Discussion

Description: Details iShopping.pk brings you the best price for Bosch Digital Discussion For Control Unit (CCSD-CU) with express shipping all over Pakistan.   The Bosch CCSD-CU is the basic control unit for the Bosch CCS-1000D digital conference system. This control unit powers the discussion microphones (up to 80 in total), controls cameras (CCTV software included) and interfaces with external equipment such as a public address system. The front panel provides the neccessary controls but the system can also be controlled via a laptop or tablet. This includes the ability to activate or deactivate participant microphones, or changing the status of paticipants from 'waiting' to 'speaking'. Up to 6 HD cameras can be connected and controlled via the integral software, in order to relay the image of the person speaking onto a large screen.   Features: • Plug-and-play functionality for quick and easy connection of up to 80 Discussion Devices • Intuitive web browser control for advanced configuration and control   Specifications: Mains voltage 100 to 240 VAC ± 10% Current consumption Maximum 0.6 A (100 VAC) to 0.2 A (240 VAC) DC supply to Discussion Devices 24 V ± 1 V (current limited) Number of Discussion Devices per Control Unit Max. 40 devices per trunk connector Discussion Device loudspeakers volume control 15 steps of 1.5 dB (starting from -10.5 dB) Limit threshold level to unit 12 dB above nominal level Gain reduction due to number of open microphones (NOM) 1/SQRT (NOM) Sample rate 44.1 kHz Nominal input (85 dB SPL) Max. input (110 dB SPL) XLR nominal microphone input -56 dBV XLR maximum microphone input -26 dBV RCA nominal input -24 dBV (+/- 6 dB) RCA maximum input +6 dBV S/N > 94 dBA Frequency response 30 Hz to 20 kHz RCA nominal output -24 dBV (+6/- 24 dB) RCA maximum output +6 dBV S/N > 102 dBA Frequency response 30 Hz to 20 kHz Recording/ Playback (bit rate) 64, 96, 128, 256 Kbit/sec Recording/ Playback (sample frequency) 44.1 kHz Nominal output 72 dB SPL Frequency response 200 Hz to 12.5 kHz Gain range mute -10.5 to +12 SanDisk USB memory stick Formatted with FAT32 file system.Maximum size: 128 GB. Bite rate Internal memory hours, USB memory stick hours 16 GB 32 GB, 64 GB, 128 GB 64 8 hrs, 500, 1000, 2000, 4000 96 5 hrs, 350, 700, 1400, 2800 128 4 hrs, 250, 500, 1000, 2000 256 * 2 hrs, 125, 250, 500, 1000 Dimensions including feet (H x W x D) 45 x 440 x 200 mm(1.8 x 17.3 x 7.9 in)19” wide, 1 RU high Height of feet 5.5 mm (0.2 in) Mounting Tabletop19-inch rack Weight (CCSD-CU) Approx. 3.2 kg (7.1 lb) Weight (CCSD-CURD) Approx. 3.4 kg (7.5 lb) Material (top) Painted metal Material (base) Painted metal Color (top) Traffic black (RAL 9017) matt-gloss Color (base) Traffic black (RAL 9017) matt-gloss Rim Pearl light grey (RAL 9022) matt-gloss Operating temperature 5 ºC to +45 ºC (+41 ºF to +113 ºF) Storage temperature -40 ºC to +70 ºC (-40 ºF to +158 ºF) Relative humidity 5% to 98% non-condensing

Description: Details iShopping.pk brings you the best price for Bosch Discussion Device With Long-Stem Microphone (CCSD-DL) with express shipping all over Pakistan.   Discussion Devices are connected in a daisy‑chain configuration to the Control Unit of a CCS 1000 Digital Discussion System. Their plug‑and‑play functionality allows them to be conveniently connected to and removed from the system as required. A power down or restart of the system is not necessary, which ensures for fast installation and reconfiguration times. Participants can take part in a discussion by speaking into the microphone and listening to proceedings through the built‑in loudspeaker or (optional) headphones.   Features: • Unique patent pending possible-to-speak indicator • Plug and play functionality for ensuring fast installation and reconfiguration times • Compact, attractive ergonomic design • Easily configured as a participant device or chairperson’s device • Immunity to mobile phone interference   Specifications: Frequency response 200 Hz to 12.5 kHz Headphones load impedance > 32 ohms Loudspeaker nominal output 72 dB SPL Dimensions device without microphone (H x W x D) 64 x 203 x 146 mm(2.5 x 8.0 x 5.7 in) Height with microphone in horizontal position 130 mm (5.1 in) Length of microphone from mounting surface CCSD‑DS: 310 mm (12.2 in)CCSD‑DL: 480 mm (18.9 in) Weight Approx. 1 kg (2.2 lb) Mounting Tabletop (portable or fixed) Material (top) Plastic ABS+PC Material (base) Metal ZnAl4 Color (top) Traffic black (RAL 9017) matt-gloss Color (base) Pearl light grey (RAL 9022) matt-gloss Operating temperature 0 ºC to +35 ºC (+32 ºF to +95 ºF) Storage temperature -40 ºC to +70 ºC(-40 ºF to +158 ºF) Relative humidity 15% to 90% Air pressure 600 to 1100 hPa

