Adapter 12v

Input Voltage: AC 100-240V (Worldwide AC Input) Input Frequency: 50-60Hz Output: DC 12V 1A Over load protection Auto-recovery Input Voltage Range * 100-240 VAC 50/60 HzOutput Voltage Nominal *12 VDCLoad Regulation * 0 - 1 AmpsInput Connector * USOutput plug * 5.5 x 2.5 mm connector,For Tp Link Router, Tenda router, ptcl dsl modem And CCTV Cam 12 volt 1 amp

OUTPUT DC VOLTAGE:DC 12V RATED CURRENT:DC 3A RATED POWER:36W Output adaptor jack size:Outer Diameter: 5.5mm. Inner Diameter: 2.1-2.5mm RIPPLE&NOISE:120mVp-p SETUP,RISE TIME:500ms,20ms/230VAC HOLD UP TIME(TYP.):30ms/230VAC 25ms/115VAC at full load INPUT VOLTAGE RANGE:AC 100-240V 50/60Hz FREQUENCY RANGE: 47-63HZ EFFICIENCY(Typ.):> 80% LEAKAGE CURRENT:1mA/240VAC ENVIRONMENT:WORKING TEMP -10~+60°C WORKING HUMIDITY: 20-90%RH non-condensing STORAGE TEMP,HUMIDITY:-20~+85°C,10-95%RH TEMP.COEFFICIENT:±0.03%°C(0-50°C) DIMENSION: 126X55X32 mm

A LITEON 12V-5A Power Adapter is an electrical system that provides electric power to a load. A 12V-5A Power Adapter LITEON’s primary purpose is to transform electric current from a source to the proper voltage, current, and frequency for powering a load. Power suppliers are often referred to as electric power converters as a result of this. Some power supplies are stand-alone devices, while others are integrated into the load appliances they support. Power supplies used in personal computers and consumer electronics products.

Can be use for: CCTV camera can be use for RGB lights strips Input Voltage: AC 100-240V currentInput Frequency: 50-60Hz Output 12 V DC 2A voltage conversion 220V To Dc 12V Power Supply Adapter 2A Quality: 100% Generic and High-Quality Adapter ChargerAlso Works with Rgb LED Strip LightLoad Protection Circuit

Output: DC 12V 1A / 1000mA Input: 100V~240V, 50~60Hz. Smart device. Convenient in use. 100% Brand new 100V - 240V AC to DC Power Adapter supply. Over-voltage protection,over-current protection,short-circuit protection.

Power supply voltage: 100 V - 240 V/50 - 60 Hz AC. Output voltage: 12 V DC. Output current: 5 A. Power: 60W Plug: 5.5 / 2.1 mm. Dimensions: 11 x 5.7 x 3.5 cm. Color: Black Cable length: 200 cm.

The external diameter of the plug is 5.5mm. The internal diameter of the plug is 2.1mm. Dimension: 38mm(L) x 14mm(W) x 13mm(H). The internal diameter of the plug is 2.1mm The external diameter of the plug is 5.5mm Dimension: 38mm(L) x 14mm(W) x 13mm(H).

AC/DC Adapter - DC 12V 1A Power Supply 1000mA, 100~240V AC to DC 12 Volt 1 Amp 0.6A Converter with 5.5 x 2.5mm 2.1mm Plug for Security Camera DVR NVR 12v adapter Compatible Devices: Cameras, Speakers 12v adapter Connector Type: Barrel Connector 12v adapter Wattage: 12 watts 12v adapter Input Voltage: 240 Volts 12v adapter Output Voltage: 12 Volts

DC 12V 1.5 Amp Adaptor for w1209DC12V 1.5 Amp Power Supply Adapter* Branded 100V-240V AC to DC Power Adapter supply* Input: 100V-240V, 50/60Hz* OutPut: DC 12V 1.5 Amp* Plug Specifications: EU Plug* The adapters Connector: inside positive (+). outside negative (-)* Cable length: about 80CM * Interface: 3.5mm*1.35mm

Short Description: Output: 12V Input: 12V Backup: 8 – 10 Hours Capacity: 10000mAh Charging Time: 4 – 5 Hours Feature: With Charging Adapter Feature: Two pin sizes Product Description: Gives your Router TP-Link, Tenda, and other routers a backup of up to 10 Hours. Router ups switch automatically on the battery backup within nanoseconds. Battery overcharge protection Heavy duty built-in li-ion battery Full automatic function Auto switch in the event of load shedding. Compact robust design. Plug and play What’s in the box: 1 x Router Ups Power Bank, 1 x Adapter Weight: 0.4

