Data transmit

Using high-speed USB3.0 transmission interface, USB flash drive can transmit data quickly. Featuring compact and lightweight, the U disk can be carried conveniently. USB flash drive can transmit data quickly due to the use of high-speed USB3.0 transmission interface. And you can carry the U disk conveniently due to its compact and lightweight features. The use of high-speed USB3.0 transmission interface helps USB flash drive transmit data quickly. The features of compact and lightweight enables the U disk to be carried conveniently. The USB flash drive uses high-speed USB3.0 transmission interface, which helps transmit data quickly. And it features compact and lightweight, which allows you to carry it conveniently. Owing to the use of high-speed USB3.0 transmission interface, USB flash drive can transmit data quickly. In addition, it features compact and lightweight, which is convenient for you to carry. U disk is convenient for you to use without driver because it adopts plug and play design. USB flash drive adopts plug and play design, allowing you to use it conveniently without driver. You can use this U disk conveniently without driver because of its plug and play design.

Description: Details iShopping.pk brings you the best price for TP-Link 300Mbps Wireless N Ceiling Mount Access Point (CAP300) with express shipping all over Pakistan.   Specification: HARDWARE Interface Fast Ethernet (RJ-45) Port *1（Support IEEE802.3af PoE） Button Reset, FIT/FAT Power Supply PoE or external 9VDC/0.6A power supply Power Consumption 5W Wireless Standards IEEE 802.11n, IEEE 802.11g, IEEE 802.11b Dimensions (W x D x H) 7.1 x 7.1 x 1.9 in. (180*180*47.5mm) Antenna Type Internal 2* 3dBi Omni Mounting Ceiling /Wall Mounting (Kits included) Physical Security Lock Kensington Lock Slot Watch Dog Yes WIRELESS Wireless Standards IEEE 802.11n, IEEE 802.11g, IEEE 802.11b Frequency 2.4-2.4835GHz Signal Rate 11n: Up to 300Mbps(dynamic) 11g: Up to 54Mbps(dynamic) 11b: Up to 11Mbps(dynamic) Reception Sensitivity 300M: -71dBm@10% PER 150M: -75dBm@10% PER 54M: -78dBm@10% PER 11M: -93dBm@8% PER 6M: -92dBm@10% PER 1M: -96dBm@8% PER Transmission Power CE: FCC: SOFTWARE Wireless Functions Multiple SSIDs (Up to 8 SSIDs) Enable/Disable Wireless Radio Automatic Channel Assignment Transmit Power Control (Adjust Transmit Power on dBm) QoS(WMM) Reboot Schedule Wireless Schedule Wireless Statistics based on SSID/AP/Client Wireless Security Access Control Wireless Mac Address Filtering Wireless Isolation Between Clients WPA / WPA2-Enterprise,WPA-PSK / WPA2-PSK SOFTWARE FEATURE IN FAT MODE Wireless Functions Multiple SSIDs (Up to 8 SSIDs) Enable/Disable Wireless Radio Automatic Channel Assignment Transmit Power Control (Adjust Transmit Power on dBm) QoS(WMM) Reboot Schedule Wireless Schedule Wireless Statistics based on SSID/AP/Client Wireless Security Access Control Wireless Mac Address Filtering Wireless Isolation Between Clients SSID to VLAN Mapping WPA / WPA2-Enterprise,WPA-PSK / WPA2-PSK SOFTWARE FEATURES IN FIT MODE Wireless Functions Multiple SSIDs (Up to 8 SSIDs) Enable/Disable Wireless Radio Automatic Channel Assignment Transmit Power Control (Adjust Transmit Power on dBm) WMM Reboot Schedule Wireless Schedule Wireless Statistics based on SSID/AP/Client Load Balance Band Steering Wireless Security Captive Portal Authentication Access Control Mac Address Authentication Wireless Isolation Between Clients SSID to VLAN Mapping WPA / WPA2-Enterprise,WPA-PSK / WPA2-PSK OTHERS Certification CE, FCC, RoHS System Requirements Microsoft Windows 10/8/7/Vista/XP Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing   Features: • Hardware wireless controller enable administrators to easily manage hundreds of CAPs • Support Power over Ethernet (802.af) for convenient and affordable installation • Simple mounting design for easy attachment to a wall or ceiling • Captive portal provides on convenient method of authentication for Wi-Fi guests • Enterprise class Wi-Fi security help to decrease network security threats • Multi-SSID divides multiple wireless networks for different user types • FAT/FIT mode switchable providing a range of network possibilities • 300Mbps wireless data rate for uninterrupted wireless connection • Rate limit per SSID to restrict the bandwidth of each client • Access Control restricts sets limitations for client access to the specified network segment • Reboot Schedule enables all APs to automatically reboot within a specified time • WPA/WPA2-enterprise, 802.1X with RADIUS secure authentication and rogue access point detection ensure the security of WLAN network • Multi-SSID divides multiple wireless network for different user types • Load balance ensures large business networks with smooth a network experience • Compatible with 802.11 b/g/n products • Durable housing prevents dust from dropping onto the PCB through bypass louver to provide long-term, unhindered operation   Introducing the New Auranet CAP Series Wi-Fi Solution Ultimate Network Security and Stability The businesses of today are demanding ever greater flexibility and security from their wireless networks to keep up in a world where things move fast. TP-Link’s new Auranet CAP series delivers that and more. CAP access points work together with Auranet Wireless Controllers to provide scalable solutions with exceptional Wi-Fi performance and easy deployment. Centralized Management and Automatic Discovery Manage hundreds of access points at once using Auranet Wireless Controllers. Adding new access points couldn’t be simpler with automatic discovery. Controllers detect access points, apply your configuration settings and begin to centrally manage them as soon as they join the network, allowing you to concentrate on what matters. Complete Scalability Without the License Fees Expand your network when the time is right, without the complications. With no license fees at any stage, choose from a range of wireless controllers to match the scale of your ambitions.   High Specification Controller Hardware Auranet Wireless Controllers contain a high-specification 1GHz Dual-Core processor that guarantees network stability. Together with other sophisticated hardware, this provides superior reliability and wireless capabilities. Backup You Can Rely On Establish complete network stability by deploying wireless controllers in a dual-link arrangement. If one controller fails, another can take over to ensure your network remains free from disruption.

Description: Details iShopping.pk brings you the best price for TP-Link 10/100Mbps WDM Media Converter (MC111CS) with express shipping all over Pakistan.   Specification: MEDIA CONVERTER & MODULE Standards and Protocols IEEE 802.3, IEEE 802.3u Basic Function Adopts WDM technology Half/Full-Duplex transfer mode for FX port minimize the loss caused by link failure timely Extends fiber distance up to 20km (12.5 miles) Ports 1 x 100M SC/UPC port 1 x 10/100M RJ45 port (Auto MDI/MDIX) Wave Length 1550nm Tx/1310nm Rx WDM TX 1550nm WDM RX 1310nm Network Media 10BASE-T UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Network Media 100BASE-T UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Network Media 100BASE-FX Single-mode Fiber LED Indicators PWR, Link/Act Dimensions (W*D*H) 3.7 x 2.9 x 1.1 in. (95 x 73 x 27 mm) Power Supply External Power Adapter Max Power Consumption 2.49W Safety & Emission FCC, CE, RoHS Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing   What This Product Does The MC111CS is a media converter designed to convert 100BASE-FX fiber to 10/100Base-TX copper media or vice versa. Adopting WDM technology, MC111CS takes only one fiber cable to transmit and receive data, which will half cable cost for you. Designed with IEEE 802.3u 100Base-TX and 100Base-FX standards, the MC111CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC111CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1550nm on transferring data and at 1310nm on receiving data. So the other end device to cooperate with the MC111CS should work at 1310nm on transferring data and at 1550nm on receiving data. Another TP-LINK´s media converter MC112CS is just one of the examples to cooperate with MC111CS. Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, and front panel status LEDs. The MC111CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers(12.5 miles).

Description: Details iShopping.pk brings you the best price for TP-Link 10/100Mbps WDM Media Converter (MC112CS) with 18 months official warranty express shipping all over Pakistan.   Specification: MEDIA CONVERTER & MODULE Standards and Protocols IEEE 802.3, IEEE 802.3u Basic Function Adopts WDM technology Half/Full-Duplex transfer mode for FX port minimize the loss caused by link failure timely Extends fiber distance up to 20km Ports 1 x 100M SC/UPC port 1 x 10/100M RJ45 port (Auto MDI/MDIX) Wave Length 1310nm Tx/1550nm Rx WDM TX 1310nm WDM RX 1550nm Network Media 10BASE-T UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Network Media 100BASE-T UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Network Media 100BASE-FX Single-mode Fiber LED Indicators PWR, Link/Act Dimensions (W*D*H) 3.7 x 2.9 x 1.1 in. (95 x 73 x 27 mm) Power Supply External Power Adapter Max Power Consumption 2.41W Safety & Emission FCC, CE, RoHS Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing   What This Product Does The MC112CS is a media converter designed to convert 100BASE-FX fiber to 10/100Base-TX copper media and vice versa. Adopting WDM technology, MC112CS takes only one fiber cable to transmit and receive data, which will save half cabling cost for you. Designed under IEEE 802.3u 100Base-TX and 100Base-FX standards, the MC112CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC112CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on transferring data and at 1550nm on receiving data. So the other end device to cooperate with the MC112CS should work at 1550nm on transferring data and at 1310nm on receiving data. Another TP-Link´s media converter MC111CS is just one of the examples to cooperate with MC112CS. Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port. The MC112CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers (12.5 miles).

Description: Details iShopping.pk brings you the best price for TP-Link 10/100Mbps WDM Media Converter (MC112CS) with express shipping all over Pakistan.   Specification: MEDIA CONVERTER & MODULE Standards and Protocols IEEE 802.3, IEEE 802.3u Basic Function Adopts WDM technology Half/Full-Duplex transfer mode for FX port minimize the loss caused by link failure timely Extends fiber distance up to 20km Ports 1 x 100M SC/UPC port 1 x 10/100M RJ45 port (Auto MDI/MDIX) Wave Length 1310nm Tx/1550nm Rx WDM TX 1310nm WDM RX 1550nm Network Media 10BASE-T UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Network Media 100BASE-T UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Network Media 100BASE-FX Single-mode Fiber LED Indicators PWR, Link/Act Dimensions (W*D*H) 3.7 x 2.9 x 1.1 in. (95 x 73 x 27 mm) Power Supply External Power Adapter Max Power Consumption 2.41W Safety & Emission FCC, CE, RoHS Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing   What This Product Does The MC112CS is a media converter designed to convert 100BASE-FX fiber to 10/100Base-TX copper media and vice versa. Adopting WDM technology, MC112CS takes only one fiber cable to transmit and receive data, which will save half cabling cost for you. Designed under IEEE 802.3u 100Base-TX and 100Base-FX standards, the MC112CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC112CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on transferring data and at 1550nm on receiving data. So the other end device to cooperate with the MC112CS should work at 1550nm on transferring data and at 1310nm on receiving data. Another TP-Link´s media converter MC111CS is just one of the examples to cooperate with MC112CS. Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port. The MC112CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers (12.5 miles).

