-
loading
Ads with pictures

Knowledge integration project planning


Top sales list knowledge integration project planning

Buner (Khyber Pakhtunkhwa)
Motorized vehicle consisting of four wheels and powered by an internal engine. Automobiles are used to transport people and items from one location to another location. After years or various designs, inventors were able to develop a functional general design that is utilized by major automakers as the foundation of their designs. Automobiles generally use gasoline to fuel the internal engine, but technological advances have led to the design of cars that run on electricity and even water. The automotive industry is a wide range of companies and organizations involved in the design, development, manufacturing, marketing, and selling of motor vehicles, some of them are called automakers. It is one of the world's most important economic sectors by revenue. The automotive industry does not include industries dedicated to the maintenance of automobiles following delivery to the end-user, such as automobile repair shops and motor fuel filling stations. EFI Electrician Diploma Course Content: Monitor Environmental And Sustainability Best Practice In The Automotive Mechanical Industry Apply Safe Working Practices In An Automotive Workplace Use And Maintain Automotive Electrical Test Equipment Carry Out Soldering Of Electrical Wiring And Circuits Demonstrate Knowledge Of Automotive Electrical Circuits And Wiring Systems Install, Test And Repair Vehicle Lighting And Wiring Systems Fabricate, Test And Repair Wiring Harnesses And Looms Test And Repair Basic Electrical Circuits Demonstrate Knowledge Of Petrol And Diesel Engine Operation Diagnose And Repair Electronic Spark Ignition Engine Management Systems Diagnose And Repair Electronic Compression Ignition Engine Management Systems Test, Charge And Replace Batteries Install Ancillary Electronic Control Unit Systems And Components Diagnose And Repair Instruments And Warning Systems Diagnose and repair charging systems Diagnose And Repair Ignition Systems Repair Electrical Systems Service And Repair Electronic Body Management Systems Service And Repair Electronic Drive Management Systems Carry Out Diagnostic Procedures Remove And Replace Supplementary Restraint Systems This course covers the knowledge, skills and attitude required to service and repair electronic controlled fuel injection system and their associated components for both diesel and gasoline engine. An Auto Electrician identifies, maintains, and repairs electrical faults and computer-controlled systems used in automotive technology. These skills can be applied on common vehicles such as cars (light vehicle) and trucks but also extend to include larger vehicles used in construction, mining, and agriculture. Toward the beginning of their time in EFI, students will define a project idea which they will develop and refine throughout their studies, and which will culminate in the completion of the final 40-credit project. This Knowledge Integration and Project Planning course provides a framework through which students can develop their project ideas and their project plan. http://www.icollegete.com/ International College of Technical Education. Main office: Office No. 27, Second Floor, Maryam Shadi Hall Plaza (Airies Plaza), Shamsabad, Murree Road, Rawalpindi, Pakistan 46,000. Email: info@icollegete.com Contact: 051-6122937, 0311-5193625, 0092-335-4176949 http://www.icollegete.com/course/efi-auto-electrician-course-in-rawalpindi-pakistan/
Rs 123
See product
Gujranwala (Punjab)
A motor vehicle consisting of four wheels and powered by an internal engine. Automobiles are used to transport people and things from one place to another. After years or different designs, the inventors were able to develop a workable general design that is used by major car manufacturers as the basis of their designs. Automobiles generally use gasoline to power an internal engine, but technological advances have led to the design of automobiles that run on electricity and even water. The automotive industry is a wide variety of companies and organizations engaged in the design, development, production, marketing and sale of motor vehicles, some of which are called automobile companies. It is one of the world's most important economic sectors in terms of income. The automotive industry does not include industries focused on the maintenance of automobiles after delivery to the end user, such as garages and fuel filling stations. Contents of the EFI Electrician course: Follow environmental and sustainability best practices in the automotive engineering industry Apply safe work practices in the automotive workplace Use and maintain automotive electrical test equipment Solder electrical wiring and circuits Demonstrate knowledge of automotive electrical circuits and wiring systems Install, test and repair vehicle lighting and wiring systems Make, test and repair harnesses and looms Test and repair basic electrical circuits Demonstrate knowledge of gasoline and diesel engine operation Diagnostics and repair of gasoline engine electronic control systems Diagnose and repair electronic compression ignition engine control systems Test, charge and replace batteries Install systems and components of additional electronic control units Diagnostics and repair of devices and warning systems Diagnostics and repairs of charging systems Diagnostics and repair of ignition systems Repairs of electrical systems Service and repair of electronic body control systems Service and repair of electronic drive control systems Perform diagnostic procedures Remove and replace supplemental restraint systems This course covers the knowledge, skills and attitudes required for service and repair electronically controlled fuel injection system and their associated components for both diesel and gasoline engine. An auto electrician identifies, maintains, and repairs electrical faults and computer-controlled systems used in automotive technology. These skills can be applied to common vehicles such as cars (light vehicles) and trucks, but can also be extended to larger vehicles used in construction, mining and agriculture. At the beginning of their time at EFI, students define a project idea that they will develop and refine throughout their studies, culminating in the completion of a final 40 credit project. This Knowledge Integration and Project Planning course provides a framework through which students can develop their project ideas and project plan. http://www.icollegete.com/ International College of Technical Education. Main office: Office No. 27, Second Floor, Maryam Shadi Hall Plaza (Airies Plaza), Shamsabad, Murree Road, Rawalpindi, Pakistan 46,000. Email: info@icollegete.com Contact: 051-6122937, 0311-5193625, 0092-335-4176949 http://www.icollegete.com/course/efi-auto-electrician-course-in-rawalpindi-pakistan/
Rs 123
See product
Sialkot (Punjab)
