5v lithium battery charging

Module name: 3S 12.6V Li-ion Lithium Battery 18650 Charger Protection Board Suitable range: For nominal voltage 3.6V 3.7V lithium battery(Including 18650,26650, lithium polymer batteries) Charging voltage: 12.6V Maximum output current: 20A Maximum output power / charging power: 252W Color: green material: plastic Product size:59*20*3.4mm Product weight: 4.4g Package Contents: 1 PCS x 3 string 12.6V 20A 18650 lithium battery protection board Precautions: 1.Strictly according to the diagram wiring: 0V/4.2V/8.4V/12.6V,Otherwise it will cause damage to the chip. 2.After connection,it need to first charge activation, then will have the output.

Product Name: 3 string 12.6V 40A lithium battery protection board Charging voltage: DC 12.6V~13.6V Continuous discharge current: 40A maximum (if the heat dissipation environment is not good, please reduce the load current) Continuous charging current: up to 20A Balance Version Product size: 41*61*4mm Enhance Version Product size: 41*55*4mm Applicable choice: applicable to the nominal voltage of 3.7V, fully charged 4.2V lithium battery (including 18650, 26650, polymer lithium battery), can be drilled below 170W

Manage the constant current to constant voltage charging of a connected lithium battery Over-discharge protection - keeps your battery from being discharged below 2.4V, a healthy minimum voltage level for your batteryIf a connected battery has been discharged below 2.4V the module will cut output power from the battery until the battery voltage has been re-charged above 3.0V (the over-discharge release voltage), which at that time the module will again allow discharge of power from the battery to a connected load. Although the module cuts output power from the battery during an over-discharge situation, it still allows charging of the battery to occur through the parasitic diode of the discharge control MOSFET (FS8205A Dual MOSFET). Overcharge protection - the module will safely charge your battery to 4.2V Overcurrent and short-circuit protection - the module will cut the output from the battery if the discharge rate exceeds 3A or if a short-circuit condition occurs Soft-start protection limits inrush current Trickle charge (battery reconditioning) - if the voltage level of the connected battery is less than 2.9V, the module will use a trickle charge current of 130mA until the battery voltage reaches 2.9V, at which point the charge current will be linearly increased to the configured charge current.

100% New and High Quality Micro USB TP4056 Dual Charging Module Input Voltage: 4.35V - 6V (recommended voltage 5v) Chargingcut-off Voltage: 4.2V (± 1%) Maximum Charging Current Output: 1000mA (1A) Battery Discharge Protection Voltage: 3.0V Charging Status LEDs:Red LED Charging, Green LED Fully Charged Note: The installation and usgae of these modules require some basic knowledge of electronics, if you dont know how to install, please don't buy it.

The input voltage: 4.35-6 v (recommended voltage 5 v) Charge cut-off voltage: 4.2 V + / – 1% Maximum charging current output: 1000 ma The battery overcharge protection voltage: 4.28 V Battery overcharge lifting voltage: 4.00 V The battery discharge protection voltage: 3.0 V Battery discharge termination voltage: 3.2 V Battery: over-current protection current 3 a The board size: about 2.5 * 1.65 CM Light state: no load the light not bright, red light for recharging, is full of green light.

The input voltage: 4.35-6 v (recommended voltage 5 v) Charge cut-off voltage: 4.2 V + / - 1% Maximum charging current output: 1000 ma The battery overcharge protection voltage: 4.28 V Battery overcharge lifting voltage: 4.00 V The battery discharge protection voltage: 3.0 V Battery discharge termination voltage: 3.2 V Battery: over-current protection current 3 a The board size: about 2.5 * 1.65 CM Light state: no load the light not bright, red light for recharging, is full of green light.