Description: Details iShopping.pk brings you the best price for TP-Link 300Mbps Wireless N Ceiling Mount Access Point (EAP115) with express shipping all over Pakistan.   Features: • Free Auranet Controller Software enables administrators to easily manage hundreds of EAPs • The user-friendly Cluster Mode allows manage up to 24 (EAP115) without requiring any extra hardware or software • Supports Power over Ethernet (802.3af) for convenient and affordable installation • Simple mounting design for easy attachment to a wall or ceiling • Captive portal provides one convenient method of authentication for Wi-Fi guests • Enterprise class Wi-Fi security help to decrease network security threats • Multi-SSID divides multiple wireless networks for different user types • EAP Controller Software enables administrators to easily manage hundreds of EAPs • Cluster management makes it easy to manage a small network by allowing up to 24 Auranet EAP115 units to act as a single cluster • Supports IEEE 802.3af PoE for convenient and affordable installation • Simple mounting design for easy attachment to a wall or ceiling • 300Mbps wireless data rate for uninterrupted wireless connection • Captive portal provides one convenient method of authentication for Wi-Fi guests • Rate limit per SSID to restrict the bandwidth of each client • Access Control restricts sets limitations for client access to the specified network segment • Reboot Schedule enables all APs to automatically reboot within a specified time • WPA/WPA2-enterprise, 802.1X with RADIUS secure authentication and rogue access point detection ensure the security of WLAN network • Multi-SSID divides multiple wireless network for different user types • Load balance ensures large business networks with smooth a network experience • Compatible with 802.11 b/g/n products • QoS function prioritizes data, voice, and video to ensure time-sensitive applications take priority over all other traffic • Durable housing prevents dust from dropping onto the PCB through bypass louver to provide long-term, unhindered operation • Adopts Low Smoke Zero Halogen (LSOH) materials for UL2043 compliance   Specification: HARDWARE Interface Fast Ethernet (RJ-45) Port *1（Support IEEE802.3af PoE） Button Reset Power Supply PoE or external 12VDC/1.0A power supply Power Consumption 5W Wireless Standards IEEE 802.11n, IEEE 802.11g, IEEE 802.11b Dimensions (W x D x H) 7.1 x 7.1 x 1.9 in. (180*180*47.5mm) Antenna Type Internal 2* 3dBi Omni Mounting Ceiling /Wall Mounting (Kits included) Physical Security Lock Kensington Lock Slot Watch Dog Yes WIRELESS FEATURES Wireless Standards IEEE 802.11n, IEEE 802.11g, IEEE 802.11b Frequency 2.4-2.4835GHz Signal Rate 11n: Up to 300Mbps(dynamic) 11g: Up to 54Mbps(dynamic) 11b: Up to 11Mbps(dynamic) Reception Sensitivity 300M: -71dBm@10% PER 150M: -75dBm@10% PER 54M: -78dBm@10% PER 11M: -93dBm@8% PER 6M: -92dBm@10% PER 1M: -96dBm@8% PER Wireless Functions Multiple SSIDs （Up to 8 SSIDs） Enable/Disable Wireless Radio Automatic Channel Assignment Transmit Power Control （Adjust Transmit Power on dBm） QoS(WMM) Rate Limit Reboot Schedule Wireless Schedule Wireless Statistics based on SSID/AP/Client Wireless Security Captive Portal Authentication Access Control Wireless Mac Address Filtering Wireless Isolation Between Clients SSID to VLAN Mapping Rogue AP Detection 802.1X Support 64/128/152-bit WEP / WPA / WPA2-Enterprise,WPA-PSK / WPA2-PSK Transmission Power CE: FCC: MANAGEMENT Auranet Controller Software Yes Cluster Mode Yes EAP Controller Software Email Alerts Yes LED ON/OFF Control Yes Management MAC Access Control Yes SNMP v1,v2c System Logging Local/Remote Syslog Local/Remote Syslog Telnet Yes Web-based Management HTTP/HTTPS Management VLAN Yes OTHERS Certification CE, FCC, RoHS System Requirements Microsoft Windows 10/8/7/Vista/XP Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing   An Affordable, Scalable Business Wi-Fi Solution 300Mbps Wireless N Ceiling Mount Access Point Build and manage a scalable Wi-Fi network for your business with the Auranet business class solution, tailored to handle the power of hundreds of TP-LINK EAPs at an affordable cost.   Trouble-Free Centralized Management. No Technicians Needed. Auranet enables you to set up a centralized network management system without the need of any IT or setup fees.   Free Multi-Function Auranet Controller Software Concurrently manage and monitor hundreds of Auranet EAPs in a single location. Unlike most standard hardware controllers, the TP-LINK EAP Controller Software doesn’t require any special training or added costs.   Easy-to-use Cluster Mode The user-friendly Cluster Mode allows you to manage up to 24 Auranet EAPs in your business network without requiring any extra hardware or software. Organize your network administration system by controlling multiple access points at a time with the same simplicity of a single home network router.   Custom Guest Authentication The captive portal provides customizable guest authentication settings for maximized user control. Administrators can easily set and adjust guest Wi-Fi settings by designing a unique authentication page, establishing a voucher system to limit the duration of use for each client, or creating "Operator" accounts, for permission to manage the guest network without having access to other EAP administrative features.   Easy Mount Design and PoE Timesaving and Flexible Deployment The Auranet EAP115 is designed for easy installation on any wall or ceiling. The Power over Ethernet (PoE) function allows your network cables to carry electrical power so you minimize on cable clutter. It’s one more hardwiring hassle you don’t have to worry about when operating your centralized management system.   Unified Wi-Fi for Multi-user Environment The Auranet business Wi-Fi solution is engineered to handle heavy multi-user usage in large areas without encountering the same stability issues found with standard routers and access points purposed for home use. It’s the perfect fit for motels, salons, chain-stores, schools, and restaurants.

Description: Details iShopping.pk brings you the best price for TP-Link 2.4GHz 300Mbps 9dBi Outdoor CPE (CPE210) with express shipping all over Pakistan.   Features: • Built-in 9dBi 2x2 dual-polarized directional MIMO antenna •  Adjustable transmission power from 0 to 27dBm/500mw •  System-level optimizations for more than 5km long range wireless transmission •  TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications •  Centralized Management System – Pharos Control •  AP / Client / Bridge / Repeater / AP Router / AP Client Router (WISP) operation modes •  Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely • Outdoor stabilized enclosure with IPX5 waterproof certification • Dual Ethernet ports and grounding terminal integrated • 6KV Lightning Protection, 15KV ESD Protection • Provides WEP, WPA/WPA2, WPA-PSK/WPA2-PSK data security • Selectable bandwidth of 5/10/20/40MHz • Provides Throughput Monitor, Spectrum Analyzer, Speed Test and Ping tools • Easy antenna alignment with wireless signal quality indicators via Web interface   Specification: HARDWARE Processor Qualcomm Atheros 560MHz CPU, MIPS 74Kc Memory 64MB DDR2 RAM, 8MB Flash Interface 1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in) 1 10/100Mbps Shielded Ethernet Port (LAN1, Passive PoE Passthrough) 1 Grounding Terminal 1 Reset Button Power Supply Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins) Voltage range: 16-27VDC Power Consumption 10.5 Watts Max Note: When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable. Dimensions (W x D x H) 224 x 79 x 60 mm Antenna Type Built-in 9dBi 2x2 Dual-polarized Directional Antenna Beam Width: 65° (H-Plane) / 35° (E-Plane) Note: For more details, please refer to datasheet Protection 15KV ESD Protection 6KV Lightning Protection Enclosure Outdoor ASA stabilized plastic material IPX5 waterproof Certification WIRELESS  Wireless Standards IEEE 802.11b/g/n (with Pharos MAXtream disabled) Proprietary Protocol TDMA Mode (with Pharos MAXtream enabled) Wireless Speeds Up to 300Mbps (40MHz,Dynamic) Up to 144.4Mbps (20MHz,Dynamic) Up to 72.2Mbps (10MHz,Dynamic) Up to 36.1Mbps (5MHz,Dynamic) Frequency 2.4~2.483GHz Note: Available operating frequency may vary depending on the limitations of the countries or regions in which the device is used. Transmission Power 27dBm/500mw (Adjustable power by 1dBm) Note: Maximum transmission power may vary across different channels depending on the limitations of the countries or regions in which the device is used. SOFTWARE Wireless Configurations Pharos MAXtream TDMA Technology 802.11b/g/n Modes Selectable Channel Width: 5/10/20/40MHz Automatic Channel Selection Transmission Power Control Dynamic Frequency Selection (DFS) WDS Enable/Disable Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption SSID Broadcast Enable/Disable Multi-SSID with VLAN Tagging (AP mode only) Distance/ACK Timeout Setting Wireless MAC Address Filter Wireless Advanced: > Beacon Interval/RTS Threshold/Fragmentation >Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia Management Discovery and Remote Management via Pharos Control application HTTP/HTTPS Web-based management System Log SNMP Agent(v2c) Ping Watch Dog Dynamic DDNS SSH Server System Tools Wireless Signal Quality Indicators: Signal Strength/Noise/Transmit CCQ/CPU/Memory Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP Spectrum Analyzer Speed Test Ping Traceroute System-level Optimizations Optimized IGMP Snooping/Proxy for multicast applications Hardware watch dog POE ADAPTER Dimensions(W x D x H) 110*57*33.5mm Input Current 0.8A Max @ 100VAC Input Voltage 100VA~240VAC @ 50Hz~60Hz Output 24VDC, 1.0A Max +4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet) Efficiency >80% Output Voltage 24VDC(+4,5pins; -7,8pins) Input 100-240VAC, 50/60Hz Power Status LEDs 0~0.8A: Green 0.8A~1.0A: Red Certifications CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark Interfaces 1 AC Jack with Earth Ground 1 10/100/1000Mbps Shielded Ethernet Port (Power + Data) 1 10/100/1000Mbps Shielded Ethernet Port (Data) Button Remote Reset Button OTHERS Certification CE, FCC, RoHS, IPX5 System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux. Note: We recommend you to use one of following Web browsers for an improved user experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended. Environment Operating Temperature: -30°C~70°C (-22℉~158℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~95% non-condensing   TP-LINK’s 2.4GHz 300Mbps 9dBi Outdoor CPE, the CPE210 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications.  Professional performance, coupled with user-friendly design, makes CPE210 an ideal choice for both business and home users.     Enterprise Hardware With Qualcomm Atheros enterprise level chipsets, high gain antennas and high quality material, specially designed enclosure, and PoE power supply, CPE210 is specially designed for outdoor use and can operate flawlessly in almost any climate, with operating temperatures ranging from -40℃ (-40℉) to +70 ℃ (158℉).   Advanced Antenna System Built-in High Gain Dual-Polarized Antenna  Dedicated metal reflector ensures higher gain  and lower noise interference   5km+ Wireless Data Transmission Specially designed for outdoor uses, ideal for long distance wireless data transmis sion over 5km+, tested in the field.     TP-LINK MAXtream TDMA Technology As network scale increases, wireless competition and collisions among CPEs and base stations will be so enormous that the real throughput of the network will drop, resulting in a serious impact on end-user experience. To mitigate these effects, the CPE210 uses MAXtream TDMA Technology.   Pharos Control – Centralized Management System CPE210 also comes equipped with centralized management software that helps users easily manage all the devices in their network from a single PC - Pharos Control. Functions like device discovery, status monitoring, firmware upgrading, and network maintenance can be managed using Pharos Control.   PharOS User-friendly web-based management system allows professionals to do more specific configurations.

