Jack male color black red

  Specifications Color black Device iPhone/iPad/iPod, Samsung Galaxy™, LG™, HTC™, Sony™, Other devices Impedance 18 Ω Frequency response (microphone) 100 – 10,000 Hz Frequency response (headphones) 15Hz - 22000Hz Sound pressure level (SPL) 118 dB (1kHz/1Vrms) THD, total harmonic distortion Jack plug 3.5 mm angled Cable length 1.3 m Weight 16 g Pick-up pattern Omni-Directional Microphone sensitivity - 44 dB V/Pa    

Features: Brand new and high quality. Standard Sub-D VGA Input. It will work with laptops and desktops with VGA cards that has TV-Out function capability through the VGA connector. VGA connector on one end and both RCA jack Video (TV) out and S-Video out connectors on the other end. Connector: D-Sub high density 15 pin male to S-Video mini din 4 pin female and RCA jack. Color: Black Package Content: 1 x VGA SVGA to S-VIDEO 3 RCA TV AV Converter Cable Adapter

Features:1.USB 2.0 Male connector is for USB device,and also for Power charge.2.USB 2.0 Female is for power and data3.Keeps you from having to carry multiple cables to accommodate different types of USB devices4.Color:Black.Kindly note the two USB female can charging together, however thetwo USB female can not data transfer together, can transfer one only.Package Included:1 x USB Cable

Reliable and fast data transfer. With this cable, you can connect your power bank to router. Thus, when power cut, you can use your power bank to supply your router! Internet blackout solve baby, continuous Artifact Use mobile power,charg treasure or notebook usb interface Drive after a power outage or optical router cat online Via computer USB jack to power other devices. Such as: USB lights, USB fan, Cartoon watches, radiator, 5V mini speakers, USB HUB, etc. Interface: USB transfer DC5.5 * 2.1MM(2.5MM) Input voltage: DC 5V Output voltage: DC 9V and 12V Max Color: Black Material: ABS Output current: For 800mA or less application is recommended Package includes: 1 X Conversion Line Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

* DC Power Cable with pin and magnetic ring, Anti-interference * DC interface: USD Square with pin inside (Male) * Cable: Outside diameter 4.0mm, copper wire 42/0.12mm, 0.5mm * Cable length: 1.5m/5ft * Material:plastic * Color: Black

Features: Passive PoE- means that input and output voltage are equal. Transforms Non PoE devices to PoE enabled. Supports 5V, 12V, 24V, 48V. Power supply required for power input - simply use the power supply (wall transformer) that is provided with the device you are trying to power. PoE injector and splitter kit with 5.5 * 2.1 mm DC jack / plug. Use with IP security camera, wireless access point and other devices. Can work up to30-40 metres/100-130ft (depending on the quality of the cable and the power draw of the device). Specifications: Color: Black, White(Optional) Material: Plastic Injector: RJ45 Male + Power In to RJ45 Female Splitter: RJ45 Female to RJ45 Male + Power Out Supports: 5V, 12V, 24V, 48V Power plug / jack: 2.1 * 5.5mm / 0.9 * 2.2in Power Pins: 4,5 + and 7,8 Length:18cm / 6.9in Transmission distance: 30-40 m / 100-130 ft Application: WLAN, routers, switches, internet telephony, security monitoring etc Product size: 17.5 * 1.9 * 1.8cm / 6.8 * 0.7 * 0.7in Product weight: 53g / 1.86oz Package size: 22.3 * 9 * 2.2cm / 8.8 * 3.5 * 0.9in Package weight: 54g / 1.9oz

