Cisco linksys wireless n

· Wi-Fi 5 (802.11ac) · 802.3af PoE-Compliant · Desktop Mount Design · Gigabit Ethernet LAN Port · 2.4 GHz / 5 GHz (Dual-Band)

Linksys WAP1200AC AC1200 Wi-Fi  The  Linksys WAP1200AC AC1200 Wi-Fi Access Point  is the latest in the AC-series access points, which utilizes the  Cross Band technology.  It can be used as a  Wireless Range Extender  or a  Wired Access Point.  Both functions maximize simultaneous use of the 2.4 GHz and 5 GHz bands for high-speed data transfer, uninterrupted streaming, and gaming.   Front Panel    Antenna positioning is done depending on the type of home you have. IMPORTANT:   The antennas are fixed and can  ONLY  rotate at  180 degrees.  Do  NOT  force the antennas too far back, otherwise, they will break. For  Single-story homes  -   Both antennas should be pointing  down. NOTE:   For illustration purposes, the Linksys RE6700 is used in this example. For  Multi-story homes  -  One (1)  antenna should  always be pointing down  to provide coverage for the current floor.  The second antenna (any antenna) should be positioned differently  depending  on where the Linksys WAP1200AC is located and where the coverage is needed. NOTE:   For the most part, position one (1) antenna at  45 degrees  as shown in  Position   A  below.  If there are issues with coverage, move the antenna at about  50-55 degrees  down as shown in  Position   B.    Position A  can be used if the Linksys WAP1200AC is in the  middle  of the house.   Position B  can be used if the Linksys WAP1200AC is connected to an outlet located at the  farther side  of the house.   Side Panel    Wi-Fi Protected Setup™ (WPS)  button – Uses the WPS technology to automatically and securely add wireless devices to your network.  Reset  button – Press and hold for  10 seconds  to reset the Linksys WAP1200AC to factory default settings.   Bottom Panel    ETHERNET  port – Connect an Ethernet-enabled device to the network using either a  Cat 5  or  6  Ethernet cable.   Product Features Concurrent dual-band (2.4 GHz and 5 GHz) 802.11ac Wireless technology Compatible with 802.11 a/b/g/n Data Rate of up to 300 Mbps for 2.4 GHz and up to 867 Mbps for 5 GHz Two (2)  external non-detachable antennas 2 x 2 Spatial Streams One (1)  10/100/1000 Fast Ethernet port with auto MDIX sensing Spot Finder technology (on Range Extender Mode only) Wi-Fi Protected Setup™ (WPS) Browser-based Setup (BBS) Cross Band technology  (on Range Extender Mode only) Beamforming technology LED Behaviors  Power / WPS LED: OFF  – There is no power on the Linksys WAP1200AC. Blinking Green   / Yellow  – The Linksys WAP1200AC is starting up, resetting to factory defaults, upgrading its firmware, or the WPS connection is in process. Solid Green   / Yellow  – The Linksys WAP1200AC is ready to use. Solid Amber   / Red  – There is a weak connection with the router. NOTE:   To fix this issue, unplug the Linksys WAP1200AC and move it closer to the router. Blinking Amber / Red  – The Linksys WAP1200AC is not connected to the router, or the WPS pairing failed. NOTE:   To fix this issue, make sure that your router has an active Internet connection and the Wi-Fi is turned ON.  If the router is working fine, unplug the Linksys WAP1200AC then move it closer to the router.  Plug it back in, wait for one (1) minute, and reconnect to your network.  Ethernet LED  –   It lights up solid  Green  when an Ethernet device is connected and active.  It will blink when sending or receiving data over the Ethernet port.   Product Requirements Wi-Fi enabled computers or mobile devices AC power outlet Ethernet router or switch with available RJ45 Ethernet port and RJ45 Cable for Access Point mode or wireless network for Range Extender mode For browser configuration: Internet Explorer® 8 or higher Safari® 5.1 for Mac® or higher Google Chrome™ 25.0 or higher Firefox® 20 or higher   

