Level bachelor

OTHM Level 6 Diploma in Occupational Health & Safety in Islamabad, Rawalpindi, Karachi, Peshawar, Lahore and Pakistan O3165643400, O3119903317 The objective of the OTHM Level 6 Diploma in Health and Social Care Management qualification is to equip learners with the underpinning knowledge, understanding and skills required for a career in the health and social care sector at a managerial level. The programme enables learners to demonstrate their skills by producing evidence from their work activities, to meet national occupational standards. Learners will acquire care management skills in the Health and Social Care sector. OTHM qualifications at RQF Level 6 represent practical knowledge, skills, capabilities and competences that are assessed in academic terms as being equivalent to Bachelor’s Degrees with Honours, Bachelor’s Degrees, Professional Graduate Certificate in Education (PGCE), Graduate Diplomas and Graduate Certificates. The Diploma in Occupational Health and Safety Management – Level 6 (Accredited by Eduqual, UK) is a qualification for aspiring health and safety professionals. It is aimed at learners who are responsible for developing and applying health and safety procedures day-to-day in an organisation. They are likely to be managers looking to improve their knowledge and skills. Qualifications Our qualifications are made up of the Regulated Qualification Framework (RQF) rules which provides flexible ways to get a qualification. Qualifications at the same level are a similar level of difficulty, but the size and content of the qualifications can vary. The Level 4, 5 and 6 diploma qualifications are equivalent to Year 1, 2 and 3 (Final year) respectively of a three-year UK Bachelor’s degree. Each level consists of 120 credits. Completing any of the level 4, 5 and 6 qualifications will enable learners a progression to the next level of higher education at UK universities. The Level 6 qualifications in Clinical Aesthetic Injectable Therapies are designed to enable learners / practitioners to provide the highest standards of patient and client care during all stages of delivering cosmetic / aesthetic injectable therapies. By achieving these qualifications, learners will acquire the knowledge, skills and competence to administer treatments safely and appropriately, adhering to the principles of ‘do no harm’ and promoting public health at all times. Registered healthcare professionals e.g. doctors, dentists, nurse prescribers, allied health professionals, independent pharmacist prescribers. In addition to formal identification documentation and previous qualification certificates, learners must produce evidence of registration with an appropriate professional body* e.g. GMC, GDC, NMC.HCPC Registered healthcare professionals from any group who do not hold prescribing rights must provide evidence of working under the clinical oversight of a professional who has regulated prescribing rights. *Learners may not be registered for either qualification if they have any conditions noted on their professional body (PRSB) registration. OTHM require centres to check applicants’ status with regards to PRSB registration prior to registration on the qualification and evidence of this retained for scrutiny by OTHM. Nurses and Allied-healthcare professionals (and those registered with the Health and Care Professions Council) who are not independent prescribers are subject to CPSA / JCCP requirements for working under the clinical oversight of an appropriate professional i.e. they must have access to, and support from, experienced clinicians who are able to deal with medical emergency situations and complications and, have independent prescribing rights. Applicants registered with non UK regulatory bodies Applicants who provide evidence of registration on non UK regulatory bodies e.g. The Medical Board of Australia; will have their registration confirmed and vetted on that register and their eligibility to practice in the UK must be confirmed through the appropriate professional register. If there is no evidence of registration, or conditions are noted on that registration, the applicant will not be eligible to register for the qualification. Non UK regulatory bodies must be nationally recognised to be considered a suitable register. Each application will be evaluated on a case by case or individual basis. English requirements: If a learner is not from a majority English-speaking country, they must provide evidence of English language competency. For more information visit English Language Expectations page in the OTHM website. Equivalences OTHM qualifications at RQF Level 7 represent practical knowledge, skills, capabilities and competences that are assessed in academic terms as being equivalent in level to Master’s Degrees, Integrated Master’s Degrees, Postgraduate Diplomas, Postgraduate Certificate in Education (PGCE) and Postgraduate Certificates. Overview Accounting and finance are at the very heart of business operations. From banking to manufacturing, from huge service industries to micro businesses, the ability to manage, plan and account for money is still the ultimate measure of business success and the key driver of growth. Many accountants occupy key managerial positions in business, yet few are qualified managers. In the increasingly complex modern business environment, there is a high demand for skilled professionals who can work flexibly in teams across business boundaries. The objective of the OTHM Level 6 Diploma in Accounting and Business qualification is to provide learners with the knowledge and skills required by a middle or senior manager in an organisation, and who may be involved in managing organisational finances, investment and risk, audit and assurance, or research. Entry requirements For entry onto the OTHM Level 6 Diploma in Accounting and Business qualification, learners must possess: Relevant NQF/QCF/RQF Level 5 diploma or equivalent recognised qualification Mature learners (over 21) with management experience (learners must check with the delivery centre regarding this experience prior to registering for the programme) Learner must be 18 years or older at the beginning of the course English requirements: If a learner is not from a majority English-speaking country must provide evidence of English language competency. For more information visit English Language Expectations page in this website Equivalences OTHM qualifications at RQF Level 6 represent practical knowledge, skills, capabilities and competences that are assessed in academic terms as being equivalent to Bachelor’s Degrees with Honors, Bachelor’s Degrees, Professional Graduate Certificate in Education (PGCE), Graduate Diplomas and Graduate Certificates. The level 6 Diploma in Occupational Health and Safety is a qualification for aspiring health and safety professionals. It is aimed at learners who are responsible for developing and applying health and safety procedures day-to-day in an organization. They are likely to be managers looking to improve their knowledge and skills. The Diploma is designed to provide learners with the expertise required to undertake a career as a health and safety practitioner and it also provides a sound basis for progression to postgraduate study. OTHM Level 6 Diploma in Occupational Health & safety in Islamabad, OTHM Level 6 Diploma in Occupational Health & safety in Rawalpindi, OTHM Level 6 Diploma in Occupational Health & safety in Gujranwala, OTHM Level 6 Diploma in Occupational Health & safety in Sialkot, OTHM Level 6 Diploma in Occupational Health & safety in Sargodha, OTHM Level 6 Diploma in Occupational Health & safety in Gujrat, OTHM Level 6 Diploma in Occupational Health & safety in Lahore, OTHM Level 6 Diploma in Occupational Health & safety in Faisalabad, OTHM Level 6 Diploma in Occupational Health & safety in Multan, OTHM Level 6 Diploma in Occupational Health & safety in Mandi Bahauddin, OTHM Level 6 Diploma in Occupational Health & safety in Bahawalpur, OTHM Level 6 Diploma in Occupational Health & safety in Attock, OTHM Level 6 Diploma in Occupational Health & safety in Chakwal, OTHM Level 6 Diploma in Occupational Health & safety in Mirpur, OTHM Level 6 Diploma in Occupational Health & safety in Bagh, OTHM Level 6 Diploma in Occupational Health & safety in Rawala kot, OTHM Level 6 Diploma in Occupational Health & safety in Kotli, OTHM Level 6 Diploma in Occupational Health & safety in Karachi, OTHM Level 6 Diploma in Occupational Health & safety in Hyderabad, OTHM Level 6 Diploma in Occupational Health & safety in Mardan, OTHM Level 6 Diploma in Occupational Health & safety in Peshawar, OTHM Level 6 Diploma in Occupational Health & safety in Swat, OTHM Level 6 Diploma in Occupational Health & safety in Rawat, OTHM Level 6 Diploma in Occupational Health & safety in Sawabi, OTHM Level 6 Diploma in Occupational Health & safety in Sahiwal, OTHM Level 6 Diploma in Occupational Health & safety in Sakkar, OTHM Level 6 Diploma in Occupational Health & safety in Haripur, OTHM Level 6 Diploma in Occupational Health & safety in Pakistan O3165643400, O3119903317,

OTHM Level 6 Diploma in Occupational Health & safety in Islamabad, OTHM Level 6 Diploma in Occupational Health & safety in Rawalpindi, OTHM Level 6 Diploma in Occupational Health & safety in Gujranwala, OTHM Level 6 Diploma in Occupational Health & safety in Sialkot, OTHM Level 6 Diploma in Occupational Health & safety in Sargodha, OTHM Level 6 Diploma in Occupational Health & safety in Gujrat, OTHM Level 6 Diploma in Occupational Health & safety in Lahore, OTHM Level 6 Diploma in Occupational Health & safety in Faisalabad, OTHM Level 6 Diploma in Occupational Health & safety in Multan, OTHM Level 6 Diploma in Occupational Health & safety in Mandi Bahauddin, OTHM Level 6 Diploma in Occupational Health & safety in Bahawalpur, OTHM Level 6 Diploma in Occupational Health & safety in Attock, OTHM Level 6 Diploma in Occupational Health & safety in Chakwal, OTHM Level 6 Diploma in Occupational Health & safety in Mirpur, OTHM Level 6 Diploma in Occupational Health & safety in Bagh, OTHM Level 6 Diploma in Occupational Health & safety in Rawala kot, OTHM Level 6 Diploma in Occupational Health & safety in Kotli, OTHM Level 6 Diploma in Occupational Health & safety in Karachi, OTHM Level 6 Diploma in Occupational Health & safety in Hyderabad, OTHM Level 6 Diploma in Occupational Health & safety in Mardan, OTHM Level 6 Diploma in Occupational Health & safety in Peshawar, OTHM Level 6 Diploma in Occupational Health & safety in Swat, OTHM Level 6 Diploma in Occupational Health & safety in Rawat, OTHM Level 6 Diploma in Occupational Health & safety in Sawabi, OTHM Level 6 Diploma in Occupational Health & safety in Sahiwal, OTHM Level 6 Diploma in Occupational Health & safety in Sakkar, OTHM Level 6 Diploma in Occupational Health & safety in Haripur, OTHM Level 6 Diploma in Occupational Health & safety in Pakistan O3165643400, O3119903317,OTHM Level 6 Diploma in Occupational Health & Safety in Islamabad, Rawalpindi, Karachi, Peshawar, Lahore and Pakistan O3165643400, O3119903317 The objective of the OTHM Level 6 Diploma in Health and Social Care Management qualification is to equip learners with the underpinning knowledge, understanding and skills required for a career in the health and social care sector at a managerial level. The programme enables learners to demonstrate their skills by producing evidence from their work activities, to meet national occupational standards. Learners will acquire care management skills in the Health and Social Care sector. OTHM qualifications at RQF Level 6 represent practical knowledge, skills, capabilities and competences that are assessed in academic terms as being equivalent to Bachelor’s Degrees with Honours, Bachelor’s Degrees, Professional Graduate Certificate in Education (PGCE), Graduate Diplomas and Graduate Certificates. The Diploma in Occupational Health and Safety Management – Level 6 (Accredited by Eduqual, UK) is a qualification for aspiring health and safety professionals. It is aimed at learners who are responsible for developing and applying health and safety procedures day-to-day in an organisation. They are likely to be managers looking to improve their knowledge and skills. Qualifications Our qualifications are made up of the Regulated Qualification Framework (RQF) rules which provides flexible ways to get a qualification. Qualifications at the same level are a similar level of difficulty, but the size and content of the qualifications can vary. The Level 4, 5 and 6 diploma qualifications are equivalent to Year 1, 2 and 3 (Final year) respectively of a three-year UK Bachelor’s degree. Each level consists of 120 credits. Completing any of the level 4, 5 and 6 qualifications will enable learners a progression to the next level of higher education at UK universities. The Level 6 qualifications in Clinical Aesthetic Injectable Therapies are designed to enable learners / practitioners to provide the highest standards of patient and client care during all stages of delivering cosmetic / aesthetic injectable therapies. By achieving these qualifications, learners will acquire the knowledge, skills and competence to administer treatments safely and appropriately, adhering to the principles of ‘do no harm’ and promoting public health at all times. Registered healthcare professionals e.g. doctors, dentists, nurse prescribers, allied health professionals, independent pharmacist prescribers. In addition to formal identification documentation and previous qualification certificates, learners must produce evidence of registration with an appropriate professional body* e.g. GMC, GDC, NMC.HCPC Registered healthcare professionals from any group who do not hold prescribing rights must provide evidence of working under the clinical oversight of a professional who has regulated prescribing rights. *Learners may not be registered for either qualification if they have any conditions noted on their professional body (PRSB) registration. OTHM require centres to check applicants’ status with regards to PRSB registration prior to registration on the qualification and evidence of this retained for scrutiny by OTHM. Nurses and Allied-healthcare professionals (and those registered with the Health and Care Professions Council) who are not independent prescribers are subject to CPSA / JCCP requirements for working under the clinical oversight of an appropriate professional i.e. they must have access to, and support from, experienced clinicians who are able to deal with medical emergency situations and complications and, have independent prescribing rights. Applicants registered with non UK regulatory bodies Applicants who provide evidence of registration on non UK regulatory bodies e.g. The Medical Board of Australia; will have their registration confirmed and vetted on that register and their eligibility to practice in the UK must be confirmed through the appropriate professional register. If there is no evidence of registration, or conditions are noted on that registration, the applicant will not be eligible to register for the qualification. Non UK regulatory bodies must be nationally recognised to be considered a suitable register. Each application will be evaluated on a case by case or individual basis. English requirements: If a learner is not from a majority English-speaking country, they must provide evidence of English language competency. For more information visit English Language Expectations page in the OTHM website. Equivalences OTHM qualifications at RQF Level 7 represent practical knowledge, skills, capabilities and competences that are assessed in academic terms as being equivalent in level to Master’s Degrees, Integrated Master’s Degrees, Postgraduate Diplomas, Postgraduate Certificate in Education (PGCE) and Postgraduate Certificates. Overview Accounting and finance are at the very heart of business operations. From banking to manufacturing, from huge service industries to micro businesses, the ability to manage, plan and account for money is still the ultimate measure of business success and the key driver of growth. Many accountants occupy key managerial positions in business, yet few are qualified managers. In the increasingly complex modern business environment, there is a high demand for skilled professionals who can work flexibly in teams across business boundaries. The objective of the OTHM Level 6 Diploma in Accounting and Business qualification is to provide learners with the knowledge and skills required by a middle or senior manager in an organisation, and who may be involved in managing organisational finances, investment and risk, audit and assurance, or research. Entry requirements For entry onto the OTHM Level 6 Diploma in Accounting and Business qualification, learners must possess: Relevant NQF/QCF/RQF Level 5 diploma or equivalent recognised qualification Mature learners (over 21) with management experience (learners must check with the delivery centre regarding this experience prior to registering for the programme) Learner must be 18 years or older at the beginning of the course English requirements: If a learner is not from a majority English-speaking country must provide evidence of English language competency. For more information visit English Language Expectations page in this website Equivalences OTHM qualifications at RQF Level 6 represent practical knowledge, skills, capabilities and competences that are assessed in academic terms as being equivalent to Bachelor’s Degrees with Honors, Bachelor’s Degrees, Professional Graduate Certificate in Education (PGCE), Graduate Diplomas and Graduate Certificates. The level 6 Diploma in Occupational Health and Safety is a qualification for aspiring health and safety professionals. It is aimed at learners who are responsible for developing and applying health and safety procedures day-to-day in an organization. They are likely to be managers looking to improve their knowledge and skills. The Diploma is designed to provide learners with the expertise required to undertake a career as a health and safety practitioner and it also provides a sound basis for progression to postgraduate study.

