Emi power

GAME IN STYLE The MPG series brings out the best in gamers by allowing full expression in color with advanced RGB lighting control and synchronization. Experiment on another level of personalization with a front LED strip that provides convenient in-game and real time notifications. With the MPG series, transform your equipment into the center of attention and top leaderboards in style.     MPG Z490 GAMING EDGE WIFI Premium thermal solution   Aluminum Cover All-metal extended heatsink cover enlarges the surface of heat dissipation, ensuring even high-end processors to run in full speed. M.2 Shield Frozr Strengthened built-in M.2 thermal solution. Keeps M.2 SSDs safe while preventing throttling, making them run faster. Pump Fan Support Control watercooling pump speeds for best flow and noise control. Heatsinks with 7W/mK Thermal Pad 7W/mK thermal pad provides better heat transfer to the heatsink   MPG Z490 GAMING EDGE WIFI HIGH-SPEED TRANSMISSION   Lightning 20G Built-in USB 3.2 Gen 2x2 port, offers the 20Gbps transmission speed, 4X faster than USB 3.2 Gen 1. Intel Wi-Fi 6 The latest wireless solution supports MU-MIMO and BSS color technology, delivering speeds up to 2400Mbps. 2.5G Network Solution Featuring premium 2.5G LAN with LAN manager delivers better network experience. DDR4 Boost The fully isolated DDR circuit to deliver pure data signals for the best gaming and overclocking performance. Twin Turbo M.2 With 2 x M.2 slots. Running at PCI-E Gen3 x4 maximizes performance for NVMe based SSDs.   MPG Z490 GAMING EDGE WIFI EXCLUSIVE FEATURE   Core Boost Technology Combining 8+4 pin power connectors and premium layout design, that is ready for unleashing the maximum performance. 6-Layer PCB 6 layer PCB provides higher performance and long-lasting system stability without any compromise. Digital PWM Highest quality component digital power IC makes sure your system runs smoothly under the most extreme conditions. PCI-E Steel Armor Protecting VGA cards against bending and EMI for better performance, stability and strength.   MPG Z490 GAMING EDGE WIFI premium thermal solution   Aluminum Cover All-metal extended heatsink cover enlarges the surface of heat dissipation, ensuring even high-end processors to run in full speed. M.2 Shield Frozr Strengthened built-in M.2 thermal solution. Keeps M.2 SSDs safe while preventing throttling, making them run faster. Pump Fan Support Control watercooling pump speeds for best flow and noise control. Heatsinks with 7W/mK Thermal Pad 7W/mK thermal pad provides better heat transfer to the heatsink   MPG Z490 GAMING EDGE WIFI HIGH-SPEED TRANSMISSION   Lightning 20G Built-in USB 3.2 Gen 2x2 port, offers the 20Gbps transmission speed, 4X faster than USB 3.2 Gen 1. Intel Wi-Fi 6 The latest wireless solution supports MU-MIMO and BSS color technology, delivering speeds up to 2400Mbps. 2.5G Network Solution Featuring premium 2.5G LAN with LAN manager delivers better network experience. DDR4 Boost The fully isolated DDR circuit to deliver pure data signals for the best gaming and overclocking performance. Twin Turbo M.2 With 2 x M.2 slots. Running at PCI-E Gen3 x4 maximizes performance for NVMe based SSDs.   MPG Z490 GAMING EDGE WIFI EXCLUSIVE FEATURE   Core Boost Technology Combining 8+4 pin power connectors and premium layout design, that is ready for unleashing the maximum performance. 6-Layer PCB 6 layer PCB provides higher performance and long-lasting system stability without any compromise. Digital PWM Highest quality component digital power IC makes sure your system runs smoothly under the most extreme conditions. PCI-E Steel Armor Protecting VGA cards against bending and EMI for better performance, stability and strength.   MPG Z490 GAMING EDGE WIFI premium thermal solution   Aluminum Cover All-metal extended heatsink cover enlarges the surface of heat dissipation, ensuring even high-end processors to run in full speed. M.2 Shield Frozr Strengthened built-in M.2 thermal solution. Keeps M.2 SSDs safe while preventing throttling, making them run faster. Pump Fan Support Control watercooling pump speeds for best flow and noise control. Heatsinks with 7W/mK Thermal Pad 7W/mK thermal pad provides better heat transfer to the heatsink PREMIUM HARDWARE DESIGN With years of experience, MSI is no stranger to building high-performance motherboards. Our R&D and engineering teams have reviewed countless designs, evaluated a wide selection of high quality components, and developed products for reliability even under extreme conditions.   THERMAL SOLUTION FOR MORE CORES AND HIGHER PERFORMANCE With more cores’ processors, thermal and power design is more important to make sure the temperature keeps lower. MSI extended PWM heatsink and enhanced circuit design ensures even high-end CPU to run in full speed with MSI motherboards. M.2 SHIELD FROZR World’s fastest SSDs can start to lower performance when getting hot. Part of the motherboards heatsink design, M.2 SHIELD FROZR is the next generation M.2 thermal solution to avoid this by offering the best thermal protection to make sure that SSD maintains maximum performance. With MSI M.2 Shield FROZR - Prevents throttling - Maximizes drive performance - Higher maximum SSD speeds      

