Dc boost module

DESCRIPTION Feature: Can be easily installed in a variety of small devices. Use Micro USB input,USB charger or mobile power through the data line,to get 9V,12V,15V,18V,24V Portable and easy to use. Ultra wide input and output voltage, high conversion efficiency. Specifications: Product size:3cm×1.7cm Input voltage: 2 v – 24v Max output current: 2A non continuous Recommended continuous max 1A Max output voltage: > 28 V (recommended for use within 26V) Efficiency: > 93% (efficiency is related to the differential pressure of input and output). Note: 1) this module is a boost module, the output voltage is greater than the input voltage 2) the peak current output current is no more than 2A Mention that you found this ad on DealMarkaz.pk when you call.

DIY a power supply, 12V can input and output can 12-50V adjustable. 2. the power supply for your electronic device, according to your system can set the output voltage value. 3. as the car power supply for your laptop, PDA or a variety of digital products supply.

Module based on:TP4056 The module can manage battery charging and discharging, and also has built in boost converter to boost the voltage to match load conditions Charging voltage: 4.2V DC Charging current: Max. 1A Discharging current: Max. 2A Input voltage: 4.5-8V DC Output voltage: 4.3-27V DC (Continuously adjustable) Size: 3.3x2.3cm/1.3x0.91"

Module Properties: non-isolated step-up module (BOOST) 65 * 36.5 * 23 (length * width * high) (mm) Input voltage:10-32V Output voltage: 12-35V (adjustable) Output Current: 5A (MAX) Input Current: 10A (MAX) (Please enhance heat dissipation if more than 10A) Output power: natural cooling 100W (MAX), enhance heat dissipation 150W (MAX) Easy to drive 65W 90W dual-core notebook. Use a 12V battery drive 19V 3.42A notebook, the module temperature about 45c Conversion efficiency: 94% (measured at Input 16V, output 19V 2.5A) Output Ripple: 2% (MAX) 20M-bandwidth Operating Temperature: Industrial (-40c to +85c) (ambient temperature exceeds 40c, lower power use, or to enhance heat dissipation) Full load temperature rise: 45c No-load current: 25mA typical Voltage regulation: 0.5% Dynamic response speed: 5% 200uS Short circuit protection: None (Please Install fuses and protection circuits at Input port.) Input Reverse Polarity Protection: None (Please Series diode at the input port.)Some Applications: 1. DIY an output adjustable vehicle power supply, connect the 12V input, and output could be 14-35V(adjustable freely), However, the output voltage can not be less than the input voltage. 2. Car laptop power supply: connected to 12V power supply, output voltage regulation as your notebook need.

W1209 Temprature controller with casing Temperature control mode: ON / OFF Temperature range:-50-110 ResolutionWhen temperature is 0.1 the resolution is -9.9~99.9, other temperature segment is 1 Control accuracy: 0.1 Hysteresis accuracy: 0.1 Refresh rate: 0.5S High temperature protection 0-110 Supply voltage: for DC 12V Static current: ≤ 35MA, attract current ≤ 65MA Output voltage: for DC 12V Output power: 10A relay Measurement input: NTC (10K 0.5%) Waterproof Sensor Environmental requirements: -10 ~ 60 Humidity 20% -85% Digital Led Thermostat Temperature Control DC 12V Adapter Thermometer Thermo Controller Switch Module + NTC Sensor W1209

Now Buy Online Shipping All Across Pakistan COMPANY: MATRIX ELECTRONICS CONTACT PERSON: FAIZAN MUNIR Mobile:0 3002785860 w w w .matrixelectronic . com Email : sales @ matrixelectronic . com Email : info @ matrixelectronic . com 2 CHANNEL 5V RELAY MODULE Description: The 2 channel 5V relay module provides 2 optically isolated inputs that accept a wide range of voltage, including the 3VDC and 5VDC signals available on the Arduino. This is a great way to switch on or off AC or DC loads using your Arduino. The relays are single-pole double-throw (SPDT) and are rated for 10A @ 250VAC. The ground for the relay coils is separate from the ground for the input signals. This, along with the optical isolation, provides a total galvanic isolation between the input and output. The two grounds could be joined together if desired with the included jumper. The relay coils run on 5VDC, and the module has screw-terminal blocks for sturdy and reusable attachments for the external load. The signal and power inputs run through the male single-row header.