OTHM Level 6 Diploma in Occupational Health & safety in Islamabad, OTHM Level 6 Diploma in Occupational Health & safety in Rawalpindi, OTHM Level 6 Diploma in Occupational Health & safety in Gujranwala, OTHM Level 6 Diploma in Occupational Health & safety in Sialkot, OTHM Level 6 Diploma in Occupational Health & safety in Sargodha, OTHM Level 6 Diploma in Occupational Health & safety in Gujrat, OTHM Level 6 Diploma in Occupational Health & safety in Lahore, OTHM Level 6 Diploma in Occupational Health & safety in Faisalabad, OTHM Level 6 Diploma in Occupational Health & safety in Multan, OTHM Level 6 Diploma in Occupational Health & safety in Mandi Bahauddin, OTHM Level 6 Diploma in Occupational Health & safety in Bahawalpur, OTHM Level 6 Diploma in Occupational Health & safety in Attock, OTHM Level 6 Diploma in Occupational Health & safety in Chakwal, OTHM Level 6 Diploma in Occupational Health & safety in Mirpur, OTHM Level 6 Diploma in Occupational Health & safety in Bagh, OTHM Level 6 Diploma in Occupational Health & safety in Rawala kot, OTHM Level 6 Diploma in Occupational Health & safety in Kotli, OTHM Level 6 Diploma in Occupational Health & safety in Karachi, OTHM Level 6 Diploma in Occupational Health & safety in Hyderabad, OTHM Level 6 Diploma in Occupational Health & safety in Mardan, OTHM Level 6 Diploma in Occupational Health & safety in Peshawar, OTHM Level 6 Diploma in Occupational Health & safety in Swat, OTHM Level 6 Diploma in Occupational Health & safety in Rawat, OTHM Level 6 Diploma in Occupational Health & safety in Sawabi, OTHM Level 6 Diploma in Occupational Health & safety in Sahiwal, OTHM Level 6 Diploma in Occupational Health & safety in Sakkar, OTHM Level 6 Diploma in Occupational Health & safety in Haripur, OTHM Level 6 Diploma in Occupational Health & safety in Pakistan O3165643400, O3119903317,OTHM Level 6 Diploma in Occupational Health & Safety in Islamabad, Rawalpindi, Karachi, Peshawar, Lahore and Pakistan O3165643400, O3119903317OTHM qualifications at RQF Level 6 represent practical knowledge, skills, capabilities and competences that are assessed in academic terms as being equivalent to Bachelor’s Degrees with Honours, Bachelor’s Degrees, Professional Graduate Certificate in Education (PGCE), Graduate Diplomas and Graduate Certificates. The Diploma in Occupational Health and Safety Management – Level 6 (Accredited by Eduqual, UK) is a qualification for aspiring health and safety professionals. It is aimed at learners who are responsible for developing and applying health and safety procedures day-to-day in an organisation. They are likely to be managers looking to improve their knowledge and skills. Qualifications Our qualifications are made up of the Regulated Qualification Framework (RQF) rules which provides flexible ways to get a qualification. Qualifications at the same level are a similar level of difficulty, but the size and content of the qualifications can vary. The Level 4, 5 and 6 diploma qualifications are equivalent to Year 1, 2 and 3 (Final year) respectively of a three-year UK Bachelor’s degree. Each level consists of 120 credits. Completing any of the level 4, 5 and 6 qualifications will enable learners a progression to the next level of higher education at UK universities. The Level 6 qualifications in Clinical Aesthetic Injectable Therapies are designed to enable learners / practitioners to provide the highest standards of patient and client care during all stages of delivering cosmetic / aesthetic injectable therapies. By achieving these qualifications, learners will acquire the knowledge, skills and competence to administer treatments safely and appropriately, adhering to the principles of ‘do no harm’ and promoting public health at all times. Registered healthcare professionals e.g. doctors, dentists, nurse prescribers, allied health professionals, independent pharmacist prescribers. In addition to formal identification documentation and previous qualification certificates, learners must produce evidence of registration with an appropriate professional body* e.g. GMC, GDC, NMC.HCPC Registered healthcare professionals from any group who do not hold prescribing rights must provide evidence of working under the clinical oversight of a professional who has regulated prescribing rights. *Learners may not be registered for either qualification if they have any conditions noted on their professional body (PRSB) registration. OTHM require centres to check applicants’ status with regards to PRSB registration prior to registration on the qualification and evidence of this retained for scrutiny by OTHM. Nurses and Allied-healthcare professionals (and those registered with the Health and Care Professions Council) who are not independent prescribers are subject to CPSA / JCCP requirements for working under the clinical oversight of an appropriate professional i.e. they must have access to, and support from, experienced clinicians who are able to deal with medical emergency situations and complications and, have independent prescribing rights. Applicants registered with non UK regulatory bodies Applicants who provide evidence of registration on non UK regulatory bodies e.g. The Medical Board of Australia; will have their registration confirmed and vetted on that register and their eligibility to practice in the UK must be confirmed through the appropriate professional register. If there is no evidence of registration, or conditions are noted on that registration, the applicant will not be eligible to register for the qualification. Non UK regulatory bodies must be nationally recognised to be considered a suitable register. Each application will be evaluated on a case by case or individual basis. English requirements: If a learner is not from a majority English-speaking country, they must provide evidence of English language competency. For more information visit English Language Expectations page in the OTHM website. Equivalences OTHM qualifications at RQF Level 7 represent practical knowledge, skills, capabilities and competences that are assessed in academic terms as being equivalent in level to Master’s Degrees, Integrated Master’s Degrees, Postgraduate Diplomas, Postgraduate Certificate in Education (PGCE) and Postgraduate Certificates. Overview Accounting and finance are at the very heart of business operations. From banking to manufacturing, from huge service industries to micro businesses, the ability to manage, plan and account for money is still the ultimate measure of business success and the key driver of growth. Many accountants occupy key managerial positions in business, yet few are qualified managers. In the increasingly complex modern business environment, there is a high demand for skilled professionals who can work flexibly in teams across business boundaries. The objective of the OTHM Level 6 Diploma in Accounting and Business qualification is to provide learners with the knowledge and skills required by a middle or senior manager in an organisation, and who may be involved in managing organisational finances, investment and risk, audit and assurance, or research. Entry requirements For entry onto the OTHM Level 6 Diploma in Accounting and Business qualification, learners must possess: Relevant NQF/QCF/RQF Level 5 diploma or equivalent recognised qualification Mature learners (over 21) with management experience (learners must check with the delivery centre regarding this experience prior to registering for the programme) Learner must be 18 years or older at the beginning of the course English requirements: If a learner is not from a majority English-speaking country must provide evidence of English language competency. For more information visit English Language Expectations page in this website Equivalences OTHM qualifications at RQF Level 6 represent practical knowledge, skills, capabilities and competences that are assessed in academic terms as being equivalent to Bachelor’s Degrees with Honors, Bachelor’s Degrees, Professional Graduate Certificate in Education (PGCE), Graduate Diplomas and Graduate Certificates. The level 6 Diploma in Occupational Health and Safety is a qualification for aspiring health and safety professionals. It is aimed at learners who are responsible for developing and applying health and safety procedures day-to-day in an organization. They are likely to be managers looking to improve their knowledge and skills. The Diploma is designed to provide learners with the expertise required to undertake a career as a health and safety practitioner and it also provides a sound basis for progression to postgraduate study.

OTHM Level 6 Diploma in Occupational Health & Safety in Islamabad, Rawalpindi, Karachi, Peshawar, Lahore and Pakistan O3165643400, O3119903317Qualifications Our qualifications are made up of the Regulated Qualification Framework (RQF) rules which provides flexible ways to get a qualification. Qualifications at the same level are a similar level of difficulty, but the size and content of the qualifications can vary. The Level 4, 5 and 6 diploma qualifications are equivalent to Year 1, 2 and 3 (Final year) respectively of a three-year UK Bachelor’s degree. Each level consists of 120 credits. Completing any of the level 4, 5 and 6 qualifications will enable learners a progression to the next level of higher education at UK universities. The Level 6 qualifications in Clinical Aesthetic Injectable Therapies are designed to enable learners / practitioners to provide the highest standards of patient and client care during all stages of delivering cosmetic / aesthetic injectable therapies. By achieving these qualifications, learners will acquire the knowledge, skills and competence to administer treatments safely and appropriately, adhering to the principles of ‘do no harm’ and promoting public health at all times. Registered healthcare professionals e.g. doctors, dentists, nurse prescribers, allied health professionals, independent pharmacist prescribers. In addition to formal identification documentation and previous qualification certificates, learners must produce evidence of registration with an appropriate professional body* e.g. GMC, GDC, NMC.HCPC Registered healthcare professionals from any group who do not hold prescribing rights must provide evidence of working under the clinical oversight of a professional who has regulated prescribing rights. *Learners may not be registered for either qualification if they have any conditions noted on their professional body (PRSB) registration. OTHM require centres to check applicants’ status with regards to PRSB registration prior to registration on the qualification and evidence of this retained for scrutiny by OTHM. Nurses and Allied-healthcare professionals (and those registered with the Health and Care Professions Council) who are not independent prescribers are subject to CPSA / JCCP requirements for working under the clinical oversight of an appropriate professional i.e. they must have access to, and support from, experienced clinicians who are able to deal with medical emergency situations and complications and, have independent prescribing rights. The objective of the OTHM Level 6 Diploma in Health and Social Care Management qualification is to equip learners with the underpinning knowledge, understanding and skills required for a career in the health and social care sector at a managerial level. The programme enables learners to demonstrate their skills by producing evidence from their work activities, to meet national occupational standards. Learners will acquire care management skills in the Health and Social Care sector. OTHM qualifications at RQF Level 6 represent practical knowledge, skills, capabilities and competences that are assessed in academic terms as being equivalent to Bachelor’s Degrees with Honours, Bachelor’s Degrees, Professional Graduate Certificate in Education (PGCE), Graduate Diplomas and Graduate Certificates. The Diploma in Occupational Health and Safety Management – Level 6 (Accredited by Eduqual, UK) is a qualification for aspiring health and safety professionals. It is aimed at learners who are responsible for developing and applying health and safety procedures day-to-day in an organisation. They are likely to be managers looking to improve their knowledge and skills.OTHM Level 6 Diploma in Occupational Health & safety in Islamabad, OTHM Level 6 Diploma in Occupational Health & safety in Rawalpindi, OTHM Level 6 Diploma in Occupational Health & safety in Gujranwala, OTHM Level 6 Diploma in Occupational Health & safety in Sialkot, OTHM Level 6 Diploma in Occupational Health & safety in Sargodha, OTHM Level 6 Diploma in Occupational Health & safety in Gujrat, OTHM Level 6 Diploma in Occupational Health & safety in Lahore, OTHM Level 6 Diploma in Occupational Health & safety in Faisalabad, OTHM Level 6 Diploma in Occupational Health & safety in Multan, OTHM Level 6 Diploma in Occupational Health & safety in Mandi Bahauddin, OTHM Level 6 Diploma in Occupational Health & safety in Bahawalpur, OTHM Level 6 Diploma in Occupational Health & safety in Attock, OTHM Level 6 Diploma in Occupational Health & safety in Chakwal, OTHM Level 6 Diploma in Occupational Health & safety in Mirpur, OTHM Level 6 Diploma in Occupational Health & safety in Bagh, OTHM Level 6 Diploma in Occupational Health & safety in Rawala kot, OTHM Level 6 Diploma in Occupational Health & safety in Kotli, OTHM Level 6 Diploma in Occupational Health & safety in Karachi, OTHM Level 6 Diploma in Occupational Health & safety in Hyderabad, OTHM Level 6 Diploma in Occupational Health & safety in Mardan, OTHM Level 6 Diploma in Occupational Health & safety in Peshawar, OTHM Level 6 Diploma in Occupational Health & safety in Swat, OTHM Level 6 Diploma in Occupational Health & safety in Rawat, OTHM Level 6 Diploma in Occupational Health & safety in Sawabi, OTHM Level 6 Diploma in Occupational Health & safety in Sahiwal, OTHM Level 6 Diploma in Occupational Health & safety in Sakkar, OTHM Level 6 Diploma in Occupational Health & safety in Haripur, OTHM Level 6 Diploma in Occupational Health & safety in Pakistan O3165643400, O3119903317,

OTHM Level 6 Safety Diploma in Rawalpindi O3315999937 The OTHM Level 6 Diploma in Information Technology is designed to ensure that each learner is a confident, independent thinker with a detailed knowledge of Information Technology, and equipped with the skills to adapt rapidly to change at a junior or middle management level and aspiring into higher management within their organization or industry. The qualification is ideal for those who have started, or are planning to move into, a career in private or public sector business. The objective of the OTHM Level 6 Diploma in Health and Social Care Management qualification is to equip learners with the underpinning knowledge, understanding and skills required for a career in the health and social care sector at a managerial level. Health courses are always very useful for your career. Study Level 6 Diploma In health and social care management. The Diploma in health and social care management enables learners to demonstrate their skills by producing evidence from their work activities, to meet national occupational standards. Learners will acquire care management skills in the Health and Social Care sector. OTHM, online diploma in heath and social care management, health courses. The Level 6 qualifications in Occupational Health and Safety are developed to provide learners who have or are looking to develop into a senior role in an organization for managing health and safety policy and practice. Learners will gain the skills and knowledge to understand the legal and regulatory background to occupational health and safety policy, to be able to assess policies, as well as to recommend and implement policy changes. Learners will develop knowledge and skills relevant to putting policy into practice, utilising management systems, resources, risk and incident management, leadership, management and skills development. OVERVIEW The Level 6 qualifications in Occupational Health and Safety are developed to provide learners who have or are looking to develop into a senior role in an organization for managing health and safety policy and practice. Learners will gain the skills and knowledge to understand the legal and regulatory background to occupational health and safety policy, to be able to assess policies, as well as to recommend and implement policy changes. Learners will develop knowledge and skills relevant to putting policy into practice, utilizing management systems, resources, risk and incident management, leadership, management and skills development. ENTRY REQUIREMENT For entry onto the OTHM Level 6 Diploma in Occupational Health and Safety qualification, learners must possess: Relevant NQF/QCF/RQF certificate or diploma or equivalent recognized qualification that covers the following basic concepts within Occupational Health & Safety: Science and Technology Legal and regulatory systems Workplace safety and health Definitions of risk and risk management principles Principles and theories of safety and health management Occupational health and hygiene Occupational psychology Information technology, literacy and numeracy Qualifications that fulfill this requirement include: British Safety Council Level 3 Certificate in Occupational Safety and Health British Safety Council International Certificate in Occupational Safety and Health NCFE IOSH Level 3 Certificate in Safety and Health for Business NCRQ Level 6 Certificate in Applied Health and Safety NEBOSH National General Certificate in Occupational Health and Safety Mature learners (over 21) with practical experience at least 2 years Learner must be 18 years or older at the beginning of the course EQUIVALENCES OTHM qualifications at RQF Level 6 represent practical knowledge, skills, capabilities and competences that are assessed in academic terms as being equivalent level to Bachelor’s Degrees with Honours, Bachelor’s Degrees, Professional Graduate Certificate in Education (PGCE), Graduate Diplomas and Graduate Certificates COURSE CONTENTS The Level 6 Diploma in Occupational Health and Safety consists of 6 mandatory units for a combined total of 48 credits for the completed qualification. Health and Safety Management Principles and Policy (8 credits) Health and Safety Management Practice (10 credits) Risk and Incident Management (8 credits) Promoting a Positive Health and Safety Culture (6 credits) Main taining a Safe Workplace Environment (12 credits) Health and Safety Law, Regulation and Influence (8 credits) Development of the Health and Safety Practitioner (8 credits) OTHM Level 6 Safety Diploma in Islamabad, OTHM Level 6 Safety Diploma in Rawalpindi, OTHM Level 6 Safety Diploma in Gujranwala, OTHM Level 6 Safety Diploma in Sialkot, OTHM Level 6 Safety Diploma in Sargodha, OTHM Level 6 Safety Diploma in Gujrat, OTHM Level 6 Safety Diploma in Lahore, OTHM Level 6 Safety Diploma in Faisalabad, OTHM Level 6 Safety Diploma in Multan, OTHM Level 6 Safety Diploma in Mandi Bahauddin, OTHM Level 6 Safety Diploma in Bahawalpur, OTHM Level 6 Safety Diploma in Attock, OTHM Level 6 Safety Diploma in Chakwal, OTHM Level 6 Safety Diploma in Mirpur, OTHM Level 6 Safety Diploma in Bagh, OTHM Level 6 Safety Diploma in Rawala kot, OTHM Level 6 Safety Diploma in Kotli, OTHM Level 6 Safety Diploma in Karachi, OTHM Level 6 Safety Diploma in Hyderabad, OTHM Level 6 Safety Diploma in Mardan, OTHM Level 6 Safety Diploma in Peshawar, OTHM Level 6 Safety Diploma in Swat, OTHM Level 6 Safety Diploma in Rawat, OTHM Level 6 Safety Diploma in Sawabi, OTHM Level 6 Safety Diploma in Sahiwal, OTHM Level 6 Safety Diploma in Sakkar, OTHM Level 6 Safety Diploma in Haripur, OTHM Level 6 Safety Diploma in Pakistan O3315999937,

OTHM Level 6 Safety Diploma in Rawalpindi O3315999937 The OTHM Level 6 Diploma in Information Technology is designed to ensure that each learner is a confident, independent thinker with a detailed knowledge of Information Technology, and equipped with the skills to adapt rapidly to change at a junior or middle management level and aspiring into higher management within their organization or industry. The qualification is ideal for those who have started, or are planning to move into, a career in private or public sector business. The objective of the OTHM Level 6 Diploma in Health and Social Care Management qualification is to equip learners with the underpinning knowledge, understanding and skills required for a career in the health and social care sector at a managerial level. Health courses are always very useful for your career. Study Level 6 Diploma In health and social care management. The Diploma in health and social care management enables learners to demonstrate their skills by producing evidence from their work activities, to meet national occupational standards. Learners will acquire care management skills in the Health and Social Care sector. OTHM, online diploma in heath and social care management, health courses. The Level 6 qualifications in Occupational Health and Safety are developed to provide learners who have or are looking to develop into a senior role in an organization for managing health and safety policy and practice. Learners will gain the skills and knowledge to understand the legal and regulatory background to occupational health and safety policy, to be able to assess policies, as well as to recommend and implement policy changes. Learners will develop knowledge and skills relevant to putting policy into practice, utilising management systems, resources, risk and incident management, leadership, management and skills development. OVERVIEW The Level 6 qualifications in Occupational Health and Safety are developed to provide learners who have or are looking to develop into a senior role in an organization for managing health and safety policy and practice. Learners will gain the skills and knowledge to understand the legal and regulatory background to occupational health and safety policy, to be able to assess policies, as well as to recommend and implement policy changes. Learners will develop knowledge and skills relevant to putting policy into practice, utilizing management systems, resources, risk and incident management, leadership, management and skills development. ENTRY REQUIREMENT For entry onto the OTHM Level 6 Diploma in Occupational Health and Safety qualification, learners must possess: Relevant NQF/QCF/RQF certificate or diploma or equivalent recognized qualification that covers the following basic concepts within Occupational Health & Safety: Science and Technology Legal and regulatory systems Workplace safety and health Definitions of risk and risk management principles Principles and theories of safety and health management Occupational health and hygiene Occupational psychology Information technology, literacy and numeracy Qualifications that fulfill this requirement include: British Safety Council Level 3 Certificate in Occupational Safety and Health British Safety Council International Certificate in Occupational Safety and Health NCFE IOSH Level 3 Certificate in Safety and Health for Business NCRQ Level 6 Certificate in Applied Health and Safety NEBOSH National General Certificate in Occupational Health and Safety Mature learners (over 21) with practical experience at least 2 years Learner must be 18 years or older at the beginning of the course EQUIVALENCES OTHM qualifications at RQF Level 6 represent practical knowledge, skills, capabilities and competences that are assessed in academic terms as being equivalent level to Bachelor’s Degrees with Honours, Bachelor’s Degrees, Professional Graduate Certificate in Education (PGCE), Graduate Diplomas and Graduate Certificates COURSE CONTENTS The Level 6 Diploma in Occupational Health and Safety consists of 6 mandatory units for a combined total of 48 credits for the completed qualification. Health and Safety Management Principles and Policy (8 credits) Health and Safety Management Practice (10 credits) Risk and Incident Management (8 credits) Promoting a Positive Health and Safety Culture (6 credits) Main taining a Safe Workplace Environment (12 credits) Health and Safety Law, Regulation and Influence (8 credits) Development of the Health and Safety Practitioner (8 credits)

