Ethernet cat

· Power supply: 9V DC · Cable type: RJ11 & RJ45 LAN cable. · Connectors: Ethernet Cat 5, 5e, Cat 6, Cat 7, RJ11 6P & RJ45 8P.

【Shielded from interference】 Made of 4 shielded twisted pair (STP) of copper wires with two RJ45 connectors on each end. Compared to the Cat 6 network Ethernet cable, the additional shielding and improved quality in twisting of the wires provides better protection from crosstalk, noise, and interference that can degrade the signal quality DESIGN FOR FEELING: The clip protector keeps the RJ45 connector from unwanted snags while routing the cable. 【Product Features】 1. Standard: Cat 7,SSTP; Meet TIA/EIA-568-B.2-10 Specfications,Backward compatible with Cat 5e / Cat 6 / Cat 6a Ethernet Cable 2. Conductor Construction: 8 wires Stranded Copper with shielding, much better than performance than copper clad aluminum (CCA) wire 3. Support bandwidth upto 600Mhz 4. Support speed up to 10Gbps 5. 28AWG, OD:6.3 mm 6. Gold Plated RJ45 connectors for optimized signal quality 7. 4PR UTP copper strands for minimal noise, interference & crosstalk 8. Tough, yet flexible PVC jacket & heavy-duty, snag-less mold 【10Gbps Speed and Multi-shielded Cable】 Ugreen Cat7 network Ethernet cable is capable of transmitting data at speed up to 10Gbps over 100m run of cable. It is made out of 4 shielded twisted pair (STP) of copper wires with two RJ45 connectors on each end. Compared to the Cat 6 network Ethernet cable, the additional shielding and improved quality in twisting of the wires provides better protection from crosstalk, noise, and interference that can degrade the signal quality. 【Universal Compatibility】 Ugreen Network Ethernet cables offer universal connectivity to computers and network components, such as routers, switches, hubs, network printers, game boxes and network attached storage devices, Xbox, PS2,PS3,Ps4 and game boxes whit RJ45 port. 【One-Sec Installation】 Plug-&-play: Ready to use, once each end is connected to a respective port on a compatible device

UGREEN Ethernet Cable CAT8 40Gbps 2000MHz CAT 8 Networking Nylon Braided Internet Lan Cord for Laptops PS 4 Router RJ45 Cable

UGreen Ethernet Lan Cable Blue 5M Price in Pakistan UGREEN Cat6 UTP Ethernet Network Cable Supports the fastest network transmission speeds determined by your Router / Switch. Get it in Pakistan same day* with Guarantee of being original. Network speed determined by factors other than just cables, like a router/switch box. • Also known as a network cable, computer cable, Category 5e cable, Ethernet cable, or Data/LAN cable. • Connects network components in a wired LAN at data transmission speeds up to 1 Gbps. • 26 AWG cable exceeds TIA/EIA standards & 250 MHz bandwidth. • 50-micron male RJ45 connectors per end, with corrosion-resistant gold plating. • 4PR UTP copper strands for minimal noise, interference & crosstalk, tough, yet flexible PC jacket and heavy-duty, snag-less mold. • Devices with RJ45 jacks, including computers & peripherals like routers, switch boxes, network printers & network attached storage devices. • Cat6 is a computer networking standard & works with 10/100 Base-T network. • Easy Installation: Plug-&-play: Ready to use, once each end connected to a respective port on a compatible device. • Compatible with router, desktop, notebook, switch, smart TV, TV box and printer. *UTP *Type: Cat 6 *Conductor: 26AWG copper clad aluminum *OD:6mm *Connection Type: RJ45 *Connector: pure copper plated with gold *Connection method: 568B *Ethernet Speed: 1000Mbps *Channel Bandwidth: 250MHz *Stranding method: 8-core twisted pair;Cross structure *Pass the American Fluke test *0-15M: Al-foil bag package *20-100M:color box package