Students are taught how to connect electrical and electronic devices to installations at the school, as well as the many types and applications of the tools and equipment used to Create and install the necessary electrical and network infrastructure. Together with theoretical explanations of these steps, the students will also receive instructions on how to set up and connect electrical and electronic equipment on the installations. In the auto electrician course offered by United College, you might learn about words like ECU and CPU as well as what system sensors are and how they operate. At our college, you’ll study encoders, how they work, the Hall effect, knock sensors, and the function of speed sensors. This place offers the best and most comprehensive training for car electricians. Your great and extensive education will ensure that you are well-equipped for this attractive position. Without a doubt, the practice session is the most important part of this training. The practice can be finished at a merchant that works with United College even if it is not included in the course cost. The textbook, the final exams, and an official certificate are all included in the course fee. EFI Auto Electrician Course Outline Here is an example of a bulleted course plan for electronic fuel injection (EFI) auto electrician. introduction to the EFI system components understanding engine management systems EFI system diagnostic instruments and apparatus interpreting and analyzing wiring diagrams and schematics identifying and resolving common EFI system problems knowing how fuel injection and management systems work Understanding ignition systems and spark management Knowing the sensors and actuators utilized in EFI systems programming and understanding computer-controlled systems advanced EFI system diagnostic methods upkeep and repair of EFI systems precautions and safety measures while working with EFI systems introduction to electric and hybrid car technologies (optional) Practical experience with EFI systems and diagnostic equipment An Auto Electrician identifies, maintains, and repairs electrical faults and computer-controlled systems used in automotive technology. These skills can be applied on common vehicles such as cars (light vehicle) and trucks but also extend to include larger vehicles used in construction, mining, and agriculture. During their period of study in EFI, students will have the ability to develop their understanding of enquiry methodologies in four main ways: 1) through the EFI shared core, focusing on data skills, interdisciplinary enquiry and creative methods; 2) through elements within each individual programme which engage with domain-specific methods and knowledges; 3) through non-EFI credit-bearing courses which students choose to take on an elective basis, for example courses within the School of Social and Political Science Research Training Centre and the MSc Data Science, Technology and Innovation; 4) not-for-credit training from the Institute for Academic Development, events hosted by the Centre for Data, Culture and Society, free open courses and others. Students will be strongly encouraged to take advantage of these, and to use the Knowledge Integration and Project Planning course to bring together the various insights and understandings they introduce. http://www.icollegete.com/ International College of Technical Education. Main office: Office No. 27, Second Floor, Maryam Shadi Hall Plaza (Airies Plaza), Shamsabad, Murree Road, Rawalpindi, Pakistan 46,000. Email: info@icollegete.com Contact: 051-6122937, 0311-5193625, 0092-335-4176949 http://www.icollegete.com/course/efi-auto-electrician-course-in-rawalpindi-pakistan/
Rs 123
See product
Rawalpindi (Punjab)
ICTE International College of Technical Education. Head Office : Office # 27, Second Floor, Maryam Shadi Hall Plaza (Airies Plaza), Shamsabad, Murree Road, Rawalpindi, Pakistan 46000. Email : info@icollegete.com Contact : 051-8736681, 0311-5193625, 0092-335-4176949 This Human resource management course will teach you how to effectively coordinate between your ogranisation and its employees. Human Resource Management (HRM) is a field that involves the management and development of a company’s employees (its “human resources”). An HR manager would perform various activities like Recruiting and employee selection, Compensation and benefits, Training, development, and education, Employee and labor relations, and Organizational management and development. Employees are a valuable asset to a company; that’s also why you sometimes hear the term “human capital”. Many aspects of a career in HR are about caring for and helping employees. Overall, human resources involves the care, organization, and management of a company’s employees. In many instances, it can also be called personnel management or talent management by professionals because of the many activities that go into employee personal development. Core Courses and Topics in Human Resource Management: Employee Relations Recruitment and Selection Benefits and Compensation Performance and Reward Training and Development Business Statistics Human Resources Management: Industry Specific I Human Resources Management: Industry Specific II International Management Introduction to Economics Environmental Management Decision Making HRM Techniques Principles of Managerial Accounting International Business Law Legal Context of Employment Relations Project Management Strategic Human Resource Management Human Resource Information Systems Strategic Management Orientation Courses: Communication & Investigation (Comprehensive Resume) Organization Theory (Portfolio) Experiential Learning (Autobiography) Academic Evaluation (Questionnaire) Fundament of Knowledge (Integration Chart) Fundamental Principles I (Philosophy of Education) Professional Evaluation (Self Evaluation Matrix) Development of Graduate Study (Guarantee of an Academic Degree) Research Project in Human Resource Management: Bachelor Thesis Project MBM300 Thesis Proposal MBM302 Bachelor Thesis (5,000 words) Publication: Each Bachelor of Human Resource Management graduate is encouraged to publish their research papers either online in the public domain or through professional journals and periodicals worldwide. https://classads.pk/hrm-human-resource-management-course-in-muzaffarabad-azad-kashmir-2/ https://www.dubaiclassifieds.online/services/advertising-marketing_1 https://baichday.com.pk/hrm-human-resource-management-course-in-hajira-palandri/ https://pk.postadverts.com/create/finish https://www.pk.locanto.asia/post/L/711/1/ https://adsmarkaz.com/hrm-human-resource-management-course-in-muzaffarabad-azad-kashmir-23241 http://fatse.com.pk/services/other-services
Rs 123
See product
Hangu (Khyber Pakhtunkhwa)
