Above control features

Features Supports 50 time zones, 99 groups and 10 unlock combinations for access control Contact relay for door locks, exit button, alarm, bell, etc. Face and Fingerprint Reader Infra-red light source enables face detection and matching in dimly lit environment 6 user-defined function keys Contactless 1-second employee recognition Operates stand-alone or with any 26-bit Wiegand 3rd party access control panel Voice and visual indicates for acceptance and rejection of valid and invalid fingerprints/faces Multi-language support SDK available for OEM customers and software developersStorage Capacity: Face: 700 Fingerprint: 3000 templates (expandable to 10000) ID Card: 10,000 Transaction: 100,000 verification/Identification: Face Identification: ≤ 2 sec Face Verification: ≤ 1 sec Fingerprint Matching: 1:N to 3000 templates (expandable to 10000) Applications: Ports: Two (2) USB ports One (1) RJ-45 Ethernet port Multimodal Communications: RS232/485 TCP/IP Power: Input: DC12V --- 3A

Description: Details iShopping.pk brings you the best price for Bosch CCS-CU Control Unit For CCS 900 Ultro Conference System with express shipping all over Pakistan.   The Bosch CCS-CU Control Unit is the central power and control station for all CCS 900 Ultro Conference System contributor units, such as the chairman and delegate units. The control unit will supply power for up to 50 delegate / chairman units, and provide control for up to 150. The unit features a built in speaker and automated, programmable control over contributor units without the need for an operator. Its Digital Acoustic Feedback Suppression (DAFS) eliminates feedback howling and maintains clear, intelligible speech. Plenty of connections allow for interfacing within paging systems, amplifier systems, recording devices and more. The unit is feature rich, however its control section is straightforward and intuitive to operate in any conference setting.   Features: Discussion Control Without Operator The CU can be setup to operate standalone without the need for an operator. The following 5 modes can be chosen using a rotary control on the unit's top panel: • Open mode - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active • Open mode with auto-switch-off - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active. If the delegate does not speak for 30 seconds, microphones are automatically switched off • Override mode - delegates can override each other simply by activating their microphones. Only one microphone can be active at any one time. (Note: In override mode, delegates cannot override chairmen) • Chairman only mode - only chairmen can speak. Delegate microphones cannot be activated, even when a chairman is not speaking • Test mode - checks if system connections are correct. All microphone light rings and contribution unit LEDs light up to indicate that units are properly connected Supplies Power for up to 50 Contribution Units The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to connect 25 contribution units to each trunk output, with a maximum system cable length of 109.3 yards (100m). Provides Control for up to 150 Contribution Units Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150 contribution units. In this configuration a single CU acts as a master controller for the entire system. Built-in Monitor Loudspeaker The built-in monitor loudspeaker and headphone socket allow the conference to be monitored. Interfaces the System With External Equipment The following equipment can be interfaced to the CCS Ultro Discussion System through the CU: • External wired or wireless microphone - for guest speakers or audience participation. (Note: The external microphone is muted when the priority button on a chairman unit is pressed, and when the system is operating in 'chairman only' mode) • External PA system - for transmitting the proceedings to an audience in the same room or an adjacent room• Tape recorder - for external recording and playing back meetings and discussions • Audio equipment - for providing background music • Telephone coupler - to allow a remote delegate to participate via telephone• External audio processing - an insertion connector is provided Controls and Indicators (Top) • Mains on/off switch • Graphical display for status information (CCS‐CURD) • 5 soft buttons for configuration and control of thebuilt-in MP3 recorder (CCS‐CURD) • Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This control also determines the maximum level for the headphone outputs of the contribution units and the CU. • Microphone mode rotary switch, for setting the number of simultaneously active microphones, and selecting one of the four operation modes (plus test mode) • Power on LED Controls and Indicators (Back) • On/off switch for digital acoustic feedback suppression facility (CCS‐CUD, CCS‐CURD)• Microphone input gain adjustment • External recorder input gain adjustment• Insertion connector bypass switch   Specifications: Connections Top • 1x 0.14" (3.5mm) stereo headphone socket Back • 1x AC input • 2x 7-pole circular female connectors, trunk in/out loop through interconnection  • 1x 3-pole female XLR connector, microphone input (can be used as line input by included 50dB attenuator) • 1 x Cinch connector pair, line input/output  • 1 x Cinch connector pair, telephone input/output • 1 x Cinch connector pair, insertion input/output  • 2 x Cinch connector pairs (R/L channel), external recorder input/output • USB interface (CCS-CURD) Power Supply Mains voltage: 100 to 240 VAC ± 10% Current consumption: maximum 0.9A (100 VAC) to 0.3 A (240 VAC) DC supply to contribution units: 24V ± 1V (current limited) Volume mute (50dB att.) + 10 steps of 1.9dB Limiter 10dB above nominal level loudspeaker / headphone Gain Gain reduction due to number of open microphones (NOM): ÷ NOM ± 1 dB Total Harmonic Distortion Nominal input (85 dB SPL): Max. input (110 dB SPL): Sample Rate Recording: 32kHz Playback: 32, 44.1, 48kHz Bit Rate Recording: 64, 96, 128, 192, 256 KBit/sec Playback: any bitrate Mount Tabletop (portable or fixed) 19-inch rack flush mounting Material Top: polymer Bottom: painted metal Color Charcoal and Black Dimensions (HxWxD) 3.4 x 14.2 x 5.6" (84 x 361 x 143mm) Height of feet: 0.22" (5.5mm) Weight 3.3 lb (1.5kg)

