Cat poe

Product Name:POE Injector / Splitter Data PIN:1/2,3/6 Power PIN:4/5+ & 7/8- Data in:Connects PC/HUB/Switch Dimensions:50mm*25mm*25mm Case of material:ABS 94V-0 Ethernet Data rate:10/100/1000 Mbp Ethernet Cable:TIA/EIA 568 Cat.5 Ethernet Cable Connector:RJ-45 Operating Temperature:0- 40 Degree Storage Temperature:-40-70 Degree Operating Humidity:10%to80% RH Storage Humidity:5%to90% RH

Description: Details iShopping.pk brings you the best price for D-Link 6-Port 10/100 Unmanaged PoE Switch (DES-F1006P-E) with express shipping all over Pakistan.   Details: Long-Distance Transmission with Surge Protection With a connectivity range of 250 meters, the DES-F1006P-E is ideal for surveillance deployments, and compatible with Cat.5e or Cat.6 copper cable, while 6kV surge protection helps this device withstand power fluctuations and lightning strikes.   Easy Deployment and PoE Convenience The DES-F1006P-E is a Plug-and-Play device that requires no configuration, so setup is simple and hassle-free. Easily connect multiple computers, share files, music, and video across your SOHO network, or even create a multiplayer gaming environment. 802.3x flow control on each port minimizes dropped packets when the port’s receiving buffer is full, giving a more reliable connection for all connected devices. The DES-F1006P-E also features four 10/100BASE-TX ports that support the IEEE 802.3af/at Power-over-Ethernet (PoE) protocol, supplying 15W each.   Diverse Operating Modes The DES-F1006P-E switch has three operating modes. The default mode has a transmission distance of 100 meters. VLAN mode prevents against DHCP deception, broadcast storms, and virus attacks. Extend mode supports an extra-long transmission distance of 250 meters at 10Mbps, and Quality-of-Service (QoS) mode customizes application priorities for uses such as Video.   Features: • 4 x 10/100 Mbps Fast Ethernet Ports •   2 x 10/100 Mbps Uplink Port •   Power-over-Ethernet (60W) •   Flow control for protection against data loss •   Maximum distance of 250m •   QoS Capabilities •   Surge protection (6kV) •   Operating Temperature: 0 to 40oC

Nanostation M5 5GHz 802.11a/n hi-power (27dBm) 2x2 MIMO airMAX TDMA PoE station. This is the ultimate 5Ghz wireless outdoor CPE with integrated 14dBi dual polarity antenna. Product Includes: • One (1) Nanostation M5 5.8GHz • One (1) Power Injector: 110-240VAC 24VDC 0.5A US-style plug.  • Mount and mounting strap (NanoBracket sold separately) Featuring a compact indoor/outdoor design and an interface, it is so intuitive even the most technically challenged can instantly become experts. But don't be fooled--it is as powerful as it is simple. NanoStation packs some phenomenal performance with a revolutionary design combining a high gain antenna system, advanced radio architecture and highly researched and developed firmware technology allowing throughput, stability and capacity performance rivaling even the highest-end WiMax networks The NanoStation M5 makes a perfect CPE device when pared with the Ubiquiti Rocket M5 and AirMax Sector or a Dish Antenna. We also recommend to upgrade your AirOS software to the latest version by visiting UBNT Software Downloads. This device can also be used for short LOS PtP links by placing one unit in Access Point WDS Mode and the other unit into Station WDS. NanoStation M5 Features: • Great Performance: 150+ Mbps real outdoor throughput and up to 15km+ range. Typical range is 2-4 miles from a LOS tower running airMAX sector antenna's and Rocket M5's.  • Next-Gen Antenna Design: 11dBi dual-polarity gain at 5GHz with optimized cross-polarity isolation in a compact form-factor. • Dual Ethernet Connectivity: A secondary Ethernet port with software enabled POE output for seamless IP Video integration. • Intelligent POE: Remote hardware reset circuitry of NanoStation M allows for device to be reset remotely from power supply location.  • 802.3af 48V Compliant - Easily becomes 802.3af 48V compliant through use of Ubiquiti Instant 802.3af adapter. The adapter sold separately (SKU#I8023AF-OD or I8023AF-ID)  • Easy Installation - Easily mountable to a pole/mast with mounting straps provided. In addition, the NanoStation M5 can be mounted and adjusted in any direction in a 90-degree angle through the use the NanoBracket. The NanoBracket is sold separately (SKU#MT-NANO U) NanoStation M5 Specifications: • Operating Frequency: 5170 - 5875 Mhz. NOTE: Only 5745-5825 Mhz is supported in the USA and Canada. It is the operator's responsibility to follow local country regulations including operation within legal frequency channels, output power, and Dynamic Frequency Selection (DFS) requirements. • Processor Specs: Atheros MIPS 24KC, 400MHz • Wireless: 5Ghz Atheros, 27dBm Adjustable down to 8dBm, AES Encryption • Memory Information: 32MB SDRAM, 8MB Flash • Networking Interface: 2 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface, PoE Passthrough • Mount and mounting strap (Nanobracket is optional, sold separately) • Operating Temperature: -30C to +80C • Power Method: Passive PoE • Power Consumption: 8 Watts • Power Supply (included): Power Injector 110-240VAC 24VDC.5A North American-style plug • Size: 29.4 cm x 8 cm x 3cm, Weight:.4kg • Approvals: FCC Part 15.247, IC RS210, CE • RoHS Compliance: YES Technical Information and Support: Nanostation M5 Data Sheet Nanostation Quick Start Guide AirMax CPE Quick Start Guide