Professional Quantity Surveyor Course in Hangu ICTE International College of Technical Education Pvt. Ltd Head Office : Office # 27, Second Floor, Maryam Shadi Hall Plaza (Airies Plaza), Shamsabad, Murree Road, Rawalpindi, Pakistan 46000. Email : info@icollegete.com Contact : 051-6122937, 0311-5193625, 0092-335-4176949 We are Establishing Quantity Surveyor Course In Kpk Peshawar Admission Open Professional Quantity Surveyor Course in Hangu The Quantity Surveyor Training Course is a comprehensive program designed to prepare individuals for successful careers in building cost management. The course covers a wide range of topics and utilizes various teaching methodologies to ensure a well-rounded learning experience. Here's a detailed breakdown of the course: Course Objectives: Thorough Understanding of Building Projects: Learn about the entire lifecycle of building projects, from initial planning to completion. Technical Knowledge and Practical Abilities: Acquire skills for estimating, budgeting, and managing costs effectively. Expertise in Construction Technology and Project Management: Gain knowledge in construction technology, project management, contracts, legal considerations, procurement, and cost control. Stakeholder Roles and Responsibilities: Understand the roles and responsibilities of various stakeholders involved in a building project. Construction Materials and Procedures: Familiarize yourself with construction materials, procedures, and project management fundamentals. Legal and Contractual Aspects: Learn about building rules, zoning laws, contracts, and other legal considerations. Procurement Procedures and Strategies: Explore procurement processes, including supplier assessment, contract negotiation, and subcontractor management. Cost Management Strategies: Develop skills in cost planning, budgeting, monitoring, and control. Course Content: Introduction to Quantity Surveying: Overview of the field, its importance, and key responsibilities. Construction Technology: Understanding the technological aspects of construction. Building Materials: In-depth knowledge of materials used in construction. Cost Estimating and Budgeting: Techniques for accurate cost estimation and budget creation. Bills of Quantities: Creating and understanding bills of quantities. Procurement and Contract Management: Strategies for effective procurement and contract management. Construction Law and Regulations: Understanding legal aspects related to construction projects. Professional Quantity Surveyor Course in Hangu Construction Project Management: Managing construction projects efficiently . Cost Control and Monitoring: Implementing strategies to control and monitor costs. Project Scheduling and Planning: Techniques for scheduling and planning construction projects. Risk Management: Identifying and mitigating risks in construction projects. Sustainability in Construction: Integrating sustainable practices into building projects. BIM for Quantity Surveying: Building Information Modeling: Introduction to BIM and its application in quantity surveying. Quantity Surveying Software Applications: Hands-on experience with relevant software tools. Teaching Methodology: Lectures: Theoretical instruction to provide foundational knowledge. Hands-on Activities: Practical application of learned concepts. Case Studies: Analyzing real-world scenarios to enhance problem-solving skills. Group Projects: Collaborative projects for practical experience. Guest Lectures: Industry specialists share insights into current trends and best practices. Career Opportunities: Upon completion, graduates can pursue roles such as: Quantity Surveyors Cost Engineers Estimators Project Managers Construction Managers The construction sector's increasing demand for qualified professionals offers diverse and rewarding career prospects globally. Conclusion: The Quantity Surveyor Training Course aims to build a strong foundation for a successful career in building cost management, addressing the dynamic challenges of the construction industry. Professional Quantity Surveyor Course in Hangu https://www.icollegete.com/course/quantity-surveyor-course-in-rawalpindi/ https://www.icollegete.com/one-year-diploma-in-quantity-surveyor-rawalpindi-islamabad-pakistan/ https://ictepakistan.com/
Rs 123
See product

3 photos

Bagh (Azad Kashmir)
ICTE International College of Technical Education. Head Office : Office # 27, Second Floor, Maryam Shadi Hall Plaza (Airies Plaza), Shamsabad, Murree Road, Rawalpindi, Pakistan 46000. Email : info@icollegete.com Contact : 051-8736681, 0311-5193625, 0092-335-4176949CIVIL SURVEYOR COURSE IN RAWALPINDI SIALKOT SAHIWAL MULTAN LAHORE CHAKWAL HARIPUR ABBOTABAD MARDAN MINGORA NOSHEHRA MUZFFARABAD HAJIRA PALANDRI MIRPUR RAWALAKOT This course is designed to train surveyor-level personnel. The main purpose of this course is not only to impart theoretical knowledge. It also provides students with comprehensive practical knowledge of basic and advanced technical concepts in surveying and cartography. Civil surveyors are involved in all stages of a project, from initial concept through design, construction, and monitoring the condition and performance of the completed structure. In this profession, you can choose whether you want to work in commercial management (quantitative surveying) or geodata engineering. This course program includes extensive hands-on experience in measuring distances, heights and angles from one point to another using electronic and optical instruments and related , students actually use state-of-the-art equipment such as the Light Auto Level and experience working. GPS, laser. Surveying, or land surveying, is the art, profession, and science of determining the ground or three-dimensional position of points and the distances and angles between them. A land surveyor is called a land surveyor. These points are usually on the surface of the Earth, and they are often used to establish maps and boundaries for ownership, locations, such as building corners or the surface location of subsurface features, or other purposes required by government or civil law, such as property sales.Surveying has been an element in the development of the human environment since the beginning of recorded history. The planning and execution of most forms of construction require it. It is also used in transport, communications, mapping, and the definition of legal boundaries for land ownership. It is an important tool for research in many other scientific disciplines.In our program, students will learn surveying and drafting techniques, along with design and construction practices that involve sewer, water, streets, roads, and land surveying. Graduates will be skilled in modern surveying equipment, computer applications, computer-aided drafting and design, and surveying methods.As an essential part of city, county, state, and federal infrastructure, you can put a Land Surveying and Civil Engineering degree to work for government agencies like the MN Department of Transportation, Department of Natural Resources, counties, and larger cities.Surveying involves activities such as mapping the earth above and below sea level; determining the position of the boundaries of public or private land including national and international boundaries; providing geospatial information necessary for the construction of private and public works; designing, establishing and administering of land and geographic information systems (LIS/GIS) and the integration of the data within those systems; positioning and monitoring of physical features, structures and engineering works; planning, development and re-development of property whether urban or rural; determining facts about the size, shape and gravity field of the earth; conducting hydrographic surveys for marine and coastal infrastructure development; and conducting high precision measurements for worldwide control networks and for industrial applications and scientific studies. Surveyors use a variety of techniques and equipment in their work. Some devices are terrestrial, while others are aircraft and space-based devices.