Module based on:TP4056 The module can manage battery charging and discharging, and also has built in boost converter to boost the voltage to match load conditions Charging voltage: 4.2V DC Charging current: Max. 1A Discharging current: Max. 2A Input voltage: 4.5-8V DC Output voltage: 4.3-27V DC (Continuously adjustable) Size: 3.3x2.3cm/1.3x0.91"

DESCRIPTION Features: This is the mobile power module Accessories, 18650 Circuit board shell. Meet the individual needs of your DIY, but you must understand basic electronic assembly. Motherboard comes with protection function: Charging overcharge protection, over-discharge protection, overcurrent protection. Intelligent output device after charging full, automatically stop charging, to prevent mobile phones overcharge. Output voltage and current stable, will not harm user devices. Specifications: Micro USB input: 5V 1A USB Output: 5V 2.1A / 5V 1A(Dual USB interface) Charging display: intelligent digital display Batteries Type: liquid lithium-ion batteries (18650) Product Size: 57mm x 28mm Screen size:27mm x 17mm Installation instructions: The circuit board is connected to the battery negative B-, B + is the positive, do not connecting reversed, connecting reversed will burn the board, the battery is connected in parallel welding, assembling battery. Note that the insulation between the battery and the circuit board, battery lead not to touch the circuit board, so as not to cause a short circuit. Package included: 1 x Mobile Power Bank 18650 Battery Charger PCB Mention that you found this ad on DealMarkaz.pk when you call.

Using the module:Connect micro USB cable for power, or 5V DC to pads marked IN+ and IN- on the left-hand side of the module Connect cell to charge to B+/B- pads on the right-hand side of the module. A load (something for the battery to power) can be connected to the OUT+/OUT- pads on the right-hand side Important! Disconnect load when charging The red LED indicates charging in progress, the green LED indicates charging has finished. Never charge your battery at a rate greater than 1C. 2. It is better thanthe charging current is 37% of the battery capacity. If you charge the battery of 1000mAh, acurrent of 400mAh is enough. 3. The connection wire should not be too thick. 4. Make sure the connect point is good. 5. If the input voltage is too high, like 5.2v, the current will be less than 1000mA, it is normal. It is a protection function, auto-subtract the charging current to avoid burn damage to thechip. 6. NO Reverse polarity.Features:Led indicator: red is charging Green is fully charged. Current Protection: Yes Inversed polarity: NO. Use mature charging chip TP4056 for simple peripheral circuits, good protection performance, and high charging accuracy. Fully machinery automated processing, all patch parts manufacturing.

Description: Details iShopping.pk brings you the best price for M.Mart IP WIFI Wireless Camera & Battery (0267) with express shipping all over Pakistan.   Just need a network and monitor, your  camera could work anytime and anywhere! WiFi Module IP Pinhole Spy  Hidden Camera Mini DVR MW06 is magic and powerful that is quite beyond  your imagination! It is a mini device that with amazing functions. As to this spy camera, it is in meticulous design based on highly advanced  technology and reliable materials, so you can trustingly apply it to  your action.    Specifications: Video Format: AVI Video Coding: M-JPEG Video Resolution Ratio: 640x480 VGA Network Transmission Resolution Ratio:  320x240 QVGA Video Frame Rate:  10fps±1fps Sensor: 1/3" CMOS Antenna: 2.4G 802.11n WIFI Built-in Antenna Storage:  Support TF Card, Max. to 32G Player:  Operating System Built-in or Main Stream Player Image Proportion:  4:3 Support System: Windows,ISO,Android Charging Voltage: DC 5V Interface Type: Mini 5Pin USB Save Support: Micro SD Card(TF Card) Battery Type: High Power Capacity Polymer Lithium Material: ABS Color: Black

Product Highlights 1. Compact appearance and easy to carry2. Fast charging, low consumption3. Three-speed wind speed, adjust with you4. LED Light Feature: USB Rechargeable Product introduction: Input: 100-240V ACOutput: 5V 1A DCPower: 5.4WCharging time: 5 hoursUse time: 3-8 hoursGear position: third gearSize: 15x11.5x5CMMaterial: ABS, PP Product Highlights 1. Compact appearance and easy to carry2. Fast charging, low consumption3. Three-speed wind speed, adjust with you4. LED Light Feature: USB Rechargeable Product introduction: Input: 100-240V ACOutput: 5V 1A DCPower: 5.4WCharging time: 5 hoursUse time: 3-8 hoursGear position: third gearSize: 15x11.5x5CMMaterial: ABS, PP

Compact appearance and easy to carry Fast charging, low consumption Three-speed wind speed, adjust with you LED Light Feature: USB Rechargeable Product introduction: Input: 100-240V ACOutput: 5V 1A DCPower: 5.4WCharging time: 5 hoursUse time: 3-8 hoursGear position: third gearSize: 15x11.5x5CMMaterial: ABS, PP