D-Link (DES-1005P) 5-Port 10/100 Base-TX with 1 Port POE Unmanaged Switch Overview The D-Link DES-1005P 5-Port 10/100 Switch with 4 PoE Ports enables you to connect Power over Ethernet (PoE) devices such as wireless access points (APs), IP cameras, and IP phones to the network. Built with home and small business users in mind, the DES-1005P is compact and operates silently, making it ideal for most rooms and offices. Power over Ethernet The DES-1005P features four 10/100BASE-T ports that support the IEEE 802.3af and IEEE 802.3at PoE protocols, supplying up to 30 W on each PoE port and providing a total power budget of 60 W. You can connect compatible devices to the DES-1005P without using an additional power supply. This allows you to save on cabling and to install devices in locations without immediate access to power outlets. High Performance The DES-1005P features plug-and-play installation and requires no configuration. Auto MDI/MDI-X support on all ports removes the need for crossover cables when connecting to another switch or hub, and auto-negotiation on each port intelligently adjusts the port speed for compatibility with the connected device. With wire-speed filtering and store-and-forward switching, the DES-1005P maximizes network performance while minimizing the transmission of bad network packets. Green Technology The DES-1005P features green technology such as IEEE 802.3az Energy-Efficient Ethernet (EEE), link status detection, and cable length detection. EEE adjusts the power consumption of the switch based on network utilization, reducing the cost of ownership during periods of inactivity. Link status detection powers down ports when no links are detected, saving power when connected devices are shut down or disconnected. Cable length detection adjusts the power output of the port based on the cable length, reducing the power requirements of the switch. Compact and Silent The compact design of the DES-1005P allows placement in most locations, including those where space is at a premium. The desktop form factor provides everything you need to set up a new network or expand an existing network, while the fanless design ensures silent operation even in noise-sensitive areas such as workstations and meeting rooms. Technical Specifications General Hardware version = B1 Size  • Desktop Interfaces  • 5 10/100BASE-T ports Standards  • IEEE 802.3 10BASE-T Ethernet (twisted-pair copper) • IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper) • ANSI/IEEE 802.3 NWay auto-negotiation • IEEE 802.3x flow control • IEEE 802.1p QoS Media Interface Exchange  • Auto MDI/MDI-X adjustment on all ports Performance Switching Fabric  • 1 Gbps Transmission Method  • Store-and-forward Data Transfer Rates  • Fast Ethernet      • 100 Mbps (half-duplex)      • 200 Mbps (full-duplex) • Ethernet      • 10 Mbps (half-duplex)      • 20 Mbps (full-duplex) Packet Filtering / Forwarding Rates  • 0.744 Mpps MAC Address Table  • 2K entries per device RAM Buffer  • 64 KB per device PoE PoE Standards  • IEEE 802.3af  • IEEE 802.3at PoE-Capable Ports  • Ports 1 to 4 Power Budget  • 60 W (30 W max. per PoE port) LEDs • Power / PoE Max (per unit) • Power / Status (per port) • Activity / Link and Speed (per port) Physical Weight  • 0.26 kg (9.17 oz) Dimensions  • 100 x 98 x 28 mm (3.94 x 3.86 x 1.10 in) DC Input  • External 53.5 V / 1.2 A power adapter Power Consumption  • 63.26 W maximum (PoE on) • 3.61 W maximum (PoE off) • 0.68 W (standby) Temperature  • Operating: 0 to 40 ˚C (32 to 104 ˚F)  • Storage: -10 to 70 ˚C (-40 to 158 ˚F) Humidity  • Operating: 0% to 95% RH non-condensing  • Storage: 0% to 95% RH non-condensing Certifications Safety  • cUL • CB • LVD • BSMI EMI/EMC  • CE • BSMI • FCC • VCCI • RCM