DIT Experience Based Course in Gujranwala, Gujrat international college of technical education course will be started soon in international college of technical education. the best courses of institute. The full diploma courses in international college of technical education. The Admission open and start the class, 03115193625. Diploma in Information Technology is a Diploma level Information Technology course. Information Technology is the acquisition, processing, storage and dissemination of vocal, pictorial, textual and numerical information by a microelectronics-based combination of computing and telecommunications. This program will introduce you to practical and theoretical knowledge in IT, and you will learn the fundamentals of programming, computer science, business systems, database design and digital media. Many prospective students want to know, what is a Diploma in IT? It is a program that enables students to develop practical skills and learn advanced concepts within the information technology field. Through the Diploma of Information Technology you develop knowledge and an understanding in any field of contemporary information technology. It helps prepare you for a range of careers including web designer, games programmer, business analyst, IT security expert or project manager. Degree in IT. Diploma in IT Engineering course trains students in areas such as- IT systems, database management, internet technology, data storage, data security, data mining, networking, software and hardware. After diploma in IT, you can try for B. Tech degree in IT or computer science. If you can obtain admission through lateral entry, then you can complete the course within three years. Post graduate diploma courses in streams related to IT will also help you to have a rewarding career. A degree takes four years and a diploma takes. This is because diplomas are highly focused and specialized than the more comprehensive degrees. They also place higher emphasis on practical and industry-specific skills than degrees which value theoretical academic knowledge and more holistic students. After completing their B-Tech in IT, students can seek jobs at almost all the major Multinational Corporations (MNCs) like IBM, Microsoft, Cisco, etc. Here, some of the job profiles served by candidates after attaining a degree in the IT industry have been highlighted: Computer Programmer. Web developer. Computer engineering, information technology and computer science are all disciplines within the same realm of study. However, each specialty focuses on specific aspects of the field, and careers within the three areas vary greatly. It is a well-known fact that Information Technology professionals are paid well, compared to other professionals. ... Many I.T. jobs provide great career advancement opportunities for a dedicated and hardworking I.T. professional. One of the best things about this field is that IT skills are not difficult to learn, as long as you're driven in your studies and fascinated by the power of computers. ... Even in colleges, IT skills are being utilized more than ever as increasing numbers of students opt to take courses online rather than on campus. Is the next big certification in the IT sector. Cloud Computing is one of the best IT courses in the IT Industry. If you look at the IT Industry closely you'd find that Cloud Computing is off late gaining a lot of popularity as far as the data management system is concerned within the organization. With the right qualifications, you'll be able to plan your career choices and utilise your skills. In many cases, a diploma is the best answer: it comes at a fraction of the cost, time and effort, and equips you with better practical skills and confidence for your new career. While a Bachelor Degree is a higher level qualification, a Diploma is very valuable to anyone wanting to get a better understanding of the industry, the skills needed in a career and the practices and responsibilities that are needed to be successful in whichever industry you're looking to pursue a career in. A Diploma qualification refers to the number of learning credits a student will study and aim to achieve in a course, but a Diploma can be awarded for any level, i.e. a Level 2 Diploma, Level 3 Diploma and so on. A graduate diploma (GradD, GDip, GrDip, GradDip) is generally a qualification taken after completion of a first degree, although the level of study varies in different countries from being at the same level as the final year of a bachelor's degree to being at a level between a master's degree and a doctorate. Diploma in Information Technology (DIT) Course in Rawalpindi, Islamabad, Lahore, Karachi, Gilgit, Skardu, Ghangche, taxila, Shigar, Astore, Diamer, Ghizer, Kharmang, Gultari, Rondo, Hunza Nagar, Gupi, Azad Jammu and Kashmir, Muzaffarabad, Mirpur, Bhimber, Kotli, Rawlakot, Bagh, Bahawalpur, Bhakkar, Chakwal, Chiniot, Dera Ghazi Khan, Faisalabad, Gujranwala, Gujrat, Hafizabad, Jhang, Jhelum, Kasur, Khanewal, Khushab, Layyah, Lodharan, Mandi-Bahuddin, Mianwali, Multan, Muzaffargarh, Nankana Sahib, Narowal, Okara, Pakpattan, Rahim Yar Khan, Rajanpur, Sahiwal, Sargodha, Sheikhupura, Sialkot, Toba tek Singh, Vehari, Attock, Taxila, Wah Cantt, Rawalpindi, Balochistan, Khyber-Pakhtunkhwa, Punjab, Sindh, Gilgit Baltistan, Turbat, Sibi, Chaman, Lasbela, Zhob, Gwadar, Nasiraba, Jaffarabad, Hub, Dera Murad Jamali, Dera Allah Yar, Khyber-Pakhtunkhwa, Peshawar, Mardan, Abbottabad, Mingor, Kohat, Bannu, Swabi, Dera Ismail Khan, Charsadda, Nowshera, Mansehra, Hyderabad, Sukkur, Larkana, Nawabshah, Nanak wara, Mirpur Khas, Jacobabad, Shikarpur, Khairpur, Pakistan. for further detail of all courses our the website www.icollegete.com www.courses.com.pk

Diploma in Information Technology (DIT) Course in Shams Abad, Kohata New session of course will be started soon in international college of technical education. Admission are open in international college of technical education for both boys and girls 923115193625. International college of technical offers Management courses, Technical courses, Safety courses and different type of courses and diplomas . All the courses and diplomas offered by international college of technical education is acceptable in whole world. Diploma in Information Technology is a Diploma level Information Technology course. Information Technology is the acquisition, processing, storage and dissemination of vocal, pictorial, textual and numerical information by a microelectronics-based combination of computing and telecommunications. This program will introduce you to practical and theoretical knowledge in IT, and you will learn the fundamentals of programming, computer science, business systems, database design and digital media. Many prospective students want to know, what is a Diploma in IT? It is a program that enables students to develop practical skills and learn advanced concepts within the information technology field. Through the Diploma of Information Technology you develop knowledge and an understanding in any field of contemporary information technology. It helps prepare you for a range of careers including web designer, games programmer, business analyst, IT security expert or project manager. Degree in IT. Diploma in IT Engineering course trains students in areas such as- IT systems, database management, internet technology, data storage, data security, data mining, networking, software and hardware. After diploma in IT, you can try for B. Tech degree in IT or computer science. If you can obtain admission through lateral entry, then you can complete the course within three years. Post graduate diploma courses in streams related to IT will also help you to have a rewarding career. A degree takes four years and a diploma takes. This is because diplomas are highly focused and specialized than the more comprehensive degrees. They also place higher emphasis on practical and industry-specific skills than degrees which value theoretical academic knowledge and more holistic students. After completing their B-Tech in IT, students can seek jobs at almost all the major Multinational Corporations (MNCs) like IBM, Microsoft, Cisco, etc. Here, some of the job profiles served by candidates after attaining a degree in the IT industry have been highlighted: Computer Programmer. Web developer. Computer engineering, information technology and computer science are all disciplines within the same realm of study. However, each specialty focuses on specific aspects of the field, and careers within the three areas vary greatly. It is a well-known fact that Information Technology professionals are paid well, compared to other professionals. ... Many I.T. jobs provide great career advancement opportunities for a dedicated and hardworking I.T. professional. One of the best things about this field is that IT skills are not difficult to learn, as long as you're driven in your studies and fascinated by the power of computers. ... Even in colleges, IT skills are being utilized more than ever as increasing numbers of students opt to take courses online rather than on campus. Is the next big certification in the IT sector. Cloud Computing is one of the best IT courses in the IT Industry. If you look at the IT Industry closely you'd find that Cloud Computing is off late gaining a lot of popularity as far as the data management system is concerned within the organization. With the right qualifications, you'll be able to plan your career choices and utilise your skills. In many cases, a diploma is the best answer: it comes at a fraction of the cost, time and effort, and equips you with better practical skills and confidence for your new career. While a Bachelor Degree is a higher level qualification, a Diploma is very valuable to anyone wanting to get a better understanding of the industry, the skills needed in a career and the practices and responsibilities that are needed to be successful in whichever industry you're looking to pursue a career in. A Diploma qualification refers to the number of learning credits a student will study and aim to achieve in a course, but a Diploma can be awarded for any level, i.e. a Level 2 Diploma, Level 3 Diploma and so on. A graduate diploma (GradD, GDip, GrDip, GradDip) is generally a qualification taken after completion of a first degree, although the level of study varies in different countries from being at the same level as the final year of a bachelor's degree to being at a level between a master's degree and a doctorate. Diploma in Information Technology (DIT) Course in Rawalpindi, Islamabad, Lahore, Karachi, Gilgit, Skardu, Ghangche, taxila, Shigar, Astore, Diamer, Ghizer, Kharmang, Gultari, Rondo, Hunza Nagar, Gupi, Azad Jammu and Kashmir, Muzaffarabad, Mirpur, Bhimber, Kotli, Rawlakot, Bagh, Bahawalpur, Bhakkar, Chakwal, Chiniot, Dera Ghazi Khan, Faisalabad, Gujranwala, Gujrat, Hafizabad, Jhang, Jhelum, Kasur, Khanewal, Khushab, Layyah, Lodharan, Mandi-Bahuddin, Mianwali, Multan, Muzaffargarh, Nankana Sahib, Narowal, Okara, Pakpattan, Rahim Yar Khan, Rajanpur, Sahiwal, Sargodha, Sheikhupura, Sialkot, Toba tek Singh, Vehari, Attock, Taxila, Wah Cantt, Rawalpindi, Balochistan, Khyber-Pakhtunkhwa, Punjab, Sindh, Gilgit Baltistan, Turbat, Sibi, Chaman, Lasbela, Zhob, Gwadar, Nasiraba, Jaffarabad, Hub, Dera Murad Jamali, Dera Allah Yar, Khyber-Pakhtunkhwa, Peshawar, Mardan, Abbottabad, Mingor, Kohat, Bannu, Swabi, Dera Ismail Khan, Charsadda, Nowshera, Mansehra, Hyderabad, Sukkur, Larkana, Nawabshah, Nanak wara, Mirpur Khas, Jacobabad, Shikarpur, Khairpur, Pakistan. for further detail of all courses our the website www.icollegete.com www.courses.com.pk

Diploma in information Technology (DIT) Course in Shams Abad, Kotli International college of technical education offers Management courses, Safety courses, Technical Courses, IT related courses. Language courses and different type of courses and diplomas which is acceptable in international as well as in domestic country. All the courses and diplomas offered by international college of technical education is acceptable in whole world. Admission are open in international college of technical education 923115193625. Diploma in Information Technology is a Diploma level Information Technology course. Information Technology is the acquisition, processing, storage and dissemination of vocal, pictorial, textual and numerical information by a microelectronics-based combination of computing and telecommunications. This program will introduce you to practical and theoretical knowledge in IT, and you will learn the fundamentals of programming, computer science, business systems, database design and digital media. Many prospective students want to know, what is a Diploma in IT? It is a program that enables students to develop practical skills and learn advanced concepts within the information technology field. Through the Diploma of Information Technology you develop knowledge and an understanding in any field of contemporary information technology. It helps prepare you for a range of careers including web designer, games programmer, business analyst, IT security expert or project manager. Degree in IT. Diploma in IT Engineering course trains students in areas such as- IT systems, database management, internet technology, data storage, data security, data mining, networking, software and hardware. After diploma in IT, you can try for B. Tech degree in IT or computer science. If you can obtain admission through lateral entry, then you can complete the course within three years. Post graduate diploma courses in streams related to IT will also help you to have a rewarding career. A degree takes four years and a diploma takes. This is because diplomas are highly focused and specialized than the more comprehensive degrees. They also place higher emphasis on practical and industry-specific skills than degrees which value theoretical academic knowledge and more holistic students. After completing their B-Tech in IT, students can seek jobs at almost all the major Multinational Corporations (MNCs) like IBM, Microsoft, Cisco, etc. Here, some of the job profiles served by candidates after attaining a degree in the IT industry have been highlighted: Computer Programmer. Web developer. Computer engineering, information technology and computer science are all disciplines within the same realm of study. However, each specialty focuses on specific aspects of the field, and careers within the three areas vary greatly. It is a well-known fact that Information Technology professionals are paid well, compared to other professionals. ... Many I.T. jobs provide great career advancement opportunities for a dedicated and hardworking I.T. professional. One of the best things about this field is that IT skills are not difficult to learn, as long as you're driven in your studies and fascinated by the power of computers. ... Even in colleges, IT skills are being utilized more than ever as increasing numbers of students opt to take courses online rather than on campus. Is the next big certification in the IT sector. Cloud Computing is one of the best IT courses in the IT Industry. If you look at the IT Industry closely you'd find that Cloud Computing is off late gaining a lot of popularity as far as the data management system is concerned within the organization. With the right qualifications, you'll be able to plan your career choices and utilise your skills. In many cases, a diploma is the best answer: it comes at a fraction of the cost, time and effort, and equips you with better practical skills and confidence for your new career. While a Bachelor Degree is a higher level qualification, a Diploma is very valuable to anyone wanting to get a better understanding of the industry, the skills needed in a career and the practices and responsibilities that are needed to be successful in whichever industry you're looking to pursue a career in. A Diploma qualification refers to the number of learning credits a student will study and aim to achieve in a course, but a Diploma can be awarded for any level, i.e. a Level 2 Diploma, Level 3 Diploma and so on. A graduate diploma (GradD, GDip, GrDip, GradDip) is generally a qualification taken after completion of a first degree, although the level of study varies in different countries from being at the same level as the final year of a bachelor's degree to being at a level between a master's degree and a doctorate. Diploma in Information Technology (DIT) Course in Rawalpindi, Islamabad, Lahore, Karachi, Gilgit, Skardu, Ghangche, taxila, Shigar, Astore, Diamer, Ghizer, Kharmang, Gultari, Rondo, Hunza Nagar, Gupi, Azad Jammu and Kashmir, Muzaffarabad, Mirpur, Bhimber, Kotli, Rawlakot, Bagh, Bahawalpur, Bhakkar, Chakwal, Chiniot, Dera Ghazi Khan, Faisalabad, Gujranwala, Gujrat, Hafizabad, Jhang, Jhelum, Kasur, Khanewal, Khushab, Layyah, Lodharan, Mandi-Bahuddin, Mianwali, Multan, Muzaffargarh, Nankana Sahib, Narowal, Okara, Pakpattan, Rahim Yar Khan, Rajanpur, Sahiwal, Sargodha, Sheikhupura, Sialkot, Toba tek Singh, Vehari, Attock, Taxila, Wah Cantt, Rawalpindi, Balochistan, Khyber-Pakhtunkhwa, Punjab, Sindh, Gilgit Baltistan, Turbat, Sibi, Chaman, Lasbela, Zhob, Gwadar, Nasiraba, Jaffarabad, Hub, Dera Murad Jamali, Dera Allah Yar, Khyber-Pakhtunkhwa, Peshawar, Mardan, Abbottabad, Mingor, Kohat, Bannu, Swabi, Dera Ismail Khan, Charsadda, Nowshera, Mansehra, Hyderabad, Sukkur, Larkana, Nawabshah, Nanak wara, Mirpur Khas, Jacobabad, Shikarpur, Khairpur, Pakistan. for further detail of all courses visit our website www.icollegete.com www.courses.com.pk