Rs 123
See product
Rawalpindi (Punjab)
Quantity Surveyor Course in Khannapul Rawat Professional Quatity Surveyor Course In Murree ICTE International College of Technical Education Pvt. Ltd Head Office : Office # 27, Second Floor, Maryam Shadi Hall Plaza (Airies Plaza), Shamsabad, Murree Road, Rawalpindi, Pakistan 46000. Email : info@icollegete.com Contact : 051-6122937, 0311-5193625, 0092-335-4176949 This comprehensive Quantity Surveyor Training Course appears to provide a well-rounded and thorough education in building cost management. The course objectives, content breakdown, and teaching methodologies are well-structured to equip individuals with the necessary skills and knowledge for successful careers in the construction industry. Professional Quatity Surveyor Course In Murree Quantity Surveyor Course in Khannapul Rawat Course Objectives: Thorough Understanding of Building Projects: Essential for participants to grasp the entire lifecycle of building projects, ensuring a holistic perspective. Technical Knowledge and Practical Abilities: Equipping individuals with the skills for accurate estimation, budgeting, and effective cost management. Expertise in Construction Technology and Project Management: Providing knowledge in construction technology, project management, contracts, legal considerations, procurement, and cost control. Stakeholder Roles and Responsibilities: Understanding the diverse roles and responsibilities of stakeholders involved in building projects. Construction Materials and Procedures: Familiarizing participants with construction materials, procedures, and project management fundamentals. Legal and Contractual Aspects: Covering building rules, zoning laws, contracts, and other legal considerations relevant to construction. Procurement Procedures and Strategies: Exploring procurement processes, supplier assessment, contract negotiation, and subcontractor management. Cost Management Strategies: Developing skills in cost planning, budgeting, monitoring, and control. Course Content: Introduction to Quantity Surveying: Providing an overview of the field, emphasizing its importance and key responsibilities. Construction Technology: Delving into the technological aspects of construction. Professional Quatity Surveyor Course In Murree Quantity Surveyor Course in Khannapul Rawat Building Materials: Offering in-depth knowledge of materials used in construction. Cost Estimating and Budgeting: Teaching techniques for accurate cost estimation and budget creation. Bills of Quantities: Focusing on creating and understanding bills of quantities. Procurement and Contract Management: Addressing strategies for effective procurement and contract management. Construction Law and Regulations: Ensuring an understanding of legal aspects related to construction projects. Construction Project Management: Teaching efficient management of construction projects. Cost Control and Monitoring: Implementing strategies to control and monitor costs. Project Scheduling and Planning: Providing techniques for scheduling and planning construction projects. Risk Management: Identifying and mitigating risks in construction projects. Sustainability in Construction: Integrating sustainable practices into building projects. BIM for Quantity Surveying: Building Information Modeling: Introduction to BIM and its application in quantity surveying. Quantity Surveying Software Applications: Offering hands-on experience with relevant software tools. Teaching Methodology: The varied teaching methodologies, including lectures, hands-on activities, case studies, group projects, and guest lectures, ensure a diverse and engaging learning experience. This approach helps participants not only understand theoretical concepts but also apply them in practical scenarios. Career Opportunities: The course adequately prepares graduates for a range of roles in the construction industry, such as Quantity Surveyors, Cost Engineers, Estimators, Project Managers, and Construction Managers. The mention of the increasing demand for qualified professionals in the construction sector emphasizes the potential for diverse and rewarding global career prospects. Conclusion: The Quantity Surveyor Training Course's conclusion emphasizes its goal to build a strong foundation for successful careers in building cost management. By addressing the dynamic challenges of the construction industry, the course aims to produce well-equipped professionals capable of contributing effectively to the field. Professional Quatity Surveyor Course In Murree Quantity Surveyor Course in Khannapul Rawat https://www.icollegete.com/course/quantity-surveyor-course-in-rawalpindi/ https://www.icollegete.com/one-year-diploma-in-quantity-surveyor-rawalpindi-islamabad-pakistan/ https://ictepakistan.com/
Rs 123
See product
Abbottabad (Khyber Pakhtunkhwa)
ICTE International College of Technical Education. Head Office : Office # 27, Second Floor, Maryam Shadi Hall Plaza (Airies Plaza), Shamsabad, Murree Road, Rawalpindi, Pakistan 46000. Email : info@icollegete.com Contact : 051-8736681, 0311-5193625, 0092-335-4176949CIVIL SURVEYOR COURSE IN RAWALPINDI SIALKOT SAHIWAL MULTAN LAHORE CHAKWAL HARIPUR ABBOTABAD MARDAN MINGORA NOSHEHRA MUZFFARABAD HAJIRA PALANDRI MIRPUR RAWALAKOT The course is designed to produce Survey Technician level Personnel. The main objectives of this course is to provide, not only theoretical knowledge. but in depth practical skill to students about basic and advanced technological concepts of Surveying and Mapping.Civil Engineering Surveyors are involved in every stage of the project from initial concept through design and construction, to monitoring the condition and performance of the completed structure. Within this profession you could choose to work within Commercial Management (Quantity Surveying) or Geospatial Engineering.This course program includes extensive field practice in the use of electronic and optical instruments used for measuring distance, elevations and angles from one point to another.In this context, our students experience live work on latest equipment such as lite auto level GPS, total station electronics laserSurveying or land surveying is the technique, profession, and science of determining the terrestrial or three-dimensional positions of points and the distances and angles between them. A land surveying professional is called a land surveyor. These points are usually on the surface of the Earth, and they are often used to establish maps and boundaries for ownership, locations, such as building corners or the surface location of subsurface features, or other purposes required by government or civil law, such as property sales.Surveying has been an element in the development of the human environment since the beginning of recorded history. The planning and execution of most forms of construction require it. It is also used in transport, communications, mapping, and the definition of legal boundaries for land ownership. It is an important tool for research in many other scientific disciplines.In our program, students will learn surveying and drafting techniques, along with design and construction practices that involve sewer, water, streets, roads, and land surveying. Graduates will be skilled in modern surveying equipment, computer applications, computer-aided drafting and design, and surveying methods.As an essential part of city, county, state, and federal infrastructure, you can put a Land Surveying and Civil Engineering degree to work for government agencies like the MN Department of Transportation, Department of Natural Resources, counties, and larger cities.Surveying involves activities such as mapping the earth above and below sea level; determining the position of the boundaries of public or private land including national and international boundaries; providing geospatial information necessary for the construction of private and public works; designing, establishing and administering of land and geographic information systems (LIS/GIS) and the integration of the data within those systems; positioning and monitoring of physical features, structures and engineering works; planning, development and re-development of property whether urban or rural; determining facts about the size, shape and gravity field of the earth; conducting hydrographic surveys for marine and coastal infrastructure development; and conducting high precision measurements for worldwide control networks and for industrial applications and scientific studies. The surveyor utilizes a wide variety of techniques and equipment on the job. Some of the equipment is terrestrial-based, other equipment is air- and space-borne.
