Laser water cooled system

Water cooling system for laser process S&A CW-5000 CW-5000 water cooling system developed and produced by S&A company of China, it contains water tank, circulating pump, compressor, condenser, evaporator, fan and control parts.CW-5000 is suitable for cooling below 100W laser process. S&A CW-5000 is refrigeration type industrial water chiller of 800W cooling capacity and the temperature control in ±0.3℃ precision. It’s mainly used to have the heat generated during the laser device working that gone through the refrigerating cycle in compressor refrigeration system and eventually transferred to the air. The water temperature is able to be adjusted. CW-5000 water cooler parameter: Voltage:110V-220V; Frequency: 50/60Hz; Refrigerant: R-134a Pump power: 0.03KW/0.051KW/0.1KW; Tank capacity:6L Max. lift:10M-25M; Max. flow: 10L/min- 16L/min N.W: 24Kgs; G.W: 27Kgs; Dimension : 58 X 29 X 47 cm (L X W X H); Packing dimension: 70 X 43 X 58 cm (L X W X H) CONTACT S&A TE:+86-20-89301885 FAX:+86-20-84309967 SKYPE: teyuchiller Email:marketing@teyuchiller.com Website: http://www.teyuchiller.com

Water-cooled chiller S&A CW-5000 factory CW-5000 water-cooled chiller is developed and produced by S&A company of China. S&A CW-5000 is refrigeration type industrial water chiller of 800W cooling capacity and the thermoelectric control in ±0.3℃ precision. It’s mainly used to have the heat generated during the laser device working that gone through the refrigerating cycle in compressor refrigeration system and eventually transferred to the air. The water temperature is able to be adjusted. CW-5000 water-cooled chiller parameter: Voltage:110V-220V; Frequency: 50/60Hz; Refrigerant: R-134a Pump power: 0.03KW/0.051KW/0.1KW; Tank capacity:6L Max. lift:10M-25M; Max. flow: 10L/min- 16L/min N.W: 24Kgs; G.W: 27Kgs; Dimension : 58 X 29 X 47 cm (L X W X H); Packing dimension: 70 X 43 X 58 cm (L X W X H) About S&A Brand S&A produces more than 60000 units of industrial chillers by year, we always insist on Quality First in design and production. “S&A” and “TEYU” have been enjoying high reputation among hundreds of manufacturers which are from both at home and abroad, and export rate reaches above 60% CONTACT S&A TE:+86-20-89301885 FAX:+86-20-84309967 SKYPE: teyuchiller Email:marketing@teyuchiller.com Website: http://www.teyuchiller.com

Recirculating chiller for water cooled fiber laser CW-6100AT CW-6100AT recirculating chiller is developed and produced by S&A company, applied to cool 500W water cooled fiber laser machine CW-6100AT air cooled chiller is dual temperature and dual pump chiller of 4200W cooling capacity. It is able to cool the fiber laser and optic lens at the same time, multiple use for saving cost, space and manual move, quiteconvenient for the user. Water chiller features: 1. 4200W cooling capacity; optional environmental refrigerant; 2. ±0.5℃ precisely temperature control; 3. The intelligent temperature controller has 2 control modes, applicable to different applied occasions; with various setting and display functions; 4. Dual temperature and dual pump to satisfy different needs of fiber laser device and the lens; 5. With Ion adsorption filtrating and test functions conform to fiber laser device operating requirements; 6. Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm; 7. Multiple power specifications; CE approval; RoHS approval; CONTACT S&A TE:+86-20-89301885 FAX:+86-20-84309967 SKYPE: teyuchiller Email:marketing@teyuchiller.com Website: http://www.teyuchiller.com

Air and water cooled chiller CW-6000 China CW-6000 air and water cooled chiller is developed and produced by S&A company of China, it can be used for cooling down 3*100W co2 laser, a single 100W co2 RF laser, 100W solid-state laser or 22KW spindle. CW-6000 water cooler has 3000W cooling capacity with ±0.5℃ stability, it has 2 temperature control modes as constant temperature and intelligent temperature control. Under intelligent mode, the water temperature is adjusted according to ambient temperature. Air cooled chiller parameter: Voltage:110V-220V; Frequency: 50/60Hz; Refrigerant: R-22 / R-410a Pump power: 0.05KW/0.1KW/0.37~0.75KW; Tank capacity:15L Max. lift:10M/25M/28~53M; Max. flow: 13L/min- 70L/min N.W: 60Kgs; G.W: 70Kgs; Dimension : 67 X 47 X 89 cm (L X W X H); Packing dimension: 74 X 60 X 109 cm(L X W X H) CONTACT S&A TE:+86-20-89301885 FAX:+86-20-84309967 SKYPE: teyuchiller Email:marketing@teyuchiller.com Website: http://www.teyuchiller.com