Description: Details iShopping.pk brings you the best price for Bosch CCS-CUD Control Unit For CCS 900 Ultro Conference System with express shipping all over Pakistan.   The Bosch CCS-CUD Control Unit is the central power and control station for all CCS 900 Ultro Conference System contributor units, such as the chairman and delegate units. The control unit will supply power for up to 50 delegate / chairman units, and provide control for up to 150. The unit features a built in speaker and automated, programmable control over contributor units without the need for an operator. Its Digital Acoustic Feedback Suppression (DAFS) eliminates feedback howling and maintains clear, intelligible speech. Plenty of connections allow for interfacing within paging systems, amplifier systems, recording devices and more. The unit is feature rich, however its control section is straightforward and intuitive to operate in any conference setting.   Features: Digital Acoustic Feedback Suppression The digital acoustic feedback suppression facility automatically eliminates acoustic feedback (also known as 'howling' or 'Larsen effect'). This gives better speech intelligibility by allowing the speaker volume to be turned up as loud as required without any risk of feedback. Discussion Control Without Operator The CU can be setup to operate standalone without the need for an operator. The following 5 modes can be chosen using a rotary control on the unit's top panel: • Open mode - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active • Open mode with auto-switch-off - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active. If the delegate does not speak for 30 seconds, microphones are automatically switched off • Override mode - delegates can override each other simply by activating their microphones. Only one microphone can be active at any one time. (Note: In override mode, delegates cannot override chairmen) • Chairman only mode - only chairmen can speak. Delegate microphones cannot be activated, even when a chairman is not speaking • Test mode - checks if system connections are correct. All microphone light rings and contribution unit LEDs light up to indicate that units are properly connected Supplies Power for up to 50 Contribution Units The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to connect 25 contribution units to each trunk output, with a maximum system cable length of 109.3 yards (100m). Provides Control for up to 150 Contribution Units Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150 contribution units. In this configuration a single CU acts as a master controller for the entire system. Built-in Monitor Loudspeaker The built-in monitor loudspeaker and headphone socket allow the conference to be monitored. Interfaces the System With External Equipment The following equipment can be interfaced to the CCS Ultro Discussion System through the CU: • External wired or wireless microphone - for guest speakers or audience participation. (Note: The external microphone is muted when the priority button on a chairman unit is pressed, and when the system is operating in 'chairman only' mode) • External PA system - for transmitting the proceedings to an audience in the same room or an adjacent room• Tape recorder - for external recording and playing back meetings and discussions • Audio equipment - for providing background music • Telephone coupler - to allow a remote delegate to participate via telephone• External audio processing - an insertion connector is provided Controls and Indicators (Top) • Mains on/off switch • Graphical display for status information (CCS‐CURD) • 5 soft buttons for configuration and control of thebuilt-in MP3 recorder (CCS‐CURD) • Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This control also determines the maximum level for the headphone outputs of the contribution units and the CU. • Microphone mode rotary switch, for setting the number of simultaneously active microphones, and selecting one of the four operation modes (plus test mode) • Power on LED Controls and Indicators (Back) • On/off switch for digital acoustic feedback suppression facility (CCS‐CUD, CCS‐CURD)• Microphone input gain adjustment • External recorder input gain adjustment• Insertion connector bypass switch   Specifications: Connections Top • 1x 0.14" (3.5mm) stereo headphone socket Back • 1x AC input • 2x 7-pole circular female connectors, trunk in/out loop through interconnection  • 1x 3-pole female XLR connector, microphone input (can be used as line input by included 50dB attenuator) • 1 x Cinch connector pair, line input/output  • 1 x Cinch connector pair, telephone input/output • 1 x Cinch connector pair, insertion input/output  • 2 x Cinch connector pairs (R/L channel), external recorder input/output • USB interface (CCS-CURD) Power Supply Mains voltage: 100 to 240 VAC ± 10% Current consumption: maximum 0.9A (100 VAC) to 0.3 A (240 VAC) DC supply to contribution units: 24V ± 1V (current limited) Volume mute (50dB att.) + 10 steps of 1.9dB Limiter 10dB above nominal level loudspeaker / headphone Gain Gain reduction due to number of open microphones (NOM): ÷ NOM ± 1 dB Total Harmonic Distortion Nominal input (85 dB SPL): Max. input (110 dB SPL): Sample Rate Recording: 32kHz Playback: 32, 44.1, 48kHz Bit Rate Recording: 64, 96, 128, 192, 256 KBit/sec Playback: any bitrate Mount Tabletop (portable or fixed) 19-inch rack flush mounting Material Top: polymer Bottom: painted metal Color Charcoal and Black Dimensions (HxWxD) 3.4 x 14.2 x 5.6" (84 x 361 x 143mm) Height of feet: 0.22" (5.5mm) Weight 3.3 lb (1.5kg)