Description: Details iShopping.pk brings you the best price for Bosch CCSD-DL Discussion Device With Long Microphone with express shipping all over Pakistan.   Features: • Unique patent pending possible-to-speak indicator • Plug and play functionality for ensuring fast installation and reconfiguration times • Compact, attractive ergonomic design • Easily configured as a participant device or chairperson device • Immunity to mobile phone interference   Specifications: Power consumption 1.3 W Frequency response 30 Hz to 20 kHz (System electrical) THD S/N >93 dBA Sampling rate 44.1 kHz Headphones load impedance > 32 ohms Loudspeaker max. peak output power 4 W     Loudspeaker nominal output 72 dB SPL Participants loudspeaker frequency response 200 Hz to 16 kHz (acoustical) Microphone polar pattern Cardioid Participants microphone frequency response 125 Hz to 15 kHz Microphone nominal input 85 dB SPL Dimensions device without microphone(H x W x D) 64 x 203 x 146 mm(2.5 x 8.0 x 5.7 in) Height with microphone in horizontal position 130 mm (5.1 in) Length of microphone from mounting surface CCSD‑DS: 310 mm (12.2 in) CCSD‑DL: 480 mm (18.9 in) Weight Approx. 1 kg (2.2 lb) Mounting Tabletop (portable or fixed) Material (top) Plastic ABS+PC Material (base) Metal ZnAl4 Color (top) Traffic black (RAL 9017) matt-gloss Color (base) Pearl light grey (RAL 9022) matt-gloss Operating temperature 0 ºC to +35 ºC (+32 ºF to +95 ºF) Storage and transport temperature -40 ºC to +70 ºC(-40 ºF to +158 ºF) Relative humidity 5% to 98% non-condensing Air pressure 600 to 1100 hPa

Description: Details iShopping.pk brings you the best price for Bosch CCSD-DS Discussion Device With Short Microphone with express shipping all over Pakistan.   Features: • Possible-to-speak indicator •  Plug-and-Play functionality for ensuring fast installation and reconfiguration times •  Compact, attractive ergonomic design •  Easily configured as a participant device or chairperson device •  Immunity to mobile phone interference   Specifications: General Product Type Speaker microphone Width 8 in Depth 5.7 in Height 14.7 in Color RAL 9017, RAL 9022, traffic black, pearl light gray Recommended Use Conference Headphones Connectivity Technology Wired Microphone Microphone Operation Mode Mono Connectivity Technology Wired Frequency Response 200 - 12500 Hz Remote Control Controls Volume, on/off Connections Connector Type Headphones (mini-phone 3.5 mm) Microphone Miscellaneous Cables Included Microphone cable - 6.6 ft

Description: Details iShopping.pk brings you the best price for Bosch Discussion Device With Short-Stem Microphone (CCSD-DS) with express shipping all over Pakistan.   Features: • Possible-to-speak indicator • Plug-and-Play functionality for ensuring fast installation and reconfiguration times • Compact, attractive ergonomic design • Easily configured as a participant device or chairperson device • Immunity to mobile phone interference   Specifications: General Product Type Speaker microphone Width 8 in Depth 5.7 in Height 14.7 in Color RAL 9017, RAL 9022, traffic black, pearl light gray Recommended Use Conference Headphones Connectivity Technology Wired Microphone Microphone Operation Mode Mono Connectivity Technology Wired Frequency Response 200 - 12500 Hz Remote Control Controls Volume, on/off Connections Connector Type Headphones (mini-phone 3.5 mm) Microphone Miscellaneous Cables Included Microphone cable - 6.6 ft

Description: Details iShopping.pk brings you the best price for Bosch Control Unit With DAFS & Recorder (CCSD-CURD) with express shipping all over Pakistan.   Features: • Plug-and-play functionality for quick and easy connection of up to 80 Discussion Devices • Intuitive web browser interface control for advanced configuration and control • Built‑in MP3 recorder with internal memory and USB recording • Built‑in Digital Acoustic Feedback Suppression (DAFS) for ensuring superior speech intelligibility • On-board support for automatic HD camera control   Specifications: Supply voltage Adaptor 100 to 240 VAC, 50/60 Hz Current Consumption voltage Adaptor 1.9 A (100 VAC) to 1 A 240 (VAC) DC voltage Control Unit 24 V, 6.0 A Maximum number of Discussion Devices for Control Unit (without Extension Unit) 40 Discussion Devices per trunk 80 Discussion Device in total 24 V, Max 5.2 A (short-circuited protected) Discussion Device loudspeakers volume control 15 steps of 1.5 dB (starting from -10.5 dB) Limit threshold level to unit 12 dB above nominal level Gain reduction due to number of open microphones (NOM) 1/SQRT (NOM) Sample rate 44.1 kHz Frequency response 30 Hz to 20 kHz Ethernet speed 1 Gb/s Nominal input (85 dB SPL) Max. input (110 dB SPL) XLR nominal microphone input -56 dBV XLR maximum microphone input -26 dBV RCA nominal input -24 dBV (+/- 6 dB) RCA maximum input +6 dBV S/N > 93 dBA Frequency response 30 Hz to 20 kHz THD RCA nominal output -24 dBV (+6/- 24 dB) RCA maximum output +6 dBV S/N > 93 dBA Frequency response 30 Hz to 20 kHz THD Recording/ Playback (bit rate) 64, 96, 128, 256 Kbit/sec Recording/ Playback (sample frequency) 44.1 kHz Nominal output 72 dB SPL Frequency response 200 Hz to 16 kHz (acoustical) Gain range Mute -10.5 to +12 dB SanDisk USB memory stick Formatted with FAT32 file system. Maximum size: 128 GB. Bite rate Internal memory size/hours, USB memory stick size/hours 225 MB 16 GB, 32 GB, 64 GB, 128 GB 64 8 hrs, 500 hrs, 1000 hrs, 2000 hrs, 4000 hrs 96 5 hrs, 350 hrs, 700 hrs, 1400 hrs, 2800 hrs 128 4 hrs, 250 hrs, 500 hrs, 1000 hrs, 2000 hrs 256 * 2 hrs, 125 hrs, 250 hrs, 500 hrs, 1000 hrs Dimensions including feet (H x W x D) 45 x 440 x 200 mm(1.8 x 17.3 x 7.9 in) 19” wide, 1 RU high Height of feet 5.5 mm (0.2 in) Mounting Tabletop or 19 “ rack Material (top and base) Painted metal Color (top and base) Traffic black (RAL 9017) matt-gloss Rim front panel Pearl light grey (RAL 9022) matt-gloss Weight (CCSD‑CURD) Approx. 3.4 kg (7.5 lb) Operating temperature 5 ºC to +45 ºC (+41 ºF to +113 ºF) Storage and transport temperature -40 ºC to +70 ºC (-40 ºF to +158 ºF) Relative humidity 5% to 98% non-condensing