Air cooled water chiller system S&A CW-5000 CW-5000 air cooled water chiller system is developed and produced by S&A company of China, it contains water tank, circulating pump, compressor, condenser, evaporator, fan and control parts. S&A CW-5000 is refrigeration type industrial water chiller of 800W cooling capacity and the temperature control in ±0.3℃ precision. It’s mainly used to have the heat generated during the laser device working that gone through the refrigerating cycle in compressor refrigeration system and eventually transferred to the air. The water temperature is able to be adjusted. CW-5000 water chiller parameter: Voltage:110V-220V; Frequency: 50/60Hz; Refrigerant: R-134a Pump power: 0.03KW/0.051KW/0.1KW; Tank capacity:6L Max. lift:10M-25M; Max. flow: 10L/min- 16L/min N.W: 24Kgs; G.W: 27Kgs; Dimension : 58 X 29 X 47 cm (L X W X H); Packing dimension: 70 X 43 X 58 cm (L X W X H) CONTACT S&A TE:+86-20-89301885 FAX:+86-20-84309967 SKYPE: teyuchiller Email:marketing@teyuchiller.com Website: http://www.teyuchiller.com

Industrial chiller for water cooled UV system CW-6100 Industrial chiller CW-6100 is developed and produced by S&A company of China. It is applied for cooling water cooled UV system CW-6100 has 4.2KW cooling capacity, ±0.5℃ stability, and Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm; CW-6100 water chiller parameter: Voltage:220V; Frequency: 50/60Hz; Refrigerant: R-22 / R-410a Pump power: 0.05KW/0.1KW/0.37~0.75KW; Tank capacity:15L Max. lift:12M/25M/28~53M; Max. flow: 13L/min- 70L/min N.W: 65Kgs; G.W: 77Kgs; Dimension : 67 X 47 X 89 cm (L X W X H); Packing dimension: 74 X 60 X 109 cm(L X W X H) About S&A Brand S&A produces more than 60000 units of industrial chillers by year, we always insist on Quality First in design and production. “S&A” and “TEYU” have been enjoying high reputation among hundreds of manufacturers which are from both at home and abroad, and export rate reaches above 60% CONTACT S&A TE:+86-20-89301885 FAX:+86-20-84309967 SKYPE: teyuchiller Email:marketing@teyuchiller.com Website: http://www.teyuchiller.com

Laser Welding System 180 Watt The multi-purpose laser welding system (also called as laser mould welder, mould repair) is specially designed for the mould industry and used in repairing of precision moulds, such as mould manufacture for digital products, mobile phone, toy, automobile and motorcycle, and moulding industry. Through the repairing of moulds, it is possible to reuse the moulds, save the production cost and improve the working efficiency significantly. This technology can also be used to modify the design or size of moulds to reduce the development period. Features The working principle of this laser deposition welding system is to use laser high thermal energy and the melting technology in spot to process the welding and repairing of minute parts. It makes up the shortage of traditional hydrogen arc welding in repairing precision surfaces, avoids the two difficulties of thermal strain and after-treatment, and saves the production period of mould. Advantages It is specially designed for the mould industry and the technology is imported from Germany. With unique structure design, it is suitable for repairing of large, medium and small moulds. 1. Ceramic converging cavity is imported from the Britain. It is corrosion resistant and high temperature resistant, and has 8-10 years service life. The life of xenon lamp is more than 8 million times. 2. Use the most advanced light shielding system to eliminate the irritation to eyes by light during working. 3. The laser head and optics part can be rotated for 360°, upward/downward lifting and forward/backward pushing, suitable for repairing of large, medium and small moulds. 4. The parameters are controlled by intelligent remote controller, which is simple and convenient. 5. The work bench can be lifted, and moved in three dimensions, the size of light spot can be adjusted. Suitable materials The materials that can be welded are extensive: cold work alloy steel, hot work alloy steel, nickel tool steel, high grade steel, steel alloy, high tenacity aluminum alloy, etc. Technical data Model ZEE-180 3-axis stroke of work bench X=300mm, Y=200mm (X, Y can be adjusted manually and Z-axis can be manually motorized to lift maximum 250mm.) Bearing of work bench ≤200kg Device weight 300kg Power supply 220V±10%/50Hz or 380V±10%/50Hz Laser parameters Laser parameters Laser type Nd:YAG pulse Adjusting range of light spot 0.1-0.3mm Size of light spot 0.2-3.0mm Laser wavelength 1064nm Pulse width ≤20ms Maximum laser power 180W/200W Pulse frequency ≤15Hz Laser output focus length 50mm/100mm/120mm (optional) Laser cooling Water cooling Observing system Microscope (360° adjustable) Protection gas One line (xenon) Welding wire diameter 0.1mm-0.6mm USD19800