Description: Details iShopping.pk brings you the best price for Linksys AC3200 MU-MIMO Dual-Band Gigabit Wireless Router (WRT3200ACM) with 1 year official warranty and express shipping all over Pakistan.   Highlights: •  802.11a/b/g/n/ac Wi-Fi Standards •   Up to 3200 Mbps Wi-Fi Data Throughput •   Simultaneous Dual-Band Support •   4 x Dual-Band Detachable Antennas •   4 x Gigabit Ethernet LAN Ports •   1 x Gigabit Ethernet WAN Port •   1 x USB 3.0 Port •   1 x Combo eSATA/USB 2.0 Port •   MU-MIMO Technology •   Tri-Stream 160 MHz Wireless Connectivity   Linksys AC3200 MU-MIMO Dual-Band Gigabit Wireless Router (WRT3200ACM) With a 1.8 GHz enterprise grade dual-core processor the  WRT3200ACM Dual-Band Wireless-AC3200 Gigabit Router  from  Linksys  has enough processing power to handle multiple data streams simultaneously. Take advantage of enhanced wireless network functionality as the WRT3200ACM supports wireless 802.11a/b/g/n/ac networking standards and functions on both the 2.4 GHz and 5 GHz frequencies. With simultaneous dual-band connectivity you benefit from data transfer rates up to 3.2 Gbps, which is perfect for streaming HD content, online gaming, and more. This router also supports Tri-Stream 160 MHz connectivity accompanied by MU-MIMO technology offering three separate data streams for a total bandwidth of up to 2.6 Gbps. The WRT3200ACM router features four detachable external antennas, four Gigabit Ethernet ports, one eSATA port, one USB 2.0 port, and one USB 3.0 port. The four upgradable antennas provide expansive wireless networking connectivity while the four Gigabit Ethernet ports ensure a fast, reliable, wired networking option. Additionally, the integrated eSATA port, USB 2.0 and USB 3.0 ports make it simple to attach peripherals such as external hard drives. For enhanced networking functionality the WRT3200ACM comes equipped with Smart Wi-Fi software giving you the ability to monitor nearly every aspect of your network. Whether on a PC or mobile device you can monitor your network, set parental controls, restrict network access, and more. This router is also open-source ready giving advanced users the ability to modify the router including the option to take advantage of available open source firmware.   Ultra Fast Wi-Fi Bring ultra-fast AC Wi-Fi to your home with the WRT3200ACM MU-MIMO Open Source Wi-Fi Router. Equipped with Tri-Stream 160 and premium MU-MIMO technologies, this open-source router delivers fast, uninterrupted dual-band Wi-Fi speeds to multiple devices at the same time.   Tri-Stream Technology Equipped with innovative Tri-Stream 160 technology, the WRT3200ACM delivers enhanced Wi-Fi speeds with virtually no lag. Not available on other Wi-Fi routers, Tri-Stream 160 effectively doubles the bandwidth of the 5 GHz band to power data-heavy activity with ultra-fast 2.6 Gbps Wi-Fi speeds.   DFS Certified Dynamic frequency selection (DFS) certification from the FCC not only allows operation at 160 MHz enabling Tri-Stream160, but it also triples the channels available at 80 MHz, so your router can operate in the clearest airspace that other Wi-Fi routers aren't allowed.   MU-MIMO Thanks to MU-MIMO technology, the WRT3200ACM router can handle even the most bandwidth-intensive environments. MU-MIMO builds upon longtime broadcasting cornerstones--such as spatial multiplexing, beamforming, and scheduling algorithms--to boost overall throughput and distribute Wi-Fi bandwidth fairly between devices. Each connected client device receives its own dedicated data stream, so users won't have to compete with one another for bandwidth. Multiple users can simultaneously engage in 4K video streaming, play online games, and perform other data-intensive tasks without latency or buffering.   