless Ceiling Mount Receiver (IR-510R) with express shipping all over Pakistan.   The TOA IR-510R IR Wireless Ceiling Mount Receiver is intended for use with the TOA Infrared Wireless Microphone system. The IR-510R receives IR signal from the TOA handheld or hands-free microphone transmitters, and sends that signal to the IR-702T tuner (all sold separately). The receiver features a 26' (7.92m) radial coverage range (line of sight), and includes ceiling mount brackets.   Features: • Ceiling-Mount brackets included • Equipped with power indicator LED • Covers a practical radius of approximately 26'   Specifications: Carrier Frequency Channel A: 3.100MHz  Channel B: 3.350MHz Range 26' (7.92m) Line of sight Connector 75 ohm BNC Connector Operating Temperature 0 to +40°C (32 to 104°F) Finish Filter Section: Polycarbonate, optical cut filter  Base: ABS resin, Black Power 24V DC (Supplied from the IR-702T Tuner) Dimensions (L x D) 2.81 x 4.72" (71.3 x 120mm) Weight 0.45 lb (205 g)

Description: Details iShopping.pk brings you the best price for Vivotek C Series 5MP Dome Camera with 2.8mm Fixed Lens (FD8182-F2) with 1 year international warranty and express shipping all over Pakistan.       Specification: System Information CPU Multimedia SoC (System-on-Chip) Flash Memory 1 GB RAM 4 GB Camera Features Image Sensor 1/3.2" Progressive CMOS Maximum Resolution 2560 x 1920 (5 MP) Lens Type Fixed focus Focal Length 2.8mm Aperture f/1.8 Field of View 90° (horizontal) 67° (vertical) 118° (diagonal) Shutter Time 1/5 to 1/32,000 sec WDR Technology WDR Enhanced Day/Night Removable IR cut filter for day & night function Minimum Illumination 0.39 lux at f/1.8 (color) 0.001 lux at f/1.8 (B/W) ePTZ 48x digital zoom (4x on IE plug-in, 12x built in) IR Illuminators 8 x IR LEDs built-in, effective up to 98' (30 m) with Smart IR Onboard Storage microSD/SDHC/SDXC card slot, seamless recording Video Compression H.264 & MJPEG Maximum Frame Rate In Both Compression Modes: 15 fps @ 2560 x 1920, 15 fps @ 2048 x 1536, 30 fps @ 1920 x 1080 Maximum Streams 4 simultaneous streams S/N Ratio 67 dB Dynamic Range Up to 70 dB Video Streaming Adjustable resolution, quality, and bit rate Smart Stream Image Settings Adjustable image size, quality and bit rate Time stamp, text overlay, flip & mirror Configurable brightness, contrast, saturation, sharpness, white balance, exposure control, gain, backlight compensation, privacy masks Scheduled profile settings, 3D noise reduction, video rotation, defog Audio Audio Capability Two-way audio (full duplex) Compression G.711, G.726 Interface External line input/output Built-in microphone Network Users Live viewing for up to 10 clients Protocols IPv4, IPv6, TCP/IP, HTTP, HTTPS, UPnP, RTSP/RTP/RTCP, IGMP, SMTP, FTP, DHCP, NTP, DNS, DDNS, PPPoE, CoS, QoS, SNMP, 802.1X, UDP, ICMP, ARP, SSL, TLS Interface 10Base-T/100 BaseTX Ethernet (RJ45) ONVIF Supported Intelligent Video Video Motion Detection Five-window video motion detection VCA Line crossing detection, field detection, loitering detection VCA not preinstalled, can be downloaded from the Vivotek website Alarm and Event Alarm Triggers Video motion detection, manual trigger, digital input, periodical trigger, system boot, recording notification, camera tampering detection, audio detection Alarm Events Event notification using digital output, HTTP, SMTP, FTP, NAS server, SD card File upload via HTTP, SMTP, FTP and NAS server, SD card General Connectors RJ45 for Network/PoE connection Audio input Audio output 12 VDC power input 1 x Digital input 1 x Digital output LED Indicator System power and status indicator Power Input 12 VDC IEEE 802.3af/at PoE Class 0 Power Consumption Maximum: 9 W Certifications CE, LVD, FCC Class B, VCCI, C-Tick Operating Temperature Starting Temperature: 32 to 122°F (0 to 50°C) Working Temperature: 14 to 122°F (-10 to 50°C) System Requirements Operating System Microsoft Windows 7/8/Vista/XP/2000 Web Browser Mozilla Firefox 7 to 43 (streaming only) Internet Explorer 7/8/9/10/11 Other Players VLC: 1.1.11 or above QuickTime: 7 or above Physical Dimensions (Ø x H) 5.4 x 4" (13.8 x 10.3 cm) Weight 19 oz (541 g)     Product Overview: The  FD8182-F2 C Series 5MP Fixed Network Dome Camera  from  Vivotek  comes with a CMOS sensor and a 2.8mm fixed lens for capturing videos at a maximum resolution of 2560 x 1920 (at 15 fps). To meet the demands of indoor applications, the camera features a built-in PIR sensor to help detect unexpected events and provide security in real time. With the help of 3D noise reduction and Smart Stream technologies, the camera can optimize the resolution for a desired object or area to maximize the efficiency of bandwidth usage. The FD8182-F2 day / night