Description: Details iShopping.pk brings you the best price for Cisco Wireless-AC Dual Radio Wave 2 Access Point with 2.5GbE LAN Data Sheet (WAP581-E-K9) with 1 year official warranty and express shipping all over Pakistan   Features: ● Concurrent dual-band radio support offers up to 2.1 Gbps on a 5.0-GHz radio and 600 Mbps on a 2.4-GHz radio to use capacity and coverage most efficiently. ● Robust security, including WPA2, 802.1X with RADIUS secure authentication, and rogue access point detection, help protect sensitive business information. ● Wi-Fi Scheduler allows you to control your Wi-Fi network access during business and non-business hours. ● An integrated Wireless Packet Capture tool assists tech support in troubleshooting. ● Intelligent QoS prioritizes network traffic to help keep critical network applications running at top performance. ● Support for power-saving sleep mode and port control features help increase energy efficiency. ● Workgroup Bridge mode lets you expand your network by wirelessly connecting to a second Ethernet network. ● Support for IPv6 lets you deploy future networking applications and operating systems without costly upgrades. ● Sleek design with multiple internal antennas and a versatile mounting kit allows for installation on a ceiling, wall or desktop. ● Offers limited lifetime hardware warranty provides peace of mind.   Specifications: Standards IEEE 802.11ac, 802.11a, 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (spanning tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), and IPv6 (RFC 2460) Cabling type Category 5e or better Antennas Internal antennas optimized for installation on a wall or ceiling Operating system Linux Software Physical Interfaces Ports 2 GE ports - one 2.5G and second one 10/100/1000 Ethernet, with support for 802.3at at PoE; support is only for port 1 Buttons Reset button Lock slot Slot for Kensington lock LEDs One multifunction LED Physical Specifications Physical dimensions 1.5 x 9.0 x 9.0 in. (38x 229 x 229 mm) (H x W x D) Weight 3 lb (1.4kg) Network Capabilities VLAN support Yes Number of VLANs 1 management VLAN plus 32 VLANs for SSIDs 802.1X supplicant Yes Service Set Identifier (SSID)-to-VLAN mapping Yes Auto-channel selection Yes Spanning tree Yes Load balancing Yes IPv6 Yes ●  IPv6 host support ●  IPv6 RADIUS, syslog, and Network Time Protocol (NTP) Layer 2 802.1Q-based VLANS, 32 active VLANS plus 1 management VLAN Security W-Fi Protected Access (WPA) and WPA2 Yes, including enterprise authentication Access control Yes, management access control list (ACL) plus MAC ACL Secure management Secure HTTP (HTTPS) SSID broadcast Yes Rogue access point detection Yes Mounting and Physical Security Multiple mounting options Mounting bracket included for easy ceiling or wall mounting Physical security lock Kensington lock slot Quality of Service QoS Wi-Fi Multimedia and Traffic Specification (WMM TSPEC) and client QoS Performance Wireless throughput Up to 2.8-Gbps data rate (real-world throughput varies) Recommended user support Up to 200 connective users; 50 active users per radio Multiple Access Point Management Single Point Setup Yes Number of access points per cluster 16 Active clients per cluster 960 Configuration Web user interface Built-in web user interface for easy browser-based configuration (HTTP and HTTPS) Management Management protocols Web browser, Simple Network Management Protocol (SNMP) v3, and Bonjour Remote management Yes Event logging Local, remote syslog, and email alerts Network diagnostics Logging and packet capture Web firmware upgrade Firmware upgradable through web browser; imported or exported configuration file Dynamic Host Configuration Protocol (DHCP) DHCP client IPv6 host Yes HTTP redirect Yes Wireless Frequency Dual concurrent radios (2.4 and 5 GHz) Radio and modulation type Dual radio, orthogonal frequency division multiplexing (OFDM) IEEE 802.11a/n: OFDM (BPSK/QPSK/16QAM/64QAM/256QAM) IEEE 802.11ac: OFDM (BPSK/QPSK/16QAM/64QAM/256QAM) WLAN 802.11n/ac 4 x 4 MU-MIMO at 5 GHz and 3 x 3 MIMO on 2.4 GHz 21 for 20-MHz bandwidth; 9 for 40-MHz bandwidth; 4 for 80-MHz bandwidth 11 for 20-MHz bandwidth; 7 for 40-MHz bandwidth 802.11 dynamic frequency selection (DFS) Data rates supported IEEE 802.11b: DSSS (1/2/5.5/11) IEEE 802.11g: OFDM (6/9/12/18/24/36/48/54) IEEE 802.11n: Refer to the entries for this standard later in this list) IEEE 802.11b: 12.94 MHz IEEE 802.11g: 24.49 MHz EEE 802.11n MCS0 (HT20): 27.44 MHz IEEE 802.11n MCS0 (HT40): 36.18 MHz IEEE 802.11b: 29.76 dBm IEEE 802.11g: 29.24 dBm IEEE 802.11n MCS0 (HT20): 29.25 dBm IEEE 802.11n MCS0 (HT40): 23.81 dBm Frequency band and operating channels Frequency Band Channel No. Frequency Channel No. Frequency 2400~2483.5MHz 1 2412 MHz 7 2442 MHz 2 2417 MHz 8 2447 MHz 3 2422 MHz 9 2452 MHz 4 2427 MHz 10 2457 MHz 5 2432 MHz 11 2462 MHz 6 2437 MHz - - Frequency Band Channel No. Frequency Channel No. 5150- to 5250-MHz Band 1 36 5180 MHz 44 38 5190 MHz 46 40 5200 MHz 48 42 5210 MHz - 52 5260 MHz 60 54 5270 MHz 62 5250- to 5350-MHz Band 2 56 5280 MHz 64 58 5290 MHz - 100 5500 MHz 112 102 5510 MHz 116 104 5520 MHz 132 5470- to 5725-MHz Band 3 106 5530 MHz 134 108 5540 MHz 136 110 5550 MHz 140 149 5745 MHz 157 151 5755 MHz 159 5725- to 5850-MHz Band 4 153 5765 MHz 161 155 5775 MHz 165 Transmitted output power Transmitted Output Power: 2.4 GHz ●  802.11b: 20.0 +/– 1.5 dBm @ CH6, all rates ●  802.11g: 20.0 +/– 1.5 dBm@ CH6, 6 Mbps ●  802.11g: 17.0 +/– 1.5 dBm@ CH6, 54 Mbps ●  802.11n(HT20): 20.0 +/– 1.5 dBm@ CH6, MCS0 ●  802.11n(HT20): 17.0 +/– 1.5 dBm@ CH6, MCS7 ●  802.11n(HT40): 16.0 +/– 1.5 dBm@ CH6, MCS7 5-GHz UNII-1 (5150~5250 MHz) ●  802.11a: 22.0 +/– 2 dBm @ 6 Mbps ●  802.11a: 20.0 +/– 2 dBm @ 54 Mbps ●  802.11ac(VHT20): 22.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT20): 14.0 +/– 2 dBm @ MCS8 ●  802.11ac(VHT40): 21.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT40): 14.0 +/– 2 dBm @ MCS9 ●  802.11ac(VHT80): 20.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT80): 14.0 +/– 2 dBm @ MCS9 5-GHz UNII-2 (5250–5350 MHz)/UNII-2 Extended (5470–5725 MHz) ●  802.11a: 22.0 +/– 2 dBm @ 6 Mbps ●  802.11a: 20.0 +/– 2 dBm @ 54 Mbps ●  802.11ac(VHT20): 22.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT20): 14.0 +/– 2 dBm @ MCS8 ●  802.11ac(VHT40): 21.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT40): 14.0 +/– 2 dBm @ MCS9 ●  802.11ac(VHT80): 20.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT80): 14.0 +/– 2 dBm @ MCS9 5GHz UNII-3 (5725~5850MHz) ●  802.11a: 22.0 +/– 2 dBm @ 6 Mbps ●  802.11a: 20.0 +/– 12 dBm @ 54 Mbps ●  802.11ac(VHT20): 22.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT20): 14.0 +/– 2 dBm @ MCS8 ●  802.11ac(VHT40): 21.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT40): 14.0 +/– 2 dBm @ MCS9 ●  802.11ac(VHT80): 20.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT80): 14.0 +/– 2 dBm @ MCS9 Wireless isolation Wireless isolation between clients External antennas None Internal antennas 4 Internal fixed PIFA antenna Antenna gain in dBi 3.61 dBi @2.4 GHz; 6.23 dBi @5 GHz Receiver sensitivity 2.4 GHz ●  802.11b: –86 dBm @ 11Mbps ●  802.11g: –73 dBm @ 54 Mbps ●  802.11n(HT20): –71 dBm @ MCS7 ●  802.11n(HT40): –67 dBm @ MCS7 5GHz ●  802.11a: –90 dBm @ 6 Mbps ●  802.11a: –74 dBm @ 54 Mbps ●  802.11ac(VHT20): –66 dBm @ MCS8 ●  802.11ac(VHT40): –62 dBm @ MCS9 ●  802.11ac(VHT80): –58 dBm @ MCS9 Wireless distribution system (WDS) Yes Fast roaming Yes Multiple SSIDs 16 per radio Wireless VLAN map Yes WLAN security Yes Wi-Fi Multimedia (WMM) Yes, with unscheduled automatic power save Operating Modes Access point Access point mode, Wireless Domain Services (WDS) bridging, and Workgroup Bridge mode Environmental Power options IEEE 802.3at/af Ethernet switch Cisco power injector: SB-PWR-INJ2-xx Cisco power adapter: SB-PWR-48v-xx Peak power: 18 watts Compliance Safety: ●  UL 60950-1 ●  CAN/CSA-C22.2 No. 60950-1 ●  IEC 60950-1 ●  EN 60950-1 Radio approvals: ●  FCC Part 15.247, 15.407 ●  RSS-210 (Canada) ●  EN 300.328, EN 301.893 (Europe) ●  AS/NZS 4268.2003 (Australia and New Zealand) EMI and susceptibility (Class B): ●  FCC Part 15.107 and 15.109 ●  ICES-003 (Canada) ●  EN 301.489-1 and -17 (Europe) Operating temperature 32 to 104°F) (0 to 40°C) Storage temperature –4 to 158°F (–20 to 70°C) Operating humidity 10 to 85% noncondensing Storage humidity 5 to 90% noncondensing System memory 256-MB RAM 128-MB flash