Description: Details iShopping.pk brings you the best price for TP-Link 5GHz 300Mbps 13dBi Outdoor Access Point (CPE510) with express shipping all over Pakistan.   PharOS User-friendly web-based management system allows professionals to do more specific configurations.   5GHz 300Mbps 13dBi Outdoor CPE  CPE510 • Built-in 13dBi Dual-polarized • Directional Antenna • AP / Client / Repeater / AP Router / AP Client Router (WISP) operation modes • 6KV Lightning Protection • Weather Proof Enclosure • 15KV ESD Protection • Passive PoE Adapter   Specification: HARDWARE FEATURES Processor Qualcomm Atheros Enterprise 560MHz CPU, MIPS 74Kc Memory 64MB DDR2 RAM, 8MB Flash Interface 1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in) 1 10/100Mbps Shielded Ethernet Port (LAN1, Passive PoE Passthrough) 1 Grounding Terminal 1 Reset Button Power Supply Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins) Voltage range: 16-27VDC Power Consumption 10.5 Watts Max Note: When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable. Dimensions (W x D x H) 224 x 79 x 60 mm Antenna Type Built-in 13dBi 2x2 Dual-polarized Directional Antenna Beam Width: 45° (H-Plane) / 30° (E-Plane) Protection 15KV ESD Protection 6KV Lightning Protection Enclosure Outdoor ASA stabilized plastic material IPX5 waterproof Certification WIRELESS FEATURES Wireless Standards IEEE 802.11a/n (with Pharos MAXtream disabled) Proprietary Protocol TDMA Mode (with Pharos MAXtream enabled) Wireless Speeds Up to 300Mbps (40MHz,Dynamic) Up to 144.4Mbps (20MHz,Dynamic) Up to 72.2Mbps (10MHz,Dynamic) Up to 36.1Mbps (5MHz,Dynamic) Frequency 5.15~5.85GHz Note: Available operating frequency may vary depending on the limitations of the countries or regions in which the device is used. Transmission Power 23dBm/200mw (Adjustable power by 1dBm) Note: Maximum transmission power may vary across different channels depending on the limitations of the countries or regions in which the device is used. SOFTWARE FEATURES Wireless Configurations Pharos MAXtream TDMA Technology 802.11a/n Modes Selectable Channel Width: 5/10/20/40MHz Automatic Channel Selection Transmission Power Control Dynamic Frequency Selection (DFS) WDS Enable/Disable Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption SSID Broadcast Enable/Disable Multi-SSID with VLAN Tagging (AP mode only) Distance/ACK Timeout Setting Wireless MAC Address Filter Wireless Advanced: > Beacon Interval/RTS Threshold/Fragmentation >Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia Management Discovery and Remote Management via Pharos Control application HTTP/HTTPS Web-based management System Log SNMP Agent(v2c) Ping Watch Dog Dynamic DDNS SSH Server System Tools Wireless Signal Quality Indicators: Signal Strength/Noise/Transmit CCQ/CPU/Memory Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP Spectrum Analyzer Speed Test Ping Traceroute System-level Optimizations Optimized IGMP Snooping/Proxy for multicast applications Hardware watch dog POE ADAPTER FEATURES Dimensions(W x D x H) 110*57*33.5mm Input Current 0.8A Max @ 100VAC Input Voltage 100VA~240VAC @ 50Hz~60Hz Output 24VDC, 1.0A Max +4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet) Efficiency >80% Output Voltage 24VDC(+4,5pins; -7,8pins) Input 100-240VAC, 50/60Hz Power Status LEDs 0~0.8A: Green 0.8A~1.0A: Red Certifications CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark Interfaces 1 AC Jack with Earth Ground 1 10/100/1000Mbps Shielded Ethernet Port (Power + Data) 1 10/100/1000Mbps Shielded Ethernet Port (Data) Button Remote Reset Button OTHERS Certification CE, FCC, RoHS, IPX5 System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux. Note: We recommend you to use one of following Web browsers for an improved user experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended. Environment Operating Temperature: -30°C~70°C (-22℉~158℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~95% non-condensing   Features: • Built-in 13dBi 2x2 dual-polarized directional MIMO antenna • Adjustable transmission power from 0 to 23dBm/200mw • System-level optimization for more than 15km long range wireless transmission • TP-LINK Pharos MAXtream TDMA(Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency, ideal for PTMP applications • Centralized Management System – Pharos Control • AP / Client / Bridge / Repeater / AP Router / AP Client Router (WISP) operation modes • Outdoor stabilized enclosure with IPX5 waterproof certification • Dual Ethernet ports and grounding terminal integrated • 6KV Lightning Protection, 15KV ESD Protection • Passive PoE Adapter supports up to 60 meters (200 feet) power over Ethernet deployment and allows for device reset remotely • Provides WEP, WPA/WPA2, WPA-PSK/WPA2-PSK data security • Selectable bandwidth of 5/10/20/40MHz • Provides Throughput Monitor, Spectrum Analyzer, Speed Test and Ping tools • Easy antenna alignment with wireless signal quality indicators via Web interface   TP-LINK’s 5GHz 300Mbps 13dBi Outdoor CPE, the CPE510 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications.  Professional performance, coupled with user-friendly design, makes CPE510 an ideal choice for both business and home users.   Enterprise Hardware With Qualcomm Atheros enterprise level chipsets, high gain antennas and high quality material, specially designed enclosure, and PoE power supply, CPE510 is specially designed for outdoor use and can operate flawlessly in almost any climate, with operating temperatures ranging from -30℃ (-22℉) to +70 ℃ (158℉).   Advanced Antenna System Built-in High Gain Dual-Polarized Antenna Dedicated metal reflector ensures higher gain and lower noise interference   15km+ Wireless Data Transmission Specially designed for outdoor uses, ideal for long distance wireless data transmission, covering a range of 15km+, tested in the field.   TP-LINK MAXtream TDMA Technology As network scale increases, wireless competition and collisions among CPEs and base stations will be so enormous that the real throughput of the network will drop, resulting in a serious impact on end-user experience. To mitigate these effects, the CPE510 uses MAXtream TDMA Technology.   Pharos Control – Centralized Management System CPE510 also comes equipped with centralized management software that helps users easily manage all the devices in their network from a single PC - Pharos Control. Functions like device discovery, status monitoring, firmware upgrading, and network maintenance can be managed using Pharos Control.

Description: Details iShopping.pk brings you the best price for TP-Link AC1750 Wireless Dual Band Gigabit Ceiling Mount Access Point (EAP245) with express shipping all over Pakistan.   Features: • Simultaneous 450 Mbps on 2.4 GHz and 1300 Mbps on 5GHz totals 1750 Mbps Wi-Fi speeds • Free EAP Controller Software lets administrators easily manage hundreds of EAPs • Supports Power over Ethernet (802.3at) for convenient and affordable installation • Captive portal provides a convenient method for guest authentication • Band Steering automatically moves dual-band devices onto the wider 5 GHz band for faster connections • Load balancing ensures large numbers of users have smooth network experiences in high-density business networks • Supports management VLAN for an enhanced network management • 1750Mbps wireless data rate for uninterrupted wireless connection • Free Controller Software for easy centralized management of hundreds of EAPs • Power over Ethernet(802.3at) Support for convenient and affordable installation • Captive portal provides one convenient method of authentication for Wi-Fi guests • Simple mounting design makes easy to install on any wall or ceiling surface • Rate limit on per SSID to restrict the bandwidth of each client • Load balance ensures large numbers of users have smooth network experiences in high density business networks • Band Steering Automatically moves dual band devices onto the wider 5GHz band for faster connections • Access Control restricts or only allows the client to access the specified network segment • Reboot Schedule enables all the APs to reboot automatically at a specified time • WPA/WPA2-enterprise, 802.1X with RADIUS secure authentication and rogue access point detection ensure the security of WLAN • Multi-SSID divides multiple wireless network for different users • Compatible with 802.11 a/b/g/n/ac products • Multiple operating modes including managed AP and standalone AP satisfy different application conditions • Qos function gives video and voice streams higher priority to promote smoother performance for video and voice services   Specification: HARDWARE Interface Gigabit Ethernet (RJ-45) Port *1（Support IEEE802.3at PoE） Button Reset Power Supply PoE or External 12VDC / 1.5A Power Supply Power Consumption 12.7 W Dimensions (W x D x H) 7.1 x 7.1 x 1.9in. (180*180*47.5mm) Antenna Type Internal Omni 2.4GHz: 3* 4dBi 5GHz: 3*4dBi Mounting Ceiling /Wall Mounting (Kits included) Physical Security Lock Kensington Lock Slot Watch Dog Yes WIRELESS Wireless Standards IEEE 802.11ac/n/g/b/a Frequency 2.4GHz and 5GHz Signal Rate 5GHz:Up to 1300Mbps 2.4GHz:Up to 450Mbps Wireless Functions Multiple SSIDs（Up to 16 SSIDs, 8 for each band） Enable/Disable Wireless Radio Automatic Channel Assignment Transmit Power Control （Adjust Transmit Power on dBm） QoS(WMM) Band Steering Load Balance Rate Limit Reboot Schedule Wireless Schedule Wireless Statistics based on SSID/AP/Client Wireless Security Captive Portal Authentication Access Control Wireless Mac Address Filtering Wireless Isolation Between Clients SSID to VLAN Mapping Rogue AP Detection 802.1X Support 64/128/152-bit WEP / WPA / WPA2-Enterprise, WPA-PSK / WPA2-PSK Transmission Power CE： FCC: MANAGEMENT EAP Controller Software Yes Email Alerts Yes LED ON/OFF Control Yes Management MAC Access Control Yes SNMP Yes System Logging Local/Remote Syslog Local/Remote Syslog Telnet Yes Web-based Management HTTP/HTTPS L3 Management Yes Multi-site Management Yes Management VLAN Yes OTHERS Certification CE, FCC, RoHS System Requirements Microsoft Windows XP, Vista, Windows 7, Windows 8, Windows10 Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing   Superior Wi-Fi Speeds with 3x3 11ac MIMO technology The latest generation of 802.11ac Wi-Fi, combined with advanced 3x3 MIMO technology, ensures superior Wi-Fispeeds and coverage over 2.4 GHz and 5 GHz wireless bands.The EAP245 reaches Wi-Fi speeds of up to 1.75 Gbps, with 1300 Mbps on the 5 GHz band and 450 Mbps on the 2.4 GHz band.   Easy for Centralized Management Manage and monitor hundreds of EAPs with ease, all from a single location, using the TP-Link Auranet Controller software's intuitive management interface. Control and map out your entire network from any connected PC. There’s no added cost, and no need for special training. Business Wi-Fi management has never been so efficient and cost-effective.   Captive PortalEfficient Guest Authentication Captive portal technology provides a convenient method of authentication for Wi-Fi guests by requiring users to perform certain actions before network access is allowed. It can control connections to your network with a voucher system and customized authentication page, which can also provide a branded experience, advertise to customers and offer coupons   Easy Mount Design and PoEFlexible Deployment The EAP's low-profile design and easy-mount chassis make it easy to install on any wall or ceiling surface and allow it to blend in with most styles of interior decor. EAP devices also support Power over Ethernet (PoE), making deployment effortless and flexible.   Unified  Wi-Fi  for a  Multi-User  Business Environment The Auranet business-grade 11ac Wi-Fi solution is engineered to handle heavy multi-user usage in large areas without encountering the same stability issues found with standard routers and access points designed for home use.