Rs 123
See product
Bhimber (Azad Kashmir)
CCtv Installation Best Course In Bhimber AJK #Best CCTv Technician Course #2023 Admission open The Complete CCTV Installation Course What you will learn in this CCTV installation training course, is an Introduction to CCTV Systems, Planning & Design, Cabling, Power Supplies, CCTV Installation, DVR, NVR, and Networking for CCTV. CCtv Installation Best Course In Bhimber AJK Course discription CCTV cameras play a significant role in ensuring the safety of premises. It is quite common for us to come across them at schools, colleges, shops, ATMs, banks, offices, factories, and homes. But it is not a simple task unless you undertake a CCTV installation course before getting into the profession. International College of Technicial Education provides an opportunity for young aspirants to pursue their career as CCTV technicians after doing CCTV short course at the institute. In this age of digital innovation, the role of a CCTV professional is no longer confined to mere video monitoring. It extends far beyond, into the intricacies of IP networks and security, creating a blend of skills that are in high demand across industries. This is where International College of Technical Education Diploma in CCTV steps in, offering a comprehensive and practical curriculum that transforms students into adept professionals ready to tackle the challenges of the modern world. Diploma in CCTV Course Topics Basic Networking Introduction to Networks Network Topologies OSI Layer Model Internet Protocols IP Addressing Network Security CCTV – IP System Introduction to CCTV Systems Camera Selection and Design Analog & IP Cameras Digital Video Recorder (DVR) DVR Configuration and Troubleshooting Networking for CCTV Mobile Access CCtv Installation Best Course In Bhimber AJK This complete CCTV installation training course offers a superb blend of ‘need to know’ classroom theory and ‘hands-on’ practical experience. Over the 5 day CCTV training course, you will leave with the necessary knowledge and skills to work effectively in the electronic security and video surveillance sector. CCTV Camera Course Outline Introduction to CCTV CCTV Tools & spares for cables & connectors Tools for CCTV installation Network ADAPTER, DETAIL, Introduction to DVR, Introduction to Access management and group building Corporate Responsibility Project Administration Performance Administration After completing the CCTV installation course, a candidate will be able to identify different types of cameras, work with coaxial cable, set up IP and Network, set up relevant video recording software and device. From learning about cabling to the latest HD analogue and IP integration techniques, this practical course is the perfect option if you want a career in the exciting world of CCTV installation. This is a vocational training program. The main aim of the CCTV short course is to impart skills to students. As part of this program, students are trained in areas such as – CCTV hardware, software, installation, maintenance and operation. Technological Proficiency: Navigate the complexities of IP networks, ensuring you can set up and maintain CCTV systems in a digital age. Security Acumen: Grasp the importance of safeguarding these networks, addressing vulnerabilities, and ensuring the integrity of video data. Hands-On Experience: Gain practical expertise in designing, configuring, and troubleshooting CCTV systems and IP networks. Our Diploma in CCTV transcends the traditional boundaries of video surveillance. It equips you with the knowledge and hands-on experience necessary to thrive in an ever-evolving technological landscape. Join us and embark on a journey to master the art of CCTV, opening doors to a world of career opportunities and technological advancements. Course Duration: 2 MONTHS CCtv Installation Best Course In Bhimber AJK https://www.icollegete.com/diploma-in-cctv-technician-rawalpindi-islamabad-pakistan/ https://www.icollegete.com/course/cctv-camera-installation-training-course-in-rawalpindi-pakistan/ Address Detail: ICTE International College of Technical Education Pvt. Ltd Head Office : Office # 27, Second Floor, Maryam Shadi Hall Plaza (Airies Plaza), Shamsabad, Murree Road, Rawalpindi, Pakistan 46000. For registration: Email : info@icollegete.com Contact : 051-6122937, 0311-5193625, 0092-335-4176949 Websities:https://ictepakistan.com/, https://icollegete.com.pk/, https://www.icollegete.com/
Rs 123
See product

2 photos

Pakistan
Job Description This role is responsible for leading a project team in delivering a solution to the customer using the appropriate business measurements and terms and conditions for the project according to the project charter, project agreement or contract. They have overall performance responsibility for managing scope, cost, schedule, and contractual deliverables, which includes applying techniques for planning, tracking, change control, and risk management. They are responsible for managing all project resources, including subcontractors, and for establishing an effective communication plan with the project team and the customer. They provide day to day direction to the project team and regular project status to the customer. The employee focuses on individual/team objectives and development of professional effectiveness. Skills: Environment: Professional knowledge related to incumbent's position, team, and department. Requires ability to absorb professional knowledge quickly and develop skills. Communication/Negotiation: Draw upon professional concepts to collaborate with others to carry out assigned duties. Negotiation is required. Problem Solving: Recognize job-related problems. analyze causes using existing techniques or tools, prepare and recommend solution alternatives. Challenge the validity of given procedures and processes with the intent to enhance and improve. Contribution/Leadership: Works on professional projects;work is often reviewed for developmental purposes. Understand the standard mission of the professional group and vision in own area of competence. May directly influence people in own project. Position may require coordination of activities of less experienced or less knowledgeable team members. Impact on Business/Scope: Accountable for individual or team results. May contribute by supporting activities that are subject to business measurements, impact customer satisfaction, or impact immediate costs or expenses. Pakistan IBM Islamabad, PAK Location: Pakistan Job type: Experience: Vacancies: 1
See product
Ahmadpur East (Punjab)