Description: Details iShopping.pk brings you the best price for D-Link Single-Mode Media Converter (DMC‑810SC) with express shipping all over Pakistan.   Details:   This Media Converter can be used by itself or installed in a chassis and converts between 1000BASE-T Gigabit twisted-pair signals to 1000BASE-LX Gigabit single-mode fibre signals. The DMC-810SC converts 1000BASE-T Gigabit twisted-pair signals to 1000BASE-LX Gigabit single-mode fibre signals. Maximum fibre cable distance is 200 km. 1 RJ-45 port and 1 fibre port (SC type connector) are provided. The DMC-700SC can be used as stand-alone device or as a module installed in the DMC-1000 chassis. The media converter is housed in a solid metal case and comes with status LEDs and an external AC power adapter. If you install it in the DMC-1000 chassis, remove its metal case and slide its PC board into an open slot in chassis. In this application, the chassis provides power for all media converters inside it, and the media converter’s own external AC power adapter will not be necessary.   Specifications: LED Indicators Power (PWR) LINK/ACT Dimensions 120 x 88 x 25 mm Power Input 7.5V 1.5A Through external AC power adapter Operating Temperature 0° - 40° C Storage Temperature -25° -  70° C Humidity 10  ~  90% non-condensing   Emission (EMI) FCC Class B VCCI Class B CE Class B C-Tick

