Gateway system

Ubiquiti USG UniFi Security Gateway Router, Product Highlights Dual-Core 500 MHz Processor 2GB On-Board Flash Memory Wall Mountable Design 1 x RJ-45 Serial Console Port 3 x Gigabit Ethernet Ports   The UniFi Enterprise Gateway Router with Gigabit Ethernet from Ubiquiti Networks is designed to be implemented with compatible UniFi Enterprise Systems to provide routing and security to your local area network. With three Gigabit Ethernet ports and the ability to route up to 1 million packets per second this gateway is a versatile networking tool. Features such as an improved user experience and the ability to obtain an overview of your network allow you to manage nearly every aspect from mapping out subnets to provisioning additional UniFi devices. You can even create LAN & WLAN groups per UniFi device for greater control over large network deployments.   Deployment As part of the UniFi Enterprise System, the UniFi Security Gateway is deployed in the same manner as UniFi APs. Detection, provisioning, and management are all conducted from the UniFi Controller.  The UniFi Controller may reside on a management station located either on‑site and connected to the same Layer-2 network, or off-site in a cloud or NOC. Improved User Experience Redesigned to be more intuitive and easier to navigate, the revised UI raises the bar for enterprise network management efficiency. Important network details are logically organized for a simplified, yet powerful, interface. Packed with Features Use the UniFi Controller to provision thousands of UniFi APs and UniFi Security Gateways, map out networks, quickly manage system traffic, and provision additional UniFi devices. Network Overview A comprehensive overview of your Network Health is readily available in the dashboard. Monitor your network's vitals and make on‑the‑fly adjustments as needed. Detailed Analytics Use the configurable reporting and analytics to monitor large user groups and expedite troubleshooting. Multi-Site Management A single UniFi Controller running in the cloud can manage multiple sites: multiple, distributed deployments and multi‑tenancy for managed service providers. Each site is logically separated and has its own configuration, maps, statistics, guest portal, and administrator read/write and read-only accounts. LAN/WLAN Groups The UniFi Controller can manage flexible configurations of large deployments. Create multiple LAN and WLAN groups and assign them to the respective UniFi devices. Additional Features • 3 Gigabit Ethernet ports • 1 million packets per second for 64-byte packets • 3 Gb/s total line rate for packets 512 bytes or larger • Integrated and managed with UniFi Controller v4.x • Secure off-site management and monitoring • CLI management for advanced users • Silent, fanless operation Processor Dual-core 500 MHz, MIPS64 System Memory 512 MB DDR2 RAM On-Board Flash Storage 2 GB Max Power Consumption 7 W Power Supply 12 VDC, 1 A power adapter (included) Power Input 9 to 24 V DC, supported voltage range Certifications CE, FCC, IC Wall-Mount Yes Operating Temperature 14 to 113°F / -10 to 45°C Operating Humidity 10 to 90% non-condensing Layer 3 Forwarding Performance Packet Size 64 bytes - 1,000,000 pps 512 bytes or larger - 3 Gb/s (line rate) Networking Interfaces Serial Console Port 1 x RJ-45 serial port Data Ports 3 x 10/100/1000 Ethernet ports Please note VOIP port is disabled and reserved for future use Dimensions & Weight Dimensions 5.32 x 5.32 x 1.11" / 135.0 x 135.0 x 28.3 mm Weight 12.9 oz / 366 g Packaging Info Package Weight 1.65 lb Box Dimensions (LxWxH) 6.85 x 6.457 x 3.071"