UGreen Ethernet Lan Cable Blue 3M Price in Pakistan UGREEN Cat6 UTP Ethernet Network Cable Supports the fastest network transmission speeds determined by your Router / Switch. Get it in Pakistan same day* with Guarantee of being original. Network speed determined by factors other than just cables, like a router/switch box. • Also known as a network cable, computer cable, Category 5e cable, Ethernet cable, or Data/LAN cable. • Connects network components in a wired LAN at data transmission speeds up to 1 Gbps. • 26 AWG cable exceeds TIA/EIA standards & 250 MHz bandwidth. • 50-micron male RJ45 connectors per end, with corrosion-resistant gold plating. • 4PR UTP copper strands for minimal noise, interference & crosstalk, tough, yet flexible PC jacket and heavy-duty, snag-less mold. • Devices with RJ45 jacks, including computers & peripherals like routers, switch boxes, network printers & network attached storage devices. • Cat6 is a computer networking standard & works with 10/100 Base-T network. • Easy Installation: Plug-&-play: Ready to use, once each end connected to a respective port on a compatible device. • Compatible with router, desktop, notebook, switch, smart TV, TV box and printer. *UTP *Type: Cat 6 *Conductor: 26AWG copper clad aluminum *OD:6mm *Connection Type: RJ45 *Connector: pure copper plated with gold *Connection method: 568B *Ethernet Speed: 1000Mbps *Channel Bandwidth: 250MHz *Stranding method: 8-core twisted pair;Cross structure *Pass the American Fluke test *0-15M: Al-foil bag package *20-100M:color box package

UGreen Ethernet Lan Cable Blue 2M Price in Pakistan UGREEN Cat6 UTP Ethernet Network Cable Supports the fastest network transmission speeds determined by your Router / Switch. Get it in Pakistan same day* with Guarantee of being original. Network speed determined by factors other than just cables, like a router/switch box. • Also known as a network cable, computer cable, Category 5e cable, Ethernet cable, or Data/LAN cable. • Connects network components in a wired LAN at data transmission speeds up to 1 Gbps. • 26 AWG cable exceeds TIA/EIA standards & 250 MHz bandwidth. • 50-micron male RJ45 connectors per end, with corrosion-resistant gold plating. • 4PR UTP copper strands for minimal noise, interference & crosstalk, tough, yet flexible PC jacket and heavy-duty, snag-less mold. • Devices with RJ45 jacks, including computers & peripherals like routers, switch boxes, network printers & network attached storage devices. • Cat6 is a computer networking standard & works with 10/100 Base-T network. • Easy Installation: Plug-&-play: Ready to use, once each end connected to a respective port on a compatible device. • Compatible with router, desktop, notebook, switch, smart TV, TV box and printer. *UTP *Type: Cat 6 *Conductor: 26AWG copper clad aluminum *OD:6mm *Connection Type: RJ45 *Connector: pure copper plated with gold *Connection method: 568B *Ethernet Speed: 1000Mbps *Channel Bandwidth: 250MHz *Stranding method: 8-core twisted pair;Cross structure *Pass the American Fluke test *0-15M: Al-foil bag package *20-100M:color box package

Product Name:POE Injector / Splitter Data PIN:1/2,3/6 Power PIN:4/5+ & 7/8- Data in:Connects PC/HUB/Switch Dimensions:50mm*25mm*25mm Case of material:ABS 94V-0 Ethernet Data rate:10/100/1000 Mbp Ethernet Cable:TIA/EIA 568 Cat.5 Ethernet Cable Connector:RJ-45 Operating Temperature:0- 40 Degree Storage Temperature:-40-70 Degree Operating Humidity:10%to80% RH Storage Humidity:5%to90% RH

LAN Cable Length: 18-20 meters Length in feet: 60 feet CAT 6 UTP Cable Male to Male Ethernet Cable For Computer Networking/Internet etc.

LAN Cable Length: About 32.8 feet = 10 meters Cat 6 High-Speed Ethernet Cable Premium Fixed Connectors For Computer Networking/Internet etc.

LAN Cable Length: About 49 feet = 15 meters Cat 6 High-Speed Ethernet Cable Premium Fixed Connectors For Computer Networking/Internet etc.

Length About 4 feet (1.3 meters) Cat 6 High Speed Cable Fixed Premium Connectors

Length About 15 feet (4.5 meters) Cat 6 High Speed Cable Fixed Premium Connectors

Length About 60 feet (18 meters) Cat 6 High Speed Cable Fixed Premium Connectors

CAT6 HIGH PERFORMANCE STANDARD: The technology and function of this CAT6 unshielded keystone jack has higher performance than the TIA/EIA and ISO CAT6 standard, fits for patch panels, surface mount boxes or wall plates (face plates). HIGH QUALITY MATIRIAL & TECHNOLOGY - Gold plated contacts which prevent the oxidization and easy snap-in retaining clip ensure a secure and corrosion free connection. R0HS STANDARD: Supports T568A and T568B wiring with color coded 110 blocks. It Supports 110 or Krone dual type termination and accepts 22 or 26 AWG solid Ethernet cables. DOUBLE FEMALE RJ45 PLUG: This inline coupler connects two separate category 5e/6 cables (depending on type you bought) through a RJ45 keystone coupler. Double female cat6 keystone can be used with Cat.6, Cat5, CAT5e Ethernet cables. COMPACT DESIGN & MULTIFUNCTIONS: Keystone Snap-in Cat6 couplers provide a full range of solutions for voice, home networking, home office, audio, video and more. It works with any wallplates and blank patch panels.