ICTE International College of Technical Education Pvt. Ltd Head Office : Office # 27, Second Floor, Maryam Shadi Hall Plaza (Airies Plaza), Shamsabad, Murree Road, Rawalpindi, Pakistan 46000. Email : info@icollegete.com Contact : 051-6122937, 0311-5193625, 0092-335-4176949 This course covers Starting with Sketching, Layers, Dimension Styles, Dynamic Blocks and A360. Autodesk AutoCAD is a powerful CAD software helping professionals create 2D drawings faster and with more precision.This course covers the essential core topics for working with the AutoCAD software. The teaching strategy is to start with a few basic tools that enable the student to create and edit a simple drawing, and then continue to develop those tools. More advanced tools are introduced throughout the class. Not every command or option is covered, because the intent is to show the most essential tools and concepts.AutoCAD is an emerging field that combines creativity with technical skills. This course will help a trainee to acquire basic introduction of Computer Aided Design (CAD). AutoCAD is the pioneer software in leaving behind the cumbersome ways of drawing on a sheet/paper by hand to CAD designing with technical approach. This course will help learn this software step by step from beginner to professional level. The goal is to develop planning and designing skills starting with the fundamental theory and practice of AutoCAD and quickly advancing to draw Polylines, fillets, chamfering, gradient, layers and hatching etc. 3D Max introduction and modelling will also be discussed in collaboration with AutoCAD software. This courseware is designed for the new AutoCAD® user who requires comprehensive training in AutoCAD. It incorporates the features, commands, and techniques for creating, editing, and printing drawings with AutoCAD LT.Hands-on exercises throughout the courseware explore how to create 2D production drawings. The primary objective of this courseware is to teach the student the basic commands necessary for professional 2D drawing, design, and drafting using AutoCAD. Upon completion of the course, the student will: • Become familiar with the AutoCAD user interface. • Understand the fundamental concepts and features of AutoCAD. • Use the precision drafting tools in AutoCAD to develop accurate technical drawings. • Present drawings in a detailed and visually impressive manner. • Develop a level of comfort and confidence with AutoCAD through hands-on experience. COURSE OUTLINE Introduction to Autodesk AutoCAD • Starting the Software • User Interface • Working with Commands • Cartesian Workspace • Opening an Existing Drawing File • Saving a Drawing File Basic Drawing & Editing Commands • Drawing Lines • Erasing Objects • Drawing Lines with Polar Tracking • Drawing Rectangles • Drawing Circles • Undo and Redo Actions Projects - Creating a Simple Drawing • Create a Simple Drawing • Create Simple Shapes Drawing Precision in AutoCAD • Using Running Object Snaps • Using Object Snap Overrides • Polar Tracking at Angles • Object Snap Tracking • Drawing with Snap and Grid Making Changes in Your Drawing • Selecting Objects for Editing • Moving Objects • Copying Objects • Rotating Objects • Scaling Objects • Mirroring Objects • Editing with Grips Projects - Making Your Drawings More Precise • Schematic Project: Electronics Diagram • Architectural Project: Landscape • Mechanical Project (with Polar & Tracking) • Mechanical Project: Surge Protector • Mechanical Project: Satellite Organizing Your Drawing with Layers • Creating New Drawings with Templates • What are Layers? • Layer States • Changing an Object’s Layer Advanced Object Types • Drawing Arcs • Drawing Polylines • Editing Polylines • Drawing Polygons • Drawing Ellipses Analysing Model and Object Properties • Working with Object Properties • Measuring Objects Projects - Drawing Organization & Information • Architectural Project • Mechanical Project • Civil Project Advanced Editing Commands • Trimming and Extending Objects • Stretching Objects • Creating Fillets and Chamfers • Offsetting Objects • Creating Arrays of Objects Inserting Blocks • What are Blocks? • Working with Dynamic Blocks • Inserting Blocks • Inserting Blocks using the Tool Palettes • Inserting Blocks using the Design Center • Inserting Blocks using the Content Explorer Projects - Creating More Complex Objects • Mechanical Plate • Architectural Floor Plan Graitec Training Centre Locations Southampton | Milton Keynes | Nottingham | Bradford | Durham *The suggested course duration is a guideline. Course topics and duration may be modified by the instructor based upon the knowledge and skill level of the course participants. Training can either be taken on site or at one of our conveniently located local training centres. The course is Autodesk Authorised with Courseware, and Certificate of Completion awarded Maximum number of delegates: 6 per course To book a place on this course please call Graitec on 023 8086 8947 COURSE OUTLINE Setting Up a Layout • Printing Concepts • Working in Layouts • Creating Layouts • Creating Layout Viewports • Guidelines for Layouts Printing Your Drawing • Printing Layouts • Print and Plot Settings Projects - Preparing to Print • Mechanical Project • Architectural Project Text • Working with Annotations • Adding Text in a Drawing • Modifying Multiline Text • Formatting Multiline Text • Adding Notes with Leaders to Your Drawing • Creating Tables Hatching • Hatching • Editing Hatches Adding Dimensions • Dimensioning Concepts • Adding Linear Dimensions • Adding Radial and Angular Dimensions • Editing Dimensions Projects - Annotating You’re Drawing • Mechanical Project • Architectural Project • Civil Project
Rs 123
See product
Bagh (Azad Kashmir)
ICTE International College of Technical Education Pvt. Ltd Head Office : Office # 27, Second Floor, Maryam Shadi Hall Plaza (Airies Plaza), Shamsabad, Murree Road, Rawalpindi, Pakistan 46000. Email : info@icollegete.com Contact : 051-6122937, 0311-5193625, 0092-335-4176949 This course covers Starting with Sketching, Layers, Dimension Styles, Dynamic Blocks and A360. Autodesk AutoCAD is a powerful CAD software helping professionals create 2D drawings faster and with more precision.This course covers the essential core topics for working with the AutoCAD software. The teaching strategy is to start with a few basic tools that enable the student to create and edit a simple drawing, and then continue to develop those tools. More advanced tools are introduced throughout the class. Not every command or option is covered, because the intent is to show the most essential tools and concepts.AutoCAD is an emerging field that combines creativity with technical skills. This course will help a trainee to acquire basic introduction of Computer Aided Design (CAD). AutoCAD is the pioneer software in leaving behind the cumbersome ways of drawing on a sheet/paper by hand to CAD designing with technical approach. This course will help learn this software step by step from beginner to professional level. The goal is to develop planning and designing skills starting with the fundamental theory and practice of AutoCAD and quickly advancing to draw Polylines, fillets, chamfering, gradient, layers and hatching etc. 3D Max introduction and modelling will also be discussed in collaboration with AutoCAD software. This courseware is designed for the new AutoCAD® user who requires comprehensive training in AutoCAD. It incorporates the features, commands, and techniques for creating, editing, and printing drawings with AutoCAD LT.Hands-on exercises throughout the courseware explore how to create 2D production drawings. The primary objective of this courseware is to teach the student the basic commands necessary for professional 2D drawing, design, and drafting using