Ubiquiti USG-PRO-4 Enterprise Gateway Router, Product Highlights Dual-Core 1 GHz Processor 2 GB On-Board Flash Memory Rackmountable Design 1 x RJ-45 Serial Console Port 2 x Gigabit WAN Ports 2 x Gigabit LAN Ports 2 x SFP Fiber Port Ubiquiti Networks USG-PRO-4 Overview   With four Gigabit Ethernet ports and two SFP combination ports, the USG-PRO-4 Enterprise Gateway Router with 2 Combination SFP/RJ-45 Ports from Ubiquiti Networks is designed to be the backbone of a network. This gateway is designed to support multiple network switches which in turn can support a variety of networked devices such as access points, management stations, VoIP devices, and much more. The integrated SFP combination ports make it simple to connect fiber channel devices such as SAN servers and other local area networked devices. On the back of this rackmountable gateway you will find a single RJ-45 serial console port for command line interface management, two LAN ports, two WAN ports, and two SFP combination ports offering a diverse set of connection options.   Ubiquiti Networks USG-PRO-4 Specs Processor Dual-Core 1 GHz, MIPS64 with hardware acceleration for packet processing System Memory 2 GB DDR3 RAM On-Board Flash Storage 4 GB Max Power Consumption 40 W Power Method 110-240 VAC Power Supply Internal AC/DC power adapter 60 W (24 V, 2.5 A) Certifications CE, FCC, IC Rackmountable Yes ESD/EMP Protection Air: ± 24 kV Contact: ± 24 kV Temperature & Humidity Operating Temperature: 14 to 113°F / -10 to 45°C Operating Humidity: 10 to 90% non-condensing Buttons Reset LEDs System: Status Data Ports: Speed/Link/Activity Layer 3 Routing Forwarding Performance Packet Size: 64 Bytes; 1,000,000 pps Packet Size: 512 Bytes or larger; 1 Gbps per port line rate Networking Interface Console Port 1 x RJ-45 serial port Data Ports 2 x Gigabit Ethernet ports 2 x Gigabit Ethernet/SFP combination ports System Requirements • Linux, Mac OS X, or Microsoft Windows 7/8/10 • Java Runtime Environment 1.6 (or above) • Web Browser: Mozilla Firefox, Google Chrome, or Microsoft Internet Explorer 10 (or above) • UniFi Controller software v4.8 or higher Dimensions & Weight Dimensions 19.06 x 1.73 x 6.46" / 484 x 44 x 164 mm Weight 5.07 lb / 2.30 kg Packaging Info Package Weight 6.6 lb Box Dimensions (LxWxH) 23.2 x 8.6 x 3.8"

The Yeastar NeoGate TA400 is a multi-port FXS gateway including 4 FXS ports, line echo cancellation and is compatible with both SIP and IAX2. The TA400 is ideal for small and medium enterprises that wish to integrate a traditional phone system into IP-based system. Yeastar NeoGate TA400 Overview Featuring 4 FSX ports, the Yeastar NeoGate TA400 connects analog terminals, PBX or key systems to the IP network using FXS connectivity. The NeoGate TA400 multi-port FXS gateway helps to preserve previous investments on legacy telephone systems and reduce communication costs significantly with the true benefits of VoIP. Yeastar NeoGate TA400 Features and Functions: Fully compliant with SIP and IAX2 Flexible calling rules Reliable fax performance with T.38 Provides high-quality voice compression with industry standard codecs Line echo cancellation for 32, 64 or 128 ms echo delays Web-based GUI for easy configuration and management Excellent interoperability with a wide range of legacy and IP equipment Didn't find the VoIP Gateway you were looking for? http://dreamsnw.com/fxs-gateway-ta400 Avalaible at Dreams Network & Technology (Pvt) Ltd. Contact: LHR: 04235784892 KHI: 02134710763, 02134711677, 02134721416

Yeastar TA3200 provides 32 FXS ports to integrate analog phones, Fax machines and legacy PBX systems into IP communications system. TA3200 allows users to deploy the economical solution in enterprises rapidly and confidently. TA3200 is a stand-alone FXS VoIP gateway with carrier-grade features and reliability. 32 FXS ports Fully compliant with SIP and IAX2 Flexible calling rules Superb voice compression with industry standard codecs Line echo cancellation for 8, 16, 32, 64 or 128 ms echo delays Tested and certified with Elastix, BroadSoft, and others TA3200 has an easy-to-use Web interface which allows super easy and straightforward configuration. LED indicators present system and port status visually User-friendly Web GUI and intuitive operations Comprehensive call log, system logs, hardware logs, and debug logs TA3200 can be applied by SOHO business, enterprise users, service providers, contact centers, dispatching system, and many more. Customer premises gateway for SIP Trunking Access device for enterprise converged communications Remote access device for call center and dispatching system Access device for Lync Server integration solutions Contact: LHR: 04235784892 KHI: 02134710763 for more info visit: http://dreamsnw.com/