Specification: Material: ABS Net Weight: 58g Size (L x W x T): 93 x 48 x 17mm RF signal detector antenna length: 180mm Receiving Range: 1MHz - 6500 MHz Probe Laser Wavelength: 920nm Operating Current: 8mA Built-in rechargeable: 280mAh Radio Detection of camera range: 5cm -10m (according to power) Laser Detection camera: from 10cm - 10m Color: Black Highlights: Detects wireless signals (used by spy devices) around you Combined Laser scanning and radio frequency sweep Detect and locate any wired, wireless hidden camera and RF device with working frequency between 1MHz - 6.5 GHz Special LED + camera lens detector window allows you to sweep areas for regular security cameras and hidden pinhole cameras (camera lens produces a red reflective spot through the red detector window) Great for spotting cell phone / GPS spy devices, signal blockers, and other wireless surveillance devices Multi-function warning: Laser Light, vibration, Sound, LED display, Earphone Adjustable sensitive step Built-in Compass especially for professional users Low power indication Comes with 2.5mm jack earphones+100V~240V AC charger + English User Manual Note: Correct plug type or adapter will be sent according to your shipping country. What's in the box?

Specification: Material: ABS Net Weight: 58g Size (L x W x T): 93 x 48 x 17mm RF signal detector antenna length: 180mm Receiving Range: 1MHz - 6500 MHz Probe Laser Wavelength: 920nm Operating Current: 8mA Built-in rechargeable: 280mAh Radio Detection of camera range: 5cm -10m (according to power) Laser Detection camera: from 10cm - 10m Color: Black Highlights: Combined Laser scanning and radio frequency sweep Detect and locate any wired, wireless hidden camera and RF device with working frequency between 1MHz - 6.5 GHz Special LED + camera lens detector window allows you to sweep areas for regular security cameras and hidden pinhole cameras (camera lens produces a red reflective spot through the red detector window) Great for spotting cell phone / GPS spy devices, signal blockers, and other wireless surveillance devices Multi-function warning: Laser Light, vibration, Sound, LED display, Earphone Adjustable sensitive step Built-in Compass especially for professional users Low power indication Comes with 2.5mm jack earphones+100V~240V AC charger + English User Manual Note: Correct plug type or adapter will be sent according to your shipping country. What's in the box?

Audio Dual 3.5 Plug Design Perfect for compatible audio equipment. Compact portable design, ready to enjoy music. Compatibility: Works with headsets that have 3.5 mm stereo plug. Connector Female: One 3.5mm TRRS. Connector Male: Two 3.5mm TRS (One for L/R Audio & One for Microphone). Gold Plated for Better Sound Quality. Color: Black. Cable length: 19cm Wire core material: bare copper wire. Two Male Ports One Socket for Headphone Jack on your PC, Laptop, Gaming.. Works with all PC Applications - Skype, MSN Mesenger, Yahoo, Google Voice etc.

k530 60% keyboard   First Redragon 60% Keyboard –  Ultra minimalistic tenkeyless (TKL) design with 61 keys portable layout frees up table space for mouse movement, which offers the purest performance for FPS pro. Enjoy the Freedom of Wireless –  With an advanced 5.0 bluetooth chip and 2400 mAh long-lasting battery capacity, you can connect your keyboard to your PC, tablet and even cell phone at the same time without cables. Enjoy working and gaming on a wireless connection that’s both reliable and fast. Hassle-Free Dual Modes Switch –  We know some gamers concern about the wireless lag too, even it’s just self-psychological insecurity. There offers a wireless/wired mode switch on the side of the keyboard for your plan B choice. RGB Illumination Builder –  Dynamic 13 preset illumination modes are free to choose by the keyboard itself. Millions of color options and reactive typing effects make you the designer of your ultimate gear with pro driver. Balanced Brown Switch –  Tactile but not clicky brown switches guaranteed for 50 million keypresses, brown switches have a soft tactile feel, so you can gently feel when an input is made and leaves lower noise while in office. Redragon K530 Draconic 60% Compact RGB Wireless Mechanical Keyboard The Unseen Blade is the Deadliest Meet the FIRST generation of Redragon wireless keyboard designed for users who demand precise and pro-grade gaming and typing performance. All Needs are Covered Whatever wired, wireless, PC or cell phone, all of it will be taken good care with K530, easy to cutover through them by side switches. Pro Keyboard with Pro Driver Download it and use it to have a totally different user experience, endless typing and backlighting are waiting for you — the show-maker. No Worries about the Connection With unique detailed designed “L” type-c cable, the keyboard jack part will be Superior stable with any movements.   TECH SPECS Keyboard Weight:  0.8 Kg Keyboard Dimensions: 291.7*101.7*36 mm Key Switches: Redragon Mechanical Brown Switches USB Connector: Detachable Type-C Cable Keyboard Connectivity: Wired/Wireless (Bluetooth v5.0) Matrix: 61 Keys (Full Rollover) Height Adjustable: Yes   Package List: 1 x Redragon K530 Wireless Keyboard 2 x Switch Puller 1 x Switch Backup Box (4 Switches with Black/Red/Brown/Blue) 1 x User manual  