Description: Details iShopping.pk brings you the best price for Bosch CCS-CU Control Unit For CCS 900 Ultro Conference System with express shipping all over Pakistan.   The Bosch CCS-CU Control Unit is the central power and control station for all CCS 900 Ultro Conference System contributor units, such as the chairman and delegate units. The control unit will supply power for up to 50 delegate / chairman units, and provide control for up to 150. The unit features a built in speaker and automated, programmable control over contributor units without the need for an operator. Its Digital Acoustic Feedback Suppression (DAFS) eliminates feedback howling and maintains clear, intelligible speech. Plenty of connections allow for interfacing within paging systems, amplifier systems, recording devices and more. The unit is feature rich, however its control section is straightforward and intuitive to operate in any conference setting.   Features: Discussion Control Without Operator The CU can be setup to operate standalone without the need for an operator. The following 5 modes can be chosen using a rotary control on the unit's top panel: • Open mode - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active • Open mode with auto-switch-off - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active. If the delegate does not speak for 30 seconds, microphones are automatically switched off • Override mode - delegates can override each other simply by activating their microphones. Only one microphone can be active at any one time. (Note: In override mode, delegates cannot override chairmen) • Chairman only mode - only chairmen can speak. Delegate microphones cannot be activated, even when a chairman is not speaking • Test mode - checks if system connections are correct. All microphone light rings and contribution unit LEDs light up to indicate that units are properly connected Supplies Power for up to 50 Contribution Units The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to connect 25 contribution units to each trunk output, with a maximum system cable length of 109.3 yards (100m). Provides Control for up to 150 Contribution Units Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150 contribution units. In this configuration a single CU acts as a master controller for the entire system. Built-in Monitor Loudspeaker The built-in monitor loudspeaker and headphone socket allow the conference to be monitored. Interfaces the System With External Equipment The following equipment can be interfaced to the CCS Ultro Discussion System through the CU: • External wired or wireless microphone - for guest speakers or audience participation. (Note: The external microphone is muted when the priority button on a chairman unit is pressed, and when the system is operating in 'chairman only' mode) • External PA system - for transmitting the proceedings to an audience in the same room or an adjacent room• Tape recorder - for external recording and playing back meetings and discussions • Audio equipment - for providing background music • Telephone coupler - to allow a remote delegate to participate via telephone• External audio processing - an insertion connector is provided Controls and Indicators (Top) • Mains on/off switch • Graphical display for status information (CCS‐CURD) • 5 soft buttons for configuration and control of thebuilt-in MP3 recorder (CCS‐CURD) • Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This control also determines the maximum level for the headphone outputs of the contribution units and the CU. • Microphone mode rotary switch, for setting the number of simultaneously active microphones, and selecting one of the four operation modes (plus test mode) • Power on LED Controls and Indicators (Back) • On/off switch for digital acoustic feedback suppression facility (CCS‐CUD, CCS‐CURD)• Microphone input gain adjustment • External recorder input gain adjustment• Insertion connector bypass switch   Specifications: Connections Top • 1x 0.14" (3.5mm) stereo headphone socket Back • 1x AC input • 2x 7-pole circular female connectors, trunk in/out loop through interconnection  • 1x 3-pole female XLR connector, microphone input (can be used as line input by included 50dB attenuator) • 1 x Cinch connector pair, line input/output  • 1 x Cinch connector pair, telephone input/output • 1 x Cinch connector pair, insertion input/output  • 2 x Cinch connector pairs (R/L channel), external recorder input/output • USB interface (CCS-CURD) Power Supply Mains voltage: 100 to 240 VAC ± 10% Current consumption: maximum 0.9A (100 VAC) to 0.3 A (240 VAC) DC supply to contribution units: 24V ± 1V (current limited) Volume mute (50dB att.) + 10 steps of 1.9dB Limiter 10dB above nominal level loudspeaker / headphone Gain Gain reduction due to number of open microphones (NOM): ÷ NOM ± 1 dB Total Harmonic Distortion Nominal input (85 dB SPL): Max. input (110 dB SPL): Sample Rate Recording: 32kHz Playback: 32, 44.1, 48kHz Bit Rate Recording: 64, 96, 128, 192, 256 KBit/sec Playback: any bitrate Mount Tabletop (portable or fixed) 19-inch rack flush mounting Material Top: polymer Bottom: painted metal Color Charcoal and Black Dimensions (HxWxD) 3.4 x 14.2 x 5.6" (84 x 361 x 143mm) Height of feet: 0.22" (5.5mm) Weight 3.3 lb (1.5kg)