Yeastar NeoGate TA410 The Yeastar NeoGate TA410 is a multi-port FXO gateway including 4 FXO ports, line echo cancellation and is compatible with both SIP and IAX2. The TA410 is ideal for small and medium enterprises that wish to integrate a traditional phone system into IP-based system. Yeastar NeoGate TA410 Overview Featuring 4 FXO ports, the Yeastar NeoGate TA410 connects analog terminals, PBX or key systems to the IP network using FXO connectivity. The NeoGate TA410 multi-port FXO gateway helps to preserve previous investments on legacy telephone systems and reduce communication costs significantly with the true benefits of VoIP. Yeastar NeoGate TA410 Features and Functions: Fully compliant with SIP and IAX2 Flexible calling rules Reliable fax performance with T.38 Provides high-quality voice compression with industry standard codecs Line echo cancellation for 32, 64 or 128 ms echo delays Web-based GUI for easy configuration and management Excellent interoperability with a wide range of legacy and IP equipment http://dreamsnw.com/fxo-gateway-ta410 Avalaible at Dreams Network & Technology (Pvt) Ltd. Contact: LHR: 04235784892 KHI: 02134710763, 02134711677, 02134721416

Yeastar TA800 features 8 FXS ports for analog phones and is designed to meet various demands of IP applications. The powerful features and robust performance simplify the integration of legacy phone system and IP-based system. TA800 is a stand-alone FXS VoIP gateway with carrier-grade features and reliability. 8 FXS ports Fully compliant with SIP and IAX2 Flexible calling rules Superb voice compression with industry standard codecs Line echo cancellation for 8, 16, 32, 64 or 128 ms echo delays Tested and certified with Elastix, BroadSoft, and others Featuring book-like design, TA800 is elegant in appearance and flexible in installation. It is a desktop device and also wall mountable. Place it on the table, it not only provides convenient connection of analog phones but also decorates your office pleasantly. Mount it on the wall, it saves you space and gives you more flexibility. TA800 has an easy-to-use Web interface which allows super easy and straightforward configuration. LED indicators present system and port status visually User-friendly Web GUI and intuitive operations Comprehensive call log, system logs, hardware logs, and debug logs Contact: LHR: 04235784892 KHI: 02134710763 for more info visit: http://dreamsnw.com/

Description: Details iShopping.pk brings you the best price for Netgear Nighthawk AC1900 Dual-Band Wi-Fi Range Extender White (EX6400-100NAS) with express shipping all over Pakistan.   Specifications: WIFI TECHNOLOGY 802.11ac WIFI PERFORMANCE AC1900† WIFI BAND Dual Band 2.4 & 5GHz NUMBER OF ETHERNET PORTS One (1) 10/100/1000 Mbps Gigabit Ethernet port with auto-sensing technology NUMBER OF USB PORTS N/A KEY FEATURES Works with your home WiFi to create a more powerful WiFi System Smart Roaming automatically connects your mobile devices to the best available WiFi as you move around your house Extend WiFi coverage with one WiFi name and password Easily creates a whole home WiFi system with your existing gateway or router EASE OF USE CD-less setup—great for mobile devices Push ‘N’ Connect using Wi-Fi Protected Setup®(WPS)1 SECURITY WiFi Protected Access® (WPA/WPA2-PSK) and WEP PHYSICAL SPECIFICATIONS Dimensions: 6.34 x 3.2 x 1.75 in (161 x 81.4 x 44.5 mm) Weight: 0.66 lb (0.3 kg) STANDARDS IEEE® 802.11 b/g/n 2.4GHz IEEE 802.11 a/n/ac 5GHz One (1) 10/100/1000 Mbps Gigabit Ethernet port with auto-sensing technology   Features: Create your own Mesh Network This Mesh Wi-Fi Extender improves coverage and works with your home Wi-Fi to create a powerful Wi-Fi System. Smart Roaming Freely move around your home without the fear of disconnecting. The Wi-Fi Mesh extender automatically hands off your connection between your router and extender. One Wi-Fi Name Creates a single network and extends coverage of your home's Wi-Fi with one Wi-Fi name and security password. Works with your Existing Wi-Fi Easily creates an extended mesh Wi-Fi system with your existing gateway, router, or ISP provided gateway. Dual band Wi-Fi up to 1.9Gbps Extends 2.4 and 5 GHz Wi-Fi signals from existing Wi-Fi routers for better range. Smart Connect Intelligently selects the optimal Wi-Fi band for every device. Max Coverage High power amplifiers and internal antenna array increase whole-home coverage. MU-MIMO Simultaneous streaming to multiple devices. *Note for existing users: Update the firmware of your Mesh Extender to receive the new Mesh Wi-Fi firmware features.