LAN Cable Length: 10 Meters (About 30 feet) Cable For Ethernet LAN Cat-6 Cable

LAN Internet Cable Cat 6 High-Speed Ethernet Cable Premium Fixed Connectors For Computer Networking/Internet etc.

D-Link Solid Cables Are The Best Twisted-Pair Cables In The Market For Transmitting Data Over Local Area Networks (Lans). These Cables Exceed Performance Requirements Specified By The Tia/Eia-568b.2 / Tia/Eia-568c.2 And Iec 60603-7-4 Standards. Cat6 Patch Cable 100 Mbps Speed Snagless Cable Ethernet Transmission

Description: Details iShopping.pk brings you the best price for D-Link 100Base-TX to 100Base-FX Single-mode Fiber (SC) Media Converter (DMC-520SSC) with express shipping all over Pakistan.   Media converters  convert  signals  that  are  transmitted  from  one  type  of  media  to  another so that they can be transmitted over a different type of media. This series of media converters converts 10/100/1000 Mbps copper ethernet to a 100/1000 Mbps  fibre optic connection connection.This allows you to expand your network by connecting longer distance,cables between  devices  that  are  otherwise  connected with short distance Ethernet cables, such as Cat.6 twisted-pair cables   Specifications: Standards IEEE 802.3 for 10BASE-T/F IEEE 802.3u for 100BASE-TX/FX Data Transfer Rate Ethernet: 10 Mbps/20 Mbps (half-duplex/full-duplex) Fast Ethernet: 100 Mbps/200 Mbps (half-duplex/full-duplex) Duplex Mode Half-duplex/full-duplex Media Types 10BASE-T: 2-pair Cat. 3/4/5/5e, Unshielded Twisted Pair (UTP) (up to 100 m) 10/100BASE-TX: 2-pair Cat. 5/5e, Unshielded Twisted Pair (UTP) (up to 100 m) 100BASE-FX: Single mode-fi   e optic cable with SC connector (up to 20 km) Media Exchange Interface Auto-MDI/MDIX Transmission Mode Store-and-forward Forwarding Rate Full wire-speed forwarding rate Diagnostic LEDs Power Speed (for twisted pair ports) Full-duplex/Collision  LINK/ACT (for twisted pair ports)

Description: Details iShopping.pk brings you the best price for D-Link 10/100Mbps Single-Mode Media Converter (DMC-540SSC) with express shipping all over Pakistan.     Media converters  convert  signals  that  are  transmitted  from  one  type  of  media  to  another so that they can be transmitted over a different type of media. This series of media converters converts 10/100/1000 Mbps copper ethernet to a 100/1000 Mbps  fibre optic connection connection.This allows you to expand your network by connecting longer distance,cables between  devices  that  are  otherwise  connected with short distance Ethernet cables, such as Cat.6 twisted-pair cables.   Specificatiions: Number of Ports 1 x 10/100BASE-TX RJ-45 port  1 x 100BASE-FX SC port Standards  IEEE 802.3 for 10BASE-T/F  IEEE 802.3u for 100BASE-TX/FX Data Transfer Rate  Ethernet: 10 Mbps/20 Mbps (half- duplex/full-duplex) Fast Ethernet: 100 Mbps/200 Mbps (half-duplex/full-duplex) Duplex Mode Half-duplex/full-duplex Media Types 10BASE-T: 2-pair Cat. 3/4/5/5e, Unshielded Twisted Pair (UTP) (up to 100 m) 10/100BASE-TX: 2-pair Cat. 5/5e, Unshielded Twisted Pair (UTP) (up to 100 m)  100BASE-FX: Multi-mode fi    optic cable with SC connector (up to 40 km) Media Exchange Interface  Auto-MDI/MDIX Transmission Mode Store-and-forward Forwarding Rate Full wire-speed forwarding rate Diagnostic LEDs Power Speed (for twisted pair ports) Full-duplex/Collision (for twisted pair and fi                ports) LINK/ACT (for twisted pair ports) AC Input 5 V/1 A external power adapter Temperature Operating: 0 °C to 50 °C  Storage: -20 °C to 70 °C Humidity 5% to 90% RH, non-condensing Dimensions 95x 70 x 26 mm Fiber Wavelength 1310 nm Supported Fiber Cable Length Up to 40km Emission Certifi   tions (EMI) FCC