/n DC 12V Battery Solar 150W Water Heater Rod for Battery Solar Panel - 12V 150W Specifications: Voltage: 12v to 18V Wattage:150w Material of tube: aluminum  Size: 12 Inch Approx.  turns: 3- circle wire length: 1.5 ft Instructions: It works by solar panel or 12v battery or AC/DC adapter with corresponding rating. Power: 150 watts, 100 AH battery can back up for 5.5 hours. 30 minutes heating up 2 Liter water (original water tem. 25C). Usage: The heater is a small style appliance that can heat water and other liquids. It has some advantages, such as, carry easily, high quality and economical.  This water heater is convenient for housing use. Heating fatly and evenly and drink quickly.ideal for boiling water.                            Warning: 1.Don/'t leave a electric heater enable into the grid without supervision. 2.Don/'t include electric heater without immersion in water. 3.Don/'t put your hand into the liquid when the element is plugged in a wall outlet. 4.Don/'t keep electric heater in boiling water more than 3 minutes. 5.Don/'t place the water heater into soapy and alkaline solutions. /n /n /n/n /n /n

Description: Details iShopping.pk brings you the best price for TP-Link PoE Splitter Adapter (TL-POE10R) with 18 months official warranty shipping all over Pakistan.   Features: • IEEE 802.3af compliant •  Selectable power output •  Gigabit speed support •  Plug-and-Play, requires no configuration • Delivers power up to 100 meters (328.1 feet) • Optional 12V DC 9V DC or 5V DC power supply   Specification: HARDWARE Interface 2 10/100/1000Mbps RJ45 Port AUTO Negotiation/AUTO MDI/MDIX 1 POWER OUTPUT PORT Network Media 10BASE-T: UTP category 3, 4, 5 cable (Max 100m) EIA/TIA-568 100Ω STP (Max 100m) 100BASE-TX: UTP category 5, 5e cable (Max 100m) EIA/TIA-568 100Ω STP (Max 100m) 1000BASE-T: UTP category 5, 5e, 6 cable (Max 100m) Power Supply 12VDC 1A, 9VDC 1A, 5VDC 2A Basic Function Compatible With IEEE 802.3af Compliant PSEs Delivers Power Up To 100 Meters Optional 12VDC, 9VDC or 5VDC Power Output LED Indicator PWR Dimensions (W x D x H)                 3.2*2.1*0.9 in.(80.8*54*24 mm) SOFTWARE Basic Function Compatible With IEEE 802.3af Compliant PSEs Delivers Power Up To 100 Meters Optional 12VDC, 9VDC or 5VDC Power Supply OTHERS Certification FCC, CE, RoHS System Requirements Microsoft® Windows® 98SE, NT, 2000, XP, Vista™ or Windows 7, MAC® OS, NetWare®, UNIX® or Linux. Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing   What This Product Does The PoE Splitter TL-POE10R fully complies with IEEE 802.3af standard, and can work with all IEEE 802.3af PoE compliant PSE (Power Source Equipment) or PoE Supplier Adapter, such as TP-LINK's TL-SG3424P, TL-SF1008P or TL-POE150S, or other equivalent product, to deliver 12V, 9V or 5V Direct Current to where there are no power line or outlet, where you wish to fix device such as AP, IP Camera or IP Phone, etc. x

Temperature control mode: ON / OFF Temperature range:-50-110 ResolutionWhen temperature is 0.1 the resolution is -9.9~99.9, other temperature segment is 1 Control accuracy: 0.1 Hysteresis accuracy: 0.1 Refresh rate: 0.5S High temperature protection 0-110 Supply voltage: for DC 12V Static current: ≤ 35MA, attract current ≤ 65MA Output voltage: for DC 12V Output power: 10A relay Measurement input: NTC (10K 0.5%) Waterproof Sensor Environmental requirements: -10 ~ 60 Humidity 20% -85%