Diploma in information Technology (DIT) Course in Shams Abad, Sadiqabad International college of technical education offers Management courses, Safety courses, Technical Courses, IT related courses. Language courses and different type of courses and diplomas which is acceptable in international as well as in domestic country. All the courses and diplomas offered by international college of technical education is acceptable in whole world. Admission are open in international college of technical education 923115193625. Diploma in Information Technology is a Diploma level Information Technology course. Information Technology is the acquisition, processing, storage and dissemination of vocal, pictorial, textual and numerical information by a microelectronics-based combination of computing and telecommunications. This program will introduce you to practical and theoretical knowledge in IT, and you will learn the fundamentals of programming, computer science, business systems, database design and digital media. Many prospective students want to know, what is a Diploma in IT? It is a program that enables students to develop practical skills and learn advanced concepts within the information technology field. Through the Diploma of Information Technology you develop knowledge and an understanding in any field of contemporary information technology. It helps prepare you for a range of careers including web designer, games programmer, business analyst, IT security expert or project manager. Degree in IT. Diploma in IT Engineering course trains students in areas such as- IT systems, database management, internet technology, data storage, data security, data mining, networking, software and hardware. After diploma in IT, you can try for B. Tech degree in IT or computer science. If you can obtain admission through lateral entry, then you can complete the course within three years. Post graduate diploma courses in streams related to IT will also help you to have a rewarding career. A degree takes four years and a diploma takes. This is because diplomas are highly focused and specialized than the more comprehensive degrees. They also place higher emphasis on practical and industry-specific skills than degrees which value theoretical academic knowledge and more holistic students. After completing their B-Tech in IT, students can seek jobs at almost all the major Multinational Corporations (MNCs) like IBM, Microsoft, Cisco, etc. Here, some of the job profiles served by candidates after attaining a degree in the IT industry have been highlighted: Computer Programmer. Web developer. Computer engineering, information technology and computer science are all disciplines within the same realm of study. However, each specialty focuses on specific aspects of the field, and careers within the three areas vary greatly. It is a well-known fact that Information Technology professionals are paid well, compared to other professionals. ... Many I.T. jobs provide great career advancement opportunities for a dedicated and hardworking I.T. professional. One of the best things about this field is that IT skills are not difficult to learn, as long as you're driven in your studies and fascinated by the power of computers. ... Even in colleges, IT skills are being utilized more than ever as increasing numbers of students opt to take courses online rather than on campus. Is the next big certification in the IT sector. Cloud Computing is one of the best IT courses in the IT Industry. If you look at the IT Industry closely you'd find that Cloud Computing is off late gaining a lot of popularity as far as the data management system is concerned within the organization. With the right qualifications, you'll be able to plan your career choices and utilise your skills. In many cases, a diploma is the best answer: it comes at a fraction of the cost, time and effort, and equips you with better practical skills and confidence for your new career. While a Bachelor Degree is a higher level qualification, a Diploma is very valuable to anyone wanting to get a better understanding of the industry, the skills needed in a career and the practices and responsibilities that are needed to be successful in whichever industry you're looking to pursue a career in. A Diploma qualification refers to the number of learning credits a student will study and aim to achieve in a course, but a Diploma can be awarded for any level, i.e. a Level 2 Diploma, Level 3 Diploma and so on. A graduate diploma (GradD, GDip, GrDip, GradDip) is generally a qualification taken after completion of a first degree, although the level of study varies in different countries from being at the same level as the final year of a bachelor's degree to being at a level between a master's degree and a doctorate. Diploma in Information Technology (DIT) Course in Rawalpindi, Islamabad, Lahore, Karachi, Gilgit, Skardu, Ghangche, taxila, Shigar, Astore, Diamer, Ghizer, Kharmang, Gultari, Rondo, Hunza Nagar, Gupi, Azad Jammu and Kashmir, Muzaffarabad, Mirpur, Bhimber, Kotli, Rawlakot, Bagh, Bahawalpur, Bhakkar, Chakwal, Chiniot, Dera Ghazi Khan, Faisalabad, Gujranwala, Gujrat, Hafizabad, Jhang, Jhelum, Kasur, Khanewal, Khushab, Layyah, Lodharan, Mandi-Bahuddin, Mianwali, Multan, Muzaffargarh, Nankana Sahib, Narowal, Okara, Pakpattan, Rahim Yar Khan, Rajanpur, Sahiwal, Sargodha, Sheikhupura, Sialkot, Toba tek Singh, Vehari, Attock, Taxila, Wah Cantt, Rawalpindi, Balochistan, Khyber-Pakhtunkhwa, Punjab, Sindh, Gilgit Baltistan, Turbat, Sibi, Chaman, Lasbela, Zhob, Gwadar, Nasiraba, Jaffarabad, Hub, Dera Murad Jamali, Dera Allah Yar, Khyber-Pakhtunkhwa, Peshawar, Mardan, Abbottabad, Mingor, Kohat, Bannu, Swabi, Dera Ismail Khan, Charsadda, Nowshera, Mansehra, Hyderabad, Sukkur, Larkana, Nawabshah, Nanak wara, Mirpur Khas, Jacobabad, Shikarpur, Khairpur, Pakistan. for further detail of all courses visit our website www.icollegete.com www.courses.com.pk

Diploma in Information Technology (DIT) in Attock, Taxila International college of technical education All type of courses and diplomas offered by international college of technical education is acceptable in international countries as well as in domestic country. Admission open and started the class, 03115193625. This program will introduce you to practical and theoretical knowledge in IT, and you will learn the fundamentals of programming, computer science, business systems, database design and digital media. Many prospective students want to know, what is a Diploma in IT? It is a program that enables students to develop practical skills and learn advanced concepts within the information technology field. Through the Diploma of Information Technology you develop knowledge and an understanding in any field of contemporary information technology. It helps prepare you for a range of careers including web designer, games programmer, business analyst, IT security expert or project manager. Degree in IT. Diploma in IT Engineering course trains students in areas such as- IT systems, database management, internet technology, data storage, data security, data mining, networking, software and hardware. After diploma in IT, you can try for B. Tech degree in IT or computer science. If you can obtain admission through lateral entry, then you can complete the course within three years. Post graduate diploma courses in streams related to IT will also help you to have a rewarding career. A degree takes four years and a diploma takes two to three years. This is because diplomas are highly focused and specialized than the more comprehensive degrees. They also place higher emphasis on practical and industry-specific skills than degrees which value theoretical academic knowledge and more holistic students. After completing their B-Tech in IT, students can seek jobs at almost all the major Multinational Corporations (MNCs) like IBM, Microsoft, Cisco, etc. Here, some of the job profiles served by candidates after attaining a degree in the IT industry have been highlighted: Computer Programmer. Web developer. Computer engineering, information technology and computer science are all disciplines within the same realm of study. However, each specialty focuses on specific aspects of the field, and careers within the three areas vary greatly. It is a well-known fact that Information Technology professionals are paid well, compared to other professionals. ... Many I.T. jobs provide great career advancement opportunities for a dedicated and hardworking I.T. professional. One of the best things about this field is that IT skills are not difficult to learn, as long as you're driven in your studies and fascinated by the power of computers. ... Even in colleges, IT skills are being utilized more than ever as increasing numbers of students opt to take courses online rather than on campus. Is the next big certification in the IT sector. Cloud Computing is one of the best IT courses in the IT Industry. If you look at the IT Industry closely you'd find that Cloud Computing is off late gaining a lot of popularity as far as the data management system is concerned within the organization. With the right qualifications, you'll be able to plan your career choices and utilise your skills. In many cases, a diploma is the best answer: it comes at a fraction of the cost, time and effort, and equips you with better practical skills and confidence for your new career. While a Bachelor Degree is a higher level qualification, a Diploma is very valuable to anyone wanting to get a better understanding of the industry, the skills needed in a career and the practices and responsibilities that are needed to be successful in whichever industry you're looking to pursue a career in. A Diploma qualification refers to the number of learning credits a student will study and aim to achieve in a course, but a Diploma can be awarded for any level, i.e. a Level 2 Diploma, Level 3 Diploma and so on. A graduate diploma (GradD, GDip, GrDip, GradDip) is generally a qualification taken after completion of a first degree, although the level of study varies in different countries from being at the same level as the final year of a bachelor's degree to being at a level between a master's degree and a doctorate. Diploma in Information Technology (DIT) Course in Rawalpindi, Islamabad, Lahore, Karachi, Gilgit, Skardu, Ghangche, taxila, Shigar, Astore, Diamer, Ghizer, Kharmang, Gultari, Rondo, Hunza Nagar, Gupi, Azad Jammu and Kashmir, Muzaffarabad, Mirpur, Bhimber, Kotli, Rawlakot, Bagh, Bahawalpur, Bhakkar, Chakwal, Chiniot, Dera Ghazi Khan, Faisalabad, Gujranwala, Gujrat, Hafizabad, Jhang, Jhelum, Kasur, Khanewal, Khushab, Layyah, Lodharan, Mandi-Bahuddin, Mianwali, Multan, Muzaffargarh, Nankana Sahib, Narowal, Okara, Pakpattan, Rahim Yar Khan, Rajanpur, Sahiwal, Sargodha, Sheikhupura, Sialkot, Toba tek Singh, Vehari, Attock, Taxila, Wah Cantt, Rawalpindi, Balochistan, Khyber-Pakhtunkhwa, Punjab, Sindh, Gilgit Baltistan, Turbat, Sibi, Chaman, Lasbela, Zhob, Gwadar, Nasiraba, Jaffarabad, Hub, Dera Murad Jamali, Dera Allah Yar, Khyber-Pakhtunkhwa, Peshawar, Mardan, Abbottabad, Mingor, Kohat, Bannu, Swabi, Dera Ismail Khan, Charsadda, Nowshera, Mansehra, Hyderabad, Sukkur, Larkana, Nawabshah, Nanak wara, Mirpur Khas, Jacobabad, Shikarpur, Khairpur, Pakistan. for further detail of all courses our the website www.icollegete.com www.courses.com.pk

OSHA USA Safety Course in Kohat, Sohawa International college of technical education. offers Management courses, Safety courses, Technical courses, Language courses and different type of courses and diplomas. The Admission open will start the classes, 03115193625. The OSHA Outreach Training Program for General Industry provides training for workers and employers on the recognition, avoidance, abatement, and prevention of safety and health hazards in workplaces in general industry. Image result for OSHA USA Safety Course definition With the Occupational Safety and Health Act of 1970, Congress created the Occupational Safety and Health Administration (OSHA) to ensure safe and healthful working conditions for working men and women by setting and enforcing standards and by providing training, outreach, education and assistance. Most private sector employers and their employees in all 50 states are covered under OSHA. Unless you are certain that you are exempt from the act, you should assume that the standards apply to your business. OSHA inspections are generally unannounced. In fact, except in four exceptional circumstances when advance notice may be given, it is a criminal offense for any person to give unauthorized advance notice of an OSHA inspection. OSHA trainers must be authorized by OSHA and you can verify authorized trainers by contacting the local OSHA outreach training institute (OTI) organization. The proper OTI organization should be at the top of the card. Osha was a wonderful and professional company to work fpr. They very generous and flexible with hours and scheldule to make it convenient for both sides the worker and the employer. OSHA is only my certification for doing my job. ... Great place and people to work for and with. To become a safety officer, you need postsecondary education and specialized training. Though some jobs require a master's degree in occupational health or a related field, most safety officer jobs only require a bachelor's degree. You should study the basics of occupational health and safety, including OSHA standards. The short answer is no. OSHA has no specific standard or language that requires a company to hold toolbox talks- whether that is daily, weekly, monthly, or yearly. That being said, there is legal jargon in OSHA's standards that could be used as an argument to do so. Most employers want their safety managers to have a bachelor's degree. The degree can be in a number of different fields including occupational health and safety, public safety and engineering, or science and safety. Degrees in chemistry, biology, and general engineering can also be sufficient in many industries. Certified Safety Manager (CSM) Training Course. This Safety Manager Certification indicates to employers, potential employers, regulatory agencies and the courts that you have the knowledge, skills and abilities equivalent to a level of proficiency expected of a safety leader. The bachelor's degree program in safety management typically takes to complete and combines health science and business education to develop a thorough understanding of workplace safety hazards, methods of accident prevention and emergency responses. The initial training shall be for and refresher training shall be for eight hours annually. Employees who have received the initial training required by this paragraph shall be given a written certificate attesting that they have successfully completed the necessary training. OSHA standards are rules that describe the methods that employers must use to protect their employees from hazards. There are four groups of OSHA standards: General Industry, Construction, Maritime, and Agriculture. (General Industry is the set that applies to the largest number of workers and worksites). OSHA USA Safety Course in Rawalpindi, Islamabad, Lahore, Karachi, Gilgit, Skardu, Ghangche, taxila, Shigar, Astore, Diamer, Ghizer, Kharmang, Gultari, Rondo, Hunza Nagar, Gupi, Azad Jammu and Kashmir, Muzaffarabad, Mirpur, Bhimber, Kotli, Rawlakot, Bagh, Bahawalpur, Bhakkar, Chakwal, Chiniot, Dera Ghazi Khan, Faisalabad, Gujranwala, Gujrat, Hafizabad, Jhang, Jhelum, Kasur, Khanewal, Khushab, Layyah, Lodharan, Mandi-Bahuddin, Mianwali, Multan, Muzaffargarh, Nankana Sahib, Narowal, Okara, Pakpattan, Rahim Yar Khan, Rajanpur, Sahiwal, Sargodha, Sheikhupura, Sialkot, Toba tek Singh, Vehari, Attock, Taxila, Wah Cantt, Rawalpindi, Balochistan, Khyber-Pakhtunkhwa, Punjab, Sindh, Gilgit Baltistan, Turbat, Sibi, Chaman, Lasbela, Zhob, Gwadar, Nasiraba, Jaffarabad, Hub, Dera Murad Jamali, Dera Allah Yar, Khyber-Pakhtunkhwa, Peshawar, Mardan, Abbottabad, Mingor, Kohat, Bannu, Swabi, Dera Ismail Khan, Charsadda, Nowshera, Mansehra, Hyderabad, Sukkur, Larkana, Nawabshah, Nanak wara, Mirpur Khas, Jacobabad, Shikarpur, Khairpur, Pakistan. for further detail of all courses our the website www.icollegete.com www.courses.com.pk

OSHA USA Safety Course in Peshawar, Mardan international college of technical education course will be started soon in international college of technical education. the best courses of institute. The full diploma courses in international college of technical education. The Admission open and start the class, 03115193625. The OSHA Outreach Training Program for General Industry provides training for workers and employers on the recognition, avoidance, abatement, and prevention of safety and health hazards in workplaces in general industry. Image result for OSHA USA Safety Course definition With the Occupational Safety and Health Act of 1970, Congress created the Occupational Safety and Health Administration (OSHA) to ensure safe and healthful working conditions for working men and women by setting and enforcing standards and by providing training, outreach, education and assistance. Most private sector employers and their employees in all 50 states are covered under OSHA. Unless you are certain that you are exempt from the act, you should assume that the standards apply to your business. OSHA inspections are generally unannounced. In fact, except in four exceptional circumstances when advance notice may be given, it is a criminal offense for any person to give unauthorized advance notice of an OSHA inspection. OSHA trainers must be authorized by OSHA and you can verify authorized trainers by contacting the local OSHA outreach training institute (OTI) organization. The proper OTI organization should be at the top of the card. Osha was a wonderful and professional company to work fpr. They very generous and flexible with hours and scheldule to make it convenient for both sides the worker and the employer. OSHA is only my certification for doing my job. ... Great place and people to work for and with. To become a safety officer, you need postsecondary education and specialized training. Though some jobs require a master's degree in occupational health or a related field, most safety officer jobs only require a bachelor's degree. You should study the basics of occupational health and safety, including OSHA standards. The short answer is no. OSHA has no specific standard or language that requires a company to hold toolbox talks- whether that is daily, weekly, monthly, or yearly. That being said, there is legal jargon in OSHA's standards that could be used as an argument to do so. Most employers want their safety managers to have a bachelor's degree. The degree can be in a number of different fields including occupational health and safety, public safety and engineering, or science and safety. Degrees in chemistry, biology, and general engineering can also be sufficient in many industries. Certified Safety Manager (CSM) Training Course. This Safety Manager Certification indicates to employers, potential employers, regulatory agencies and the courts that you have the knowledge, skills and abilities equivalent to a level of proficiency expected of a safety leader. The bachelor's degree program in safety management typically takes to complete and combines health science and business education to develop a thorough understanding of workplace safety hazards, methods of accident prevention and emergency responses. The initial training shall be for and refresher training shall be for eight hours annually. Employees who have received the initial training required by this paragraph shall be given a written certificate attesting that they have successfully completed the necessary training. OSHA standards are rules that describe the methods that employers must use to protect their employees from hazards. There are four groups of OSHA standards: General Industry, Construction, Maritime, and Agriculture. (General Industry is the set that applies to the largest number of workers and worksites). OSHA USA Safety Course in Rawalpindi, Islamabad, Lahore, Karachi, Gilgit, Skardu, Ghangche, taxila, Shigar, Astore, Diamer, Ghizer, Kharmang, Gultari, Rondo, Hunza Nagar, Gupi, Azad Jammu and Kashmir, Muzaffarabad, Mirpur, Bhimber, Kotli, Rawlakot, Bagh, Bahawalpur, Bhakkar, Chakwal, Chiniot, Dera Ghazi Khan, Faisalabad, Gujranwala, Gujrat, Hafizabad, Jhang, Jhelum, Kasur, Khanewal, Khushab, Layyah, Lodharan, Mandi-Bahuddin, Mianwali, Multan, Muzaffargarh, Nankana Sahib, Narowal, Okara, Pakpattan, Rahim Yar Khan, Rajanpur, Sahiwal, Sargodha, Sheikhupura, Sialkot, Toba tek Singh, Vehari, Attock, Taxila, Wah Cantt, Rawalpindi, Balochistan, Khyber-Pakhtunkhwa, Punjab, Sindh, Gilgit Baltistan, Turbat, Sibi, Chaman, Lasbela, Zhob, Gwadar, Nasiraba, Jaffarabad, Hub, Dera Murad Jamali, Dera Allah Yar, Khyber-Pakhtunkhwa, Peshawar, Mardan, Abbottabad, Mingor, Kohat, Bannu, Swabi, Dera Ismail Khan, Charsadda, Nowshera, Mansehra, Hyderabad, Sukkur, Larkana, Nawabshah, Nanak wara, Mirpur Khas, Jacobabad, Shikarpur, Khairpur, Pakistan. for further detail of all courses our the website www.icollegete.com www.courses.com.pk

