Cnc motor

DESCRIPTION Support for Windows XP, Windows 7 32/64bit, Windows8, Windows10 operating system; Applicable to all versions of mach3 software; Support for CNC controlled 5-Axis, can connect five stepper motor driver or servo driver; The maximum output pulse frequency is 100KHz, and the pulse width can automatically change with the pulse frequency, which can be applicable to the closed-loop driver of strict requirements on pulse; Five optocoupler isolation input signal interfaces: limit switch, emergency stop switch, auto tool zero sensor, home switch, NPN sensor switch can be connected; Inverter control signal interface (optocoupler isolation): Output 0-10V speed control signal, PWM speed control signal, spindle start control signal, used for mach3 software to control spindle’s speed, start and stop; Four universal output signal interfaces, the maximum output 500MA current, can drive relays, solenoid valves, used to control mist, pumps, cylinders and other equipments; Support for external connect electronic hand wheel, use HDR15 interface to connect electronic hand wheel, used for manual control of machine tools; Add the enable signal interface, can be used to control the driver enable signal; The power of control card: voltage 12-24VDC, current more than 500MA. Colour:Blue Material: Plastic + Metal Mention that you found this ad on DealMarkaz.pk when you call.

DESCRIPTION Condition: Used, Check Test, Ok Made in: Germany Power: 4.5kw (4500w) Voltage: 220V Max. RPM: 12000 Frequency: 300Hz Length (without Holder): 16.75inch Collet: ER-20 Weight: 22.93kg Stock: 1piece Item Code: SR09 Features: Self locking system Best for metal cutting Air cooling System Mention that you found this ad on DealMarkaz.pk when you call.

DESCRIPTION Condition: Used, Check Test, Ok Power: 2.4kw (2400w) Voltage: 220V Max. RPM: 10000 Frequency: 334Hz Length (without Holder): 240mm Diameter: 80mm Collet: ER-20 Weight: 7.16kg Stock: 1piece Item Code: SR10 Features: Best for metal cutting Water cooling System Mention that you found this ad on DealMarkaz.pk when you call.

DESCRIPTION Condition: New • Power supply: 24VDC • Number of controlled axis: Single axis; can achieve a variety of complex operation: positioning control and non-positioning control; • The maximum output frequency: 40KHZ • Output frequency resolution: 1Hz • Programmable maximum number of rows: 99 • Signal input: 6 (optical isolation) • Signal output: 3 (optical isolation) • A continuous displacement range: -7,999,999 ~ 7,999,999 • Operating state: Auto-run mode, manual operation, the program edit mode, parameter setting status; • Lifting speed curve: 2 (optimization) •Display digits: 8 digital display, manual / automatic status display, run / stop status display, the number of steps / counts / procedures display, edit the program, parameter display, input / output status display, pulse and direction display • Auto-run feature: You can edit, you can control the start and stop operation ect. automatically through the panel buttons and adding switches that connected to the back of the terminals • Manual operation functions: position adjustment (manual jog speed and jog the number of steps can be set) • Parameter setting function: Starting frequency, acceleration and deceleration curve, reverse clearance, manually run length, manual speed, back to zero speed and interrupt jump the line all can be set • Program editing functions: You can insert, delete, modify the program. The controller can identify the error Instruction • Return to Zero features: It can return to zero from the positive and negative directions automatically •The number of programming instructions: 14 •External operating functions: interrupt operation through parameter setting and add switches that connected to the terminals A and B Mention that you found this ad on DealMarkaz.pk when you call.

Usage: CNC Shield V4.0 can be used as a driver expansion board for BUIDING machines and need to be used with Arduino NANO. There’re 3 slots in the board for stepper motor drive modules, which can drive 3 stepper motors. You can build 1. CNC 2. Writing Machine 3. Laser Engraver AND MANY OTHER PROJECTS. It works on GRBL firmware. And there are many projects you can find online based on GRBL PACKAGE INCLUDES 1X ARDUINO NANO 1X CNC SHIELD 3X A4988 DRIVERS I CAN VIA CORRIER ANYWHERE IN PAKISTAN

DESCRIPTION Condition: Used, Only Structure Working Area: 380mm X 300mm Size: 20.5 X 15.5 X 12inch (L*W*H) Weight: 17.84kg Note: Only structure is contained in this machine, Control panel will be provided separately. Central Mill Road House #10, Jhang Road Near To Motor Market, Faisalabad, Punjab, Pakistan

DESCRIPTION Condition: Used, Check Test, Ok RPM: 6000rpm Voltage: 24V/DC Diameter: 44mm Total Length: 120mm Bit Size: 3mm Weight: 482g Stock: 6Piece Item Code: SR08 Mention that you found this ad on DealMarkaz.pk when you call.