Description: Details iShopping.pk brings you the best price for TP-Link 10/100Mbps Multi-Mode Media Converter (DMC-300MSC) with express shipping all over Pakistan.     Media converters  convert  signals  that  are  transmitted  from  one  type  of  media  to  another so that they can be transmitted over a different type of media. This series of media converters converts 10/100/1000 Mbps copper ethernet to a 100/1000 Mbps  fibre optic connection connection.This allows you to expand your network by connecting longer distance,cables between  devices  that  are  otherwise  connected with short distance Ethernet cables, such as Cat.6 twisted-pair cables.   Specifications: Number of Ports 1 x 10/100BASE-TX RJ-45 port 1 x 100BASE-FX SC port Standards IEEE 802.3 for 10BASE-T/F IEEE 802.3u for 100BASE-TX/FX Data Transfer Rate Ethernet: 10 Mbps/20 Mbps (half-duplex/full-duplex) Fast Ethernet: 100 Mbps/200 Mbps (half-duplex/full-duplex) Duplex Mode Half-duplex/full-duplex Media Types 10BASE-T: 2-pair Cat. 3/4/5/5e, Unshielded Twisted Pair (UTP) (up to 100 m) 10/100BASE-TX: 2-pair Cat. 5/5e, Unshielded Twisted Pair (UTP) (up to 100 m) 100BASE-FX: Multi-mode fi   e optic cable with SC connector (up to 2 km) Media Exchange Interface Auto-MDI/MDIX Transmission Mode Store-and-forward Forwarding Rate Full wire-speed forwarding rate Diagnostic LEDs Power Speed (for twisted pair ports) Full-duplex/Collision   LINK/ACT (for twisted pair ports) AC Input     5 V/1 A external power adapter

RJ45 Meter Lan Cable Tester Internet Cable Tester Networking Cable tester Network Cable Meter Ethernet Cable Meter Cat5 Cat6 Cable Tester Network Tester Tool Networking cable tester to test networking line and telephone line cables. Cable connector type to test is RJ45,RJ11,RJ12 Ethernet cable type to test CAT 5/5e and CAT 6/6e Battery required 9V current supply 25mA This Ethernet cable tester switches into automatic scan mode to test the signals of cable. Network cable tester is easy to carry and ideal for site maintenance.

Description: Details iShopping.pk brings you the best price for D-Link 2 Port 100Base-TX to 100Base-FX Multi-mode Fiber (SC) Media Converter (DMC-300MSC) with express shipping all over Pakistan.   Specifications:   Number of Ports 1 x 10/100BASE-TX RJ-45 port 1 x 100BASE-FX SC port Standards IEEE 802.3 for 10BASE-T/F IEEE 802.3u for 100BASE-TX/FX Data Transfer Rate Ethernet: 10 Mbps/20 Mbps (half-duplex/full-duplex) Fast Ethernet: 100 Mbps/200 Mbps (half-duplex/full-duplex) Duplex Mode Half-duplex/full-duplex Media Types 10BASE-T: 2-pair Cat. 3/4/5/5e, Unshielded Twisted Pair (UTP) (up to 100 m) 10/100BASE-TX: 2-pair Cat. 5/5e, Unshielded Twisted Pair (UTP) (up to 100 m) 100BASE-FX: Multi-mode fi   e optic cable with SC connector (up to 2 km) Media Exchange Interface Auto-MDI/MDIX Transmission Mode Store-and-forward Forwarding Rate Full wire-speed forwarding rate Diagnostic LEDs Power Speed (for twisted pair ports) Full-duplex/Collision  LINK/ACT (for twisted pair ports) AC Input 5 V/1 A external power adapter  

