G 5 red zone note

Description: Details iShopping.pk brings you the best price for TP-Link 2.4GHz 300Mbps 9dBi Outdoor CPE (CPE210) with express shipping all over Pakistan.   Features: • Built-in 9dBi 2x2 dual-polarized directional MIMO antenna •  Adjustable transmission power from 0 to 27dBm/500mw •  System-level optimizations for more than 5km long range wireless transmission •  TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications •  Centralized Management System – Pharos Control •  AP / Client / Bridge / Repeater / AP Router / AP Client Router (WISP) operation modes •  Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely • Outdoor stabilized enclosure with IPX5 waterproof certification • Dual Ethernet ports and grounding terminal integrated • 6KV Lightning Protection, 15KV ESD Protection • Provides WEP, WPA/WPA2, WPA-PSK/WPA2-PSK data security • Selectable bandwidth of 5/10/20/40MHz • Provides Throughput Monitor, Spectrum Analyzer, Speed Test and Ping tools • Easy antenna alignment with wireless signal quality indicators via Web interface   Specification: HARDWARE Processor Qualcomm Atheros 560MHz CPU, MIPS 74Kc Memory 64MB DDR2 RAM, 8MB Flash Interface 1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in) 1 10/100Mbps Shielded Ethernet Port (LAN1, Passive PoE Passthrough) 1 Grounding Terminal 1 Reset Button Power Supply Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins) Voltage range: 16-27VDC Power Consumption 10.5 Watts Max Note: When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable. Dimensions (W x D x H) 224 x 79 x 60 mm Antenna Type Built-in 9dBi 2x2 Dual-polarized Directional Antenna Beam Width: 65° (H-Plane) / 35° (E-Plane) Note: For more details, please refer to datasheet Protection 15KV ESD Protection 6KV Lightning Protection Enclosure Outdoor ASA stabilized plastic material IPX5 waterproof Certification WIRELESS  Wireless Standards IEEE 802.11b/g/n (with Pharos MAXtream disabled) Proprietary Protocol TDMA Mode (with Pharos MAXtream enabled) Wireless Speeds Up to 300Mbps (40MHz,Dynamic) Up to 144.4Mbps (20MHz,Dynamic) Up to 72.2Mbps (10MHz,Dynamic) Up to 36.1Mbps (5MHz,Dynamic) Frequency 2.4~2.483GHz Note: Available operating frequency may vary depending on the limitations of the countries or regions in which the device is used. Transmission Power 27dBm/500mw (Adjustable power by 1dBm) Note: Maximum transmission power may vary across different channels depending on the limitations of the countries or regions in which the device is used. SOFTWARE Wireless Configurations Pharos MAXtream TDMA Technology 802.11b/g/n Modes Selectable Channel Width: 5/10/20/40MHz Automatic Channel Selection Transmission Power Control Dynamic Frequency Selection (DFS) WDS Enable/Disable Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption SSID Broadcast Enable/Disable Multi-SSID with VLAN Tagging (AP mode only) Distance/ACK Timeout Setting Wireless MAC Address Filter Wireless Advanced: > Beacon Interval/RTS Threshold/Fragmentation >Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia Management Discovery and Remote Management via Pharos Control application HTTP/HTTPS Web-based management System Log SNMP Agent(v2c) Ping Watch Dog Dynamic DDNS SSH Server System Tools Wireless Signal Quality Indicators: Signal Strength/Noise/Transmit CCQ/CPU/Memory Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP Spectrum Analyzer Speed Test Ping Traceroute System-level Optimizations Optimized IGMP Snooping/Proxy for multicast applications Hardware watch dog POE ADAPTER Dimensions(W x D x H) 110*57*33.5mm Input Current 0.8A Max @ 100VAC Input Voltage 100VA~240VAC @ 50Hz~60Hz Output 24VDC, 1.0A Max +4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet) Efficiency >80% Output Voltage 24VDC(+4,5pins; -7,8pins) Input 100-240VAC, 50/60Hz Power Status LEDs 0~0.8A: Green 0.8A~1.0A: Red Certifications CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark Interfaces 1 AC Jack with Earth Ground 1 10/100/1000Mbps Shielded Ethernet Port (Power + Data) 1 10/100/1000Mbps Shielded Ethernet Port (Data) Button Remote Reset Button OTHERS Certification CE, FCC, RoHS, IPX5 System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux. Note: We recommend you to use one of following Web browsers for an improved user experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended. Environment Operating Temperature: -30°C~70°C (-22℉~158℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~95% non-condensing   TP-LINK’s 2.4GHz 300Mbps 9dBi Outdoor CPE, the CPE210 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications.  