Description: Details iShopping.pk brings you the best price for Bosch CCS-CU Control Unit For CCS 900 Ultro Conference System U.S. Version with express shipping all over Pakistan.   The Bosch CCS-CU Control Unit is the central power and control station for all CCS 900 Ultro Conference System contributor units, such as the chairman and delegate units. The control unit will supply power for up to 50 delegate / chairman units, and provide control for up to 150. The unit features a built in speaker and automated, programmable control over contributor units without the need for an operator. Its Digital Acoustic Feedback Suppression (DAFS) eliminates feedback howling and maintains clear, intelligible speech. Plenty of connections allow for interfacing within paging systems, amplifier systems, recording devices and more. The unit is feature rich, however its control section is straightforward and intuitive to operate in any conference setting.   Features: Discussion Control Without Operator The CU can be setup to operate standalone without the need for an operator. The following 5 modes can be chosen using a rotary control on the unit's top panel: • Open mode - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active • Open mode with auto-switch-off - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active. If the delegate does not speak for 30 seconds, microphones are automatically switched off • Override mode - delegates can override each other simply by activating their microphones. Only one microphone can be active at any one time. (Note: In override mode, delegates cannot override chairmen) • Chairman only mode - only chairmen can speak. Delegate microphones cannot be activated, even when a chairman is not speaking • Test mode - checks if system connections are correct. All microphone light rings and contribution unit LEDs light up to indicate that units are properly connected Supplies Power for up to 50 Contribution Units The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to connect 25 contribution units to each trunk output, with a maximum system cable length of 109.3 yards (100m). Provides Control for up to 150 Contribution Units Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150 contribution units. In this configuration a single CU acts as a master controller for the entire system. Built-in Monitor Loudspeaker The built-in monitor loudspeaker and headphone socket allow the conference to be monitored. Interfaces the System With External Equipment The following equipment can be interfaced to the CCS Ultro Discussion System through the CU: • External wired or wireless microphone - for guest speakers or audience participation. (Note: The external microphone is muted when the priority button on a chairman unit is pressed, and when the system is operating in 'chairman only' mode) • External PA system - for transmitting the proceedings to an audience in the same room or an adjacent room • Tape recorder - for external recording and playing back meetings and discussions • Audio equipment - for providing background music • Telephone coupler - to allow a remote delegate to participate via telephone• External audio processing - an insertion connector is provided Controls and Indicators (Top) • Mains on/off switch • Graphical display for status information (CCS‐CURD) • 5 soft buttons for configuration and control of thebuilt-in MP3 recorder (CCS‐CURD) • Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This control also determines the maximum level for the headphone outputs of the contribution units and the CU. • Microphone mode rotary switch, for setting the number of simultaneously active microphones, and selecting one of the four operation modes (plus test mode) • Power on LED Controls and Indicators (Back) • On/off switch for digital acoustic feedback suppression facility (CCS‐CUD, CCS‐CURD)• Microphone input gain adjustment • External recorder input gain adjustment • Insertion connector bypass switch   Specifications: Connections Top • 1x 0.14" (3.5mm) stereo headphone socket Back • 1x AC input • 2x 7-pole circular female connectors, trunk in/out loop through interconnection  • 1x 3-pole female XLR connector, microphone input (can be used as line input by included 50dB attenuator) • 1 x Cinch connector pair, line input/output  • 1 x Cinch connector pair, telephone input/output • 1 x Cinch connector pair, insertion input/output  • 2 x Cinch connector pairs (R/L channel), external recorder input/output • USB interface (CCS-CURD) Power Supply Mains voltage: 100 to 240 VAC ± 10% Current consumption: maximum 0.9A (100 VAC) to 0.3 A (240 VAC) DC supply to contribution units: 24V ± 1V (current limited) Volume mute (50dB att.) + 10 steps of 1.9dB Limiter 10dB above nominal level loudspeaker / headphone Gain Gain reduction due to number of open microphones (NOM): ÷ NOM ± 1 dB Total Harmonic Distortion Nominal input (85 dB SPL): Max. input (110 dB SPL): Sample Rate Recording: 32kHz Playback: 32, 44.1, 48kHz Bit Rate Recording: 64, 96, 128, 192, 256 KBit/sec Playback: any bitrate Mount Tabletop (portable or fixed) 19-inch rack flush mounting Material Top: polymer Bottom: painted metal Color Charcoal and Black Dimensions (HxWxD) 3.4 x 14.2 x 5.6" (84 x 361 x 143mm) Height of feet: 0.22" (5.5mm) Weight 3.3 lb (1.5kg)