Reliable and fast data transfer. With this cable, you can connect your power bank to router. Thus, when power cut, you can use your power bank to supply your router! Internet blackout solve baby, continuous Artifact Use mobile power,charg treasure or notebook usb interface Drive after a power outage or optical router cat online Via computer USB jack to power other devices. Such as: USB lights, USB fan, Cartoon watches, radiator, 5V mini speakers, USB HUB, etc. Interface: USB transfer DC5.5 * 2.1MM(2.5MM) Input voltage: DC 5V Output voltage: DC 9V and 12V Max Color: Black Material: ABS Output current: For 800mA or less application is recommended Package includes: 1 X Conversion Line Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

Using the module:Connect micro USB cable for power, or 5V DC to pads marked IN+ and IN- on the left-hand side of the module Connect cell to charge to B+/B- pads on the right-hand side of the module. A load (something for the battery to power) can be connected to the OUT+/OUT- pads on the right-hand side Important! Disconnect load when charging The red LED indicates charging in progress, the green LED indicates charging has finished. Never charge your battery at a rate greater than 1C. 2. It is better thanthe charging current is 37% of the battery capacity. If you charge the battery of 1000mAh, acurrent of 400mAh is enough. 3. The connection wire should not be too thick. 4. Make sure the connect point is good. 5. If the input voltage is too high, like 5.2v, the current will be less than 1000mA, it is normal. It is a protection function, auto-subtract the charging current to avoid burn damage to thechip. 6. NO Reverse polarity.Features:Led indicator: red is charging Green is fully charged. Current Protection: Yes Inversed polarity: NO. Use mature charging chip TP4056 for simple peripheral circuits, good protection performance, and high charging accuracy. Fully machinery automated processing, all patch parts manufacturing.

The range of w1209 digital temperature controller is -50 to 110C. Resolution of temperature module at -9.9 to 99.9 is 0.1C The resolution of the module at all other temperatures is 1C. The accuracy of the measurement of the W1209 Temperature Control Switch is 0.1 C. Its control accuracy is 0.1C. The module refresh rate is 0.5 Sec. The power controlling module input power is 12V. NTC is its measuring inputs. Its output consists of 1 channel relay and its capacity is 10A.

Brand: Evalley Shop USB 5V to 9V, 12V voltage booster 5.5x2.1mm & 4x1.7mm barrel jack Module Converter DC to DC. You can connect your power bank 5V it will convert it to 12V for PTCL/Fiber Modem router etc. Thus, when power cut, you can use your power bank to supply your router! Internet blackout solved, continuous power supply Artifact Via computer USB jack to power other devices. Such as: USB lights, USB fan, Cartoon watches, radiator, 5V mini speakers, USB HUB, etc.​​​​​​​Output current is 1000mA 1A real many similar modules in markets are just 700mA or less.Note: To achieve best results your power bank must be 5V with 2A or 3A. With 1A, output may not be stable.Interface: USBtransfer DC5.5 * 2.1MM & 4mm*1.7Input voltage: DC 5VOutput voltage: 9V, 12V

KQ-130F Power line carrier module Description: Communication over Power Line. This module is designe to communicate between two device through Power line(e.g 220V power line) without any extra components. Working rate:120~135KHZ Interface baud rate:9600bps, the true baud rate is 100bps,250-byte buffer Temperature:-25 degree~+70 degree Humidity: 90% Power:DC +5V Receiver:11mA Transmitter:300mA Now Buy Online Shipping All Across Pakistan COMPANY: MATRIX ELECTRONICS CONTACT PERSON: FAIZAN MUNIR Mobile:03002785860 www.matrixelectronic.com Email : sales@matrixelectronic.com Email : info@matrixelectronic.com