Description: Details iShopping.pk brings you the best price for Bosch CCS-CUD Control Unit For CCS 900 Ultro Conference System with express shipping all over Pakistan.   The Bosch CCS-CUD Control Unit is the central power and control station for all CCS 900 Ultro Conference System contributor units, such as the chairman and delegate units. The control unit will supply power for up to 50 delegate / chairman units, and provide control for up to 150. The unit features a built in speaker and automated, programmable control over contributor units without the need for an operator. Its Digital Acoustic Feedback Suppression (DAFS) eliminates feedback howling and maintains clear, intelligible speech. Plenty of connections allow for interfacing within paging systems, amplifier systems, recording devices and more. The unit is feature rich, however its control section is straightforward and intuitive to operate in any conference setting.   Features: Digital Acoustic Feedback Suppression The digital acoustic feedback suppression facility automatically eliminates acoustic feedback (also known as 'howling' or 'Larsen effect'). This gives better speech intelligibility by allowing the speaker volume to be turned up as loud as required without any risk of feedback. Discussion Control Without Operator The CU can be setup to operate standalone without the need for an operator. The following 5 modes can be chosen using a rotary control on the unit's top panel: • Open mode - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active • Open mode with auto-switch-off - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active. If the delegate does not speak for 30 seconds, microphones are automatically switched off • Override mode - delegates can override each other simply by activating their microphones. Only one microphone can be active at any one time. (Note: In override mode, delegates cannot override chairmen) • Chairman only mode - only chairmen can speak. Delegate microphones cannot be activated, even when a chairman is not speaking • Test mode - checks if system connections are correct. All microphone light rings and contribution unit LEDs light up to indicate that units are properly connected Supplies Power for up to 50 Contribution Units The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to connect 25 contribution units to each trunk output, with a maximum system cable length of 109.3 yards (100m). Provides Control for up to 150 Contribution Units Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150 contribution units. In this configuration a single CU acts as a master controller for the entire system. Built-in Monitor Loudspeaker The built-in monitor loudspeaker and headphone socket allow the conference to be monitored. Interfaces the System With External Equipment The following equipment can be interfaced to the CCS Ultro Discussion System through the CU: • External wired or wireless microphone - for guest speakers or audience participation. (Note: The external microphone is muted when the priority button on a chairman unit is pressed, and when the system is operating in 'chairman only' mode) • External PA system - for transmitting the proceedings to an audience in the same room or an adjacent room• Tape recorder - for external recording and playing back meetings and discussions • Audio equipment - for providing background music • Telephone coupler - to allow a remote delegate to participate via telephone• External audio processing - an insertion connector is provided Controls and Indicators (Top) • Mains on/off switch • Graphical display for status information (CCS‐CURD) • 5 soft buttons for configuration and control of thebuilt-in MP3 recorder (CCS‐CURD) • Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This control also determines the maximum level for the headphone outputs of the contribution units and the CU. • Microphone mode rotary switch, for setting the number of simultaneously active microphones, and selecting one of the four operation modes (plus test mode) • Power on LED Controls and Indicators (Back) • On/off switch for digital acoustic feedback suppression facility (CCS‐CUD, CCS‐CURD)• Microphone input gain adjustment • External recorder input gain adjustment• Insertion connector bypass switch   Specifications: Connections Top • 1x 0.14" (3.5mm) stereo headphone socket Back • 1x AC input • 2x 7-pole circular female connectors, trunk in/out loop through interconnection  • 1x 3-pole female XLR connector, microphone input (can be used as line input by included 50dB attenuator) • 1 x Cinch connector pair, line input/output  • 1 x Cinch connector pair, telephone input/output • 1 x Cinch connector pair, insertion input/output  • 2 x Cinch connector pairs (R/L channel), external recorder input/output • USB interface (CCS-CURD) Power Supply Mains voltage: 100 to 240 VAC ± 10% Current consumption: maximum 0.9A (100 VAC) to 0.3 A (240 VAC) DC supply to contribution units: 24V ± 1V (current limited) Volume mute (50dB att.) + 10 steps of 1.9dB Limiter 10dB above nominal level loudspeaker / headphone Gain Gain reduction due to number of open microphones (NOM): ÷ NOM ± 1 dB Total Harmonic Distortion Nominal input (85 dB SPL): Max. input (110 dB SPL): Sample Rate Recording: 32kHz Playback: 32, 44.1, 48kHz Bit Rate Recording: 64, 96, 128, 192, 256 KBit/sec Playback: any bitrate Mount Tabletop (portable or fixed) 19-inch rack flush mounting Material Top: polymer Bottom: painted metal Color Charcoal and Black Dimensions (HxWxD) 3.4 x 14.2 x 5.6" (84 x 361 x 143mm) Height of feet: 0.22" (5.5mm) Weight 3.3 lb (1.5kg)