Description: Details iShopping.pk brings you the best price for Bosch CCS-CUD Control Unit For CCS 900 Ultro Conference System U.S. Version with express shipping all over Pakistan.   The Bosch CCS-CUD Control Unit is the central power and control station for all CCS 900 Ultro Conference System contributor units, such as the chairman and delegate units. The control unit will supply power for up to 50 delegate / chairman units, and provide control for up to 150. The unit features a built in speaker and automated, programmable control over contributor units without the need for an operator. Its Digital Acoustic Feedback Suppression (DAFS) eliminates feedback howling and maintains clear, intelligible speech. Plenty of connections allow for interfacing within paging systems, amplifier systems, recording devices and more. The unit is feature rich, however its control section is straightforward and intuitive to operate in any conference setting.   Features: Digital Acoustic Feedback Suppression The digital acoustic feedback suppression facility automatically eliminates acoustic feedback (also known as 'howling' or 'Larsen effect'). This gives better speech intelligibility by allowing the speaker volume to be turned up as loud as required without any risk of feedback. Discussion Control Without Operator The CU can be setup to operate standalone without the need for an operator. The following 5 modes can be chosen using a rotary control on the unit's top panel: • Open mode - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active • Open mode with auto-switch-off - allows selection of one to four microphones (excluded chairmen microphones) which can be simultaneously active. If the delegate does not speak for 30 seconds, microphones are automatically switched off • Override mode - delegates can override each other simply by activating their microphones. Only one microphone can be active at any one time. (Note: In override mode, delegates cannot override chairmen) • Chairman only mode - only chairmen can speak. Delegate microphones cannot be activated, even when a chairman is not speaking • Test mode - checks if system connections are correct. All microphone light rings and contribution unit LEDs light up to indicate that units are properly connected Supplies Power for up to 50 Contribution Units The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to connect 25 contribution units to each trunk output, with a maximum system cable length of 109.3 yards (100m). Provides Control for up to 150 Contribution Units Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150 contribution units. In this configuration a single CU acts as a master controller for the entire system. Built-in Monitor Loudspeaker The built-in monitor loudspeaker and headphone socket allow the conference to be monitored. Interfaces the System With External Equipment The following equipment can be interfaced to the CCS Ultro Discussion System through the CU: • External wired or wireless microphone - for guest speakers or audience participation. (Note: The external microphone is muted when the priority button on a chairman unit is pressed, and when the system is operating in 'chairman only' mode) • External PA system - for transmitting the proceedings to an audience in the same room or an adjacent room • Tape recorder - for external recording and playing back meetings and discussions • Audio equipment - for providing background music • Telephone coupler - to allow a remote delegate to participate via telephone• External audio processing - an insertion connector is provided Controls and Indicators (Top) • Mains on/off switch • Graphical display for status information (CCS‐CURD) • 5 soft buttons for configuration and control of thebuilt-in MP3 recorder (CCS‐CURD) • Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This control also determines the maximum level for the headphone outputs of the contribution units and the CU. • Microphone mode rotary switch, for setting the number of simultaneously active microphones, and selecting one of the four operation modes (plus test mode) • Power on LED Controls and Indicators (Back) • On/off switch for digital acoustic feedback suppression facility (CCS‐CUD, CCS‐CURD)• Microphone input gain adjustment • External recorder input gain adjustment • Insertion connector bypass switch   Specifications: Connections Top • 1x 0.14" (3.5mm) stereo headphone socket Back • 1x AC input • 2x 7-pole circular female connectors, trunk in/out loop through interconnection  • 1x 3-pole female XLR connector, microphone input (can be used as line input by included 50dB attenuator) • 1 x Cinch connector pair, line input/output  • 1 x Cinch connector pair, telephone input/output • 1 x Cinch connector pair, insertion input/output  • 2 x Cinch connector pairs (R/L channel), external recorder input/output • USB interface (CCS-CURD) Power Supply Mains voltage: 100 to 240 VAC ± 10% Current consumption: maximum 0.9A (100 VAC) to 0.3 A (240 VAC) DC supply to contribution units: 24V ± 1V (current limited) Volume mute (50dB att.) + 10 steps of 1.9dB Limiter 10dB above nominal level loudspeaker / headphone Gain Gain reduction due to number of open microphones (NOM): ÷ NOM ± 1 dB Total Harmonic Distortion Nominal input (85 dB SPL): Max. input (110 dB SPL): Sample Rate Recording: 32kHz Playback: 32, 44.1, 48kHz Bit Rate Recording: 64, 96, 128, 192, 256 KBit/sec Playback: any bitrate Mount Tabletop (portable or fixed) 19-inch rack flush mounting Material Top: polymer Bottom: painted metal Color Charcoal and Black Dimensions (HxWxD) 3.4 x 14.2 x 5.6" (84 x 361 x 143mm) Height of feet: 0.22" (5.5mm) Weight 3.3 lb (1.5kg)

