D link device

DESCRIPTION D link wifi router in good condition with charger Mention that you found this ad on DealMarkaz.pk when you call.

totally new modem with 1 year warranty. it also support Qubee device ptcl evo witribe worldcall and 3g 4g LTE usb devices.and the range of this device is covered easily 10 marla home. market price of this modem is 3000 and i will give in 2800 the reason is box is opened thats why. best for Qubee Device because qubee gives you 2mbps internet speed with 70gbs download in 1200

DESCRIPTION Cash on Delivery available all over Pakistan. *Unlocked ZTE 802ZT 4G 988Mbps LTE Hotspot. *4G Bands 1/2/3/4/8/11/12/17/28/41/42 Sim Router Mobile WiFi. *802ZT It works as long as the band is compatible with the local operator. *The device is unlocked and the device supports English Language. *4G band:Band1/2/3/4/8/12/17/28/41/42 *The fastest down to 988Mbps *High speed communication Data communication can be used comfortably with high-speed communication with a maximum download speed of 988 Mbps. *Support 5CA (bundling carrier aggregation of 5 bands). In addition, the "4x4 MIMO" technology uses four antennas for transmission (base station) and reception (terminal) to simultaneously transmit multiple data, thereby increasing data density and increasing the amount of data that can be transmitted at one time "256QAM". *Comfortable use Simply use the smartphone's camera to load the QR code displayed on the display and you can easily connect. *With a 3,000 mAh large capacity battery, the battery lasts approximately 12 hours. * 2 QR code reader recommends the following. iPhone: "Standard Camera", Smartphone: "Dad QR" * 3 This applies when carrier aggregation is not applied. Usage time depends on network side standards, usage environment and radio wave conditions *FDD-LTE / AXGP / TDD-LTE / W-CDMA • OS: Win-dows 10 / 8.1 / 8/7 Mac OS X 10.9 to 10.14 • Frequency: AXGP (2.5 GHz, 3.5 GHz), FDD-LTE (700 MHz, 900 MHz, 1.5 GHz, 1.7 GHz, 2.1 GHz), W-CDMA (900 MHz, 2.1 GHz) AXGP (2.5GHz, 3.5 GHz)), FDD-LTE (700MHz, 900MHz, 1.7GHz, 1.7GHz / 2.1GHz, 1.9GHz, 2.1GHz), W-CDMA (900MHz, 1.7GHz / 2.1GHz, 1.9GHz,2.1GHz) • Size (W x D x H): Approximately 112 x 67.5 x 15.6mm • Weight: Approximately 153g • Number of connectable units: 16 • Battery: 3,000mAh • Communication speed: (Maximum downlink / uplink) 988Mbps / 37.5Mbps • Interface: USB Type-C • Waterproof performance: IPX2 • Dustproof performance: IP5X Mention that you found this ad on DealMarkaz.pk when you call.

WORLD LINK COMMUNICATIONS Computers & Networking Services Office # A/10, 2nd Floor Kashif Palaza Abapra Islamabad. (Pakistan) Phone:- 0092-51-3097488, 2550351 Mobile:- 03065000059 Email:- Wlc_Technology@yahoo.com web: www.worldandco.jimdo.com

WORLD LINK COMMUNICATIONS Computers & Networking Services Office # A/10, 2nd Floor Kashif Palaza Abapra Islamabad. (Pakistan) Phone:- 0092-51-3097488, 2550351 Fax:- 0092-51-3097488 Mobile:- 03065000059 Email:- Wlc_Technology@yahoo.com web: www.worldandco.jimdo.com

300Mbps wireless speed ideal for interruption sensitive applications like HD video streaming* Two antennas greatly increase the wireless robustness and stability Easy wireless security encryption at a push of WPS button IP based bandwidth control allows administrators to determine how much bandwidth is allotted to each PC Compatible with IPv6 -the more recent Internet Protocol version TP-LINK Tether App allows quick installation and easy management using any mobile device

DESCRIPTION Used with chargeer also cash on deliveery Delivery charhes include Mention that you found this ad on DealMarkaz.pk when you call.

DESCRIPTION Awesome condition just like new with charger More dettail conatct me whatsapp Mention that you found this ad on DealMarkaz.pk when you call.