Enterprise Grade 1.8 GHz Processor Boosts Throughput Equipped with an enterprise-grade dual-core processor, the WRT3200ACM packs the computing power needed to handle even the heaviest network traffic and deliver the lowest latency. The result is a fast, responsive home network that never lags.   Open Source Firmware Offers Advance Customization Advanced users can harness the expanded potential of the WRT3200ACM router by customizing with open source firmware. Using packages from established open source distributions like OpenWrt and DD-WRT, you can: • Set up a secure VPN • Turn the router into a web server • Create and manage hotspots • Capture, analyze, and manage network traffic • Detect network intrusion • Access TOR network for anonymous browsing • Employ many other advanced open source features   Specifications: Wi-Fi Technology: AC3200 MU-MIMO Dual-band Gigabit, 600+2600 Mbps  Key Features: 802.11a  802.11g  802.11n  802.11ac Wi-Fi Speed: AC3200 (N600 + AC2600)  Wi-Fi Bands: 2.4 and 5 GHz (simultaneous dual-band)  Wi-Fi Range: Very Large Household  Number of Ethernet Ports: 1x Gigabit WAN port  4x Gigabit LAN ports Other Ports: One(1) USB 3.0 port  One(1) Combo eSATA/USB 2.0 port  Power Antennas: 4x external, dual-band, detachable antennas  Processor: 1.8 GHz dual-core  LEDs: Power, Internet, 2.4 GHz, 5 GHz, eSATA, USB1 (USB 2.0), USB2 (USB 3.0), LAN 1–4 (activity/10/100 Mbps), LAN 1–4 (1 Gbps), WPS  Wireless Encryption: WPA2 Personal, WPA2 Enterprise  VPN Support: PPTP  IPSec pass‐through Operation Modes: Wireless Router  Access Point  Wired Bridge  Wireless Bridge  Wireless Repeater Storage File System Support: FAT, NTFS, and HFS+  Easy Setup: Browser-based Setup  Linksys Smart Wi-Fi Setup Certified Operating Systems: MacOS (10.X or higher), Windows 7, Windows 8.1 (Works with Windows 10)  Minimum System Requirements: Internet Explorer® 8  Safari® 5 (for Mac®)  Firefox® 8  Google Chrome™ Dimensions (LxWxH): 245.87 x 193.80 x 51.82 mm(9.68 x 7.63 x 2.04 in.) without antennas  Weight: 798.32 g(28.16 oz)  Operating Temperature: 32 to 104 F (0 to 40 C)  Storage Temperature: -4 to 140 F (-20 to 60 C)  Operating Humidity: 10 to 80% Noncondensing  Security Features: WPA/WPA2  128 bit AES link encryption Regulatory Compliance: FCC class B  Other Certifications: FCC DFS Certified  Additional Information: Open Source ready for OpenWrt, DD-WRT  Power Supply: Input: 100-240V ~ 50-60Hz; Output: 12V, 3.0A 

Description: Details iShopping.pk brings you the best price for Linksys AC750 Dual Band WiFi Access Point (WAP750AC-ME) with 1 year official warranty and express shipping all over Pakistan   Features: • Extend Wi-Fi range for enhanced coverage • Connect wired devices to your wireless network • First time ever plug-in access point   Specifications: Wi-Fi Technology: 802.11 a/b/g/n/ac  Network Standards: 802.11 a/b/g/n/ac  Wi-Fi Speed: 2.4GHz: Up to 300Mbps; 5 GHz up to 433 Mbps  Wi-Fi Bands: 2.4GHz & 5GHz  Number of Ethernet Ports: 1  Easy Setup: YES  Minimum System Requirements: • • PC, Mac®, smartphone, or tablet with Wi-Fi enable • • AC power outlet • • Dual-band 802.11 a/b/g/n/ac wireless router or access point • • Microsoft® Internet Explorer® 8.0, Firefox® 20, Safari® 5.1, or • Google Chrome™ 25.0 browsers or higher  Security Features: Wi-Fi Protected Setup™ button  WPA®/WPA2® encryption  WEP encryption   BOOST WI-FI COVERAGE Upgrade your network to 802.11ac and extend coverage throughout your home.   EASY SETUP Place Access Point in electrical socket, connect to router via cable and follow simple configuration procedure via Tablet, Smartphone or computer.   SIMULTANEOUS DUAL BAND (2.4 + 5 GHZ) Two independent, dedicated Wi-Fi bands that deliver combined speeds of up to 733 Mbps.   EXTERNAL ANTENNAS Two external antennas for enhanced performance and throughput.