Description: Details iShopping.pk brings you the best price for Bosch Digital Discussion For Control Unit (CCSD-CU) with express shipping all over Pakistan.   The Bosch CCSD-CU is the basic control unit for the Bosch CCS-1000D digital conference system. This control unit powers the discussion microphones (up to 80 in total), controls cameras (CCTV software included) and interfaces with external equipment such as a public address system. The front panel provides the neccessary controls but the system can also be controlled via a laptop or tablet. This includes the ability to activate or deactivate participant microphones, or changing the status of paticipants from 'waiting' to 'speaking'. Up to 6 HD cameras can be connected and controlled via the integral software, in order to relay the image of the person speaking onto a large screen.   Features: • Plug-and-play functionality for quick and easy connection of up to 80 Discussion Devices • Intuitive web browser control for advanced configuration and control   Specifications: Mains voltage 100 to 240 VAC ± 10% Current consumption Maximum 0.6 A (100 VAC) to 0.2 A (240 VAC) DC supply to Discussion Devices 24 V ± 1 V (current limited) Number of Discussion Devices per Control Unit Max. 40 devices per trunk connector Discussion Device loudspeakers volume control 15 steps of 1.5 dB (starting from -10.5 dB) Limit threshold level to unit 12 dB above nominal level Gain reduction due to number of open microphones (NOM) 1/SQRT (NOM) Sample rate 44.1 kHz Nominal input (85 dB SPL) Max. input (110 dB SPL) XLR nominal microphone input -56 dBV XLR maximum microphone input -26 dBV RCA nominal input -24 dBV (+/- 6 dB) RCA maximum input +6 dBV S/N > 94 dBA Frequency response 30 Hz to 20 kHz RCA nominal output -24 dBV (+6/- 24 dB) RCA maximum output +6 dBV S/N > 102 dBA Frequency response 30 Hz to 20 kHz Recording/ Playback (bit rate) 64, 96, 128, 256 Kbit/sec Recording/ Playback (sample frequency) 44.1 kHz Nominal output 72 dB SPL Frequency response 200 Hz to 12.5 kHz Gain range mute -10.5 to +12 SanDisk USB memory stick Formatted with FAT32 file system.Maximum size: 128 GB. Bite rate Internal memory hours, USB memory stick hours 16 GB 32 GB, 64 GB, 128 GB 64 8 hrs, 500, 1000, 2000, 4000 96 5 hrs, 350, 700, 1400, 2800 128 4 hrs, 250, 500, 1000, 2000 256 * 2 hrs, 125, 250, 500, 1000 Dimensions including feet (H x W x D) 45 x 440 x 200 mm(1.8 x 17.3 x 7.9 in)19” wide, 1 RU high Height of feet 5.5 mm (0.2 in) Mounting Tabletop19-inch rack Weight (CCSD-CU) Approx. 3.2 kg (7.1 lb) Weight (CCSD-CURD) Approx. 3.4 kg (7.5 lb) Material (top) Painted metal Material (base) Painted metal Color (top) Traffic black (RAL 9017) matt-gloss Color (base) Traffic black (RAL 9017) matt-gloss Rim Pearl light grey (RAL 9022) matt-gloss Operating temperature 5 ºC to +45 ºC (+41 ºF to +113 ºF) Storage temperature -40 ºC to +70 ºC (-40 ºF to +158 ºF) Relative humidity 5% to 98% non-condensing

Description: Details iShopping.pk brings you the best price for Bosch Control Unit With DAFS & Recorder (CCSD-CURD) with express shipping all over Pakistan.   Features: • Plug-and-play functionality for quick and easy connection of up to 80 Discussion Devices • Intuitive web browser interface control for advanced configuration and control • Built‑in MP3 recorder with internal memory and USB recording • Built‑in Digital Acoustic Feedback Suppression (DAFS) for ensuring superior speech intelligibility • On-board support for automatic HD camera control   Specifications: Supply voltage Adaptor 100 to 240 VAC, 50/60 Hz Current Consumption voltage Adaptor 1.9 A (100 VAC) to 1 A 240 (VAC) DC voltage Control Unit 24 V, 6.0 A Maximum number of Discussion Devices for Control Unit (without Extension Unit) 40 Discussion Devices per trunk 80 Discussion Device in total 24 V, Max 5.2 A (short-circuited protected) Discussion Device loudspeakers volume control 15 steps of 1.5 dB (starting from -10.5 dB) Limit threshold level to unit 12 dB above nominal level Gain reduction due to number of open microphones (NOM) 1/SQRT (NOM) Sample rate 44.1 kHz Frequency response 30 Hz to 20 kHz Ethernet speed 1 Gb/s Nominal input (85 dB SPL) Max. input (110 dB SPL) XLR nominal microphone input -56 dBV XLR maximum microphone input -26 dBV RCA nominal input -24 dBV (+/- 6 dB) RCA maximum input +6 dBV S/N > 93 dBA Frequency response 30 Hz to 20 kHz THD RCA nominal output -24 dBV (+6/- 24 dB) RCA maximum output +6 dBV S/N > 93 dBA Frequency response 30 Hz to 20 kHz THD Recording/ Playback (bit rate) 64, 96, 128, 256 Kbit/sec Recording/ Playback (sample frequency) 44.1 kHz Nominal output 72 dB SPL Frequency response 200 Hz to 16 kHz (acoustical) Gain range Mute -10.5 to +12 dB SanDisk USB memory stick Formatted with FAT32 file system. Maximum size: 128 GB. Bite rate Internal memory size/hours, USB memory stick size/hours 225 MB 16 GB, 32 GB, 64 GB, 128 GB 64 8 hrs, 500 hrs, 1000 hrs, 2000 hrs, 4000 hrs 96 5 hrs, 350 hrs, 700 hrs, 1400 hrs, 2800 hrs 128 4 hrs, 250 hrs, 500 hrs, 1000 hrs, 2000 hrs 256 * 2 hrs, 125 hrs, 250 hrs, 500 hrs, 1000 hrs Dimensions including feet (H x W x D) 45 x 440 x 200 mm(1.8 x 17.3 x 7.9 in) 19” wide, 1 RU high Height of feet 5.5 mm (0.2 in) Mounting Tabletop or 19 “ rack Material (top and base) Painted metal Color (top and base) Traffic black (RAL 9017) matt-gloss Rim front panel Pearl light grey (RAL 9022) matt-gloss Weight (CCSD‑CURD) Approx. 3.4 kg (7.5 lb) Operating temperature 5 ºC to +45 ºC (+41 ºF to +113 ºF) Storage and transport temperature -40 ºC to +70 ºC (-40 ºF to +158 ºF) Relative humidity 5% to 98% non-condensing