Description: Details iShopping.pk brings you the best price for Bosch CCS-CU Control Unit For CCS 900 Ultro Conference System U.S. Version with express shipping all over Pakistan.   The Bosch CCS-CU Control Unit is the central power and control station for all CCS 900 Ultro Conference System contributor units, such as the chairman and delegate units. The control unit will supply power for up to 50 delegate / chairman units, and provide control for up to 150. The unit features a built in speaker and automated, programmable control over contributor units without the need for an operator. Its Digital Acoustic Feedback Suppression (DAFS) eliminates feedback howling and maintains clear, intelligible speech. Plenty of connections allow for interfacing within paging systems, amplifier systems, recording devices and more. The unit is feature rich, however its control section is straightforward and intuitive to operate in any conference setting.   Features: Discussion Control Without Operator The CU can be setup to operate standalone without the need for an operator. The following 5 modes can be chosen using a rotary control on the unit's top panel: • Open mode - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active • Open mode with auto-switch-off - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active. If the delegate does not speak for 30 seconds, microphones are automatically switched off • Override mode - delegates can override each other simply by activating their microphones. Only one microphone can be active at any one time. (Note: In override mode, delegates cannot override chairmen) • Chairman only mode - only chairmen can speak. Delegate microphones cannot be activated, even when a chairman is not speaking • Test mode - checks if system connections are correct. All microphone light rings and contribution unit LEDs light up to indicate that units are properly connected Supplies Power for up to 50 Contribution Units The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to connect 25 contribution units to each trunk output, with a maximum system cable length of 109.3 yards (100m). Provides Control for up to 150 Contribution Units Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150 contribution units. In this configuration a single CU acts as a master controller for the entire system. Built-in Monitor Loudspeaker The built-in monitor loudspeaker and headphone socket allow the conference to be monitored. Interfaces the System With External Equipment The following equipment can be interfaced to the CCS Ultro Discussion System through the CU: • External wired or wireless microphone - for guest speakers or audience participation. (Note: The external microphone is muted when the priority button on a chairman unit is pressed, and when the system is operating in 'chairman only' mode) • External PA system - for transmitting the proceedings to an audience in the same room or an adjacent room • Tape recorder - for external recording and playing back meetings and discussions • Audio equipment - for providing background music • Telephone coupler - to allow a remote delegate to participate via telephone• External audio processing - an insertion connector is provided Controls and Indicators (Top) • Mains on/off switch • Graphical display for status information (CCS‐CURD) • 5 soft buttons for configuration and control of thebuilt-in MP3 recorder (CCS‐CURD) • Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This control also determines the maximum level for the headphone outputs of the contribution units and the CU. • Microphone mode rotary switch, for setting the number of simultaneously active microphones, and selecting one of the four operation modes (plus test mode) • Power on LED Controls and Indicators (Back) • On/off switch for digital acoustic feedback suppression facility (CCS‐CUD, CCS‐CURD)• Microphone input gain adjustment • External recorder input gain adjustment • Insertion connector bypass switch   Specifications: Connections Top • 1x 0.14" (3.5mm) stereo headphone socket Back • 1x AC input • 2x 7-pole circular female connectors, trunk in/out loop through interconnection  • 1x 3-pole female XLR connector, microphone input (can be used as line input by included 50dB attenuator) • 1 x Cinch connector pair, line input/output  • 1 x Cinch connector pair, telephone input/output • 1 x Cinch connector pair, insertion input/output  • 2 x Cinch connector pairs (R/L channel), external recorder input/output • USB interface (CCS-CURD) Power Supply Mains voltage: 100 to 240 VAC ± 10% Current consumption: maximum 0.9A (100 VAC) to 0.3 A (240 VAC) DC supply to contribution units: 24V ± 1V (current limited) Volume mute (50dB att.) + 10 steps of 1.9dB Limiter 10dB above nominal level loudspeaker / headphone Gain Gain reduction due to number of open microphones (NOM): ÷ NOM ± 1 dB Total Harmonic Distortion Nominal input (85 dB SPL): Max. input (110 dB SPL): Sample Rate Recording: 32kHz Playback: 32, 44.1, 48kHz Bit Rate Recording: 64, 96, 128, 192, 256 KBit/sec Playback: any bitrate Mount Tabletop (portable or fixed) 19-inch rack flush mounting Material Top: polymer Bottom: painted metal Color Charcoal and Black Dimensions (HxWxD) 3.4 x 14.2 x 5.6" (84 x 361 x 143mm) Height of feet: 0.22" (5.5mm) Weight 3.3 lb (1.5kg)

