Ac ma shahud

​MS5900 MASTECH Determine the Motor Connection Non-Contact Rotary Field Indication Determine Rotary Field Direction Standalone direction indicator Wireless Specifications Operating Temperature: 0 °C ~ 40 °C Operating Altitude: 2000 m Pollution Degree: 2 Type of Protection: IP 40 Humidity 15 % to 80 % Electrical Safety: Meets DIN VDE 0411, IEC 61010 DIN, VDE 0413-7, EN 61557-7, IEC 61557-7 Maximum Operating Voltage (Ume): 400 V AC for all ranges Protection Level: CAT III, 600 V Battery: 6F22/9V (Not Included) Current Consomption: max 20 mA Nominal Voltage Rotary Direction: 1 to 400 V AC Nominal Voltage Phase Indication: 120 to 400 V AC Frequency Range (fn): 2 to 400 Hz Test Currents (In per phase): less than 3.5 mA Frequency Range (fn): 2 to 400 Hz Determine the Motor Connection Nominal Test Voltage (Ume): 1 to 400 V AC Nominal Test Currents (In per phase): less than 3.5 mA Shipping All Across Pakistan COMPANY: MATRIX ELECTRONICS CONTACT PERSON: FAIZAN MUNIR Mobile:03002785860 Email : sales@matrixelectronic.com Email : info@matrixelectronic.com www.matrixelectronic.com

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 128V Audio DSP Mixer with express shipping all over Pakistan.   The CONVERGE Pro 2 128V Audio DSP Mixer from ClearOne is a complete conferencing solution with 12 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in VoIP interface for 2 lines. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection. The mixer comes with built-in VoIP for VoIP conferencing. The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.   Features: Architecture • 12 mic/line inputs with AEC •  Built-in VoIP for 2 lines •  Built-in USB for PC-based conferencing Scalable Connectivity •  Standalone and daisy-chained system •  Stack up units up to 96 mic/line inputs •  Expansion bus C-Link with 64 channels •  P-Link bus to connect 6 peripherals Configuration & Management •  CONSOLE software •  Auto-discovery of devices •  Matrix View for entire system •  FlowView for visualized audio signal paths •  System monitoring and troubleshooting Audio Signal Processing •  Acoustic Echo Cancellation processing •  Distributed Echo Cancellation on every mic input •  Noise cancellation with Adaptive-Ambience •  Acoustic Intelligence with faster convergence •  DARE feedback elimination •  Microphone gating Flexible Control Options •  Dialer app for Windows, Mac, iOS, and Android •  Tabletop controller with a touch panel •  Wall controller with buttons •  Web-based controller Supports 3rd-party control modules   Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) VoIP Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation Audio: 5 lines (2 default + 3 lines through license), each line supporting 1+5 calls Sample Rate: 24 kHz Sample Bit Depth: 24-bit Codec: G.711 uLaw, G.711 ALaw, G.722 Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: Proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 48T Audio DSP Mixer with express shipping all over Pakistan.     The CONVERGE Pro 2 48T Audio DSP Mixer from ClearOne is a complete conferencing solution with 4 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in Telco interface for teleconferencing. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection.   The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.     Features: Architecture • 4 mic/line inputs with AEC •  Built-in Telco with ClearEffect processing •  Built-in USB for PC-based conferencing Scalable Connectivity •  Standalone and daisy-chained system •  Stack up units up to 96 mic/line inputs •  Expansion bus C-Link with 64 channels •  P-Link bus to connect 6 peripherals Configuration & Management •  CONSOLE software •  Auto-discovery of devices •  Matrix View for entire system •  FlowView for visualized audio signal paths •  System monitoring and troubleshooting Audio Signal Processing •  Acoustic Echo Cancellation processing •  Distributed Echo Cancellation on every mic input •  Noise cancellation with Adaptive-Ambience •  Acoustic Intelligence with faster convergence •  DARE feedback elimination •  Microphone gating Flexible Control Options •  Dialer app for Windows, Mac, iOS, and Android •  Tabletop controller with a touch panel •  Wall controller with buttons •  Web-based controller •  Supports 3rd-party control modules     Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Amplifier Output Speaker Output Port: Dual binding posts Audio: 2 x Channel Output Power: Maximum 10 W, 8 Ohms load Frequency Response: 20 Hz to 22 kHz @ +10 dBu, +/- 0.5 dBu THD + N: 20 Hz to 22 kHz @ +10 dBu, 1 W, Dynamic Range: 20 Hz to 22 kHz @ 20 dB, >102dB, with 20 kHz digital low pass filter Crosstalk: Channel to Channel, stimulus at 20 dBu, 10 W output to receptor 8⿦ load, 20 Hz to 22 kHz, Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 128T Audio DSP Mixer with express shipping all over Pakistan.   The CONVERGE Pro 2 128T Audio DSP Mixer from ClearOne is a complete conferencing solution with 12 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in Telco interface for teleconferencing. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection. The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.   Features: Architecture 12 mic/line inputs with AEC Built-in Telco with ClearEffect processing Built-in USB for PC-based conferencing Scalable Connectivity Standalone and daisy-chained system Stack up units up to 96 mic/line inputs Expansion bus C-Link with 64 channels P-Link bus to connect 6 peripherals Configuration & Management CONSOLE software Auto-discovery of devices Matrix View for entire system FlowView for visualized audio signal paths System monitoring and troubleshooting Audio Signal Processing Acoustic Echo Cancellation processing Distributed Echo Cancellation on every mic input Noise cancellation with Adaptive-Ambience Acoustic Intelligence with faster convergence DARE feedback elimination Microphone gating Flexible Control Options Dialer app for Windows, Mac, iOS, and Android Tabletop controller with a touch panel Wall controller with buttons Web-based controller Supports 3rd-party control modules   Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: Proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