High Reliability Good quality High Efficiency & low energy consumption OUTPUT DC VOLTAGE:DC 12V RATED CURRENT:DC 5A RATED POWER:60W Output adaptor jack size:Outer Diameter: 5.5mm. Inner Diameter: 2.1-2.5mm RIPPLE&NOISE:120mVp-p SETUP,RISE TIME:500ms,20ms/230VAC HOLD UP TIME(TYP.):30ms/230VAC 25ms/115VAC at full load INPUT VOLTAGE RANGE:AC 100-240V 50/60Hz FREQUENCY RANGE: 47-63HZ EFFICIENCY(Typ.):> 80% LEAKAGE CURRENT:1mA/240VAC ENVIRONMENT:WORKING TEMP -10~+60°C WORKING HUMIDITY: 20-90%RH non-condensing STORAGE TEMP,HUMIDITY:-20~+85°C,10-95%RH TEMP.COEFFICIENT:±0.03%°C(0-50°C) DIMENSION: 126X55X32 mm

DC Voltage Output: 12V AC Voltage Input Support: 100V to 240V Max. Output Wattage: 18W Max DC Amp output Range: 1.5A (1500mA) Short Circuit Protection:Over Voltage Protection Over Amp Protection Coaxial Connector Size:Inner Diameter: 2.1mm Outer diatmeter: 5.5mm Polarity: Center Positive

Input Voltage: AC 100-240V (Worldwide AC Input) Input Frequency: 50-60Hz Output: DC 12V 2A Over load protection Auto-recovery

Input Voltage: AC 100-240V (Worldwide AC Input) Input Frequency: 50-60Hz Output: DC 12V 1A Over load protection Auto-recovery

Features: Passive PoE- means that input and output voltage are equal. Transforms Non PoE devices to PoE enabled. Supports 5V, 12V, 24V, 48V. Power supply required for power input - simply use the power supply (wall transformer) that is provided with the device you are trying to power. PoE injector and splitter kit with 5.5 * 2.1 mm DC jack / plug. Use with IP security camera, wireless access point and other devices. Can work up to30-40 metres/100-130ft (depending on the quality of the cable and the power draw of the device). Specifications: Color: Black, White(Optional) Material: Plastic Injector: RJ45 Male + Power In to RJ45 Female Splitter: RJ45 Female to RJ45 Male + Power Out Supports: 5V, 12V, 24V, 48V Power plug / jack: 2.1 * 5.5mm / 0.9 * 2.2in Power Pins: 4,5 + and 7,8 Length:18cm / 6.9in Transmission distance: 30-40 m / 100-130 ft Application: WLAN, routers, switches, internet telephony, security monitoring etc Product size: 17.5 * 1.9 * 1.8cm / 6.8 * 0.7 * 0.7in Product weight: 53g / 1.86oz Package size: 22.3 * 9 * 2.2cm / 8.8 * 3.5 * 0.9in Package weight: 54g / 1.9oz

package include:- 1pcs adapter 1 pcs 3 inch fan and W1209 Digital Thermostat Module and acrylic casing tactile switches allow for configuring various parameters including on & off trigger temperatures. DC fan functions best under a low pressure or low system impedance environment. Stabilized Output, low ripple & low interference Ideal for CCTV Cameras / Routers / Modems / Cordless Phones / Set Top Boxes / Wireless Devices / POS Machines etc.. Power off setting automatic memory (MCU built-in EEPROM storage unit).

Pive PoE means that int and outt voltage are.Transforms Non PoE devices to PoESupports 5V, 12V, 24V, 48V. required for power int - just use t (wall transformer) that is provided for t device you are trying to power. PoE injector and splitter kit with 5.5 x 2.1mm DC jack / plug. Use with IP security camera, wireless access point and otr devices. Can work up to30-40 meters / 100-130ft (depending on t quality of t cable and t lling power of t device). Specifications: Injector: RJ45 Male + Power In to RJ45 Female Splitter: RJ45 Female to RJ45 Male + Power Out Supports: 5V, 12V, 24V, 48V Power Pins: 4.5+ and 7.8 Length: 16cm / 6.9in Transssion distance: 30-40m / 100-130ft Application: WLAN, routers, switcs, internet telephony, security monitog etc Colour:Black Material:plastic Size:16x1.9x1.8cm Package Contents: 5 * PoE injector cable 5 * PoE splitter cable Only t above package content, otr products are not included.: Light and different displays may cause t color of t item in t picture a little different from t thing. T measuret allowed error is +/- 1-3cm.