Description: Details iShopping.pk brings you the best price for Bosch CCS-CUD Control Unit For CCS 900 Ultro Conference System U.S. Version with express shipping all over Pakistan.   The Bosch CCS-CUD Control Unit is the central power and control station for all CCS 900 Ultro Conference System contributor units, such as the chairman and delegate units. The control unit will supply power for up to 50 delegate / chairman units, and provide control for up to 150. The unit features a built in speaker and automated, programmable control over contributor units without the need for an operator. Its Digital Acoustic Feedback Suppression (DAFS) eliminates feedback howling and maintains clear, intelligible speech. Plenty of connections allow for interfacing within paging systems, amplifier systems, recording devices and more. The unit is feature rich, however its control section is straightforward and intuitive to operate in any conference setting.   Features: Digital Acoustic Feedback Suppression The digital acoustic feedback suppression facility automatically eliminates acoustic feedback (also known as 'howling' or 'Larsen effect'). This gives better speech intelligibility by allowing the speaker volume to be turned up as loud as required without any risk of feedback. Discussion Control Without Operator The CU can be setup to operate standalone without the need for an operator. The following 5 modes can be chosen using a rotary control on the unit's top panel: • Open mode - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active • Open mode with auto-switch-off - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active. If the delegate does not speak for 30 seconds, microphones are automatically switched off • Override mode - delegates can override each other simply by activating their microphones. Only one microphone can be active at any one time. (Note: In override mode, delegates cannot override chairmen) • Chairman only mode - only chairmen can speak. Delegate microphones cannot be activated, even when a chairman is not speaking • Test mode - checks if system connections are correct. All microphone light rings and contribution unit LEDs light up to indicate that units are properly connected Supplies Power for up to 50 Contribution Units The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to connect 25 contribution units to each trunk output, with a maximum system cable length of 109.3 yards (100m). Provides Control for up to 150 Contribution Units Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150 contribution units. In this configuration a single CU acts as a master controller for the entire system. Built-in Monitor Loudspeaker The built-in monitor loudspeaker and headphone socket allow the conference to be monitored. Interfaces the System With External Equipment The following equipment can be interfaced to the CCS Ultro Discussion System through the CU: • External wired or wireless microphone - for guest speakers or audience participation. (Note: The external microphone is muted when the priority button on a chairman unit is pressed, and when the system is operating in 'chairman only' mode) • External PA system - for transmitting the proceedings to an audience in the same room or an adjacent room • Tape recorder - for external recording and playing back meetings and discussions • Audio equipment - for providing background music • Telephone coupler - to allow a remote delegate to participate via telephone• External audio processing - an insertion connector is provided Controls and Indicators (Top) • Mains on/off switch • Graphical display for status information (CCS‐CURD) • 5 soft buttons for configuration and control of thebuilt-in MP3 recorder (CCS‐CURD) • Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This control also determines the maximum level for the headphone outputs of the contribution units and the CU. • Microphone mode rotary switch, for setting the number of simultaneously active microphones, and selecting one of the four operation modes (plus test mode) • Power on LED Controls and Indicators (Back) • On/off switch for digital acoustic feedback suppression facility (CCS‐CUD, CCS‐CURD)• Microphone input gain adjustment • External recorder input gain adjustment • Insertion connector bypass switch   Specifications: Connections Top • 1x 0.14" (3.5mm) stereo headphone socket Back • 1x AC input • 2x 7-pole circular female connectors, trunk in/out loop through interconnection  • 1x 3-pole female XLR connector, microphone input (can be used as line input by included 50dB attenuator) • 1 x Cinch connector pair, line input/output  • 1 x Cinch connector pair, telephone input/output • 1 x Cinch connector pair, insertion input/output  • 2 x Cinch connector pairs (R/L channel), external recorder input/output • USB interface (CCS-CURD) Power Supply Mains voltage: 100 to 240 VAC ± 10% Current consumption: maximum 0.9A (100 VAC) to 0.3 A (240 VAC) DC supply to contribution units: 24V ± 1V (current limited) Volume mute (50dB att.) + 10 steps of 1.9dB Limiter 10dB above nominal level loudspeaker / headphone Gain Gain reduction due to number of open microphones (NOM): ÷ NOM ± 1 dB Total Harmonic Distortion Nominal input (85 dB SPL): Max. input (110 dB SPL): Sample Rate Recording: 32kHz Playback: 32, 44.1, 48kHz Bit Rate Recording: 64, 96, 128, 192, 256 KBit/sec Playback: any bitrate Mount Tabletop (portable or fixed) 19-inch rack flush mounting Material Top: polymer Bottom: painted metal Color Charcoal and Black Dimensions (HxWxD) 3.4 x 14.2 x 5.6" (84 x 361 x 143mm) Height of feet: 0.22" (5.5mm) Weight 3.3 lb (1.5kg)

overhead projector 2000 lumens 2 lamp new projector The essence of the OHP and the Data Projector In order to put the following tips into context, consider a few points about the OHP in the classroom: The OHP is usually under the control of the teacher: this means that it is by default an instrument of teacher-centred instruction. This is not necessarily a bad thing, and teachers can develop its use as a tool of session management. Switching it on, for example, is likely to send the message, "Now get ready for some input from me", and can be used to curtail discussions which are veering off the point. Similarly, switching it off when a discussion starts is a way of acknowledging that the class group is making the running. One teacher I observed recently worked mainly on a flip-chart: she just used the data projector to project single key words about the topic the class was working on. It was very effective in helping the students to keep track. It presents a series of images in sequence: the timing and ordering is again controlled by the teacher. Indeed, having a series of OHTs can readily substitute for the teacher having to have her own notes, and free her up to pay more attention to the class, and to expound the material more spontaneously. But the fact that each image is shown for a limited period of time means that its content needs to be digestible within that period. So apart from sheer legibility issues, there should not be too much on any one OHT. It is, of course, a visual medium: this requires attention to the needs of students who may not find it accessible. These include not only students with visual impairments, but also dyslexic students. There is some evidence to suggest that the high contrast of the screen, which is a help to many students, can hinder the reading of those who have some forms of dyslexia. Students with hearing impairment may find it difficult to follow the lips of a lecturer and look at the screen at the same time. Conventional text is linear: we all know it takes time to read. Graphics, including some non-conventional text such as mind-maps, and labelled diagrams, are perceived at once as a whole, and then "read" in unpredictable orders by different students. This comes more naturally to some students than others. You have two channels of communication going at the same time, assuming that you are talking at the same time. You need to consider how they interact.