D-Link 5‑Port Desktop Gigabit Poe+ Switch 5x Gigabit Ethernet ports (4x PoE+ ports) PoE+, 60W power budget 10 Gbps switching fabric capacity Plug & Play simplicity for easy installation 2-Year D-Link Warranty 5x Gigabit Ethernet ports (4x PoE+ ports) PoE+, 60W power budget 10 Gbps switching fabric capacity Plug & Play simplicity for easy installation 2-Year D-Link Warranty Fast. Compact. Convenient. The D‑Link DGS‑1005P 5‑Port Desktop Gigabit PoE+ Switch enables you to connect Power over Ethernet (PoE) devices such as wireless access points (APs), network video cameras and IP phones to the network. Built with home and small business users in mind, the DGS‑1005P is compact and operates silently, making it ideal for most rooms and offices. Gigabit Performance. The DGS-1005P features plug-and-play installation and requires no configuration. Automatic MDI/MDI-X support on all ports removes the need for crossover cables when connecting to another switch, and auto-negotiation on each port intelligently adjusts the port speed for compatibility with the connected device. With wire-speed filtering and store-and-forward switching, the DGS-1005P maximises network performance while minimising the transmission of bad network packets.                       Power Over Ethernet+ The DGS-1005P features four Gigabit Ethernet ports that support the IEEE 802.3af and IEEE 802.3at PoE, supplying up to 30 W on each PoE port and providing a total power budget of 60 W. You can connect compatible devices to the DGS-1005P without using an additional power supply. This allows you to save on cabling and power supplies and to install devices on locations without immediate access to power outlets. Green Technolog The DGS-1005P features green technology such as IEEE 802.3az Energy-Efficient Ethernet (EEE), link status detection, and cable length detection. EEE adjusts the power consumption of the switch based on network utilisation, reducing energy use during periods of inactivity. Link status detection powers down unused ports, saving power when connected devices are shut down or disconnected. Cable length detection adjusts the power output of the port based on the cable length, reducing the power requirements of the switch. Compact and Silent The compact design of the DGS-1005P allows placement in most locations, including those where space is at a premium. The desktop form factor provides everything you need to set up a new network or expand an existing network, while the fanless design ensures silent operation even in noise-sensitive areas such as workstations and meeting rooms.   Specs: Type Unmanaged Number of ports 5 ports Layer Layer 2 Main type of ports 1000BASE-T Gigabit Ethernet Switching capacity 10 Gbps PoE options 802.3af 802.3at Number of PoE ports 4 PoE power budget See datasheet Fanless   802.3az Energy-Efficient Ethernet support   Form Factor Desktop Housing Metal Jumbo frame yes Cable diagnostics yes MAC address 2K  

D-Link DAP-2680 AC1750 Wave 2 Dual‑Band WI-FI PoE Access Point  802.11ac Wave 2 wireless, up to 1.75 Gbps • MU-MIMO with beamforming • Band steering • Gigabit PoE-capable LAN port • AP Array utility support • Free D-Link Central WiFiManager AC1750 Wave 2 Wi-Fi 802.11ac Wave 2 wireless with combined speeds of up to 1.75 Gbps AC1750 Wave 2 Wi-Fi 802.11ac Wave 2 wireless with combined speeds of up to 1.75 Gbps Band steering Automatically steers traffic to the fastest, least congested band. MU-MIMO & Beamforming Allows multiple devices to connect simultaneously for improved efficiency. And creates highly-targeted Wi-Fi connections for superior Wi-Fi bandwidth. Smart, secure & green The wireless scheduler feature, which turns off wireless functionality when it isn’t needed, saves power and increases network security. Faster Wi‑Fi, Faster Business The DAP‑2680 Wireless AC1750 Wave 2 Dual‑Band PoE Access Point features cutting‑edge Wave 2 technology that brings greater speeds, efficiency, and security to your wireless customers. Perfect for small to medium business or enterprise environments. Be the best with Wave 2 Boost your business network to maximum wireless signal rates of up to 450 Mbps over the 2.4 GHz band, and 1300 Mbps over the 5 GHz band. Beamforming with MU‑MIMO Beamforming focuses the Wi-Fi signal to improve both range and connection strength so your clients can enjoy a superior Wi-Fi experience. Built-in Multiple-Input and Multiple-Output (MU-MIMO) technology gets high-bandwidth Wi-Fi signals to multiple devices simultaneously, for faster data distribution and efficiency.   The Perfect Fit for Your Network Multiple operational modes allow you to select the DAP-2680 to operate as an access point, a Wireless Distribution System (WDS), a WDS with access point, or a wireless client.   Business Quality of Service The Wi-Fi Multimedia (WMM) and Quality of Service (QoS) features make it an ideal access point for audio, video, and voice applications. When enabled, QoS allows the DAP-2680 to automatically prioritise network traffic. Customised priority rules can be adjusted through the web GUI. AP Load Balancing limits the maximum number of users per access point to ensure maximum performance. Easy‑mount setup It can be ceiling mounted, wall mounted or placed on a desk. Integrated 802.3at Power over Ethernet (PoE) enables the device to be deployed easily and in more areas, where power outlets are not readily available. Corporate‑Class Security Secure your business network with Personal and Enterprise versions WPA2 (802.11i), with support for RADIUS server backend or a built‑in internal RADIUS server. MAC address filtering, wireless LAN segmentation, SSID broadcast disable, rogue AP detection, and wireless broadcast scheduling further protect your wireless network. It supports up to eight VLANs per band, allowing multiple SSIDs to segment users. Includes a wireless client isolation mechanism, which limits direct client-to-client communication. Additionally, it supports Network Access Protection (NAP), a feature of Windows Server® 2008 and upwards, allowing network administrators to define multiple levels of network access based on an individual client’s needs. D‑Link WiFiManager Control from a central location up to a thousand access points anywhere in the world, with easy-to-use management controls. Reveal compelling insights into your business network, push out configurations and organise your network so it always runs at optimal performance.  