Professional performance, coupled with user-friendly design, makes CPE210 an ideal choice for both business and home users.     Enterprise Hardware With Qualcomm Atheros enterprise level chipsets, high gain antennas and high quality material, specially designed enclosure, and PoE power supply, CPE210 is specially designed for outdoor use and can operate flawlessly in almost any climate, with operating temperatures ranging from -40℃ (-40℉) to +70 ℃ (158℉).   Advanced Antenna System Built-in High Gain Dual-Polarized Antenna  Dedicated metal reflector ensures higher gain  and lower noise interference   5km+ Wireless Data Transmission Specially designed for outdoor uses, ideal for long distance wireless data transmis sion over 5km+, tested in the field.     TP-LINK MAXtream TDMA Technology As network scale increases, wireless competition and collisions among CPEs and base stations will be so enormous that the real throughput of the network will drop, resulting in a serious impact on end-user experience. To mitigate these effects, the CPE210 uses MAXtream TDMA Technology.   Pharos Control – Centralized Management System CPE210 also comes equipped with centralized management software that helps users easily manage all the devices in their network from a single PC - Pharos Control. Functions like device discovery, status monitoring, firmware upgrading, and network maintenance can be managed using Pharos Control.   PharOS User-friendly web-based management system allows professionals to do more specific configurations.

Linksys WAP1200AC AC1200 Wi-Fi  The  Linksys WAP1200AC AC1200 Wi-Fi Access Point  is the latest in the AC-series access points, which utilizes the  Cross Band technology.  It can be used as a  Wireless Range Extender  or a  Wired Access Point.  Both functions maximize simultaneous use of the 2.4 GHz and 5 GHz bands for high-speed data transfer, uninterrupted streaming, and gaming.   Front Panel    Antenna positioning is done depending on the type of home you have. IMPORTANT:   The antennas are fixed and can  ONLY  rotate at  180 degrees.  Do  NOT  force the antennas too far back, otherwise, they will break. For  Single-story homes  -   Both antennas should be pointing  down. NOTE:   For illustration purposes, the Linksys RE6700 is used in this example. For  Multi-story homes  -  One (1)  antenna should  always be pointing down  to provide coverage for the current floor.  The second antenna (any antenna) should be positioned differently  depending  on where the Linksys WAP1200AC is located and where the coverage is needed. NOTE:   For the most part, position one (1) antenna at  45 degrees  as shown in  Position   A  below.  If there are issues with coverage, move the antenna at about  50-55 degrees  down as shown in  Position   B.    Position A  can be used if the Linksys WAP1200AC is in the  middle  of the house.   Position B  can be used if the Linksys WAP1200AC is connected to an outlet located at the  farther side  of the house.   Side Panel    Wi-Fi Protected Setup™ (WPS)  button – Uses the WPS technology to automatically and securely add wireless devices to your network.  Reset  button – Press and hold for  10 seconds  to reset the Linksys WAP1200AC to factory default settings.   Bottom Panel    ETHERNET  port – Connect an Ethernet-enabled device to the network using either a  Cat 5  or  6  Ethernet cable.   