Now Buy Online Shipping All Across Pakistan COMPANY: MATRIX ELECTRONICS CONTACT PERSON: FAIZAN MUNIR Mobile:0 3002785860 w w w .matrixelectronic . com Email : sales @ matrixelectronic . com Email : info @ matrixelectronic . com FLAME SENSOR MODULE RED Description: flame wavelengths between 760 nm to 1100 nm infrared is most sensitive. Module has two outputs: 1, AO, analog output, real-time output voltage signal on the thermal resistanc 2, DO, when the temperature reaches a certain threshold, the output high and low signal threshold adjustable via potentiometer Power supply: DC 3-5.5VAnalog

Now Buy Online Shipping All Across Pakistan COMPANY: MATRIX ELECTRONICS CONTACT PERSON: FAIZAN MUNIR Mobile:03002785860 w w w .matrixelectronic . com Email : sales @ matrixelectronic .com Email : info @ matrixelectronic .com 8 Channel 5V Relay Module Description: This board provides 8 optically isolated inputs that accept a wide range of voltage, including the 3VDC and 5VDC signals available on the Arduino. This is a great way to switch on or off AC or DC loads using your Arduino! The relays are single-pole double-throw (SPDT) and are rated for 10A @ 250VAC. The ground for the relay coils is separate from the ground for the input signals.

Whether you’re a gamer, PC enthusiast, or overclocker, you’ll appreciate the combination of the GAMMIX D30’s edgy wing-shaped design and excellent speeds of up to 4600MHz. What’s more, it features Intel® XMP 2.0 profiles for hassle-free overclocking when you need an extra boost. Edgy Wing-Shaped Design The GAMMIX D30 features an edgy wing-shaped design that exudes a sense of power and stealth. It’s encased in a gray, glossy heatspreader that contrasts beautifully with your choice of a translucent red or black top cover. The Performance to Win GAMMIX D30 brings you excellent performance with speeds ranging from 2666MHz to 4600MHz and supports Intel® X299 2666MHz and AMD AM4 / Ryzen platforms. Overclocking with Intel® XMP 2.0 Intel® Extreme Memory Profile (XMP) 2.0 makes overclocking a snap and enhances system stability. Instead of adjusting individual parameters in BIOS, you can do it right through the operating system. Top-Quality Chips for Enhanced Durability The GAMMIX D30 is built with high-quality chips selected through a strict filtering process. It also uses top-quality PCBs (Printed Circuit Board) that effectively extend the lifespan of the memory module.

Whether you’re a gamer, PC enthusiast, or overclocker, you’ll appreciate the combination of the GAMMIX D30’s edgy wing-shaped design and excellent speeds of up to 4600MHz. What’s more, it features Intel® XMP 2.0 profiles for hassle-free overclocking when you need an extra boost. Edgy Wing-Shaped Design The GAMMIX D30 features an edgy wing-shaped design that exudes a sense of power and stealth. It’s encased in a gray, glossy heatspreader that contrasts beautifully with your choice of a translucent red or black top cover. The Performance to Win GAMMIX D30 brings you excellent performance with speeds ranging from 2666MHz to 4600MHz and supports Intel® X299 2666MHz and AMD AM4 / Ryzen platforms. Overclocking with Intel® XMP 2.0 Intel® Extreme Memory Profile (XMP) 2.0 makes overclocking a snap and enhances system stability. Instead of adjusting individual parameters in BIOS, you can do it right through the operating system. Top-Quality Chips for Enhanced Durability The GAMMIX D30 is built with high-quality chips selected through a strict filtering process. It also uses top-quality PCBs (Printed Circuit Board) that effectively extend the lifespan of the memory module. Looking for any other Brand RAM  Click Here. Looking for an awesome Chassis  Click Here. Explore awesome GPUs, Chassis, SSDs, and much more  Click Here.