SMART DEVICE. AUTO RECOVERY. CONVENIENT IN USE. RATED CURRENT:DC 8A. EFFICIENCY(Typ.):> 80%. OUTPUT DC VOLTAGE:DC 12V. FREQUENCY RANGE: 47-63HZ. LEAKAGE CURRENT:1mA/240VAC. TEMP.COEFFICIENT:±0.03%°C(0-50°C). ENVIRONMENT:WORKING TEMP -10~+60°C. INPUT VOLTAGE RANGE:AC 100-240V 50/60Hz. WORKING HUMIDITY: 20-90%RH non-condensing. STORAGE TEMP,HUMIDITY:-20~+85°C,10-95%RH.

Outdoor Waterproof High Efficiency and Reliability; Automatic Overload cut-off; Short circuit and Over Voltage protection; Low Interference & Noise

D-Link 1300Mbps Mngd 11AC Wave2 MU-MIMO Dual Bnd AP PoE Gigabit Port The DAP-2610 Wireless AC1300 Wave 2 Dual-Band PoE Access Point is designed to support small to medium business or enterprise environments by providing network administrators with secure and manageable dual-band wireless LAN options, and utilizing the cutting-edge speed of Wireless AC. Blazing Wireless Wave 2 AC Performance The DAP-2610 delivers reliable, high-speed wireless performance using the latest 802.11ac Wave 2 standard with maximum wireless signal rates of up to 400 Mbps (256-QAM) over the 2.4 GHz band, and 900 Mbps over the 5 GHz band1. This, coupled with support for the Wi-Fi Multimedia™ (WMM) Quality of Service (QoS) feature, makes it an ideal access point for audio, video, and voice applications. When enabled, QoS allows the DAP-2610 to automatically prioritize network traffic according to the level of interactive streaming, such as HD movies or VoIP. The QoS feature can be adjusted through the DAP-2610 web GUI using a drop-down menu to select customized priority rules. Additionally, the DAP-2610 supports load balancing to ensure maximum performance by limiting the maximum number of users per access point. Versatile Access Point Functionality The DAP-2610 allows network administrators to deploy a highly manageable and extremely robust simultaneous dual-band wireless network. The DAP-2610 can provide optimal wireless coverage over either the 2.4 GHz (802.11b, 802.11g, and 802.11n) or the 5 GHz (802.11a, 802.11n, and 802.11ac) bands. The DAP-2610 can be ceiling mounted, wall mounted, or placed on a desktop to meet any wireless demands. For advanced installations, the DAP-2610 has integrated 802.3af Power over Ethernet (PoE) support, allowing the device to be installed in areas where power outlets are not readily available. Security To help maintain a secure wireless network, the DAP-2610 supports both Personal and Enterprise versions of WPA and WPA2 (802.11i), with support for RADIUS server backend and a built-in internal RADIUS server allowing users to create their accounts within the device itself. This access point also includes MAC address filtering, wireless LAN segmentation, SSID broadcast disable, rogue AP detection, and wireless broadcast scheduling for further protection of your wireless network. The DAP-2610 includes support for up to eight VLANs per band, allowing multiple SSIDs to be implemented and further segment users on the network. It also includes a wireless client isolation mechanism, which limits direct client-to-client communication. Additionally, the DAP-2610 supports Network Access Protection (NAP), a feature of Windows Server® 2008, allowing network administrators to define multiple levels of network access based on individual client’s needs. Multiple Operation Modes To maximize total return on investment, the DAP-2610 can be configured to optimize network performance based on any one of its multiple operation modes: Access Point, Wireless Distribution System (WDS), a WDS with Access Point, and Wireless Client. With WDS support, network administrators can set up multiple DAP-2610s throughout a facility and configure them to bridge with one another, while also providing network access to individual clients. The DAP-2610 also features advanced features such as load balancing and redundancy, for fail-safe wireless connectivity. Network Management Network administrators have multiple options for managing the DAP-2610, including Web (HTTP), Secure Socket Layer (SSL), Secure Shell (SSH), and Telnet. For advanced network management, administrators can use the D-Link Central Wi-Fi Manager to configure and manage multiple access points from a single location. In addition, the D-Link Central Wi-Fi Manager provides network administrators with the means of conducting regular maintenance checks remotely, eliminating the need for sending out personnel to physically verify proper operation. The DAP-2610 also has a wireless scheduling feature, turning off wireless functionality when it is not needed to save power. With simultaneous dual-band functionality, PoE support, extensive manageability, versatile operation modes, and solid security enhancements, the DAP-2610 provides small to medium business and enterprise environments with a business-class solution for deploying a wireless network. Techinical Specification Device Interfaces •1 IEEE 802.11a/b/g/n/ac Wave2 wireless              •1 Gigabit LAN (supports PoE) Standards  • IEEE 802.11a/b/g/n/ac                                                                 • IEEE 802.3u/ab                                                                                                                                                                                                         • IEEE 802.3az Energy Efficient Ethernet (EEE)                         • IEEE 802.3af Power over Ethernet Antennas  • 2  internal dual-band   3dBi omni antennas OperatingFrequency • 2.4 GHz band: 2.4 to 2.4835 GHz                                     • 5 GHz band:5.15 to 5.35 GHz, 5.47 to 5.85 GHz Maximum Output Power • 20dBm for 2.4 GHz                                                            • 20 dBm for 5 GHz Data Signal Rate • 2.4 GHz                                                                            • 5 GHz                         • Up to 400 Mbps                                                              • Up to 867 Mbp Functionality Security • WPA - Personal                                                                    • SSID broadcast disable • WPA - Enterprise                                                                  • MAC address access control • WPA2 - Personal                                                                  • Network Access Protection (NAP) • WPA2 - Enterprise                                                                • Internal RADIUS server • WEP 64 / 128 - bit encryption Network Management • Telnet                                                                                • Traffi ccontrol • Secure Telnet (SSH)                                                      • SNMP v1 / v2c / v3 • Web (HTTP)                                                                     • D-Link Central Wi-Fi Manager • Secure Socket Layer (SSL)                                           • AP Array LEDs • Power / status Physical Dimensions • 170 x 170 x 28mm (6.69 x 6.69 x 1.1 inches) Weight • 314g (0.69 lbs) without mounting base                                       • 370.6g (0.82 lbs) with mounting base Power Supply • External power adapter: 12V/1A                                                    • IEEE 802.3 af PoE Maximum Power Consumption • 12W Temperature • Operating: 0 to 40°C (32 to104°F)                                                 • Storage: -20 to 65°C (-4 to149°F) Humidity • Operating:10% to 90% non-condensing                                     • Storage: 5% to 95% non-condensing Meantime Between Failure (MTBF) • > 30,000 hours Certifications • FCC                                                                                  • UL • IC                                                                                      • Wi-Fi® Certified • CE4