Highlights: Style: Headband Communication: Wireless Connectors: None Wireless Type: Bluetooth Vocalism Principle: Dynamic Control Button: Yes Volume Control: Yes Active Noise-Cancellation: Yes Function: For Mobile Phone, for Video Game, HiFi Headphone, For iPod, Sports, Common Headphone Plug Type: Wireless Sensitivity: 93±3dB Frequency Response Range: 20-20000 Hz Line Length: None Resistance: 56Ω Waterproof: No Support Memory Card: Yes Support APP: Yes Is wireless: Yes With Microphone: Yes Codecs: Apt-X Package Weight: 0.232kg (0.51lb) Talk time: 6 hours Noise reduction technology: Noise reduction technology Product Description: The Multifunctional headphone combines the Bluetooth, Card MP3 player and FM Radio function, and supports hands-free function. With this product, you greatly enjoy the wonderful wireless music, listen to FM radio, and it also can be worked as a MP3 Player because it supports Memory card (MicroSD / TF card). Moreover, don’t worry, if your music players (Such as, MP3 / MP4, etc) have no Bluetooth function, you can connect the music players to the headset via the included 3.5mm audio cable to enjoy your favorite music. 4 in 1 Multifunctional stereo Bluetooth Headphone: Wireless Stereo Bluetooth + Card MP3 player + FM Radio + Wired Headset function. 3.5mm audio jack, provides a simple wired connection of a variety of music players (Such as, MP3 / MP4, etc) without Bluetooth function.Easy to pair with almost any Bluetooth-enabled audio / music players devices, such as, Smart Phones, Tablet PC, Laptop, NoteBook, etc. Be designed with two High-grade speaker and has built-in Mic,,powerful bass system, bring you superior sound effect. Best choice for listening to music / FM Radio, watching movie, chatting online, etc. Supports hands-free function, conveniently answer the incoming call during travel. Type: Stereo headphone with Mic Bluetooth version: 4.1 Operation Distance: 10m Plug Type: 3.5mm Color: Green, Red, Black, White, Blue

