Ft 3x3

Cisco AIR-AP1832I-H-K9 Wireless Access Point / Aironet Specifictions Software Cisco Unified Wireless Network Software Release with AireOS wireless controllers: 8.1.121.0 or later for the Cisco Aironet 1830 Series Access Points Deployment modes Centralized, standalone, sniffer, Cisco FlexConnect ™, monitor, OfficeExtend, mesh Supported wireless LAN controllers Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Cisco Catalyst ® 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco 5520 Series Wireless Controllers, Cisco Flex ®  7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco 8540 Series Wireless Controllers, Cisco 5760 Wireless LAN Controller, Cisco Catalyst 3650 and 3850 Series Switches with integrated controller Cisco Mobility Express 802.11n version 2.0 (and related) capabilities 3x3 MIMO with two spatial streams Maximal ratio combining (MRC) 20- and 40-MHz channels PHY data rates up to 300 Mbps (40 MHz with 5 GHz) Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) 802.11 dynamic frequency selection (DFS) Cyclic shift diversity (CSD) support 802.11ac Wave 1 and 2 capabilities 3x3 MIMO with two spatial streams, single-user or multiuser MIMO MRC 802.11ac beamforming (transmit beamforming) 20-, 40-, and 80-MHz channels PHY data rates up to 867 Mbps (80 MHz in 5 GHz) Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) 802.11 DFS CSD support Integrated antenna 2.4 GHz, gain 3 dBi, internal omni, horizontal beamwidth 360° 5 GHz, gain 5 dBi, internal omni, horizontal beamwidth 360° Interfaces 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE) Management console port (RJ-45) USB 2.0 (enabled via future software) Indicators Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors Dimensions (W x L x H) Access point (without mounting bracket): 8.3 x 8.3 x 2 in. (210.8 x 210.8 x 50.8 mm) Weight 3.12 lb (1.41 kg) Environmental Cisco Aironet 1830i Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) Nonoperating (storage) altitude test: 25˚C, 15,000 ft. Operating temperature: 32° to 104°F (0° to 40°C) Operating humidity: 10% to 90% (noncondensing) Operating altitude test: 40˚C, 9843 ft. System memory 1 GB DRAM 256 MB flash Input power requirements AP1830: 44 to 57 VDC Power supply and power injector: 100 to 240 VAC; 50 to 60 Hz Power draw 15.4W Note: When deployed using a PoE specification, the power drawn from the power sourcing equipment will be higher by some amount, depending on the length of the interconnecting cable. Powering options 802.3af/802.3at Enhanced PoE Cisco local power supply, AIR-PWR-C= Cisco power injector, AIR-PWRINJ5= (Note:This injector supports 802.3af only), AIR-PWRINJ6= Note: If 802.3af PoE is the source of power, the USB port is disabled. Warranty Limited lifetime hardware warranty

The Ubiquiti UniFi AC offers simultaneous dual-band operation with 3x3 MIMO technology for each band. The UAP-AC has a range of up to 122 m (400 ft) and two Gigabit Ethernet ports. The Ubiquiti UniFi AC is the fastest UniFi model which supports 802.11ac and speeds of up to 1300 Mbps in the 5 GHz radio band and up to 450 Mbps in the 2.4 GHz radio band. Ubiquiti UniFi AP-AC (UAP-AC) Key features Frequency - 2.4 GHz, 5 GHz 2.4 GHz Throughput - 450 Mbps 5 GHz Throughput - 1300 Mbps Range - 122m/400 ft WiFi-Standards 802.11 a/b/g/n/ac Product Model Number: UAP-AC Contact: LHR: 04235784892 KHI: 02134710763 for more info visit: http://dreamsnw.com/uap-ac

The fastest UniFi model with speeds of up to 300 Mbps in the 5 GHz radio band and up to 450 Mbps in the 2.4 GHz radio band. The UAP-Pro offers simultaneous dual-band operation with 2x2 and 3x3 MIMO technology. It has a range of up to 400 ft and 2 Gigabit Ethernet ports. TX Output is 30dBm in the 2.4Ghz band and 22dBm in the 5.8Ghz band. Sleek wall or ceiling mount design (all accessories included). The UniFi AP uses a clean industrial design that seamlessly blends into typical environments. The AP's feature the latest in WiFi 802.11a/b/g/n MIMO technology. All accessories are included to mount the devices either on the wall or ceilings. Also included is Power Over Ethernet (POE) functionality which allows both power and data to be carried over a single Ethernet cable to the device. At the front-center of the device is a status LED ring which can provide the administrator with location tracking and alerts for each device. Contact: LHR: 04235784892 KHI: 02134710763, 02134711677, 02134721416

The fastest UniFi model with speeds of up to 300 Mbps in the 5 GHz radio band and up to 450 Mbps in the 2.4 GHz radio band. The UAP-Pro offers simultaneous dual-band operation with 2x2 and 3x3 MIMO technology. It has a range of up to 400 ft and 2 Gigabit Ethernet ports. TX Output is 30dBm in the 2.4Ghz band and 22dBm in the 5.8Ghz band. Sleek wall or ceiling mount design (all accessories included). The UniFi AP uses a clean industrial design that seamlessly blends into typical environments. The AP's feature the latest in WiFi 802.11a/b/g/n MIMO technology. All accessories are included to mount the devices either on the wall or ceilings. Also included is Power Over Ethernet (POE) functionality which allows both power and data to be carried over a single Ethernet cable to the device. At the front-center of the device is a status LED ring which can provide the administrator with location tracking and alerts for each device. Product Includes: • Wall and Ceiling Mount Adapter Kit • 48V Power Over Ethernet Adapter • UniFi Controller Software Installation CD http://dreamsnw.com/edge-switch-48-750w Avalaible at Dreams Network & Technology (Pvt) Ltd. Contact: info@dreamnw.com LHR: 04235784892 KHI: 02134710763, 02134711677, 02134721416