1 meter long cable 220 v input 12 V 1 amp outputA+ Quality 100% Generic New and High-Quality Compatible Replacement Adapter Charger Input Voltage: AC 100-240V (Worldwide AC Input) Input Frequency: 50-60Hz Output: 12V Industry Quality: Over Voltage Protection, Over Heat Protection All adapters have been fully tested: Strict Aging Test Strict Material Test Over Voltage Test Over Temperature Test Safety Test 100% Generic New and High-Quality Compatible Replacement Adapter Charger Input Voltage: AC 100-240V (Worldwide AC Input) Input Frequency: 50-60Hz Output: 12V 100% Generic New and High-Quality Compatible Replacement Adapter Charger Input Voltage: AC 100-240V (Worldwide AC Input) Input Frequency: 50-60Hz Output: 12V Industry Quality: Over Voltage Protection, Over Heat Protection All adapters have been fully tested: Strict Aging Test Strict Material Test Over Voltage Test Over Temperature Test Safety Test 100% Generic New and High-Quality Compatible Replacement Adapter Charger Input Voltage: AC 100-240V (Worldwide AC Input) Input Frequency: 50-60Hz Output: 12V

1st 1a/ 1.5a/ 2a power bank ups only 4 hours backup 2nd 1a/ 1.5a/ 2a power bank ups 6 hours puls backup 3rd 1a/ 1.5a/ 2a power bank ups 6 to 7 hours backup and with 12v 1.5 Adapter 4rth power bank ups 6 hours puls backup or battery indcator disply and with 12v 1.5 Adapter New Arrival Fiber Router UPS Power bank Power Bank for routers 12V 6 Hrs + backup time original With both thick and thin cables Provide same as showen in picture Compatible With PTCL, TP Link, Tenda, D Link, huwaei and Other Routers.