AutoCAD. Upon completion of the course, the student will: • Become familiar with the AutoCAD user interface. • Understand the fundamental concepts and features of AutoCAD. • Use the precision drafting tools in AutoCAD to develop accurate technical drawings. • Present drawings in a detailed and visually impressive manner. • Develop a level of comfort and confidence with AutoCAD through hands-on experience. COURSE OUTLINE Introduction to Autodesk AutoCAD • Starting the Software • User Interface • Working with Commands • Cartesian Workspace • Opening an Existing Drawing File • Saving a Drawing File Basic Drawing & Editing Commands • Drawing Lines • Erasing Objects • Drawing Lines with Polar Tracking • Drawing Rectangles • Drawing Circles • Undo and Redo Actions Projects - Creating a Simple Drawing • Create a Simple Drawing • Create Simple Shapes Drawing Precision in AutoCAD • Using Running Object Snaps • Using Object Snap Overrides • Polar Tracking at Angles • Object Snap Tracking • Drawing with Snap and Grid Making Changes in Your Drawing • Selecting Objects for Editing • Moving Objects • Copying Objects • Rotating Objects • Scaling Objects • Mirroring Objects • Editing with Grips Projects - Making Your Drawings More Precise • Schematic Project: Electronics Diagram • Architectural Project: Landscape • Mechanical Project (with Polar & Tracking) • Mechanical Project: Surge Protector • Mechanical Project: Satellite Organizing Your Drawing with Layers • Creating New Drawings with Templates • What are Layers? • Layer States • Changing an Object’s Layer Advanced Object Types • Drawing Arcs • Drawing Polylines • Editing Polylines • Drawing Polygons • Drawing Ellipses Analysing Model and Object Properties • Working with Object Properties • Measuring Objects Projects - Drawing Organization & Information • Architectural Project • Mechanical Project • Civil Project Advanced Editing Commands • Trimming and Extending Objects • Stretching Objects • Creating Fillets and Chamfers • Offsetting Objects • Creating Arrays of Objects Inserting Blocks • What are Blocks? • Working with Dynamic Blocks • Inserting Blocks • Inserting Blocks using the Tool Palettes • Inserting Blocks using the Design Center • Inserting Blocks using the Content Explorer Projects - Creating More Complex Objects • Mechanical Plate • Architectural Floor Plan Graitec Training Centre Locations Southampton | Milton Keynes | Nottingham | Bradford | Durham *The suggested course duration is a guideline. Course topics and duration may be modified by the instructor based upon the knowledge and skill level of the course participants. Training can either be taken on site or at one of our conveniently located local training centres. The course is Autodesk Authorised with Courseware, and Certificate of Completion awarded Maximum number of delegates: 6 per course To book a place on this course please call Graitec on 023 8086 8947 COURSE OUTLINE Setting Up a Layout • Printing Concepts • Working in Layouts • Creating Layouts • Creating Layout Viewports • Guidelines for Layouts Printing Your Drawing • Printing Layouts • Print and Plot Settings Projects - Preparing to Print • Mechanical Project • Architectural Project Text • Working with Annotations • Adding Text in a Drawing • Modifying Multiline Text • Formatting Multiline Text • Adding Notes with Leaders to Your Drawing • Creating Tables Hatching • Hatching • Editing Hatches Adding Dimensions • Dimensioning Concepts • Adding Linear Dimensions • Adding Radial and Angular Dimensions • Editing Dimensions Projects - Annotating You’re Drawing • Mechanical Project • Architectural Project • Civil Project
Rs 123
See product
Mirpur (Azad Kashmir)
The Bachelor of Science in Electro-Mechanical Technology (BSEMT) is designed to teach students the theory and application of a broad range of electrical, mechanical, computer, control and instrumentation technologies the students' knowledge and skills in the design, construction, operation and use of robot.Help engineers design, develop, test, and manufacture industrial machinery, consumer products, and other equipment. Assist in product tests — by setting up instrumentation for auto crash tests.This program is designed to prepare students for employment in the field of mechanical design and drafting, with an in-depth course of study in the technological aspects of the design profession.Accurately and efficiently create 2D and 3D production drawings using CAD technology. Use traditional machine tools and computer numerical control technology (CNC) to manufacture production parts following industry standards and safety protocols. Use knowledge of production tools and equipment, mechanical part design, production planning and work flow methods, and quality assurance tools and techniques, to perform design calculations and evaluate and resolve engineering design and manufacturing issues. Create professional technical written documents and effectively communicate technical information to appropriate audiences. Demonstrate professional responsibility: work effectively as a member of a project team; meet deadlines; show respect for coworkers; provide stewardship of resources, equipment and facilities.Mechanical Technology is a hands-on curriculum that provides an in-depth course of study in the technological aspects of the mechanical design profession. Students are exposed to the current technology used in industry and prepared for careers in the field of mechanical design and technology.This course general introduction to engineering materials used in design and manufacturing. Topics include mechanical, physical, and chemical properties of ferrous and non-ferrous metals, plastics, ceramics, glass, and composites. The course will cover material sources, formation and production. Emphasis is on material selection for mechanical design purposes based on material properties and manufacturability. The course will cover different aspects of material testing and field trips to local material testing labs as permitted.Today's engineering and technology fields and the multifaceted role of the technologist will be explored. Orientation to student services, academic policies, stress management, science study skills, time management, and other college survival skills will be presented. Additional topics of study include applied mathematics, use of scientific calculators, teamwork and problem solving skills in the classroom and laboratory, and an introduction to the physical units and dimensions encountered in the technologies.is course is the culmination of the previous and concurrent course required for the Mechanical Technology Program. Students will be assigned a problem and asked to provide a solution. Most of the necessary information will be provided but some may require the students to do some research, such as a search on the internet. The project will incorporate drawing/design, analysis and manufacturing knowledge. The students may be asked to produce a scaled model prototype. The students will present their results in a short presentation to invited faculty, Advisory Board members and other invited guests. Prerequisite: MET 104, MET 205, MAT 152, PHY 119. Co-requisite.