Description: Details iShopping.pk brings you the best price for Toa Electronics Infrared Chairperson Station (TS-901) with express shipping all over Pakistan.   The  TS-901 chairperson station  is a remote microphone station used in the 900 series wireless conference system. The chairperson station features a priority switch that interrupts delegate stations whenever important messages need to get through. Optional long and short length gooseneck microphones are sold separately. Voting keys are featured to Start, End and Cast voting. Additional features include a built-in speaker, a headphone output with volume adjust and Talk button.   Features: Priority Control Switch The TS-901 features a priority switch that overrides the TS-902 delegate stations. This is a necessary feature for conference moderators and chairmen. Voting Keys Voting keys are featured to Start, End and Cast votes. Infrared Wireless Operation The 900 series conference systems feature infrared wireless operation for less bulk and easier configuration and setup. Headphone Output Built-in Headphone output with volume adjust is provided.   Specifications: Inputs Microphone Terminal: XLR-4-31 type for optional TS-903 or TS-904 gooseneck microphones Outputs Headphone: 1/8" (3.5mm) Mini Multi-Pin I/O Connectors Not Applicable Frequency Response Not Specified By Manufacturer Signal-to-Noise Ratio Not Specified By Manufacturer Distortion Not Specified By Manufacturer Power Requirements 7.4V DC (battery), 9V DC (AC Adapter)  Supplied from BP-900 battery or AD-0910 AC adapter Power Consumption 270 mA Dimensions 8.26 x 2.59 x 5.98" (210 x 65.9 x 152mm) (WxHxD) Weight 1.38 lb (630 g)