Product Features Concurrent dual-band (2.4 GHz and 5 GHz) 802.11ac Wireless technology Compatible with 802.11 a/b/g/n Data Rate of up to 300 Mbps for 2.4 GHz and up to 867 Mbps for 5 GHz Two (2)  external non-detachable antennas 2 x 2 Spatial Streams One (1)  10/100/1000 Fast Ethernet port with auto MDIX sensing Spot Finder technology (on Range Extender Mode only) Wi-Fi Protected Setup™ (WPS) Browser-based Setup (BBS) Cross Band technology  (on Range Extender Mode only) Beamforming technology LED Behaviors  Power / WPS LED: OFF  – There is no power on the Linksys WAP1200AC. Blinking Green   / Yellow  – The Linksys WAP1200AC is starting up, resetting to factory defaults, upgrading its firmware, or the WPS connection is in process. Solid Green   / Yellow  – The Linksys WAP1200AC is ready to use. Solid Amber   / Red  – There is a weak connection with the router. NOTE:   To fix this issue, unplug the Linksys WAP1200AC and move it closer to the router. Blinking Amber / Red  – The Linksys WAP1200AC is not connected to the router, or the WPS pairing failed. NOTE:   To fix this issue, make sure that your router has an active Internet connection and the Wi-Fi is turned ON.  If the router is working fine, unplug the Linksys WAP1200AC then move it closer to the router.  Plug it back in, wait for one (1) minute, and reconnect to your network.  Ethernet LED  –   It lights up solid  Green  when an Ethernet device is connected and active.  It will blink when sending or receiving data over the Ethernet port.   Product Requirements Wi-Fi enabled computers or mobile devices AC power outlet Ethernet router or switch with available RJ45 Ethernet port and RJ45 Cable for Access Point mode or wireless network for Range Extender mode For browser configuration: Internet Explorer® 8 or higher Safari® 5.1 for Mac® or higher Google Chrome™ 25.0 or higher Firefox® 20 or higher   

Description: Details iShopping.pk brings you the best price for TP-Link 2.4GHz 300Mbps 12dBi Outdoor CPE (CPE220) with express shipping all over Pakistan.   Features: • Built-in 12dBi 2x2 dual-polarized directional MIMO antenna •  Adjustable transmission power from 0 to 30dBm/1000mw •  System-level optimizations for more than 13km long range wireless transmission •  TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications •  Centralized Management System – Pharos Control •  AP / Client / Bridge / Repeater / AP Router / AP Client Router (WISP) operation modes •  Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely   Specification: HARDWARE Processor Qualcomm Atheros 560MHz CPU, MIPS 74Kc Memory 64MB DDR2 RAM, 8MB Flash Interface 1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in) 1 10/100Mbps Shielded Ethernet Port (LAN1, Passive PoE Passthrough) 1 Grounding Terminal 1 Reset Button Power Supply Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins) Voltage range: 16-27VDC Power Consumption 10.8 Watts Max Note: When deployed using Passive PoE, the power drawn from the power source will  be higher by some amount depending on the length of the connecting cable. Dimensions (W x D x H) 11×3.1×2.1 inch (276×79×60 mm) Antenna Type Built-in 12dBi 2x2 Dual-polarized Directional Antenna Beam Width: 60° (H-Plane) / 30° (E-Plane) Note: For more details, please refer to datasheet Protection 15KV ESD Protection 6KV Lightning Protection Enclosure Outdoor ASA stabilized plastic material IPX5 waterproof Certification WIRELESS Wireless Standards IEEE 802.11b/g/n (with Pharos MAXtream disabled) Proprietary Protocol TDMA Mode (with Pharos MAXtream enabled) Wireless Speeds Up to 300Mbps (40MHz,Dynamic) Up to 144.4Mbps (20MHz,Dynamic) Up to 72.2Mbps (10MHz,Dynamic) Up to 36.1Mbps (5MHz,Dynamic) Frequency 2.4~2.483GHz Note: Available operating frequency may vary depending on the limitations  of the countries or regions in which the device is used. Transmission Power 30dBm/1000mw (Adjustable power by 1dBm) Note: Maximum transmission power may vary across different channels depending  on the limitations of the countries or regions in which the device is used. SOFTWARE Wireless Configurations Pharos MAXtream TDMA Technology 802.11b/g/n Modes Selectable Channel Width: 5/10/20/40MHz Automatic Channel Selection Transmission Power Control Dynamic Frequency Selection (DFS) WDS Enable/Disable Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption SSID Broadcast Enable/Disable Multi-SSID with VLAN Tagging (AP mode only) Distance/ACK Timeout Setting Wireless