PG DIT Course in Karachi, Lahore Admission are open in international college of technical education for the course of and also for other courses and diplomas offered by international college of technical education 923115193625. lowest fee institute which offers national and international courses and diplomas. all the courses and diplomas offered by international college of technical education is acceptable in whole world. Post Graduate Diploma in Information Technology (PGDIT) is a postgraduate diploma level course. The program has been designed to produce IT postgraduates who are able to think critically and have several high-level skills in the IT field that can be applied in a wide range of situations. Postgraduate diplomas and postgraduate certificates are qualifications at the same level of study as Masters degrees, but they're shorter and you don't have to write a dissertation. ... The difference between them is that a PGDip takes longer and is worth more credits than a PGCert. A postgraduate diploma (PgD, PgDip, PGDip, PG Dip., PGD, Dipl. PG, PDE) is a postgraduate qualification awarded after a university degree, which supplements the original degree and awards them with a graduate diploma. The relative importance of a diploma, when compared to a degree course is less. Degree programs give more in-depth knowledge and potentially start you at a higher level. Diploma programs provide education within your given field and get you into the work force sooner. At postgraduate level, courses range from graduate certificates and graduate diplomas to masters and doctoral degrees. ... If you're looking to enter postgraduate study without an undergraduate degree, your options will generally be limited to coursework programs. Doctorate degree is the highest level of academic degree which can be accomplished after the master's degree. ... The degree courses are mostly expensive as compared to the diploma courses and take more time to complete than diploma courses. Hope by this article you get to the difference between diploma and degree. The degree is a four-year course, while the diploma is a two-year course. Admissions to a degree program are made yearly, while to a diploma course it can be done either yearly or half-yearly. ... Degree courses are more expensive than diploma ones. It can be a little difficult but it's not impossible to complete and if you are looking to be a room leader then you need to complete it. You can have a browse through the Diploma forum to get an idea of the types of questions that may be asked. A doctorate degree is the highest level of education or degree for the students. It requires a considerable amount of time and money investment. The common title for Doctorate Degree is Doctor of Philosophy abbreviated as PhD. UG stands for Undergraduate. UG course is generally three or four years program that is done after completing. On the other hand, PG stands for Postgraduate which is generally for one or two years. To be eligible for postgraduate program, candidates must have obtained Bachelor degree. PGDM, or 'Post Graduate Diploma In Management', is an elite qualification for professionals. ... The study of the PGDM course is actually a comparatively new postgraduate qualification. PGDM programs have promptly rooted themselves as the mark of serious business professionals among all around the world. PG DIT Course in Rawalpindi, Islamabad, Lahore, Karachi, Gilgit, Skardu, Ghangche, taxila, Shigar, Astore, Diamer, Ghizer, Kharmang, Gultari, Rondo, Hunza Nagar, Gupi, Azad Jammu and Kashmir, Muzaffarabad, Mirpur, Bhimber, Kotli, Rawlakot, Bagh, Bahawalpur, Bhakkar, Chakwal, Chiniot, Dera Ghazi Khan, Faisalabad, Gujranwala, Gujrat, Hafizabad, Jhang, Jhelum, Kasur, Khanewal, Khushab, Layyah, Lodharan, Mandi-Bahuddin, Mianwali, Multan, Muzaffargarh, Nankana Sahib, Narowal, Okara, Pakpattan, Rahim Yar Khan, Rajanpur, Sahiwal, Sargodha, Sheikhupura, Sialkot, Toba tek Singh, Vehari, Attock, Taxila, Wah Cantt, Rawalpindi, Balochistan, Khyber-Pakhtunkhwa, Punjab, Sindh, Gilgit Baltistan, Turbat, Sibi, Chaman, Lasbela, Zhob, Gwadar, Nasiraba, Jaffarabad, Hub, Dera Murad Jamali, Dera Allah Yar, Khyber-Pakhtunkhwa, Peshawar, Mardan, Abbottabad, Mingor, Kohat, Bannu, Swabi, Dera Ismail Khan, Charsadda, Nowshera, Mansehra, Hyderabad, Sukkur, Larkana, Nawabshah, Nanak wara, Mirpur Khas, Jacobabad, Shikarpur, Khairpur, Pakistan. for further detail of all courses our the website www.icollegete.com www.courses.com.pk

PG DIT Course in Muzaffarabad, Bhag Admission are open in international college of technical education for the course of and also for other courses and diplomas offered by international college of technical education 923115193625. lowest fee institute which offers national and international courses and diplomas. all the courses and diplomas offered by international college of technical education is acceptable in whole world. Post Graduate Diploma in Information Technology (PGDIT) is a postgraduate diploma level course. The program has been designed to produce IT postgraduates who are able to think critically and have several high-level skills in the IT field that can be applied in a wide range of situations. Postgraduate diplomas and postgraduate certificates are qualifications at the same level of study as Masters degrees, but they're shorter and you don't have to write a dissertation. ... The difference between them is that a PGDip takes longer and is worth more credits than a PGCert. A postgraduate diploma (PgD, PgDip, PGDip, PG Dip., PGD, Dipl. PG, PDE) is a postgraduate qualification awarded after a university degree, which supplements the original degree and awards them with a graduate diploma. The relative importance of a diploma, when compared to a degree course is less. Degree programs give more in-depth knowledge and potentially start you at a higher level. Diploma programs provide education within your given field and get you into the work force sooner. At postgraduate level, courses range from graduate certificates and graduate diplomas to masters and doctoral degrees. ... If you're looking to enter postgraduate study without an undergraduate degree, your options will generally be limited to coursework programs. Doctorate degree is the highest level of academic degree which can be accomplished after the master's degree. ... The degree courses are mostly expensive as compared to the diploma courses and take more time to complete than diploma courses. Hope by this article you get to the difference between diploma and degree. The degree is a four-year course, while the diploma is a two-year course. Admissions to a degree program are made yearly, while to a diploma course it can be done either yearly or half-yearly. ... Degree courses are more expensive than diploma ones. It can be a little difficult but it's not impossible to complete and if you are looking to be a room leader then you need to complete it. You can have a browse through the Diploma forum to get an idea of the types of questions that may be asked. A doctorate degree is the highest level of education or degree for the students. It requires a considerable amount of time and money investment. The common title for Doctorate Degree is Doctor of Philosophy abbreviated as PhD. UG stands for Undergraduate. UG course is generally three or four years program that is done after completing. On the other hand, PG stands for Postgraduate which is generally for one or two years. To be eligible for postgraduate program, candidates must have obtained Bachelor degree. PGDM, or 'Post Graduate Diploma In Management', is an elite qualification for professionals. ... The study of the PGDM course is actually a comparatively new postgraduate qualification. PGDM programs have promptly rooted themselves as the mark of serious business professionals among all around the world. PG DIT Course in Rawalpindi, Islamabad, Lahore, Karachi, Gilgit, Skardu, Ghangche, taxila, Shigar, Astore, Diamer, Ghizer, Kharmang, Gultari, Rondo, Hunza Nagar, Gupi, Azad Jammu and Kashmir, Muzaffarabad, Mirpur, Bhimber, Kotli, Rawlakot, Bagh, Bahawalpur, Bhakkar, Chakwal, Chiniot, Dera Ghazi Khan, Faisalabad, Gujranwala, Gujrat, Hafizabad, Jhang, Jhelum, Kasur, Khanewal, Khushab, Layyah, Lodharan, Mandi-Bahuddin, Mianwali, Multan, Muzaffargarh, Nankana Sahib, Narowal, Okara, Pakpattan, Rahim Yar Khan, Rajanpur, Sahiwal, Sargodha, Sheikhupura, Sialkot, Toba tek Singh, Vehari, Attock, Taxila, Wah Cantt, Rawalpindi, Balochistan, Khyber-Pakhtunkhwa, Punjab, Sindh, Gilgit Baltistan, Turbat, Sibi, Chaman, Lasbela, Zhob, Gwadar, Nasiraba, Jaffarabad, Hub, Dera Murad Jamali, Dera Allah Yar, Khyber-Pakhtunkhwa, Peshawar, Mardan, Abbottabad, Mingor, Kohat, Bannu, Swabi, Dera Ismail Khan, Charsadda, Nowshera, Mansehra, Hyderabad, Sukkur, Larkana, Nawabshah, Nanak wara, Mirpur Khas, Jacobabad, Shikarpur, Khairpur, Pakistan. for further detail of all courses our the website www.icollegete.com www.courses.com.pk

Nebosh IG Course In Shams Abad, Sialkot 03354176949, International college of technical education All type of courses and diplomas offered by international college of technical education is acceptable in international countries as well as in domestic country. Admission open the classes will be starting Soon, 03115193625. The NEBOSH International General Certificate course focuses on how health and safety management can be applied in the workplace. The course has a high pass rate and holders can apply for membership of the Institution of Occupational Safety and Health (IOSH) or progress to the International Diploma. Individuals. The NEBOSH International General Certificate will give you invaluable knowledge and skills AND a globally respected qualification that supports your current role and your long-term career. The qualification is: Relevant to every workplace. To do this high level course, candidates has to possess NEBOSH certificate or any equivalent certification along with adequate knowledge and experience of health and safety. Since NEBOSH Diploma can be equivalent to degree qualification, students must allocate significant study time to complete this course. The NEBOSH General Certificate is widely seen as the first step towards a career in health and safety. As well as providing a platform for higher level qualifications, such as the NEBOSH Diploma, the NEBOSH General Certificate also enables you to apply for membership of all types of professional bodies. While the NEBOSH exam can be challenging, it certainly isn't impossible to pass. Putting the effort in with self-study while knowing how long to spend on each question and recognizing how much information you need to put down will stand you in good stead. The two are different Health and Safety certificate awarding bodies, and have their specific courses. Also, OSHA is also a Health and safety regulatory body in the United States. ... But as an international Health and Safety professional (Living or working outside the United States) NEBOSH is more preferable for you. Considered the “Gold Standard” of health and safety qualifications, the NEBOSH National Diploma is a requirement in around half of all health and safety job adverts. Diploma holders are estimated to earn 16% more than those who do not have the qualification. To become a safety officer, you need postsecondary education and specialized training. Though some jobs require a master's degree in occupational health or a related field, most safety officer jobs only require a bachelor's degree. You should study the basics of occupational health and safety, including OSHA standards. So despite being quite an expensive and time-consuming course, achieving a NEBOSH General Certificate is more often than not definitely worth the effort, time and money for those who are serious about a career in a health and safety role. The NEBOSH National General Certificate in Occupational Health and Safety can be the gateway to a variety of not just jobs, but careers. ... Job titles to which NEBOSH certificate holders can aspire include: Health and Safety Advisor. Health and Safety Officer. If you have received a fail or referral in a NEBOSH General Certificate unit exam, you can either: Resit the exam, or. Appeal to NEBOSH about your result. OSHE Consultants, an international provider of Safety and Health Courses, is pleased to announce that they have become the only accredited USA provider of the NEBOSH International Diploma in Occupational Safety & Health and the NEBOSH Oil & Gas certificate. NEBOSH training courses take considerably longer than IOSH and, as a result, have a higher-level qualification achieved at the end. NEBOSH Diplomas are a Level 6 qualification and degree-level. They are more advanced than IOSH courses and NEBOSH Certificates are requires longer study. The IGC is NEBOSH's most popular qualification worldwide and is recognized as the must-have qualification amongst employers in Germany. We are pleased to now offer NEBOSH courses Live Online. Students can join remotely and learn 'live' with a tutor just as they would in a classroom. Learn more about Live Online. In the UK, the NEBOSH Diploma is equivalent to SCQF Level 10, which is comparable to NQF/QCF Level 6 in England, Wales and Northern Ireland. ... The NEBOSH Diploma is recognized in many countries by their Health and Safety body as comparable to a degree level. NEBOSH IG Course in Rawalpindi, Islamabad, Lahore, Karachi, Gilgit, Skardu, Ghangche, taxila, Shigar, Astore, Diamer, Ghizer, Kharmang, Gultari, Rondo, Hunza Nagar, Gupi, Azad Jammu and Kashmir, Muzaffarabad, Mirpur, Bhimber, Kotli, Rawlakot, Bagh, Bahawalpur, Bhakkar, Chakwal, Chiniot, Dera Ghazi Khan, Faisalabad, Gujranwala, Gujrat, Hafizabad, Jhang, Jhelum, Kasur, Khanewal, Khushab, Layyah, Lodharan, Mandi-Bahuddin, Mianwali, Multan, Muzaffargarh, Nankana Sahib, Narowal, Okara, Pakpattan, Rahim Yar Khan, Rajanpur, Sahiwal, Sargodha, Sheikhupura, Sialkot, Toba tek Singh, Vehari, Attock, Taxila, Wah Cantt, Rawalpindi, Balochistan, Khyber-Pakhtunkhwa, Punjab, Sindh, Gilgit Baltistan, Turbat, Sibi, Chaman, Lasbela, Zhob, Gwadar, Nasiraba, Jaffarabad, Hub, Dera Murad Jamali, Dera Allah Yar, Khyber-Pakhtunkhwa, Peshawar, Mardan, Abbottabad, Mingor, Kohat, Bannu, Swabi, Dera Ismail Khan, Charsadda, Nowshera, Mansehra, Hyderabad, Sukkur, Larkana, Nawabshah, Nanak wara, Mirpur Khas, Jacobabad, Shikarpur, Khairpur, Pakistan. for further detail of all courses visit our website www.icollegete.com www.courses.com.pk

Diploma in IT ( DIT ) Course in Mardan Charsadda Kohat,Diploma in IT ( DIT ) Course in Rawalpindi Islamabad Ghori Town Pakistan,international college of technical education in rawalpindi islamabad pakistan,best IT DIT institute in rawalpindi islamabad pakistan,professional DIT Diploma in information technology course in rawalpindi islamabad pakistan,lowest fee DIT course in rawalpindi islamabad pakistan,admission open for boys and girls new session start on 5 October 2020 certification acceptable in government job and worldwide International College of Technical Education. Head Office : Office # 27, Second Floor, Maryam Shadi Hall Plaza (Airies Plaza), Shamsabad, Murree Road, Rawalpindi, Pakistan 0311-5193625, 0092-335-4176949 Diploma in Information Technology is a Diploma level Information Technology course. Information Technology is the acquisition, processing, storage and dissemination of vocal, pictorial, textual and numerical information by a microelectronics-based combination of computing and telecommunications.This diploma course may also be offered by some certain institutes on a part-time basis and its syllabus is divided into three semesters.The ICTE is to provide knowledge and Technical competence in Informatics and the field of Information Technology (IT) or to the student who wants to pursue further studies in computing fields.Directors have decided not to recruit / enrol any new students in the Diploma of Information Technology course, effective 20th September 2019. This decision does not affect currently enrolled students, since units within their course will continue to be available for them to study and graduate, and the Diploma will be in a “teach out” study mode over the next two years.The Diploma of Information Technology (DIT) ) lays foundations in computing, computer hardware and architecture, web and multimedia technologies, operating systems and database technologies. It is delivered as a hands-on practical experience and learning course with different computer technologies, in both individual and collaborative modes. It also provides appropriate entry points for employment in the IT industry or entry into the second year of a relevant Bachelor course.This degree is primarily focused on subjects such as software, databases, and networking. In general, computer science degrees tend to focus on the mathematical and theoretical foundations of computing rather than emphasizing specific technologies. The degree is a Bachelor of Science degree with institutions conferring degrees in the fields of information technology and related fields. This degree is awarded for completing a program of study in the field of software development, software testing, software engineering, web design, databases, programming, computer networking and computer systems.Graduates with an information technology background are able to perform technology tasks relating to the processing, storing, and communication of information between computers, mobile phones, and other electronic devices. Information technology as a field emphasizes the secure management of large amounts of variable information and its accessibility via a wide variety of systems both local and worldwide DIT Course Contents: 1:Introduction to information technology 2:Hardware Software storage devices 3:Fundamentals of Network 3:Introduction to database 5:Ms Access 6:Graphic Designing 7:Operating System 8:Office Automation 9:Computer Language C/C++ 10:Project www.icollegete.com www.courses.com.pk Diploma in IT ( DIT ) Course in Mardan Charsadda Kohat.