Description: Details iShopping.pk brings you the best price for Toa Electronics Central Control Mixer Unit (TS-770) with express shipping all over Pakistan.   The Toa TS-770 Central Control Unit is designed for use with the Toa TS-770 conference system. The TS-770 is the control unit for the TS-771 chairman station, TS-772 delegate station and TS-775 remote delegate interface. Up to 70 stations can be connected to one TS-770, and up to three TS-770 units can be chained for control of up to 210 stations. The compact, intuitive TS-770 provides a host of features that include microphone-off position switches that automatically switch off microphones after 20 or 40 seconds of silence. Three limiter settings adjust the level threshold and avoid distortion caused by loud talkers. The front panel features level control for microphone and line level signal and two jacks provide connections for an auxiliary microphone and line level device.   Features: Control of Up to 70 Stations Up to 70 stations can be connected to one TS-770, and up to three TS-770 units can be chained for control of up to 210 stations. Automatic Microphone-Off Function The compact, intuitive TS-770 provides a host of features that include microphone-off position switches that automatically switch off microphones after 20 or 40 seconds of silence. Three Position Limiter Three limiter settings adjust the level threshold and avoid distortion caused by loud talkers. Auxiliary Inputs The front panel features level control for microphone and line level signal and two jacks provide connections for an auxiliary microphone and line level device.   Specifications: Inputs Line - 8-pin Connector x2  EXT 1 / EXT 2 - RCA Phono x2 Equalizer In - 1/4" Phone  Aux Mic - 1/4" Phone Aux Line - 1/4" Phone Outputs EXT 1 / EXT 2 - RCA Phono x2  Rec Out - Stereo 1/4" Phone & 1/8" Mini Multi-Pin I/O Connectors No Frequency Response Not Specified By Manufacturer Signal-to-Noise Ratio Not Specified By Manufacturer Distortion Not Specified By Manufacturer Power Requirements AC Mains, 50/60Hz Power Consumption 60W Dimensions (WxHxD) 8.27 x 4.22 x 12.44" (210 x 107.1 x 316mm) Weight 8.82 lb (4 kg)

Remote Control For Computer Windows Media Player Model: HP OVU400307/00 Key Features Plug & Play, No Software Driver Required HP USB IR Receiver forVista Home Premium and Windows Vista Ultimate (Certified for Windows Vista),WIN7 Play Media Right from your Remote Control Manage your Music Collection Edit & View your Digital Photos and Videos Control your cursor without a mouse Plug & Play, No Software Driver Required Complete control over your listening and viewing pleasure, from anywhere in the room as far as 10-20 M away. Compatible Window Vista Window 7 Window XP What is with it 1 pcs HP MCE Receiver 1 pcs HP remote 1 pcs ir emitter wire Pickup & Delivery We can ship by cargo next day delivery. Please call for bank details, upon verifying payment we will ship via a cargo for next day traceable delivery. Delivery charges you will pay at your end. (Delivery Cost around Rs100-450 in case you are not in Lahore or you don't like to come to pick up the item). For more detail Call us 03455181377 03454797559

MA 300 Introduction: MA300 is an innovative biometric fingerprint reader for access control applications, offering unparalleled performance using an advanced algorithm for reliability, precision and excellent matching speed. The MA300 features the fastest commercial-based fingerprint matching algorithm and ZK high-performance, high-image quality optical fingerprint sensor. The device offers the flexibility to be installed standalone or with any third party panel that supports 26-bit Wiegand. The user can be enrolled by administrator card when the device works as a standalone access control. TCP/IP and RS485 are available that the device can be used in different network. TCP/IP communication makes sure the data transition between the device and the PC can be easily done within several seconds. MA300 can be used in tough environment because of the IP54 protection index and the wide range of operating temperature. Features ．1 touch a-second user recognition ．Fingerprint reader with durable and highly accurate ZK optical sensor ．Stores 1,500 templates, 10,000 cards and 30,000 transactions ．Reads Fingerprint and/or Card ．Optional integrated smart card reader ．Built-in Serial and Ethernet ports ．Tamper-proofs switch and alarm outputs ．Request-to-exit and alarm contacts ．Real-time 1-touch data export 3rd party hosted & non-hosted applications Specifications: Fingerprint Capacity 1500 templates ID card Capacity 10,000 Transaction Capacity 100,000 Hardware Platform ZEM710 Sensor ZK Optical Sensor Algorithm Version ZK Finger v10.0 Communication RS485, TCP/IP, USB-host Access Control Interface for 3rd party electric lock, door sensor, exit button, alarm Wiegand Signal Input & Output Stardard Access Control Function Time Zone, Group, Multi-identification, Duress mode, Anti-passback Optional Functions Mifare, external USB keypad Display N/A Power Supply 12V DC Operating Temperature -10 ℃- 60 ℃ Operating Humidity 10%-90% Index of Protection IP54