Linksys WAP1200AC AC1200 Wi-Fi  The  Linksys WAP1200AC AC1200 Wi-Fi Access Point  is the latest in the AC-series access points, which utilizes the  Cross Band technology.  It can be used as a  Wireless Range Extender  or a  Wired Access Point.  Both functions maximize simultaneous use of the 2.4 GHz and 5 GHz bands for high-speed data transfer, uninterrupted streaming, and gaming.   Front Panel    Antenna positioning is done depending on the type of home you have. IMPORTANT:   The antennas are fixed and can  ONLY  rotate at  180 degrees.  Do  NOT  force the antennas too far back, otherwise, they will break. For  Single-story homes  -   Both antennas should be pointing  down. NOTE:   For illustration purposes, the Linksys RE6700 is used in this example. For  Multi-story homes  -  One (1)  antenna should  always be pointing down  to provide coverage for the current floor.  The second antenna (any antenna) should be positioned differently  depending  on where the Linksys WAP1200AC is located and where the coverage is needed. NOTE:   For the most part, position one (1) antenna at  45 degrees  as shown in  Position   A  below.  If there are issues with coverage, move the antenna at about  50-55 degrees  down as shown in  Position   B.    Position A  can be used if the Linksys WAP1200AC is in the  middle  of the house.   Position B  can be used if the Linksys WAP1200AC is connected to an outlet located at the  farther side  of the house.   Side Panel    Wi-Fi Protected Setup™ (WPS)  button – Uses the WPS technology to automatically and securely add wireless devices to your network.  Reset  button – Press and hold for  10 seconds  to reset the Linksys WAP1200AC to factory default settings.   Bottom Panel    ETHERNET  port – Connect an Ethernet-enabled device to the network using either a  Cat 5  or  6  Ethernet cable.   Product Features Concurrent dual-band (2.4 GHz and 5 GHz) 802.11ac Wireless technology Compatible with 802.11 a/b/g/n Data Rate of up to 300 Mbps for 2.4 GHz and up to 867 Mbps for 5 GHz Two (2)  external non-detachable antennas 2 x 2 Spatial Streams One (1)  10/100/1000 Fast Ethernet port with auto MDIX sensing Spot Finder technology (on Range Extender Mode only) Wi-Fi Protected Setup™ (WPS) Browser-based Setup (BBS) Cross Band technology  (on Range Extender Mode only) Beamforming technology LED Behaviors  Power / WPS LED: OFF  – There is no power on the Linksys WAP1200AC. Blinking Green   / Yellow  – The Linksys WAP1200AC is starting up, resetting to factory defaults, upgrading its firmware, or the WPS connection is in process. Solid Green   / Yellow  – The Linksys WAP1200AC is ready to use. Solid Amber   / Red  – There is a weak connection with the router. NOTE:   To fix this issue, unplug the Linksys WAP1200AC and move it closer to the router. Blinking Amber / Red  – The Linksys WAP1200AC is not connected to the router, or the WPS pairing failed. NOTE:   To fix this issue, make sure that your router has an active Internet connection and the Wi-Fi is turned ON.  If the router is working fine, unplug the Linksys WAP1200AC then move it closer to the router.  Plug it back in, wait for one (1) minute, and reconnect to your network.  Ethernet LED  –   It lights up solid  Green  when an Ethernet device is connected and active.  It will blink when sending or receiving data over the Ethernet port.   Product Requirements Wi-Fi enabled computers or mobile devices AC power outlet Ethernet router or switch with available RJ45 Ethernet port and RJ45 Cable for Access Point mode or wireless network for Range Extender mode For browser configuration: Internet Explorer® 8 or higher Safari® 5.1 for Mac® or higher Google Chrome™ 25.0 or higher Firefox® 20 or higher   

Description: Details iShopping.pk brings you the best price for D-Link 6-Port 10/100 Unmanaged PoE Switch (DES-F1006P-E) with express shipping all over Pakistan.   Details: Long-Distance Transmission with Surge Protection With a connectivity range of 250 meters, the DES-F1006P-E is ideal for surveillance deployments, and compatible with Cat.5e or Cat.6 copper cable, while 6kV surge protection helps this device withstand power fluctuations and lightning strikes.   Easy Deployment and PoE Convenience The DES-F1006P-E is a Plug-and-Play device that requires no configuration, so setup is simple and hassle-free. Easily connect multiple computers, share files, music, and video across your SOHO network, or even create a multiplayer gaming environment. 802.3x flow control on each port minimizes dropped packets when the port’s receiving buffer is full, giving a more reliable connection for all connected devices. The DES-F1006P-E also features four 10/100BASE-TX ports that support the IEEE 802.3af/at Power-over-Ethernet (PoE) protocol, supplying 15W each.   Diverse Operating Modes The DES-F1006P-E switch has three operating modes. The default mode has a transmission distance of 100 meters. VLAN mode prevents against DHCP deception, broadcast storms, and virus attacks. Extend mode supports an extra-long transmission distance of 250 meters at 10Mbps, and Quality-of-Service (QoS) mode customizes application priorities for uses such as Video.   Features: • 4 x 10/100 Mbps Fast Ethernet Ports •   2 x 10/100 Mbps Uplink Port •   Power-over-Ethernet (60W) •   Flow control for protection against data loss •   Maximum distance of 250m •   QoS Capabilities •   Surge protection (6kV) •   Operating Temperature: 0 to 40oC

