Control board

Name:12V charger power control board Adjustable from 10v - 14v by potentometer Led Indication: Power, charging, full battery Power Supply Voltage:13.8-14.8V Relay Operating Voltage:12.4V Relay Disconnect Voltage:14.8V Voltage Tolerance:+/-0.1V Charging Type:12V storage battery Potentiometer Adjustment:RP1 RP2 Size:73*52*27mm

Preserve electricity for your future generation with EnerNatural. We’re offering Smart Switchboards for electricity control for your bills-minimization and happiness-maximization. Install our smart switchboard in your home and offices to make you think,” What a good deal I’ve ever made”

Support wireless Bluetooth 5.0 function Color LCD screen display With USB (U Disk), TF, FM Radio Power failure memory function 24C02 Support 5-10 meters distance infrared remote control operation

Remote control 1.Operating voltage: DC12V (27A/12V battery x1) 2.Operating Current: 10mA @ 12V 3.Radiated power: 10mw @ 12V 4.Modulation mode: ASK (Amplitude Modulation) 5.Transmitting frequency: /433MHZ 6.Transmission distance:50-100M (Open field, the receiver sensitivity of -100dbm) 7.Encoder types: fixed code With decoding receiver board 1.The operating voltage DC5V, receiver sensitivity is-98db. Leg 7 bits, respectively, VT, D3, D2, D1, D0, the +5 V and GND. VT is a valid signal high output pin Upon receiving a valid signal, the pin output high, may also drive the relay. 2.Size: 6.6*22*41mm There are four buttons on the remote control, and respectively correspond to the four data bits to the receiving board output pin D0, D1, D2, and D3 of. Press the buttons transmit signals, the corresponding data bit is output high. Package include:1 x IC2262/2272 4 channel 1 x 4 key Wireless remote controller

Breakout - MPR121 SparkFun Description: This is a breakout board for Freescale�s MPR121QR2. The MPR121 is a capacitive touch sensor controller driven by an I2C interface. The chip can control up to twelve individual electrodes, as well as a simulated thirteenth electrode. The MPR121 also features eight LED driving pins. When these pins are not configured as electrodes, they may be used to drive LEDs. There a four jumpers on the bottom of the board, all of which are set (closed) by default. An address jumper ties the ADD pin to ground, meaning the default I2C address of the chip will be 0x5A. If you need to change the address of the chip (by shorting ADD to a different pin), Capacitive Touch Sensor make sure you open the jumper first. Jumpers also connect SDA, SCL and the interrupt pin to 10k pull-up resistors. If you don�t require the pull-up resistors you can open the jumpers by cutting the trace connecting them. Now Buy Online Shipping All Across Pakistan COMPANY: MATRIX ELECTRONICS CONTACT PERSON: FAIZAN MUNIR Mobile:03002785860 www.matrixelectronic.com Email : sales@matrixelectronic.com Email : info@matrixelectronic.com