DESCRIPTION ANVIZ C5 pro Fingerprint & RFID Access Control proposed by by MSi (Minolta Systems International) . MSi Price - Rs:18500/- MSi Warranty - 15 Months MSi Software - Free CD MSi Delivery - Free Incity . MSi Key Features: C5 is a fingerprint & RFID access control system. It integrates color LCD, keypad, optical fingerprint sensor, card reader and access control components. Graphic user interface allows C5 to display all languages in the world. The device has a fashionable and elegant appearance combined with reliable quality. Optional Mifare card reader is specially designed for the existing card users and higher levels of security. Users can have great convenience to manage complicated custom-defined job codes or time attendance statuses. It supports time zone and group access control for high security level. . Features: 3" widescreen High Definition TFT display User friendly graphic interface New generate . Parameter: ltem Description Algorithm BioNANO Sensor Anviz Optical Fingerprint Scan Area 22mmx18mm LCD 3" Widescreen High Definition TFT Display Identification Time 0.5 Sec FRR 0.001% FAR 0.00001% Fingerprint Capacity 3000 Log Capacity 50000 Card Reader Module 125KHZ EM RFID, Optional 13.56MHZ Mifare Identification Mode FP, Card, ID+FP, ID+PW, PW+Card, FP+Card Scheduled Bell Yes Certificate FCC, CE, ROHS Door Sensor Yes Humidity 20% ~ 80% RH Web Server Yes Com Interface TCP/IP, USB Host, USB, RS232, RS485 Wiegand Support Wiegand 26 Input and Output, Support Anviz Wiegand Output . . MINOLTA SYSTEMS INTERNATIONAL (Office Solutions & Communications Services) Land Mark Plaza Jail Road Gulberg-V Lahore.

VF30 / VP30 Fingerprint / RFID Access Control VF30 (fingerprint) / VP30(RFID) are professional access control systems designed for small and medium interprises development of security. They integrate fingerprint identification, RFID, burglar alarm, time attendance and access control functions etc., with fashion and elegant appearance and reliable structure. VF Series have musical ring tones, powerful communication function suitable for data management in various environments. They come with a functional management software, with multiple language display, friendly user interface,and compatible with various types of database. also supports time zone and group access control for high security level. They are versatile, convenient and multi-functional. Products: Hardware: Anviz Professional Fingerprint+Card+PW Access Control VF30 Features: Compact Design, Fingerprint+Card, Infrared auto wakeup sensor, TCP/IP, Wiegand input & output, Direct lock control, Time zone access control, Doorbell output, Tamper alarm, Door sensor

Description: Details iShopping.pk brings you the best price for Shure Central Control Unit Conference System with express shipping all over Pakistan.   Central control unit for use with DDS 5900 (standard) or DCS 6000 microphone units (requires optional Feature License). In standard DDS 5900 mode, powers up to 60 microphone units and supports up to 250 units. Also supports 2 languages and 32 interpreters. Two analog audio inputs for external sources such as wireless microphones, and 8 analog audio outputs for connection to videoconferencing system, A/V recording equipment, supplemental sound reinforcement system, or wireless language distribution system. With Feature License FL6000, the DIS-CCU can be used with DCS 6000-series microphone units serving up to 250 participants and 4 languages.  Additional Feature Licenses enable support for up to 3,800 participants, 200 interpreters, and 31 languages.   Features: • Fully digital audio transmission of floor plus 31 interpretation channels and 8 conference microphone audio channels in a single digital bus cable structure using shielded CAT5e cables • OLED display on the front enables the user to setup basic system configurations in terms of maximum number of speakers/requests, microphone operation mode, etc. • TCP/IP Ethernet connection for web browser control, integration with optional SW 6000 software suite, or third party external control system (AMX, Crestron, etc.) • Multi-language web browser for system configuration, microphone/request list control and basic operational parameters via tablet or computer • Built-in seat table for attaching seat numbers and names to units using the web browser • 2 Analog audio inputs • 8 Analog audio outputs for distribution of audio from eight groups of units, the floor channel or the interpreter channels • Connection for Emergency Evacuation Message (EEM) is available using ‘Audio In 2’ and a contact closure switch • Firmware upgrade of the entire DCS 6000 system is possible via a PC • Powers up to 60 units without additional power supply (depending on unit type) • Long life, low-noise built-in temperature regulated fan • Horizontal orientation of air stream for easy stacking of units in 19" racks • External control possible via a ‘simple to use’ protocol for external control over Ethernet • Using DCS-LAN, a proprietary high-speed all-digital audio channel, data and power bus • Four DCS-LAN chains powered by one external PS CU power supply • Versatile test program available for testing the system performance, the conference units and the interpreter sets • Video-follow-audio camera control with optional CP 7890 Camera Control System