Description: Details iShopping.pk brings you the best price for D-Link 16-Port Gigabit Managed Long Range PoE+ Surveillance Switch (DGS-F1210-18PS-E) with express shipping all over Pakistan.   Details: • Supports 16 Port Switch with 10/100/1000Mbps and 2 SFP Ports enables you to connect Power over Ethernet (PoE) devices. •   16 10/100/1000 Mbps gigabit ethernet ports •   2 SFP port •   150watts available PoE •   Flow control for protection against data loss •   The maximum distance of 250m •   Light protection (6kV) •   Operating Temperature: 0 to 40 deg C (32 to 104 deg F)   High Transmission distance With high distance connectivity, ideal for surveillance solution. Can be used with cat5e or cat6 cable.The DGS-F1018P-E features 16 ports 10/100BASE-TX ports that support the IEEE 802.3af/at PoE protocol. With a total power budget of 120W.   Plug & Play Installation The DGS-F1018P-E is a Plug-and-Play device that requires no configuration, so setup is simple and hassle-free, and you can easily connect multiple computers, share files, music, and video across your home or small office network, or even create a multiplayer gaming environment. 802.3x flow control on each port minimizes dropped packets when the port’s receiving buffer is full, giving you a more reliable connection for all of your connected devices.   Different Switch working mode • The DGS-F1018P-E switch works in 4 operating modes using the DIP switch •   VLAN: Isolating ports 1-16 from each other can effectively suppress network storms and improve network performance •   EXTEND: Supports 250meters long-distance power supply (recommended cat 5 or above) •   PoE: Automatic detection power of port, power off and restart the device if find PD device crash •   QoS: Prioritize the identified video data to make video transmission smoother