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 128V Audio DSP Mixer with express shipping all over Pakistan.   The CONVERGE Pro 2 128V Audio DSP Mixer from ClearOne is a complete conferencing solution with 12 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in VoIP interface for 2 lines. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection. The mixer comes with built-in VoIP for VoIP conferencing. The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.   Features: Architecture • 12 mic/line inputs with AEC •  Built-in VoIP for 2 lines •  Built-in USB for PC-based conferencing Scalable Connectivity •  Standalone and daisy-chained system •  Stack up units up to 96 mic/line inputs •  Expansion bus C-Link with 64 channels •  P-Link bus to connect 6 peripherals Configuration & Management •  CONSOLE software •  Auto-discovery of devices •  Matrix View for entire system •  FlowView for visualized audio signal paths •  System monitoring and troubleshooting Audio Signal Processing •  Acoustic Echo Cancellation processing •  Distributed Echo Cancellation on every mic input •  Noise cancellation with Adaptive-Ambience •  Acoustic Intelligence with faster convergence •  DARE feedback elimination •  Microphone gating Flexible Control Options •  Dialer app for Windows, Mac, iOS, and Android •  Tabletop controller with a touch panel •  Wall controller with buttons •  Web-based controller Supports 3rd-party control modules   Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) VoIP Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation Audio: 5 lines (2 default + 3 lines through license), each line supporting 1+5 calls Sample Rate: 24 kHz Sample Bit Depth: 24-bit Codec: G.711 uLaw, G.711 ALaw, G.722 Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: Proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

• Great Performance: 150+ Mbps real outdoor throughput and up to 15km+ range. Typical range is 2-4 miles from a LOS tower running airMAX sector antenna's and Rocket M2's.  • Next-Gen Antenna Design: 11dBi dual-polarity gain with optimized cross-polarity isolation in a compact form-factor. • Dual Ethernet Connectivity: A secondary Ethernet port with software enabled POE output for seamless IP Video integration. • Intelligent POE: Remote hardware reset circuitry of NanoStation M allows for device to be reset remotely from power supply location.  • 802.3af 48V Compliant - Easily becomes 802.3af 48V compliant through use of Ubiquiti Instant 802.3af adapter. The adapter sold separately (SKU#I8023AF-OD or I8023AF-ID)  • Easy Installation - Easily mountable to a pole/mast with mounting straps provided. In addition, the NanoStation M2 can be mounted and adjusted in any direction in a 90 degree angle through the use the NanoBracket. The NanoBracket is sold separately (SKU# MT-NANO U) Product Includes • One (1) NanoStation 2.4GHz • One (1) Power Injector: 110-240VAC 24VDC 0.5A US-style plug • Mount and mounting strap (NanoBracket sold separately, SKU# MT-NANO U) Featuring a compact indoor/outdoor design and an interface, it is so intuitive even the most technically challenged can instantly become experts. But don't be fooled--it is as powerful as it is simple. NanoStation packs some phenomenal performance with a revolutionary design combining a high-gain antenna system, advanced radio architecture and highly researched and developed firmware technology allowing throughput, stability and capacity performance rivaling even the highest-end Wi-Max networks The NanoStation M2 makes a perfect CPE device when pared with the Ubiquiti Rocket M2 and airMAX Sector or a Dish Antenna. We also recommend to upgrade your AirOS software to the latest version by visiting UBNT Software Downloads. This device can also be used for short LOS PtP links by placing one unit in Access Point WDS Mode and the other unit into Station WDS. NSM2 Specifications • Processor Specs: Atheros MIPS 24KC, 400MHz • Frequency: 2.4Ghz Channels 1-11 (Channels 12-14 available in INTL version, contact sales@balticnetworks.com for ordering information) • Wireless: 2Ghz Atheros, 27dBm Adjustable down to 8dBm.,AES Encryption • Memory Information: 32MB SDRAM, 8MB Flash • Networking Interface: 2 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface, PoE Passthrough • Mount and mounting strap (NanoBracket is optional, sold separately) • Operating Temperature: -30C to +80C • Power Method: Passive PoE • Power Consumption: 8 Watts • Power supply included: Power Injector 110-240VAC 24VDC.5A US-style plug • Size: 29.4 cm x 8 cm x 3cm, Weight:.4kg • Approvals: FCC Part 15.247, IC RS210, CE • RoHS Compliance: YES Technical Information and Support: NanoStation M2 Data Sheet NanoStation Quick Start Guide airMAX CPE Quick Start Guide