Description: Details iShopping.pk brings you the best price for Netgear Nighthawk X4 AC2200 Dual-Band Wi-Fi Range Extender White (EX7300-100NAS) with express shipping all over Pakistan.   Specifications: WIFI TECHNOLOGY 802.11ac WIFI PERFORMANCE AC2200 (450 Mbps+ 1733Mbps)+ WIFI BAND Dual Band 2.4 & 5GHz NUMBER OF ETHERNET PORTS One (1) 10/100/1000 Mbps Gigabit Ethernet port with auto-sensing technology NUMBER OF USB PORTS N/A KEY FEATURES Create a whole-home mesh WiFi using your existing gateway or router. Smart Roaming automatically connects your mobile devices to the best available WiFi as you move around your house Extend WiFi coverage with one WiFi name and password Dual band WiFi up to 2.2Gbps EASE OF USE CD-less setup—great for mobile devices Push ‘N’ Connect using Wi-Fi Protected Setup®(WPS)1 Power on/off button SECURITY Wi-Fi Protected Access® (WPA/WPA2–PSK) and WEP PHYSICAL SPECIFICATIONS Dimensions: 6.34 x 3.2 x 1.75 in (161 x 81.4 x 44.5 mm) Weight: 0.66 lb (0.3 kg) STANDARDS IEEE® 802.11 b/g/n 2.4GHz IEEE 802.11 a/n/ac 5GHz One (1) 10/100/1000 Mbps Gigabit Ethernet port with auto-sensing technology   Features: Create your own Mesh Network This Mesh Wi-Fi Extender improves coverage and works with your home Wi-Fi to create a powerful Wi-Fi System. Smart Roaming Freely move around your home without the fear of disconnecting. The Wi-Fi Mesh extender automatically hands off your connection between your router and extender. One Wi-Fi Name Creates a single network and extends coverage of your home's Wi-Fi with one Wi-Fi name and security password. Works with your Existing Wi-Fi                                                              Easily creates an extended mesh Wi-Fi system with your existing gateway, router, or ISP provided gateway. Dual band Wi-Fi up to 2.2Gbps Extends 2.4 and 5 GHz Wi-Fi signals from existing Wi-Fi routers for better range. Smart Connect Intelligently selects the optimal Wi-Fi band for every device. Max Coverage High power amplifiers and internal antenna array increase whole-home coverage. MU-MIMO Simultaneous streaming to multiple devices. *Note for existing users: Update the firmware of your Mesh Extender to receive the new Mesh Wi-Fi firmware features.

The UVP UniFi VoIP Phone from Ubiquiti Networks is an enterprise desktop smartphone with a 5" high-definition touchscreen display. Featuring the Android Kit Kat (v4.4.2) OS, this VoIP phone allows you to download and install your favorite apps from the Google Play store, stream media, browse the Internet, and access content created and stored in your Google accounts. This VoIP phone can be connected to an 802.3af compliant switch using a standard Ethernet cable. It is designed to integrate with the UniFi Controller and UniFi Security Gateway, so the phone is automatically provisioned for fast deployment. Multiple UniFi VoIP Phones can be easily deployed and managed with UniFi software, and each phone can be uniquely personalized. Suitable for Corporate Environments Enterprise desktop smartphone solution with 5” high-definition color display Touchscreen display for navigation Sleek and elegant design Designed for communication, organization, and productivity High-fidelity audio Multiple UniFi VoIP Phones can be easily deployed and managed with UniFi software, and each phone can be uniquely personalized Bundled with UniFi Controller software at no extra cost - no separate software, licensing, or support fee Plug-and-Play Installation A standard Ethernet cable can be used to connect and power the UniFi VoIP phone with a UniFi Switch (or other 802.3af compliant switch) Designed to integrate with UniFi Controller and UniFi Security Gateway, so the phone is automatically provisioned for fast deployment PBX Integration Ubiquiti’s proprietary SDN software, UniFi Controller, readily integrates with a scalable PBX system for management of features such as call logging, auto-attendant, voicemail, and mass configuration The VoIP phone is suitable for quick deployment in small businesses, corporate locations, schools, and hotels Android Operating System Powered by Android Kit Kat (v4.4.2) OS Allows you to download and install your favorite apps from the Google Play store, stream media, browse the Internet, and access content created and stored in your Google accounts Contact: LHR: 04235784892 KHI: 02134710763 for more info visit: http://dreamsnw.com/unifi-voip-phone