Diameter thickness

Thickness:2.8-3.1mm Fixing Hole Diameter: 3.8MM Material: Acrylic

Zebra GK888T Desktop Label Printer / Barcode Printer Specifications Printer Specifications Resolution : 203dpi / 8 dots per mm Memory: Standard 8MB SDRAM; 8MB Flash Print Width: 4.09"/104mm Print Length: 39"/990mm Print Speed : 4" per sec/102mm per sec Media Sensors: Transmissive and reflective Media Characteristics Maximum label and liner length: 39"/900mm Maximum label and liner width:4.25"/108mm Maximum roll diameter: 5"/127mm O.D. on a 1"/25.4mm I.D. core Core diameter: 1"/25.4mm to 1.5"/38mm Using media adaptor plates(included): 2.0"/50.8mm,2. 5"/63.5mm and 3"/76.2mm Media thickness: 0.003" /(0.08 mm) to 0.0075" /(0.19 mm) Media types: Roll-fed or fanfold, die cut or continuous, deirect thermal labels with or without black mark, tag stock Ribbon Characteristics Outside diameter: 1.36"/35mm Standard length: 244"/74m using 0.000328" ribbon thickness Width: 1.30"/33mm to 4.30"/110mm Ribbon setup: Ribbon wound ink side out Core I.D.: 0.5"/13mm Operating Characteristics Environmental Operating temperature: 40° F /5° C to 105° F /41° C Storage temperatures: -40° F/-40° C to 140° F /60° C Operating humidity: 10-90% non-condensing R.H. Storage humidity: 5-95% non-condensing R.H. Electrical Auto-detecable (PFC Compliant) 100-240 VAC, 50-60 Hz Agency approvals CCC, BSMI Physical Characteristics Width: 7.9"/201mm Depth: 8.2"/208mm Height: 6.7"/170mm Weight: 3.0Ibs/1.4kg Communication and Interface Capabilities Centronics parallel (36 pin) connector ports RS-232 serial inferface USB 1.1v

The Zebra GK420d monochrome desktop direct thermal label printer comes equipped with Ethernet and USB ports, prints 5" per second in black at 203 dpi, and can be used to print labels, tags, receipts, or other media up to 4.09" wide. Direct thermal printers use heat instead of ink and are typically smaller, quieter, faster, and more energy-efficient than dot-matrix printers. The GK420d has a maximum print speed of 5" per second at 203 dpi (dots per inch) and prints labels up to 39” long. The 32-bit processor combined with the 8 MB of SDRAM memory and 4 MB of flash memory offers fast first label printing with extensive media graphics. The Ethernet port enables the printer to be connected to a wired computer network (Ethernet cord sold separately). A USB port and an included USB cable provide connectivity to a computer or another device. EPL and ZPL programming languages are standard. The GK420d printer's double-walled casing is made of ABS (acrylonitrile butadiene styrene), which helps resist impact. An open-access design facilitates media loading. A reflective sensor allows the printer to identify the gaps, holes, notches, or black marks between labels to print the labels accurately. A transmissive sensor enables it to detect when a roll of media has run out. The auto-detectable power adapter can accept AC power between 100 and 240 volts. This printer is suitable for use with black bar, black mark, continuous, continuous receipt, die-cut, fanfold, gap, notched, perforated, receipt, roll-fed, tag, or tag stock media (all sold separately). The maximum outside diameter for rolls is 5". Specifications Resolution 203 dpi (8 dots/mm) Memory 8 MB SDRAM; 4 MB flash Print Width 4.09" maximum Print Length 39" Print Speed 5"/second Media Sensors Reflective, transmissive Label and Liner Width Range 0.75" to 4.25" Label and Liner Length Range 0.38" to 39" Maximum Roll Diameter 5" Core Diameter 0.5", 1.0", and 1.5" Media Thickness Range 0.003" to 0.0075" Media Types Black bar, black mark, continuous, continuous receipt, die-cut, fanfold, gap, notched, perforated, receipt, roll-fed, tag, tag stock Operating Temperature 40 to 105 degrees F Operating Humidity 10 to 90 percent non-condensing Storage Temperatures -40 to 140 degrees F Storage Humidity 5 to 95 percent non-condensing Voltage and Frequency Auto-detecting 100-240 VAC, 50-60 Hz Dimensions 6 x 6.75 x 8.25 inches (H x W x D)* Weight 3.1 lb. * H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Label printers, also known as label makers, can be used to print labels, tags, receipts, and other similarly sized media. Direct thermal and thermal transfer label printers use heat instead of ink to print on coated thermal media. A parallel, serial, or USB port allows a label printer to be connected to a computer. An Ethernet port or wireless capabilities may enable it to be connected to a computer network. Label printers can be used in a variety of commercial environments, including warehouses, laboratories, retail stores, health care facilities, and shipping and receiving facilities.