Description: Details TP-Link  Wireless Gigabit  Access Point Delivered All over Pakistan iShopping.pk brings you the best price for TP-Link AC1200 Wireless Gigabit Indoor/Outdoor Access Point (EAP225-Outdoor) with express shipping all over Pakistan.   Details: Intelligent Self-organization Omada EAPs with Mesh Technology, automatically choose the best route to extend your Wi-Fi further and more flexibly. Self-healing If one link has an issue, the system will automatically reroute data via the other Omada devices to make sure you stay online. Superior Wi-Fi Performance and Long-Range Coverage Dedicated high-power amplifier and professional antennas along with the latest generation 802.11ac Wave 2 MU-MIMO2 technology, ensure superior Wi-Fi performance and long-range coverage over 2.4GHz and 5GHz wireless bands. Seamless Roaming 802.11k and 802.11v help client select access point automatically with the best signal to facilitate seamless transitions when move. This allows streaming communication like VoIP and video conferences uninterrupted.2 Specially Designed Weatherproof Enclosure for Outdoor Environment Rated as IP65 during Ingress Protection testing, a resilient weatherproof enclosure protects the access points against harsh outdoor condition. Excellent Hardware Designs With special design of its antenna, appearance, power options and installation methods, EAP225-Outdoor can perfectly fit for different scenarios both indoors and outdoors. Detachable Antennas EAP225-Outdoor is designed with 2 Omni-directional detachable antennas, which means other antennas can also be attached for your specific demands. Free Cloud Centralized Management - Anytime, Anywhere Omada cloud controller software is the built-in OC200 for easy deployment and can be installed on Windows or Linux computer for large wireless networks. Free cloud service connects everything together so you can monitor and control your system from anywhere at any time. Easy Management with the Omada App Follow configuration instructions on the free Omada app to get set up in minutes. Omada lets you configure settings, monitor the network status and manage clients, all from the convenience of a smartphone or tablet.   Specification: HARDWARE FEATURES Interface One gigabit Ethernet RJ-45 port (Support 802.3af PoE and Passive PoE) Button Reset Power Supply 802.3af PoE and 24 Passive PoE(PoE injector included) Power Consumption 10.5W Dimensions (W x D x H) 8.5 × 1.8 × 1.1in. (215 × 46 × 27 mm) Antenna 2.4GHz: 2 × 3dBi 5GHz: 2 × 4dBi Weatherproof Enclosure IP65 Mounting Pole/Wall mount (mounting kit included) WIRELESS FEATURES Wireless Standards IEEE 802.11a/b/g/n/ac Frequency 2.4GHz, 5GHz Signal Rate 802.11ac: 5G:6.5 Mbps to 867Mbps(MCS0-MCS9,NSS = 1 to 2 VHT20/40/80) 2.4G:78Mbps to 300Mbps (MCS8-MCS9 VHT20/40, NSS=1 to 3) 802.11n: 6.5 Mbps to 300 Mbps (MCS0-MCS15, VHT 20/40) 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps 802.11b: 1, 5.5, 11Mbps 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps Wireless Functions Multiple SSIDs（Up to 16 SSIDs, 8 for each band） Enable/Disable Wireless Radio Automatic Channel Assignment Transmit Power Control （Adjust Transmit Power on dBm） QoS(WMM) MU-MIMO Airtime Fairness Beamforming Band Steering Load Balance Rate Limit Reboot Schedule Wireless Schedule Wireless Statistics based on SSID/AP/Client Wireless Security Captive Portal Authentication Access Control Wireless Mac Address Filtering Wireless Isolation Between Clients SSID to VLAN Mapping Rogue AP Detection 802.1X Support Transmission Power 23dBm, max. (2.4GHz) 22dBm, max. (5GHz) MANAGEMENT Omada App Yes Omada Cloud Controller Yes Omada Controller Software Yes Cloud Access Yes Email Alerts Yes Management MAC Access Control Yes System Logging Local/Remote Syslog Yes SSH Yes Web-based Management Yes L3 Management Yes Multi-site Management Yes Management VLAN Yes OTHERS Certification FCC RoHS Package Contents AC1200 Wireless MU-MIMO Gigabit Indoor/Outdoor Access Point Passive PoE Injector Power Cord Mounting Kits Installation Guide Waterproof Ruber Insert Waterproof Antenna Environment Operating Temperature: -30℃~70℃ (-22℉~158℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing 

Description: Details iShopping.pk brings you the best price for Tenda O6 Wireless 5GHz 11AC N433 Outdoor Point To Point CPE with express shipping all over Pakistan.   O3 2.4GHz Outdoor CPE is designed to WISP CPE solutions and long distance wireless network solutions for video surveillance and data transmission. It features with 12dBi directional antenna to provide an efficient way to pick up and maintain a stable signal for a wireless network. Adopt of auto-bridging technology,two CPE can connect to each other automatically to make it easy to setup. What it does O3 2.4GHz Outdoor CPE is designed to WISP CPE solutions and long distance wireless network solutions for video surveillance and data transmission. It features with 12dBi directional antenna to provide an efficient way to pick up and maintain a stable signal for a wireless network. Adopt of auto-bridging technology,two CPE can connect to each other automatically to make it easy to setup. 5km+ transmission Range O3 adopts of independent power amplifier and 12dBi directional antenna to provide an efficient way to pick up and maintain a stable signal for a wireless network up to 5km. Auto-bridge For Two Device O3 adopts of auto-bridge technology,two cpe can connect to each other when you power on them face to face. It is very easy to setup for CCTV surveillance and data. Smart Signal Indicator LED 3 signal LED Lights represent the currently signal strength that O3 receives from peer device.It is helpful to find the right location to deploy the device and achieve a better performance. Professional Outdoor Design Equipped with IP64 waterproof enclouse and high quality hardware design, O3 can work in various weather conditions, such as sunshine, rainfall or extremely low/high temperature environment Multiple Application Scenarios Long-Distance Wireless Connection One work as AP mode and another work as Station mode to create a long distance wrieless connecton for video surveillance and data transmission. WISP(Client+Router) Mode Wirelessly connect to WISP station/hotspot to share Internet to local wireless and wired network. P2MP Link Link multi AP in a network, all the associated client can communicate with each other. Easy to Setup and Manage O3 comes with a centralized management software that helps users easily to manage all the devices in the network from a single PC-CPE Assistant.   Specifications: Mode                                                                                                 O3 Dimension 270*94.86*67.5mm Deployment Pole Mount Application Scenarios WISP CPE, Data transmission and Long range video surveillance Frequency 2.4GHz Maximum wireless speed 150Mbps Interface 2*10/100Mbps Ethernet Port Antenna 12dbi Antenna Beamwidth Horizontal: 60° Elevation: 30° Reset Button 1 GND Terminal 1 Power Consumption 4.3W Waterproof Level IP64 LED indicator PoE/LAN,LED1,LED2,LED3 Power Method 12V1A Passive PoE Lightning Protection 6000V Passive PoE power supply Passive power over ethenet via PoE/LAN (4,5pins -7,8pins) Voltage range: 11-13.8V DC Reception Sensitivity MCS0: -96dbm MCS7: -72dbm Operating mode AP/Station/WISP/P2MP/WDS Repeater/Router Standard&Protocol IEEE 802.11b/g/n Enable/Disable Wireless Radio Support SSID Hidden Support Wireless Client isolation Support SSID Isolation Support Client Limitation For SSID Support Wireless Access Control Support Weak Signal Client Limitation Support Transmit Power Adjustable power by 1dBm WMM Capable Support APSD Capable Support Wireless Security 64/128 WEP,WPA-PSK,WPA2-PSK,WPA&WPA2-PSK,WPA,WPA2 Transmission Media Support VLAN Tagging for SSID Support DHCP Server Support VPN Pass-through PPTP,L2TP Remote Web access Support Schedule Reboot Support Page Timeout Support Ping Watchdog Support Dyndns noip, dyndns.org Network Diagnoses Ping, Traceroute, Signal Scan Time&Date Setting Support Firmware Upgrade Support Backup/Restore Configuration Support Username Managerment Support Syslog Support Managed By Controller PC Software -- CPE Assistant Package Content 1*5km Point to Point Outdoor CPE 1*Power Adapter 1*PoE Injector 2*Plastic Staps 1*Quick Installation Guide Temperature Operating Temperature:-30℃ ~ 60℃ Storage Temperature:-40℃ ~ 70℃ Humidity Operating Humidity:10%~90% non-condensing Storage Humidity:10%~90% non-condensing Default Settings Default login IP:192.168.2.1 Default Login Username:admin Default Login Password:admin Certification FCC/CE/RoHS

Description: Details iShopping.pk brings you the best price for TP-Link 2.4GHz 300Mbps 12dBi Outdoor CPE (CPE220) with express shipping all over Pakistan.   Features: • Built-in 12dBi 2x2 dual-polarized directional MIMO antenna •  Adjustable transmission power from 0 to 30dBm/1000mw •  System-level optimizations for more than 13km long range wireless transmission •  TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications •  Centralized Management System – Pharos Control •  AP / Client / Bridge / Repeater / AP Router / AP Client Router (WISP) operation modes •  Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely   Specification: HARDWARE Processor Qualcomm Atheros 560MHz CPU, MIPS 74Kc Memory 64MB DDR2 RAM, 8MB Flash Interface 1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in) 1 10/100Mbps Shielded Ethernet Port (LAN1, Passive PoE Passthrough) 1 Grounding Terminal 1 Reset Button Power Supply Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins) Voltage range: 16-27VDC Power Consumption 10.8 Watts Max Note: When deployed using Passive PoE, the power drawn from the power source will  be higher by some amount depending on the length of the connecting cable. Dimensions (W x D x H) 11×3.1×2.1 inch (276×79×60 mm) Antenna Type Built-in 12dBi 2x2 Dual-polarized Directional Antenna Beam Width: 60° (H-Plane) / 30° (E-Plane) Note: For more details, please refer to datasheet Protection 15KV ESD Protection 6KV Lightning Protection Enclosure Outdoor ASA stabilized plastic material IPX5 waterproof Certification WIRELESS Wireless Standards IEEE 802.11b/g/n (with Pharos MAXtream disabled) Proprietary Protocol TDMA Mode (with Pharos MAXtream enabled) Wireless Speeds Up to 300Mbps (40MHz,Dynamic) Up to 144.4Mbps (20MHz,Dynamic) Up to 72.2Mbps (10MHz,Dynamic) Up to 36.1Mbps (5MHz,Dynamic) Frequency 2.4~2.483GHz Note: Available operating frequency may vary depending on the limitations  of the countries or regions in which the device is used. Transmission Power 30dBm/1000mw (Adjustable power by 1dBm) Note: Maximum transmission power may vary across different channels depending  on the limitations of the countries or regions in which the device is used. SOFTWARE Wireless Configurations Pharos MAXtream TDMA Technology 802.11b/g/n Modes Selectable Channel Width: 5/10/20/40MHz Automatic Channel Selection Transmission Power Control Dynamic Frequency Selection (DFS) WDS Enable/Disable Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption SSID Broadcast Enable/Disable Multi-SSID with VLAN Tagging (AP mode only) Distance/ACK Timeout Setting Wireless MAC Address Filter Wireless Advanced: > Beacon Interval/RTS Threshold/Fragmentation >Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia Management Discovery and Remote Management via Pharos Control application HTTP/HTTPS Web-based management System Log SNMP Agent(v2c) Ping Watch Dog Dynamic DDNS SSH Server System Tools                                     Wireless Signal Quality Indicators: Signal Strength/Noise/Transmit CCQ/CPU/Memory Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP Spectrum Analyzer Speed Test Ping Traceroute System-level Optimizations Optimized IGMP Snooping/Proxy for multicast applications Hardware watch dog POE ADAPTER Dimensions(W x D x H) 110×57×33.5mm Input Current 0.8A Max @ 100VAC Input Voltage 100VA~240VAC @ 50Hz~60Hz Output 24VDC, 1.0A Max +4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet) Efficiency >80% Output Voltage 24VDC(+4,5pins; -7,8pins) Input 100-240VAC, 50/60Hz Power Status LEDs 0~0.8A: Green 0.8A~1.0A: Red Certifications CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark Interfaces 1 AC Jack with Earth Ground 1 10/100Mbps/1000Mbps Shielded Ethernet Port (Power + Data) 1 10/100Mbps/1000Mbps Shielded Ethernet Port (Data) Button Remote Reset Button OTHERS Certification CE, FCC, RoHS, IPX5 System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7,  MAC OS, NetWare, UNIX or Linux. Note: We recommend you to use one of following Web browsers for an improved user  experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended. Environment Operating Temperature: -40°C~70°C (-40℉~158℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~95% non-condensing   TP-LINK’s 2.4GHz 300Mbps 12dBi Outdoor CPE, the CPE220 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications.  Professional performance, coupled with user-friendly design, makes CPE220 an ideal choice for both business and home users. Enterprise Hardware With Qualcomm Atheros enterprise level chipsets, high gain ante nnas and high quality material, specially designed enclosure, and P oE power supply, CPE220 is specially designed for outdoor use and can operate flawlessly in almost any climate, with operating temperatures ranging from -40℃ (-40℉) to +70 ℃ (158℉).     Advanced Antenna System Built-in High Gain Dual-Polarized Antenna  Dedicated metal reflector ensures higher gain  and lower noise interference   13km+ Wireless Data Transmission Specially designed for outdoor uses, ideal for long distance wireless data transmission over 13km+, tested in the field.     TP-LINK MAXtream TDMA Technology As network scale increases, wireless competition and collisions among CPEs and base stations will be so enormous that the real throughput of the network will drop, resulting in a serious impact on end-user experience. To mitigate these effects, the CPE220 uses MAXtream TDMA Technology.   Pharos Control – Centralized Management System CPE220 also comes equipped with centralized management software that helps users easily manage all the devices in their network from a single PC - Pharos Control. Functions like device discovery, status monitoring, firmware upgrading, and network maintenance can be managed using Pharos Control.   PharOS User-friendly web-based management system allows professionals to do more specific configurations.