Description: Details iShopping.pk brings you the best price for Cisco Wireless-AC Dual Radio Wave 2 Access Point with 2.5GbE LAN Data Sheet (WAP581-E-K9) with 1 year official warranty and express shipping all over Pakistan   Features: ● Concurrent dual-band radio support offers up to 2.1 Gbps on a 5.0-GHz radio and 600 Mbps on a 2.4-GHz radio to use capacity and coverage most efficiently. ● Robust security, including WPA2, 802.1X with RADIUS secure authentication, and rogue access point detection, help protect sensitive business information. ● Wi-Fi Scheduler allows you to control your Wi-Fi network access during business and non-business hours. ● An integrated Wireless Packet Capture tool assists tech support in troubleshooting. ● Intelligent QoS prioritizes network traffic to help keep critical network applications running at top performance. ● Support for power-saving sleep mode and port control features help increase energy efficiency. ● Workgroup Bridge mode lets you expand your network by wirelessly connecting to a second Ethernet network. ● Support for IPv6 lets you deploy future networking applications and operating systems without costly upgrades. ● Sleek design with multiple internal antennas and a versatile mounting kit allows for installation on a ceiling, wall or desktop. ● Offers limited lifetime hardware warranty provides peace of mind.   Specifications: Standards IEEE 802.11ac, 802.11a, 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (spanning tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), and IPv6 (RFC 2460) Cabling type Category 5e or better Antennas Internal antennas optimized for installation on a wall or ceiling Operating system Linux Software Physical Interfaces Ports 2 GE ports - one 2.5G and second one 10/100/1000 Ethernet, with support for 802.3at at PoE; support is only for port 1 Buttons Reset button Lock slot Slot for Kensington lock LEDs One multifunction LED Physical Specifications Physical dimensions 1.5 x 9.0 x 9.0 in. (38x 229 x 229 mm) (H x W x D) Weight 3 lb (1.4kg) Network Capabilities VLAN support Yes Number of VLANs 1 management VLAN plus 32 VLANs for SSIDs 802.1X supplicant Yes Service Set Identifier (SSID)-to-VLAN mapping Yes Auto-channel selection Yes Spanning tree Yes Load balancing Yes IPv6 Yes ●  IPv6 host support ●  IPv6 RADIUS, syslog, and Network Time Protocol (NTP) Layer 2 802.1Q-based VLANS, 32 active VLANS plus 1 management VLAN Security W-Fi Protected Access (WPA) and WPA2 Yes, including enterprise authentication Access control Yes, management access control list (ACL) plus MAC ACL Secure management Secure HTTP (HTTPS) SSID broadcast Yes Rogue access point detection Yes Mounting and Physical Security Multiple mounting options Mounting bracket included for easy ceiling or wall mounting Physical security lock Kensington lock slot Quality of Service QoS Wi-Fi Multimedia and Traffic Specification (WMM TSPEC) and client QoS Performance Wireless throughput Up to 2.8-Gbps data rate (real-world throughput varies) Recommended user support Up to 200 connective users; 50 active users per radio Multiple Access Point Management Single Point Setup Yes Number of access points per cluster 16 Active clients per cluster 960 Configuration Web user interface Built-in web user interface for easy browser-based configuration (HTTP and HTTPS) Management