CT-S601 Citizen Thermal Receipt Printers The New CT-S601 is your Next Best Printing Solution for your receipt applications as it not only offers more features for less price than any other competitive model, but also it is fully compatible with previous Citizen models - making the CT-S601 the Best Value in any class! Product Overview The New CT-S601 is your Next Best Printing Solution for your receipt applications as it not only offers more features for less price than any other competitive model, but also it is fully compatible with previous Citizen models - making the CT-S601 the Best Value in any class! Features High-speed (200 mm/s) printing Compact design can be installed anywhere Versatile design supports 3-inch (83/80 mm) and 2-inch (60/58 mm) wide paper rolls Built-in power supply or AC adaptor types available Printer status and errors indicated by 3 LEDs and a buzzer Equipped with a fast and quiet cutter Easy to clear cutter jams Interchangeable interfaces Built-in cash drawer kick-out interface Memory switches make customization possible Store user-defined characters and logos in user memory Barcode and 2D barcode printing supported 2-color printing supported (when specified paper used) Driver and utility software included Can be desktop or wall mounted LCD Display LED indicates the printer's status, types of errors, and messages Easy maintenance of printer head and cutter with using of LCD and LED messages LED Green: Power is on. It flashes when data is incoming or a memory error has occurred. Red: Operates in special modes or in errors. Orange: Paper is low (paper near-end) or print head is hot. Button FEED button: Not only to feed the paper, but to set for memory switches and running self-printing. Specifications Model CT-S601 Print width* 80mm/640 dots, 72mm/576 dots, 64mm/512 dots, 54.5mm/436 dots, 54mm/432 dots, 52.5mm/420 dots, 48mm/384 dots, 45mm/360 dots, 48.75mm/390 dots, 68.25mm/546 dots Dot density 8 × 8 dots / mm (203 dpi) Printing speed Max. 200 mm/sec, 1600 dots lines/sec. (fastest, print density 100%) Number of print columns† Font Maximum number of characters (columns) Dot configuration (dots) 83mm 80mm 60mm 58mm Font A 53 48 36 35 12 × 24 Font B 71 64 48 46 9 × 17 Font C 80 72 54 52 8 × 16 Character size (W × H)‡ Font A: 1.50 × 3.00 mm Font B: 1.13 × 2.13 mm Font C: 1.00 × 2.00 mm Character type Alphanumeric, International, PC437/850/852/857/858/860/863/864/865/866/WPC1252/Katakana/Thai code 18 Operation panel 3 LEDs, Feed button User memory 384 Kb (capable of storing user-defined characters and logos) Barcode type UPC-A/E, JAN(EAN) 13/8 columns, ITF, CODE 39, CODE 128, CODABAR (NW-7), CODE 93, PDF417, QR Code Line spacing 4.23mm (1/6 inch) (changeable using commands) Paper roll Width Paper roll: 83+0/-1 mm, 80+0/-1 mm, 60+0/-1 mm, 58 mm+0/-1 × F 80 mm Thickness 65 to 75µm (core tube diameter: inner 12mm / outer 18mm) 75 to 150µm (core tube diameter: inner 25.4mm / outer 32mm) Interface Serial (RS-232C compliant), Parallel (IEEE1284 compliant), USB, USB with hub, Ethernet, powered USB External device port Cash drawer kick-out Buffer size 4K bytes / 45 bytes Pupply voltage DC 24V ± 5% Power consumption Approx. 45 W (normal printing), 3W (standby) Power source Rated input: AC 100 to 240 V, 50/60 Hz, 150 VA Rated output: DC24 V, 2.1 A Weight (approx.) CT-S601S (Built-in power supply type): 2.0kg CT-S601A (AC adaptor type): 1.6kg Outer dimensions (W × D × H) CT-S601S (Built-in power supply type): 145 × 192 × 148 mm CT-S601A (AC adaptor type): 145 × 192 × 120 mm Operating temperature and humidity 5 to 45 °C, 10 to 90 % RH (no condensation) Storage temperature and humidity -20 to 60 °C, 10 to 90 % RH (no condensation) Reliability Print head life: 150 km, 200 million pulses (at normal temperature and humidity using recommended paper) Auto cutter life: 2 million cuts (at normal temperature and humidity using recommended paper) Safety standards§ UL, C-UL * When paper width is 83, 80, 60 or 58 mm. † The number of printable column is selected using a memory switch. The number of columns noted in this able refer to typical models. The number of columns varies depending on specifications. ‡ Characters appear small because the dimensions include a blank area surrounding each character. § Compliant if the Citizen Systems AC adapter (36AD2/36AD3) is used.