Branded original DC 12V 3A Power Adapter, AC 100-240V to DC 12V Transformers, Switching Power Supply for LCD Monitor, All Wifi Router Wireless Router, CCTV Cameras 2.1mm X 5.5mm US Plug 12v 3Amp Power Adapter; Output Current: 3A

W1209 Temprature controller with casing Temperature control mode: ON / OFF Temperature range:-50-110 ResolutionWhen temperature is 0.1 the resolution is -9.9~99.9, other temperature segment is 1 Control accuracy: 0.1 Hysteresis accuracy: 0.1 Refresh rate: 0.5S High temperature protection 0-110 Supply voltage: for DC 12V Static current: ≤ 35MA, attract current ≤ 65MA Output voltage: for DC 12V Output power: 10A relay Measurement input: NTC (10K 0.5%) Waterproof Sensor Environmental requirements: -10 ~ 60 Humidity 20% -85% Digital Led Thermostat Temperature Control DC 12V Adapter Thermometer Thermo Controller Switch Module + NTC Sensor W1209

Description: Details iShopping.pk brings you the best price for InFocus RealCam 2MP PTZ Camera (INA-PTZ-4) with express shipping all over Pakistan.   RealCam works with nearly all major platforms for video at up to 1080p (if allowed by that service). Use with Microsoft Skype for Business, Adobe Connect, Citrix GoToMeeting, LifeSize ClearSea, Avistar C3, Cisco Jabber, Skype, Polycom Real Presence Desktop, Radvision Scopia Desktop, and Google Hangout. RealCam also works with InFocus Mondopad and ConX Video Meeting software. Quiet pan/tilt action is ideal for capturing extensive areas. Access the precise settings you use most with 255 position presets for pan, tilt, and zoom, focus position, exposure mode, and white balance mode. Features a full function USB interface, with USB 3.0 and USB 2.0 compatibility, support audio and support UVC protocol. Control it with or USB UVC compatibility.   Features: • Full 1080p HD resolution • Pan, tilt and zoom using the included remote control • 72.5-degree wide-angle lens • USB 3.0 ultra-high speed interface • 12x optical zoom and 32x digital zoom • Use any PC with any software or OS via USB • Pan angle of -170° to +170° • Tilt angle of -30° to +30° • Power adapter required (not supplied) outside North America   Specifications: Accessories Included Power cord, USB cable, serial cable, remote Audio Input 1-ch: 3.5mm Audio Interface, Line In Backlight Compensation Supported Color System YUV 4:2:2 / H.264 / MJPEG Compatible Platforms (up to 1080p if allowed by service) Skype for Business, Adobe Connect, Citrix GoToMeeting, LifeSize ClearSea, Avistar C3, Cisco Jabber, Skype, Polycom Real Presence Desktop, Radvision Scopia Desktop, Google Hangout, InFocus Mondopad, ConX Video Meeting Control Input/Output 1xRS-232 IN: 8pin Min DIN, Max Distance: 30m, Protocol: VISCA/Pelco-D/Pelco-P 1xRS-232 OUT: 8pin Min DIN, Max Distance: 30m, Protocol: VISCA network use only Current Consumption 1.0A (Max) Digital Noise Reduction 2D&3D Digital Noise Reduction H & V Flip Supported Horizontal Angle of View 72.5° to 6.9° Horizontal Rotation Range (Pan)                                                                                                                                                                         ±170° (max. speed 100°/sec.) Image Freeze Supported Input Voltage DC 12V Lens 12x, f3.5mm ~ 42.3mm, F1.8 ~ F2.8 Minimal Illumination 0.05 Lux @ (F1.8, AGC ON) Operating System Windows 7, Windows 8, Windows 10, Mac OS X Operating Temperature F(C) -10°C ~ 40°C Power Connector JEITA type (DC IN 12V) Power consumption 12 W (Max) Preset Accuracy 0.1° Presets (number) 255 Product Dimensions 5 x 4.6 x 6.1 in. / 128.5 x 118 x 156.2 mm Regulatory Mariks Camera: FCC, CE, IC / Power Supply: CB, UL, CCC Scanning Mode Progressive Sensor 1/2.7”, CMOS, Effective Pixel: 2.07M Shipping Dimensions 9.8 x 9.8 x 10.2 in. / 250 x 250 x 260 mm Shutter 1/30s ~ 1/10000s Storage Temperature -40°C ~ 60°C USB 1xUSB3.0: Type B female jack USB Video Communication Protocol UVC 1.0 ~ UVC 1.5 UVC PTZ Supported Vertical Angle of View 44.8° to 3.9° Vertical Rotation Range (Tilt) ±30° (max. speed 69.9°/sec.) Video Format USB3.0: 1080p/60, 1080p/50, 1080p/30, 1080p/25, 720p/60, 720p/50, 720p/30, 720p/25 | USB2.0: 1080p/30, 1080p/25, 1080p/15, 1080p/10, 720p/30, 720p/25, 960x540p/30, 960x540p/25, 640x360p/60, 640x360p/50 Video S/N >/= 55dB Video System HD: 1080p/60, 1080p/50, 1080p/30, 1080p/25, 720p/60,720p/50, 720p/30, 720p/25 White Balance Auto, Indoor, Outdoor, One Push, Manual Zoom 12x optical, 32x digital Product Weight 2 lbs / 0.91 kglb. (0.91kg.)