Description: Details iShopping.pk brings you the best price for TP-Link JetStream 24-Port Gigabit L2 Managed Switch with 4 SFP Slots (TL-SG3428-V1) with express shipping all over Pakistan.   Details: Full Gigabit Ports: 24× gigabit RJ45 ports and 4× gigabit SFP Slots provide high-speed connections. Integrated into Omada SDN: Zero-Touch Provisioning (ZTP)*, Centralized Cloud Management, and Intelligent Monitoring. Centralized Management: Cloud access and Omada app for ultra-convenience and easy management. Static Routing: Helps route internal traffic for more efficient use of network resources. Robust Security Strategies: IP-MAC-Port Binding, ACL, Port Security, DoS Defend, Storm control, DHCP Snooping, 802.1X, Radius Authentication, and more. Optimize Voice and Video Applications: L2/L3/L4 QoS and IGMP snooping. Standalone Management: Web, CLI (Console Port, Telnet, SSH), SNMP, RMON, and Dual Image bring powerful management capabilities Software Defined Networking (SDN) with Cloud Access Omada’s Software Defined Networking (SDN) platform integrates network devices, including access points, switches and gateways, providing 100% centralized cloud management. Omada creates a highly scalable network—all controlled from a single interface. Seamless wireless and wired connections are provided, ideal for use in hospitality, education, retail, offices, and more. Secure Networking Security features include IP-MAC-Port-VID Binding, Port Security, Storm Control, and DHCP Snooping to defend against a range of network threats. An integrated list of common DoS attacks is available, making it easier than ever to prevent them. In addition, the Access Control Lists (ACL, L2 to L4) feature restricts access to sensitive network resources by denying packets based on source and destination MAC address, IP address, TCP/UDP ports, or VLAN ID. Users’ network access can be controlled via 802.1X authentication, which works with a RADIUS/Tacacs+ server to grant access only when valid user credentials are provided. Advanced QoS Voice and video traffic can be prioritized based on IP address, MAC address, TCP port number, UDP port number, and more. With QoS (Quality of Service), voice and video services remain smooth, even when bandwidth is in short supply. Abundant L2 and L2+ Features A complete lineup of L2 features are supported including 802.1Q VLAN, Port Mirroring, STP/RSTP/MSTP, Link Aggregation Control Protocol, and 802.3x Flow Control. Advanced IGMP Snooping ensures the switch intelligently forwards multicast streams to only the appropriate subscribers, cutting out unnecessary traffic, while IGMP throttling & filtering restrict each subscriber on a port level to prevent unauthorized multicast access. Static Routing is a simple way of segmenting the network and internally routs traffic through the switch for improved efficiency. ISP Features QinQ, L2PT, PPPoE ID Insertion, and IGMP authentication features are provided, developed with service providers in mind. 802.3ah OAM and Device Link Detection Protocol (DLDP) offer easy monitoring and troubleshooting of Ethernet links. IPv6 Support IPv6 functions such as Dual IPv4/IPv6 Stack, MLD Snooping, IPv6 ACL, DHCPv6 Snooping, IPv6 Interface, Path Maximum Transmission Unit (PMTU) Discovery and IPv6 Neighbor Discover guarantee your network is ready for the Next Generation Network (NGN) without upgrading your hardware. Enterprise Level Management Features Easy to manage via an intuitive web-based Graphical User Interface (GUI) or an industry-standard Command Line Interface (CLI). For both management methods, traffic is protected through SSL or SSH encryption. SNMP (v1/v2c/v3) and RMON support enables the switch to be polled for valuable status information and to send traps on abnormal events.   Specifications: HARDWARE FEATURES Interface • 24× 10/100/1000 Mbps RJ45 Ports • 4× Gigabit SFP Slots • 1× RJ45 Console Port • 1× Micro-USB Console Port Fan Quantity Fanless Power Supply 100-240 V AC~50/60 Hz Dimensions (W x D x H) 17.3 × 7.1 × 1.7 in (440 × 180 × 44 mm) Mounting Rack Mountable Max Power Consumption 19.22 W (110 V/60 Hz) Max Heat Dissipation 65.58 BTU/h (110 V/60 Hz) PERFORMANCE Switching Capacity 56 Gbps Packet Forwarding Rate 41.66 Mpps MAC Address Table 8K Jumbo Frame 9 KB SOFTWARE FEATURES Quality of Service • 8 priority queues • 802.1p CoS/DSCP priority • Queue scheduling - SP (Strict Priority) - WRR (Weighted Round Robin) - SP+WRR • Bandwidth Control - Port/Flow based Rating Limiting • Smoother Performance • Action for Flows - Mirror (to supported interface) - Redirect (to supported interface) - Rate Limit - QoS Remark L2 and L2+ Features • Link Aggregation - Static link aggregation - 802.3ad LACP - Up to 8 aggregation groups and up to 8 ports per group • Spanning Tree Protocol - 802.1d STP - 802.1w RSTP - 802.1s MSTP - STP Security: TC Protect, BPDU Filter, BPDU Protect, Root Protect, Loop Protect • Loopback Detection - Port-based - VLAN based • Flow Control - 802.3x Flow Control - HOL Blocking Prevention • Mirroring - Port Mirroring - CPU Mirroring - One-to-One - Many-to-One - Tx/Rx/Both L2 Multicast • Supports 511 (IPv4, IPv6) IGMP groups • IGMP Snooping - IGMP v1/v2/v3 Snooping - Fast Leave - IGMP Snooping Querier - IGMP Authentication • IGMP Authentication • MVR • MLD Snooping - MLD v1/v2 Snooping - Fast Leave - MLD Snooping Querier - Static Group Config - Limited IP Multicast • Multicast Filtering: 256 profiles and 16 entries per profile VLAN • VLAN Group - Max 4K VLAN Groups • 802.1q Tagged VLAN • MAC VLAN: 12 Entries • Protocol VLAN: Protocol Template 16, Protocol VLAN 16 • GVRP • VLAN VPN (QinQ) - Port-Based QinQ - Selective QinQ • Voice VLAN Access Control List • Time-based ACL • MAC ACL - Source MAC - Destination MAC - VLAN ID - User Priority - Ether Type • IP ACL - Source IP - Destination IP - Fragment - IP Protocol - TCP Flag - TCP/UDP Port - DSCP/IP TOS - User Priority • Combined ACL • Packet Content ACL • IPv6 ACL • Policy - Mirroring - Redirect - Rate Limit - QoS Remark • ACL apply to Port/VLAN Security • IP-MAC-Port Binding - DHCP Snooping - ARP Inspection - IPv4 Source Guard • IPv6-MAC-Port Binding - DHCPv6 Snooping - ND Detection - IPv6 Source Guard • DoS Defend • Static/Dynamic Port Security - Up to 64 MAC addresses per port • Broadcast/Multicast/Unicast Storm Control - kbps/ratio/pps control mode • IP/Port/MAC based access control • 802.1X - Port based authentication - Mac based authentication - VLAN Assignment - MAB - Guest VLAN - Support Radius authentication and accountability • AAA (including TACACS+) • Port Isolation • Secure web management through HTTPS with SSLv3/TLS 1.2 • Secure Command Line Interface (CLI) management with SSHv1/SSHv2 IPv6 • IPv6 Dual IPv4/IPv6 • Multicast Listener Discovery (MLD) Snooping • IPv6 ACL • IPv6 Interface • Static IPv6 Routing • IPv6 neighbor discovery (ND) • Path maximum transmission unit (MTU) discovery • Internet Control Message Protocol (ICMP) version 6 • TCPv6/UDPv6 • IPv6 applications - DHCPv6 Client - Ping6 - Tracert6 - Telnet (v6) - IPv6 SNMP - IPv6 SSH - IPv6 SSL - Http/Https - IPv6 TFTP L3 Features • 16 IPv4/IPv6 Interfaces • Static Routing - 48 static routes • Static ARP • 316 ARP Entries • Proxy ARP • Gratuitous ARP • DHCP Server • DHCP Relay • DHCP L2 Relay Management • Web-based GUI • Command Line Interface (CLI) through console port, telnet • SNMPv1/v2c/v3 - Trap/Inform - RMON (1, 2, 3, 9 groups) • SDM Template • DHCP/BOOTP Client • 802.1ab LLDP/LLDP-MED • DHCP AutoInstall • Dual Image, Dual Configuration • CPU Monitoring • Cable Diagnostics • EEE • Password Recovery • SNTP • System Log Advanced Features • Support Omada Hardware Controller (OC200/OC300), Software Controller, Cloud-Based Controller • Automatic Device Discovery • Batch Configuration • Batch Firmware Upgrading • Intelligent Network Monitoring • Abnormal Event Warnings • Unified Configuration • Reboot Schedule • ZTP (Zero-Touch Provisioning)* OTHERS Certification CE, FCC, RoHS Environment • Operating Temperature: 0–45 ℃ (32–113 ℉); • Storage Temperature: -40–70 ℃ (-40–158 ℉) • Operating Humidity: 10–90% RH non-condensing • Storage Humidity: 5–90% RH non-condensing