MAC Address Filter Wireless Advanced: > Beacon Interval/RTS Threshold/Fragmentation >Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia Management Discovery and Remote Management via Pharos Control application HTTP/HTTPS Web-based management System Log SNMP Agent(v2c) Ping Watch Dog Dynamic DDNS SSH Server System Tools                                     Wireless Signal Quality Indicators: Signal Strength/Noise/Transmit CCQ/CPU/Memory Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP Spectrum Analyzer Speed Test Ping Traceroute System-level Optimizations Optimized IGMP Snooping/Proxy for multicast applications Hardware watch dog POE ADAPTER Dimensions(W x D x H) 110×57×33.5mm Input Current 0.8A Max @ 100VAC Input Voltage 100VA~240VAC @ 50Hz~60Hz Output 24VDC, 1.0A Max +4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet) Efficiency >80% Output Voltage 24VDC(+4,5pins; -7,8pins) Input 100-240VAC, 50/60Hz Power Status LEDs 0~0.8A: Green 0.8A~1.0A: Red Certifications CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark Interfaces 1 AC Jack with Earth Ground 1 10/100Mbps/1000Mbps Shielded Ethernet Port (Power + Data) 1 10/100Mbps/1000Mbps Shielded Ethernet Port (Data) Button Remote Reset Button OTHERS Certification CE, FCC, RoHS, IPX5 System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7,  MAC OS, NetWare, UNIX or Linux. Note: We recommend you to use one of following Web browsers for an improved user  experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended. Environment Operating Temperature: -40°C~70°C (-40℉~158℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~95% non-condensing   TP-LINK’s 2.4GHz 300Mbps 12dBi Outdoor CPE, the CPE220 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications.  Professional performance, coupled with user-friendly design, makes CPE220 an ideal choice for both business and home users. Enterprise Hardware With Qualcomm Atheros enterprise level chipsets, high gain ante nnas and high quality material, specially designed enclosure, and P oE power supply, CPE220 is specially designed for outdoor use and can operate flawlessly in almost any climate, with operating temperatures ranging from -40℃ (-40℉) to +70 ℃ (158℉).     Advanced Antenna System Built-in High Gain Dual-Polarized Antenna  Dedicated metal reflector ensures higher gain  and lower noise interference   13km+ Wireless Data Transmission Specially designed for outdoor uses, ideal for long distance wireless data transmission over 13km+, tested in the field.     TP-LINK MAXtream TDMA Technology As network scale increases, wireless competition and collisions among CPEs and base stations will be so enormous that the real throughput of the network will drop, resulting in a serious impact on end-user experience. To mitigate these effects, the CPE220 uses MAXtream TDMA Technology.   Pharos Control – Centralized Management System CPE220 also comes equipped with centralized management software that helps users easily manage all the devices in their network from a single PC - Pharos Control. Functions like device discovery, status monitoring, firmware upgrading, and network maintenance can be managed using Pharos Control.   PharOS User-friendly web-based management system allows professionals to do more specific configurations.

Description: Details iShopping.pk brings you the best price for ASUS ZenBeam Go E1Z 150 Lumen WVGA USB Pocket Projector with 2 years official warranty and express shipping all over Pakistan.   Specifications: Display Display Technology: 0.2" DLP® Light Source: R/G/B LED Light Source Life (max): 30000 hours True Resolution (native): WVGA(854x480) Light Output (max): 150 lumens  Contrast Ratio: 3500:1  Color Saturation:100%(NTSC) Display Colors:16.7M Projection Lens Throw Ratio: 1.4 Projection Distance: 0.5 ~3.7 meters Projection/Screen Size: 16 ~120 inchs Projection Offset: 100% Zoom Ratio: Fixed Video Feature Keystone adjustment: Digital (Up to +/- 40 degree) Auto Keystone: Yes Aspect Ratio: Auto/4:3 /16:9 Projector Placement: Front Table/Front Ceiling/Rear Table/Rear Ceiling Audio Features Built-in Speaker: 2 W x 1 Power Power Consumption: Power On Mode: ≤18 W Standby Mode: Internal Battery: 5 V, 6000 mAh, Battery life: 5 hours @ 50 lumens *1 Noise Level 30 dB(Standard mode)/ 28 dB (Theater mode) Interface Signal Input: HDMI, MHL Audio Output: Earphone out USB Port: 1 x Type A port, *2 Mechanical Design Chassis Colors: Silver On-machine Buttons: Yes, () Tripod Socket: Yes Dimensions Physical Dimension(WxHxD):110 x 29 x 83 mm  Box Dimension (WxHxD):170 x 135 x 95mm Weight Net Weight (Esti.):307g Gross Weight (Esti.):880g Operation Temperature 0~40℃  Operation Humidity 20-90% Accessories Carrying Bag HDMI cable Power Adapter Quick Start Guide AC plug Compliance and Standards                            CB, CE,FCC,VCCI, CU, C-Tick, CCC, PSE,IEC62471,CEC Note *1. The battery has a lifespan and ages every time when it is charged and discharged. It will gradually loose its charging capability as it ages.  *2. for power charge usage   Features: ASUS ZenBeam Go E1Z WVGA plug-and-play (Android/Windows) Micro-USB Pico Projector Pico-projection at only W4.3 x H1.1 x D3.3 inches and 0.68 pounds that automatically converts Full HD input to WVGA Up to 5 hours of playtime with a built-in rechargeable battery that doubles as a 6400mAh power bank Instant set-up and optimized display with Auto Keystone Correction and DLP® IntelliBright™ technology through the DisplayLink app for Android/Windows Magnificent 120-inch projections with micro-USB connectivity and professional grade audio by ASUS SonicMaster Audio Technology 2016 iF Product Design Award and a reddot Design Award winner for Zen-inspired design   The world's brightest USB pocket projector The ASUS ZenBeam Go E1Z is the world's brightest USB pocket projector. Though small enough to fit in the palm of your hand, it delivers bright and crisp imagery of up to 120 inches wide (diagonal measurement). At only 83mm x 29mm x 110mm, and weighing just 307 g, it's the ideal solution for people on the go. Simply plug it in via a standard USB 2.0 connection or the bundled USB Type-C™ adaptor, then begin projecting from your PC, laptop or mobile device. ZenBeam Go E1Z features a built-in rechargeable battery that provides up to five hours of projection time, and it can also be used as a 6,400 mAh power bank for charging mobile devices.   Fast and easy setup Setting up the ZenBeam Go E1Z is easy: Just plug it in, point it at any screen or flat vertical surface, and start projecting. A focus ring assists with minute adjustments, so you get crystal clear imagery, every time.   Bright and crisp 120” projections Offering 100% NTSC color gamut and 150 lumens Eco-LED technology with a 30,000-hour lifespan, the E1Z delivers bright and crisp WVGA (854 x 480) visuals. It scales down Full HD (1980 x 1080) video files to match its native resolution, projecting 15 to 120 inch diagonal images at close distances. The ZenBeam Go E1Z is especially useful in confined spaces: it can project a full 120-inch image from just 3.7m away. ZenBeam Go E1Z also features DLP® IntelliBright™ technology, which boosts brightness and contrast by up to 30% while lowering power consumption by up to 50%.   Up to 5 hours of cable-free projection A built-in 6,400 mAh battery provides up to five hours of cable-free projection time on a full charge, so there's no need for a power adapter. The ZenBeam Go E1Z can also serve as a power bank: simply plug your mobile devices in to charge.   Auto Keystone correction An Auto Keystone correction feature automatically detects the projector's orientation and corrects distortions that result from angled projections.   Built-in speaker with ASUS SonicMaster technology The ZenBeam Go E1Z includes an integrated ASUS SonicMaster-enhanced speaker for clear, powerful sound.   Perfect for Android and Windows devices The ZenBeam Go E1Z works with laptops, PCs and mobile devices. To project app or content ** from your mobile device, simply download and use the DisplayLink app. To check battery status or adjust brightness or battery settings, use the ZenBeam app. Award-winning design Since its release, ZenBeam Go E1Z has received iF Product Design, Good Design, Best Choice and Red Dot Design awards.