closed loop air cooled water chiller with eco-friendly refrigeration CW-6000 closed loop air water cooled chiller is developed and produced by S&A company of China, it can be used for cooling down 3*100W co2 laser, a single 100W co2 RF laser, 100W solid-state laser or 22KW spindle. CW-6000 water cooler has 3000W cooling capacity with ±0.5℃ stability, it has 2 temperature control modes as constant temperature and intelligent temperature control. Under intelligent mode, the water temperature is adjusted according to ambient temperature. Air cooled chiller parameter: Voltage:110V-220V; Frequency: 50/60Hz; Refrigerant: R-22 / R-410a Pump power: 0.05KW/0.1KW/0.37~0.75KW; Tank capacity:15L Max. lift:10M/25M/28~53M; Max. flow: 13L/min- 70L/min N.W: 60Kgs; G.W: 70Kgs; Dimension : 67 X 47 X 89 cm (L X W X H); Packing dimension: 74 X 60 X 109 cm(L X W X H) CONTACT S&A TE:+86-20-89301885 FAX:+86-20-84309967 SKYPE: teyuchiller Email:marketing@teyuchiller.com Website: http://www.teyuchiller.com

Industrial chilled water system S&A CW-3000 factory CW-3000 industrial chilled water system is developed and produced by S&A company of China. S&A CW-3000 is thermoysis type water chiller, it doesn’t have compressor to control the temperature, working like a fan to radiate the heat. It does the heat exchange between the air and the water. The water temperature of cw-3000 chiller is related to ambient temperature, so it's thermostat is not manually adjusted. CW-3000 water cooled chiller features: 1. Radiating capacity: 50W / ℃; 2. Small thermolysis water cooler, energy saving, long working life and simple operation; 3. With completed water flow and over high temperature alarm functions; 4. Multiple power specifications; CE approval; RoHS approval; About S&A Brand S&A produces more than 60000 units of industrial chillers by year, we always insist on Quality First in design and production. “S&A” and “TEYU” have been enjoying high reputation among hundreds of manufacturers which are from both at home and abroad, and export rate reaches above 60% CONTACT S&A TE:+86-20-89301885 FAX:+86-20-84309967 SKYPE: teyuchiller Email:marketing@teyuchiller.com Website: http://www.teyuchiller.com

Air cooled Industrial water chiller CW-5200 China CW-5200 air cooled industrial water chiller is developed and produced by S&A company of China, it is suitable to cool 130W co2 laser, 8KW spindle, dual 100W glass laser or 50W-75W solid-state laser. S&A CW-5200 water chiller’s cooling capacity up to 1.4KW and the thermoelectric control in ±0.3℃ precision and temperature control range in 5-35℃. It is popular for its 2 temperature control modes as constant temperature and intelligent temperature control. CW-5200air cooled water chiller parameter: Voltage:110V-220V; Frequency: 50/60Hz; Refrigerant: R-22 / R-134a / R-410a Pump power: 0.03KW/0.05KW/0.1KW; Tank capacity:6L Max. lift:10M-25M; Max. flow: 10L/min- 16L/min N.W: 26Kgs; G.W: 29Kgs; Dimension : 58 X 29 X 47 cm (L X W X H); Packing dimension: 70 X 43 X 58 cm (L X W X H) CONTACT S&A TE:+86-20-89301885 FAX:+86-20-84309967 SKYPE: teyuchiller Email:marketing@teyuchiller.com Website: http://www.teyuchiller.com

Air cooled recirculating chiller for laser welding head S&A brand CW-6000 air cooled recirculating chiller is developed and produced by S&A company of China, it can be used for cooling down 200W-400W laser welding head. CW-6000 water cooler has 3000W cooling capacity with ±0.5℃ stability, it has 2 temperature control modes as constant temperature and intelligent temperature control. Under intelligent mode, the water temperature is adjusted according to ambient temperature. Air cooled recirculating chiller parameter: Voltage:110V-220V; Frequency: 50/60Hz; Refrigerant: R-22 / R-410a Pump power: 0.05KW/0.1KW/0.37~0.75KW; Tank capacity:15L Max. lift:10M/25M/28~53M; Max. flow: 13L/min- 70L/min N.W: 60Kgs; G.W: 70Kgs; Dimension : 67 X 47 X 89 cm (L X W X H); Packing dimension: 74 X 60 X 109 cm(L X W X H) CONTACT S&A TE:+86-20-89301885 FAX:+86-20-84309967 SKYPE: teyuchiller Email:marketing@teyuchiller.com Website: http://www.teyuchiller.com