Description: Details iShopping.pk brings you the best price for Tenda O6 Wireless 5GHz 11AC N433 Outdoor Point To Point CPE with express shipping all over Pakistan.   O6 5GHz 433Mbps outdoor Point to Point CPE is designed to WISP CPE solutions and long distance wireless network solutions for video surveillance and data transmission. It features with an external power amplifier and a built-in 16dBi directional antenna to provide an efficient way to pick up and maintains a stable signal for a wireless network connection range up to 10 kilometers. 5GHz 11AC 433Mbps O6 adopts of 11AC technology and gigabit ethernet port to boost the throughput performance on the wireless connection. 10km+ Wireless Data Transmission O6 is specially designed for outdoor long range point to point application scenarios. Adopt of external power amplifier and 16dBi antenna to achieve 10km+ wireless data transmission range. Bridge two device at a push of button O6 comes with an operating mode switch, you can switch the device to work as AP mode or Station mode without login to web UI. When one works as AP mode and another works as Station(Client) mode, you can bridge two devices together at a push of Bridge/RST button. Smart Signal Indicator LED 3 signal LED Lights represent the currently signal strength that O6 receives from peer device.It is helpful to find the right location to deploy the device and achieve a better performance. Advanced Antenna System O6 adopts of specific antenna array and metal reflector to deliver higher gain and optimized transmission quality. Professional Outdoor Design Equipped with IP64 waterproof enclouse and 6kv lightning protection capability, O6 can work in various weather conditions, such as sunshine, rainfall, wind, snow or extremely low/high temperature environment Multiple Application Scenarios Long-Distance Wireless Connection One work as AP mode and another work as Station mode to create a long distance wrieless connecton for video surveillance and data transmission. WISP(Client+Router) Mode Wirelessly connect to WISP station/hotspot to share Internet to local wireless and wired network. Easy to Manage O6 also comes with a centralized management software that helps users easily manage all the devices in their network from a single computer-- CPE Assistant. Specifications:   Dimension                                                                                          270*94.86*67.5mm                                                                              Frequency Range 5GHz Maximum wireless speed 433Mbps CPU Processor Broadcom 800MHz GND Terminal 1 Interface 1*GE PoE/WAN/LAN port Mode Switch Station: The device only work in Station mode Off: The device work on AP/Station/Universal Repeater/WISP/Router mode AP: The device only work in AP mode Button Reset: Press 10 seconds or more to restore to default settings Bridge: Press 3 seconds and release it to bridge uplink AP Antenna 16dbi Directional Antenna Antenna Beamwidth Horizontal: 30° Vertical: 15° Maximum Consumption 9W Lightning Protection 6KV Waterproof Level IP64 LED LAN,LED1,LED2,LED3 Power Supply 24v 0.5A PoE Injector Operating mode AP/Station/Universal Repeater/WISP/Router Standard&Protocol IEEE 802.11ac/n/a Wireless Speed Enable/Disable Wireless Radio SSID Hidden Wireless Client isolation Sensitivity Threshold WMM Capable APSD Capable Wireless Access Control Wireless Client list Wireless Security 64/128 WEP,WPA-PSK,WPA2-PSK,WPA&WPA2-PSK,WPA,WPA2 Transmit Power Adjustable power by 1dBm Reception Sensitivity MCS0: -90dbm MCS7: -72dbm DHCP Server DHCP Server Clients list VPN Pass-through PPTP,L2TP Ping Watchdog Support Speed Test Support Remote Web access Support Schedule Reboot Support Page Timeout Support Dyndns noip, dyndns.org Network Diagnoses Ping, Traceroute, Signal Scan Management Tool Time&Date Setting System Log Firmware update Backup/Restore Configuration Username Managerment Temperature Operating Temperature:-20℃ ~ 55℃ Storage Temperature:-40℃ ~ 70℃ Humidity Operating Humidity:10%~90% non-condensing Storage Humidity:10%~90% non-condensing Default Settings IP Address: 192.168.2.1 Login Username:admin Login Password:admin Certification FCC/CE/RoHS

UGreen USB-C To USB-C 100W Power Price in Pakistan UGREEN USB C to USB C Cable with 100W & 10GBPS Data Transfer Support Braided USB 31. Gen 2 Cable now offers the best in class performance with ease of mind. Max 100W Power Delivery: Fast charging your USB-C laptops or smartphones at Max 20V 5A current, suports 100W 87W 61W 45W 30W 18W Power Delivery PD rapid charging. 10Gbps Super Speed Data Transfer: UGREEN USB-c charging cable complies with USB 3.1 Gen 2 standard and provide hi-speed syncing at max 10 Gbps, transferring HD movie or large files in just seconds. 4K Video Output: Compatible with Thunderbolt 3, this USB-C to USB-C cable allows you to connect MacBook to a second monitor or display at 4K video output at Max 3840×2160 at 60HZ. NOTE: The video function only works for devices with USB-C ports that support DP Alt Mode. Premium Quality: Solid and durable nylon braided cable ensures longer service life up to 10,000 bend. Double-sided USB C connectors with overmolded strain relief are designed for frequent insertions. Aluminum housing, high-purity copper wire, triple-shielding will keep long-lasting fast charging performance. Broad Compatibility: UGREEN USB C to C Cable compatible with Macbook Pro 15?, Macbook Pro 13?, Macbook, Macbook Air 2020/2019/2018, iPad Pro 2020/2018, Google Pixel 2/3/3a XL, Samsung Galaxy Note 10/Note 10+/Note 9/S10/S10e/S10+/S9+/S8+, Nexus 6P 5X, PS5, Nintendo Switch, Huawei Matebook X Pro, Matebook 13, Chromebook, Dell XPS 13, Yoga 900 720, ThinkPad X1, Razer Blade Stealth 2018, ASUS ZenBook 3, HP Spectre notebook, etc. UGREEN USB-C To USB-C Cable 3.1 Gen 2 offers rapid charging and syncing between two USB Type-C enabled devices. You can use it to connect your pixel smartphone to new Macbook Pro for data transfer, or simply plug your Type-C laptop or cell phone to a wall charger adapter for power supply. Support Power Delivery Charge at Max 100W, 20V/5A. Support USB C 3.1 Gen 2 standard fast data transfer at Max 10Gbps. Support Max 3840×2160 at 60HZ 4k video output. 4K Video Transmit This cable supports up to 3840× [email protected]  4K video signal transferring for the connection between USB C laptop and display. 100W Power Delivery Ensures safe and fast PD charging for your USB-C laptop/smartphone/tablet, saving charging time with maximum 20V 5A power output. Durable and Flexible 6X durable nylon braided cable not only stay tangling-free but also flexible enough to be wrapped up and put in a bag. Widely Compatibility: Apple MacBook Pro 13? 15? 2019/2018/2017/2016, MacBook Air 13? 2020/2019/2018, MacBook 12? 2017/2016/2015, iPad Pro 11? 12.9? 2020/2018 Huawei MateBook X Pro, MateBook D, MateBook 13, MateBook E Google Chromebook Pixel, Pixel XL, Pixel 3a XL, Pixel 3, Pixel 3xl, Pixel 2, Pixel 2 XL, Nexus 5X, Nexus 6P Samsung TabPro S 12?/Galaxy Book 12?/Galaxy S20/Note 10/Note 10 Plus/S10/S9/S8/Note 9/Note8 Lenovo Yoga 920/910/900S/700/ThinkPad X1 S2 X270 X390 T490 HP Spectre notebook, Envy 13t, hp Elite X2, EliteBook Folio G1 Notebook PC Dell XPS 13, Razer Blade Stealth 2018, ASUS ZenBook 3 LG G5 G6 G7 ThinQ, LG V20 V30 V40 V50 ThinQ Microsoft Lumia 950, Lumia 950XL, HTC 10 U12+ Warm Reminder: Charging speed will depend on the device and the wall charger. We sugget charging with original power adapter to achieve best performence. Check Other Cables

DESCRIPTION Cash on Delivery available all over Pakistan. *Unlocked ZTE 802ZT 4G 988Mbps LTE Hotspot. *4G Bands 1/2/3/4/8/11/12/17/28/41/42 Sim Router Mobile WiFi. *802ZT It works as long as the band is compatible with the local operator. *The device is unlocked and the device supports English Language. *4G band:Band1/2/3/4/8/12/17/28/41/42 *The fastest down to 988Mbps *High speed communication Data communication can be used comfortably with high-speed communication with a maximum download speed of 988 Mbps. *Support 5CA (bundling carrier aggregation of 5 bands). In addition, the "4x4 MIMO" technology uses four antennas for transmission (base station) and reception (terminal) to simultaneously transmit multiple data, thereby increasing data density and increasing the amount of data that can be transmitted at one time "256QAM". *Comfortable use Simply use the smartphone's camera to load the QR code displayed on the display and you can easily connect. *With a 3,000 mAh large capacity battery, the battery lasts approximately 12 hours. * 2 QR code reader recommends the following. iPhone: "Standard Camera", Smartphone: "Dad QR" * 3 This applies when carrier aggregation is not applied. Usage time depends on network side standards, usage environment and radio wave conditions *FDD-LTE / AXGP / TDD-LTE / W-CDMA • OS: Win-dows 10 / 8.1 / 8/7 Mac OS X 10.9 to 10.14 • Frequency: AXGP (2.5 GHz, 3.5 GHz), FDD-LTE (700 MHz, 900 MHz, 1.5 GHz, 1.7 GHz, 2.1 GHz), W-CDMA (900 MHz, 2.1 GHz) AXGP (2.5GHz, 3.5 GHz)), FDD-LTE (700MHz, 900MHz, 1.7GHz, 1.7GHz / 2.1GHz, 1.9GHz, 2.1GHz), W-CDMA (900MHz, 1.7GHz / 2.1GHz, 1.9GHz,2.1GHz) • Size (W x D x H): Approximately 112 x 67.5 x 15.6mm • Weight: Approximately 153g • Number of connectable units: 16 • Battery: 3,000mAh • Communication speed: (Maximum downlink / uplink) 988Mbps / 37.5Mbps • Interface: USB Type-C • Waterproof performance: IPX2 • Dustproof performance: IP5X Mention that you found this ad on DealMarkaz.pk when you call.