  Compliance with Intel ATX 12V 2.3 & SSI EPS 12V 2.92 standards. 80 PLUS Gold certified – extreme efficiency PSU series with 87-93% efficiency @ 20-100% load to cut down electric cost. 24/7 @ 50℃: Guaranteed to deliver 1275W continuous power even in the worst chassis conditions up to 50℃ internal chassis temperature. S.P.T. Indicator: PSU status monitor with 3-mode LED (standby / PG signal / temperature) will let you know if there's a problem before it becomes a bigger problem or even ceases function. High quality 105°C Japanese capacitors: ensure superb performance and reliability. 105°C Solid state capacitors: great stability at higher operating temperatures, frequencies and currents. Full Bridge & LLC resonance circuit with DC-DC module for extremely stable performance & reliability Interleaved PFC circuit provides extremely high PF value and high PSU efficiency. Smart Fan Control system optimize the thermal performance and minimize audible noise. High current massive +12V rails: robust dual +12V rails design providing up to 45A for 12V1 & 65A for 12V2. This ensures there is plenty of power on demand and ready for any need. Heavy-gauge 16 AWG High Current cable at PCI-Express connectors reduce conducted resistance, increasing efficiency and improving power delivery ensuring your high performance graphics cards get the power they need when they need it! Multi-GPU ready: 8 x PCI-E connectors support up to 4-way ATI CrossFireX™ & Nvidia SLI™. Auto switching circuitry for universal AC input from 90-264V. Heavy-duty protection circuitry of Over Current, Over Power, Over Voltage, Under Voltage, and Short-Circuit protection. Helps protect your components should a problem arise. Safety / EMI Approvals: CE, TUV, FCC, UL, CUL, GOST and BSMI certified.    

Product Description           Coolermaster Masterwatt Lite 400W 80 Plus Lighten the Load Power on. We want the MasterWatt Lite Series to be that simple. In the box are all the essentials of a reliable engine so you don't have to think about it. We added higher-end perks like Active PFC and PWM technology for more stability, and made sure we met ErP 2013 and CE ratings for safety and low energy impact. It's the survival kit for reliable, affordable power. Advanced Circuit Design Active PFC + PWM combined with dual forward topology and double EMI filter enhances power output efficiency and increases the performance and stability of your system. Silent and Durable Fan Cooler Master's 120mm HDB temperature control fan can operate more smoothly without friction, which makes it quiet and more durable. Green Power Compliant with ErP 2013 Lot6, which guarantees that your PSU will use less than 0.5W on system standby and lower than 45% transferring efficiency on 5V standby. Safety Guardian Full protection (OCP/OVP/SCP/OPP) with built-in Over Temperature Protection (OTP). Minimizes the risk of damage from power outages.