Description: Details iShopping.pk brings you the best price for TP-Link 16-Port Gigabit Desktop/Rackmount Switch (TL-SG1016D) with express shipping all over Pakistan.   Features: • 16 10/100/1000Mbps ports •  Supports MAC address self-learning, Auto MDI/MDIX and Auto negotiation •  Plug & play design • Innovative energy-efficient technology saves power consumption • Supports IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode • Non-blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput • 32Gbps Switching Capacity • 10KB Jumbo frame improves performance of large data transfers • Auto-MDI/MDIX eliminates the need for crossover cables • Supports MAC address auto-learning and auto-aging • Store and forward Switching scheme • Auto-negotiation ports provide smart integration between 10Mbps, 100Mbps and 1000Mbps hardware. • Plug and Play design simplifies installation   Specifications: HARDWARE Standards and Protocols IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x Interface 16 10/100/1000Mbps RJ45 Ports (Auto Negotiation/Auto MDI/MDIX) Network Media 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) 100BASE-TX/1000BASE-T: UTP category 5, 5e or above cable (maximum 100m) Fan Quantity Fanless Power Supply 100-240VAC, 50/60Hz Power Consumption Maximum: 13.3W (220V/50Hz) Dimensions (W x D x H) 11.6*7.1*1.7 in. (294*180*44 mm) PERFORMANCE Switching Capacity 32Gbps Packet Forwarding Rate 23.8Mpps MAC Address Table 8K Jumbo Frame 10KB Green Technology Innovative energy-efficient technology saves power up to 15% Transfer Method Store-and-Forward OTHERS Certification FCC, CE, RoHs System Requirements Microsoft® Windows® XP, Vista™, Windows 7 or Windows 8, MAC® OS, NetWare®, UNIX® or Linux. Environment                           Operating Temperature: 0℃~40℃ (32℉~104℉); Storage Temperature: -40℃~70℃ (-40℉~158℉); Operating Humidity: 10%~90% non-condensing; Storage Humidity: 5%~90% non-condensing   You now have the choice to go green when upgrading to a gigabit network! This new generation TL-SG1016D 16-Port Gigabit Switch features the latest innovative energy-efficient technologies that can greatly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status and cable length to limit the carbon footprint of your network.   Power down Idle Ports  When a computer or network equipment is off, the corresponding port of a traditional switch will continue to consume considerable amounts of power. The TL-SG1016D can automatically detect the link status of each port and reduce the power consumption of ports that are idle.   Power Budget According to Cable Length  Ideally, shorter cables would use less power because of less power degradation over their length; this is not the case with most devices as they will use the same amount of power across the cable regardless of whether it is 10 or 50 meters (32.8 or 164.0 feet)in length. The TL-SG1016D analyzes the length of the Ethernet cable connected and adjusts the power usage accordingly, rather than keeping the power consumption in a conventional solution. The auto features of this gigabit switch make installation plug and play and hassle-free. No configuring is required. Auto MDI/MDIX eliminates the need for crossover cables. Auto-negotiation on each port senses the link speed of a network device (10, 100, or 1000 Mbps) and intelligently adjusts for compatibility and optimal performance. The TL-SG1016D 16-Port Gigabit switch provides an easy way to make the transition to Gigabit Ethernet. All 16 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play. Moreover, with the innovative energy-efficient technology, the TL-SG1016D can save up to 40%* of the power consumption, making it an eco-friendly solution for your business network. Featured with 16 10/100/1000Mbps ports, TL-SG1016D greatly expands your network capacity, enabling instant large files transferring. So，power users in the home, office, workgroup, or creative production environment can now move large, bandwidth-intensive files faster. Transfer graphics, CGI, CAD, or multimedia files across the network instantly.