Little giant care label printer Industrial printer for care label? You have anohter choice for care label printer, SBARCO T43R. SBARCO releases a model, T43R, for care label printer total solution. T43R is equipped exclusive cutter, label stacker and label roll holder which make the care label be printed and cut correctly without shifting and sticking problem during the printing process. The minimum cutting length is 10mm. 300 dpi printing resolution can print very fine characters, graphics and barcode. T43R overturns the concept of care label printer, a desktop printer can do the same work as industrial printer, even it is the most cost-effective. Total solution for care label printer 300 dpi printhead resolution for finest characters and graphics Exclusive label holder, stacker and cutter No shifting, no sticking in printing care label LCD monitor for selecting stored care label forms for standalone operation 10mm min. cutting length No sticking on 102mm. in printing and cutting width SD card and internal memory support hundreds forms The most cost-effective care label printer PRINT Resolution 300 dpi (12 dots/mm) Mode Thermal transfer Print speed 1 to 3 ips (25.4 to 76.2 mm) Max. print length 150” (3810 mm) Max. print width 4.1” (104 mm) Min. cutting length 0.39" (10mm) CPU 32 bit CPU MEMORY 8MB SDRAM 4MB Flash ROM SD slot for expansion, up to 32GB DISPLAY Backlight LCD display, 128 x 64 dots CONTROL PANEL 4 multiple functional LED light buttons, including error light SENSORS Reflective sensor Cover open sensor, ribbon sensor, label sensor COMMUNICATION Serial, USB master/slave, Ethernet (option) AUDIO Buzzer warning sound POWER External universal switching power supply BARCODE 1D Code39 stand or extended, Code39 with check digit, Code93, Code128 UCC, Code128 Auto A,B,C mode, EAN8, EAN8/13 2&5 digit add-on, EAN13, Interleaved 2 of 5, Interleaved 2 of 5 with check digit, Interleaved with human readable check digit, UCC/EAN 128, UPC-A, UPC-A 2&5 digit add-on, UPC-E, UPC-E 2&5 digit add-on, UPC Interleaved 2 of 5 2D PDF417, Maxicode, Data Matrix, QR code INTERNAL FONT 5 internal expandable bitmap fonts (alpha-numeric) 2 internal expandable bitmap fonts (numeric only) Downloadable soft font 4 directions: 0, 90, 180 and 270 degrees GRAPHICS PCX, Direct binary graphic CARE LABEL Type Care label Width 0.59”~4.33” (15 mm~110 mm) Thickness Max. 0.0059”(0.15 mm) Core diameter 3" (76.2mm) Max. roll diameter 10” (254 mm) RIBBON Type Outside coating resin ribbon Width 1”~4.3” (25.4 mm~110 mm) Max. length 110 M Max. OD 1.535” (39 mm) ID 0.5” (12.7 mm) ENVIRONMENT Operation 5°C ~45°C (40°F~104°F) Storage -20°C~50°C (-4°F~122°F) HUMIDITY Operation 10%~90% non-condensing Storage 5%~95% non-condensing DIMENSION Width 7.83” (200.00 mm) Length 10.36” (263.19 mm) Height 7.41” (188.29 mm) Weight 3.7 KG (with stacker) FACTORY DEFAULT 3" Cutter, stacker, label roll holder OPTION Ethernet printer server

this package is mostly for the 2ea rods to use as a bed stabilizer rails for 3D printer or CNC machines. The rods are straight and the right diameter for use with LM8UU bearings. OD 8mm x 300mm Cylinder Liner Rail Linear Shaft Optical Axis - Material: bearing steal,GCr15 - Hardness: About HRC58° - Precision: g6 - Surface roughness: Below 1.5µM(Rmax) - Surface hard-thickness: 0.8µ~3mm - Outer diameter: 8mm - Length: 300mm - Staightness: Below 5µM/100mm - Hard chrome thickness: 3.0µM(Rmax) package included: 1pcs Linear Guides Light Rods Plated Shafts 8MM 30CM