Description: Details iShopping.pk brings you the best price for Toa Electronics Infrared Chairperson Station (TS-801) with express shipping all over Pakistan.   The TOA 800 series conference system is a professional solution for wireless conference microphone operation in boardrooms, panel discussion groups, meeting halls, etc. The 800 series features secure infrared technology for wireless operation without bulky cables and wiring configurations. A functional system consists of a TS-800UL system controller, a TS-905 or TS-907 infrared transceiver and up to sixty-four TS-801 and TS-802 delegate / chairperson remote microphone stations. The TS-801 chairperson station is a remote microphone station used in the 800 series wireless conference system. The chairperson station features a priority switch that interrupts delegate stations whenever important messages need to get through. Optional long and short length gooseneck microphones are sold separately. Additional features include a built-in speaker, a headphone output with volume adjust and Talk button.   Features: Priority Control Switch The TS-801 features a priority switch that overrides the TS-802 delegate stations. This is a necessary feature for conference moderators and chairmen. Infrared Wireless Operation The 800 series conference systems feature infrared wireless operation for less bulk and easier configuration and setup. Headphone Output Built-in Headphone output with volume adjust is provided.   Specifications: Inputs Microphone Terminal: XLR-4-31 type  for optional TS-903 or TS-904 gooseneck microphones Outputs Headphone: 1/8" (3.5mm) Mini Multi-Pin I/O Connectors Not Applicable Frequency Response Not Specified By Manufacturer Signal-to-Noise Ratio Not Specified By Manufacturer Distortion Not Specified By Manufacturer Power Requirements 7.4V DC (battery), 9V DC (AC Adapter)  Supplied from BP-900 battery or AD-0910 AC adapter Power Consumption 270 mA Dimensions 8.26 x 2.59 x 5.98" (210 x 65.9 x 152mm) (WxHxD) Weight 1.38 lb (630 g)

Description: Details iShopping.pk brings you the best price for Toa Electronics Infrared Delegate Station (TS-902) with express shipping all over Pakistan.   The TOA 900 series conference system is a professional solution for wireless conference microphone operation in boardrooms, panel discussion groups, meeting halls, etc. The 900 series features secure infrared technology for wireless operation without bulky cables and wiring configurations. A functional system consists of a TS-900UL system controller, a TS-905 or TS-907 infrared transceiver and up to ninety-six TS-901 and TS-902 delegate / chairperson remote microphone stations. The TS-902 chairperson station is a remote microphone station used in the 900 series wireless conference system. The delegate station enables talkers to speak freely and remotely while monitoring the entire conversation. Optional long and short length gooseneck microphones are sold separately. Additional features include a built-in speaker, a headphone output with volume adjust and Talk button.   Features: Voting Keys Voting keys are featured to Start, End and Cast votes. Infrared Wireless Operation The 900 series conference systems feature infrared wireless operation for less bulk and easier configuration and setup. Headphone Output Built-in Headphone output with volume adjust is provided.   Specifications: Inputs Microphone Terminal: XLR-4-31 type  for optional TS-903 or TS-904 gooseneck microphones Outputs Headphone: 1/8" (3.5mm) Mini Multi-Pin I/O Connectors Not Applicable Frequency Response Not Specified By Manufacturer Signal-to-Noise Ratio Not Specified By Manufacturer Distortion Not Specified By Manufacturer Power Requirements 7.4V DC (battery), 9V DC (AC Adapter)  Supplied from BP-900 battery or AD-0910 AC adapter Power Consumption 270 mA Dimensions 8.26 x 2.59 x 5.98" (210 x 65.9 x 152mm) (WxHxD) Weight 1.38 lb (630 g)

Description: Details iShopping.pk brings you the best price for Toa Electronics Infrared Delegate Station (TS-802) with express shipping all over Pakistan.   The TOA 800 series conference system is a professional solution for wireless conference microphone operation in boardrooms, panel discussion groups, meeting halls, etc. The 800 series features secure infrared technology for wireless operation without bulky cables and wiring configurations. A functional system consists of a TS-800UL system controller, a TS-905 or TS-907 infrared transceiver and up to sixty-four TS-801 and TS-802 delegate / chairperson remote microphone stations. The TS-802 delegate station is a remote microphone station used in the 800 series wireless conference system. The delegate station enables talkers to speak freely and remotely while monitoring the entire conversation. Optional long and short length gooseneck microphones are sold separately. Additional features include a built-in speaker, a headphone output with volume adjust and Talk button.   Features: Infrared Wireless Operation The 800 series conference systems feature infrared wireless operation for less bulk and easier configuration and setup. Headphone Output Built-in Headphone output with volume adjust is provided.   Specifications: Inputs Microphone Terminal: XLR-4-31 type  for optional TS-903 or TS-904 gooseneck microphones Outputs Headphone: 1/8" (3.5mm) Mini Multi-Pin I/O Connectors Not Applicable Frequency Response Not Specified By Manufacturer Signal-to-Noise Ratio Not Specified By Manufacturer Distortion Not Specified By Manufacturer Power Requirements 7.4V DC (battery), 9V DC (AC Adapter)  Supplied from BP-900 battery or AD-0910 AC adapter Power Consumption 270 mA Dimensions 8.26 x 2.59 x 5.98" (210 x 65.9 x 152mm) (WxHxD) Weight 1.38 lb (630 g)