Management protocols Web browser, Simple Network Management Protocol (SNMP) v3, and Bonjour Remote management Yes Event logging Local, remote syslog, and email alerts Network diagnostics Logging and packet capture Web firmware upgrade Firmware upgradable through web browser; imported or exported configuration file Dynamic Host Configuration Protocol (DHCP) DHCP client IPv6 host Yes HTTP redirect Yes Wireless Frequency Dual concurrent radios (2.4 and 5 GHz) Radio and modulation type Dual radio, orthogonal frequency division multiplexing (OFDM) IEEE 802.11a/n: OFDM (BPSK/QPSK/16QAM/64QAM/256QAM) IEEE 802.11ac: OFDM (BPSK/QPSK/16QAM/64QAM/256QAM) WLAN 802.11n/ac 4 x 4 MU-MIMO at 5 GHz and 3 x 3 MIMO on 2.4 GHz 21 for 20-MHz bandwidth; 9 for 40-MHz bandwidth; 4 for 80-MHz bandwidth 11 for 20-MHz bandwidth; 7 for 40-MHz bandwidth 802.11 dynamic frequency selection (DFS) Data rates supported IEEE 802.11b: DSSS (1/2/5.5/11) IEEE 802.11g: OFDM (6/9/12/18/24/36/48/54) IEEE 802.11n: Refer to the entries for this standard later in this list) IEEE 802.11b: 12.94 MHz IEEE 802.11g: 24.49 MHz EEE 802.11n MCS0 (HT20): 27.44 MHz IEEE 802.11n MCS0 (HT40): 36.18 MHz IEEE 802.11b: 29.76 dBm IEEE 802.11g: 29.24 dBm IEEE 802.11n MCS0 (HT20): 29.25 dBm IEEE 802.11n MCS0 (HT40): 23.81 dBm Frequency band and operating channels Frequency Band Channel No. Frequency Channel No. Frequency 2400~2483.5MHz 1 2412 MHz 7 2442 MHz 2 2417 MHz 8 2447 MHz 3 2422 MHz 9 2452 MHz 4 2427 MHz 10 2457 MHz 5 2432 MHz 11 2462 MHz 6 2437 MHz - - Frequency Band Channel No. Frequency Channel No. 5150- to 5250-MHz Band 1 36 5180 MHz 44 38 5190 MHz 46 40 5200 MHz 48 42 5210 MHz - 52 5260 MHz 60 54 5270 MHz 62 5250- to 5350-MHz Band 2 56 5280 MHz 64 58 5290 MHz - 100 5500 MHz 112 102 5510 MHz 116 104 5520 MHz 132 5470- to 5725-MHz Band 3 106 5530 MHz 134 108 5540 MHz 136 110 5550 MHz 140 149 5745 MHz 157 151 5755 MHz 159 5725- to 5850-MHz Band 4 153 5765 MHz 161 155 5775 MHz 165 Transmitted output power Transmitted Output Power: 2.4 GHz ●  802.11b: 20.0 +/– 1.5 dBm @ CH6, all rates ●  802.11g: 20.0 +/– 1.5 dBm@ CH6, 6 Mbps ●  802.11g: 17.0 +/– 1.5 dBm@ CH6, 54 Mbps ●  802.11n(HT20): 20.0 +/– 1.5 dBm@ CH6, MCS0 ●  802.11n(HT20): 17.0 +/– 1.5 dBm@ CH6, MCS7 ●  802.11n(HT40): 16.0 +/– 1.5 dBm@ CH6, MCS7 5-GHz UNII-1 (5150~5250 MHz) ●  802.11a: 22.0 +/– 2 dBm @ 6 Mbps ●  802.11a: 20.0 +/– 2 dBm @ 54 Mbps ●  802.11ac(VHT20): 22.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT20): 14.0 +/– 2 dBm @ MCS8 ●  802.11ac(VHT40): 21.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT40): 14.0 +/– 2 dBm @ MCS9 ●  802.11ac(VHT80): 20.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT80): 14.0 +/– 2 dBm @ MCS9 5-GHz UNII-2 (5250–5350 MHz)/UNII-2 Extended (5470–5725 MHz) ●  802.11a: 22.0 +/– 2 dBm @ 6 Mbps ●  802.11a: 20.0 +/– 2 dBm @ 54 Mbps ●  802.11ac(VHT20): 22.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT20): 14.0 +/– 2 dBm @ MCS8 ●  802.11ac(VHT40): 21.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT40): 14.0 +/– 2 dBm @ MCS9 ●  802.11ac(VHT80): 20.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT80): 14.0 +/– 2 dBm @ MCS9 5GHz UNII-3 (5725~5850MHz) ●  802.11a: 22.0 +/– 2 dBm @ 6 Mbps ●  802.11a: 20.0 +/– 12 dBm @ 54 Mbps ●  802.11ac(VHT20): 22.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT20): 14.0 +/– 2 dBm @ MCS8 ●  802.11ac(VHT40): 21.