Description: Details iShopping.pk brings you the best price for Shure Central Control Unit With Power Supply Kit with express shipping all over Pakistan.   The Central Control Unit for DDS 5900 and DCS 6000 Conference Systems from Shure powers up to 60 microphone units and supports up to 250 units. It supports 2 languages and 32 interpreters and can be used in various speech-application environments such as hotel/conference centers, multi-purpose/training rooms, education facilities, corporate/board rooms, courtrooms, and more. Featuring two analog audio inputs for external sources, the Central Control Unit has eight analog audio outputs for connections to videoconferencing systems, A/V recording equipment, supplemental sound reinforcement systems, or wireless language distributions system. In addition, with Feature License FL6000 (sold separately), the DIS-CCU can be used with DCS 6000-series microphone units serving up to 250 participants and 4 languages. Additional Feature Licenses enable support for up to 3,800 participants, 200 interpreters, and 31 languages. • Fully digital audio transmission of floor plus 31 interpretation channels and 8 conference microphone audio channels in a single digital-bus cable structure using shielded CAT5e cables • OLED display on the front enables the user to setup basic system configurations in terms of maximum number of speakers/requests, microphone operation mode, etc. • TCP/IP Ethernet connection for web browser control, integration with optional SW 6000 software suite, or third party external control system (AMX, Crestron, etc.) • 2 analog audio inputs and 8 analog audio outputs for distribution of audio from eight groups of units, the floor channel, or the interpreter channels. • Connection for Emergency Evacuation Message (EEM) is available using 'Audio In 2' and a contact closure switch • Powers up to 60 units without additional power supply (depending on unit type)   Features: • Central Control Unit and Microprocessor • Power Supply for Central Control Unit • For DDS 5900 & DCS 6000 Systems • 4 Modes: Auto, FIFI, VOX, and Manual • 3 Microphone Interrupt Modes • 2 Analog Audio Inputs • Up to 8 Microphones Open at One Time • Scrambles Audio to Avoid Evesdropping • Auto Off of Conference Units   Specifications: System Performance Max Number of Discussion Units For DDS 5900: 250 Powered by CU 5905: 60 Microphones Max Number Open: 8 Languages Interpreter Channels: 2 Max Number of Interpreter Units: 32 Network LAN DCS-LAN Outputs: 4 x RJ45 female sockets TCP/IP 1 x RJ45 female socket Audio Inputs Analog Input 1: 1 x 3-pin female XLR socket (electronically balanced) Analog Input 2 EEM: 1 x 3-pin female XLR socket (electronically balanced) with contact closure Input Level Max: +15 dBm (4.5 Vrms) Input Impedance 50 to 100 kOhms Audio Output 8 x 3-pin XLR (electronically balanced) Maximum load: >1 kOhms Maximum Load >1 kOhms Nominal Output Levels 0 dBm at nominal input Maximum Output Level 4.9 Vrms ~ +16 dBm Electrical Power Consumption 22 W/48 V (150 W max.) Supply Voltage For Microphone Units: 122 W/48 V Sampling Frequency 24-bit/32 kHz Total Harmonic Distortion (THD) Signal to Noise Ratio >85 dBA Mechanical Mounting Tabletop, standard 19" rack. Storage Temperature Range -4 to 140°F (-20 to 60°C) Operating Temperature Range 41 to 104°F (5 to 40°C) Humidity 10 to 80% Dimensions (H x W x D) 1.75 x 16.8 x 7.2" (44.4 x 426 x 186 mm) Weight 6.17 lb (2.8 kg)  

Description: Details iShopping.pk brings you the best price for AKG CS3 BU Conference Base Unit with express shipping all over Pakistan.   The  AKG CS3 BU Conference Base Unit  is the base unit for the CS3 conference system which is designed for fixed and mobile conference applications, and provides all the necessary inputs and outputs to manage a conference for up to 60 microphone stations. It is the interface to all audio devices in a meeting room and offers a RS-232 interface to connect an optional camera control system (sold separately). The CS3 BU Base Unit can even work in a stand-alone mode in 4 selectable operating modes, namely, Override, Normal, Free, and Request, thereby offering maximum flexibility in conference management. With the NOM limitation function, the maximum number of active stations can be programmed to 1, 2, 4, or 6 simultaneous open microphones. Adjustable bass, treble, and master volume are also featured. If necessary, two CS3 BU units can be combined to control a large conference system with up to 120 microphone stations.   All-In-One Conference Controller For discussion systems of up to 60 stations per base unit Four Selectable Operating Modes For flexible conference management Connects to All Relevant Devices Can be connected to a PA, recording device, external audio and camera control systems Extension Interface Combines 2 units to control up to 120 stations Compact 19" Housing For easy rack mounting   Additional Features: • Capable of supporting 60 microphone units • Specific 8-pin DIN plug • Bus connection mode • 2-Channel mono audio inputs • 2-Channel mono original audio outputs • Adjustable maximum number of active microphones with 1,2,4, and 6 options • Four conference modes: Override, Normal, Free, and Request • Adjustable bass, treble, and master volume • Video tracing function through the central control output • Remote telephone conference along with telephone coupler   Specifications: Power Supply SMPS 100 to 240V (50 Hz / 60 Hz) 3 A Consumption Static: 13 W Nominal Power: 320 W Output Power ≤ 90 W / 24 V each way Mode Balanced / Unbalanced Frequency Response 50 Hz to 20 kHz S/N Ratio >80 dB THD Distortion: Distortion at Overload: Crosstalk Attenuation >50 dB (1 kHz) Operating Temperature 32 to 104°F (0 to 40°C) at 95% relative humidity (non-condensing) Dimensions (L x W x H) 18.9 x 11.0 x 3.4" (482.0 x 281.0 x 88.4 mm) Weight 11.4 lb (5.2 kg)

Description: Details iShopping.pk brings you the best price for Bosch CCS 1000 D Transport Case For 6 Unit with express shipping all over Pakistan.   Features: • Can hold one Control Unit, six Discussion Devices and accessories • Attractive, yet sturdy construction • Interior specially molded to securely hold system units • Easy to transport and store due to wheels and handles • Two separate locks for optimum security   Specifications: Dimensions (H x W x D) 560 x 795 x 235 mm(22.0 x 31.3 x 9.3 in) Weight (empty) 6 kg (13.2 lb) Material (body) 3 mm (0.12 in) ABS Material (rim) Aluminum Color (body) Black (RAL9004) Color (rim) Silver