Diploma in Information Technology (DIT) in Attock, Sialkot New session of course will be started soon in international college of technical education. Admission are open in international college of technical education for both boys and girls 923115193625. International college of technical offers Management courses, Technical courses, Safety courses and different type of courses and diplomas . All the courses and diplomas offered by international college of technical education is acceptable in whole world. Diploma in Information Technology is a Diploma level Information Technology course. Information Technology is the acquisition, processing, storage and dissemination of vocal, pictorial, textual and numerical information by a microelectronics-based combination of computing and telecommunications. The DIT is the camera department crew member who works in collaboration with the cinematographer on workflow, systemization, camera settings, signal integrity and image manipulation to achieve the highest image quality and creative goals of cinematography in the digital realm. Certification in Information Technology - CIT is the renowned training and most effective program. ... The Program covers the Introduction of Information Technology, where basics and computer hardware and Networking program are being covered. An IT college will give you practical skills in designing software, websites or computer systems that meet an organization's needs for data, research or communication. Computer science degrees focus on problem solving across all areas of computing. Dynamic interpersonal therapy (DIT) can help people with emotional and relationship problems. When a person can deal with relationship problems more effectively, their psychological symptoms often improve. DIT is a time-limited psychodynamic therapy. Computing and Information Technology. CIT. Computer Information Technology. CIT. Center for Information Technology (US National Institutes of Health). The B.S. degree in Computer Information Technology (CIT) is designed for students who are interested in a professional career that involves solving the informational technology infrastructure needs of companies and organizations. Students can land most information technology jobs with a bachelor's degree in IT, computer science or other tech-related fields. The Bachelor of Science in information technology is one common degree pathway; B.S. The Latin root loqu and its variant locut mean “speak.” These roots are the word origins of a fair number of English vocabulary words, including eloquent, loquacious, elocution, and circumlocution. -dict-, root. -dict- comes from Latin, where it has the meaning "say, speak. '' This meaning is found in such words as: benediction, contradict, dictate, dictator, diction, dictionary, dictum, edict, predict. It comes from a Latin term that means “foretelling.” Prediction is the noun form of the verb predict, which is formed from the prefix pre-, meaning “before,” and the root dic-, meaning “to say.” Interpersonal therapy (IPT) is a method of treating depression. IPT is a form of psychotherapy that focuses on you and your relationships with other people. It's based on the idea that personal relationships are at the center of psychological problems. Depression isn't always caused by an event or a relationship. ?Interpersonal psychotherapy (IPT) is a form of psychotherapy that focuses on relieving symptoms by improving interpersonal functioning. A central idea in IPT is that psychological symptoms can be understood as a response to current difficulties in everyday relationships with other people. Psychodynamic therapy focuses on unconscious processes as they are manifested in the client's present behavior. The goals of psychodynamic therapy are client self-awareness and understanding of the influence of the past on present behavior. cit. is an abbreviation of the Latin phrase opere citato, meaning "in the work cited." It is used in an endnote or footnote to refer the reader to a previously cited work, standing in for repetition of the full title of the work. Diploma in Information Technology (DIT) Course in Rawalpindi, Islamabad, Lahore, Karachi, Gilgit, Skardu, Ghangche, taxila, Shigar, Astore, Diamer, Ghizer, Kharmang, Gultari, Rondo, Hunza Nagar, Gupi, Azad Jammu and Kashmir, Muzaffarabad, Mirpur, Bhimber, Kotli, Rawlakot, Bagh, Bahawalpur, Bhakkar, Chakwal, Chiniot, Dera Ghazi Khan, Faisalabad, Gujranwala, Gujrat, Hafizabad, Jhang, Jhelum, Kasur, Khanewal, Khushab, Layyah, Lodharan, Mandi-Bahuddin, Mianwali, Multan, Muzaffargarh, Nankana Sahib, Narowal, Okara, Pakpattan, Rahim Yar Khan, Rajanpur, Sahiwal, Sargodha, Sheikhupura, Sialkot, Toba tek Singh, Vehari, Attock, Taxila, Wah Cantt, Rawalpindi, Balochistan, Khyber-Pakhtunkhwa, Punjab, Sindh, Gilgit Baltistan, Turbat, Sibi, Chaman, Lasbela, Zhob, Gwadar, Nasiraba, Jaffarabad, Hub, Dera Murad Jamali, Dera Allah Yar, Khyber-Pakhtunkhwa, Peshawar, Mardan, Abbottabad, Mingor, Kohat, Bannu, Swabi, Dera Ismail Khan, Charsadda, Nowshera, Mansehra, Hyderabad, Sukkur, Larkana, Nawabshah, Nanak wara, Mirpur Khas, Jacobabad, Shikarpur, Khairpur, Pakistan. for further detail of all courses our the website www.icollegete.com www.courses.com.pk

NEBOSH IG Course in Shams Abad, Multan 03354176949, international college of technical education course will be started soon in international college of technical education. the best courses of institute. The full diploma courses in international college of technical education. The Admission open and start the class, 03115193625. The NEBOSH International General Certificate course focuses on how health and safety management can be applied in the workplace. The course has a high pass rate and holders can apply for membership of the Institution of Occupational Safety and Health (IOSH) or progress to the International Diploma. Individuals. The NEBOSH International General Certificate will give you invaluable knowledge and skills AND a globally respected qualification that supports your current role and your long-term career. The qualification is: Relevant to every workplace. While the NEBOSH exam can be challenging, it certainly isn't impossible to pass. Putting the effort in with self-study while knowing how long to spend on each question and recognizing how much information you need to put down will stand you in good stead. The NEBOSH Diploma is the highest-level qualification NEBOSH offers. It is a degree level qualification, meeting the academic requirement for Graduate IOSH membership and is intended for those pursuing a career as professional health and safety advisors. NEBOSH IGC online course is now available for learners to pursue through blended learning model. NEBOSH online courses come with webinars conducted by our expert trainers. To become a safety officer, you need postsecondary education and specialized training. Though some jobs require a master's degree in occupational health or a related field, most safety officer jobs only require a bachelor's degree. You should study the basics of occupational health and safety, including OSHA standards. NEBOSH training courses take considerably longer than IOSH and, as a result, have a higher-level qualification achieved at the end. NEBOSH Diplomas are a Level 6 qualification and degree-level. They are more advanced than IOSH courses and NEBOSH Certificates are requires longer study. Both serving and former members qualify for grants towards any NEBOSH Certificate or Diploma level course. The exact level of monetary assistance will vary depending on your stint in the military, but contributions could amount to as much as 80% of the total value. Once you have completed your NEBOSH Diploma you can apply for Graduate membership of IOSH. You are now starting your journey to Chartered status and CPD completion is mandatory, so by starting early you already have a record of your learning so far. There are four categories of NEBOSH qualification: award, certificate, diploma and master's degree. In 2019 NEBOSH launched its first course. NEBOSH receives regular requests from employers, recruitment agencies, Higher Education institutions, and other similar bodies to verify that an individual actually holds a NEBOSH qualification. If you have a copy of the qualification parchment, we can verify within 5 working days whether it is genuine or not. NEBOSH (The National Examination Body in Occupational Safety and Health) is a leading global brand in health, safety and environmental qualifications. ... Both versions of the NEBOSH General Certificate are recognized around the world. Ideal for those looking to start a career in health and safety, most job descriptions for health and safety roles require IOSH Membership and the NEBOSH National General Certificate qualification, and as mentioned above, the NEBOSH Certificate can help you gain IOSH membership. NEBOSH has introduced open book exams for both the NEBOSH National and International General Certificates – units NG1, IG1, NGC1 and IGC1. This replaces in-person closed book exams and enables learners to sit their NEBOSH assessment in their own home or another safe and suitable location. NEBOSH IG Course in Rawalpindi, Islamabad, Lahore, Karachi, Gilgit, Skardu, Ghangche, taxila, Shigar, Astore, Diamer, Ghizer, Kharmang, Gultari, Rondo, Hunza Nagar, Gupi, Azad Jammu and Kashmir, Muzaffarabad, Mirpur, Bhimber, Kotli, Rawlakot, Bagh, Bahawalpur, Bhakkar, Chakwal, Chiniot, Dera Ghazi Khan, Faisalabad, Gujranwala, Gujrat, Hafizabad, Jhang, Jhelum, Kasur, Khanewal, Khushab, Layyah, Lodharan, Mandi-Bahuddin, Mianwali, Multan, Muzaffargarh, Nankana Sahib, Narowal, Okara, Pakpattan, Rahim Yar Khan, Rajanpur, Sahiwal, Sargodha, Sheikhupura, Sialkot, Toba tek Singh, Vehari, Attock, Taxila, Wah Cantt, Rawalpindi, Balochistan, Khyber-Pakhtunkhwa, Punjab, Sindh, Gilgit Baltistan, Turbat, Sibi, Chaman, Lasbela, Zhob, Gwadar, Nasiraba, Jaffarabad, Hub, Dera Murad Jamali, Dera Allah Yar, Khyber-Pakhtunkhwa, Peshawar, Mardan, Abbottabad, Mingor, Kohat, Bannu, Swabi, Dera Ismail Khan, Charsadda, Nowshera, Mansehra, Hyderabad, Sukkur, Larkana, Nawabshah, Nanak wara, Mirpur Khas, Jacobabad, Shikarpur, Khairpur, Pakistan. for further detail of all courses visit our website www.icollegete.com www.courses.com.pk

Professional Chef and Cooking Diploma Course in Rawalpindi Attock Chakwal,Chef and Cooking International Diploma Course in Rawalpindi Pakistan,international college of technical education offer practical training Chef and Cooking diploma course in rawalpindi islamabad punjab pakistan,best training institute in rawalpindi pakistan,professional Chef number one institute in rawalpindi sialkot faisalabad lahore,admission open for boys and girls diploma acceptable in government job and world wide Office # 27, Second Floor, Maryam Shadi Hall Plaza (Airies Plaza), Shamsabad, Murree Road,Rawalpindi, Pakistan 0311-5193625, 0092-335-4176949,A culinary chef is someone who is in the profession of preparing, cooking and presenting food. A chef can also be very innovative with food, creating new dishes, deciding what the specials of the day will be, and putting together an exciting menu.Compared to a bachelor's degree, a diploma in culinary arts is the quickest way to train for a job in the food business. A diploma generally takes one to two years to complete, however this depends on which school and program you choose.Being a chef can be a good career. You won't be rich, but you can be comfortable. You won't always be home by 5 but a smart chef can still have a healthy life work balance And don't be a private chef, hotel chef, catering chef, cruise ship chef, golf course chef, food stylist, these are not real chef jobs.Successful chefs need to be masters of basic arithmetic, including adding, subtracting, multiplying and dividing. They also need to be comfortable with both fractions and decimals. Most culinary programs require students to study math.This course, which may be offered over several terms, teaches students essential chef skills. Students learn knife skills, cooking techniques for different ingredients and 'mother' recipes for stocks, sauces and other culinary building blocks. Kitchen skills courses are usually taken throughout a chef-training program and usually progress from basic to specialized skills.There is a strong demand for well-trained chefs and excellent promotion prospects for hard-working professionals with commitment and flair. Our Chef Cookery Courses will equip you with the practical skills and knowledge to work across a variety of sectors in the catering and food service industries, from event catering to fine dining restaurants.Level 2 will teach you about key food preparation and cookery skills including a broad range of cookery processes, dishes, sauces and baking.Level 3 will help you develop and refine your essential skills, building on your culinary foundations to take your cookery to a higher level with more complex techniques and dishes. On completion, you will be able to apply for degree-level courses.International College also runs the prestigious chef apprenticeship with the Royal Academy of Culinary Arts. On-the-job training takes place at some of the finest restaurants in the Birmingham area. Please see the Apprenticeships tab for more information.Rawalpindi, Islamabad, Lahore, Karachi, Gilgit, Skardu, Ghangche, taxila, Shigar, Astore, Diamer, Ghizer, Kharmang, Gultari, Rondo, Hunza Nagar, Gupi, Azad Jammu and Kashmir, Muzaffarabad, Mirpur, Bhimber, Kotli, Rawlakot, Bagh, Bahawalpur, Bhakkar, Chakwal, Chiniot, Dera Ghazi Khan, Faisalabad, Gujranwala, Gujrat, Hafizabad, Jhang, Jhelum, Kasur, Khanewal, Khushab, Layyah, Lodharan, Mandi-Bahuddin, Mianwali, Multan, Muzaffargarh, Nankana Sahib, Narowal, Okara, Pakpattan, Rahim Yar Khan, Rajanpur, Sahiwal, Sargodha, Sheikhupura, Sialkot, Toba tek Singh, Vehari, Attock, Taxila, Wah Cantt, Rawalpindi, Balochistan, Khyber-Pakhtunkhwa, Punjab, Sindh, Gilgit Baltistan, Turbat, Sibi, Chaman, Lasbela, Zhob, Gwadar, Nasiraba, Jaffarabad, Hub, Dera Murad Jamali, Dera Allah Yar, Khyber-Pakhtunkhwa, Peshawar, Mardan, Abbottabad, Mingor, Kohat, Bannu, Swabi, Dera Ismail Khan, Charsadda, Nowshera, Mansehra, Hyderabad, Sukkur, Larkana, Nawabshah, Nanak wara, Mirpur Khas, Jacobabad, Shikarpur, Khairpur, Pakistan.Experienced Based Diploma in Ac Technician ,Electronic , Mechanical , Plumbing , Auto Electrician , Efi Auto Electrician , Civil Surveyor , Quantity surveyor civil lab material testing , Best Institute in Rawalpindi islamabad Pakistan Lahore , Lowest fee course in pakistan , lowest fee professional practical training course in pakistan rawalpindi peshawar kashmir bagh lahore islamabad kahuta chakwal rahimyar khan gujarat gujarawala multan , attock Best institute in rawalpindi professional teacher and qualified staff.Dubai , Abu Dabi , Muscat , Oman , Doha , Qatar ,South Africa , Saudia Arabia , kawat , Behrain , Kotli Sattian , Murree , UK , UAE , Sharja,Civil Technology Courses Diploma in Civil Surveyor Diploma in Quantity Surveyor Professional chef Cook Executive chef Head cook Sous chef Pastry chef Food preparation worker Station chef Short-order cook Line cook Introduction to the kitchen and the hospitality & catering industry. History of cooking Kitchen Terminology & French Basic ingredients & Mise-en-place Personal Hygiene, Kitchen Safety & First Aid Food Safety Cooking Methods & Principals Ingredients Basic numeracy and kitchen accounting Personal Development Basic computer literacy and research Food Preparation methods and techniques Introduction to nutrition Practical cookery, Test and Exams

Chef and Cooking Course in Rahimyar Khan Mandi Bahauddin,Chef and Cooking Course in Rawalpindi Attock Dubai,international college of technical education in rawalpindi attock dubai muscat oman bahrain kuwait china uk usa canada,best chef and cooking diploma course in rawalpindi attock dubai punjab pakistan,Culinary Arts is nothing but the art of cooking. A culinary arts course trains aspirants to prepare, cook as well as present food/ meals in an effective and attractive manner.You can do a diploma course in culinary arts or hotel & hospitality management after your high school to get into the culinary world. However, a formal Bachelor degree is always advantageous.This one-year course is designed for second year Culinary Arts students who will be continuing their education in safety, sanitation, nutrition, professional grooming, and food preparation techniques and procedures. The course will also cover career opportunities,employability skills, customer service, food costs, and inventory controls. Students at this level will engage in a hands-on food service operation and will be rotated through all the jobs. Emphasis will be on quality food preparation, teamwork, developing a critical palate,and researching current culinary trends.The qualification is a mix of practical and theoretical sessions but with a strong emphasis on the practical element. As well as the key cooking subjects, the curriculum also covers menu planning and budgeting, food safety and other professional kitchen skills.The qualification develops culinary skills by working in a kitchen environment which will be enhanced through demonstrations, appropriate theory sessions. Students develop knife skills, familiarity with produce, and master many professional skills such as butchery, fish preparation and pastry work, to an appropriate level.This culinary medicine course offers a deep dive into culinary coaching, an evidence-based telemedicine strategy that combines culinary training with health and wellness coaching to improve nutrition. Attendees receive the latest updates of the culinary coaching approach and acquire new skills, tools, and resources to empower patients to adopt sustainable and nutritious home-cooking behaviors. The economics of health care reform increasingly pressure clinicians to promote healthy nutrition. This course provides education and experience that will keep clinicians at the forefront of this critical global trend, leading by example to improve and increase healthy eating for patients and themselves.Rawalpindi, Islamabad, Lahore, Karachi, Gilgit, Skardu, Ghangche, taxila, Shigar, Astore, Diamer, Ghizer, Kharmang, Gultari, Rondo, Hunza Nagar, Gupi, Azad Jammu and Kashmir, Muzaffarabad, Mirpur, Bhimber, Kotli, Rawlakot, Bagh, Bahawalpur, Bhakkar, Chakwal, Chiniot, Dera Ghazi Khan, Faisalabad, Gujranwala, Gujrat, Hafizabad, Jhang, Jhelum, Kasur, Khanewal, Khushab, Layyah, Lodharan, Mandi-Bahuddin, Mianwali, Multan, Muzaffargarh, Nankana Sahib, Narowal, Okara, Pakpattan, Rahim Yar Khan, Rajanpur, Sahiwal, Sargodha, Sheikhupura, Sialkot, Toba tek Singh, Vehari, Attock, Taxila, Wah Cantt, Rawalpindi, Balochistan, Khyber-Pakhtunkhwa, Punjab, Sindh, Gilgit Baltistan, Turbat, Sibi, Chaman, Lasbela, Zhob, Gwadar, Nasiraba, Jaffarabad, Hub, Dera Murad Jamali, Dera Allah Yar, Khyber-Pakhtunkhwa, Peshawar, Mardan, Abbottabad, Mingor, Kohat, Bannu, Swabi, Dera Ismail Khan, Charsadda, Nowshera, Mansehra, Hyderabad, Sukkur, Larkana, Nawabshah, Nanak wara, Mirpur Khas, Jacobabad, Shikarpur, Khairpur, Pakistan.Experienced Based Diploma in Ac Technician ,Electronic , Mechanical , Plumbing , Auto Electrician , Efi Auto Electrician , Civil Surveyor , Quantity surveyor civil lab material testing , Best Institute in Rawalpindi islamabad Pakistan Lahore , Lowest fee course in pakistan , lowest fee professional practical training course in pakistan rawalpindi peshawar kashmir bagh lahore islamabad kahuta chakwal rahimyar khan gujarat gujarawala multan. Foodpairing Chef Cuisine Food studies Fooding Gastronomy Gourmet Library and museum Hospitality industry Restaurant