Rs 25
See product

4 photos

Muzaffarabad (Azad Kashmir)
ICTE International College of Technical Education Pvt. Ltd Head Office : Office # 27, Second Floor, Maryam Shadi Hall Plaza (Airies Plaza), Shamsabad, Murree Road, Rawalpindi, Pakistan 46000. Email : info@icollegete.com Contact : 051-6122937, 0311-5193625, 0092-335-4176949 Web designing course in Kashmir Ajk Pakistan #Best#Web designing course in Pallandri #Best#Web designing course in Pallandri Web Site Development Essentials: This section covers the fundamental aspects of web development, including the site development process, understanding customer expectations, and addressing ethical and legal issues in web development. This includes understanding how to plan and execute web projects while considering various stakeholders and legal regulations. Web Design Elements: This part focuses on the design aspects of websites. It covers aesthetics, the user experience, navigation, usability, and accessibility. These are crucial for creating websites that are visually appealing, easy to use, and accessible to a wide range of users. Basic Web Technologies: This includes an introduction to essential web technologies like HTML (Hypertext Markup Language) and its modern variant XHTML. It also involves understanding image files, using GUI site development applications, and learning about site publishing and maintenance. These are the foundational skills for creating and maintaining web pages. Web Site Technologies: This section delves into more advanced web technologies and tools. It mentions using software like Adobe Dreamweaver, Microsoft Expression Web, and Flash for web development. It also touches on technologies such as Cascading Style Sheets (CSS), XML, JavaScript, Java applets, Dynamic HTML, plugins, multimedia integration, and databases. Web Browser Compatibility: Learning about the functionality of different web browsers is crucial. Web designers need to ensure that websites they create work properly and look consistent across various web browsers. Connect Web Design to Business Objectives: Understanding how web design aligns with business objectives is essential. Websites are often created to serve specific purposes for businesses or organizations, and a web designer should be able to connect design choices to these goals. Project Management: Managing web projects is another crucial skill. This involves overseeing the creation of websites, ensuring that they meet the project's goals, staying on schedule, and within budget. Compatibility and Extensibility: Learning about the compatibility issues that may arise when using different design tools and technologies is important. Designers should be able to adapt to changing technologies and understand how to make their websites extensible for future updates. In summary, a Web Design Specialist course covers a wide range of topics, from the fundamentals of web development to advanced design and technology skills. It equips students with the knowledge and tools needed to create effective, functional, and visually appealing websites that meet both technical and business requirements. ICTE International College of Technical Education Pvt. Ltd Head Office : Office # 27, Second Floor, Maryam Shadi Hall Plaza (Airies Plaza), Shamsabad, Murree Road, Rawalpindi, Pakistan 46000. Email : info@icollegete.com Contact : 051-6122937, 0311-5193625, 0092-335-4176949 Web designing course in Kashmir Ajk Pakistan #Best#Web designing course in Pallandri #Best#Web designing course in Pallandri https://www.icollegete.com/course/web-graphic-designing-course-in-rawalpindi-pakistan/
Rs 123
See product
Abbottabad (Khyber Pakhtunkhwa)
ICTE International College of Technical Education. Head Office : Office # 27, Second Floor, Maryam Shadi Hall Plaza (Airies Plaza), Shamsabad, Murree Road, Rawalpindi, Pakistan 46000. Email : info@icollegete.com Contact : 051-6122937, 0311-5193625, 0092-335-4176949 Civil engineering is the application of physical and scientific principles for the design, development and maintenance of both the constructed and the naturally built environment.Civil engineering is the professional practice of designing and developing infrastructure projects. This can be on a huge scale, such as the development of nationwide transport systems or water supply networks, or on a smaller scale, such as the development of individual roads or buildingsAll aspects of building a structure fall under the remit of a civil engineer. This can include planning, design, budgeting, surveying, construction management and analysis, and often civil engineering careers encompass a combination of all these elements.The great thing about civil engineering in the real world is that it’s an industry that perpetually adapts to the demands and desires of society. In recent years civil engineering has adapted to consider many contemporary environmental concerns, helping to address issues of pollution and scarce water supplies, while considering the potential of sustainable energy within the industry.Civil engineering coursesIf you study civil engineering at undergraduate level, you’ll learn to apply mathematics and scientific knowledge (particularly physics) to real-life situations and problems that arise from creating and maintaining structures, taking into account environmental, financial, legal and ethical considerations. At its core, civil engineering is a combination of many scientific specialisms, including mechanics, hydraulics, geotechnics (using knowledge of the earth’s crust to solve construction problems), materials science and statistical analysis. As such, study of these foundational elements will feature heavily in the early years of civil engineering degrees. As well as the more scientific side, those who study civil engineering will get to develop their design skills, particularly computer-aided design. Project work is central to the subject, meaning that in the latter years of your degree you will be able to complete your own design projects individually or within a teamUndergraduate civil engineering degrees will typically be three or four years in length and will feature a mixture of lectures and lab work. There will also be an emphasis on working within a team, as this is considered a key skill for anyone pursuing civil engineering careers.Those who study civil engineering may also have opportunities to participate in field trips and complete industry placements, either as a ‘year in industry’ or for shorter periods.Civil Engineering is concerned with the planning, design, construction and maintenance of the built environment. It encompasses minor and major structures, ranging from drainage systems, houses, commercial buildings, roads and bridges to multi-story buildings and water and wastewater treatment facilities. The work of civil engineers is most visible in the structures in which we live and work. Their contribution is also seen in transportation systems that we use on a daily basis such as subways, motorways, railways, airports and harbours. They are also involved in the design, construction and operation of complex water supply and sanitation systems for our ever-growing cities. In such projects and more generally, they perform a critical public and environmental health function as well.The Civil Engineering degree programme sets out to develop the scientific, technical, organisational, IT and communication skills needed for a satisfying and rewarding career as a Civil Engineer. Civil Engineers work in rapidly changing and challenging areas using traditional and new materials and techniques, and increasingly incorporating IT solutions at design and construction stage. You could be involved in schemes from design to management stage through to completion in what are often highly complex projects. Therefore, the profession combines creative skills with an aptitude for mathematics and technical subjects. At the most challenging end of the profession, where the management of large projects is involved, a high degree of administration skills are also required.
Rs 123
See product

Free Classified ads - buy and sell cheap items in Pakistan | CLASF - copyright ©2024 www.clasf.pk.