Description: Details iShopping.pk brings you the best price for D-Link 10/100Base-TX to 100Base-FX Single-mode Fiber (SC) Media Converter (DMC-920T/E) with express shipping all over Pakistan.   Specifications: LED Indicators Power 100Mbps Speed (for twisted-pair port) Full Duplex/Collision (for twisted-pair and fiber ports) LINK/ACT (for twisted-pair port) Dimensions 120 x 88 x 25 mm Power Input 7.5V 1.5A Through external AC power adapter Operation Temperature 0° – 40° C Storage Temperature -25° – 70° C Humidity 10 ~ 90% non-condensing Emission (EMI) FCC Class B VCCI Class B CE Class B C-Tick   Details: This media Converter combines transmit and receive signals onto one fibre strand using two wavelengths. This design avoids the budget losses incurred by the single-wavelength single-fiber technology and minimizes the possibility of reflections in the system. The units on both ends of a link are different. One module uses one wavelength to transmit and a second wavelength to receive, while the other module flips that relationship. For this reason, these units are used in pairs. A pair of a one-channel single fiber is used for media conversion between 10/100BASE-TX and 100BASE-FX. Two different transmitting wavelengths, one wavelength with bi-directional for both transmit and receive. – DMC-920R: This media converter provides 1310 micron for TX, 1550 micron for RX. – DMC-920T: This media converter provides 1550 micron for TX, 1310 micron for RX. Fiber cable support is 9/125um, 10/125um single-mode fiber, maximum 20 km cable distance

Description: Details iShopping.pk brings you the best price for D-Link Single-Mode Media Converter (DMC-920T/E) with express shipping all over Pakistan.   Specifications: LED Indicators Power 100Mbps Speed (for twisted-pair port) Full Duplex/Collision (for twisted-pair and fiber ports) LINK/ACT (for twisted-pair port) Dimensions 120 x 88 x 25 mm Power Input 7.5V 1.5A Through external AC power adapter Operation Temperature 0° – 40° C Storage Temperature -25° – 70° C Humidity 10 ~ 90% non-condensing Emission (EMI) FCC Class B VCCI Class B CE Class B C-Tick   Details: This media converter combines transmit and receive signals onto one fibre strand using two wavelengths. This design avoids the budget losses incurred by the single-wavelength single-fiber technology and minimizes the possibility of reflections in the system. The units on both ends of a link are different. One module uses one wavelength to transmit and a second wavelength to receive, while the other module flips that relationship. For this reason, these units are used in pairs. A pair of a one-channel single fiber is used for media conversion between 10/100BASE-TX and 100BASE-FX. Two different transmitting wavelengths, one wavelength with bi-directional for both transmit and receive. DMC-920R: This media converter provides 1310 micron for TX, 1550 micron for RX. DMC-920T: This media converter provides 1550 micron for TX, 1310 micron for RX. Fiber cable support is 9/125um, 10/125um single-mode fiber, maximum 20 km cable distance.  

MPG Z590 GAMING PLUS Supports 11th and 10th Gen Intel ®  Core™ / Pentium ®  Celeron ®  processors for LGA 1200 socket Supports DDR4 Memory, up to 5333(OC) MHz Lightning Fast Game experience: PCIe 4.0, Lightning Gen 4 x4 M.2, USB 3.2 Gen 2x2 Enhanced Power Design: 14+1+1 Duet Rail Power System, dual 8-pin CPU power connectors, Core Boost, DDR4 Boost Premium Thermal Solution: Enlarged heatsink with heat-pipe, MOSFET thermal pads rated for 7W/mK, additional choke thermal pads and 3x M.2 Shield Frozr are built for high performance system and non-stop gaming experience MYSTIC LIGHT: 16.8 million colors / 29 effects controlled in one click. MYSTIC LIGHT EXTENSION supports both RGB and RAINBOW LED strip. 2.5G LAN with LAN Manager: Upgraded network solution for professional and multimedia use. Delivers a secure, stable and fast network connection AUDIO BOOST 5: Reward your ears with studio grade sound quality for the most immersive gaming experience High Quality PCB: 6-layer PCB made by 2oz thickened copper and server grade level material Pre-installed I/O Shield: Better EMI protection and more convenience for installation