Nanostation M5 5GHz 802.11a/n hi-power (27dBm) 2x2 MIMO airMAX TDMA PoE station. This is the ultimate 5Ghz wireless outdoor CPE with integrated 14dBi dual polarity antenna. Product Includes: • One (1) Nanostation M5 5.8GHz • One (1) Power Injector: 110-240VAC 24VDC 0.5A US-style plug.  • Mount and mounting strap (NanoBracket sold separately) Featuring a compact indoor/outdoor design and an interface, it is so intuitive even the most technically challenged can instantly become experts. But don't be fooled--it is as powerful as it is simple. NanoStation packs some phenomenal performance with a revolutionary design combining a high gain antenna system, advanced radio architecture and highly researched and developed firmware technology allowing throughput, stability and capacity performance rivaling even the highest-end WiMax networks The NanoStation M5 makes a perfect CPE device when pared with the Ubiquiti Rocket M5 and AirMax Sector or a Dish Antenna. We also recommend to upgrade your AirOS software to the latest version by visiting UBNT Software Downloads. This device can also be used for short LOS PtP links by placing one unit in Access Point WDS Mode and the other unit into Station WDS. NanoStation M5 Features: • Great Performance: 150+ Mbps real outdoor throughput and up to 15km+ range. Typical range is 2-4 miles from a LOS tower running airMAX sector antenna's and Rocket M5's.  • Next-Gen Antenna Design: 11dBi dual-polarity gain at 5GHz with optimized cross-polarity isolation in a compact form-factor. • Dual Ethernet Connectivity: A secondary Ethernet port with software enabled POE output for seamless IP Video integration. • Intelligent POE: Remote hardware reset circuitry of NanoStation M allows for device to be reset remotely from power supply location.  • 802.3af 48V Compliant - Easily becomes 802.3af 48V compliant through use of Ubiquiti Instant 802.3af adapter. The adapter sold separately (SKU#I8023AF-OD or I8023AF-ID)  • Easy Installation - Easily mountable to a pole/mast with mounting straps provided. In addition, the NanoStation M5 can be mounted and adjusted in any direction in a 90-degree angle through the use the NanoBracket. The NanoBracket is sold separately (SKU#MT-NANO U) NanoStation M5 Specifications: • Operating Frequency: 5170 - 5875 Mhz. NOTE: Only 5745-5825 Mhz is supported in the USA and Canada. It is the operator's responsibility to follow local country regulations including operation within legal frequency channels, output power, and Dynamic Frequency Selection (DFS) requirements. • Processor Specs: Atheros MIPS 24KC, 400MHz • Wireless: 5Ghz Atheros, 27dBm Adjustable down to 8dBm, AES Encryption • Memory Information: 32MB SDRAM, 8MB Flash • Networking Interface: 2 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface, PoE Passthrough • Mount and mounting strap (Nanobracket is optional, sold separately) • Operating Temperature: -30C to +80C • Power Method: Passive PoE • Power Consumption: 8 Watts • Power Supply (included): Power Injector 110-240VAC 24VDC.5A North American-style plug • Size: 29.4 cm x 8 cm x 3cm, Weight:.4kg • Approvals: FCC Part 15.247, IC RS210, CE • RoHS Compliance: YES Technical Information and Support: Nanostation M5 Data Sheet Nanostation Quick Start Guide AirMax CPE Quick Start Guide