DESCRIPTION Stabilizer.pk HOME or CITY DELIVERY AVAILABLE One Year Full Warranty. اَلحَمْدُ لِله We deals in Automatic SERVO MOTOR and RELAY TYPE Voltage Stabilizers Stabilizer.pk O302-O111900 اَلحَمْدُ لِله Our Stabilizers Runs your Equipment Even in Low Main Voltage AS ONLY 50 VOLTS 1 year warranty with parts. 100% genuine copper winding (GUARANTEED) Specs for: SERVO MOTOR controlled, Automatic Voltage Stabilizers & Regulators. Input Voltage: 150 To 250 AC Output Voltage: 110v & 220v AC (±) 1% Frequency: 45 or 60 Hz Wave Form: Non-distorted Sine-wave Response Time: 25ms / V Efficiency: 95 % Power Factor: 0.95 Relative Humidity: 30% to 80% (without condensation) Temperature Rise: Less Then 50c Control System: DC. Servo Motor Insulation Resistance: More then 3M?? at 500V DC Tested: 1500 V Standard Power Ratings Available in Single-Phase & 3-Phase: 500VA, 1kVA, 2kVA, 3kVA, 5kVA, 10kVA, 30kVA. Up-to 500kVA Specs for: RELAY controlled, Automatic Voltage Stabilizers & Regulators. Input Voltage: 50/80/100/125/150 AC Output Voltage: 220v AC (±) 8% Frequency: 50 to 60 Hz Control System: Relay We deals in Automatic Voltage Stabilizer for UPS, for AC Air-Conditioner, for LCD/LED TV) for Washing Machine, for Treadmill, for Photocopier Machine. for Television, for Music System, for Refrigerators, for Ultra sound Machines, for Embroidery Machines, for All Sensitive Equipment, for Signaling Devices, for CNC Machines, for Air Conditioning Plants, for Telecommunication Networks, for Motor Loads, for Data Processing Equipment, for Bio Medical Equipment, for Drives, for PLC’s, for Induction Heating, for Hotels, for Defense Application, for Industrial Units, for Lighting Loads, for Residential/ Offices, for Farm Houses, for R & D Institutions, for Home Mainline Stabilizers, for Sophisticated Laboratory Equipment etc. Runs your Appliances Even in Low Main Voltage. وولٹیج سٹیبلائزر Cargo and home delivery available in All Pakistan Feel Free to Call: Zeeshan Asim. + a92 a302 a0111900 info at stabilizer dot pk http: //stabilizer dot pk Mention that you found this ad on DealMarkaz.pk when you call.

DESCRIPTION Condition: Used, Check Test, Ok Length: 19.25 inch Width: 150mm Height: 64mm Working: 9.25 inch Pitch: 4mm Ball Screw Diameter: 16mm Fitting: 200w & 400w Servo Motor Weight: 8.27kg Stock: 2pieces Item Code: AC-175 Other products of CNC related are also available, Delivery across all over Pakistan. Self-pickup in Faisalabad. Linear Actuators in Pakistan. Mention that you found this ad on DealMarkaz.pk when you call.

DESCRIPTION Condition: Used, Check Test, Ok Length: 20.5 inch Width: 90mm Height: 72mm Working: 12 inch Pitch: 10mm Ball Screw Diameter: 15mm Fitting: 200w Servo Motor Weight: 5.96kg Stock: 1piece Item Code: AC-193 Other products of CNC related are also available, Delivery across all over Pakistan. Self-pick in Faisalabad. Linear Actuators in Pakistan. Mention that you found this ad on DealMarkaz.pk when you call.

DESCRIPTION Condition: Used, Check Test, Ok Length: 16.5 inch Width: 90mm Height: 72mm Working: 8 inch Pitch: 10mm Ball Screw Diameter: 15mm Fitting: 200w Servo Motor Weight: 5.16kg Stock: 1piece Item Code: AC-192 Other products of CNC related are also available, Delivery across all over Pakistan. Self-pick in Faisalabad. Linear Actuators in Pakistan. Mention that you found this ad on DealMarkaz.pk when you call.

DESCRIPTION Condition: Used, Check Test, Ok Length: 12.5 inch Width: 74mm Height: 66mm Working: 4 inch Pitch: 10mm Ball Screw Diameter: 15mm Fitting: 100w Servo Motor Weight: 3.28kg Stock: 1piece Item Code: AC-191 Other products of CNC related are also available, Delivery across all over Pakistan. Self-pick in Faisalabad. Linear Actuators in Pakistan. Mention that you found this ad on DealMarkaz.pk when you call.