Description: Details iShopping.pk brings you the best price for TP-Link AC1300 Mini Wireless Dual Band MU-MIMO USB Adapter (Archer T3U) with express shipping all over Pakistan.   Mini Size,Big performance AC1300 Mini Wireless MU-MIMO USB Adapter Archer T3U High-Speed Dual Band Adapter for Better Connections Wireless AC technology means Archer T3U delivers connections that are up to 3x faster than with the previous Wireless N standard. High-speed WiFi (up to 867 Mbps over the 5 GHz band and 400 Mbps over the 2.4 GHz band) means Archer T3U is able to support all your online activities, from HD video streaming to lag-free online gaming and web surfing. Miniature Design - Take With You On the Go Archer T3U has a smart design that is tinier than most USB adapters. Not only can it be inserted into any USB port but is also easy to carry. USB 3.0 for Superior Transfer Speeds Experience blazing-fast data transfers of up to 4.8 Gbps with USB 3.0 — the latest USB connectivity standard. USB 3.0 transfers data up to 10x faster than USB 2.0 and is also backwards compatible with USB 2.0. Combined with 802.11ac Wi-Fi, USB 3.0 makes Archer T3U ideal for HD streaming, online gaming and large file downloads. Boosted Throughput with MU-MIMO With MU-MIMO technology, Archer T3U can provide two simultaneous data streams, improving the throughput and efficiency of the entire network when working with a compatible MU-MIMO router. Easy Setup A friendly user interface comes on a CD for simple installation. Advanced Security WPA/WPA2 encryption standards ensure your wireless connections safety. Operating System Supports Windows, Mac OS   Specifications: HARDWARE FEATURES Interface USB 3.0 Dimensions (W x D x H) 1.59 × 0.78 × 0.41in. (40.5 × 19.72 × 10.29mm) Antenna Type Internal WIRELESS FEATURES Wireless Standards IEEE 802.11ac, IEEE 802.11a, IEEE 802.11n, IEEE 802.11g, IEEE 802.11b Frequency 5GHz 2.4GHz Signal Rate 5GHz 11ac: Up to 867Mbps(dynamic) 11n: Up to 300Mbps(dynamic) 11a: Up to 54Mbps(dynamic) 2.4GHz 11n: Up to 400Mbps(dynamic) 11g: Up to 54Mbps(dynamic) 11b: Up to 11Mbps(dynamic) Reception Sensitivity 5GHz： 11a 6Mbps: -91dBm 11a 54Mbps: -76dBm 11n HT20：-71dBm 11n HT40：-70dBm 11ac HT20: -68dBm 11ac HT40: -64dBm 11ac HT80: -62dBm 2.4GHz: 11b 11Mbps: -86dBm 11g 54Mbps: -73dBm 11n HT20: -71dBm 11n HT40: -70dBm Transmit Power Wireless Modes Ad-Hoc / Infrastructure Mode Wireless Security Support 64/128 bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK Modulation Technology DBPSK, DQPSK, CCK, OFDM, 16-QAM, 64-QAM, 256-QAM OTHERS Certification FCC, RoHS Package Contents AC1300 Mini Wireless MU-MIMO USB Adapter Archer T3U Quick Installation Guide Resource CD System Requirements Windows 10/8.1/8/7/XP, Mac OS X 10.9-10.14 Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing

TP-Link Archer T3U AC1300 Mini Wireless MU-MIMO USB Adapter Ultimate WiFi Speed – AC1300 (400 Mpbs on 2.4GHz band and 867 Mbps on 5GHz band) wireless speed with the next generation Wi-Fi - 802.11ac* Dual Band Wireless – 2.4GHz and 5GHz band for flexible connectivity Mini design –Mini-sized design for convenient portability with a reliable high performance Super Speed USB 3.0 Port - Up to 10x faster transfer speeds than USB 2.0*** MU-MIMO - Delivers highly efficient wireless connection** Supported Operating System – Supports Windows 10/8.1/8/7/XP, Mac OS X****  Mini Size, Big performance AC1300 Mini Wireless MU-MIMO USB Adapter Archer T3U High-Speed Dual Band Adapter for Better Connections Wireless AC technology means Archer T3U delivers connections that are up to 3x faster than with the previous Wireless N standard. High-speed WiFi (up to 867 Mbps over the 5 GHz band and 400 Mbps over the 2.4 GHz band) means Archer T3U is able to support all your online activities, from HD video streaming to lag-free online gaming and web surfing. 867 Mbps 5 GHz 400 Mbps 2.4 GHz Miniature Design - Take With You On the Go Archer T3U has a smart design that is tinier than most USB adapters. Not only can it be inserted into any USB port but is also easy to carry. USB 3.0 for Superior Transfer Speeds Experience blazing-fast data transfers of up to 4.8 Gbps with USB 3.0 — the latest USB connectivity standard. USB 3.0 transfers data up to 10x faster than USB 2.0 and is also backwards compatible with USB 2.0. Combined with 802.11ac Wi-Fi, USB 3.0 makes Archer T3U ideal for HD streaming, online gaming and large file downloads.   Boosted Throughput with MU-MIMO With MU-MIMO technology, Archer T3U can provide two simultaneous data streams, improving the throughput and efficiency of the entire network when working with a compatible MU-MIMO router. MU-MIMO Router Regular Adapter MU-MIMO Router MU-MIMO Adapter   Easy Setup A friendly user interface comes on a CD for simple installation.     Advanced Security WPA/WPA2 encryption standards ensure your wireless connections safety.     Operating System Supports Windows, Mac OS   HARDWARE FEATURES Interface USB 3.0 Dimensions (W x D x H) 1.59 × 0.78 × 0.41in. (40.5 × 19.72 × 10.29mm) Antenna Type Internal   WIRELESS FEATURES Wireless Standards IEEE 802.11ac, IEEE 802.11a, IEEE 802.11n, IEEE 802.11g, IEEE 802.11b Frequency 5GHz 2.4GHz Signal Rate 5GHz 11ac: Up to 867Mbps(dynamic) 11n: Up to 300Mbps(dynamic) 11a: Up to 54Mbps(dynamic) 2.4GHz 11n: Up to 400Mbps(dynamic) 11g: Up to 54Mbps(dynamic) 11b: Up to 11Mbps(dynamic) Reception Sensitivity 5GHz： 11a 6Mbps: -91dBm 11a 54Mbps: -76dBm 11n HT20：-71dBm 11n HT40：-70dBm 11ac HT20: -68dBm 11ac HT40: -64dBm 11ac HT80: -62dBm 2.4GHz: 11b 11Mbps: -86dBm 11g 54Mbps: -73dBm 11n HT20: -71dBm 11n HT40: -70dBm Transmit Power Wireless Modes Ad-Hoc / Infrastructure Mode Wireless Security Support 64/128 bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK Modulation Technology DBPSK, DQPSK, CCK, OFDM, 16-QAM, 64-QAM, 256-QAM   OTHERS Certification FCC, RoHS Package Contents AC1300 Mini Wireless MU-MIMO USB Adapter Archer T3U Quick Installation Guide Resource CD System Requirements Windows 10/8.1/8/7/XP, Mac OS X 10.9-10.14 Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing

Type: wireless HD video transmitter, wireless HDMI transmitter, wireless SDI transmitter, NLOS COFDM transmitter, microwave transmitter Other name: COFDM transmitter, wireless AV sender, COFDM wireless video transmitter Modulation: COFDM Special features: point to point, point to multi point, NLOS, LOS, mobile wireless transmission (non line of sight, line of sight) High definition: 1080I, 1080P 1920X1080; full HD Port: HDMI, SDI Frequency: VHF, UHF, 300MHz to 800MHz, 800MHz to 4400MHz, or 1.2GHz, 2.4GHz (customized) Distance: 3km to 5km NLOS (vehicle to building); 100km to 200km on UAV Function: transmitting audio video Work with: HD camera, UAV, COFDM receiver Encryption: AES 128 bit encrypted; AES 256 bit encrypted Details of Broadcasting wireless HD video transmitter Broadcasting wireless HD video transmitter, a new FHD HDMI SDI H.264 video transmitter, is to send FHD video Low latency high sensitive transmitter can connect to HDMI HD-SDI CCTV camera to transmit receive FHD 1080P, 1080I video high sensitive transmitter is popular among military, inspection section, police, army, fireman to install in station, building or helicopter, UAV ( unmanned aerial vehicle ) to live broadcast data (audio, video, images) Full HD 1080P high definition COFDM modulation Stable signal, 5KM -150km long range HD-SDI/HDMI and BNC input Adjustable bandwidth 4/8MHz Optional video input: HD-SDI and HDMI Balanced stereo audio input Two design Adjustable RF power Real time broadcasting Low delay Advantages: High quality image and high definition video transmission High speed mobile transmission, max speed 450kph Adjustable RF power ( 2-8W ), up to 200km transmission distance Broad-spectrum: in UAV shooting, live broadcasting COFDM modulation and stable transmission COFDM modulation AES data encryption Strong ability of anti-interference, diffraction and penetration

Description: Details iShopping.pk brings you the best price for Ubiquiti airFiber 5GHz Carrier Backhaul Radio With LTU Technology (AF-5XHD) with express shipping all over Pakistan.   Ubiquiti airfiber 5xhd Price in Pakistan Features: • Programmable Transmit Power: The radio's transmitpower level can be programmed up to +29 dBm. • Programmable Duty Cycle: (GPS synchronized frames) The AF-5XHD allows configuration of asymmetric TX and RX duty cycles. TX ratios include 25%, 33%, 50%, 66.7%, and 75%. • Configurable GPS Synchronization: The AF-5XHD offers configurable support for 2, 2.5, 4, and 5 ms frames. Timing is compatible with all other synchronous systems. • Split TX and RX Frequency: The radio can operateon different frequencies for TX and RX, allowing great flexibility for interference avoidance. • Split TX and RX Channel Bandwidth: Support for different channel bandwidths for TX and RX allows users to scale required data capacity more efficiently • Adaptive Modulation up to 1024QAM: Adaptive modulation rates of up to 1024QAM (4096QAM with targeted upgrade) are supported. • Dual Redundant Gigabit Ethernet Ports with PoE: The AF-5XHD has two Gigabit Ethernet ports that can be used to provide redundant PoE power. • OFDM and OFDMA Support: The radio offers flexible scheduling for 2, 4, or 8 sub channels. • Bluetooth Wireless Configuration: Use the built-in Bluetooth interface for wireless configuration. • AlignLock™ Antenna Aiming Guard This alerts the user when the radio or antenna aiming is changed due to tampering, impact, or storm damage. • User-Configurable Interference Mitigation Three user-selectable profiles support both high interference and greenfield deployments for robust, optimal performance. • Redundant Images for Fail-Safe Configuration Creation of backup firmware images ensures fail-safe configuration and enhances reliability. • Persistent Spectrum Analysis with Dedicated RX Perform real-time spectral analysis for the full band on live links without interrupting the link operation. • Wide Voltage Range, Enhanced Surge Protection The AF-5XHD has an operating voltage range of 24 48VDC and provides enhanced surge protection.   Specifications: Dimensions 224 x 82 x 48 mm (8.82 x 3.23 x 1.89") Weight 0.35 kg (0.77 lb) GPS External, Magnetic Base Operating Frequency 5150-5250MHz 5740-5850MHz Power Supply 24V, 1A PoE Gigabit Adapter (Included) Power Method Dual Passive Power over Ethernet Maximum Power Consumption 12W Supported Voltage Range 20-50VDC Mounting airFiber X Mount (Rocket Mount Compatible) GPS Pole Mount (Included) Certifications FCC Operating Temperature -40 to 55° C (-40 to 131° F) Data Port (1) 10/100/1000 Ethernet Port Configuration Port (1) 10/100/1000 Ethernet Port Processor LTU IC Maximum Throughput 1+ Gbps Maximum Range 200+ km (Throughput and range values may vary depending on the environmental conditions) Encryption 128-bit AES Operating System airOS F Max TX Power 29 dBm (Dependent on Regulatory Region) Frequency Accuracy ± 2.5 ppm without GPS Synchronization ± 0.2 ppm with GPS Synchronization Channel Bandwidth 10/20/30/40/50/60/80/100 MHz Selectable