Description: Details iShopping.pk brings you the best price for TP-Link 8-Port Gigabit Desktop Switch with 4-Port PoE (TL-SG1008P) with express shipping all over Pakistan.   Features: • 8 10/100/1000Mbps RJ45 ports •  With four PoE ports, transfers data and power on one single cable •  Working with IEEE 802.3af compliant PDs, expands home and office network •  Requires no configuration and installation  •  802.1p/DSCP QoS enable smooth latency-sensitive traffic • Supports PoE power up to 15.4W for each PoE port • Supports PoE power up to 55W for all PoE ports • Supports PoE IEEE 802.3af compliant PDs • Supports IEEE 802.3x flow control for Full-duplex Mode and backpressure for Half-duplex Mode • 4K entry MAC address table of the TL-SG1008P with auto-learning and auto-aging • 802.1p/DSCP QoS enable smooth latency-sensitive traffic • LED indicators for monitoring power, link, activity and speed • External power adapter supply   Specification: HARDWARE Interface 8 10/100/1000Mbps RJ45 Ports AUTO Negotiation/AUTO MDI/MDIX Network Media 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 100BASE-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Fan Quantity Fanless Power Consumption 65.2W (max. with 55w PoE device connected) 5.5W (max. no PoE device connected) External Power Supply External Power Adapter(Output: 48VDC / 1.25A) PoE Ports (RJ45) Standard: 802.3 af compliant PoE Ports: Port1- Port4 Power Supply: 55W Backbound Bandwidth 16Gbps Mac Address Table 4K Dimensions (W x D x H) 6.7*3.9*1.1 in. (171*98*27 mm) SOFTWARE Transmission Method Store-And-Forward Advanced Functions Compatible With IEEE 802.3af Compliant PDs Priority Function Mac Address Auto-Learning And Auto-Aging EEE802.3x Flow Control 802.1p/DSCP QoS OTHERS Certification CE, FCC, RoHS Consumption 65.2W (max. with 55w PoE device connected) 5.5W (max. no PoE device connected) Environment Operating Temperature: 0°C~40°C (32°F~104°F) Storage Temperature: -40°C~70°C (-40°F~158°F) Operating Humidity: 10% ~ 90% non-condensing Storage Humidity: 5%~90% non-condensing   What This Product Does 8-Port Gigabit Desktop Switch with 4-Port PoE provides the seamless network connection. It integrates 1000Mbps Gigabit Ethernet and 10/100Mbps Fast Ethernet network capabilities.    How This Product Works 4 of the 8 Auto-Negotiation RJ45 ports (port-1 to port-4) of the switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc.     Overload Arrangement TL-SG1008P has the priority* function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is >= 55W, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port.     Port Priority Function Priority (port 1=port 2=port 3>port 4): This function will help protect the system if the system power becomes overloaded. For example, Port 1, 2 and 4 are using 15.4W (maximum power per port is 15.4W), the system power is 46.2W in total. If there is an additional PD inserted to Port 3 with 10W then the system will cut off Port 4 to protect the system, this means Port 1, 2 will use 15.4W, and Port3 will use 10W, and no power will be supplied to Port 4.   Easy To Use TL-SG1008P is easy to install and use. It requires no configuration and installation. With desktop design, outstanding performance and quality, the TP-LINK TL-SG1008P 8-Port Gigabit Desktop Switch with 4-Port PoE is a great selection for expanding your home or office network. 