Experienced Based Civil Surveyor Diploma Course in Attock kahuta Oman .ICTE offers different types of international Courses which are accepted in domestic country as well as in international coutries i.e China Japan Korea Saudia Dubai Muscat Oman Iran Tehran Qatar and all other international countries.Admission open for both boys and girls 03115193625.Experienced Based Civil Surveyor Diploma Course in Attock kahuta Oman .Best institute international college of technical education offers experienced based diplomas in different courses like civil surveyor, electrical technician,mechanical engineering,chef and cooking, Ac technician and refrigeration and also offers many type of experienced based diplomas. International college of technical education also offers regular classes of these courses and many type of other courses. International college of technical education is a symbol of quality and excellence. Our experienced instructors, state of the art infrastructure and best students facilities, provide an excellent academic environment, which makes us distinctive and one of best institutions in Pakistan. This course is focused on developing the skills needed to accurately measure land, air and water space. This course program includes extensive field practice in the use of electronic and optical instruments used for measuring distance, elevations and angles from one point to another.In this context, our students experience live work on latest equipment such as lite auto level GPS, total station electronics laser, and lite DTSA.After successful completion of this course, students would be able to join as Quantity surveyor in construction industry and also they would be able to start their own business. The pass out of this course may work in the following sectors areas and positions as skilled professional.After successful completion of this course, students would be able to join as Quantity surveyor in construction industry and also they would be able to start their own business. The pass out of this course may work in the following sectors areas and positions as skilled professional.Land survey technologies programs teach students the techniques involved in surveying plots of land with different tools and equipment. While there are job opportunities available with only this level of education, students might need to enter bachelor's degree programs in order to find employment and earn licensure. Experienced Based Civil Surveyor Diploma Course in Rawalpindi, Islamabad, Lahore, Karachi, Gilgit, Skardu, Ghangche, taxila, Shigar, Astore, Diamer, Ghizer, Kharmang, Gultari, Rondo, Hunza Nagar, Gupi, Azad Jammu and Kashmir, Muzaffarabad, Mirpur, Bhimber, Kotli, Rawlakot, Bagh, Bahawalpur, Bhakkar, Chakwal, Chiniot, Dera Ghazi Khan, Faisalabad, Gujranwala, Gujrat, Hafizabad, Jhang, Jhelum, Kasur, Khanewal, Khushab, Layyah, Lodharan, Mandi-Bahuddin, Mianwali, Multan, Muzaffargarh, Nankana Sahib, Narowal, Okara, Pakpattan, Rahim Yar Khan, Rajanpur, Sahiwal, Sargodha, Sheikhupura, Sialkot, Toba tek Singh, Vehari, Attock, Taxila, Wah Cantt, Rawalpindi, Balochistan, Khyber-Pakhtunkhwa, Punjab, Sindh, Gilgit Baltistan, Turbat, Sibi, Chaman, Lasbela, Zhob, Gwadar, Nasiraba, Jaffarabad, Hub, Dera Murad Jamali, Dera Allah Yar, Khyber-Pakhtunkhwa, Peshawar, Mardan, Abbottabad, Mingor, Kohat, Bannu, Swabi, Dera Ismail Khan, Charsadda, Nowshera, Mansehra, Hyderabad, Sukkur, Larkana, Nawabshah, Nanak wara, Mirpur Khas, Jacobabad, Shikarpur, Khairpur, Pakistan. For further details of this course visit our website www.icollegete.com,www.courses.com.pk

Physiotherapy course in Islamabad, Rawalpindi, Lahore, Peshawar, Mardan, Sawabi, Swat, Kohat and Pakistan O3345148115 Programs for aspiring physiotherapists are offered at the doctoral level at 2-year institutions. The most common program is the Doctor of Physical Therapy (DPT). During the program, students get clinical training at a lab and complete full-time supervised clerkships or internships that take several weeks each. Graduates can participate in a clinical residency if they want to pursue a specialty. Aspiring physiotherapists need to pass their state's licensure exam and meet other requirements that vary by state. Clinical specialty certification is also available from the American Board of Physical Therapy Specialties. In keeping with recent growth and advancement of Physical Therapy professional in the world and especially in the United States of The America, Doctor of Physical Therapy (DPT) curriculum has been developed to prepare Physical Therapists for the independent practice in Pakistan, by emphasizing area such as differential diagnosis, applied pharmacology, diagnostic imaging, health care prevention and practice manager. However, with the increased recognition of Physical Therapist’s skills in diagnosing, treating and preventing illness and injuries has necessitated the profession to re-evaluate its goals for the future and move toward more autonomy in patient care. According to America Physical Therapy association (APTA) “the vision for the future of the Physical Therapy profession is that by year 2020 Physical Therapy, treatment will be provided by Physical Therapists holding Doctor’s degree in Physical therapy, recognized by consumer and other health care professions as practitioners of choice to whom consumer have direct access for the diagnosis of, intervention for, and prevention of impairment, functional limitation and disabilities related to movement, function and health. Since there is general trend of Physical Therapists to seek employment and admission for further studies in United States of America, it has become necessary to bring the courses of study in Pakistan at par. The program will also meet the requirement for Non interventional independent practice in home land. Wateem Physiotherapy education is based on a fully integrated curriculum and includes interdisciplinary studies. Commencing Semester 1, the curriculum is structured around patient centered learning. Conditions for which people typically seek physiotherapy provide the context for integrating learning about biomedical sciences and physiotherapy skills. In the later years of the course, the focus moves from campus based patient scenarios to learning in a clinical environment. This provides opportunities for students to appreciate the relevance of on-going learning in the context of supervised health care delivery. Wateem Physiotherapy education facilitates development of skills through small group learning. Other features of this degree are opportunities to experience rural health care delivery and Inter-Professional Education (IPE). In IPE, students spend some time each semester learning and collaborating with students enrolled in other health science courses including Occupational Therapy, Nursing, Paramedic and Radiography. The Bachelor of Physiotherapy (Honours) is a challenging and demanding course. Students can expect to spend significant time in self-directed learning that supports the course of study. Students will be expected to be fit to undertake the course by accepting responsibility to maintain their health and take adequate rest. Clinical attachments across all years of the course are compulsory. In the third and fourth years of study, the majority of time is spent in clinical education. Some flexibility may be required of students, both in terms of hours worked at clinics, and scheduling of clinical attachments. Students can expect to have rural attachments during the course Students should take these matters into consideration when considering casual employment. Physical Therapy, also known as physiotherapy is a dynamic profession concerned with evaluation and rehabilitation of patient disabled by pain, disease, or injury and their treatment by physical therapeutic measure. The objective of the program is to produce group of highly competent physiotherapists to fulfill the increasing at national and international level. Doctor of physiotherapy (DPT):- The doctor of physiotherapy (DPT) – 5 years program is a Post-baccalaureate degree conferred upon successful completion of duration. The DPT Degree was created by American Physiotherapy Association (APTA). The “Vision 2020” states that “By 2020, physical therapy will be provided by physical therapists who are doctors of physiotherapy recognized by consumers & other health-care professionals as the practitioners of choice to whom consumers have direct access for the diagnosis of, intervention for, & prevention of impairments, functional limitations, & disabilities related to movement, function & health. History of Physiotherapy in Pakistan:- The school of Physiotherapy was established in 1956 by the Federal Government, Ministry of Health & Social Welfare with the assistance of World Health Organization (WHO) at Jinnah Postgraduate Medical Center premises. Initially, the school offered a 2 years Diploma course with the minimum entrance qualification of matriculation (science group). In 1961, the 2 years program was upgraded to a 3 years Diploma. Later on, the program was raised to BSc Physiotherapy Degree (3 years) in 1963, affiliated with the University of Karachi, and pertinent changes were added & made in the syllabus according to the need. The International faculties of Physiotherapy had upgraded their syllabi. In order to match those standards; in 1999, BSc Physiotherapy course was upgraded to 4 years BS Physiotherapy Degree Course. Recently, following the “Vision 2020 of APTA”, the 4 years BSPT Program was upgraded to 5 years DPT (Doctor of Physiotherapy) Program in 2008 to meet the International standard. At present, 26 Institutions are serving in the field of Physiotherapy in Pakistan. Here are common topics covered in physiotherapist courses: Musculoskeletal system Standards of care Patient assessment Prosthetics Reflexes Therapy techniques List of Courses Gross Human Anatomy Course Gross anatomy courses cover the cardiovascular and musculoskeletal systems of the human body, focusing on the functional and structural relationships between organs, tissues and joints. Specific areas of the body studied include tendons, muscles, spine, sensory systems and internal organs. Students attend lectures and discussions. In many programs, students complete a lab where they dissect a cadaver. This course is taken early on in the physical therapy degree program. Pharmacology in Physical Therapy The focus of this course is on how different classes of pharmaceuticals affect human the biochemistry and physiology of neural synapses and neurotransmitters. Classes of drugs studied include anticholinergic drugs, anticonvulsants, catecholarmines and antidepressants. Students learn about possible side effects and ways in which certain drugs may or may not be useful to a patient. Psychosocial Aspects of Physical Therapy Course This advanced course in physical therapy addresses the psychological issues which may arise with a patient facing illness or injury. Students are asked to perform self-assessments with regard to conflict management styles, communication styles, personal values and response to stress. Emphasis is on the issues which may arise during physical therapy, death and dying, addiction, sexuality, family and other areas among patients from diverse cultural and religious backgrounds. Clinical Research Course This course introduces students to basic concepts in clinical research for physical therapy and functions as a guided preparation for the student's own research. Areas covered include hypothesis testing, literature review, data collection techniques and results analysis. Students read scholarly literature in the areas of personal interest to come up with ideas for their own research projects.

PSM HSE Course in Pakistan,PSM HSE Course in Pakistan,psm hse safety diploma course in rawalpindi islamabad pakistan,best training course in rawalpindi,professional psm hse advance course in rawalpindi lahore pakistan,admission open for boys and girls certification acceptable world wide Office # 27, Second Floor, Maryam Shadi Hall Plaza (Airies Plaza), Shamsabad, Murree Road, Rawalpindi, Pakistan 0311-5193625, 0092-335-4176949,A World Recognized HSE Certificate from World Safety Organization. Training with Clarionttech gives you the best of Safety training and experience and also gives you an internationally recognized certificate that can be used anywhere in the world.NEBOSH and Health and Safety Executive (HSE), the UK's Health and Safety Regulator, developed this Process Safety Management (PSM) qualification taking the knowledge of best practices applied widely for process industries such as oil and gas, refinery, chemicals, plastics, pharmaceuticals and food etc.NEBOSH HSE Certificate in Process Safety Management is a specialized course jointly designed by UK's Health and Safety Executive (HSE) and NEBOSH for the people working in process industries such as oil and gas, chemicals, plastics and pharmaceuticals.To become a safety officer, you need postsecondary education and specialized training. Though some jobs require a master's degree in occupational health or a related field, most safety officer jobs only require a bachelor's degree. You should study the basics of occupational health and safety, including OSHA standards.The NEBOSH HSE Certificate in Process Safety Management has been jointly designed by NEBOSH and the UK enforcement agency – the Health and Safety Executive (HSE). It is designed specifically for those with safety responsibilities in the process industry, such as chemical manufacturing and oil & gas. It focuses on international standards and management systems, highlighting the importance of process safety management in the process industry, enabling students to effectively discharge workplace safety responsibilities.The NEBOSH Certificate in Process Safety Management is a technical qualification. There are no specific entry requirements but the course does assume a certain level of knowledge.The NEBOSH HSE Certificate in Process Safety Management is suitable for those who have the responsibility for ensuring safety as part of their day-to-day duties including:Managers, supervisors and employee representatives within the process industry,Newly-appointed health and safety advisers. Update your skills on modern concepts of machinery and work equipment safety Standards and Directives Help selecting a criteria for integrating health and safety specifications for machinery and work equipment Improve experience in the application of reliability technology for the selection of appropriate Safety Integrity Levels ‘SIL’s for protective and safety systems Ensure consistent optimisation of resource allocation for production, maintenance and safety, based on risk and cost-benefit analysis. Provide HSE practitioners with a route for gaining NEBOSH Part II- Diploma qualifications in safety technology. To provide participants with an understanding of engineering noise control principles and options. Improve your practical application of reliability and risk assessment techniques to new projects and existing machinery/systems Update knowledge on modern concepts of machinery and work equipment safety Standards and Directives Develop a clear understanding of machinery and work equipment risk assessment techniques Assist project engineers in selecting a criteria for integrating health and safety specifications for machinery and work equipment Develop experience in the application of reliability technology for the selection of appropriate Safety Integrity Levels ‘SIL’s for protective and safety systems Ensure consistent optimisation of resource allocation for production, maintenance and safety, based on risk and cost-benefit analysis Provide HSE practitioners with a route for gaining NEBOSH Part II- Diploma qualifications in safety technology Develop an understanding of engineering noise control principles and options. Emphasis throughout the course will be placed on the practical application of reliability and risk assessment techniques to new projects and existing machinery/systems

Degree Attestation Services In Pakistan, Documents Attestation Services In Pakistan OnlineAttestationPakistan.com Providing The Best Attestation Services In Pakistan. Educational Documents Attestation Services In Pakistan, Degree Attestation Services From Ministry Of Foreign Affairs In Pakistan, Certificate Attestation Services From HEC , IBCC Online In Pakistan. Online Attestation Services In Pakistan Offering : HEC Degree Attestation From Pakistan Degree Attestation Procedure In Pakistan Documents Attestation Requirements In Pakistan Certificate Attestation Process In Pakistan IBCC Attestation Procedure Or IBCC Equivalence Certificate Issuance For O and A Level`s In Pakistan. British Council Attestation From Pakistan Degree Attestation Service For Higher Education HEC In Pakistan Transcript / Marksheets Attestation Services From University Of Karachi, Lahore, Islamabad Pakistan. Duplicate Certificate / Marksheet / Degree Issuance From Pakistan Diploma Attestation Services From Pakistan Such as Sindh Technical Board Or Punjab Technical Board Attestation WES IQAS ICES ICAS CES Canada Immigration Consultation & Attestation Services For Equivalence Report ECA Services . Attestation Services Of Marksheets / Degree Copies Or Original In Sealed Envelope And Courier Through FBISE (Federal Board) , IBCC Board Or HEC Sealed Envelope Saudi Cultural And Saudi Embassy Attestation Services From Pakistan UAE Embassy Or Dubai Embassy Attestation Services From Pakistan MOFA Pakistan Attestation Services Or Attestation Agents In Pakistan Kuwait, Oman , Qatar, China Embassy Attestation Services In Pakistan PEC or Experience Letter Attestation Services From Pakistan Translation Services Of Nikkah Nama Into English or Arabic Certified Translations Notarization And Attestation Services From Notary Public In Pakistan Marriage Certificate Or Birth Certificate Attestation Services From Saudi Embassy Or UAE Embassy Or Ministry Of Foreign Affairs Office In Pakistan School Leaving Certificate Attestation Services From Pakistan Lost Degree / Marksheet / Certificate Issuance From University In Karachi , Lahore, Islamabad Pakistan Nadra Birth Certificate, Marriage Certificate , Divorce Or Death Certificate Issuance From Pakistan. No Entry or No Birth Record Or Non Availibility Of Birth Certificate, Unmarried Certificate, Single Certificate, Bachelor Certificate, Issuance From Nadra Pakistan. Attestation Services For Job, Visa , Immigration, Sponsorship Or Travel From Karachi, Lahore, Islamabad In Pakistan. Name Change , Correction Of Date Or Complete Syllabus From University Or College Or Date Of Birth / Marriage / Unmarried Certificate Solutions From Pakistan. Dont Just Rely On TCS, Fedex, Leapord Courier, DHL Courier Services. Ensure Your Documents Safety and Return With Our Trusted Expertise And most trust worthy reliable services. Now Don`t worry about on Confusions in Google Search Like : How To Get Birth Certificate From Pakistan ? How To Attest Degree From Hec In Pakistan ? Who Issues Birth Or Marriage Certificate In Pakistan ? Where To Apply For IBCC Attestation In Pakistan ? Answer : we got all solutions for all your answers right here Online Attestation Pakistan Payoneer In Providing Services For More Then 15 Years In Pakistan. We Provide Complete Procedure & Details Such as Procedure, Requirements, Process, Answers, Days, Office, Results, Fees, Apply, Details , Information reliable Authentic Genuine & Urgent Service For All Type Of Documentation & Attestation Services From Pakistan. Serving Overseas and Domestic Pakistani`s In Various Cities And Country Around The Globe. Served Over 6600 Clients In More Then 50 States Such As Sydney, Australia Riyadh, Mecca ,Meddina Saudi Arabia Dubai , Abu Dhabhi , Sharjah , UAE United Arab Emirates Muscat , Oman, Bahrain , Kuwait , Qatar England, London , United Kingdom UK New York NYC, Chicago, Texas USA United States Spain, France, Germany, Austria, Belgium, Russia, Beijing, China Toronto, Ontario, Canada Sweden, Switzerland, Cairo, Egypt, New Zealand Ireland, Denmark, Brazil, Congo, Domican Republic Malaysia, Thailand, Indonesia, Maldives, Czech & Other Countries/States. So Dont Wait And Click On http://onlineattestationpakistan.com, Get Contacted By Our Team Instantly. OnlineAttestationPakistan : Accelerating Solutions For You

Diploma in Information Technology Course in Rawalpindi Saddar Pakistan,Diploma in Information Technology Course in Rawalpindi Ghori Town Pakistan,international college of technical education in rawalpindi islamabad pakistan,best dit institute in rawalpindi islamabad pakistan,professional advance dit course in rawalpindi punjab pakistan,lowest fee dit diploma course in rawalpindi pakistan,admission open for boys and girls new session start on 28 September 2020 certification acceptable in government job and worldwide International College of Technical Education.Head Office :Office # 27, Second Floor, Maryam Shadi Hall Plaza (Airies Plaza), Shamsabad, Murree Road, Rawalpindi, Pakistan 0311-5193625, 0092-335-4176949,What is dit course? Diploma in Information Technology is a Diploma level Information Technology course. Information Technology is the acquisition, processing, storage and dissemination of vocal, pictorial, textual and numerical information by a microelectronics-based combination of computing and telecommunications.A digital imaging technician chief (DIT) works in the motion picture industry. The DIT position was created in response to the transition from the long established film movie camera medium into the current digital cinema era.The DIT is the camera department crew member who works in collaboration with the cinematographer on workflow, systemization, camera settings, signal integrity and image manipulation to achieve the highest image quality and creative goals of cinematography in the digital realm.The Course aims to producing the trained man-power in the field of Information Technology to fulfill employment requirement of I.T. industry not only in the country, but also abroad. The curriculum is divided into two academic semesters The curriculum of Semester-I is designed to train the students to work as database developer and work on the MS-office alongwith touch of E-Commerce. The curriculum of semester-II is designed to train the students in the field of Networking, Graphics Design & Animation and interactive web development.The ICTE is to provide knowledge and Technical competence in Informatics and the field of Information Technology (IT) or to the student who wants to pursue further studies in computing fields.Directors have decided not to recruit / enrol any new students in the Diploma of Information Technology course, effective 20th September 2019. This decision does not affect currently enrolled students, since units within their course will continue to be available for them to study and graduate, and the Diploma will be in a “teach out” study mode over the next two years.The Diploma of Information Technology (DIT) ) lays foundations in computing, computer hardware and architecture, web and multimedia technologies, operating systems and database technologies. It is delivered as a hands-on practical experience and learning course with different computer technologies, in both individual and collaborative modes. It also provides appropriate entry points for employment in the IT industry or entry into the second year of a relevant Bachelor course. DIT Course Contents: 1:Introduction to information technology 2:Hardware Software storage devices 3:Fundamentals of Network 3:Introduction to database 5:Ms Access 6:Graphic Designing 7:Operating System 8:Office Automation 9:Computer Language C/C++ 10:Project Introduction to Computer & Operating System (DOS, Windows & Server) Business Application (MS-Word 2010, MS-Excel 2010, MS-PowerPoint 2010) Internet Management & E-Commerce Database Management using MS-Access 2010 Programming Fundamentals, Flow Charts and Programming with VB.Net Functional English-I Work Ethics-I Graphic Design & Animation System Analysis & Design Introduction to Computer Networking Web Development Functional English-II Work Ethics-II Project www.icollegete.com www.courses.com.pk admission open for boys and girls new session start on 28 September 2020 certification acceptable in government job and worldwide International College of Technical Education.Head Office :Office # 27, Second Floor, Maryam Shadi Hall Plaza (Airies Plaza), Shamsabad, Murree Road, Rawalpindi, Pakistan 0311-5193625, 0092-335-4176949 Diploma in Information Technology Course in Rawalpindi Saddar Pakistan.