Description: Details iShopping.pk brings you the best price for TP-Link 3G/4G Wireless N Router (TL-MR3420) with express shipping all over Pakistan.   Features: • Compatible with LTE/HSPA+/HSUPA/HSDPA/UMTS/EVDO USB modems, tested in the field •  3G/4G and WAN connection Backup guarantees an "Always-online" Internet connection •  Local wireless HD video sharing, with speeds up to 300Mbps •  Easy one-touch wireless security encryption with the WPS button •  Bandwidth control allows administrators to determine how much bandwidth is allotted to each PC   Specification: HARDWARE Interface 1 USB 2.0 Port for LTE/HSPA+/HSUPA/HSDPA/UMTS/EVDO USB Modem 1 10/100Mbps WAN Port, 4 10/100Mbps LAN Ports, support the auto-Negotiation and auto-MDI/MDIX Button                                                   WPS/Reset Button Wireless On/Off Switch Power On/Off Button External Power Supply 12VDC/1A Dimensions (W x D x H) 8*5.4*1.7 in. (204*138*44 mm) Antenna Type Omni directional, Detachable, Reverse SMA Antenna Gain 2x5dBi WIRELESS Wireless Standards IEEE 802.11b, IEEE 802.11g, IEEE 802.11n Frequency 2.4-2.4835GHz Transmit Power Wireless Security Support 64/128 bit WEP, WPA-PSK/WPA2-PSK, Wireless MAC Filtering SOFTWARE Security NAT Firewall, SPI Firewall, MAC / IP / Packet / Application / URL Filtering, Denial of Service(DoS), SYN Flooding, Ping of Death Management Web Based Configuration(HTTP), Web Based Firmware Upgrade OTHERS Certification CE, FCC, RoHS System Requirements Microsoft® Windows® 98SE, NT, 2000, XP, Vista™ Windows 7 or Windows 8, MAC® OS, NetWare®, UNIX® or Linux. Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing   What This Product Does Share the freedom of 3G/4G! The TL-MR3420 3G/4G Wireless N Router allows users to share a 3G/4G mobile broadband connection with family and friends via wired or wireless connections. By connecting a 3G/4G USB modem to the routers, a Wi-Fi hotspot is instantly established, via which multiple devices can access the Internet and share data and applications wirelessly.   Enjoy 3G/4G Wireless Sharing TL-MR3420 features blazing 4G speeds and backward compatible with 3G modems, allowing users to share a 3G/4G mobile broadband with family and friends via wired or wireless connection.   Tests in the Field-High Compatibility Compatibility is the most important aspect to consider when you're selecting a 3G/4G router. To ensure the best compatibility between our routers and the modem you would use with the router, TP-LINK has made certain that our 3G/4G Routers are compatible with the ISPs in the regions in which they are sold. We have teams around the globe continually testing our Routers with newly emerged modems to ensure that end users can feel confident that their routers will operate flawlessly where they live and work.   Comprehensive 3G/4G and WAN Connection Backup Strategy The TL-MR3420 stands out with its 3G/ 4G and WAN connection back-up, which keeps users online when one connection fails. TP-LINK's 3G/4G Router provides users with both 3G/4G Preferred and WAN Preferred back-up modes, while other brands provide one or the other. This brings users a high degree of flexibility when users are setting up the networks with considering connection costs and length of downtime.   Wireless N Speed & Range Complying with the IEEE 802.11n standard, the TL-MR3420 can establish a wireless network with transmission speeds of up to 300Mbps, while mitigating data loss over long distances and through obstacles in a small office or a large apartment, even in a steel-and-concrete building. Above all, users can easily pick up their wireless network's signal at longer distances from the router, where with legacy 11g products they would have to be much closer.

Description: Details iShopping.pk brings you the best price for AmpliFi AFi Standard Home Wi-Fi Router with 1 year international warranty and express shipping all over Pakistan.   Features: •  Single Router Base Station •  802.11a/b/g/n/ac Wi-Fi Network Standards •  Dual-Band 2.4 GHz / 5.0 GHz Frequencies •  4 x Gigabit LAN Ports •  1 x Gigabit WAN Port •  1 x Dual-Band Tri-Polar Antenna •  24 dBm Max. Transmit Power •  Intuitive Configuration & Management App     Specifications:   Enclosure Characteristics Plastic (PC) Management Interface Ethernet or Wi-Fi Networking Interface 1 x WAN 4 x LAN Wi-Fi / Gigabit Ethernet Power Consumption 11 W (max.) Power Method 9 V USB Power Supply 9 V, 1.7 A USB adapter Voltage 9 V ± 10% ESD/EMP Protection ± 24 kV air/contact Buttons 1 x Reset to defaults Antennas 1 x Dual-band antenna, tri-polarity LEDs White LED Display 1.6" / 40.6 mm diagonal 240 x 240, 212 ppi G+F touch Full color Wi-Fi Standards 802.11a/b/g/n/ac MIMO 3x3 Data Rates 2.4 GHz: 450 Mbps 5 GHz: 1300 Mbps Power Save Supported Wireless Security WPA2-PSK AES/TKIP Temperature & Humidity Operating Temperature: 14 to 131°F / -10 to 55°C Operating Humidity: 5 to 95% non-condensing Certifications FCC / CE / IC Suggested Max. TX Power 24 dBm Supported Data Rates (Mbps) 802.11ac: 13 Mbps to 1300 Mbps (MCS0 - MCS9, VHT 20/40/80) 802.11n: 6.5 Mbps to 450 Mbps (MCS0 - MCS15, HT 20/40) 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps 802.11b: 1, 2, 5.5, 11 Mbps 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps Dimensions 3.91 x 3.85 x 3.92" / 99.5 x 97.8 x 99.6 mm Weight 14.46 oz / 410 g

Cisco AIR-AP1832I-H-K9 Wireless Access Point / Aironet Specifictions Software Cisco Unified Wireless Network Software Release with AireOS wireless controllers: 8.1.121.0 or later for the Cisco Aironet 1830 Series Access Points Deployment modes Centralized, standalone, sniffer, Cisco FlexConnect ™, monitor, OfficeExtend, mesh Supported wireless LAN controllers Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Cisco Catalyst ® 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco 5520 Series Wireless Controllers, Cisco Flex ®  7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco 8540 Series Wireless Controllers, Cisco 5760 Wireless LAN Controller, Cisco Catalyst 3650 and 3850 Series Switches with integrated controller Cisco Mobility Express 802.11n version 2.0 (and related) capabilities 3x3 MIMO with two spatial streams Maximal ratio combining (MRC) 20- and 40-MHz channels PHY data rates up to 300 Mbps (40 MHz with 5 GHz) Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) 802.11 dynamic frequency selection (DFS) Cyclic shift diversity (CSD) support 802.11ac Wave 1 and 2 capabilities 3x3 MIMO with two spatial streams, single-user or multiuser MIMO MRC 802.11ac beamforming (transmit beamforming) 20-, 40-, and 80-MHz channels PHY data rates up to 867 Mbps (80 MHz in 5 GHz) Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) 802.11 DFS CSD support Integrated antenna 2.4 GHz, gain 3 dBi, internal omni, horizontal beamwidth 360° 5 GHz, gain 5 dBi, internal omni, horizontal beamwidth 360° Interfaces 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE) Management console port (RJ-45) USB 2.0 (enabled via future software) Indicators Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors Dimensions (W x L x H) Access point (without mounting bracket): 8.3 x 8.3 x 2 in. (210.8 x 210.8 x 50.8 mm) Weight 3.12 lb (1.41 kg) Environmental Cisco Aironet 1830i Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) Nonoperating (storage) altitude test: 25˚C, 15,000 ft. Operating temperature: 32° to 104°F (0° to 40°C) Operating humidity: 10% to 90% (noncondensing) Operating altitude test: 40˚C, 9843 ft. System memory 1 GB DRAM 256 MB flash Input power requirements AP1830: 44 to 57 VDC Power supply and power injector: 100 to 240 VAC; 50 to 60 Hz Power draw 15.4W Note: When deployed using a PoE specification, the power drawn from the power sourcing equipment will be higher by some amount, depending on the length of the interconnecting cable. Powering options 802.3af/802.3at Enhanced PoE Cisco local power supply, AIR-PWR-C= Cisco power injector, AIR-PWRINJ5= (Note:This injector supports 802.3af only), AIR-PWRINJ6= Note: If 802.3af PoE is the source of power, the USB port is disabled. Warranty Limited lifetime hardware warranty

UGreen Bluetooth Receiver 5.0 Wireles Audio Music RCA Price in Pakistan UGREEN Bluetooth Receiver allows you to connect your wired HIFI systems with your bluetooth devices. Just pair it up and get listening. Make Wired Speaker Wirelss with High Quality Sound: UGREEN Bluetooth 5.0 receiver with EDR makes your traditional speakers wireless with high quality sound and stable transmission with no lag, freeing you from the limit of long wire.with EDR supports high quality sound and ensures a steady audio transmission with no lag. Easy to Setup and Pair: plug a 3.5mm audio connector into 3.5mm jack of this wireless music adapter and pair with your Bluetooth enabled devices to enjoy music, automatic re-pairing for a hassle-free experience. Universal Compatibility: This Bluetooth 5.0 Receiver can be connected to any A/V receivers and any powered speakers with standard 3.5mm jack or 2RCA ports, ideal compatible for home theaters, stereo systems, and car stereos, also compatible with Smart Phones, iPod Touch, iPhone, iPad, and Android devices. NOTE: This is just a receiver not a transmitter. Stream Music on 2 Speakers Simutaneously: With both 3.5mm and 2RCA connection options, you can enjoy music wirelessly on 2 speakers simulteneously. Extra-long Battery Life: The Bluetooth adapter comes with built-in battery,supporting 8 hours playing time and only needs 2 hours to be charged fully. Please use the power adapter of DV 5V/2A Max to charge the receiver. Long-Range Wireless Connection: The wireless Bluetooth adapter supports the connection up to 10 meters/33 feet, controlling the music playing in a long distance.What You Get: 1* Ugreen Bluetooth 5.0 Audio RCA Receiver, 1* 3 feet 3.5mm Audio Cable, 1* 3 feet Micro USB 2.0 Cable UGREEN Bluetooth Aux Adapter 3.5mm & RCA Phono Bluetooth Receiver for HIFI Wireless Music Streaming with A2DP Enable Your Traditional Speakers with Bluetooth Function This Bluetooth receiver for home stereo connects any Bluetooth-enabled smartphones, tablets, and computers to powered traditional speakers or even your A/V receiver with 3.5mm or/and 2RCA audio cable. It allows users to stream music directly from Bluetooth devices to their favorite speakers. Stream Music on 2 Speakers It is with both 3.5mm and 2RCA(Left+ Right Sound) connection options and allowing you to enjoy music wirelessly on 2 speakers simultaneously. Bluetooth Receiver 5.0 Wireless Auido Music RCA Adapter for Home Car Music Streaming Sound with 3.5mm and 2RCA Advanced Bluetooth V5.0 + EDR Bluetooth v5.0 music receiver can provide higher quality and much clearer stereo sound than an old Bluetooth v3.0/2.0 receiver. EDR is short for ‘Enhanced Data Rate’, which ensures a faster data transmission rate and a much more stable connection between a Bluetooth device and the Audio Receiver. Recharge and Resume This Bluetooth receiver is allowed it to provide up to 8 hours of continuous quality music playback for car systems, home theaters, smartphones, and tablets. With a quick recharge time of only 2 hours, it’s easy to recharge and resume the music. Specification Bluetooth Version: 5.0 Output: Female R/L audio and 3.5mm audio Frequency Response: 20Hz-22kHz Output Power: 25mW, SNR: 100dB RL=16O Battery Capacity: 3.7V/200mA Operating Time: up to 8 hours and Micro USB for power supply(5V) Transmit Range: Up to 10m/33ft Approximate Charging Time: 2 hours Dimension: L66.6xW66.6xH24 (mm) P ackage Contents Bluetooth Receiver x 1 Micro USB Charge Cable x 1 3.5mm Audio Cable x 1 User Manual x 1