Description: Details iShopping.pk brings you the best price for Pyle Pro HD Smart Projector with Android CPU with 1 year international warranty and express shipping all over Pakistan.   Features:     • Android 4 OS with 1.2 GHz CPU • Brightness of 1200 Lumens • 1280 x 800 (WXGA) Native Resolution • Single-Chip 0.45" DLP Imaging Device • LED Light Source Lasts 30,000 Hours • Two HDMI, VGA and Composite Inputs • USB for Viewing Photos, Video, Documents • Supports DLP-Link Active 3D Glasses   Specification: Image Display Display System 1-Chip 0.45" / 11.43 mm DLP Native Resolution 1280 x 800() Supported Resolutions 720 x 400 640 x 480 800 x 600 1024 x 768 1152 x 864 1280 x 1024 1400 x 1050 1680 x 1050 640 x 350 Supported Formats Photo: BMP, GIF, JPEG, JPG, PNG Video: 3GP, AVI, DAT, FLV, MOV, MP4, MPEG-4, RM, RMVB, TS, WMV Audio: AAC, MP3, OGG, WAV, WMA Data: DOC, DOCX, PPT, TXT, XLS, XLSX Format NTSC M PAL 60, B, D, G, H, I, N SECAM HDTV Compatibility 1920 x 1080p 1920 x 1080i 1280 x 720p 720 x 576p 720 x 576i 720 x 480p 720 x 480i Brightness 1200 Lumens Aspect Ratio Native: 16:10 Supported: 16:9 Supported: 4:3 Dynamic Contrast Ratio 10000:1 DLP Link 3D Yes Lens Throw Distance 9.5 - 120.0" / 24.1 - 304.8 cm Throw Ratio 0.042361111 Projection Size 20 - 115"  Features Built-In Speaker Yes, 2 W (Stereo) Internal Memory 4.0 GB Input/Output Connectors Inputs/Outputs 2x HDMI Audio/Video (Input) 1x 15-pin VGA Video (Input) 1x AV Audio/Video (Input) 1x 1/8" (3.5 mm) Mini Headphone (Output) 1x USB 2.0 Type-A Female 1x Micro USB Type-B Female  Wireless LAN Yes General Lamp (Bulb) 1x LED Life Normal Mode: 30000 Hours Remote Control Yes  Menu Languages English Simplified Chinese Power Requirements 19 VDC Input Current 3.7 A Temperature Operating 32 to 104°F (0 to 40°C) Storage -4 to 140°F (-20 to 60°C) Dimensions (WxHxD) 6.4 x 1.5 x 4.4" / 16.3 x 3.8 x 11.2 cm  without foot 6.4 x 1.6 x 4.4" / 16.3 x 4.1 x 11.2 cm  with foot Weight 15.6 oz / 442.3 g   The HD Smart Projector with Android CPU from Pyle Pro features an embedded computer running android OS, giving it similar functionality to a tablet, but able to project on a much bigger screen. An LED light source outputs 1200 lumens in 2D mode at full brightness and doesn't burn out the way a conventional tungsten bulb does, for a lamp life of up to 30,000 hours. A single 0.45" DLP imaging device produces a 1280 x 800 (WXGA) native resolution, 16:10 aspect ratio picture. Through scaling, the projector can also accommodate 1080p/i, 720p, NTSC, and PAL sources. There are two HDMI inputs which support 3D for connection to computers, Blu-ray Disc players, game consoles, and more. There is also a VGA input for computers with analog graphics, which can be adapted to accept a component signal using a separately available adapter cable. For card readers or USB storage devices, there is a USB type A port that lets you view photos, play video, or access documents such as Microsoft Word and Excel files directly through the projector's operating system. For legacy camcorders, VCRs, and other analog equipment there is a mini composite A/V input and an adapter is supplied (an additional extension cable may still be required).   Embedded Android 4 OS With Wi-Fi connectivity for Internet access (where there is a router or access point available), this projector lets you enjoy a similar Android experience as you would get with a tablet or smartphone but in a much larger image. You can surf the Web, watch movies and listen to podcasts, play games, and more. The CPU features a 1.2 GHz processor, 512 MB of RAM, and 4GB internal memory   Supports up to 115"-Diagonal Screen Size Depending on the amount of ambient light, and where the projector is placed in relation to the screen, it is possible to throw and image between 20 and 115"   DLP-Link 3D Support This projector can be paired with DLP-Link compatible active 3D glasses for watching 3D content from the HDMI input or a USB storage device. Because the brightness will be reduce significantly, the 3D function should only be used in a dark setting, and the recommended image size is 40"-diagonal   Tripod Mountable A standard 1/4"-20 tripod socket means you can use a regular camera tripod or camera mount with this projector   Picture Customization • The following picture settings are provided: • Adjust Image Quality • Focus • Brightness • Zoom (digital) • 3D Settings   Features: • Decodes 7.1-channel audio •  Two 1 W speakers built-in • Headphone jack