Air Cooled Water Chillers CW-5000 China CW-5000 air cooled water chiller is developed and produced by S&A company of China, it contains water tank, circulating pump, compressor, condenser, evaporator, fan and control parts. S&A CW-5000 is refrigeration type industrial water chiller of 800W cooling capacity and the temperature control in ±0.3℃ precision. It’s mainly used to have the heat generated during the laser device working that gone through the refrigerating cycle in compressor refrigeration system and eventually transferred to the air. The water temperature is able to be adjusted. CW-5000 water chiller parameter: Voltage:110V-220V; Frequency: 50/60Hz; Refrigerant: R-134a Pump power: 0.03KW/0.051KW/0.1KW; Tank capacity:6L Max. lift:10M-25M; Max. flow: 10L/min- 16L/min N.W: 24Kgs; G.W: 27Kgs; Dimension : 58 X 29 X 47 cm (L X W X H); Packing dimension: 70 X 43 X 58 cm (L X W X H) CONTACT S&A TE:+86-20-89301885 FAX:+86-20-84309967 SKYPE: teyuchiller Email:marketing@teyuchiller.com Website: http://www.teyuchiller.com

Air cooled water cooler CW-3000 China CW-3000 air cooled water cooler is developed and produced by S&A company of China. It is very suitable for cooling low 80W co2 laser, dual 1.4KW spindle or welder. CW-3000 water cooler mainly contains water tank, circulating pump, heat exchanger, fan and other control parts. CW-3000 recirculating cooler features: 1. Radiating capacity: 50W/℃; 2. Small thermolysis water cooler, energy saving, long working life and simple operation; 3. With completed water flow and over high temperature alarm functions; 4. Multiple power specifications; CE approval; RoHS approval; Voltage:110V/220V; Frequency: 50/60Hz; Tank capacity:9L Max. lift:10M/70M; Max. flow: 10L/min/2L/min N.W: 9.5Kgs; G.W: 12Kgs; Dimension : 49 X 27 X 38 cm (L X W X H); Packing dimension: 59 X 39 X 48 cm (L X W X H) CONTACT S&A TE:+86-20-89301885 FAX:+86-20-84309967 SKYPE: teyuchiller Email:marketing@teyuchiller.com Website: http://www.teyuchiller.com

Portable Air water Coolers with compressor refrigeration CW-5000 portable air cooled water cooler is developed and produced by S&A company of China, it contains water tank, circulating pump, compressor, condenser, evaporator, fan and control parts. S&A CW-5000 is refrigeration type industrial water chiller of 800W cooling capacity and the temperature control in ±0.3℃ precision. It’s mainly used to have the heat generated during the laser device working that gone through the refrigerating cycle in compressor refrigeration system and eventually transferred to the air. The water temperature is able to be adjusted. CW-5000 water cooler parameter: Voltage:110V-220V; Frequency: 50/60Hz; Refrigerant: R-134a Pump power: 0.03KW/0.051KW/0.1KW; Tank capacity:6L Max. lift:10M-25M; Max. flow: 10L/min- 16L/min N.W: 24Kgs; G.W: 27Kgs; Dimension : 58 X 29 X 47 cm (L X W X H); Packing dimension: 70 X 43 X 58 cm (L X W X H) CONTACT S&A TE:+86-20-89301885 FAX:+86-20-84309967 SKYPE: teyuchiller Email:marketing@teyuchiller.com Website: http://www.teyuchiller.com

Fiber Laser marker fiber laser, marking head LSSL-1064-10-110-S, software LMC-USB, Technical Specifications: Laser Power: 10W Marking Depth: ≤0.3mm Laser Wavelength: 1060nm Marking Speed: ≤7000mm/s Beam Quality: 2 (M2) Marking Area: 100X100mm ,150X150mm Laser Type: pulsed or continued Minimum Character: 0.15mm Working Life: More than 100,000hours for lasers Minimum Line width: 0.012mm Cooling System: Air Cooled Repeat Accuracy: ±0.002 Power Consumption: 500W Repeat Frequency: 20-100KHZ Temperature: 10°C-35°C Operating System: Win98/Win2000/WinXP Humidity: 5%-75% Interface: Standard USB Product Dimension: 570mmX270mmX200mm File Format: All formats compatible with MS Windows. Weight: 30kg Working mode: Marking automatically by computer control. Contact: 03446349979 (Javaid)