Description: Details iShopping.pk brings you the best price for Shure Central Control Unit With Power Supply Kit with express shipping all over Pakistan.   The Central Control Unit for DDS 5900 and DCS 6000 Conference Systems from Shure powers up to 60 microphone units and supports up to 250 units. It supports 2 languages and 32 interpreters and can be used in various speech-application environments such as hotel/conference centers, multi-purpose/training rooms, education facilities, corporate/board rooms, courtrooms, and more. Featuring two analog audio inputs for external sources, the Central Control Unit has eight analog audio outputs for connections to videoconferencing systems, A/V recording equipment, supplemental sound reinforcement systems, or wireless language distributions system. In addition, with Feature License FL6000 (sold separately), the DIS-CCU can be used with DCS 6000-series microphone units serving up to 250 participants and 4 languages. Additional Feature Licenses enable support for up to 3,800 participants, 200 interpreters, and 31 languages. • Fully digital audio transmission of floor plus 31 interpretation channels and 8 conference microphone audio channels in a single digital-bus cable structure using shielded CAT5e cables • OLED display on the front enables the user to setup basic system configurations in terms of maximum number of speakers/requests, microphone operation mode, etc. • TCP/IP Ethernet connection for web browser control, integration with optional SW 6000 software suite, or third party external control system (AMX, Crestron, etc.) • 2 analog audio inputs and 8 analog audio outputs for distribution of audio from eight groups of units, the floor channel, or the interpreter channels. • Connection for Emergency Evacuation Message (EEM) is available using 'Audio In 2' and a contact closure switch • Powers up to 60 units without additional power supply (depending on unit type)   Features: • Central Control Unit and Microprocessor • Power Supply for Central Control Unit • For DDS 5900 & DCS 6000 Systems • 4 Modes: Auto, FIFI, VOX, and Manual • 3 Microphone Interrupt Modes • 2 Analog Audio Inputs • Up to 8 Microphones Open at One Time • Scrambles Audio to Avoid Evesdropping • Auto Off of Conference Units   Specifications: System Performance Max Number of Discussion Units For DDS 5900: 250 Powered by CU 5905: 60 Microphones Max Number Open: 8 Languages Interpreter Channels: 2 Max Number of Interpreter Units: 32 Network LAN DCS-LAN Outputs: 4 x RJ45 female sockets TCP/IP 1 x RJ45 female socket Audio Inputs Analog Input 1: 1 x 3-pin female XLR socket (electronically balanced) Analog Input 2 EEM: 1 x 3-pin female XLR socket (electronically balanced) with contact closure Input Level Max: +15 dBm (4.5 Vrms) Input Impedance 50 to 100 kOhms Audio Output 8 x 3-pin XLR (electronically balanced) Maximum load: >1 kOhms Maximum Load >1 kOhms Nominal Output Levels 0 dBm at nominal input Maximum Output Level 4.9 Vrms ~ +16 dBm Electrical Power Consumption 22 W/48 V (150 W max.) Supply Voltage For Microphone Units: 122 W/48 V Sampling Frequency 24-bit/32 kHz Total Harmonic Distortion (THD) Signal to Noise Ratio >85 dBA Mechanical Mounting Tabletop, standard 19" rack. Storage Temperature Range -4 to 140°F (-20 to 60°C) Operating Temperature Range 41 to 104°F (5 to 40°C) Humidity 10 to 80% Dimensions (H x W x D) 1.75 x 16.8 x 7.2" (44.4 x 426 x 186 mm) Weight 6.17 lb (2.8 kg)  

ZK software F18 2.4" TFT RFID Fingerprint Time Attendance Clock + Access Control Brand New Description: F18 is an innovative biometric fingerprint reader for access control applications, offering unparalleled performance using an advanced algorithm for reliability, precision and excellent matching speed. The F18 features the fastest commercial-based fingerprint matching algorithm and ZK high-performance, high-image quality optical fingerprint sensor. The device offers the flexibility to be installed standalone or with any third party panel that supports 26-bit Wiegand. All the operation can be done on the TFT-LCD. The fingerprint image will display on the screen. That will guide the user to put the finger on to proper position and increase the recognition rate. TCP/IP and RS485 are available that the device can be used in different network. Features: Fingerprint reader with durable and highly accurate ZK optical sensor 1 touch a-second user recognition Stores 1,500 templates, 5,000 cards and 30,000 transactions Reads Fingerprint and/or Card Optional integrated smart card reader Built-in Serial and Ethernet ports Tamper-proofs switch and alarm outputs Request-to-exit and alarm contacts Audio-Visual indications for acceptance and rejection of valid/invalid fingers.