Description: Details iShopping.pk brings you the best price for TP-Link 10/100Mbps WDM Media Converter (MC111CS) with express shipping all over Pakistan.   Specification: MEDIA CONVERTER & MODULE Standards and Protocols IEEE 802.3, IEEE 802.3u Basic Function Adopts WDM technology Half/Full-Duplex transfer mode for FX port minimize the loss caused by link failure timely Extends fiber distance up to 20km (12.5 miles) Ports 1 x 100M SC/UPC port 1 x 10/100M RJ45 port (Auto MDI/MDIX) Wave Length 1550nm Tx/1310nm Rx WDM TX 1550nm WDM RX 1310nm Network Media 10BASE-T UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Network Media 100BASE-T UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Network Media 100BASE-FX Single-mode Fiber LED Indicators PWR, Link/Act Dimensions (W*D*H) 3.7 x 2.9 x 1.1 in. (95 x 73 x 27 mm) Power Supply External Power Adapter Max Power Consumption 2.49W Safety & Emission FCC, CE, RoHS Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing   What This Product Does The MC111CS is a media converter designed to convert 100BASE-FX fiber to 10/100Base-TX copper media or vice versa. Adopting WDM technology, MC111CS takes only one fiber cable to transmit and receive data, which will half cable cost for you. Designed with IEEE 802.3u 100Base-TX and 100Base-FX standards, the MC111CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC111CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1550nm on transferring data and at 1310nm on receiving data. So the other end device to cooperate with the MC111CS should work at 1310nm on transferring data and at 1550nm on receiving data. Another TP-LINK´s media converter MC112CS is just one of the examples to cooperate with MC111CS. Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, and front panel status LEDs. The MC111CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers(12.5 miles).

Description: Details iShopping.pk brings you the best price for TP-Link 10/100Mbps WDM Media Converter (MC112CS) with 18 months official warranty express shipping all over Pakistan.   Specification: MEDIA CONVERTER & MODULE Standards and Protocols IEEE 802.3, IEEE 802.3u Basic Function Adopts WDM technology Half/Full-Duplex transfer mode for FX port minimize the loss caused by link failure timely Extends fiber distance up to 20km Ports 1 x 100M SC/UPC port 1 x 10/100M RJ45 port (Auto MDI/MDIX) Wave Length 1310nm Tx/1550nm Rx WDM TX 1310nm WDM RX 1550nm Network Media 10BASE-T UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Network Media 100BASE-T UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Network Media 100BASE-FX Single-mode Fiber LED Indicators PWR, Link/Act Dimensions (W*D*H) 3.7 x 2.9 x 1.1 in. (95 x 73 x 27 mm) Power Supply External Power Adapter Max Power Consumption 2.41W Safety & Emission FCC, CE, RoHS Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing   What This Product Does The MC112CS is a media converter designed to convert 100BASE-FX fiber to 10/100Base-TX copper media and vice versa. Adopting WDM technology, MC112CS takes only one fiber cable to transmit and receive data, which will save half cabling cost for you. Designed under IEEE 802.3u 100Base-TX and 100Base-FX standards, the MC112CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC112CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on transferring data and at 1550nm on receiving data. So the other end device to cooperate with the MC112CS should work at 1550nm on transferring data and at 1310nm on receiving data. Another TP-Link´s media converter MC111CS is just one of the examples to cooperate with MC112CS. Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port. The MC112CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers (12.5 miles).