Description: Details iShopping.pk brings you the best price for D-Link 10/100Mbps Single-Mode Media Converter (DMC-540SSC) with express shipping all over Pakistan.     Media converters  convert  signals  that  are  transmitted  from  one  type  of  media  to  another so that they can be transmitted over a different type of media. This series of media converters converts 10/100/1000 Mbps copper ethernet to a 100/1000 Mbps  fibre optic connection connection.This allows you to expand your network by connecting longer distance,cables between  devices  that  are  otherwise  connected with short distance Ethernet cables, such as Cat.6 twisted-pair cables.   Specificatiions: Number of Ports 1 x 10/100BASE-TX RJ-45 port  1 x 100BASE-FX SC port Standards  IEEE 802.3 for 10BASE-T/F  IEEE 802.3u for 100BASE-TX/FX Data Transfer Rate  Ethernet: 10 Mbps/20 Mbps (half- duplex/full-duplex) Fast Ethernet: 100 Mbps/200 Mbps (half-duplex/full-duplex) Duplex Mode Half-duplex/full-duplex Media Types 10BASE-T: 2-pair Cat. 3/4/5/5e, Unshielded Twisted Pair (UTP) (up to 100 m) 10/100BASE-TX: 2-pair Cat. 5/5e, Unshielded Twisted Pair (UTP) (up to 100 m)  100BASE-FX: Multi-mode fi    optic cable with SC connector (up to 40 km) Media Exchange Interface  Auto-MDI/MDIX Transmission Mode Store-and-forward Forwarding Rate Full wire-speed forwarding rate Diagnostic LEDs Power Speed (for twisted pair ports) Full-duplex/Collision (for twisted pair and fi                ports) LINK/ACT (for twisted pair ports) AC Input 5 V/1 A external power adapter Temperature Operating: 0 °C to 50 °C  Storage: -20 °C to 70 °C Humidity 5% to 90% RH, non-condensing Dimensions 95x 70 x 26 mm Fiber Wavelength 1310 nm Supported Fiber Cable Length Up to 40km Emission Certifi   tions (EMI) FCC

  Product Description:    Support the latest ATX 12V V2.3 & EPS 12V standards. High current & single +12V rail provides superior performance.  Ultra-quiet 120mm cooling fan delivers excellent airflow at an exceptionally low noise level. Active PFC with Universal AC input.  Supports multiple core high-end graphic cards & CPU. (NVIDIA SLI & ATI CrossFire Ready)  Dimension: 150mm(W)x86mm(H)x140mm(D).  High reliability: MTBF>100,000 hours. Heavy-duty protection circuitry of Over Current, Over Voltage, Over Power and Short-Circuit protections. Safety / EMI Approvals: UL/CUL/FCC certification.    

Supports 10th Gen Intel Core / Pentium Celeron processors for LGA 1200 socket Supports DDR4 Memory, up to 2933MHz Core Boost: With premium layout and digital power design to support more cores and provide better performance. DDR4 Boost: Advanced technology to deliver pure data signals for the best performance and stability. Steel Armor: Protecting VGA cards against bending and EMI for better performance, stability and strength.      

Overwhelming 18 phases VRM and brand-new infinity design, symbolizes the unlimited performance and power. Features Mystic Light Infinity, Dynamic Dashboard, Triple Turbo M.2 with Shield Frozr, XTREME Audio DAC and Dual Front USB 3.1 Gen2 Type-C connectors Supports 9th / 8th Gen Intel® Core™ / Pentium® Gold / Celeron® processors for LGA 1151 socket Supports DDR4 Memory, up to 4600(OC) MHz Mystic Light Infinity: 16.8 million colors / 29 effects controlled in one click. Mystic Light Extension supports both RGB and RAINBOW LED strip Dynamic Dashboard: Built-in dynamic panel that indicates the status of GODLIKE and shows off your own personality. Lightning Fast Game Experience: 1x Turbo U.2, 3x Turbo M.2 with Shield Frozr, Dual Front USB 3.1 Gen2 Type-C Xtreme Audio DAC: Isolated audio with ESS DAC, 2x audio processors & Nahimic to deliver the breathtaking sound quality with 384kHz/32-bit Killer xTend: Combine a built-in-switch with wireless extender. Killer fueled LAN & WIFI extender with ultimate traffic prioritization. Pre-installed I/O Shielding: Better EMI protection and more convenience for installation

B560M-A PRO Supports 10th Gen Intel® Core™, 11th Gen Intel® Core™, Pentium® Gold and Celeron® processors for LGA 1200 socket Supports DDR4 Memory, up to 5200(OC) MHz Core Boost:  With premium layout and digital power design to support more cores and provide better performance. DDR4 Boost:  Advanced technology to deliver pure data signals for the best performance and stability. Lightning Fast Experience:  PCIe 4.0, Lightning Gen4 x4 M.2 with M.2 Shield Frozr 2.5G LAN: Upgraded network solution for professional and multimedia use. Delivers a secure, stable and fast network connection Audio Boost:  Reward your ears with studio grade sound quality Steel Armor:  Protecting VGA cards against bending and EMI for better performance, stability and strength.

H510M PRO Supports 10 th  Gen Intel ®  Core™, 11 th  Gen Intel ®  Core™, Pentium ®  Gold and Celeron ®  processors for LGA 1200 socket Supports DDR4 Memory, up to 3200(Max) MHz Core Boost: With premium layout and digital power design to support more cores and provide better performance. DDR4 Boost: Advanced technology to deliver pure data signals for the best performance and stability. Lightning Fast Experience: PCIe 4.0 Turbo M.2: Running at PCI-E Gen3 x4 maximizes performance for NVMe based SSDs Audio Boost: Reward your ears with studio grade sound quality Steel Armor: Protecting VGA cards against bending and EMI for better performance, stability and strength.  