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 48T Audio DSP Mixer with express shipping all over Pakistan.     The CONVERGE Pro 2 48T Audio DSP Mixer from ClearOne is a complete conferencing solution with 4 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in Telco interface for teleconferencing. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection.   The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.     Features: Architecture • 4 mic/line inputs with AEC •  Built-in Telco with ClearEffect processing •  Built-in USB for PC-based conferencing Scalable Connectivity •  Standalone and daisy-chained system •  Stack up units up to 96 mic/line inputs •  Expansion bus C-Link with 64 channels •  P-Link bus to connect 6 peripherals Configuration & Management •  CONSOLE software •  Auto-discovery of devices •  Matrix View for entire system •  FlowView for visualized audio signal paths •  System monitoring and troubleshooting Audio Signal Processing •  Acoustic Echo Cancellation processing •  Distributed Echo Cancellation on every mic input •  Noise cancellation with Adaptive-Ambience •  Acoustic Intelligence with faster convergence •  DARE feedback elimination •  Microphone gating Flexible Control Options •  Dialer app for Windows, Mac, iOS, and Android •  Tabletop controller with a touch panel •  Wall controller with buttons •  Web-based controller •  Supports 3rd-party control modules     Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Amplifier Output Speaker Output Port: Dual binding posts Audio: 2 x Channel Output Power: Maximum 10 W, 8 Ohms load Frequency Response: 20 Hz to 22 kHz @ +10 dBu, +/- 0.5 dBu THD + N: 20 Hz to 22 kHz @ +10 dBu, 1 W, Dynamic Range: 20 Hz to 22 kHz @ 20 dB, >102dB, with 20 kHz digital low pass filter Crosstalk: Channel to Channel, stimulus at 20 dBu, 10 W output to receptor 8⿦ load, 20 Hz to 22 kHz, Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 128T Audio DSP Mixer with express shipping all over Pakistan.   The CONVERGE Pro 2 128T Audio DSP Mixer from ClearOne is a complete conferencing solution with 12 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in Telco interface for teleconferencing. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection. The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.   Features: Architecture 12 mic/line inputs with AEC Built-in Telco with ClearEffect processing Built-in USB for PC-based conferencing Scalable Connectivity Standalone and daisy-chained system Stack up units up to 96 mic/line inputs Expansion bus C-Link with 64 channels P-Link bus to connect 6 peripherals Configuration & Management CONSOLE software Auto-discovery of devices Matrix View for entire system FlowView for visualized audio signal paths System monitoring and troubleshooting Audio Signal Processing Acoustic Echo Cancellation processing Distributed Echo Cancellation on every mic input Noise cancellation with Adaptive-Ambience Acoustic Intelligence with faster convergence DARE feedback elimination Microphone gating Flexible Control Options Dialer app for Windows, Mac, iOS, and Android Tabletop controller with a touch panel Wall controller with buttons Web-based controller Supports 3rd-party control modules   Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: Proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

Description: Details iShopping.pk brings you the best price for D-Link 16-Port Gigabit Managed Long Range PoE+ Surveillance Switch (DGS-F1210-18PS-E) with express shipping all over Pakistan.   Details: • Supports 16 Port Switch with 10/100/1000Mbps and 2 SFP Ports enables you to connect Power over Ethernet (PoE) devices. •   16 10/100/1000 Mbps gigabit ethernet ports •   2 SFP port •   150watts available PoE •   Flow control for protection against data loss •   The maximum distance of 250m •   Light protection (6kV) •   Operating Temperature: 0 to 40 deg C (32 to 104 deg F)   High Transmission distance With high distance connectivity, ideal for surveillance solution. Can be used with cat5e or cat6 cable.The DGS-F1018P-E features 16 ports 10/100BASE-TX ports that support the IEEE 802.3af/at PoE protocol. With a total power budget of 120W.   Plug & Play Installation The DGS-F1018P-E is a Plug-and-Play device that requires no configuration, so setup is simple and hassle-free, and you can easily connect multiple computers, share files, music, and video across your home or small office network, or even create a multiplayer gaming environment. 802.3x flow control on each port minimizes dropped packets when the port’s receiving buffer is full, giving you a more reliable connection for all of your connected devices.   Different Switch working mode • The DGS-F1018P-E switch works in 4 operating modes using the DIP switch •   VLAN: Isolating ports 1-16 from each other can effectively suppress network storms and improve network performance •   EXTEND: Supports 250meters long-distance power supply (recommended cat 5 or above) •   PoE: Automatic detection power of port, power off and restart the device if find PD device crash •   QoS: Prioritize the identified video data to make video transmission smoother