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 128V Audio DSP Mixer with express shipping all over Pakistan.   The CONVERGE Pro 2 128V Audio DSP Mixer from ClearOne is a complete conferencing solution with 12 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in VoIP interface for 2 lines. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection. The mixer comes with built-in VoIP for VoIP conferencing. The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.   Features: Architecture • 12 mic/line inputs with AEC •  Built-in VoIP for 2 lines •  Built-in USB for PC-based conferencing Scalable Connectivity •  Standalone and daisy-chained system •  Stack up units up to 96 mic/line inputs •  Expansion bus C-Link with 64 channels •  P-Link bus to connect 6 peripherals Configuration & Management •  CONSOLE software •  Auto-discovery of devices •  Matrix View for entire system •  FlowView for visualized audio signal paths •  System monitoring and troubleshooting Audio Signal Processing •  Acoustic Echo Cancellation processing •  Distributed Echo Cancellation on every mic input •  Noise cancellation with Adaptive-Ambience •  Acoustic Intelligence with faster convergence •  DARE feedback elimination •  Microphone gating Flexible Control Options •  Dialer app for Windows, Mac, iOS, and Android •  Tabletop controller with a touch panel •  Wall controller with buttons •  Web-based controller Supports 3rd-party control modules   Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) VoIP Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation Audio: 5 lines (2 default + 3 lines through license), each line supporting 1+5 calls Sample Rate: 24 kHz Sample Bit Depth: 24-bit Codec: G.711 uLaw, G.711 ALaw, G.722 Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: Proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 48T Audio DSP Mixer with express shipping all over Pakistan.     The CONVERGE Pro 2 48T Audio DSP Mixer from ClearOne is a complete conferencing solution with 4 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in Telco interface for teleconferencing. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection.   The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.     Features: Architecture • 4 mic/line inputs with AEC •  Built-in Telco with ClearEffect processing •  Built-in USB for PC-based conferencing Scalable Connectivity •  Standalone and daisy-chained system •  Stack up units up to 96 mic/line inputs •  Expansion bus C-Link with 64 channels •  P-Link bus to connect 6 peripherals Configuration & Management •  CONSOLE software •  Auto-discovery of devices •  Matrix View for entire system •  FlowView for visualized audio signal paths •  System monitoring and troubleshooting Audio Signal Processing •  Acoustic Echo Cancellation processing •  Distributed Echo Cancellation on every mic input •  Noise cancellation with Adaptive-Ambience •  Acoustic Intelligence with faster convergence •  DARE feedback elimination •  Microphone gating Flexible Control Options •  Dialer app for Windows, Mac, iOS, and Android •  Tabletop controller with a touch panel •  Wall controller with buttons •  Web-based controller •  Supports 3rd-party control modules     Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Amplifier Output Speaker Output Port: Dual binding posts Audio: 2 x Channel Output Power: Maximum 10 W, 8 Ohms load Frequency Response: 20 Hz to 22 kHz @ +10 dBu, +/- 0.5 dBu THD + N: 20 Hz to 22 kHz @ +10 dBu, 1 W, Dynamic Range: 20 Hz to 22 kHz @ 20 dB, >102dB, with 20 kHz digital low pass filter Crosstalk: Channel to Channel, stimulus at 20 dBu, 10 W output to receptor 8⿦ load, 20 Hz to 22 kHz, Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 128T Audio DSP Mixer with express shipping all over Pakistan.   The CONVERGE Pro 2 128T Audio DSP Mixer from ClearOne is a complete conferencing solution with 12 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in Telco interface for teleconferencing. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection. The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.   Features: Architecture 12 mic/line inputs with AEC Built-in Telco with ClearEffect processing Built-in USB for PC-based conferencing Scalable Connectivity Standalone and daisy-chained system Stack up units up to 96 mic/line inputs Expansion bus C-Link with 64 channels P-Link bus to connect 6 peripherals Configuration & Management CONSOLE software Auto-discovery of devices Matrix View for entire system FlowView for visualized audio signal paths System monitoring and troubleshooting Audio Signal Processing Acoustic Echo Cancellation processing Distributed Echo Cancellation on every mic input Noise cancellation with Adaptive-Ambience Acoustic Intelligence with faster convergence DARE feedback elimination Microphone gating Flexible Control Options Dialer app for Windows, Mac, iOS, and Android Tabletop controller with a touch panel Wall controller with buttons Web-based controller Supports 3rd-party control modules   Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: Proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

Pive PoE means that int and outt voltage are.Transforms Non PoE devices to PoESupports 5V, 12V, 24V, 48V. required for power int - just use t (wall transformer) that is provided for t device you are trying to power. PoE injector and splitter kit with 5.5 x 2.1mm DC jack / plug. Use with IP security camera, wireless access point and otr devices. Can work up to30-40 meters / 100-130ft (depending on t quality of t cable and t lling power of t device). Specifications: Injector: RJ45 Male + Power In to RJ45 Female Splitter: RJ45 Female to RJ45 Male + Power Out Supports: 5V, 12V, 24V, 48V Power Pins: 4.5+ and 7.8 Length: 16cm / 6.9in Transssion distance: 30-40m / 100-130ft Application: WLAN, routers, switcs, internet telephony, security monitog etc Colour:Black Material:plastic Size:16x1.9x1.8cm Package Contents: 5 * PoE injector cable 5 * PoE splitter cable Only t above package content, otr products are not included.: Light and different displays may cause t color of t item in t picture a little different from t thing. T measuret allowed error is +/- 1-3cm.