• Great Performance: 150+ Mbps real outdoor throughput and up to 15km+ range. Typical range is 2-4 miles from a LOS tower running airMAX sector antenna's and Rocket M2's.  • Next-Gen Antenna Design: 11dBi dual-polarity gain with optimized cross-polarity isolation in a compact form-factor. • Dual Ethernet Connectivity: A secondary Ethernet port with software enabled POE output for seamless IP Video integration. • Intelligent POE: Remote hardware reset circuitry of NanoStation M allows for device to be reset remotely from power supply location.  • 802.3af 48V Compliant - Easily becomes 802.3af 48V compliant through use of Ubiquiti Instant 802.3af adapter. The adapter sold separately (SKU#I8023AF-OD or I8023AF-ID)  • Easy Installation - Easily mountable to a pole/mast with mounting straps provided. In addition, the NanoStation M2 can be mounted and adjusted in any direction in a 90 degree angle through the use the NanoBracket. The NanoBracket is sold separately (SKU# MT-NANO U) Product Includes • One (1) NanoStation 2.4GHz • One (1) Power Injector: 110-240VAC 24VDC 0.5A US-style plug • Mount and mounting strap (NanoBracket sold separately, SKU# MT-NANO U) Featuring a compact indoor/outdoor design and an interface, it is so intuitive even the most technically challenged can instantly become experts. But don't be fooled--it is as powerful as it is simple. NanoStation packs some phenomenal performance with a revolutionary design combining a high-gain antenna system, advanced radio architecture and highly researched and developed firmware technology allowing throughput, stability and capacity performance rivaling even the highest-end Wi-Max networks The NanoStation M2 makes a perfect CPE device when pared with the Ubiquiti Rocket M2 and airMAX Sector or a Dish Antenna. We also recommend to upgrade your AirOS software to the latest version by visiting UBNT Software Downloads. This device can also be used for short LOS PtP links by placing one unit in Access Point WDS Mode and the other unit into Station WDS. NSM2 Specifications • Processor Specs: Atheros MIPS 24KC, 400MHz • Frequency: 2.4Ghz Channels 1-11 (Channels 12-14 available in INTL version, contact sales@balticnetworks.com for ordering information) • Wireless: 2Ghz Atheros, 27dBm Adjustable down to 8dBm.,AES Encryption • Memory Information: 32MB SDRAM, 8MB Flash • Networking Interface: 2 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface, PoE Passthrough • Mount and mounting strap (NanoBracket is optional, sold separately) • Operating Temperature: -30C to +80C • Power Method: Passive PoE • Power Consumption: 8 Watts • Power supply included: Power Injector 110-240VAC 24VDC.5A US-style plug • Size: 29.4 cm x 8 cm x 3cm, Weight:.4kg • Approvals: FCC Part 15.247, IC RS210, CE • RoHS Compliance: YES Technical Information and Support: NanoStation M2 Data Sheet NanoStation Quick Start Guide airMAX CPE Quick Start Guide

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 128V Audio DSP Mixer with express shipping all over Pakistan.   The CONVERGE Pro 2 128V Audio DSP Mixer from ClearOne is a complete conferencing solution with 12 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in VoIP interface for 2 lines. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection. The mixer comes with built-in VoIP for VoIP conferencing. The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.   Features: Architecture • 12 mic/line inputs with AEC •  Built-in VoIP for 2 lines •  Built-in USB for PC-based conferencing Scalable Connectivity •  Standalone and daisy-chained system •  Stack up units up to 96 mic/line inputs •  Expansion bus C-Link with 64 channels •  P-Link bus to connect 6 peripherals Configuration & Management •  CONSOLE software •  Auto-discovery of devices •  Matrix View for entire system •  FlowView for visualized audio signal paths •  System monitoring and troubleshooting Audio Signal Processing •  Acoustic Echo Cancellation processing •  Distributed Echo Cancellation on every mic input •  Noise cancellation with Adaptive-Ambience •  Acoustic Intelligence with faster convergence •  DARE feedback elimination •  Microphone gating Flexible Control Options •  Dialer app for Windows, Mac, iOS, and Android •  Tabletop controller with a touch panel •  Wall controller with buttons •  Web-based controller Supports 3rd-party control modules   Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) VoIP Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation Audio: 5 lines (2 default + 3 lines through license), each line supporting 1+5 calls Sample Rate: 24 kHz Sample Bit Depth: 24-bit Codec: G.711 uLaw, G.711 ALaw, G.722 Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: Proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 48T Audio DSP Mixer with express shipping all over Pakistan.     The CONVERGE Pro 2 48T Audio DSP Mixer from ClearOne is a complete conferencing solution with 4 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in Telco interface for teleconferencing. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection.   The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.     Features: Architecture • 4 mic/line inputs with AEC •  Built-in Telco with ClearEffect processing •  Built-in USB for PC-based conferencing Scalable Connectivity •  Standalone and daisy-chained system •  Stack up units up to 96 mic/line inputs •  Expansion bus C-Link with 64 channels •  P-Link bus to connect 6 peripherals Configuration & Management •  CONSOLE software •  Auto-discovery of devices •  Matrix View for entire system •  FlowView for visualized audio signal paths •  System monitoring and troubleshooting Audio Signal Processing •  Acoustic Echo Cancellation processing •  Distributed Echo Cancellation on every mic input •  Noise cancellation with Adaptive-Ambience •  Acoustic Intelligence with faster convergence •  DARE feedback elimination •  Microphone gating Flexible Control Options •  Dialer app for Windows, Mac, iOS, and Android •  Tabletop controller with a touch panel •  Wall controller with buttons •  Web-based controller •  Supports 3rd-party control modules     Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Amplifier Output Speaker Output Port: Dual binding posts Audio: 2 x Channel Output Power: Maximum 10 W, 8 Ohms load Frequency Response: 20 Hz to 22 kHz @ +10 dBu, +/- 0.5 dBu THD + N: 20 Hz to 22 kHz @ +10 dBu, 1 W, Dynamic Range: 20 Hz to 22 kHz @ 20 dB, >102dB, with 20 kHz digital low pass filter Crosstalk: Channel to Channel, stimulus at 20 dBu, 10 W output to receptor 8⿦ load, 20 Hz to 22 kHz, Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 128T Audio DSP Mixer with express shipping all over Pakistan.   The CONVERGE Pro 2 128T Audio DSP Mixer from ClearOne is a complete conferencing solution with 12 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in Telco interface for teleconferencing. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection. The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.   Features: Architecture 12 mic/line inputs with AEC Built-in Telco with ClearEffect processing Built-in USB for PC-based conferencing Scalable Connectivity Standalone and daisy-chained system Stack up units up to 96 mic/line inputs Expansion bus C-Link with 64 channels P-Link bus to connect 6 peripherals Configuration & Management CONSOLE software Auto-discovery of devices Matrix View for entire system FlowView for visualized audio signal paths System monitoring and troubleshooting Audio Signal Processing Acoustic Echo Cancellation processing Distributed Echo Cancellation on every mic input Noise cancellation with Adaptive-Ambience Acoustic Intelligence with faster convergence DARE feedback elimination Microphone gating Flexible Control Options Dialer app for Windows, Mac, iOS, and Android Tabletop controller with a touch panel Wall controller with buttons Web-based controller Supports 3rd-party control modules   Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: Proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