Description: Details iShopping.pk brings you the best price for TP-Link Deco E3 Whole Home Mesh WiFi System (2 Pack) with express shipping all over Pakistan.   Specification: POWER AC adapter input Deco E4R: 100-240V~ 50/60Hz 0.3A Deco M3W: 100-240V~ 50/60Hz 0.3A AC adapter output Deco E4R: 12V ⎓ 1A HARDWARE FEATURES Ports Deco E4R: 2 10/100Mbps WAN/LAN Ports, 1 Power Port Button Deco E4R: 1 Reset button; Deco M3W: 1 Reset button Flash Deco E4R: 16 MB; Deco M3W: 8 MB SDRAM Deco E4R: 128 MB; Deco M3W: 128 MB Dimensions (W x D x H) Deco E4R: 7.5 × 3.6 × 3.6 in. (190.5 × 90.7 × 90.7 mm) Deco M3W (without plug): 4.9 × 2.7 × 1.4 in. (124 × 69 × 35 mm) Antenna Type Deco E4R: 2 internal dual-band antennas Deco M3W: 2 internal dual-band antennas WIRELESS FEATURES Wireless Standards IEEE 802.11 ac/n/a 5 GHz, IEEE 802.11 b/g/n 2.4 GHz Frequency 2.4 GHz and 5 GHz Signal Rate 867 Mbps at 5 GHz, 300 Mbps at 2.4 GHz Transmit Power FCC: Wireless Security WPA-PSK/WPA2-PSK SOFTWARE FEATURES Quality of Service WMM IPv6 Support WAN Type Dynamic IP/Static IP/PPPoE/L2TP/PPTP Management Local Management, Remote Management DHCP Server, Client Port Forwarding Support Firewall Security SPI Firewall Protocols Supports IPv4 and IPv6 Advanced Features Parental Controls Quality of Service (Deco E4R) Advanced Functions Monthly Reports Auto FW Update Expand Wi-Fi by adding more Deco units Guest Network 2.4 GHz guest network x 1 5 GHz guest network x 1 APP Easy setup via Deco App Working Modes Router, Access Point OTHERS Certification CE, FCC, IC, NCC, BSMI, IDA,RCM, JPA, JRF, VCCI, KC, RoHS Package Contents 1 router Deco E4R 1 wall-plug extender Deco M3W 1 RJ45 Ethernet cable 1 power adapter 1 quick installation guide Smartphone/Tablet Requirements iOS 9.0 or later Android 4.3 or later Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing

Description: Details iShopping.pk brings you the best price for Amped Wireless Titan-Ap High Power Dual Band AC1900 Wireless Access Point (APA1900) with 1 year international warranty and express shipping all over Pakistan.   The  TITAN-AP  adds long range Wi-Fi access to any existing network. Built with a 1GHz Dual-Core Processor, 14 high power amplifiers, and 4 high gain antennas, the  TITAN-AP  delivers superior Wi-Fi performance with ultimate coverage. It provides unmatched coverage, speed, and reliability for the busiest networks. Blazing-fast AC1900 Wi-Fi technology delivers up to 1900Mbps of Wi-Fi speed, making slow downloads and video buffering a thing of the past. With advanced 4 Antenna-Rx Technology, the  TITAN-AP  provides stable and strong connections for all of your devices. Plug and Play set up makes it easy to install. Upgrade your network with the  TITAN-AP  to go further, move faster and do more.   Specifications: Wireless Standard: 802.11a/b/g/n/ac Frequency Band: 2.4/5GHz Simultaneous Wireless Speed: 2.4GHz: 600Mbps 5GHz: 1300Mbps Amplifiers: 3 x 2.4GHz Amplifiers 3 x 5GHz Amplifiers 8 x Low Noise Amplifiers Processor: 1GHz Dual-Core Processor Memory: 128MB DDR3 Wireless Coverage Control: 15% - 100% Output Power (Individually adjustable for 2.4GHz and 5GHz networks) Antennas: 4 x Detachable High Gain 5dBi Dual Band Antennas Ports: 1 x RJ-45 10/100/1000M WAN Port (Network Port) 4 x RJ-45 10/100/1000M LAN Ports (Local Ports) 1 x USB 3.0 Port for USB Storage 1 x USB 2.0 Port for USB Storage Power Adapter Rating: Switching Adapter, Input: 100-240v, Output: 12v, 2.5A Mounting: Wall or Desktop Setup Requirements: A router or network switch with an available network (LAN) port Computer with wired (RJ-45) or wireless (802.11a/b/g/n or ac) adapter   Features: Ultimate Range & Wi-Fi Coverage Add long range Wi-Fi to your entire home or office with the  TITAN-AP. High Power amplifiers, low noise amplifiers and high gain antennas provide the ultimate Wi-Fi experience with a signal that easily penetrates walls and eliminates Wi-Fi dead spots.   14 Powerful Amplifiers & 4 Antennas The  TITAN-AP  is packed with the latest high power technology. With a total of 14 advanced amplifiers (3 x 2.4GHz amplifiers, 3 x 5GHz amplifiers, 4 x 2.4GHz signal reception amplifiers, 4 x 5GHz signal reception amplifiers) and 4 high gain 5dBi antennas, it delivers up to 800mW of output power. Providing the ultimate Wi-Fi performance and coverage, it is a leader in its class.   Stable Connections with 4 Antenna-Rx Technology The  TITAN-AP  features a unique combination of 3 transmitters with 4 receivers and 4 antennas per frequency to blanket a home or office with multiple Wi-Fi streams for unparalleled reliability, performance, and range.   Unmatched AC1900 Wi-Fi for Flawless HD & 4K Streaming Move faster than ever with unprecedented Wi-Fi speeds of up to 1900Mbps, that's 600Mbps on the 2.4GHz frequency and 1300Mbps on the 5GHz. Seamlessly stream HD and 4K content to multiple devices at once and eliminate gaming lag.   More Bandwidth for More Devices The  TITAN-AP  combines AC1900 Wi-Fi speeds with Amped Wireless' High Power Technology to provide multiple room, blazing-fast Wi-Fi coverage. The increased bandwidth of AC1900 and 4 Antenna-Rx Technology means your entire family can stream whatever they want, whenever they want, with no lag, all at the same time.   Parental Security Features & Guest Networks You're in control! Smart security features allow you to set the exact days and times that the networks are available, control the strength of your signal, and even block specific devices from accessing the network at all. Create up to 8 additional Wi-Fi networks for guests or conference rooms and enjoy secure connections with WPS push button configuration.   4 Gigabit Wired Ports Connect wired PCs, servers, printers, or A/V device, such as smart TVs, Blu-ray™ players, or gaming consoles at gigabit speeds with the four built-in wired network ports.   High Power Dual-Core Internet Processor Do more now with a powerful 1GHz Dual-Core Processor that is built to handle heavy traffic with ease, for the best networking experience.   Share Files Faster with USB 3.0 Includes two USB ports, one USB 3.0 and one USB 2.0. These ports are designed for attaching USB storage devices, such as an external hard drive or flash drive, to share at home or in the office with other networked computers.   Universal Compatibility The Access Point works with all brands and standards of single (2.4GHz) or dual band (2.4GHz/5GHz) wireless routers, powerlines or network switches.   Simple Plug & Play Setup Configuring the Access Point is easy. You simply plug the TITAN-AP into your router or network switch and the Access Point will automatically configure itself to your network. That's all it takes to get your High Power Wi-Fi Network up and running.