Description: Details iShopping.pk brings you the best price for TP-Link 16-Port 10/100Mbps Rackmount Switch (TL-SF1016) with express shipping all over Pakistan.   Features: • 16 10/100Mbps RJ45 ports •  Innovative energy-efficient technology saves power up to 75% •  Supports MAC address self-learning and auto MDI/MDIX •  Standard 19-inch rack-mountable steel case • Supports IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode • Non-blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput • 3.2 Gbps Switching Capacity • Store and forward Switching scheme  • Auto-MDI/MDIX eliminates the need for crossover cables • Supports MAC address auto-learning and auto-aging • Auto-negotiation ports provide smart integration between 10Mbps, 100Mbps hardware. • Plug and Play design simplifies installation • Fanless design to make sure it works quietly   Specification: HARDWARE Standards and Protocols IEEE 802.3i, IEEE 802.3u, IEEE 802.3x Interface 16 10/100Mbps RJ45 Ports AUTO Negotiation/AUTO MDI/MDIX Network Media 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) 100BASE-TX: UTP category 5, 5e or above cable (maximum 100m) Fan Quantity Fanless Power Supply 100-240VAC, 50/60Hz Power Consumption Maximum: 2.23W (220V/50Hz) Dimensions (W x D x H) 17.3*7.1*1.7 in. (440*180*44 mm) PERFORMANCE Switching Capacity 3.2Gbps Packet Forwarding Rate 2.38Mpps MAC Address Table 8K Buffer Memory 2Mb Green Technology Innovative energy-efficient technology saves power up to 70% Transfer Method Store-and-Forward OTHERS Certification FCC, CE, RoHS System Requirements Microsoft® Windows® 8, 7,Vista™, XP or MAC® OS, NetWare®, UNIX® or Linux. Environment Operating Temperature: 0℃~40℃ (32℉~104℉); Storage Temperature: -40℃~70℃ (-40℉~158℉); Operating Humidity: 10%~90% non-condensing; Storage Humidity: 5%~90% non-condensing   What This Product Does The 16-Port 10/100Mbps Rackmount Switch TL-SF1016 provides you with a high-performance, low-cost, easy-to-use, seamless and standard upgrade to improve old network to 100Mbps network. All 16 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play. Moreover, with the innovative energy-efficient technology, the TL-SF1016 can save up to 75%* of the power consumption and 80% of the packaging material can be recycled, making it an eco-friendly solution for your business network.   TP-LINK Green Technology This new generation The 16-Port 10/100Mbps Switch TL-SF1016 features the latest innovative energy-efficient technologies that can greatly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status and cable length to limit the carbon footprint of your network. It also complies with the EU'S RoHS, prohibiting the use of certain hazardous materials. Besides, 80% of the packaging material can be recycled.   High Performance The rack-mount size steel case design, combined with a safety-certified internal power supply, make the switch the most robust product, which is very cost-effective for a less than 16-user environment. Featuring non-blocking switching architecture, TL-SF1016 forwards and filters packets at full wire-speed for maximum throughput. And IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode alleviate the traffic congestion and make TL-SF1016 work reliably.   Easy to Use The auto features of this fast ethernet switch make installation plug and play and hassle-free. No configuring is required. Auto MDI/MDIX eliminates the need for crossover cables. Auto-negotiation on each port senses the link speed of a network device (10, 100 Mbps) and intelligently adjusts for compatibility and optimal performance. 

Description: Details iShopping.pk brings you the best price for TP-Link 10/100Mbps WDM Media Converter (MC112CS) with express shipping all over Pakistan.   Specification: MEDIA CONVERTER & MODULE Standards and Protocols IEEE 802.3, IEEE 802.3u Basic Function Adopts WDM technology Half/Full-Duplex transfer mode for FX port minimize the loss caused by link failure timely Extends fiber distance up to 20km Ports 1 x 100M SC/UPC port 1 x 10/100M RJ45 port (Auto MDI/MDIX) Wave Length 1310nm Tx/1550nm Rx WDM TX 1310nm WDM RX 1550nm Network Media 10BASE-T UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Network Media 100BASE-T UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Network Media 100BASE-FX Single-mode Fiber LED Indicators PWR, Link/Act Dimensions (W*D*H) 3.7 x 2.9 x 1.1 in. (95 x 73 x 27 mm) Power Supply External Power Adapter Max Power Consumption 2.41W Safety & Emission FCC, CE, RoHS Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing   What This Product Does The MC112CS is a media converter designed to convert 100BASE-FX fiber to 10/100Base-TX copper media and vice versa. Adopting WDM technology, MC112CS takes only one fiber cable to transmit and receive data, which will save half cabling cost for you. Designed under IEEE 802.3u 100Base-TX and 100Base-FX standards, the MC112CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC112CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on transferring data and at 1550nm on receiving data. So the other end device to cooperate with the MC112CS should work at 1550nm on transferring data and at 1310nm on receiving data. Another TP-Link´s media converter MC111CS is just one of the examples to cooperate with MC112CS. Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port. The MC112CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers (12.5 miles).