camera provides 24-hour surveillance thanks to the removable IR cut filter and IR illuminators with a range of up to 98'. Using the flexible VADP (Vivotek Application Development Platform), users can extend the features of this camera by adding third-party applications. •  5MP CMOS sensor •  Frame rate of up to 15 fps at 2560 x 1920 •  2.8mm fixed focus lens •  Built-in IR illuminators are effective up to 98' •  Enhanced WDR for improved visibility in extremely bright and dark environments •  Smart Stream technology for efficient bandwidth usage •  3D noise reduction •  Two-way audio support with built-in mic and external line out (speaker not included) •  Video rotation for corridor view •  Built-in PIR sensor •  Vivotek VCA (Video Content Analysis) support

Description: Details iShopping.pk brings you the best price for Hikvision Value Series 3MP Cube Night Vision Camera with 2.8mm Lens (DS-2CD2432F) with 1 year international warranty and express shipping all over Pakistan.     Specification: Camera Image Sensor 1/3" progressive scan CMOS sensor Minimum Illumination Color: 0.28 at f/2.0 B&W: 0 lux with IR LED on Shutter Speed 1/3 to 100,000 sec Lens 2.8mm at f/2.0 Lens Mount M12 Field of View Horizontal: 86° Adjustments 3-axis Day/Night IR cut filter with auto-switch Backlight Compensation Supported, zone configurable Wide Dynamic Range DWDR Number of IR LEDs and Range 1 x IR LED, up to 33' (10 m) Video Compression H.264 and MJPEG Resolution 2048 x 1536 Frame Rate 20 fps at 2048 x 1536 30 fps at 1920 x 1080 Bit Rate 32 kbps to 12 Mbps Streaming Dual Image Settings Rotate mode, saturation, brightness, contrast, sharpness adjustable by client software or web Region of Interest Supported Audio Compression G.711, G.722.1, G.726, MP2L2 Bit Rate 64 kbps (G.711), 16 kbps (G.722.1), 16 kbps (G.726), 32-128 kbps (MP2L2) Interface Built-in microphone and speaker Alarm Interface 1 x input, 1 x output Network Interface RJ45 10/100M Ethernet Storage NAS (supports NFS, SMB/CIFS) (available separately) Alarm Triggers Line crossing, intrusion detection, motion detection, dynamic analysis, tampering alarm, network disconnect, IP address conflict, storage exception Protocols TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1x, QoS, IPv6, Bonjour Interoperability ONVIF, PSIA, CGI, ISAPI Storage Memory Card Support microSD card up to 128 GB (available separately) Wireless Standard IEEE 802.11b/g/n Frequency Range 2.4-2.4835 GHz Channel Bandwidth 20/40 MHz Modulation Mode 802.11b: CCK, QPSK, BPSK 802.11g/n: OFDM Security 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK, WPS Transmit Power 11b: 17±1.5 dBm at 11 Mbps 11g: 14±1.5 dBm at 54 Mbps 11n: 12.5±1.5 dBm Receive Sensitivity Typical: 11b: -90 dBm at 11 Mbps 11g: -75 dBm at 54 Mpbs 11n: -74 dBm Transmission Rate 11b: 11 Mbps 11g: 54 Mbps 11n: Up to 150 Mbps Range Up to 164' (50 m) Motion Sensor Type PIR Field of View 80° Range 33' (10 m) General Certifications UL, cUL Power Supply 12 VDC PoE (802.3af) Power Consumption 5 W Operating Temperature 32 to 104°F (0 to 40°C) Operating Humidity ≤95%, non-condensing Dimensions 2.9 x 3.6 x 5.2" (72 x 92 x 131 mm) Weight 0.9 lb (0.4 kg)   Product Description: •  2048 x 1536 Resolution at 20 fps •  IR Cut Filter •  IR LED for Night Vision Up to 33' •  2.8mm Fixed Lens •  86° Horizonal Field of View •  Built-in Microphone and Speaker •  Built-in PIR Sensor for Motion Detection •  microSD Slot Supports Up to 128GB •  Wi-Fi Connectivity and PoE Connection •  ONVIF-Compliant   Product Overview: Monitor an indoor area with the  Value Series 3MP Wi-Fi Network Cube Camera with 2.8mm Lens and Night Vision  from  Hikvision. Featuring a 3MP 1/3" progressive scan CMOS sensor and a 2.8mm lens, this camera can capture 2048 x 1536 resolution video at up to 20 fps in a 86° field of view. Wi-Fi connectivity makes installation quick and eliminates the need for additional cable runs. H.264 and MJPEG compression ensure high-quality recording and playback while optimizing network bandwidth. A built-in microphone and speaker allow two-way communication, while the IR LED allows the camera to produce clear images at night from up to 33' away. Store video onto a microSD card (available separately) up to 128GB via the microSD slot. •  3MP 1/3" progressive scan CMOS sensor captures 2048 x 1536 resolution video at up to 20 fps •  IR LED for night vision up to 33' •  Built-in PIR sensor for accurate motion detection •  Built-in microphone and speaker •  Digital wide dynamic range, backlight compensation, and 3D digital noise reduction help the camera produce accurate images in varying lighting conditions •  Wi-Fi connectivity for quick setup •  microSD slot supports up to 128GB