Supports 10th Gen Intel® Core™ / Pentium® Celeron® processors for LGA 1200 socket Supports DDR4 Memory, up to 2933(Max) MHz Core Boost: With premium layout and digital power design to support more cores and provide better performance. DDR4 Boost: Advanced technology to deliver pure data signals for the best performance and stability. Turbo M.2: Running at PCI-E Gen3 x4 maximizes performance for NVMe based SSDs Audio Boost: Reward your ears with studio grade sound quality Steel Armor: Protecting VGA cards against bending and EMI for better performance, stability and strength.

UGreen 5 in 1 Type-C Multiple Ports Hub price in Pakistan UGREEN USB C HUb 5 in1 with 4K HDMI, High Speed Internet, USB A Ports, 100W PD Charging Passthrough  devices into five ports for data transfer, display expansion, internet connection, and charging. Use the Ethernet port to maintain fast and a more stable wired network connection speeds up to 1 Gbps. 5-in-1 USB C Hub:This 5-in-1 USB-C Hub turns a single USB-C port of your USB-C devices into five ports for data transfer, display expansion, internet connection, and charging. Use the Ethernet port to maintain fast and a more stable wired network connection speeds up to 1 Gbps. Fast and Convenient Charging:When using all functions of the USB C dongle, the 100W USB C PD charging port can fully charge your device which compatible with MacBook Pro 2016/2017/2018/2019, MacBook Air 2018/2019/2020, Surface GO, Google PixelBook and more.(Note: The USB-C port only supports charging and does not support data transmission) 4K Ultra HD Video:The HDMI connection output resolution of this USB C ethernet hub is up to  [email protected]  You can enjoy lively Ultra HD video streaming with this USB C hub multiport adapter. Fast Data Transfer:You can connect a (wireless or wire) mouse, keyboard, hard drive, USB flash disk and more devices, and all ports can be used at the same time. The 2*USB 3. 0 ports transfer movies, music and files at up to 5Gbps, which is 10 times faster than USB 2. 0. Mac-style Design: Anodized aluminum Alloy casing with Ionized Finish. EMI Protection prevents interference with wireless devices. The UGREEN USB-C hub can save desk space and expand your devices connectivity.   UGREEN 5-in-1 USB C Hub with Ethernet and HDMI -Wired Gigabit Ethernet could definitely ensure a stable connection and max speed up to 1000Mbps. -Video and audio output through HDMI port with resolution up to 3840 x 2160 at 30Hz. -Two USB 3.0 Type-A ports with data transfer speed up to 5 Gbp/s. -Used with no external drivers or power required. -Unibody aluminum alloy housing. -Hidden LED Indicator. Compatible Devices Include: MacBook Pro (2015 / 2016 / 2017 / 2018/2019/2020/m1) MacBook Air (2015 / 2016 / 2017 / 2018/2019/2020/m1) iPad Pro (2020 / 2019 / 2018) Pixelbook (2019 / 2018 / 2017) XPS (13 inch / 15 inch) ThinkPad X1 Spectre Folio SF314 Supported Systems: Windows 10, 8, 7, Vista, XP, Mac OS X 10.6 or later, Linux 2.6.14 or Later Please Note: The USB-C port only supports charging, but does not support data transmission. 2.4 GHz wireless devices, MIDI devices and some USB 3.0 devices may not be supported. The extended cable is 0.5 ft long. Widely compatible MacBook / MacBook Pro (2020 /m1/ 2019 / 2018 / 2017) MacBook Air (2020 /m1/ 2019 / 2018) iPad Pro (2020 / 2019 / 2018) XPS (13 inch / 15 inch) Pixelbook (2019 / 2018 / 2017) 5-in-1 USB C Hub Five expansion interfaces to meet your work needs. Easy to Carry Around Keep your hub’s ports protected from dust and scratches with the included protective travel pouch.

Highlights: Item type: Cable Color: White Weight: approx. 27g Supports 10/100/1000 Mbps auto sensing, full duplex and half duplex Ethernet, cross detection, auto correction (Auto MDIX). Support IPv4 / IPv6 protocol and 10 BASE-T, 100 BASE-TX and 1000 BASE-T network. Interface Type: USB 3.0, RJ45 System Support: Windows XP/Vista/7/8,MAC OS 9.x/10.x,linux Transmission speed:10 /100 / 1000Mbps Description: Type-C port supports reverse plug. 3A Current output, USB PD function brings 100W power. USB3.1 standard 10Gbps data speed. Great EMI resistance. Downwardly supports USB2.0/3.0/PD. Both-way 20Gbps high speed data transfer. Suitable for communication, digital devices, multimedia, home appliance, etc. What’s in the box: 1 x RJ45 Network Cable Port to Type-C Adapter