Interface: USB2.0 Frequency Range:2.4GHz-2.4835GHz Radio Data Rate: 11N:150/54/28/14/7/3(adaptive) 11G: 54/28/14/7/3 (adaptive) 11b: 11/5.5/2/1M (adaptive) Channel: 1~11 (US, Canada); 1~13 (Europe); 1~14 (Japan) Spread Spectrum: DSSS Modulation: BPSK, QPSK, CCK and OFDM (BPSK/QPSK/16-QAM/ 64-QAM) Transmission Distance: Indoor up to 100m, outdoor up to 300m (it is limited in an environment) Transmit Power: 15dBm Antenna plus: 2X2dBi LED Indicator: Status Data Security: WPA; 64/128-bit WEP; TKIP/AES Environment: Operating Temperature: 0-40(32~104) Operating Humidity: 10%~90% non-condensing

Item: Wifi USB Adapter Brand: ALFA Type: Wireless Interface: USB 2.0 Transfer Speeds: N 150 / 300Mbps Data Security: 64/128-bits WEP / WPA / WPA2 Frequency Range: 2.4 GHz - 2.4835 GHz Wireless Modes: Ad-Hoc / Infrastructure Mode Supported Standard: 802.11a, 802.11b, 802.11g, 802.11N, 802.11ac Wireless Security: WEP 64-Bit, WEP 128-Bit, WPA-PSK, WPA2-PSK Easy wireless security encryption Antenna: Internal 3dbi Antenna Transmit Power: 17 dBm Environment: 0C - 50C Amazing Data Transfer Speeds: N 300Mbps, AC 867Mbps Supports MHz: (20MHz / 40MHz) Supports Windows XP, Vista, 7, 8.1, Mac.10.5, 10.6, 10.7, 10.8, 10.9, 10.10 & Linux Package Include: Wifi USB Adapter / Mini Driver Disk

WRL-10822 Original SparkFun Features: Based on common 802.15.4 XBee footprint Ultra low power: 4uA sleep mode, 38mA active Onboard TCP/IP stack includes DHCP, UDP, DNS, ARP, ICMP, HTTP client, FTP client and TCP Firmware configurable transmit power: 0dBm to 12dBm Hardware interfaces:TTL UART Host data rate up to 464Kbps over UART Supports Adhoc and infrastructure networking 8 general purpose digital I/O 3 analog sensor inputs Real-time clock for time-stamping, auto-sleep, and auto-wakeup modes Accepts 3.3VDC regulated power supply Wire antenna Now Buy Online Shipping All Across Pakistan COMPANY: MATRIX ELECTRONICS CONTACT PERSON: FAIZAN MUNIR Mobile:03002785860 www.matrixelectronic.com Email : sales@matrixelectronic.com Email : info@matrixelectronic.com

Ideal for long-range deployments, the Ubiquiti UAP-AC-LR UniFi AC1300 simultaneous dual-band WiFi PoE access point offers simultaneous, dual-band operation with 3x3 MIMO in the 2.4 GHz band and 2x2 MIMO in the 5 GHz band. The innovative antenna design provides a long-range, symmetrical-link coverage area, and the antenna gain of this Ubiquiti UAP-AC-LR UniFi AC1300 AP performs better than one-way, high transmit power does for connecting distant clients. It is available in single, triple and five-packs, and can be configured with or without a hassle-free hosted cloud controller. Key Features Designed for Optimal RF Performance - The newly redesigned UniFi Controller optimises RF performance: Spectral Analysis - Collects feedback on full 5GHz and 2.4GHz WiFi channel interference Band Steering: Pushes connected WiFi clients to faster interference-free 5GHz channels. Airtime Fairness: Minimises problem-client effects on system performance by limiting their airtime access Powerful Hardware- Features the latest in WiFi 802.11AC MIMO technology with WiFi speeds up to 1300Mbps (450Mbps + 867Mbps) Includes UK Power Cable - No need to purchase additional cable for use in the United Kingdom, 1.8m IEC C5 cable included Google Maps Integration - Upload your own custom coverage maps or configure your map using the built-in Google Maps API. L3 Manageability - With L3 manageability, the UniFi Controller software can be run on a different subnet than the UniFi APs it manages, allowing 'no-touch' AP provisioning Multi-Site Management - A single UniFi Controller can manage multiple, distributed deployments and multi-tenancy for managed service providers. You can configure settings and administrator accounts specific to each deployment. One UniFied Network - Option to create one large wireless network across multiple APs that lets users move around the network wirelessly. Events and Alerts - UniFi makes it easy to view and set up email delivery of alerts and recent event notifications on your network(s). Access Points (APs) - Easily install, configure, and manage all access points from one location. Guest Portal/Hotspot Support - Easy customisation and advanced options for Guest Portals include authentication, Hotspot setup options, and the ability to run as an external portal server. Take advantage of UniFi's rate limiting for your Guest Portal and Hotspot package offerings. Apply different bandwidth rates (download/upload), limit total data usage, and limit duration of use. All UniFi AC APs include Hotspot functionality: Built-in support for billing integration using major credit cards via PayPal. Built-in support for voucher-based authentication. Built-in Hotspot Manager for voucher creation, guest management, and payment refund. Full customisation of Hotspot portal pages. Scalable enterprise WiFi management UniFi is the revolutionary WiFi system that combines enterprise performance, unlimited scalability, and a central management controller. The Ubiquiti UAP-AC-LR UniFi access points has a refined industrial design and can be easily installed using the included mounting hardware. Easily accessible through any standard web browser, the UniFi Controller software is a powerful software engine ideal for high-density client deployments requiring low latency and high uptime performance. Use the UniFi Controller software to quickly configure and administer an enterprise WiFi network – no special training required. RF map and performance features, real-time status, automatic UAP device detection, and advanced security options are all seamlessly integrated. http://dreamsnw.com/ Avalaible at Dreams Network & Technology (Pvt) Ltd. Contact: LHR: 04235784892 KHI: 02134710763, 02134711677, 02134721416

Backpack COFDM intercom transmitter radio video two way audio Product Description 2 way audio COFDM video intercom transmitter for NLOS long range wireless (SG-VT10) is a broadcast cofdm wireless video transmitter. NLOS wireless transmitter transmit good resolution image, acts as video walkie-talkie system, adopts COFDM modulation. COFDM wireless audio video transmitter has well safety, and this wireless video transmitter is encrypted with AES128 bit, AES 256 bit. Long range wireless cofdm transmitter has conventional modulation techniques, and it overcomes the reflection and coverage. COFDM wirelesss video transmitter has better anti-jamming capacity than transmission multipath simulation technique. 2 way audio COFDM video intercom transmitter for NLOS long range wireless is suitable for army training, fire rescue, marine remote control security application for its nearly live transmission high-speed mobile images and high quality image in NLOS or complicated working conditions Main Advantages: portable wireless 5000m COFDM modulation (stable transmission) two way audio LOS & NLOS video transmitter Low delay Dual aerials connectors two cooling fans Super long range transmission Parameters Item name Portable wireless 5000m COFDM video transmitter for 2 way audio Model No. SG-VT10 Power Supply DC11-14.5V/2.7A (aviation plug) Modulation COFDM 2K QPSK RF Bandwidth 2/2.5/4/8MHz(adjustable) FEC 1/2 2/3 3/4 7/8 (optional) Guard Interval 1/32 1/16 1/8 1/4(optional) Data Encryption AES 128/256 Bits/td Max speed 450km/h Video Input BNC/RCA Audio Input standard Aviation plug, support two-way intercome Video Compression Format H.264 Video Resolution standard 720P ,1280*720 RF Interface N (two aerial connectors) Work Environment/td -40℃~70℃ Transmission Distance Appr. 5km NLOS (for manpack) Case Material Aluminum; black Size 200*130*60mm Weight 2.5kg Delivery 1-3 working days delivery time

  XG2128 E1 BER tester is a small and muni-functional handheld E1 line test instrument which is to do BER test, frame analysis, time slot analysis, signaling test, sign analysis, alarm analysis and so on. It is not only durable and easy to use, but also has high performance-to-providing ratio, especially for simplifies installation and maintenance testing for faster problem resolution. Basic Functions: 1. 120 ohm and 75 ohm line interfaces 2. HDB3 and AMI line codes 3. Out-of-service framed and unframed testing 4. 2MB/s, Nx64Kb/s BER testing 5. Frame data and alarm monitoring 6. Clock slip measurement 7. Frequency and level measurement 8. Clock source: Internal, Interface 9. Testing pattern: PRBS, Fix Code, 16-BIT User Word 10. Error injection: Single and Fixed Rate 11. Real-time transmit circuit open/short indication 12. Manual and auto-timer measurement 13. G. 821, G. 826, and M. 2100 performance analysis 14. Test results uploaded, conserved and printed by TestMana

Description: Details iShopping.pk brings you the best price for TP-Link Gigabit Single-Mode Media Converter (MC210CS) with express shipping all over Pakistan.   Specification: MEDIA CONVERTER & MODULE Standards and Protocols IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z Basic Function Extends fiber distance up to 9.3 miles (15km) Ports 1 x 1000M SC/UPC port 1 x 10/100/1000M RJ45 port (Auto MDI/MDIX) Wave Length 1310nm Network Media 1000BASE-LX Single-mode Fiber Network Media 1000BASE-T UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) LED Indicators PWR, Link/Act Dimensions (W*D*H) 3.7 × 2.9 × 1.1 in. (95 × 73 × 27 mm) Power Supply External Power Adapter Max Power Consumption 1.8W Safety & Emission FCC, CE, RoHS Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing   What This Product Does The MC210CS is a media converter designed to convert 1000BASE-LX fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-LX standards, the MC210CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC210CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data. Auto MDI/MDI-X for TX port, and front panel status LEDs. The MC210CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 9.3 miles (15km).