Wireless Wi-Fi Network Setup For Sale BULLIT M2 HP WITH 24V POE 2Pcs=16000 TP-LINK OMINI ANTENNA 12DBI 1Pcs=2000 TP-LINK 5210 8Pcs=28000 TP-LINK 5110 2Pcs=4000 TP-LINK 3420 3G/4G ROUTER 2Pcs=5600 TP-LINK 7200ND 5Pcs=5000 PTCL WI-FI MODAME 2Pcs=3000 MIKROTIK RB 750 (4 Wan Load Balancer Configured) 1Pcs=6000 MIKROTIK RB 750 (Hotspot Server Configured) 1Pcs=6000 TP-LINK 8 PORT SWITCH 1Pcs=600 TP-LINK 8 PORT GEGEBYTE SWITCH 1Pcs=2000 BAYNET CAT 5 NETWORK CABLE 550' ft =4400 NETWORK CABLE 130' ft =650 PTCL EVO NITRO (NO! 75GB Fair Usage Policy) UNLIMTED DOWNLOADING 2100 PER MONTH 1Pcs=10000 HARD DISK SATA 160GB 1Pcs=1800 HARD DISK SATA 80GB 2Pcs=2000 APPLE WIRELESS KEYBORD+MOUSE SET 1Pcs=1000 DELL KEYBORD+MOUSE (2Pcs)=800 PANALE ANTENNA 21DBI 1Pcs=1200 PANALE ANTEENA 14DBI WITH 60FT CABLE 4Pcs=2400 OMINI ANTEENA 8DBI WITH 60FT CABLE 1Pcs=1000 NETWORK CABLE TESTER 1Pcs=400 MIKROTIK V 5.20 (Registered) HOTSPOT+WEB PROXY CACHE SERVER ON HP DC7600 =15000 ==================================== Samsung NF110-A01UK Processor: 1.66 GHz Intel Atom WINDOWS 8.1 Registered INSTTALD Hard Drive 250 GB Ram 2GB DDR3 Display: 10.1 inch Weight: 1.3kg Wi-Fi Bluetooth HD Webcam Battery Run Time 4 Hour GENIUN CHARGER WITH BAG=22000 ==================================== LAPTOP DELL E6500 CORE 2 DUO 2.40 2GB RAM 160GB HARD DISKDISPLY 17 INCH WINDOWS 8.1 Registered INSTTALD 1 HOUR BATTTREY TIMNG GENIUN CHARGER WITH BAG=20000 ===================================== G-LINK INTERNET SERVICE & IT TRADERS M.KASHIF MIRZA NTN NO: 4245919-2 Opps Al Barkat Gardan Mill Phatak Ismael Abad Sher Shah Road Multan 0345-7255789 (ZONG) 0300-3602755 (JAZZ)