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT40): 14.0 +/– 2 dBm @ MCS9 ●  802.11ac(VHT80): 20.0 +/– 2 dBm @ MCS0 ●  802.11ac(VHT80): 14.0 +/– 2 dBm @ MCS9 Wireless isolation Wireless isolation between clients External antennas None Internal antennas 4 Internal fixed PIFA antenna Antenna gain in dBi 3.61 dBi @2.4 GHz; 6.23 dBi @5 GHz Receiver sensitivity 2.4 GHz ●  802.11b: –86 dBm @ 11Mbps ●  802.11g: –73 dBm @ 54 Mbps ●  802.11n(HT20): –71 dBm @ MCS7 ●  802.11n(HT40): –67 dBm @ MCS7 5GHz ●  802.11a: –90 dBm @ 6 Mbps ●  802.11a: –74 dBm @ 54 Mbps ●  802.11ac(VHT20): –66 dBm @ MCS8 ●  802.11ac(VHT40): –62 dBm @ MCS9 ●  802.11ac(VHT80): –58 dBm @ MCS9 Wireless distribution system (WDS) Yes Fast roaming Yes Multiple SSIDs 16 per radio Wireless VLAN map Yes WLAN security Yes Wi-Fi Multimedia (WMM) Yes, with unscheduled automatic power save Operating Modes Access point Access point mode, Wireless Domain Services (WDS) bridging, and Workgroup Bridge mode Environmental Power options IEEE 802.3at/af Ethernet switch Cisco power injector: SB-PWR-INJ2-xx Cisco power adapter: SB-PWR-48v-xx Peak power: 18 watts Compliance Safety: ●  UL 60950-1 ●  CAN/CSA-C22.2 No. 60950-1 ●  IEC 60950-1 ●  EN 60950-1 Radio approvals: ●  FCC Part 15.247, 15.407 ●  RSS-210 (Canada) ●  EN 300.328, EN 301.893 (Europe) ●  AS/NZS 4268.2003 (Australia and New Zealand) EMI and susceptibility (Class B): ●  FCC Part 15.107 and 15.109 ●  ICES-003 (Canada) ●  EN 301.489-1 and -17 (Europe) Operating temperature 32 to 104°F) (0 to 40°C) Storage temperature –4 to 158°F (–20 to 70°C) Operating humidity 10 to 85% noncondensing Storage humidity 5 to 90% noncondensing System memory 256-MB RAM 128-MB flash

Enjoy the benefits of Wireless-N300 (802.11n) in your home ideal for surfing the web, emailing and printing wirelessly Connect your computers, wireless printers, smartphones, and other wireless devices at up to 300 Mbps transfer speed Enjoy broad wireless coverage provided by MIMO antenna technology Use four Fast Ethernet (10/100 Mbps) ports to directly connect wired devices Keep your network protected with customizable security settings, including WPA/WPA2 Personal and SPI firewall protection Give visitors password-protected Internet access on a separate network? So your visitors have access to the Internet, but not your computers or data Set up your wireless network in three easy steps using included Cisco Connect software Use Parental Controls to block specific websites and restrict Internet access during certain hours

· Dual-band (2.4 GHz and 5 GHz) · 802.11ac wireless technology · Compatible with 802.11 a/b/g/n · Two (2)external non-detachable antennas

Branded used Concurrent dual-band (2.4 GHz and 5 GHz) 802.11ac wireless technology Compatible with 802.11 a/b/g/n The data rate of up to 300 Mbps for 2.4 GHz and up to 866 Mbps for 5 GHz Two (2) external non-detachable antennas

Mini 150M USB WiFi Wireless 802.11 n / g / b Adapter New Complies with IEEE 801.11n IEEE 802.11g, IEEE 802.11b standards Modes 1x1 / 1x2 STBC Support for Extended Range Legacy and High Throughput Modes 20MHz / 40MHz bandwidth Inverse data flow and frame aggregation Support for WEP 64/128, WPA, WPA2 Multiple BSSID support Provides high-speed USB 2.0 interface For Cisco CCX V1.0 V2.0 V3.0 Compliance Low power with advanced power management