Description: Details iShopping.pk brings you the best price for D-Link Broadband Internet IP Phone (DPH-120SE/F2A) with express shipping all over Pakistan.   The DPH-120SE is a feature-rich telephone that provides voice communications using the same data network as your computer. This device combines the benefits of advanced Voice over IP technology with advanced communications features.   Specifications: Interfaces WAN Port: 10/100 BASE-T RJ-45 with PoE support for Internet connection LAN Port: 10/100 BASE-T RJ-45 for PC Headset: RJ9 Handset: RJ9 LEDs Power Display Large dot matrix LCD display Display Resolution: 128×48 pixels Keyboard 4 programmable soft keys Navigation keys Headset Volume adjustment (-/+) Redial Speaker phone Dial phone numbers (including * and #) CPU Broadcom SDRAM 16 MB Flash Memory 4 MB Power Plug AC power plug Phone features Vxworks OS Support SIP2.0 (RFC3261) SIP support 2 SIP servers, and backup SIP proxy servers Supports SIP UDP / TCP/ TLS SIP support SIP domain, SIP authentication (none, basic, MD5), DNS name of server, Peer to Peer / IP Call Audio Features HD voice: HD handset Codec: G.711A/u, G.7231 high/low, G.729AB, G.722, G.726-32 DTMF: In-band, RFC 2833 and SIP INFO Full duplex hands- free speaker phone with acoustic echo cancellation Voice Activity Detection (VAD) Comfort Noise Generation (CNG) Background noise suppression Adaptive jitter buffers Packet loss concealment SRTP mute Advanced Features Call forwarding (busy/no answer/always) Call transfer (unattended/attended/semi-attended) Call holding Call waiting 3 way call conference BLF list Join call Call pickup Call park Redial Call back Call completion Hot desking Auto redial Predial SIP messaging, MWI Flexible dial plan Barring function for outgoing calls Do not disturb Auto answer Caller ID display CLIR(rejects anonymous calls) CLIP(to make an anonymous call) Dial without registration Call logs with missed calls/incoming calls/outgoing calls. Each support 300 records Phonebook: 500 records Speed Dial (abbreviatedВ dialing) Hotline/Warm-line Call rejection Black List/ White List Intercom Password dial, DTMF hidden Action URL/ active URI Voice codec setting for each SIP line LDAP, XML phonebook Web dial Keypad lock, Emergency call Network/ Security Features Bridge mode and route PPPoE for xDSL 802.3af PoE VLANпј€Voice VLAN/Data VLANпј‰ 802.1X NAT (NAPT) NAT transverse:Support STUN client DHCP client on WAN/ DHCP server on LAN Main DNS and secondary DNS server DNS Relay SNTP Client Firewall and DMZ Web management access restricted VPN (L2TP) ping, Trace route, telnet Maintenance & Management WEB, telnet and LCD menu management Management with different account right Recover firmware and factory reset Upgrade firmware  via HTTP, HTTPS, FTP, TFTP DHCP option66 and custom option for auto provisioning Auto Provisioning to upgrade configuration file with AES encryption TR-069 and Syslog Dimensions 250 x 205 x 60 mm 191,8 x 155,7 x 179,2 mm Weight 0.84kg 0.84kg Power Supply DC 5 V/600 mA, power adapter Ethernet cable (PoE) 802.3af Power consumption IDLE: 2.5W IDLE: 1.2W to 1.9W Active: 2.8W Active: 2.4W to 3.5W Operation Temperature 0 to 40 °C Relative Humidity 10% to 65% non-condensing Certification FCC CCC CE RoHS