Description: Details iShopping.pk brings you the best price for ASUS ZenBeam E1 150 Lumen WVGA LED Pocket Pico Projector with 2 years official warranty and express shipping all over Pakistan.   Specifications: Display Display Technology: 0.2" DLP® Light Source: R/G/B LED Light Source Life (max): 30000 hours True Resolution (native): WVGA(854x480) Light Output (max): 150 lumens  Contrast Ratio: 3500:1  Color Saturation:100%(NTSC) Display Colors:16.7M Projection Lens Throw Ratio: 1.4 Projection Distance: 0.5 ~3.7 meters Projection/Screen Size: 16 ~120 inchs Projection Offset: 100% Zoom Ratio: Fixed Video Feature Keystone adjustment: Digital (Up to +/- 40 degree) Auto Keystone: Yes Aspect Ratio: Auto/4:3 /16:9 Projector Placement: Front Table/Front Ceiling/Rear Table/Rear Ceiling Audio Features Built-in Speaker: 2 W x 1 Power Power Consumption: Power On Mode: ≤24 W Standby Mode: Internal Battery: 5 V, 6000 mAh, Battery life: 5 hours @ 50 lumens *1 Noise Level 30 dB(Standard mode)/ 28 dB (Theater mode) Interface Signal Input: HDMI, MHL Audio Output: Earphone out USB Port: 1 x Type A port, *2 Mechanical Design Chassis Colors: Silver On-machine Buttons: Yes, () Tripod Socket: Yes Dimensions Physical Dimension(WxHxD):110 x 29 x 83 mm  Box Dimension (WxHxD):170 x 135 x 95mm Weight Net Weight (Esti.):307g Gross Weight (Esti.):880g Operation Temperature 0~40℃  Operation Humidity 20-90% Accessories Carrying Bag HDMI cable Power Adapter Quick Start Guide AC plug Compliance and Standards                            CB, CE,FCC,VCCI, CU, C-Tick, CCC, PSE,IEC62471,CEC Note *1. The battery has a lifespan and ages every time when it is charged and discharged. It will gradually loose its charging capability as it ages.  *2. for power charge usage   Features: ASUS ZenBeam E1 Pocket LED Projector, 150 Lumens, Built-in 6000mAh Battery, Up to 5-hour Projection, Power Bank, Auto Keystone Correction, HDMI/MHL • 150-lumen output with WVGA (854x480) resolution that automatically accepts FullHD 1080p sources •  Projects visuals ranging up to 120 inches •  Built-in 6,000mAh battery provides up to 5 hours of projection time and doubles as a power bank for mobile devices. •  Project content from mobile devices, media streamers, and gaming consoles via HDMI/MHL •  Quick, easy setup with instant on/off capabilities, auto keystone correction and ASUS SonicMaster speaker   A TV-sized screen in your pocket ASUS ZenBeam E1 is a TV-sized screen in your pocket that's able to deliver up to 120-inch-diagonal projections. Designed with compatibility in mind, this palm-sized projector has an HDMI/MHL input to connect to everything including PCs, smartphones and media streamers. ASUS ZenBeam E1 includes a built-in 6000mAh rechargeable battery that delivers up to 5 hours of projection time when you're on the go, and doubles as a power bank for your mobile devices.   Award-winning Zen-inspired design Catering to the stylish on-the-go traveler, ASUS ZenBeam E1 weighs only 307g and has ultra-compact dimensions of 83 x 29 x 110mm. The Zen-inspired design, with its understated aesthetic and spun-metal finish on the lens cap, recently helped ZenBeam E1 win both an iF Product Design Award and a Red Dot Design Award, which are prestigious global awards celebrating design excellence.   Up to 120-inch images for true-to-life entertainment At the heart of ASUS ZenBeam E1 is its bright 150 lumen Eco-LED light source with 30,000-hour lifespan and 100% NTSC color gamut. DLP®IntelliBright™ technology efficiently boosts brightness and contrast by up to 30%, while lowering power consumption by up to 50%. Accepting up to Full HD 1080p sources, the ASUS Zenbeam E1 automatically scales to its native WVGA (854 x 480) resolution, while preserving visual clarity and integrity to deliver projections sized from 15 inches up to 120 inches, even at short distances.   Perfect for mobile devices, game consoles, compute sticks and media streamers The HDMI/MHL* port on the ASUS ZenBeam E1 easily connects to game consoles and MHL-enabled mobile devices and can even charge your mobile device while simultaneously projecting content.  The ASUS ZenBeam E1 is also compatible with a variety of media streamers even with compute sticks like chromebit, vivosticks so you can enjoy movies and TV series.   Up to 5 hours of cable-free projection ASUS ZenBeam E1 has a built-in rechargeable battery that gives you up to 5 hours of cable-free projection time. It also doubles as a power bank to charge mobile devices on the go.   Fast and easy setup Setting up ASUS ZenBeam E1 is easy. Just connect a source, turn on ASUS ZenBeam E1 and adjust focus using the focus ring for up to 120-inch projections when placed just 3.7m from any flat surface.   Auto keystone correction Auto keystone correction automatically eliminates trapezoidal images that can result from angled projection, achieving a perfect rectangle every time.   Built-in speaker with ASUS SonicMaster technology ASUS ZenBeam E1 provides exceptional sound through its exclusive ASUS SonicMaster-enhanced speaker for a truly cinematic audiovisual experience.