Product Highlights 1. Compact appearance and easy to carry2. Fast charging, low consumption3. Three-speed wind speed, adjust with you4. LED Light Feature: USB Rechargeable Product introduction: Input: 100-240V ACOutput: 5V 1A DCPower: 5.4WCharging time: 5 hoursUse time: 3-8 hoursGear position: third gearSize: 15x11.5x5CMMaterial: ABS, PP

Description: Details iShopping.pk brings you the best price for Cool Boy Mart Wireless Bluetooth Microphone Mic USB Speaker Red (WS-1816) with express shipping all over Pakistan.   Professional adjustment buttons Treble / Bass / Volume / Father / Reverb can be adjusted by the microphone. Bluetooth wireless microphone and speakers, two-in-one, no additional connection to work independently. The microphone head has three noise reduction processing, more effective highlight your beautiful voice. Bluetooth 4.0 connectivity, able to be paired with Bluetooth enabled devices Excellent sound quality with echo reverberation effect All the applications of ideal singing to speech sound can be used as a bluetooth speakers. Noise Cancellation 1800mAh battery up to 6 hours of singing, enjoy the smart phone APP KTV karaoke effect. Compatibility, suitable for iOS and Android smart phones, iPad tablet PCs, Bluetooth and so on. Multi-purpose: Bluetooth speakers, karaoke singing, car audio, music recording, interviews, podcasts and so on. All the ideal singing voice applications can be used as Bluetooth speakers. This mic can record songs into your phone and share them to your friends. Metal shell protective and super bass loss-less sound create a high-quality listening experience. Distortion is less than 0.5 percent, reduce the loss of sound quality effectively. Fashion outdoor bag design, it can be hung on the bike or taken by hands, let you enjoy music all the way.   Features: • Product Name:ws-1816   •  Supports various smartphones from A pple and A ndroid.   •  Speaker power: 4O 4W*2   •  SNR: =85dB   •  Frequency Response Range: 150~20KHZ   •  Audio Interface: 3.5mm Stereo Headphone Plug   •  built-in 1200MA lithium battery, charging is very convenient   •  Charging time: 3 to 5 hours   •  Play time: Fully charged middle volume 5-8 hours   •  Power Adapter Requirements: Input Voltage: 220V Output ?Voltage: 5V Current 1A/2A   •  Product Size: 54*54*39MM   •  Packing quantity: 40 sets/carton   •  Weight:616g

Description: Details iShopping.pk brings you the best price for Cool Boy Mart Wireless Bluetooth Karaoke Microphone Mic USB Speaker Black (WS-1816) with express shipping all over Pakistan.   Professional adjustment buttons Treble / Bass / Volume / Father / Reverb can be adjusted by the microphone. Bluetooth wireless microphone and speakers, two-in-one, no additional connection to work independently. The microphone head has three noise  reduction processing, more effective highlight your beautiful voice. Bluetooth 4.0 connectivity, able to be  paired with Bluetooth enabled devices Excellent sound quality with echo reverberation effect All the applications of ideal singing to speech sound can be used as a bluetooth speakers. Noise Cancellation 1800mAh battery up to 6 hours of singing, enjoy the smart phone APP KTV karaoke effect. Compatibility, suitable for iOS and Android smart phones, iPad tablet PCs, Bluetooth and so on. Multi-purpose: Bluetooth speakers, karaoke singing, car audio, music recording, interviews, podcasts and so on. All the ideal singing voice applications can be used as Bluetooth speakers. This mic can record songs into your phone and share them to your friends. Metal shell protective and super bass loss-less sound create a high-quality listening experience. Distortion is less than 0.5 percent,  reduce the loss of sound quality effectively. Fashion outdoor bag design, it can be hung on the bike or taken by hands, let you enjoy music all the way.   Features: • Product Name:ws-1816   •  Supports various smartphones from A pple and A ndroid.   •  Speaker power: 4O 4W*2   •  SNR: =85dB   •  Frequency Response Range: 150~20KHZ   •  Audio Interface: 3.5mm Stereo Headphone Plug   •  built-in 1200MA lithium battery, charging is very convenient   •  Charging time: 3 to 5 hours   •  Play time: Fully charged middle volume 5-8 hours   •  Power Adapter Requirements: Input Voltage: 220V Output ?Voltage: 5V Current 1A/2A   •  Product Size: 54*54*39MM   •  Packing quantity: 40 sets/carton   •  Weight:616g