Description: Details iShopping.pk brings you the best price for Toa Electronics Infrared Chairperson Station (TS-801) with express shipping all over Pakistan.   The TOA 800 series conference system is a professional solution for wireless conference microphone operation in boardrooms, panel discussion groups, meeting halls, etc. The 800 series features secure infrared technology for wireless operation without bulky cables and wiring configurations. A functional system consists of a TS-800UL system controller, a TS-905 or TS-907 infrared transceiver and up to sixty-four TS-801 and TS-802 delegate / chairperson remote microphone stations. The TS-801 chairperson station is a remote microphone station used in the 800 series wireless conference system. The chairperson station features a priority switch that interrupts delegate stations whenever important messages need to get through. Optional long and short length gooseneck microphones are sold separately. Additional features include a built-in speaker, a headphone output with volume adjust and Talk button.   Features: Priority Control Switch The TS-801 features a priority switch that overrides the TS-802 delegate stations. This is a necessary feature for conference moderators and chairmen. Infrared Wireless Operation The 800 series conference systems feature infrared wireless operation for less bulk and easier configuration and setup. Headphone Output Built-in Headphone output with volume adjust is provided.   Specifications: Inputs Microphone Terminal: XLR-4-31 type  for optional TS-903 or TS-904 gooseneck microphones Outputs Headphone: 1/8" (3.5mm) Mini Multi-Pin I/O Connectors Not Applicable Frequency Response Not Specified By Manufacturer Signal-to-Noise Ratio Not Specified By Manufacturer Distortion Not Specified By Manufacturer Power Requirements 7.4V DC (battery), 9V DC (AC Adapter)  Supplied from BP-900 battery or AD-0910 AC adapter Power Consumption 270 mA Dimensions 8.26 x 2.59 x 5.98" (210 x 65.9 x 152mm) (WxHxD) Weight 1.38 lb (630 g)

Description: Details iShopping.pk brings you the best price for Toa Electronics Infrared Delegate Station (TS-902) with express shipping all over Pakistan.   The TOA 900 series conference system is a professional solution for wireless conference microphone operation in boardrooms, panel discussion groups, meeting halls, etc. The 900 series features secure infrared technology for wireless operation without bulky cables and wiring configurations. A functional system consists of a TS-900UL system controller, a TS-905 or TS-907 infrared transceiver and up to ninety-six TS-901 and TS-902 delegate / chairperson remote microphone stations. The TS-902 chairperson station is a remote microphone station used in the 900 series wireless conference system. The delegate station enables talkers to speak freely and remotely while monitoring the entire conversation. Optional long and short length gooseneck microphones are sold separately. Additional features include a built-in speaker, a headphone output with volume adjust and Talk button.   Features: Voting Keys Voting keys are featured to Start, End and Cast votes. Infrared Wireless Operation The 900 series conference systems feature infrared wireless operation for less bulk and easier configuration and setup. Headphone Output Built-in Headphone output with volume adjust is provided.   Specifications: Inputs Microphone Terminal: XLR-4-31 type  for optional TS-903 or TS-904 gooseneck microphones Outputs Headphone: 1/8" (3.5mm) Mini Multi-Pin I/O Connectors Not Applicable Frequency Response Not Specified By Manufacturer Signal-to-Noise Ratio Not Specified By Manufacturer Distortion Not Specified By Manufacturer Power Requirements 7.4V DC (battery), 9V DC (AC Adapter)  Supplied from BP-900 battery or AD-0910 AC adapter Power Consumption 270 mA Dimensions 8.26 x 2.59 x 5.98" (210 x 65.9 x 152mm) (WxHxD) Weight 1.38 lb (630 g)

Description: Details iShopping.pk brings you the best price for Toa Electronics Infrared Delegate Station (TS-802) with express shipping all over Pakistan.   The TOA 800 series conference system is a professional solution for wireless conference microphone operation in boardrooms, panel discussion groups, meeting halls, etc. The 800 series features secure infrared technology for wireless operation without bulky cables and wiring configurations. A functional system consists of a TS-800UL system controller, a TS-905 or TS-907 infrared transceiver and up to sixty-four TS-801 and TS-802 delegate / chairperson remote microphone stations. The TS-802 delegate station is a remote microphone station used in the 800 series wireless conference system. The delegate station enables talkers to speak freely and remotely while monitoring the entire conversation. Optional long and short length gooseneck microphones are sold separately. Additional features include a built-in speaker, a headphone output with volume adjust and Talk button.   Features: Infrared Wireless Operation The 800 series conference systems feature infrared wireless operation for less bulk and easier configuration and setup. Headphone Output Built-in Headphone output with volume adjust is provided.   Specifications: Inputs Microphone Terminal: XLR-4-31 type  for optional TS-903 or TS-904 gooseneck microphones Outputs Headphone: 1/8" (3.5mm) Mini Multi-Pin I/O Connectors Not Applicable Frequency Response Not Specified By Manufacturer Signal-to-Noise Ratio Not Specified By Manufacturer Distortion Not Specified By Manufacturer Power Requirements 7.4V DC (battery), 9V DC (AC Adapter)  Supplied from BP-900 battery or AD-0910 AC adapter Power Consumption 270 mA Dimensions 8.26 x 2.59 x 5.98" (210 x 65.9 x 152mm) (WxHxD) Weight 1.38 lb (630 g)