Govt Approved Electrical Engineering Diploma Course in Islamabad, Govt Approved Electrical Engineering Diploma Course in Rawalpindi, Govt Approved Electrical Engineering Diploma Course in Gujranwala, Govt Approved Electrical Engineering Diploma Course in Sialkot, Govt Approved Electrical Engineering Diploma Course in Sargodha, Govt Approved Electrical Engineering Diploma Course in Gujrat, Govt Approved Electrical Engineering Diploma Course in Lahore, Govt Approved Electrical Engineering Diploma Course in Faisalabad, Govt Approved Electrical Engineering Diploma Course in Multan, Govt Approved Electrical Engineering Diploma Course in Mandi Bahauddin, Govt Approved Electrical Engineering Diploma Course in Bahawalpur, Govt Approved Electrical Engineering Diploma Course in Attock, Govt Approved Electrical Engineering Diploma Course in Chakwal, Govt Approved Electrical Engineering Diploma Course in Mirpur, Govt Approved Electrical Engineering Diploma Course in Bagh, Govt Approved Electrical Engineering Diploma Course in Rawala kot, Govt Approved Electrical Engineering Diploma Course in Kotli, Govt Approved Electrical Engineering Diploma Course in Karachi, Govt Approved Electrical Engineering Diploma Course in Hyderabad, Govt Approved Electrical Engineering Diploma Course in Mardan, Govt Approved Electrical Engineering Diploma Course in Peshawar, Govt Approved Electrical Engineering Diploma Course in Swat, Govt Approved Electrical Engineering Diploma Course in Rawat, Govt Approved Electrical Engineering Diploma Course in Sawabi, Govt Approved Electrical Engineering Diploma Course in Sahiwal, Govt Approved Electrical Engineering Diploma Course in Sakkar, Govt Approved Electrical Engineering Diploma Course in Haripur, Govt Approved Electrical Engineering Diploma Course in Pakistan O3165643400, O3119903317,Govt Approved Electrical Engineering Diploma Course in Islamabad, Pakistan O3165643400, O3119903317 Electrical power and systems are at the heart of modern society – and so too are electrical and electronics engineers. Engineers specializing in these fields have transformed the 21st century with technologies such as universal electric power systems, television, radio and medical imaging to name just a few examples. Our department has one of the finest faculty in the country who have studied and worked for institutions of international repute. The faculty members are dedicated to carrying out research and involving capable students in individual projects. The Department of Electrical Engineering has a carefully designed curriculum which offers a wide range of knowledge, aiming at an integrated education and training of future technologists, entrepreneurs and engineering workforce for the private and public sector. It is important to highlight that both Higher Education Commission (HEC) and Pakistan Engineering Council (PEC) recognize BS in electrical engineering program at Oasis Institute of Skill and Technologies International. Welcome to the Electrical Engineering Department (EED) at Oasis Institute of Skill and Technologies International, Islamabad. At Oasis Institute of Skill and Technologies International, our students have access to a wide array of subjects, including electronics, communication systems, control systems, power systems, microwave engineering, digital signal processing, renewable energy, bioelectronics, robotics and photonics. Our goal for students is to give them a high-quality engineering education that includes hands-on experience. Among the most famous electronics and electrical engineers that you may have heard of are Nikola Tesla (pioneer of commercial electricity and electromagnetism), Thomas Edison (developer of the light bulb and inventor of the record player), Jack Kirby (inventor of the pocket calculator and the integrated circuit), Mercian Hoff (inventor of the microprocessor) and Martin Cooper (inventor of the mobile phone). Electrical engineering degrees will equip students with knowledge of how the industry works, as well as giving them the engineering skills and technological knowledge needed to design, assess and improve electrical and electronic systems. The difference between electrical and electronics engineering is often blurred, but it is generally true to say that electrical engineers are concerned mainly with the large-scale production and distribution of electrical power, while electronics engineers focus on much smaller electronic circuits. If you’re interested in how electrical devices work, are inquisitive, and have a strong interest in mathematics and science, then you probably already have some essential engineering skills and an electrical or electronics engineering degree may well be for you. Although technical knowledge is essential, electrical engineers are also involved in designing and building a range of devices, often within teams. At bachelor level, an electrical engineering degree will aim to give students grounding in the underlying principles of electronic and electrical engineering, before allowing specialization in an area of interest later on in the course. Students will also be involved in projects working within groups. Like most engineering subjects, it is best to imagine that you will be committed to your course every day of the working week. Although you almost certainly won’t be sitting in lectures for eight hours a day, your study timetable will be busy and will feature a range of learning methods, including laboratory work, tutorials, lectures, project work, group work and individual research. Course Outline: Linear Circuit Analysis Linear Circuit Analysis Lab Workshop Practice Lab Applied Physics Applied Calculus Introduction to Computing Introduction to Computing Lab Islamic Studies

Chef and Cooking Diploma Course in Sahiwal, Taxila international college of technical education course will be started soon in international college of technical education. the best courses of institute. The full diploma courses in international college of technical education. The Admission open and start the classes, 03115193625. The coursework in culinary arts B.S. programs emphasizes culinary theory, cooking skills and the scientific and business aspects of the food service industry. Courses teach the skills necessary for a variety of food service careers, including restaurant management and advanced food preparation. You can do a diploma course in culinary arts or hotel & hospitality management after your high school to get into the culinary world. However, a formal Bachelor degree is always advantageous. More of a hands-on chef than the executive chef, the assistant chef supervises all the other chefs, including teaching them, correcting techniques and cooking as necessary. Large restaurants may have more than one assistant chef. The toque is a chef's hat that dates back to the 16th century. Different heights may indicate rank within a kitchen, and they are designed to prevent hair from falling into the food when cooking. The 100 folds of the toque are said to represent the many different ways a chef knows to cook an egg. In most cases, the restaurant will choose the colour and style of uniform it wants its chefs and cooks to wear. ... black can hide stains and enables establishments to have their chefs working in open kitchens exposed to diners' eyes. The Italian Massimo Bottura is the number one chef in the world who, at his three Michelin starred restaurant, Osteria Francescana of Modena, has brought contemporary Italian cuisine to global notoriety. The ResDiary interactive content shows that Gordon Ramsay was trained by a multitude of renowned chefs including; the Roux Brothers, Joel Robuchon, Marco Pierre White, Pierre Koffmann and Guy Savoy, who have all influenced Ramsay's skill set that has won him a grand 16 Michelin stars. Yes, you can be considered a chef without going to culinary school. In America at least, chef is an informal title and refers to a job rather than a level of education, most of the time. A chef may not be aggressive, may not be rude, but may still be vulgar. It is part of the culture of the kitchen, in part because it is such a testosterone charged atmosphere (heat, fire, knives, stress, adrenaline rush for hours at a stretch to get the food out, etc). Yes, you can make big money and yes, it can be really profitable but in all likely hood you will be working long hours, with low pay, in a thankless job when everyone else is socializing. If you are passionate, can cope with huge amounts of stress and swearing then you could make it as a chef. Chef and Cooking diploma course in Rawalpindi, Islamabad, Lahore, Karachi, Gilgit, Skardu, Ghangche, taxila, Shigar, Astore, Diamer, Ghizer, Kharmang, Gultari, Rondo, Hunza Nagar, Gupi, Azad Jammu and Kashmir, Muzaffarabad, Mirpur, Bhimber, Kotli, Rawlakot, Bagh, Bahawalpur, Bhakkar, Chakwal, Chiniot, Dera Ghazi Khan, Faisalabad, Gujranwala, Gujrat, Hafizabad, Jhang, Jhelum, Kasur, Khanewal, Khushab, Layyah, Lodharan, Mandi-Bahuddin, Mianwali, Multan, Muzaffargarh, Nankana Sahib, Narowal, Okara, Pakpattan, Rahim Yar Khan, Rajanpur, Sahiwal, Sargodha, Sheikhupura, Sialkot, Toba tek Singh, Vehari, Attock, Taxila, Wah Cantt, Rawalpindi, Balochistan, Khyber-Pakhtunkhwa, Punjab, Sindh, Gilgit Baltistan, Turbat, Sibi, Chaman, Lasbela, Zhob, Gwadar, Nasiraba, Jaffarabad, Hub, Dera Murad Jamali, Dera Allah Yar, Khyber-Pakhtunkhwa, Peshawar, Mardan, Abbottabad, Mingor, Kohat, Bannu, Swabi, Dera Ismail Khan, Charsadda, Nowshera, Mansehra, Hyderabad, Sukkur, Larkana, Nawabshah, Nanak wara, Mirpur Khas, Jacobabad, Shikarpur, Khairpur, Pakistan. for further detail of all courses our the website www.icollegete.com www.courses.com.pk

Dit Experienced Based Computer Course in Muzaffarabad Rawalakot Dubai,Dit Experienced Based Computer Course in Rawalpindi Attock Dubai,international college of technical education in rawalpindi attock dubai muscat oman bahrain kuwait qatar,best dit experienced based computer course in rawalpindi islamabad attock dubai pakistan,professional dit course in rawalpindi attock dubai icte,Diploma in Information Technology related to analysis, programming, computer organization, data management, systems development, computer communications, and professional practice and systems principles. The demand for information technology (IT) professionals has grown rapidly in the last decade. This main objective is to equipping students with the technical knowledge required for an IT environment and also developing skills in understanding IT applications in various corporate businesses and banking sectors.Well 'programme intended to develop high quality information technology manpower to meet the needs of industry and educational institutions as well as prepare candidates for advanced study in the field of information technology and computer science.IT Application. DIT program is covering topic like introduction of IT, office automation, web designing, C programming, MCP and A+ Certification. An ideal one year diploma program for young students has done their intermediate or equivalent level of education, Diploma program is recognized by Govt. of Punjab Board of Technical Education, click here to Online Classes Available dit admission 2016 dit online course free 6 month computer training dit foundation course what is dit computer course one year diploma courses in pakistan six month computer course certificate computer education in pakistan nutrition courses dit it courses in rawalpindi full computer course in urdu dit university syllabus what is computer diploma course dit course in peshawar dit course in karachi cdit trivandrum what is dit course dit fee structure dit masters in accounting 6 month diploma course in computer best institute for computer courses in karachi pakistan computer bureau what is diploma in information technology diet dehradun dit rathmines dit exam timetable 2016 3 year diploma in information technology diploma subjects for information technology diploma in computer.The ICTE is to provide knowledge and Technical competence in Informatics and the field of Information Technology (IT) or to the student who wants to pursue further studies in computing fields.Directors have decided not to recruit / enrol any new students in the Diploma of Information Technology course, effective 20th September 2019. This decision does not affect currently enrolled students, since units within their course will continue to be available for them to study and graduate, and the Diploma will be in a “teach out” study mode over the next two years.The Diploma of Information Technology (DIT) ) lays foundations in computing, computer hardware and architecture, web and multimedia technologies, operating systems and database technologies. It is delivered as a hands-on practical experience and learning course with different computer technologies, in both individual and collaborative modes. It also provides appropriate entry points for employment in the IT industry or entry into the second year of a relevant Bachelor course.Rawalpindi, Islamabad, Lahore, Karachi, Gilgit, Skardu, Ghangche, taxila, Shigar, Astore, Diamer, Ghizer, Kharmang, Gultari, Rondo, Hunza Nagar, Gupi, Azad Jammu and Kashmir, Muzaffarabad, Mirpur, Bhimber, Kotli, Rawlakot, Bagh, Bahawalpur, Bhakkar, Chakwal, Chiniot, Dera Ghazi Khan, Faisalabad, Gujranwala, Gujrat, Hafizabad, Jhang, Jhelum, Kasur, Khanewal, Khushab, Layyah, Lodharan, Mandi-Bahuddin, Mianwali, Multan, Muzaffargarh, Nankana Sahib, Narowal, Okara, Pakpattan, Rahim Yar Khan, Rajanpur, Sahiwal, Sargodha, Sheikhupura, Sialkot, Toba tek Singh, Vehari, Attock, Taxila, Wah Cantt, Rawalpindi, Balochistan, Khyber-Pakhtunkhwa, Punjab, Sindh, Gilgit Baltistan, Turbat, Sibi, Chaman, DIT Course Contents: Introduction to information technology Hardware Software storage devices Fundamentals of Network Introduction to database Ms Access Graphic Designing Operating System Office Automation Computer Language C/C++ Project

DIT Diploma Information Technology Course in Bagh Muzaffarabad,DIT Diploma Information Technology Course in Taxila Ghori Town Rawalpindi,international college of technical education in rawalpindi islamabad taxila pakistan,best dit diploma in information technology course in rawalpindi islamabad punjab kashmir kpk pakistan,professional dit course training in rawalpindi islamabad pakistan,admission open for boys and girls new session start 23 november 2020 Diploma in Information Technology is a Diploma level Information Technology course. Information Technology is the acquisition, processing, storage and dissemination of vocal, pictorial, textual and numerical information by a microelectronics-based combination of computing and telecommunications.Dit Course This course dit course in rawalpindi provides an overview of computing and computer science, including such topics as the history of computers, computer application, and basic understanding of various hardware components. Hands-on experience in installation and configuration is included. Students learn how software interacts with and controls the computer�s hardware elements. Analytical logic and troubleshooting skills are emphasized. Basic networking concepts are introduced. dit course in rawalpindi (Information Technology, Data types of data, information, History of computing Introduction to computer hardware and trouble shooting concepts. Hardware course outline IntroductionMs Office AdvancedWeb DesigningGraphic DesigningHardware NetworkingPHPOperating SystemC++Flash Class timing : Daily 1 Hour Course Fee:25000/- CIT course We Offer cit course in rawalpindi. cit course in basit it course in 3 months and 6th months in course in cit course in certificate in infromation tehconolgy course in ms office web designing graphic designing hardware and netowrking include all course in cit course in rawalpindi. cit course outline IntroductionMs Office Web Designing Graphic designing HardwareNetworkingInternet Class timing : Daily 1 Hour Course Fee:3 Months 9000/- Course Fee:6 Months 12000/- Dit Course This course dit course in rawalpindi provides an overview of computing and computer science, including such topics as the history of computers, computer application, and basic understanding of various hardware components. Hands-on experience in installation and configuration is included. Students learn how software interacts with and controls the computer�s hardware elements. Analytical logic and troubleshooting skills are emphasized. Basic networking concepts are introduced. dit course in rawalpindi (Information Technology, Data types of data, information, History of computing Introduction to computer hardware and trouble shooting concepts. Hardware course outline IntroductionMs Office AdvancedWeb DesigningGraphic DesigningHardware NetworkingPHPOperating SystemC++Flash Class timing : Daily 1 Hour Course Fee:25000/- CIT course We Offer cit course in rawalpindi. cit course in basit it course in 3 months and 6th months in course in cit course in certificate in infromation tehconolgy course in ms office web designing graphic designing hardware and netowrking include all course in cit course in rawalpindi. cit course outline IntroductionMs Office Web Designing Graphic designing HardwareNetworkingInternet Class timing : Daily 1 Hour Course Fee:3 Months 9000/- Course Fee:6 Months 12000/The ICTE is to provide knowledge and Technical competence in Informatics and the field of Information Technology (IT) or to the student who wants to pursue further studies in computing fields.Directors have decided not to recruit / enrol any new students in the Diploma of Information Technology course, effective 20th September 2019. This decision does not affect currently enrolled students, since units within their course will continue to be available for them to study and graduate, and the Diploma will be in a “teach out” study mode over the next two years.The Diploma of Information Technology (DIT) ) lays foundations in computing, computer hardware and architecture, web and multimedia technologies, operating systems and database technologies. It is delivered as a hands-on practical experience and learning course with different computer technologies, in both individual and collaborative modes. It also provides appropriate entry points for employment in the IT industry or entry into the second year of a relevant Bachelor course. DIT Course Contents: Introduction to information technology Hardware Software storage devices Fundamentals of Network Introduction to database Ms Access Graphic Designing Operating System Office Automation Computer Language C/C++ Project