Linear Guides Rods Plated Shafts 8MM 39CM this package is mostly for the 2ea rods to use as a bed stabilizer rails for 3D printer or CNC machines. The rods are straight and the right diameter for use with LM8UU bearings. OD 8mm x390mm Cylinder Liner Rail Linear Shaft Optical Axis - Material: bearing steal,GCr15 - Hardness: About HRC58° - Precision: g6 - Surface roughness: Below 1.5µM(Rmax) - Surface hard-thickness: 0.8µ~3mm - Outer diameter: 8mm - Length: 390mm - Staightness: Below 5µM/100mm - Hard chrome thickness: 3.0µM(Rmax) package included: 1pcs Linear Guides Light Rods Plated Shafts 8MM 39CM

Zebra incorporated extensive customer feedback, as well as the legacy of our industry leading Stripe and S4M printers, to create the new ZT200 Series family of printers with elegant space saving design, effortless setup, intuitive user operation, and ease of service and maintenance. General Information Manufacturer Part Number ZT22042-D01000FZ Manufacturer Website Address www.zebra.com Manufacturer Zebra Technologies Corporation Product Model ZT220 Product Name ZT220 Industrial Printer Product Series ZT200 Brand Name Zebra IO Expansions Media Types Handling Media Thickness 10 mil Maximum Roll Diameter 8 Media Type Continuous Label Media Sensor Transmissive Media Sensor Label Core Size 3 Maximum Label Width 4.50 Maximum Label Length 39 Memory Flash Memory 128 MB Standard Memory 128 MB Memory Technology DRAM Miscellaneous Package Contents ZT220 Industrial Printer Power Cord with US Plug

Kaloc DS90 Single Monitor Desk Mount - Articulating Gas Spring Multi Way Stand - Fits 17 - 32 Inch Screens Price in Pakistan The DS90 is a modern, light-weight yet durable monitor mount which built with latest technology that capable to hold up to 9kg/19.8lbs of monitor panel. The sophisticated black color is easily blend into vast variety of working environment or interior furniture. It is available with multiple arm movement such as moves up, down, stretch forward and backward which comes at ease for the most ergonomic setup. Users able to access hassle free of 360° monitor rotation, -50°~ +35° tilt angle, 180° swivel and vertically height adjustments. All cables could be aligned along the compartment for tidy and safety reason.   PRODUCT HIGHLIGHTS - Gas-strut arm make counterbalance setup at ease - Multiple movement for maximum ergonomic setup - Compartment for cable management - Both grommet and desk clamp mounting are available - Support monitors’ weight from 2-9kg   Technical Data Type Desk Mount Material Aluminium, Metal, Plastic Recommended Screen Size 17” – 32” Rated Weight Capacity 2 - 9 kg VESA Standard (mm) 75x75, 100x100 Tilt -50°~+35° Swivel -90°~+90° Rotate 360° Arm Extend Max. 542 mm Height 100~420 mm Clamp Thickness 15-95 mm Clamp Clearance Min. 60 mm Grommet/ Hole Mount Diameter 10~50 mm Height Adjustable Yes Cable Management Yes Product Dimension 105x420x542 mm Package Dimension (LxWxH) 41x26x12 cm Weight Approx. 2.7kgs   Package includes: 1 x Kaloc DS90 Monitor Desk Mount, with screws & fittings   HOW TO INSTALL?    

Speed-X 200 Plus Thermal Receipt Printer USB+LANSP-X 200 Plus Is A Thermal Printer With Basic POS (Point Of Sale) Functionality And Provides More Reliability And High Demanding Features. It Is Capable Of Printing Both Text And Graphics Up To 300mm Per Second. SP-X 200 Plus Is A Business Grade Thermal Receipt Printer Which Is Both Low On Budget And Excellent In Quality.SpecificationInterfaces USB+LanPrint Command ESC/POSPrint Method Thermal Line PrintingPrint Speed 300mm/secNo. of Total Dots 512 dots/LineAuto Cutter Full or Partial cutPrint Width 72mmPrint Font 12 x 24; 24x 24Data Buffer UP to 5K bytesCompatible OS Win Vista/Win7/Window XP /Win8/Win 10, Linux/Android Compatible with ESPON,SAMSUNGType Thermal Roll PaperWidth 80±0.1mmRoll Diameter φ≤83mmPaper Thickness 0.06-0.08mmAdapter Voltage DC24V/2.5ACash DrawerControl 12V/1APrint Reliability 100kmPackage Includes:1x User Manual1x Driver DiskCables1x SP-X 200 Plus